Mike Turquette [Thu, 16 Jan 2014 21:13:46 +0000 (13:13 -0800)]
Merge remote-tracking branch 'linaro/clk-next' into clk-next
Stephen Boyd [Wed, 15 Jan 2014 18:47:34 +0000 (10:47 -0800)]
devicetree: bindings: Document qcom,mmcc
Document the multimedia clock controller found on Qualcomm devices
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:33 +0000 (10:47 -0800)]
devicetree: bindings: Document qcom,gcc
Document the global clock controller found on Qualcomm devices.
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:32 +0000 (10:47 -0800)]
clk: qcom: Add support for MSM8660's global clock controller (GCC)
Add a driver for the global clock controller found on MSM8660
based platforms. This should allow most non-multimedia device
drivers to probe and control their clocks.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:31 +0000 (10:47 -0800)]
clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)
Add a driver for the global clock controller found on MSM 8974
based platforms. This should allow most multimedia device drivers
to probe and control their clocks.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:30 +0000 (10:47 -0800)]
clk: qcom: Add support for MSM8974's global clock controller (GCC)
Add a driver for the global clock controller found on MSM 8974
based platforms. This should allow most non-multimedia device
drivers to probe and control their clocks.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:29 +0000 (10:47 -0800)]
clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)
Add a driver for the multimedia clock controller found on MSM
8960 based platforms. This should allow multimedia device drivers
to probe and control their clocks.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:28 +0000 (10:47 -0800)]
clk: qcom: Add support for MSM8960's global clock controller (GCC)
Add a driver for the global clock controller found on MSM8960
based platforms. This should allow most non-multimedia device
drivers to probe and control their clocks.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:27 +0000 (10:47 -0800)]
clk: qcom: Add reset controller support
Reset controllers and clock controllers are combined into one IP
block on Qualcomm chipsets. Usually a reset signal is associated
with each clock branch but sometimes a reset signal is associated
with a handful of clocks. Either way the register interface is
the same; set a bit to assert a reset and clear a bit to deassert
a reset. Add support for these types of resets signals.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:26 +0000 (10:47 -0800)]
clk: qcom: Add support for branches/gate clocks
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:25 +0000 (10:47 -0800)]
clk: qcom: Add support for root clock generators (RCGs)
Add support for the root clock generators on Qualcomm devices.
RCGs are highly customizable mux/divider/counter clocks that can
be used to generate almost any rate desired given some input
source that is faster than the desired rate.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:24 +0000 (10:47 -0800)]
clk: qcom: Add support for phase locked loops (PLLs)
Add support for Qualcomm's PLLs (phase locked loops). This is
sufficient enough to be able to determine the rate the PLL is
running at. We can add rate setting support later when it's
needed.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:23 +0000 (10:47 -0800)]
clk: qcom: Add a regmap type clock struct
Add a clock type that associates a regmap pointer and some
enable/disable bits with a clk_hw struct. This will be the struct
that a hw specific implementation wraps if it wants to use the
regmap helper functions.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:22 +0000 (10:47 -0800)]
clk: Add set_rate_and_parent() op
Some of Qualcomm's clocks can change their parent and rate at the
same time with a single register write. Add support for this
hardware to the common clock framework by adding a new
set_rate_and_parent() op. When the clock framework determines
that both the parent and the rate are going to change during
clk_set_rate() it will call the .set_rate_and_parent() op if
available and fall back to calling .set_parent() followed by
.set_rate() otherwise.
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Stephen Boyd [Wed, 15 Jan 2014 18:47:21 +0000 (10:47 -0800)]
reset: Silence warning in reset-controller.h
If a user of <linux/reset-controller.h> doesn't include
<linux/of.h> before including reset-controller.h they'll get a
warning as follows:
include/linux/reset-controller.h:44:17:
warning: 'struct of_phandle_args' declared inside parameter list
This is because of_phandle_args is not forward declared. Add the
declaration to silence this warning.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Barry Song [Wed, 15 Jan 2014 06:11:34 +0000 (14:11 +0800)]
clk: sirf: re-arch to make the codes support both prima2 and atlas6
sirfprima2 and sirfatlas6 are two different SoCs in CSR SiRF series. for
prima2 and atlas6, there are many shared clocks but there are still
some different register layout and hardware clocks, then result in
different clock table.
here we re-arch the driver to
1. clk-common.c provides common clocks for prima2 and atlas6,
2. clk-prima2.h describles registers of prima2 and clk-prima2.c provides
prima2 specific clocks and clock table.
3. clk-atlas6.h describles registers of atlas6 and clk-atlas6.c provides
atlas6 specific clocks and clock table.
4. clk.h and clk.c expose external interfaces and provide uniform entry
for both prima2 and atlas6.
so both prima2 and atlas6 will get support by drivers/clk/sirf.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Mike Turquette [Tue, 14 Jan 2014 20:56:01 +0000 (12:56 -0800)]
clk: composite: pass mux_hw into determine_rate
The composite clock's .determine_rate implementation can call the
underyling .determine_rate callback corresponding to rate_hw or the
underlying .determine_rate callback corresponding to mux_hw. In both
cases we pass in rate_hw, which is wrong. Fixed by passing mux_hw into
the correct callback.
Reported-by: Lemon Dai <dailemon.gl@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Mike Turquette [Tue, 14 Jan 2014 19:41:26 +0000 (11:41 -0800)]
Merge branch 'clk-next-shmobile' into clk-next
Valentine Barshak [Sat, 28 Dec 2013 12:09:09 +0000 (16:09 +0400)]
clk: shmobile: Fix MSTP clock array initialization
The clks member of the clk_onecell_data structure should
point to a valid clk array (no NULL entries allowed),
and the clk_num should be equal to the number
of elements in the clks array.
The MSTP driver fails to satisfy the above conditions.
The clks array may contain NULL entries if not all
clock-indices are initialized in the device tree.
Thus, if the clock indices are interleaved we end up
with NULL pointers in-between.
The other problem is the driver uses maximum clock index
as the number of clocks, which is incorrect (less than
the actual number of clocks by 1).
Fix the first issue by pre-setting the whole clks array
with ERR_PTR(-ENOENT) pointers instead of zeros; and
use maximum clkidx + 1 as the number of clocks to fix
the other one.
This should make of_clk_src_onecell_get() return the following:
* valid clk pointers for all clocks registered;
* ERR_PTR(-EINVAL) if (idx >= clk_data->clk_num);
* ERR_PTR(-ENOENT) if the clock at the selected index was not
initialized in the device tree (and was not registered).
