Arnd Bergmann [Fri, 5 Sep 2014 15:40:32 +0000 (17:40 +0200)]
Merge tag 'renesas-dt-timers-for-v3.18' of git://git./linux/kernel/git/horms/renesas into next/soc
Merge "Renesas ARM Based SoC DT Timers Updates for v3.18" from Simon Horman:
* Enable timers using DT when booting boards without Legacy-C code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-dt-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: genmai-reference: Enable MTU2 in device tree
ARM: shmobile: r7s72100: Add MTU2 device to DT
ARM: shmobile: marzen-reference: Enable TMU0 in device tree
ARM: shmobile: koelsch-reference: Enable CMT0 in device tree
ARM: shmobile: lager-reference: Enable CMT0 in device tree
ARM: shmobile: r8a7779: Add TMU devices to DT
ARM: shmobile: r8a7791: Add CMT devices to DT
ARM: shmobile: r8a7790: Add CMT devices to DT
Conflicts:
arch/arm/mach-shmobile/setup-r8a7779.c
Arnd Bergmann [Fri, 5 Sep 2014 15:36:52 +0000 (17:36 +0200)]
Merge tag 'renesas-r8a7740-ccf-and-timers-for-v3.18' of git://git./linux/kernel/git/horms/renesas into next/soc
Merge "Renesas ARM Based SoC R8a7740 CCF and Timers Updates for v3.18" from Simon Horman:
When booting using the r8a7740/armadillo800eva using dt-reference:
* Use CCF to initialise clocks via DT
* Initialise timers via DT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-r8a7740-ccf-and-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7740: Remove r8a7740_add_standard_devices_dt
ARM: shmobile: armadillo800eva-reference: Do not use r8a7740_add_standard_devices_dt()
ARM: shmobile: armadillo800eva-reference: Enable CMT1 in device tree
ARM: shmobile: r8a7740: Add CMT1 device to DT
ARM: shmobile: armadillo800eva-reference: add clock overrides to DTS
ARM: shmobile: r8a7740: add MSTP clock assignments to DT
ARM: shmobile: r8a7740: add SoC clocks to DTS
ARM: shmobile: r8a7740: clock register bits
Arnd Bergmann [Fri, 5 Sep 2014 15:29:29 +0000 (17:29 +0200)]
Merge tag 'renesas-soc2-for-v3.18' of git://git./linux/kernel/git/horms/renesas into next/soc
Merge "Second Round Of Renesas ARM Based SoC Updates For v3.18" from Simon Horman:
* Move legacy INTC definitions from irqs.h to intc.h
* Remove duplicate CPUFreq bits on r8a73a0/ape6evm
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-soc2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Move legacy INTC definitions from irqs.h to intc.h
ARM: shmobile: ape6evm: Remove duplicate CPUFreq bits
ARM: shmobile: sh73a0: Remove duplicate CPUFreq bits
Arnd Bergmann [Fri, 5 Sep 2014 15:11:36 +0000 (17:11 +0200)]
Merge tag 'renesas-init-delay-for-v3.18' of git://git./linux/kernel/git/horms/renesas into next/soc
Merge "Renesas ARM Based SoC Init Delay Updates For v3.18" from Simon Horman:
* Use shmobile_init_delay across a wider range of SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-init-delay-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: kzm9g: Use shmobile_init_delay()
ARM: shmobile: bockw: Use shmobile_init_delay()
ARM: shmobile: r8a7778: Use shmobile_init_delay()
ARM: shmobile: sh73a0: Use shmobile_init_delay()
ARM: shmobile: Remove shmobile_setup_delay()
ARM: shmobile: r8a73a4: Use shmobile_init_delay()
ARM: shmobile: sh7372: Use shmobile_init_delay()
ARM: shmobile: r8a7778: Update DTS to include CPU frequency
