From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 31 Oct 2011 22:42:23 +0000 (+0100)
Subject: Merge branch 'stericsson/cleanup' into next/timer
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=eed1e576507b52e03e549e0c9e0c747978122403;p=deliverable%2Flinux.git

Merge branch 'stericsson/cleanup' into next/timer

The timer and cleanup branches from stericsson conflict,
so I'm merging them here.

Conflicts:
	arch/arm/mach-ux500/Makefile
	arch/arm/mach-ux500/cpu.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---

eed1e576507b52e03e549e0c9e0c747978122403
diff --cc arch/arm/mach-ux500/Makefile
index be915a1ac404,9fd00a6d4248..6bd2f451c185
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@@ -3,7 -3,8 +3,8 @@@
  #
  
  obj-y				:= clock.o cpu.o devices.o devices-common.o \
 -				   id.o usb.o
 +				   id.o usb.o timer.o
+ obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
  obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
  obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
  obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
diff --cc arch/arm/mach-ux500/cpu.c
index 797f3642fc30,252e8b3c5706..1405d0eb7edb
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@@ -10,10 -10,7 +10,8 @@@
  #include <linux/clk.h>
  #include <linux/mfd/db8500-prcmu.h>
  #include <linux/mfd/db5500-prcmu.h>
 +#include <linux/clksrc-dbx500-prcmu.h>
  
- #include <asm/cacheflush.h>
- #include <asm/hardware/cache-l2x0.h>
  #include <asm/hardware/gic.h>
  #include <asm/mach/map.h>
  #include <asm/localtimer.h>
@@@ -56,66 -50,30 +50,3 @@@ void __init ux500_init_irq(void
  		prcmu_early_init();
  	clk_init();
  }
- 
- #ifdef CONFIG_CACHE_L2X0
- static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
- {
- 	/* wait for the operation to complete */
- 	while (readl_relaxed(reg) & mask)
- 		;
- }
- 
- static inline void ux500_cache_sync(void)
- {
- 	void __iomem *base = l2x0_base;
- 
- 	writel_relaxed(0, base + L2X0_CACHE_SYNC);
- 	ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
- }
- 
- /*
-  * The L2 cache cannot be turned off in the non-secure world.
-  * Dummy until a secure service is in place.
-  */
- static void ux500_l2x0_disable(void)
- {
- }
- 
- /*
-  * This is only called when doing a kexec, just after turning off the L2
-  * and L1 cache, and it is surrounded by a spinlock in the generic version.
-  * However, we're not really turning off the L2 cache right now and the
-  * PL310 does not support exclusive accesses (used to implement the spinlock).
-  * So, the invalidation needs to be done without the spinlock.
-  */
- static void ux500_l2x0_inv_all(void)
- {
- 	void __iomem *base = l2x0_base;
- 	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
- 
- 	/* invalidate all ways */
- 	writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
- 	ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
- 	ux500_cache_sync();
- }
--
- static int ux500_l2x0_init(void)
 -static void __init ux500_timer_init(void)
--{
 -#ifdef CONFIG_LOCAL_TIMERS
 -	/* Setup the local timer base */
--	if (cpu_is_u5500())
- 		l2x0_base = __io_address(U5500_L2CC_BASE);
 -		twd_base = __io_address(U5500_TWD_BASE);
--	else if (cpu_is_u8500())
- 		l2x0_base = __io_address(U8500_L2CC_BASE);
 -		twd_base = __io_address(U8500_TWD_BASE);
--	else
--		ux500_unknown_soc();
- 
- 	/* 64KB way size, 8 way associativity, force WA */
- 	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
- 
- 	/* Override invalidate function */
- 	outer_cache.disable = ux500_l2x0_disable;
- 	outer_cache.inv_all = ux500_l2x0_inv_all;
 -#endif
 -	if (cpu_is_u5500())
 -		mtu_base = __io_address(U5500_MTU0_BASE);
 -	else if (cpu_is_u8500ed())
 -		mtu_base = __io_address(U8500_MTU0_BASE_ED);
 -	else if (cpu_is_u8500())
 -		mtu_base = __io_address(U8500_MTU0_BASE);
 -	else
 -		ux500_unknown_soc();
--
- 	return 0;
 -	nmdk_timer_init();
--}
- early_initcall(ux500_l2x0_init);
- #endif
 -
 -struct sys_timer ux500_timer = {
 -	.init	= ux500_timer_init,
 -};