From: Viresh Kumar <viresh.kumar@st.com>
Date: Tue, 17 Apr 2012 11:37:57 +0000 (+0530)
Subject: mtd: fsmc_nand: Add clk_{un}prepare() support
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=e25da1c07dfb318628a8a86f0967914dc4fd135e;p=deliverable%2Flinux.git

mtd: fsmc_nand: Add clk_{un}prepare() support

clk_{un}prepare is mandatory for platforms using common clock framework. Since
this driver is used by SPEAr platform, which supports common clock framework,
add clk_{un}prepare() support for it.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---

diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 1b8330e1155a..9d7f4171e077 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -994,9 +994,9 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 		return PTR_ERR(host->clk);
 	}
 
-	ret = clk_enable(host->clk);
+	ret = clk_prepare_enable(host->clk);
 	if (ret)
-		goto err_clk_enable;
+		goto err_clk_prepare_enable;
 
 	/*
 	 * This device ID is actually a common AMBA ID as used on the
@@ -1176,8 +1176,8 @@ err_req_write_chnl:
 	if (host->mode == USE_DMA_ACCESS)
 		dma_release_channel(host->read_dma_chan);
 err_req_read_chnl:
-	clk_disable(host->clk);
-err_clk_enable:
+	clk_disable_unprepare(host->clk);
+err_clk_prepare_enable:
 	clk_put(host->clk);
 	return ret;
 }
@@ -1198,7 +1198,7 @@ static int fsmc_nand_remove(struct platform_device *pdev)
 			dma_release_channel(host->write_dma_chan);
 			dma_release_channel(host->read_dma_chan);
 		}
-		clk_disable(host->clk);
+		clk_disable_unprepare(host->clk);
 		clk_put(host->clk);
 	}
 
@@ -1210,7 +1210,7 @@ static int fsmc_nand_suspend(struct device *dev)
 {
 	struct fsmc_nand_data *host = dev_get_drvdata(dev);
 	if (host)
-		clk_disable(host->clk);
+		clk_disable_unprepare(host->clk);
 	return 0;
 }
 
@@ -1218,7 +1218,7 @@ static int fsmc_nand_resume(struct device *dev)
 {
 	struct fsmc_nand_data *host = dev_get_drvdata(dev);
 	if (host) {
-		clk_enable(host->clk);
+		clk_prepare_enable(host->clk);
 		fsmc_nand_setup(host->regs_va, host->bank,
 				host->nand.options & NAND_BUSWIDTH_16,
 				host->dev_timings);