Barry Song [Fri, 25 Dec 2009 06:10:07 +0000 (14:10 +0800)]
ASoC: ad1938: fix typo, rename mask to rx_mask for ad1938_set_tdm_slot
Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Barry Song [Fri, 25 Dec 2009 06:10:06 +0000 (14:10 +0800)]
ASoC: ad1836: reset and restore clock control mode in suspend/resume entry
Tests show frequent suspend/resume(frequent poweroff/on ad1836 internal
components) maybe make ad1836 clock mode wrong sometimes after wakeup.
This patch reset/restore ad1836 clock mode while executing PM, then
ad1836 can always resume to right clock status.
Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Fri, 18 Dec 2009 14:20:35 +0000 (14:20 +0000)]
ASoC: Host clock2 read up in WM8904 FLL configuration
Avoids skipping over the read for disable cases.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Fri, 18 Dec 2009 13:31:40 +0000 (13:31 +0000)]
Merge branch 'for-2.6.33' into for-2.6.34
Mark Brown [Fri, 18 Dec 2009 13:11:12 +0000 (13:11 +0000)]
ASoC: Set AIF word length for WM8904
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Fri, 18 Dec 2009 12:00:22 +0000 (12:00 +0000)]
ASoC: Add initial WM8955 CODEC driver
The WM8955 is a low power, high quality stereo DAC with integrated
headphone and loudspeaker amplifiers, designed to reduce external
component requirements in portable digital audio applications. This is
an initial driver implementing support for the majority of the
functionality in the device, currently OUT3 is not supported.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Guennadi Liakhovetski [Thu, 17 Dec 2009 13:51:35 +0000 (14:51 +0100)]
ASoC: wm8974: fix a wrong bit definition
The wm8974 datasheet defines BUFIOEN as bit 2.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Mark Brown [Wed, 16 Dec 2009 20:36:37 +0000 (20:36 +0000)]
ASoC: Fix build of DA7210
DAC_VOICE_EN was not defined - looks to have been overly enthusiastically
deleted from a previous revision of the patch, pull the value from v1.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Meerwald [Mon, 14 Dec 2009 13:44:56 +0000 (14:44 +0100)]
ASoC: PLL computation in TLV320AIC3x SoC driver
fix precision of PLL computation for TLV320AIC3x SoC driver,
test results are at http://pmeerw.net/clk
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Vladimir Barinov <vova.barinov@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 15 Dec 2009 20:58:56 +0000 (20:58 +0000)]
ASoC: Fix sorting of codecs Makefile entries
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Kuninori Morimoto [Mon, 14 Dec 2009 04:22:00 +0000 (13:22 +0900)]
ASoC: Add FSI-DA7210 sound support for SuperH
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Mon, 14 Dec 2009 04:21:56 +0000 (13:21 +0900)]
ASoC: Add DA7210 codec device support for ALSA
This original driver was created by Dialog Semiconductor,
and cleanuped by Kuninori Morimoto.
Special thanks to David Chen.
This became very simple ASoC codec driver,
and it is tested by EcoVec24 board.
Signed-off-by: David Chen <Dajun.chen@diasemi.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Ilkka Koskinen [Wed, 9 Dec 2009 10:05:50 +0000 (12:05 +0200)]
ASoC: tpa6130a2: Add support for regulator framework
Take the regulator framework in use for managing the power sources
Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Wed, 9 Dec 2009 04:29:25 +0000 (13:29 +0900)]
ASoC: S3C64XX: Compress and generalize the CPU driver
The driver can be 'generalized' a bit by not hardcoding '2'(the number of
I2Sv3 controllers that the driver can handle) at many places, instead we
define a macro for it. That makes it easier to increase number of controllers
by changing the parameter at just one place, this will be useful when there is
support for newer SoCs, which have the same controller, only more in number.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Wed, 9 Dec 2009 04:29:20 +0000 (13:29 +0900)]
ASoC: S3C64XX: Remove unnecessary header includes
Removed redundant header includes which make no difference to compilation.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 8 Dec 2009 21:50:01 +0000 (21:50 +0000)]
ASoC: Register the CODEC in WM8727
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Mon, 7 Dec 2009 17:13:55 +0000 (17:13 +0000)]
ASoC: Sort DAPM sequences by CODEC as well
In preparation for multiple device support.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Mon, 7 Dec 2009 18:09:03 +0000 (18:09 +0000)]
ASoC: Push registers out of mixer power decision
No need for the mixers to know about this, and it allows for virtual
controls.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Jon Smirl [Wed, 16 Dec 2009 01:53:44 +0000 (20:53 -0500)]
ASoC: Fix disable of SPDIF on STAC9766 codec
Change code so that switching to playing music through the analog output
disables SPDIF out instead of disabling it when stream ends.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Tue, 15 Dec 2009 06:54:21 +0000 (15:54 +0900)]
ASoC: ak4642: Add default return value in ak4642_modinit
If ak4642 driver was compiled without I2C configs,
ak4642_modinit return value will become un-stable.