Changes in V2:
* removed brackets from the one-line for loop
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Valentine Barshak [Sat, 28 Dec 2013 12:09:08 +0000 (16:09 +0400)]
clk: shmobile: Fix MSTP clock index
Use clkidx when registering MSTP clocks instead of loop counter
since the value is then used to access the specific clock index bit
in the mstp register.
The issue was introduced by the following commit:
f94859c215b6d977 "clk: shmobile: Add MSTP clock support"
Changes in V2:
* none
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Mike Turquette [Thu, 9 Jan 2014 00:38:10 +0000 (16:38 -0800)]
Merge tag 'for_3.14/samsung-clk' of git://git./linux/kernel/git/tfiga/samsung-clk into clk-next-samsung
(A bit late) first round of Samsung clock patches for v3.14.
Tomasz Figa [Thu, 12 Dec 2013 16:07:21 +0000 (17:07 +0100)]
ARM: dts: Add clock provider specific properties to max77686 node
This patch adds a label and #clock-cells property to device node of
max77686 PMIC to allow using it as a clock provider.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Tomasz Figa [Thu, 12 Dec 2013 16:07:20 +0000 (17:07 +0100)]
clk: max77686: Register OF clock provider
If max77686 chip is instantiated from device tree, it is desirable to
have an OF clock provider to allow device tree based look-up of clocks.
This patch adds OF clock provider registration to the clk-max77686
driver.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Tomasz Figa [Thu, 12 Dec 2013 16:07:19 +0000 (17:07 +0100)]
clk: max77686: Refactor driver data handling
As a prerequisite for further patch adding OF clock provider support to
the driver, this patch changes the driver to store an array of struct
clk * as driver data.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Tomasz Figa [Thu, 12 Dec 2013 16:07:18 +0000 (17:07 +0100)]
clk: max77686: Fix clean-up in error and remove paths
This patch fixes invalid kfree() and adds missing call to clk_unregister()
in error and remove paths in max77686_clk_probe(). While at it, error
handling is also cleaned up.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Tomasz Figa [Thu, 12 Dec 2013 16:07:17 +0000 (17:07 +0100)]
clk: max77686: Make max77686_clk_register() return struct clk *
As a preparation for further patches, this patch modifies the clock
registration helper function to return a pointer to the newly registered
clock. No functional change is done to the driver.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Tomasz Figa [Thu, 12 Dec 2013 16:07:16 +0000 (17:07 +0100)]
clk: max77686: Refactor successful exit of probe function
The function can simply return 0, without jumping to a separate label,
which does exactly the same. This patch does not introduce any
functional change, just a clean-up.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Tomasz Figa [Thu, 12 Dec 2013 16:07:15 +0000 (17:07 +0100)]
clk: max77686: Provide .recalc_rate() operation
It is usually nice to know frequency of a clock, so this patch adds a
.recalc_rate() callback returning rates of provided clocks.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Tomasz Figa [Thu, 12 Dec 2013 16:07:14 +0000 (17:07 +0100)]
clk: max77686: Correct callback used for checking clock status
Changing status of clock gates in max77686 requires i2c transfers, which
can sleep, so this is done in prepare and unprepare callbacks. Due to
this, checking whether whether the clock is ungated must be done
in is_prepared() callback as well, for consistency.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Tomasz Figa [Sat, 9 Nov 2013 02:17:34 +0000 (03:17 +0100)]
MAINTAINERS: Add entry for Samsung SoC clock drivers
This patch adds an entry for Samsung SoC clock drivers located under
drivers/clk/samsung/ directory, with me taking the maintainer role.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Andrew Bresticker [Wed, 25 Sep 2013 21:12:52 +0000 (14:12 -0700)]
ARM: dts: exynos5420: add input clocks to audss clock controller
Specify the remaining input clocks (pll_ref, pll_in, and sclk_pcm_in)
for the AudioSS clock controller.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrew Bresticker [Wed, 25 Sep 2013 21:12:51 +0000 (14:12 -0700)]
clk: exynos-audss: add support for Exynos 5420
The AudioSS block on Exynos 5420 has an additional clock gate for the
ADMA bus clock.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrew Bresticker [Wed, 25 Sep 2013 21:12:50 +0000 (14:12 -0700)]
ARM: dts: exynos5250: add input clocks to audss clock controller
Specify pll_ref, pll_in, sclk_audio, and sclk_pcm_in for the AudioSS
clock controller.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrew Bresticker [Wed, 25 Sep 2013 21:12:49 +0000 (14:12 -0700)]
clk: exynos5250: add clock ID for div_pcm0
There is no gate for the PCM clock input to the AudioSS block, so
the parent of sclk_pcm is div_pcm0. Add a clock ID for it so that
we can reference it in device trees.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrew Bresticker [Wed, 25 Sep 2013 21:12:48 +0000 (14:12 -0700)]
clk: exynos-audss: allow input clocks to be specified in device tree
This allows the input clocks to the Exynos AudioSS block to be
specified via device-tree bindings. Default names will be used
when an input clock is not given.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrew Bresticker [Wed, 25 Sep 2013 21:12:47 +0000 (14:12 -0700)]
clk: exynos-audss: convert to platform device
The Exynos AudioSS clock controller will later be modified to allow
input clocks to be specified via device-tree in order to support
multiple Exynos SoCs. This will introduce a dependency on the core
SoC clock controller being initialized first so that the AudioSS driver
can look up its input clocks, but the order in which clock providers
are probed in of_clk_init() is not guaranteed. Since deferred probing
is not supported in of_clk_init() and the AudioSS block is not the core
controller, we can initialize it later as a platform device.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrzej Hajda [Tue, 7 Jan 2014 14:47:40 +0000 (15:47 +0100)]
clk: exynos5440: replace clock ID private enums with IDs from DT header
The patch replaces private enum clock IDs in the driver with macros provided
by the DT header.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrzej Hajda [Tue, 7 Jan 2014 14:47:38 +0000 (15:47 +0100)]
ARM: exynos5440: create a DT header defining CLK IDs
The patch adds header file defining clock IDs.
This allows to use macros instead of magic numbers in DT bindings.
Signed-off-by: Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrzej Hajda [Tue, 7 Jan 2014 14:47:37 +0000 (15:47 +0100)]
clk: exynos5420: replace clock ID private enums with IDs from DT header
The patch replaces private enum clock IDs in the driver with macros provided
by the DT header.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrzej Hajda [Tue, 7 Jan 2014 14:47:35 +0000 (15:47 +0100)]
ARM: exynos5420: create a DT header defining CLK IDs
The patch adds header file defining clock IDs.