ARM: shmobile: sh73a0: Update DTS to include CPU frequency
ARM: shmobile: sh7372: Update DTS to include CPU frequency
ARM: shmobile: kzm9g-reference: Remove unneeded nr_irqs initialization
ARM: shmobile: kzm9g: Remove unneeded nr_irqs initialization
ARM: shmobile: marzen: Remove NR_IRQS_LEGACY
ARM: shmobile: ape6evm: Use shmobile_init_delay()
ARM: shmobile: ape6evm: Add shmobile_init_late()
ARM: shmobile: bockw: Add shmobile_init_late()
ARM: shmobile: marzen: Add shmobile_init_late()
ARM: shmobile: kzm9g: Add shmobile_init_late()
Arnd Bergmann [Fri, 5 Sep 2014 15:08:14 +0000 (17:08 +0200)]
Merge tag 'renesas-soc-for-v3.18' of git://git./linux/kernel/git/horms/renesas into next/soc
Merge "Renesas ARM Based SoC Updates for v3.18" from Simon Horman:
* Remove unnecessary nr_irqs initialisation on sh73a0, sh7372,
and r8a7779 SoCs
* Use defines hardcoded numbers for DMA
* Rework multiplatform include workaround
* Correctly use shmobile_init_late on a wider range of SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-soc-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: sh73a0: Remove unneeded nr_irqs initialization
ARM: shmobile: sh7372: Remove unneeded nr_irqs initialization
ARM: shmobile: r8a7779: Remove NR_IRQS_LEGACY
ARM: shmobile: dma: Use defines instead of hardcoded numbers
ARM: shmobile: Rework multiplatform include workaround
ARM: shmobile: r7s72100: Add shmobile_init_late()
ARM: shmobile: r8a73a4: Add shmobile_init_late()
ARM: shmobile: r8a7778: Fix shmobile_init_late()
ARM: shmobile: r8a7779: Fix shmobile_init_late()
ARM: shmobile: sh73a0: Add shmobile_init_late()
ARM: shmobile: r8a7778: Add missing call to shmobile_init_late()
Alexander Shiyan [Tue, 19 Aug 2014 12:31:15 +0000 (16:31 +0400)]
ARM: clps711x: Add SOC BUS support
Add SOC BUS support with CPU family, machine name and unique ID.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Alexander Shiyan [Tue, 19 Aug 2014 12:31:14 +0000 (16:31 +0400)]
ARM: clps711x:
edb7211: Use new PWM driver for backlight
Remove existing tricks for handling PWM and use CLPS711X PWM driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Simon Horman [Tue, 12 Aug 2014 00:04:42 +0000 (09:04 +0900)]
ARM: shmobile: r8a7740: Remove r8a7740_add_standard_devices_dt
Now that r8a7740_add_standard_devices_dt() is simply a wrapper
for a call to of_platform_populate() remove it and call
of_platform_populate() directly.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 12 Aug 2014 00:04:41 +0000 (09:04 +0900)]
ARM: shmobile: armadillo800eva-reference: Do not use r8a7740_add_standard_devices_dt()
Now that r8a7740_add_standard_devices_dt() is just a wrapper for
of_platform_populate() call the latter directly.
This is in preparation for removing r8a7740_add_standard_devices_dt().
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 12 Aug 2014 00:04:39 +0000 (09:04 +0900)]
ARM: shmobile: armadillo800eva-reference: Enable CMT1 in device tree
Based on work by Magnus Damm
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 12 Aug 2014 00:04:38 +0000 (09:04 +0900)]
ARM: shmobile: r8a7740: Add CMT1 device to DT
Add the CMT1 counters to the r8a7740 device tree and make it
disabled by default.
Based on work by Magnus Damm.