This patch modify this bug
Reported-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Julia Lawall [Sun, 13 Dec 2009 11:43:15 +0000 (12:43 +0100)]
ASoC: Correct code taking the size of a pointer
sizeof(codec->reg_cache) is just the size of the pointer. Elsewhere in the
file, codec->reg_cache is used with sizeof(wm8900_reg_defaults), so the
code is changed to do the same here.
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression *x;
expression f;
type T;
@@
*f(...,(T)x,...)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Olof Johansson [Thu, 10 Dec 2009 17:15:55 +0000 (11:15 -0600)]
ASoC: Fix build of OMAP sound drivers
There are build errors when building for some of the omap2/3 boards without
enabling sound:
sound/built-in.o:(.data+0x43bc): undefined reference to `soc_codec_dev_tlv320aic23'
sound/built-in.o:(.data+0x43cc): undefined reference to `tlv320aic23_dai'
Confused me quite a bit since the drivers that had references to the
codec weren't enabled. Turns out the Makefile was using the wrong
config option to enable them. Patch below.
Reported-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Roel Kluin [Tue, 8 Dec 2009 00:34:22 +0000 (01:34 +0100)]
ASoC: Wrong variable returned on error
The wrong variable was returned in the case of an error
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Daniel Mack [Mon, 30 Nov 2009 16:56:11 +0000 (17:56 +0100)]
ASoC: Add regulator support to CS4270 codec driver
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Timur Tabi <timur@freescale.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 26 Nov 2009 11:56:07 +0000 (11:56 +0000)]
ASoC: Initial WM8904 CODEC driver
The WM8904 is a high performance ultra-low power stereo CODEC
optimised for portable audio applications, with features including
a class W amplifier, FLL with free running mode, Mobile ReTune and
ground referenced headphone and line outputs.
Support for some features, most particularly the digital microphone
interface, is not yet present.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Fri, 4 Dec 2009 15:25:56 +0000 (15:25 +0000)]
ASoC: Display the power register in DAPM widget debugfs
Make it a bit easier to tie DAPM widgets in with the register map
without referring to the source by including the register location
controlled by the widget.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Fri, 4 Dec 2009 14:22:03 +0000 (14:22 +0000)]
ASoC: Export snd_soc_update_bits_unlocked()
Allows custom controls to use it.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Ilkka Koskinen [Fri, 4 Dec 2009 11:49:10 +0000 (13:49 +0200)]
ASoC: tlv320dac33: Add support for regulator framework
Take the regulator framework in use for managing the power sources.
Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Fri, 4 Dec 2009 10:50:02 +0000 (10:50 +0000)]
Merge branch 'for-2.6.33' into for-2.6.34
Chaithrika U S [Thu, 3 Dec 2009 13:26:56 +0000 (18:56 +0530)]
ASoC: DaVinci: Update suspend/resume support for McASP driver
Add clock enable and disable calls to resume and suspend respectively.
Also add a member to the audio device data structure which tracks the clock
status.
Tested on DA850/OMAP-L138 EVM. For the purpose of testing, the patches[1] which
add suspend-to-RAM support to DA850/OMAP-L138 SoC were applied.
[1] http://linux.davincidsp.com/pipermail/davinci-linux-open-source/
2009-November/016958.html
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Fri, 27 Nov 2009 16:43:53 +0000 (16:43 +0000)]
S3C64XX: Staticise platform data for PCM devices
The symbols aren't declared and don't need to be exported, they go
along with the device structure.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Joonyoung Shim [Fri, 4 Dec 2009 06:12:10 +0000 (15:12 +0900)]
ASoC: Rename controls with a / in wm_hubs
This renames from a character / to : of controls. A / occurs below error
messages.
