From: Maxime Ripard Date: Mon, 17 Nov 2014 13:42:27 +0000 (+0100) Subject: dmaengine: nbpfaxi: Split device_control X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=e22aec0f0072164e7a2243059715c92ff56016c6;p=deliverable%2Flinux.git dmaengine: nbpfaxi: Split device_control Split the device_control callback of the NBPF AXI DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard Signed-off-by: Vinod Koul --- diff --git a/drivers/dma/nbpfaxi.c b/drivers/dma/nbpfaxi.c index 3d993e785180..0202602597f7 100644 --- a/drivers/dma/nbpfaxi.c +++ b/drivers/dma/nbpfaxi.c @@ -565,13 +565,6 @@ static void nbpf_configure(struct nbpf_device *nbpf) nbpf_write(nbpf, NBPF_CTRL, NBPF_CTRL_LVINT); } -static void nbpf_pause(struct nbpf_channel *chan) -{ - nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SETSUS); - /* See comment in nbpf_prep_one() */ - nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREN); -} - /* Generic part */ /* DMA ENGINE functions */ @@ -837,54 +830,58 @@ static void nbpf_chan_idle(struct nbpf_channel *chan) } } -static int nbpf_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd, - unsigned long arg) +static int nbpf_pause(struct dma_chan *dchan) { struct nbpf_channel *chan = nbpf_to_chan(dchan); - struct dma_slave_config *config; - dev_dbg(dchan->device->dev, "Entry %s(%d)\n", __func__, cmd); + dev_dbg(dchan->device->dev, "Entry %s\n", __func__); - switch (cmd) { - case DMA_TERMINATE_ALL: - dev_dbg(dchan->device->dev, "Terminating\n"); - nbpf_chan_halt(chan); - nbpf_chan_idle(chan); - break; + chan->paused = true; + nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SETSUS); + /* See comment in nbpf_prep_one() */ + nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREN); - case DMA_SLAVE_CONFIG: - if (!arg) - return -EINVAL; - config = (struct dma_slave_config *)arg; + return 0; +} - /* - * We could check config->slave_id to match chan->terminal here, - * but with DT they would be coming from the same source, so - * such a check would be superflous - */ +static int nbpf_terminate_all(struct dma_chan *dchan) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); - chan->slave_dst_addr = config->dst_addr; - chan->slave_dst_width = nbpf_xfer_size(chan->nbpf, - config->dst_addr_width, 1); - chan->slave_dst_burst = nbpf_xfer_size(chan->nbpf, - config->dst_addr_width, - config->dst_maxburst); - chan->slave_src_addr = config->src_addr; - chan->slave_src_width = nbpf_xfer_size(chan->nbpf, - config->src_addr_width, 1); - chan->slave_src_burst = nbpf_xfer_size(chan->nbpf, - config->src_addr_width, - config->src_maxburst); - break; + dev_dbg(dchan->device->dev, "Entry %s\n", __func__); + dev_dbg(dchan->device->dev, "Terminating\n"); - case DMA_PAUSE: - chan->paused = true; - nbpf_pause(chan); - break; + nbpf_chan_halt(chan); + nbpf_chan_idle(chan); - default: - return -ENXIO; - } + return 0; +} + +static int nbpf_config(struct dma_chan *dchan, + struct dma_slave_config *config) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); + + dev_dbg(dchan->device->dev, "Entry %s\n", __func__); + + /* + * We could check config->slave_id to match chan->terminal here, + * but with DT they would be coming from the same source, so + * such a check would be superflous + */ + + chan->slave_dst_addr = config->dst_addr; + chan->slave_dst_width = nbpf_xfer_size(chan->nbpf, + config->dst_addr_width, 1); + chan->slave_dst_burst = nbpf_xfer_size(chan->nbpf, + config->dst_addr_width, + config->dst_maxburst); + chan->slave_src_addr = config->src_addr; + chan->slave_src_width = nbpf_xfer_size(chan->nbpf, + config->src_addr_width, 1); + chan->slave_src_burst = nbpf_xfer_size(chan->nbpf, + config->src_addr_width, + config->src_maxburst); return 0; } @@ -1426,7 +1423,9 @@ static int nbpf_probe(struct platform_device *pdev) /* Compulsory for DMA_SLAVE fields */ dma_dev->device_prep_slave_sg = nbpf_prep_slave_sg; - dma_dev->device_control = nbpf_control; + dma_dev->device_config = nbpf_config; + dma_dev->device_pause = nbpf_pause; + dma_dev->device_terminate_all = nbpf_terminate_all; platform_set_drvdata(pdev, nbpf);