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ulrich Hecht [Fri, 8 Aug 2014 14:23:12 +0000 (16:23 +0200)]
ARM: shmobile: armadillo800eva-reference: add clock overrides to DTS
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ulrich Hecht [Fri, 8 Aug 2014 14:23:11 +0000 (16:23 +0200)]
ARM: shmobile: r8a7740: add MSTP clock assignments to DT
Assigns clocks to ether, i2c*, scif*, tpu, mmcif0, sdhi*, and fsi2.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ulrich Hecht [Fri, 8 Aug 2014 14:23:10 +0000 (16:23 +0200)]
ARM: shmobile: r8a7740: add SoC clocks to DTS
Declares the r8a7740 clocks supported by the legacy clock framework,
excluding those requiring extensions to the DIV6 driver.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ulrich Hecht [Fri, 8 Aug 2014 14:23:09 +0000 (16:23 +0200)]
ARM: shmobile: r8a7740: clock register bits
Contains the header file with the clock pulse generator and MSTP bits.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 20 Aug 2014 13:39:23 +0000 (15:39 +0200)]
ARM: shmobile: Move legacy INTC definitions from irqs.h to intc.h
Move all definitions for legacy INTC from the common "irqs.h" to the
INTC-specific "intc.h".
Include "intc.h" in sh7372/sh73a0 CPU and board files where needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
[horms+renesas@verge.net.au: omitted whitespace change]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:10:15 +0000 (22:10 +0900)]
ARM: shmobile: ape6evm: Remove duplicate CPUFreq bits
The CPUFreq platform device is already registered by
shmobile_init_late(), so get rid of ape6evm specific bits.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:07:07 +0000 (22:07 +0900)]
ARM: shmobile: sh73a0: Remove duplicate CPUFreq bits
The CPUFreq platform device is already registered by
shmobile_init_late(), so get rid of sh73a0 specific bits.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:03:30 +0000 (22:03 +0900)]
ARM: shmobile: kzm9g: Use shmobile_init_delay()
Adjust the KZM9G board support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:03:21 +0000 (22:03 +0900)]
ARM: shmobile: bockw: Use shmobile_init_delay()
Adjust the BockW board support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:02:54 +0000 (22:02 +0900)]
ARM: shmobile: r8a7778: Use shmobile_init_delay()
Adjust the r8a7778 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:02:45 +0000 (22:02 +0900)]
ARM: shmobile: sh73a0: Use shmobile_init_delay()
Adjust the sh73a0 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:03:12 +0000 (22:03 +0900)]
ARM: shmobile: Remove shmobile_setup_delay()
All ARM mach-shmobile SoCs and boards now rely on DTS for
CPU Frequency information, so remove the unused function
shmobile_setup_delay(). While at it, make the function
shmobile_setup_delay_hz() static.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:03:03 +0000 (22:03 +0900)]
ARM: shmobile: r8a73a4: Use shmobile_init_delay()
Adjust the r8a73a4 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version and r8a73a4_init_early() that now are unused.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:02:36 +0000 (22:02 +0900)]
ARM: shmobile: sh7372: Use shmobile_init_delay()
Adjust the sh7372 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:02:27 +0000 (22:02 +0900)]
ARM: shmobile: r8a7778: Update DTS to include CPU frequency
Add CPU Frequency information to the r8a7778 DTS file. This
will allow us to use the shared C code on r8a7778 and BockW
which reads out the clock frequency from DT and calculates the
delay settings from there.
Also add other missing CPU information to the r8a7778 DTS.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:02:19 +0000 (22:02 +0900)]
ARM: shmobile: sh73a0: Update DTS to include CPU frequency
Add CPU Frequency information to the sh73a0 DTS file. This
will allow us to use the shared C code on sh73a0 and KZM9G
which reads out the clock frequency from DT and calculates the
delay settings from there.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Aug 2014 13:02:10 +0000 (22:02 +0900)]
ARM: shmobile: sh7372: Update DTS to include CPU frequency
Add CPU Frequency information to the sh7372 DTS file. This
will allow us to use the shared C code on sh7372 and Mackerel
which reads out the clock frequency from DT and calculates the
delay settings from there.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Fri, 22 Aug 2014 02:31:47 +0000 (11:31 +0900)]
Merge branch 'boards-for-v3.18' into soc-init-delay-for-v3.18.base
Geert Uytterhoeven [Wed, 13 Aug 2014 11:56:57 +0000 (13:56 +0200)]
ARM: shmobile: sh73a0: Remove unneeded nr_irqs initialization
As per arch_probe_nr_irqs(), the default value is NR_IRQS, which maps to
NR_IRQS_LEGACY if CONFIG_SPARSE_IRQ=y.
