From: Prabhakar Kushwaha Date: Wed, 15 Aug 2012 15:13:52 +0000 (+0530) Subject: powerpc: Update Integrated Flash controller device tree bindings X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=f4dfef75adb12fec7693d0c469e2de6c7d45e975;p=deliverable%2Flinux.git powerpc: Update Integrated Flash controller device tree bindings Freescale's Integrated Flash controller (IFC) may have one or two interrupts. In case of single interrupt line, it will cover all IFC interrupts. Update this information in IFC device tree bindings Signed-off-by: Prabhakar Kushwaha Signed-off-by: Kumar Gala --- diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt index 939a26d541f6..d5e370450ac0 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt @@ -12,9 +12,12 @@ Properties: - #size-cells : Either one or two, depending on how large each chipselect can be. - reg : Offset and length of the register set for the device -- interrupts : IFC has two interrupts. The first one is the "common" - interrupt(CM_EVTER_STAT), and second is the NAND interrupt - (NAND_EVTER_STAT). +- interrupts: IFC may have one or two interrupts. If two interrupt + specifiers are present, the first is the "common" + interrupt (CM_EVTER_STAT), and the second is the NAND + interrupt (NAND_EVTER_STAT). If there is only one, + that interrupt reports both types of event. + - ranges : Each range corresponds to a single chipselect, and covers the entire access window as configured.