This allows to use macros instead of magic numbers in DT bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrzej Hajda [Tue, 7 Jan 2014 14:47:34 +0000 (15:47 +0100)]
clk: exynos5250: replace clock ID private enums with IDs from DT header
The patch replaces private enum clock IDs in the driver with macros provided
by the DT header.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrzej Hajda [Tue, 7 Jan 2014 14:47:32 +0000 (15:47 +0100)]
ARM: exynos5250: create a DT header defining CLK IDs
The patch adds header file defining clock IDs.
This allows to use macros instead of magic numbers in DT bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrzej Hajda [Tue, 7 Jan 2014 14:47:31 +0000 (15:47 +0100)]
clk: exynos4: replace clock ID private enums with IDs from DT header
The patch replaces private enum clock IDs in the driver with macros provided
by the DT header.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrzej Hajda [Tue, 7 Jan 2014 14:47:29 +0000 (15:47 +0100)]
ARM: exynos4: create a DT header defining CLK IDs
The patch adds header file defining clock IDs.
This allows to use macros instead of magic numbers in DT bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrew Bresticker [Fri, 8 Nov 2013 10:14:08 +0000 (15:44 +0530)]
clk: exynos5250: register APLL rate table
Register the APLL rate table so that we can set the APLL rate from
the cpufreq driver.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Linus Torvalds [Sat, 4 Jan 2014 23:12:14 +0000 (15:12 -0800)]
Linux 3.13-rc7
Linus Torvalds [Fri, 3 Jan 2014 21:48:25 +0000 (13:48 -0800)]
Merge tag 'for-v3.13-fixes' of git://git.infradead.org/battery-2.6
Pull battery fixes from Anton Vorontsov:
"Two fixes:
- fix build error caused by max17042_battery conversion to the regmap
API.
- fix kernel oops when booting with wakeup_source_activate enabled"
* tag 'for-v3.13-fixes' of git://git.infradead.org/battery-2.6:
max17042_battery: Fix build errors caused by missing REGMAP_I2C config
power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate
Linus Torvalds [Fri, 3 Jan 2014 21:44:41 +0000 (13:44 -0800)]
Merge tag 'pm+acpi-3.13-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI and PM fixes and new device IDs from Rafael Wysocki:
"These commits, except for one, are regression fixes and the remaining
one fixes a divide error leading to a kernel panic. The majority of
the regressions fixed here were introduced during the 3.12 cycle, one
of them is from this cycle and one is older.
Specifics:
- VGA switcheroo was broken for some users as a result of the
ACPI-based PCI hotplug (ACPIPHP) changes in 3.12, because some
previously ignored hotplug events started to be handled. The fix
causes them to be ignored again.
- There are two more issues related to cpufreq's suspend/resume
handling changes from the 3.12 cycle addressed by Viresh Kumar's
fixes.
- intel_pstate triggers a divide error in a timer function if the
P-state information it needs is missing during initialization.
This leads to kernel panics on nested KVM clients and is fixed by
failing the initialization cleanly in those cases.
- PCI initalization code changes during the 3.9 cycle uncovered BIOS
issues related to ACPI wakeup notifications (some BIOSes send them
for devices that aren't supposed to support ACPI wakeup). Work
around them by installing an ACPI wakeup notify handler for all PCI
devices with ACPI support.
- The Calxeda cpuilde driver's probe function is tagged as __init,
which is incorrect and causes a section mismatch to occur during
build. Fix from Andre Przywara removes the __init tag from there.
- During the 3.12 cycle ACPIPHP started to print warnings about
missing _ADR for devices that legitimately don't have it. Fix from
Toshi Kani makes it only print the warnings where they make sense"
* tag 'pm+acpi-3.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug
intel_pstate: Fail initialization if P-state information is missing
ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function
PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI
cpufreq: preserve user_policy across suspend/resume
cpufreq: Clean up after a failing light-weight initialization
ACPI / PCI / hotplug: Avoid warning when _ADR not present
Linus Torvalds [Thu, 2 Jan 2014 22:50:18 +0000 (14:50 -0800)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm bugfixes from Marcelo Tosatti.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: Unconditionally uninit the MMU on nested vmexit
KVM: x86: Fix APIC map calculation after re-enabling
Linus Torvalds [Thu, 2 Jan 2014 22:40:38 +0000 (14:40 -0800)]
Merge branch 'akpm' (incoming from Andrew)
Merge patches from Andrew Morton:
"Ten fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
epoll: do not take the nested ep->mtx on EPOLL_CTL_DEL
sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c
drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test()
mm/memory-failure.c: transfer page count from head page to tail page after split thp
MAINTAINERS: set up proper record for Xilinx Zynq
mm: remove bogus warning in copy_huge_pmd()
memcg: fix memcg_size() calculation
mm: fix use-after-free in sys_remap_file_pages
mm: munlock: fix deadlock in __munlock_pagevec()
mm: munlock: fix a bug where THP tail page is encountered
Jason Baron [Thu, 2 Jan 2014 20:58:54 +0000 (12:58 -0800)]
epoll: do not take the nested ep->mtx on EPOLL_CTL_DEL
The EPOLL_CTL_DEL path of epoll contains a classic, ab-ba deadlock.
That is, epoll_ctl(a, EPOLL_CTL_DEL, b, x), will deadlock with
epoll_ctl(b, EPOLL_CTL_DEL, a, x). The deadlock was introduced with
commmit
67347fe4e632 ("epoll: do not take global 'epmutex' for simple
topologies").
The acquistion of the ep->mtx for the destination 'ep' was added such
that a concurrent EPOLL_CTL_ADD operation would see the correct state of
the ep (Specifically, the check for '!list_empty(&f.file->f_ep_links')
However, by simply not acquiring the lock, we do not serialize behind
the ep->mtx from the add path, and thus may perform a full path check
when if we had waited a little longer it may not have been necessary.
However, this is a transient state, and performing the full loop
checking in this case is not harmful.