Since SPARSE_IRQ is selected by both ARCH_MULTIPLATFORM and
ARCH_SHMOBILE_LEGACY, it's always enabled on shmobile.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 13 Aug 2014 11:56:56 +0000 (13:56 +0200)]
ARM: shmobile: sh7372: Remove unneeded nr_irqs initialization
As per arch_probe_nr_irqs(), the default value is NR_IRQS, which maps to
NR_IRQS_LEGACY if CONFIG_SPARSE_IRQ=y.
Since SPARSE_IRQ is selected by both ARCH_MULTIPLATFORM and
ARCH_SHMOBILE_LEGACY, it's always enabled on shmobile.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 8 Aug 2014 11:49:04 +0000 (20:49 +0900)]
ARM: shmobile: r8a7779: Remove NR_IRQS_LEGACY
Remove NR_IRQS_LEGACY from the r8a7779 generic machine
vector. The generic r8a7779 machine vector requires use
of Multiplatform, and in such case SPARSE_IRQ is enabled
by default. This in turns means that the default value
of .nr_irqs equals NR_IRQS and NR_IRQS_LEGACY. Because
of this we can simply remove NR_IRQS_LEGACY and move one
step closer to a cruft-free environment.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Tue, 5 Aug 2014 13:21:29 +0000 (15:21 +0200)]
ARM: shmobile: dma: Use defines instead of hardcoded numbers
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Thu, 31 Jul 2014 00:25:15 +0000 (09:25 +0900)]
ARM: shmobile: Rework multiplatform include workaround
Now when the majority of the include files have moved from
arch/arm/mach-shmobile/include/mach/ to arch/arm/mach-shmobile/
remove the header include file workaround in the Makefile...
... and add another workaround in irqs.h to cope with the fact
that <mach/irqs.h> needs to be where it is until the PFC code
has been updated to remove legacy non-DT interfaces.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:33:26 +0000 (08:33 +0900)]
ARM: shmobile: r7s72100: Add shmobile_init_late()
Extend r7s72100 SoC machine vector to include shmobile_init_late()
so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:33:08 +0000 (08:33 +0900)]
ARM: shmobile: r8a73a4: Add shmobile_init_late()
Extend r8a73a4 SoC machine vector to include shmobile_init_late()
so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:32:50 +0000 (08:32 +0900)]
ARM: shmobile: r8a7778: Fix shmobile_init_late()
Fix r8a7778 SoC machine vector to include shmobile_init_late()
so Suspend-to-RAM and CPUIdle are setup and platform devices
are omitted as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:32:33 +0000 (08:32 +0900)]
ARM: shmobile: r8a7779: Fix shmobile_init_late()
Fix r8a7779 SoC machine vector to include shmobile_init_late()
so Suspend-to-RAM and CPUIdle are setup and platform devices
are omitted as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:32:15 +0000 (08:32 +0900)]
ARM: shmobile: sh73a0: Add shmobile_init_late()
Extend sh73a0 SoC machine vector to include shmobile_init_late()
so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 13 Aug 2014 11:56:58 +0000 (13:56 +0200)]
ARM: shmobile: kzm9g-reference: Remove unneeded nr_irqs initialization
As per arch_probe_nr_irqs(), the default value is NR_IRQS, which maps to
NR_IRQS_LEGACY if CONFIG_SPARSE_IRQ=y.
Since SPARSE_IRQ is selected by both ARCH_MULTIPLATFORM and
ARCH_SHMOBILE_LEGACY, it's always enabled on shmobile.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 13 Aug 2014 11:56:59 +0000 (13:56 +0200)]
ARM: shmobile: kzm9g: Remove unneeded nr_irqs initialization
As per arch_probe_nr_irqs(), the default value is NR_IRQS, which maps to
NR_IRQS_LEGACY if CONFIG_SPARSE_IRQ=y.
Since SPARSE_IRQ is selected by both ARCH_MULTIPLATFORM and
ARCH_SHMOBILE_LEGACY, it's always enabled on shmobile.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 8 Aug 2014 11:49:13 +0000 (20:49 +0900)]
ARM: shmobile: marzen: Remove NR_IRQS_LEGACY
Remove NR_IRQS_LEGACY from the Marzen Reference code.
