From: Krzysztof Kozlowski Date: Mon, 9 May 2016 06:19:49 +0000 (+0200) Subject: ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=f4715dc7eb89e1e776ab2c260cb008617490f931;p=deliverable%2Flinux.git ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes Include the CPU thermal nodes directly in Odroid XU3-family common DTS because it is the only user of it. Keeping it in separate DTSI file does not bring benefits because: 1. It is not re-usable on other non-fan boards (fan is referenced), 2. It won't be re-used on future Odroid XU board because different CPU cluster behavior. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Tested-by: Anand Moon --- diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi deleted file mode 100644 index 3e4c4ad96d63..000000000000 --- a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Device tree sources for Exynos5422 thermal zone - * - * Copyright (c) 2015 Lukasz Majewski - * Anand Moon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -/ { - thermal-zones { - cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmu_cpu0 0>; - polling-delay-passive = <250>; - polling-delay = <0>; - trips { - cpu_alert0: cpu-alert-0 { - temperature = <50000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu_alert1: cpu-alert-1 { - temperature = <60000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu_alert2: cpu-alert-2 { - temperature = <70000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu_crit0: cpu-crit-0 { - temperature = <120000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - /* - * Exyunos542x support only 4 trip-points - * so for these polling mode is required. - * Start polling at temperature level of last - * interrupt-driven trip: cpu_alert2 - */ - cpu_alert3: cpu-alert-3 { - temperature = <70000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert4: cpu-alert-4 { - temperature = <85000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - - }; - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = <&fan0 0 1>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 1 2>; - }; - map2 { - trip = <&cpu_alert2>; - cooling-device = <&fan0 2 3>; - }; - /* - * When reaching cpu_alert3, reduce CPU - * by 2 steps. On Exynos5422/5800 that would - * be: 1500 MHz and 1100 MHz. - */ - map3 { - trip = <&cpu_alert3>; - cooling-device = <&cpu0 0 2>; - }; - map4 { - trip = <&cpu_alert3>; - cooling-device = <&cpu4 0 2>; - }; - - /* - * When reaching cpu_alert4, reduce CPU - * further, down to 600 MHz (11 steps for big, - * 7 steps for LITTLE). - */ - map5 { - trip = <&cpu_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { - trip = <&cpu_alert4>; - cooling-device = <&cpu4 3 11>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 2a4e10bc8801..48c92b428954 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -1,9 +1,11 @@ /* * Hardkernel Odroid XU3 board device tree source * - * Copyright (c) 2014 Collabora Ltd. * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2015 Lukasz Majewski + * Anand Moon * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,7 +18,6 @@ #include #include "exynos5800.dtsi" #include "exynos5422-cpus.dtsi" -#include "exynos5422-cpu-thermal.dtsi" / { memory { @@ -54,6 +55,94 @@ #cooling-cells = <2>; cooling-levels = <0 130 170 230>; }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <70000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + /* + * Exynos542x supports only 4 trip-points + * so for these polling mode is required. + * Start polling at temperature level of last + * interrupt-driven trip: cpu_alert2 + */ + cpu_alert3: cpu-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert4: cpu-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + /* + * When reaching cpu_alert3, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1600 MHz and 1100 MHz. + */ + map3 { + trip = <&cpu_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu_alert3>; + cooling-device = <&cpu4 0 2>; + }; + + /* + * When reaching cpu_alert4, reduce CPU + * further, down to 600 MHz (11 steps for big, + * 7 steps for LITTLE). + */ + map5 { + trip = <&cpu_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu_alert4>; + cooling-device = <&cpu4 3 11>; + }; + }; + }; + }; }; &bus_wcore {