The important point is that we wouldn't miss doing the full loop
checking when required, since EPOLL_CTL_ADD always locks any 'ep's that
its operating upon. The reason we don't need to do lock ordering in the
add path, is that we are already are holding the global 'epmutex'
whenever we do the double lock. Further, the original posting of this
patch, which was tested for the intended performance gains, did not
perform this additional locking.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Nathan Zimmer <nzimmer@sgi.com>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Nelson Elhage <nelhage@nelhage.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nobuhiro Iwamatsu [Thu, 2 Jan 2014 20:58:53 +0000 (12:58 -0800)]
sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c
Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined
CONFIG_FLATMEM. When the functions that use the pfn_valid is used in
driver module, max_low_pfn and min_low_pfn is to undefined, and fail to
build.
ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
make[2]: *** [__modpost] Error 1
make[1]: *** [modules] Error 2
This patch fix this problem.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiang Liu [Thu, 2 Jan 2014 20:58:52 +0000 (12:58 -0800)]
drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test()
Check DMA mapping return values in function ioat_dma_self_test() to get
rid of following warning message.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0()
ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single]
Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio
CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8
Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.
1311181644 11/18/2013
Call Trace:
dump_stack+0x4d/0x66
warn_slowpath_common+0x7d/0xa0
warn_slowpath_fmt+0x4c/0x50
check_unmap+0x4c0/0x9a0
debug_dma_unmap_page+0x81/0x90
ioat_dma_self_test+0x3d2/0x680 [ioatdma]
ioat3_dma_self_test+0x12/0x30 [ioatdma]
ioat_probe+0xf4/0x110 [ioatdma]
ioat3_dma_probe+0x268/0x410 [ioatdma]
ioat_pci_probe+0x122/0x1b0 [ioatdma]
local_pci_probe+0x45/0xa0
pci_device_probe+0xd9/0x130
driver_probe_device+0x171/0x490
__driver_attach+0x93/0xa0
bus_for_each_dev+0x6b/0xb0
driver_attach+0x1e/0x20
bus_add_driver+0x1f8/0x2b0
driver_register+0x81/0x110
__pci_register_driver+0x60/0x70
ioat_init_module+0x89/0x1000 [ioatdma]
do_one_initcall+0xe2/0x250
load_module+0x2313/0x2a00
SyS_init_module+0xd9/0x130
system_call_fastpath+0x1a/0x1f
---[ end trace
990c591681d27c31 ]---
Mapped at:
debug_dma_map_page+0xbe/0x180
ioat_dma_self_test+0x1ab/0x680 [ioatdma]
ioat3_dma_self_test+0x12/0x30 [ioatdma]
ioat_probe+0xf4/0x110 [ioatdma]
ioat3_dma_probe+0x268/0x410 [ioatdma]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Thu, 2 Jan 2014 20:58:51 +0000 (12:58 -0800)]
mm/memory-failure.c: transfer page count from head page to tail page after split thp
Memory failures on thp tail pages cause kernel panic like below:
mce: [Hardware Error]: Machine check events logged
MCE exception done on CPU 7
BUG: unable to handle kernel NULL pointer dereference at
0000000000000058
IP: [<
ffffffff811b7cd1>] dequeue_hwpoisoned_huge_page+0x131/0x1e0
PGD
bae42067 PUD
ba47d067 PMD 0
Oops: 0000 [#1] SMP
...
CPU: 7 PID: 128 Comm: kworker/7:2 Tainted: G M O
3.13.0-rc4-131217-1558-00003-g83b7df08e462 #25
...
Call Trace:
me_huge_page+0x3e/0x50
memory_failure+0x4bb/0xc20
mce_process_work+0x3e/0x70
process_one_work+0x171/0x420
worker_thread+0x11b/0x3a0
? manage_workers.isra.25+0x2b0/0x2b0
kthread+0xe4/0x100
? kthread_create_on_node+0x190/0x190
ret_from_fork+0x7c/0xb0
? kthread_create_on_node+0x190/0x190
...
RIP dequeue_hwpoisoned_huge_page+0x131/0x1e0
CR2:
0000000000000058
The reasoning of this problem is shown below:
- when we have a memory error on a thp tail page, the memory error
handler grabs a refcount of the head page to keep the thp under us.
- Before unmapping the error page from processes, we split the thp,
where page refcounts of both of head/tail pages don't change.
- Then we call try_to_unmap() over the error page (which was a tail
page before). We didn't pin the error page to handle the memory error,
this error page is freed and removed from LRU list.
- We never have the error page on LRU list, so the first page state
check returns "unknown page," then we move to the second check
with the saved page flag.
- The saved page flag have PG_tail set, so the second page state check
returns "hugepage."
- We call me_huge_page() for freed error page, then we hit the above panic.
The root cause is that we didn't move refcount from the head page to the
tail page after split thp. So this patch suggests to do this.
This panic was introduced by commit
524fca1e73 ("HWPOISON: fix
misjudgement of page_action() for errors on mlocked pages"). Note that we
did have the same refcount problem before this commit, but it was just
ignored because we had only first page state check which returned "unknown
page." The commit changed the refcount problem from "doesn't work" to
"kernel panic."
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org> [3.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Simek [Thu, 2 Jan 2014 20:58:50 +0000 (12:58 -0800)]
MAINTAINERS: set up proper record for Xilinx Zynq
Setup correct zynq entry.
- Add missing cadence_ttc_timer maintainership
- Add zynq wildcard
- Add xilinx wildcard
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 2 Jan 2014 20:58:49 +0000 (12:58 -0800)]
mm: remove bogus warning in copy_huge_pmd()
Sasha Levin reported the following warning being triggered
WARNING: CPU: 28 PID: 35287 at mm/huge_memory.c:887 copy_huge_pmd+0x145/ 0x3a0()
Call Trace:
copy_huge_pmd+0x145/0x3a0
copy_page_range+0x3f2/0x560
dup_mmap+0x2c9/0x3d0
dup_mm+0xad/0x150
copy_process+0xa68/0x12e0
do_fork+0x96/0x270
SyS_clone+0x16/0x20
stub_clone+0x69/0x90
This warning was introduced by "mm: numa: Avoid unnecessary disruption
of NUMA hinting during migration" for paranoia reasons but the warning
is bogus. I was thinking of parallel races between NUMA hinting faults
and forks but this warning would also be triggered by a parallel reclaim
splitting a THP during a fork. Remote the bogus warning.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Thu, 2 Jan 2014 20:58:47 +0000 (12:58 -0800)]
memcg: fix memcg_size() calculation
The mem_cgroup structure contains nr_node_ids pointers to
mem_cgroup_per_node objects, not the objects themselves.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rik van Riel [Thu, 2 Jan 2014 20:58:46 +0000 (12:58 -0800)]
mm: fix use-after-free in sys_remap_file_pages
remap_file_pages calls mmap_region, which may merge the VMA with other
existing VMAs, and free "vma". This can lead to a use-after-free bug.