The Marzen Reference machine vector requires use of
Multiplatform, and in such case SPARSE_IRQ is enabled
by default. This in turns means that the default value
of .nr_irqs equals NR_IRQS and NR_IRQS_LEGACY. Because
of this we can simply remove NR_IRQS_LEGACY and move one
step closer to a cruft-free environment.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:45:00 +0000 (08:45 +0900)]
ARM: shmobile: ape6evm: Use shmobile_init_delay()
The r8a73a4 DTS includes CPU Frequency information so
adjust the APE6EVM board code to use shmobile_init_delay()
instead of relying on CPU Frequency information included
in r8a73a4_init_delay() that is specified in C.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:33:17 +0000 (08:33 +0900)]
ARM: shmobile: ape6evm: Add shmobile_init_late()
Extend board specific APE6EVM reference machine vectors to include
shmobile_init_late() so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:32:59 +0000 (08:32 +0900)]
ARM: shmobile: bockw: Add shmobile_init_late()
Extend board specific Bock-W DT reference machine vector to include
shmobile_init_late() so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:32:41 +0000 (08:32 +0900)]
ARM: shmobile: marzen: Add shmobile_init_late()
Extend board specific Marzen DT reference machine vector to include
shmobile_init_late() so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 30 Jul 2014 23:32:24 +0000 (08:32 +0900)]
ARM: shmobile: kzm9g: Add shmobile_init_late()
Extend board specific KZM9D DT reference machine vector to include
shmobile_init_late() so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 13 Aug 2014 11:45:00 +0000 (13:45 +0200)]
ARM: shmobile: r8a7778: Add missing call to shmobile_init_late()
Add the missing call to shmobile_init_late() to r8a7778_init_late().
This should make sure Suspend-to-RAM and CPUIdle are setup as expected
on bockw.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 9 Jul 2014 13:12:44 +0000 (15:12 +0200)]
ARM: shmobile: genmai-reference: Enable MTU2 in device tree
No more device needs to be added from platform code when booting the
reference platform, move MTU2 registration from setup-r7s72100.c to
board-genmai.c and remove the now empty r7s72100_add_dt_devices()
function.
As the genmai_add_standard_devices() function is now identical to the
default init_machine implementation, remove it as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 9 Jul 2014 13:12:40 +0000 (15:12 +0200)]
ARM: shmobile: r7s72100: Add MTU2 device to DT
Add the MTU2 counter to the r7s72100 device tree and make it disabled by
default.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[horms+renesas@verge.net.au correct irq number]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 9 Jul 2014 13:12:43 +0000 (15:12 +0200)]
ARM: shmobile: marzen-reference: Enable TMU0 in device tree
No more device needs to be added from platform code when booting the
reference platform, remove the now empty
r8a7779_add_standard_devices_dt() function completely.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 9 Jul 2014 13:12:42 +0000 (15:12 +0200)]
ARM: shmobile: koelsch-reference: Enable CMT0 in device tree
No more device needs to be added from platform code when booting the
reference platform, remove the now empty r8a7791_add_dt_devices()
function completely.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 9 Jul 2014 13:12:41 +0000 (15:12 +0200)]
ARM: shmobile: lager-reference: Enable CMT0 in device tree
No more device needs to be added from platform code when booting the
reference platform, remove the now empty r8a7790_add_dt_devices()
function completely.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 9 Jul 2014 13:12:39 +0000 (15:12 +0200)]
ARM: shmobile: r8a7779: Add TMU devices to DT
Add the TMU0, TMU1 and TMU2 counters to the r8a7779 device tree and make
them disabled by default.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 9 Jul 2014 13:12:38 +0000 (15:12 +0200)]
ARM: shmobile: r8a7791: Add CMT devices to DT
Add the CMT0 and CMT1 counters to the r8a7791 device tree and make them
disabled by default.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 9 Jul 2014 13:12:37 +0000 (15:12 +0200)]
ARM: shmobile: r8a7790: Add CMT devices to DT
Add the CMT0 and CMT1 counters to the r8a7790 device tree and make them
disabled by default.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Linus Torvalds [Sat, 16 Aug 2014 16:40:26 +0000 (10:40 -0600)]
Linux 3.17-rc1
Linus Torvalds [Sat, 16 Aug 2014 15:32:27 +0000 (09:32 -0600)]
Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
Pull x86 platform driver updates from Matthew Garrett:
"A moderate number of changes, but nothing awfully significant.