ASoC: Failed to create IN2RP/VXRP debugfs file
ASoC: Failed to create IN2LP/VXRN debugfs file
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Wed, 2 Dec 2009 06:11:08 +0000 (15:11 +0900)]
ASoC: sh_fsi: avoid using global variable
Current FSI driver use global variable to access device data.
But this style will be broken
if SuperH come with multiple FSI blocks in future.
To solve this problem, this patch use cpu_dai->private_data.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Manuel Lauss [Tue, 1 Dec 2009 17:10:35 +0000 (18:10 +0100)]
ASoC: au1x: dbdma2: plug memleak in pcm device creation error path
free the allocated pcm platform device in the error path.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Manuel Lauss [Tue, 1 Dec 2009 17:10:34 +0000 (18:10 +0100)]
ASoC: au1x: dbdma2: fix oops on soc device removal.
platform_device_unregister() frees resources for us, no need to
do it explicitly. Fixes an oops when machine code removes the
soc-audio device.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Daniel Mack [Mon, 30 Nov 2009 13:06:37 +0000 (14:06 +0100)]
ASoC: pxa/raumfeld: adopt new snd_soc_dai_set_pll() API
ALSA's for-2.6.33 branch has a new source argument to
snd_soc_dai_set_pll().
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Mon, 30 Nov 2009 11:24:48 +0000 (20:24 +0900)]
ASoC: sh: fsi: Add runtime PM support
This patch add support runtime PM.
Driver callbacks for Runtime PM are empty because
the device registers are always re-initialized after
pm_runtime_get_sync(). The Runtime PM functions replaces the
clock framework module stop bit handling in this driver.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kuninori Morimoto [Mon, 9 Nov 2009 02:12:49 +0000 (11:12 +0900)]
sh: ms7724se: Add runtime PM support for FSI
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Fri, 27 Nov 2009 16:56:22 +0000 (16:56 +0000)]
Merge branch 'for-2.6.32' into for-2.6.33
Daniel Mack [Fri, 27 Nov 2009 12:47:10 +0000 (13:47 +0100)]
ALSA: ARM: add Raumfeld audio support
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Anuj Aggarwal [Fri, 27 Nov 2009 12:10:58 +0000 (17:40 +0530)]
ASoC: AIC23: Fixing infinite loop in resume path
This patch fixes two issues:
a) Infinite loop in resume function
b) Writes to non-existing registers in resume function
Cc: stable@kernel.org
Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Takashi Iwai [Fri, 27 Nov 2009 14:14:09 +0000 (15:14 +0100)]
ASoC: Revert missing reset_err in wm97*.c
The commit
fe3e78e073d25308756f38019956061153267769
ASoC: Factor out snd_soc_init_card()
removed the error paths that are still valid for wm97* codecs, causing
the compile errors like
sound/soc/codecs/wm9705.c:399: error: label 'reset_err' used but not defined
sound/soc/codecs/wm9712.c:687: error: label 'reset_err' used but not defined
sound/soc/codecs/wm9713.c:1237: error: label 'reset_err' used but not defined
Revert the removed error path codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Peter Ujfalusi [Thu, 26 Nov 2009 11:55:11 +0000 (13:55 +0200)]
ASoC: tlv320dac33: Change RT wq to singlethread wq
RT workqueue is going away in the near future, replace it with
singlethread wq for now, which is still supported.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 19 Nov 2009 11:36:10 +0000 (11:36 +0000)]
ASoC: Add BCLK calculation utility for TDM mode too
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 25 Nov 2009 14:25:36 +0000 (14:25 +0000)]
Merge branch 'twl4030-mfd' into for-2.6.33
Daniel J Blueman [Wed, 25 Nov 2009 12:12:59 +0000 (12:12 +0000)]
mfd: twl4030: fix ELF section mismatch...