Avoid the bug by remembering vm_flags before calling mmap_region, and
not trying to dereference vma later.
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Thu, 2 Jan 2014 20:58:44 +0000 (12:58 -0800)]
mm: munlock: fix deadlock in __munlock_pagevec()
Commit
7225522bb429 ("mm: munlock: batch non-THP page isolation and
munlock+putback using pagevec" introduced __munlock_pagevec() to speed
up munlock by holding lru_lock over multiple isolated pages. Pages that
fail to be isolated are put_page()d immediately, also within the lock.
This can lead to deadlock when __munlock_pagevec() becomes the holder of
the last page pin and put_page() leads to __page_cache_release() which
also locks lru_lock. The deadlock has been observed by Sasha Levin
using trinity.
This patch avoids the deadlock by deferring put_page() operations until
lru_lock is released. Another pagevec (which is also used by later
phases of the function is reused to gather the pages for put_page()
operation.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Thu, 2 Jan 2014 20:58:43 +0000 (12:58 -0800)]
mm: munlock: fix a bug where THP tail page is encountered
Since commit
ff6a6da60b89 ("mm: accelerate munlock() treatment of THP
pages") munlock skips tail pages of a munlocked THP page. However, when
the head page already has PageMlocked unset, it will not skip the tail
pages.
Commit
7225522bb429 ("mm: munlock: batch non-THP page isolation and
munlock+putback using pagevec") has added a PageTransHuge() check which
contains VM_BUG_ON(PageTail(page)). Sasha Levin found this triggered
using trinity, on the first tail page of a THP page without PageMlocked
flag.
This patch fixes the issue by skipping tail pages also in the case when
PageMlocked flag is unset. There is still a possibility of race with
THP page split between clearing PageMlocked and determining how many
pages to skip. The race might result in former tail pages not being
skipped, which is however no longer a bug, as during the skip the
PageTail flags are cleared.
However this race also affects correctness of NR_MLOCK accounting, which
is to be fixed in a separate patch.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 2 Jan 2014 20:45:47 +0000 (12:45 -0800)]
Merge tag 'gfs2-fixes' of git://git./linux/kernel/git/steve/gfs2-3.0-fixes
Pull GFS2 fixes from Steven Whitehouse:
"Here is a set of small fixes for GFS2. There is a fix to drop
s_umount which is copied in from the core vfs, two patches relate to a
hard to hit "use after free" and memory leak. Two patches related to
using DIO and buffered I/O on the same file to ensure correct
operation in relation to glock state changes. The final patch adds an
RCU read lock to ensure correct locking on an error path"
* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
GFS2: Fix unsafe dereference in dump_holder()
GFS2: Wait for async DIO in glock state changes
GFS2: Fix incorrect invalidation for DIO/buffered I/O
GFS2: Fix slab memory leak in gfs2_bufdata
GFS2: Fix use-after-free race when calling gfs2_remove_from_ail
GFS2: don't hold s_umount over blkdev_put
Linus Torvalds [Thu, 2 Jan 2014 20:45:07 +0000 (12:45 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Two small bug fixes and a follow-up to the CONFIG_NR_CPUS change.
A kernel compiled with CONFIG_NR_CPUS=256 will waste quite a bit of
memory for the per-cpu arrays. Under z/VM the maximum number of CPUs
is 64, the code now limits the possible cpu mask to 64 if running
under z/VM"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: obtain function handle in hotplug notifier
s390/3270: fix allocation of tty3270_screen structure
s390/smp: improve setup of possible cpu mask
Jan Kiszka [Sat, 28 Dec 2013 15:31:52 +0000 (16:31 +0100)]
KVM: nVMX: Unconditionally uninit the MMU on nested vmexit
Three reasons for doing this: 1. arch.walk_mmu points to arch.mmu anyway
in case nested EPT wasn't in use. 2. this aligns VMX with SVM. But 3. is
most important: nested_cpu_has_ept(vmcs12) queries the VMCS page, and if
one guest VCPU manipulates the page of another VCPU in L2, we may be
fooled to skip over the nested_ept_uninit_mmu_context, leaving mmu in
nested state. That can crash the host later on if nested_ept_get_cr3 is
invoked while L1 already left vmxon and nested.current_vmcs12 became
NULL therefore.
Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Tetsuo Handa [Thu, 2 Jan 2014 10:52:20 +0000 (19:52 +0900)]
GFS2: Fix unsafe dereference in dump_holder()
GLOCK_BUG_ON() might call this function without RCU read lock. Make sure that
RCU read lock is held when using task_struct returned from pid_task().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Linus Torvalds [Wed, 1 Jan 2014 19:36:16 +0000 (11:36 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull radeon drm fixes from Dave Airlie:
"Just piping a bunch of fixes from pre-xmas from Alex for radeon, all
either fix bad hw setup issues or regressions"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Bump version for CIK DCE tiling fix
drm/radeon: set correct number of banks for CIK chips in DCE
drm/radeon: set correct pipe config for Hawaii in DCE
drm/radeon: expose render backend mask to the userspace
drm/radeon: fix render backend setup for SI and CIK
drm/radeon: 0x9649 is SUMO2 not SUMO
drm/radeon: fix UVD 256MB check
Linus Torvalds [Wed, 1 Jan 2014 19:35:27 +0000 (11:35 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a build error on ARM that was introduced in 3.13-rc1"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ixp4xx - Fix kernel compile error
Dave Airlie [Wed, 1 Jan 2014 10:32:19 +0000 (20:32 +1000)]
Merge branch 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Radeon fixes, Christmas eve edition. Fix incorrect family for 0x9649
which lead to bogus rendering, tiling and RB fixes for SI and CIK,
and a UVD fix.
