From: Jacob Keller Date: Thu, 9 Jun 2016 19:02:03 +0000 (-0700) Subject: fm10k: fix PCI device enable_cnt leak in .io_slot_reset X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=e59a393d089d08a4622de07f941dd3629fcaec6a;p=deliverable%2Flinux.git fm10k: fix PCI device enable_cnt leak in .io_slot_reset A previous patch removed the pci_disable_device() call in .io_error_detected. This call corresponded to a pci_enable_device_mem() call within .io_slot_reset handler. Change the call here to a pci_reenable_device() so that it does not increment and leak the enable_cnt reference count for the device. Without this change, VF devices may fail during an unbind/bind, and we'll never zero the reference counter for the pci_dev structure. Signed-off-by: Jacob Keller Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index 774a5654bf42..377a3fbb779f 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -2275,7 +2275,7 @@ static pci_ers_result_t fm10k_io_slot_reset(struct pci_dev *pdev) { pci_ers_result_t result; - if (pci_enable_device_mem(pdev)) { + if (pci_reenable_device(pdev)) { dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n"); result = PCI_ERS_RESULT_DISCONNECT;