Since twl4030_probe is only called from functions in the init ELF
section, annotate it so.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 23 Nov 2009 13:37:04 +0000 (13:37 +0000)]
Merge branch 'for-2.6.32' into for-2.6.33
Mark Brown [Mon, 23 Nov 2009 13:11:53 +0000 (13:11 +0000)]
ASoC: Fix suspend with active audio streams
When we get a stream suspend event force the power down since otherwise
the stream would remain marked as active. In future we'll probably want
to make this stream-specific and add an interface to make the power down
of other widgets optional in order to support leaving bypass paths
active while suspending the processor.
Cc: stable@kernel.org
Reported-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Fri, 20 Nov 2009 16:37:10 +0000 (16:37 +0000)]
Merge branch 'ads117x' of git://git./linux/kernel/git/broonie/sound-2.6 into for-2.6.33
Enric Balletbò i Serra [Wed, 18 Nov 2009 14:59:24 +0000 (15:59 +0100)]
ASoC: Add support for IGEP v2
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Troy Kisky [Thu, 19 Nov 2009 00:49:54 +0000 (17:49 -0700)]
ASoC: DaVinci: use edma_pause, edma_resume
Use edma_pause and edma_resume to make missing dma_events
less likely. This may not be needed, but it looks better.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Troy Kisky [Thu, 19 Nov 2009 00:49:53 +0000 (17:49 -0700)]
ASoC: DaVinci: pcm, fix underrun by using sram
Fix underruns by using dma to copy 1st to sram
in a ping/pong buffer style and then copying from
the sram to the ASP. This also has the advantage
of tolerating very long interrupt latency on dma
completion.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Troy Kisky [Thu, 19 Nov 2009 00:49:52 +0000 (17:49 -0700)]
ASoC: DaVinci: pcm, rename variables in prep for ping/pong
Rename variable master_lch to asp_channel
Rename variable slave_lch to asp_link[0]
Rename local variables:
lch to link
count to asp_count
src to asp_src
dst to asp_dst
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Troy Kisky [Thu, 19 Nov 2009 00:49:51 +0000 (17:49 -0700)]
ASoC: DaVinci: i2s, reduce underruns by combining into 1 element
Allow the left and right 16 bit samples to be shifted out as 1
32 bit sample.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 18 Nov 2009 13:54:51 +0000 (13:54 +0000)]
Merge branch 'for-2.6.32' into for-2.6.33
Troy Kisky [Tue, 17 Nov 2009 20:51:01 +0000 (13:51 -0700)]
ASoC: tlv320aic23 fix rate selection
Fix the ordering of sr_valid_mask array.
The lower bit of the index represents USB
not bosr.
Reported-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Grazvydas Ignotas [Sat, 7 Nov 2009 21:16:12 +0000 (23:16 +0200)]
ASoC: OMAP3 Pandora: update for TWL4030 codec changes
A while ago TWL4030 had it's playback stream name changed, but
pandora needs it for it's playback path. Update to correct stream
name so that playback works again.
Also mark VIBRA output as not connected.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Anuj Aggarwal [Tue, 17 Nov 2009 16:13:42 +0000 (21:43 +0530)]
ASoC: Modifying the license string GPLv2 for OMAP3 EVM
Correcting the license string from GPLv2 -> GPL v2.
Found the problem while building OMAP3 ASoC driver as
module.
Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 18 Nov 2009 13:42:05 +0000 (13:42 +0000)]
Merge branch 'topic/asoc' of git://git./linux/kernel/git/tiwai/sound-2.6 into for-2.6.33
Troy Kisky [Mon, 16 Nov 2009 23:52:31 +0000 (16:52 -0700)]
ASoC: DaVinci: remove requirement that dma_params is 1st in structure
Remove requirement that dma_params is 1st in the structures
davinci_audio_dev and davinci_mcbsp_dev.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Tue, 17 Nov 2009 07:54:03 +0000 (16:54 +0900)]
ASoC: Added the CPU driver for PCM controllers
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Tue, 17 Nov 2009 07:53:56 +0000 (16:53 +0900)]
ARM: S3C64XX: Defined PCM controller platform devices
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Tue, 17 Nov 2009 07:53:50 +0000 (16:53 +0900)]
ARM: S3C64XX: Added platform data header
Many SoCs have their I2S pins MUXed with other functions. So we need
to pass a callback for driver to configure the pins appropriately.