* 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Bump version for CIK DCE tiling fix
drm/radeon: set correct number of banks for CIK chips in DCE
drm/radeon: set correct pipe config for Hawaii in DCE
drm/radeon: expose render backend mask to the userspace
drm/radeon: fix render backend setup for SI and CIK
drm/radeon: 0x9649 is SUMO2 not SUMO
drm/radeon: fix UVD 256MB check
Krzysztof Hałasa [Tue, 31 Dec 2013 10:51:16 +0000 (11:51 +0100)]
crypto: ixp4xx - Fix kernel compile error
drivers/crypto/ixp4xx_crypto.c: In function 'ixp_module_init':
drivers/crypto/ixp4xx_crypto.c:1419:2: error: 'dev' undeclared (first use in this function)
Now builds. Not tested on real hw.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rafael J. Wysocki [Tue, 31 Dec 2013 21:09:28 +0000 (22:09 +0100)]
Merge branches 'pm-cpufreq' and 'pm-cpuidle'
* pm-cpufreq:
intel_pstate: Fail initialization if P-state information is missing
cpufreq: preserve user_policy across suspend/resume
cpufreq: Clean up after a failing light-weight initialization
* pm-cpuidle:
ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function
Rafael J. Wysocki [Tue, 31 Dec 2013 21:08:08 +0000 (22:08 +0100)]
Merge branch 'cpuidle/3.13-fixes' of git://git.linaro.org/people/daniel.lezcano/linux into pm-cpuidle
Pull ARM cpuidle fixes for v3.13 from Daniel Lezcano.
* 'cpuidle/3.13-fixes' of git://git.linaro.org/people/daniel.lezcano/linux:
ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function
Rafael J. Wysocki [Tue, 31 Dec 2013 21:03:37 +0000 (22:03 +0100)]
Merge branches 'acpi-pci-pm' and 'acpi-pci-hotplug'
* acpi-pci-pm:
PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI
* acpi-pci-hotplug:
ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug
ACPI / PCI / hotplug: Avoid warning when _ADR not present
Linus Torvalds [Tue, 31 Dec 2013 20:19:30 +0000 (12:19 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"A fix for a panic in gpio-keys driver when set up with absolute
events, a fixup to the new zforce driver and a new keycode definition"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: allocate absinfo data when setting ABS capability
Input: define KEY_WWAN for Wireless WAN
Input: zforce - fix possible driver hang during suspend
Linus Torvalds [Tue, 31 Dec 2013 20:17:14 +0000 (12:17 -0800)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A few small cifs fixes including two for stable, and fixing a
regression introduced by the VFS change to file create"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
cifs: set FILE_CREATED
cifs: We do not drop reference to tlink in CIFSCheckMFSymlink()
Add missing end of line termination to some cifs messages
Mike Turquette [Tue, 31 Dec 2013 19:35:12 +0000 (11:35 -0800)]
Merge branch 'clk-next-unregister' into clk-next
Conflicts:
drivers/clk/clk.c
Dmitry Torokhov [Fri, 27 Dec 2013 01:44:29 +0000 (17:44 -0800)]
Input: allocate absinfo data when setting ABS capability
We need to make sure we allocate absinfo data when we are setting one of
EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this
event.
Rested-by: Paul Cercueil <pcercuei@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Rafael J. Wysocki [Tue, 31 Dec 2013 12:39:42 +0000 (13:39 +0100)]
ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug
The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made
during the 3.12 development cycle uncovered a problem with VGA
switcheroo that on some systems, when the device-specific method
(ATPX in the radeon case, _DSM in the nouveau case) is used to turn
off the discrete graphics, the BIOS generates ACPI hotplug events for
that device and those events cause ACPIPHP to attempt to remove the
device from the system (they are events for a device that was present
previously and is not present any more, so that's what should be done
according to the spec). Then, the system stops functioning correctly.
Since the hotplug events in question were simply silently ignored
previously, the least intrusive way to address that problem is to
make ACPIPHP ignore them again. For this purpose, introduce a new
ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug
events for PCI devices whose ACPI companions have that flag set.
Next, make the radeon and nouveau switcheroo detection code set the
no_hotplug flag for the discrete graphics' ACPI companion.
Fixes: bbd34fcdd1b2 (ACPI / hotplug / PCI: Register all devices under the given bridge)
References: https://bugzilla.kernel.org/show_bug.cgi?id=61891
References: https://bugzilla.kernel.org/show_bug.cgi?id=64891
Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk>
Reported-and-tested-by: <madcatx@atlas.cz>
Reported-and-tested-by: Joaquín Aramendía <samsagax@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Rafael J. Wysocki [Tue, 31 Dec 2013 12:37:46 +0000 (13:37 +0100)]
intel_pstate: Fail initialization if P-state information is missing
If pstate.current_pstate is 0 after the initial
intel_pstate_get_cpu_pstates(), this means that we were unable to
obtain any useful P-state information and there is no reason to
continue, so free memory and return an error in that case.
This fixes the following divide error occuring in a nested KVM
guest:
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
cpufreq: __cpufreq_add_dev: ->get() failed
divide error: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-0.rc4.git5.1.fc21.x86_64 #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task:
ffff88001ea20000 ti:
ffff88001e9bc000 task.ti:
ffff88001e9bc000
RIP: 0010:[<
ffffffff815c551d>] [<
ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0
RSP: 0000:
ffff88001ee03e18 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
ffff88001a454348 RCX:
0000000000006100
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
ffff88001ee03e38 R08:
0000000000000000 R09:
0000000000000000
R10:
ffff88001ea20000 R11:
0000000000000000 R12:
00000c0a1ea20000
R13:
1ea200001ea20000 R14:
ffffffff815c5400 R15:
ffff88001a454348
FS:
0000000000000000(0000) GS:
ffff88001ee00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
0000000000000000 CR3:
0000000001c0c000 CR4:
00000000000006f0
Stack:
fffffffb1a454390 ffffffff821a4500 ffff88001a454390 0000000000000100
