From: Nishanth Menon Date: Mon, 22 Jun 2015 15:12:14 +0000 (-0500) Subject: ARM: DRA7: Provide proper IO map table X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=ea827ad5ffbb78812f6dbdee005e1f364b6bdc58;p=deliverable%2Flinux.git ARM: DRA7: Provide proper IO map table DRA7 uses OMAP5 IO table at the moment. This is purely spurious since the OMAP5 and DRA7 register maps are different in many aspects. AM57xx/DRA7 TRM Reference: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf NOTE: Most of the drivers are already doing ioremap, so, there should'nt be any functional improvement involved here, other than making the initial iotable more accurate. Fixes: a3a9384a1157 ("ARM: DRA7: Reuse io tables and add a new .init_early") Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 34ff14b7beab..b4fbe50672a3 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -297,7 +297,7 @@ static const char *const dra74x_boards_compat[] __initconst = { DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), - .map_io = omap5_map_io, + .map_io = dra7xx_map_io, .init_early = dra7xx_init_early, .init_late = dra7xx_init_late, .init_irq = omap_gic_of_init, @@ -316,7 +316,7 @@ static const char *const dra72x_boards_compat[] __initconst = { DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)") .reserve = omap_reserve, - .map_io = omap5_map_io, + .map_io = dra7xx_map_io, .init_early = dra7xx_init_early, .init_late = dra7xx_init_late, .init_irq = omap_gic_of_init, diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index cf3cf22ecd42..749d50bb4ca5 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -198,6 +198,7 @@ void __init omap3_map_io(void); void __init am33xx_map_io(void); void __init omap4_map_io(void); void __init omap5_map_io(void); +void __init dra7xx_map_io(void); void __init ti81xx_map_io(void); /** diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 820dde8b5b04..c10fb291b99f 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -236,7 +236,7 @@ static struct map_desc omap44xx_io_desc[] __initdata = { }; #endif -#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) +#ifdef CONFIG_SOC_OMAP5 static struct map_desc omap54xx_io_desc[] __initdata = { { .virtual = L3_54XX_VIRT, @@ -265,6 +265,53 @@ static struct map_desc omap54xx_io_desc[] __initdata = { }; #endif +#ifdef CONFIG_SOC_DRA7XX +static struct map_desc dra7xx_io_desc[] __initdata = { + { + .virtual = L4_CFG_MPU_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_CFG_MPU_DRA7XX_PHYS), + .length = L4_CFG_MPU_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L3_MAIN_SN_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L3_MAIN_SN_DRA7XX_PHYS), + .length = L3_MAIN_SN_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER1_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_PER1_DRA7XX_PHYS), + .length = L4_PER1_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER2_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_PER2_DRA7XX_PHYS), + .length = L4_PER2_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER3_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_PER3_DRA7XX_PHYS), + .length = L4_PER3_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_CFG_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_CFG_DRA7XX_PHYS), + .length = L4_CFG_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_WKUP_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_WKUP_DRA7XX_PHYS), + .length = L4_WKUP_DRA7XX_SIZE, + .type = MT_DEVICE, + }, +}; +#endif + #ifdef CONFIG_SOC_OMAP2420 void __init omap242x_map_io(void) { @@ -309,12 +356,19 @@ void __init omap4_map_io(void) } #endif -#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) +#ifdef CONFIG_SOC_OMAP5 void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); } #endif + +#ifdef CONFIG_SOC_DRA7XX +void __init dra7xx_map_io(void) +{ + iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc)); +} +#endif /* * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters * diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h index cce2b65039f1..6191d244438a 100644 --- a/arch/arm/mach-omap2/iomap.h +++ b/arch/arm/mach-omap2/iomap.h @@ -194,3 +194,66 @@ #define L4_PER_54XX_PHYS L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */ #define L4_PER_54XX_VIRT (L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_54XX_SIZE SZ_4M + +/* + * ---------------------------------------------------------------------------- + * DRA7xx specific IO mapping + * ---------------------------------------------------------------------------- + */ +/* + * L3_MAIN_SN_DRA7XX_PHYS 0x44000000 --> 0xf8000000 + * The overall space is 24MiB (0x4400_0000<->0x457F_FFFF), but mapping + * everything is just inefficient, since, there are too many address holes. + */ +#define L3_MAIN_SN_DRA7XX_PHYS L3_MAIN_SN_DRA7XX_BASE +#define L3_MAIN_SN_DRA7XX_VIRT (L3_MAIN_SN_DRA7XX_PHYS + OMAP4_L3_IO_OFFSET) +#define L3_MAIN_SN_DRA7XX_SIZE SZ_1M + +/* + * L4_PER1_DRA7XX_PHYS (0x4800_000<>0x480D_2FFF) -> 0.82MiB (alloc 1MiB) + * (0x48000000<->0x48100000) <=> (0xFA000000<->0xFA100000) + */ +#define L4_PER1_DRA7XX_PHYS L4_PER1_DRA7XX_BASE +#define L4_PER1_DRA7XX_VIRT (L4_PER1_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER1_DRA7XX_SIZE SZ_1M + +/* + * L4_CFG_MPU_DRA7XX_PHYS (0x48210000<>0x482A_F2FF) -> 0.62MiB (alloc 1MiB) + * (0x48210000<->0x48310000) <=> (0xFA210000<->0xFA310000) + * NOTE: This is a bit of an orphan memory map sitting isolated in TRM + */ +#define L4_CFG_MPU_DRA7XX_PHYS L4_CFG_MPU_DRA7XX_BASE +#define L4_CFG_MPU_DRA7XX_VIRT (L4_CFG_MPU_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_CFG_MPU_DRA7XX_SIZE SZ_1M + +/* + * L4_PER2_DRA7XX_PHYS (0x4840_0000<>0x4848_8FFF) -> .53MiB (alloc 1MiB) + * (0x48400000<->0x48500000) <=> (0xFA400000<->0xFA500000) + */ +#define L4_PER2_DRA7XX_PHYS L4_PER2_DRA7XX_BASE +#define L4_PER2_DRA7XX_VIRT (L4_PER2_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER2_DRA7XX_SIZE SZ_1M + +/* + * L4_PER3_DRA7XX_PHYS (0x4880_0000<>0x489E_0FFF) -> 1.87MiB (alloc 2MiB) + * (0x48800000<->0x48A00000) <=> (0xFA800000<->0xFAA00000) + */ +#define L4_PER3_DRA7XX_PHYS L4_PER3_DRA7XX_BASE +#define L4_PER3_DRA7XX_VIRT (L4_PER3_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER3_DRA7XX_SIZE SZ_2M + +/* + * L4_CFG_DRA7XX_PHYS (0x4A00_0000<>0x4A22_BFFF) ->2.17MiB (alloc 3MiB)? + * (0x4A000000<->0x4A300000) <=> (0xFC000000<->0xFC300000) + */ +#define L4_CFG_DRA7XX_PHYS L4_CFG_DRA7XX_BASE +#define L4_CFG_DRA7XX_VIRT (L4_CFG_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_CFG_DRA7XX_SIZE (SZ_1M + SZ_2M) + +/* + * L4_WKUP_DRA7XX_PHYS (0x4AE0_0000<>0x4AE3_EFFF) -> .24 mb (alloc 1MiB)? + * (0x4AE00000<->4AF00000) <=> (0xFCE00000<->0xFCF00000) + */ +#define L4_WKUP_DRA7XX_PHYS L4_WKUP_DRA7XX_BASE +#define L4_WKUP_DRA7XX_VIRT (L4_WKUP_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_WKUP_DRA7XX_SIZE SZ_1M diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index 2d35c5709408..0ca8e938096b 100644 --- a/arch/arm/mach-omap2/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h @@ -30,6 +30,14 @@ #define OMAP54XX_CTRL_BASE 0x4a002800 #define OMAP54XX_SAR_RAM_BASE 0x4ae26000 +/* DRA7 specific base addresses */ +#define L3_MAIN_SN_DRA7XX_BASE 0x44000000 +#define L4_PER1_DRA7XX_BASE 0x48000000 +#define L4_CFG_MPU_DRA7XX_BASE 0x48210000 +#define L4_PER2_DRA7XX_BASE 0x48400000 +#define L4_PER3_DRA7XX_BASE 0x48800000 +#define L4_CFG_DRA7XX_BASE 0x4A000000 +#define L4_WKUP_DRA7XX_BASE 0x4ae00000 #define DRA7XX_CM_CORE_AON_BASE 0x4a005000 #define DRA7XX_CTRL_BASE 0x4a003400 #define DRA7XX_TAP_BASE 0x4ae0c000