Hence, the need of platform data and this header.
As and when needed new callbacks and structure pointers maybe added to this
header.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Tue, 17 Nov 2009 07:53:38 +0000 (16:53 +0900)]
ARM: S3C64XX: Define PCM Controller base registers
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Tue, 17 Nov 2009 07:53:31 +0000 (16:53 +0900)]
ASoC: Rename 's3c24xx-pcm' driver to 's3c-dma'
Making room for namespace for the PCM Controller driver
the platform driver(s3c24xx-pcm) has been renamed to SoC
agnostic name 's3c-dma'.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Tue, 17 Nov 2009 07:53:23 +0000 (16:53 +0900)]
ASoC: Rename s3c24xx_pcm prefix to s3c_dma
The s3c24xx_pcm prefix for the soc_platform is inappropriate when
some Samsung SoCs have PCM controllers which will eventually have
drivers and hence namespace ambiguities.
To resolve naming ambiguities in future the following have been
renamed in order
1) s3c24xx_pcm_dma_params -> s3c_dma_params
2) s3c24xx_pcm_preallocate_dma_buffer -> s3c_preallocate_dma_buffer
3) s3c24xx_pcm_dmamask -> s3c_dma_mask
4) s3c24xx_pcm_XXX -> s3c_dma_XXX
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Marin Mitov [Mon, 16 Nov 2009 19:39:26 +0000 (21:39 +0200)]
ASoC: Use DMA_BIT_MASK(32) instead of deprecated DMA_32BIT_MASK
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mike Rapoport [Mon, 16 Nov 2009 14:19:25 +0000 (16:19 +0200)]
ASoC: OMAP: enable Overo driver for CM-T35
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 12 Nov 2009 23:15:08 +0000 (23:15 +0000)]
ASoC: Remove redundant snd_soc_dapm_new_widgets() calls
The DAPM widgets are now insntantiated by the core when creating the card
so there is no need for the individual CODEC drivers to do so.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Joonyoung Shim [Thu, 12 Nov 2009 08:14:04 +0000 (17:14 +0900)]
ASoC: Add jack_status_check callback function for GPIO jacks
The jack_status_check callback function is the interface to check the
status of the jack. Some target provides the method to distinguish what
is the jack inserted - headphone jack, microphone jack, tvout jack, etc,
so we can implement it using the jack_status_check function.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Barry Song [Thu, 12 Nov 2009 04:01:47 +0000 (12:01 +0800)]
ASoC: move setting ac97 platformdata earlier than ac97 read/write
While probing, AC97 codec drivers and soc-core generically execute the
following sequence:
snd_soc_new_ac97_codec -> snd_soc_new_pcms -> reset ac-link/read AC97 ID
to detect ->... -> set platform_data to ac97 by soc-core
commit
474828a40f6ddab6e2a3475a19c5c84aa3ec7d60 adds platform_data to
snd_ac97 instance. But ac97 platform data hasn't given to snd_ac97
before actual ac97 operations. Then while ac97_read access platform_data
of snd_ac97 for detecting, NULL pointer oops will fire. That means old
platform_data patch doesn't work in real-life cases.
This patch moves the operation of setting ac97 platform_data earlier
than ac97 reading/writing operations. Then it makes platform_data of
AC97 become practically useful.
Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Wed, 11 Nov 2009 05:02:18 +0000 (14:02 +0900)]
ASoC: Fixed arguments passed to SMDK64xx set_pll
Corrected the order of 'source' and 'pll_id' arguments.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 10 Nov 2009 16:08:04 +0000 (16:08 +0000)]
ASoC: Add bit clock rate calculator utility functions
Many devices need to calculate the bit clock rate desired to
work out the clock configuration required for the device.
Provide utility functions to do this using both hw_params
structures and raw numbers.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Grant Likely [Mon, 9 Nov 2009 16:40:09 +0000 (09:40 -0700)]
ASoC: mpc5200: remove duplicate identical IRQ handler
The TX and RX irq handlers are identical. Merge them
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 4 Nov 2009 07:58:20 +0000 (09:58 +0200)]
ASoC: TWL4030: Do not modify the APLL_CTL register
APLL_CTL register is configured by the twl4030-codec MFD
driver.