ffff88001ee03ea8 ffffffff81083e9a ffffffff81083e15 ffffffff82d5ed40
ffffffff8258cc60 0000000000000000 ffffffff81ac39de 0000000000000000
Call Trace:
<IRQ>
[<
ffffffff81083e9a>] call_timer_fn+0x8a/0x310
[<
ffffffff81083e15>] ? call_timer_fn+0x5/0x310
[<
ffffffff815c5400>] ? pid_param_set+0x130/0x130
[<
ffffffff81084354>] run_timer_softirq+0x234/0x380
[<
ffffffff8107aee4>] __do_softirq+0x104/0x430
[<
ffffffff8107b5fd>] irq_exit+0xcd/0xe0
[<
ffffffff81770645>] smp_apic_timer_interrupt+0x45/0x60
[<
ffffffff8176efb2>] apic_timer_interrupt+0x72/0x80
<EOI>
[<
ffffffff810e15cd>] ? vprintk_emit+0x1dd/0x5e0
[<
ffffffff81757719>] printk+0x67/0x69
[<
ffffffff815c1493>] __cpufreq_add_dev.isra.13+0x883/0x8d0
[<
ffffffff815c14f0>] cpufreq_add_dev+0x10/0x20
[<
ffffffff814a14d1>] subsys_interface_register+0xb1/0xf0
[<
ffffffff815bf5cf>] cpufreq_register_driver+0x9f/0x210
[<
ffffffff81fb19af>] intel_pstate_init+0x27d/0x3be
[<
ffffffff81761e3e>] ? mutex_unlock+0xe/0x10
[<
ffffffff81fb1732>] ? cpufreq_gov_dbs_init+0x12/0x12
[<
ffffffff8100214a>] do_one_initcall+0xfa/0x1b0
[<
ffffffff8109dbf5>] ? parse_args+0x225/0x3f0
[<
ffffffff81f64193>] kernel_init_freeable+0x1fc/0x287
[<
ffffffff81f638d0>] ? do_early_param+0x88/0x88
[<
ffffffff8174b530>] ? rest_init+0x150/0x150
[<
ffffffff8174b53e>] kernel_init+0xe/0x130
[<
ffffffff8176e27c>] ret_from_fork+0x7c/0xb0
[<
ffffffff8174b530>] ? rest_init+0x150/0x150
Code: c1 e0 05 48 63 bc 03 10 01 00 00 48 63 83 d0 00 00 00 48 63 d6 48 c1 e2 08 c1 e1 08 4c 63 c2 48 c1 e0 08 48 98 48 c1 e0 08 48 99 <49> f7 f8 48 98 48 0f af f8 48 c1 ff 08 29 f9 89 ca c1 fa 1f 89
RIP [<
ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0
RSP <
ffff88001ee03e18>
---[ end trace
f166110ed22cc37a ]---
Kernel panic - not syncing: Fatal exception in interrupt
Reported-and-tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Linus Torvalds [Mon, 30 Dec 2013 22:31:11 +0000 (14:31 -0800)]
Merge tag 'dt-fixes-for-3.13' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix 2 regressions found on PPC
- Allow NULL ptr in unflatten_and_copy_device_tree
- Update my email address
* tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: Update Rob Herring's email address
of/irq: Fix device_node refcount in of_irq_parse_raw()
of/Kconfig: Spelling s/one/once/
Revert "of/address: Handle #address-cells > 2 specially"
of: Fix NULL dereference in unflatten_and_copy()
Jan Kiszka [Sun, 29 Dec 2013 01:29:30 +0000 (02:29 +0100)]
KVM: x86: Fix APIC map calculation after re-enabling
Update arch.apic_base before triggering recalculate_apic_map. Otherwise
the recalculation will work against the previous state of the APIC and
will fail to build the correct map when an APIC is hardware-enabled
again.
This fixes a regression of
1e08ec4a13.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Mike Turquette [Mon, 30 Dec 2013 18:58:22 +0000 (10:58 -0800)]
Merge branch 'for_3.14/keystone-clk' of git://git./linux/kernel/git/ssantosh/linux-keystone into clk-next-keystone
Linus Torvalds [Mon, 30 Dec 2013 18:22:57 +0000 (10:22 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
"A bit more endian problems found during testing of 3.13 and a few
other simple fixes and regressions fixes"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix alignment of secondary cpu spin vars
powerpc: Align p_end
powernv/eeh: Add buffer for P7IOC hub error data
powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag()
powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian
powerpc: Make unaligned accesses endian-safe for powerpc
powerpc: Fix bad stack check in exception entry
powerpc/512x: dts: disable MPC5125 usb module
powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)
Rob Herring [Mon, 30 Dec 2013 18:09:47 +0000 (12:09 -0600)]
Merge remote-tracking branch 'grant/devicetree/merge' into dt-fixes
Sachin Kamat [Thu, 19 Dec 2013 08:33:39 +0000 (14:03 +0530)]
clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apll
Add CLK_SET_RATE_PARENT flag to mout_apll clock. This will let us set the
clock rate in the cpufreq driver.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Linus Torvalds [Mon, 30 Dec 2013 17:33:30 +0000 (09:33 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Some holiday bug fixes for 3.13... There is still one bug I'd like to
get fixed before 3.13-final.
The vlan code erroneously assignes the header ops of the underlying
real device to the VLAN device above it when the real device can
hardware offload VLAN handling. That's completely bogus because
header ops are tied to the device type, so they only expect to see a
'dev' argument compatible with their ops.
The fix is the have the VLAN code use a special set of header ops that
does the pass-thru correctly, by calling the underlying real device's
header ops but _also_ passing in the real device instead of the VLAN
device.
That fix is currently waiting some testing.
Anyways, of note here:
1) Fix bitmap edge case in radiotap, from Johannes Berg.
2) Fix oops on driver unload in rtlwifi, from Larry Finger.
3) Bonding doesn't do locking correctly during speed/duplex/link
changes, from Ding Tianhong.
4) Fix header parsing in GRE code, this bug has been around for a few
releases. From Timo Teräs.
5) SIT tunnel driver MTU check needs to take GSO into account, from
Eric Dumazet.
6) Minor info leak in inet_diag, from Daniel Borkmann.
7) Info leak in YAM hamradio driver, from Salva Peiró.
8) Fix route expiration state handling in ipv6 routing code, from Li
RongQing.
9) DCCP probe module does not check request_module()'s return value,
from Wang Weidong.
10) cpsw driver passes NULL device names to request_irq(), from
Mugunthan V N.
11) Prevent a NULL splat in RDS binding code, from Sasha Levin.
12) Fix 4G overflow test in tg3 driver, from Nithin Sujir.
13) Cure use after free in arc_emac and fec driver's software
timestamp handling, from Eric Dumazet.
14) SIT driver can fail to release the route when
iptunnel_handle_offloads() throws an error. From Li RongQing.
15) Several batman-adv fixes from Simon Wunderlich and Antonio
Quartulli.
16) Fix deadlock during TIPC socket release, from Ying Xue.
17) Fix regression in ROSE protocol recvmsg() msg_name handling, from
Florian Westphal.
