From: Stas Sergeev Date: Sun, 2 Sep 2007 06:56:18 +0000 (-0300) Subject: V4L/DVB (6144): Fix mux setup for composite sound on AverTV 307 X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=f5e4feead773cb449212eacfa254a238a953d4d5;p=deliverable%2Flinux.git V4L/DVB (6144): Fix mux setup for composite sound on AverTV 307 Right now the composite sound input doesn't work on AverTV 307 because of the wrong mux setup. The composite sound is routed via an external 4channel multiplexer controlled by GPIO, while the code assumes an internal multiplexer instead. Presumably this was a copy/paste error, and noone have ever tested the functionality. With the attached patch it works properly, which gives me an ability to finally watch the cable TV under linux. Signed-off-by: Stas Sergeev Signed-off-by: Andrew Morton Acked-by: Nickolay V. Shmyrev Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 8ec83bd70094..25ec16810818 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -1537,18 +1537,18 @@ struct saa7134_board saa7134_boards[] = { },{ .name = name_comp1, .vmux = 0, - .amux = LINE2, - .gpio = 0x00, + .amux = LINE1, + .gpio = 0x02, },{ .name = name_comp2, .vmux = 3, - .amux = LINE2, - .gpio = 0x00, + .amux = LINE1, + .gpio = 0x02, },{ .name = name_svideo, .vmux = 8, - .amux = LINE2, - .gpio = 0x00, + .amux = LINE1, + .gpio = 0x02, }}, .radio = { .name = name_radio,