Remove code, which makes changes in the APLL_CTL register,
and replace those with checks against the configured
audio_mclk configuration done in the MFD driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 10 Nov 2009 12:08:12 +0000 (12:08 +0000)]
Merge branch 'twl4030-mfd' into for-2.6.33
Peter Ujfalusi [Wed, 4 Nov 2009 07:58:19 +0000 (09:58 +0200)]
MFD: twl4030-codec: APLL_INFREQ handling in the MFD driver
Configure the APLL_INFREQ field in the APLL_CTL register
based on the platform data.
Provide also a function for childs to query the audio_mclk
frequency.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 4 Nov 2009 07:58:18 +0000 (09:58 +0200)]
OMAP: Configure audio_mclk for twl4030-codec MFD
audio_mclk value is going to be handled by the
twl4030-codec MFD driver, configure the correct
value for boards, which is using the twl4030 audio.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 4 Nov 2009 07:58:17 +0000 (09:58 +0200)]
MFD: TWL4030: Add audio_mclk to the codec platform data
Add audio_mclk to the platform data struct for the
twl4030-codec MFD driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Graeme Gregory [Mon, 9 Nov 2009 19:02:15 +0000 (19:02 +0000)]
ASoC: omap-mcbsp - add support for upto 16 channels.
This patch increases the number of supported audio channels from 4
to 16 and has been sponsored by Shotspotter Inc. It also fixes a
FSYNC rate calculation bug when McBSP is FSYNC master.
Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jarkko Nikula [Mon, 9 Nov 2009 06:44:32 +0000 (08:44 +0200)]
ASoC: Pandora: Pass SRG input clock frequency to the OMAP McBSP DAI
Upcoming change to omap-mcbsp.c require that machine drivers using OMAP
as a DAI master to pass sample rate generator input clock frequency to
the omap-mcbsp.c DAI driver.
Pandora is using 256*Fs output from the TWL4030 codec as an input clock to
the McBSP sample rate generator.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Grant Likely [Sat, 7 Nov 2009 08:34:43 +0000 (01:34 -0700)]
ASoC/mpc5200: fix enable/disable of AC97 slots
The MPC5200 AC97 driver is disabling the slots when a stop
trigger is received, but not reenabling them if the stream
is started again without processing the hw_params again.
This patch fixes the problem by caching the slot enable bit
settings calculated at hw_params time so that they can be
reapplied every time the start trigger is received.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Grant Likely [Sat, 7 Nov 2009 08:34:31 +0000 (01:34 -0700)]
ASoC/mpc5200: add to_psc_dma_stream() helper
Move the resolving of the psc_dma_stream pointer to a helper function
to reduce duplicate code
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Grant Likely [Sat, 7 Nov 2009 08:34:18 +0000 (01:34 -0700)]
ASoC/mpc5200: Improve printk debug output for trigger
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Grant Likely [Sat, 7 Nov 2009 08:34:05 +0000 (01:34 -0700)]
ASoC/mpc5200: get rid of the appl_ptr tracking nonsense
Sound drivers PCM DMA is supposed to free-run until told to stop
by the trigger callback. The current code tries to track appl_ptr,
to avoid stale buffer data getting played out at the end of the
data stream. Unfortunately it also results in race conditions
which can cause the audio to stall.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Grant Likely [Sat, 7 Nov 2009 08:33:53 +0000 (01:33 -0700)]
ASoC/mpc5200: Track DMA position by period number instead of bytes
All DMA blocks are lined up to period boundaries, but the DMA
handling code tracks bytes instead. This patch reworks the code
to track the period index into the DMA buffer instead of the
physical address pointer. Doing so makes the code simpler and
easier to understand.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Takashi Iwai [Sat, 7 Nov 2009 09:18:22 +0000 (10:18 +0100)]
ASoC: Remove dead code and labels
Remove the dead code and labels "card_err" in the error paths of
some codec drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark Brown [Fri, 6 Nov 2009 15:46:18 +0000 (15:46 +0000)]
Merge branch 'for-2.6.32' into for-2.6.33
Jassi Brar [Fri, 6 Nov 2009 09:00:24 +0000 (18:00 +0900)]
ASoC: S3C64XX I2S: Enable audio-bus clock
Added the missing clk_enable after acquiring the 'audio-bus' clock.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Janusz Krzysztofik [Wed, 21 Oct 2009 21:10:03 +0000 (23:10 +0200)]
ASoC: OMAP: Don't try to set unsupported OMAP_DMA_DATA_BURST_16 on OMAP1
After DMA burst mode has been introduced in sound/soc/omap/omap-pcm.c,
omap_pcm_prepare() unconditionally calls:
omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
Current implementation of those two functions found in
arch/arm/plat-ompa/dma.c doesn't support OMAP_DMA_DATA_BURST_16 on OMAP1 at
all, so they both end with BUG() on that machine. That results in
ASoC being completely unusable, at least on my OMAP5910 based Amstrad Delta.