18) stmmac PTP support releases wrong spinlock, from Vince Bridgers"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
stmmac: Fix incorrect spinlock release and PTP cap detection.
phy: IRQ cannot be shared
net: rose: restore old recvmsg behavior
xen-netback: fix guest-receive-side array sizes
fec: Do not assume that PHY reset is active low
tipc: fix deadlock during socket release
netfilter: nf_tables: fix wrong datatype in nft_validate_data_load()
batman-adv: fix vlan header access
batman-adv: clean nf state when removing protocol header
batman-adv: fix alignment for batadv_tvlv_tt_change
batman-adv: fix size of batadv_bla_claim_dst
batman-adv: fix size of batadv_icmp_header
batman-adv: fix header alignment by unrolling batadv_header
batman-adv: fix alignment for batadv_coded_packet
netfilter: nf_tables: fix oops when updating table with user chains
netfilter: nf_tables: fix dumping with large number of sets
ipv6: release dst properly in ipip6_tunnel_xmit
netxen: Correct off-by-one errors in bounds checks
net: Add some clarification to skb_tx_timestamp() comment.
arc_emac: fix potential use after free
...
Tomasz Figa [Tue, 15 Oct 2013 17:41:21 +0000 (19:41 +0200)]
clk: samsung: exynos5250: Fix parents of gate clocks from MFC domain
This patch adds mout_aclk333_sub mux clock and updates gate clocks from
MFC domain to have it as their parent as specified in SoC documentation.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Tomasz Figa [Tue, 15 Oct 2013 17:41:20 +0000 (19:41 +0200)]
clk: samsung: exynos5250: Correct parent list of audio muxes
According to SoC documentation, input 5 of mout_audio muxes is connected
to xxti (named fin_pll in the driver). This patch corrects defined
parent arrays to match SoC documentation.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Tomasz Figa [Tue, 15 Oct 2013 17:41:19 +0000 (19:41 +0200)]
clk: samsung: exynos5250: Add missing unpopulated mux parents
This patch updates mux parent arrays with unpopulated mux inputs, as all
inputs need to be specified in parent arrays passed to
clk_register_mux(), otherwise clk_set_parent() can generate out of bound
accesses to the array.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Tomasz Figa [Tue, 15 Oct 2013 17:41:18 +0000 (19:41 +0200)]
clk: samsung: exynos5250: Fix parent of gate clocks from DISP1 domain
This patch adds mux_aclk_200_disp1_sub mux clock, which according to SoC
documentation is the correct parent of DISP1 gate clocks.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Tomasz Figa [Tue, 15 Oct 2013 17:41:17 +0000 (19:41 +0200)]
clk: samsung: exynos5250: Fix parents of gate clocks from GSCL domain
This patch adds mout_aclk266_gscl_sub mux clock and adjusts definitions
of GSCL domain gate clocks to use it as their parent, as specified in
SoC documentation.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Tomasz Figa [Tue, 15 Oct 2013 17:41:16 +0000 (19:41 +0200)]
clk: samsung: exynos5250: Make names of mux and div clocks consistent
This patch renames all mux clocks to start with mout_ prefix and all div
clocks to start with div_ prefix for consistency with other clocks
already defined this way.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Tomasz Figa [Tue, 15 Oct 2013 17:41:15 +0000 (19:41 +0200)]
clk: samsung: exynos5250: Sort definitions by registers and bitfield
This patch reorders clock definitions, so they are sorted by register
addresses and bitfield shifts. When at it, blank lines are added to
separate definitions of clocks from different registers.
Overall this should make the driver more readable and reduce the number
of potential conflicts when adding new entries.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Tomasz Figa [Mon, 30 Dec 2013 17:15:23 +0000 (18:15 +0100)]
Merge branch 'samsung-fixes' into samsung-next-base
Krzysztof Kozlowski [Tue, 17 Dec 2013 09:56:39 +0000 (10:56 +0100)]
clk: exynos: File scope reg_save array should depend on PM_SLEEP
Move reg_save[] into CONFIG_PM_SLEEP dependency block as it is used only
by suspend and resume functions.
This fixes the warning on CONFIG_PM_SLEEP=n:
drivers/clk/samsung/clk-exynos-audss.c:29:22: warning: ‘reg_save’ defined but not used [-Wunused-variable]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Abhilash Kesavan [Wed, 11 Dec 2013 11:57:05 +0000 (17:27 +0530)]
clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock
The sysreg (system register) generates control signals for various blocks
like disp1blk, i2c, mipi, usb etc. However, it gets disabled as an unused
clock at boot-up. This can lead to failures in operation of above blocks,
because they can not be configured properly if this clock is disabled.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
[t.figa: Updated patch description.]
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Rob Herring [Tue, 3 Dec 2013 16:20:16 +0000 (10:20 -0600)]
MAINTAINERS: Update Rob Herring's email address
My Calxeda email address is going away.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Abhilash Kesavan [Thu, 12 Dec 2013 03:02:02 +0000 (08:32 +0530)]
ARM: dts: exynos5250: Fix MDMA0 clock number
Due to incorrect clock specified in MDMA0 node, using MDMA0 controller
could cause system failures, due to wrong clock being controlled. This
patch fixes this by specifying correct clock.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
[t.figa: Corrected commit message and description.]
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Abhilash Kesavan [Thu, 12 Dec 2013 03:02:01 +0000 (08:32 +0530)]
clk: samsung: exynos5250: Add MDMA0 clocks
Adds gate clock for MDMA0 on Exynos5250 SoC. This is needed to ensure
that the clock is enabled when MDMA0 is used on systems on which
firmware gates the clockby default.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
[t.figa: Updated patch description.]
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Abhilash Kesavan [Thu, 12 Dec 2013 03:02:00 +0000 (08:32 +0530)]
clk: samsung: exynos5250: Fix ACP gate register offset
The CLK_GATE_IP_ACP register offset is incorrectly listed making
definition of g2d clock incorrect, which may lead to system failures
when trying to use G2D on systems on which firmware gates this clock
by default. Fix this and the register ordering as well.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
[t.figa: Updated patch description.]
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Andrew Bresticker [Fri, 8 Nov 2013 10:14:07 +0000 (15:44 +0530)]
clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks
The gate clocks for the MFC sysmmus appear to be flipped, i.e.
GATE_IP_MFC[2] gates sysmmu_mfcl and GATE_IP_MFC[1] gates sysmmu_mfcr.
Fix this so that the MFC will start up.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Seung-Woo Kim [Fri, 22 Nov 2013 05:21:08 +0000 (14:21 +0900)]
clk: samsung: exynos4: Correct SRC_MFC register
The SRC_MFC register offset was incorrect, which could cause have caused
wrong calculation of rate of sclk_mfc clock, that could in turn lead to
incorrect operation of MFC. This patch corrects it.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
[t.figa: Updated patch description]
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
This page took 0.050511 seconds and 5 git commands to generate.