The patch corrects the problem by not calling those two functions when run on
OMAP1 class based machines.
Created against linux-2.6.32-rc5.
Tested on Amstrad Delta.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 4 Nov 2009 21:43:27 +0000 (21:43 +0000)]
ASoC: Update ads117x to current APIs
Probe as a platform driver (ads117x) and remove the call to
snd_soc_init_card().
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Graeme Gregory [Wed, 4 Nov 2009 17:49:22 +0000 (17:49 +0000)]
ASoC: ADS117x ADC driver
This patch adds support for the TI ADS117x family of multichannel ADCs
and was sponsored by Shotspotter Inc.
Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 3 Nov 2009 22:13:13 +0000 (22:13 +0000)]
ASoC: Factor out snd_soc_init_card()
snd_soc_init_card() is always called as the last part of the CODEC probe
function so we can factor it out into the core card setup rather than
have each CODEC replicate the code to do the initialiastation. This will
be required to support multiple CODECs per card.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 3 Nov 2009 21:56:13 +0000 (21:56 +0000)]
ASoC: Move sysfs and debugfs functions to head of soc-core.c
A fairly hefty change in diff terms but no actual code changes, will be
used by the next commit.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 3 Nov 2009 22:13:30 +0000 (22:13 +0000)]
ASoC: Staticise wm8727 driver structure
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Linus Torvalds [Tue, 3 Nov 2009 19:37:49 +0000 (11:37 -0800)]
Linux 2.6.32-rc6
Linus Torvalds [Tue, 3 Nov 2009 19:15:25 +0000 (11:15 -0800)]
Merge branch 'for-linus' of git://github.com/at91linux/linux-2.6-at91
* 'for-linus' of git://github.com/at91linux/linux-2.6-at91:
at91: at91sam9g45 family: identify several chip versions
avr32: add two new at91 to cpu.h definition
Nicolas Ferre [Mon, 21 Sep 2009 10:03:56 +0000 (12:03 +0200)]
at91: at91sam9g45 family: identify several chip versions
cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds
the capacity to differentiate Engineering Samples and final lots through the
inclusion of at91_cpu_fully_identify() and the related chip IDs with chip
version field preserved.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Nicolas Ferre [Mon, 6 Jul 2009 10:15:12 +0000 (12:15 +0200)]
avr32: add two new at91 to cpu.h definition
Somme common drivers will need those at91 cpu_is_xxx() definitions. As
at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch
that adds those chips to cpu.h in AVR32 architecture.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Linus Torvalds [Tue, 3 Nov 2009 16:09:57 +0000 (08:09 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits)
MIPS: O32: Fix ppoll
MIPS: Oprofile: Rename cpu_type from godson2 to loongson2
MIPS: Alchemy: Fix hang with high-frequency edge interrupts
MIPS: TXx9: Fix spi-baseclk value
MIPS: bcm63xx: Set the correct BCM3302 CPU name
MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store
MIPS: Avoid potential hazard on Context register
MIPS: Octeon: Use lockless interrupt controller operations when possible.
MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity
MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache
MIPS: SMTC: Avoid queing multiple reschedule IPIs
MIPS: GCMP: Avoid accessing registers when they are not present
MIPS: GIC: Random fixes and enhancements.
MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start
MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands
MIPS: SPRAM: Clean up support code a little
MIPS: 1004K: Enable SPRAM support.
MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4
MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT.
MIPS: MTI: Fix accesses to device registers on MIPS boards
...
This page took 0.044444 seconds and 5 git commands to generate.