A lot of const cleanups, some reworking and additions to the rfkill
quirks in the asus driver, a new driver for generating falling laptop
events on Toshibas and some misc fixes.
Maybe vendors have stopped inventing things"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits)
platform/x86: Enable build support for toshiba_haps
Documentation: Add file about toshiba_haps module
platform/x86: Toshiba HDD Active Protection Sensor
asus-nb-wmi: Add wapf4 quirk for the U32U
alienware-wmi: make hdmi_mux enabled on case-by-case basis
ideapad-laptop: Constify DMI table and other r/o variables
asus-nb-wmi.c: Rename x401u quirk to wapf4
compal-laptop: correct invalid hwmon name
toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list
toshiba_acpi: Add extra check to backlight code
Fix log message about future removal of interface
ideapad-laptop: Disable touchpad interface on Yoga models
asus-nb-wmi: Add wapf4 quirk for the X550CC
intel_ips: Make ips_mcp_limits variables static
thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata
fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst
hp-wmi: Add missing __init annotations to initialization code
hp_accel: Constify ACPI and DMI tables
fujitsu-tablet: Mark DMI callbacks as __init code
dell-laptop: Mark dell_quirks[] DMI table as __initconst
...
Linus Torvalds [Sat, 16 Aug 2014 15:25:34 +0000 (09:25 -0600)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux
Pull idle update from Len Brown:
"Two Intel-platform-specific updates to intel_idle, and a cosmetic
tweak to the turbostat utility"
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: tweak whitespace in output format
intel_idle: Broadwell support
intel_idle: Disable Baytrail Core and Module C6 auto-demotion
Linus Torvalds [Sat, 16 Aug 2014 15:24:41 +0000 (09:24 -0600)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/rusty/linux
Pull module fix from Rusty Russell:
"Nasty potential bug if someone uses a known module param with an
invalid value (we don't fail unknown module params any more, just
warn)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: Clean up ro/nx after early module load failures
Linus Torvalds [Sat, 16 Aug 2014 15:23:15 +0000 (09:23 -0600)]
Merge branch 'rng-queue' of git://git./linux/kernel/git/amit/virtio
Pull virtio-rng update from Amit Shah:
"Add derating factor for use by hwrng core
Sending directly to you with the commit log changes Ted Ts'o pointed
out. Not sure if Rusty's back after his travel, but this already has
his s-o-b"
* 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio:
virtio: rng: add derating factor for use by hwrng core
Linus Torvalds [Sat, 16 Aug 2014 15:06:55 +0000 (09:06 -0600)]
Merge branch 'for-linus2' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
"These are all fixes I'd like to get out to a broader audience.
The biggest of the bunch is Mark's quota fix, which is also in the
SUSE kernel, and makes our subvolume quotas dramatically more
accurate.
I've been running xfstests with these against your current git
overnight, but I'm queueing up longer tests as well"
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: disable strict file flushes for renames and truncates
Btrfs: fix csum tree corruption, duplicate and outdated checksums
Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch
Btrfs: fix compressed write corruption on enospc
btrfs: correctly handle return from ulist_add
btrfs: qgroup: account shared subtrees during snapshot delete
Btrfs: read lock extent buffer while walking backrefs
Btrfs: __btrfs_mod_ref should always use no_quota
btrfs: adjust statfs calculations according to raid profiles
Linus Torvalds [Sat, 16 Aug 2014 14:58:47 +0000 (08:58 -0600)]
Merge tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux
Pull file locking bugfixes from Jeff Layton:
"Most of these patches are to fix a long-standing regression that crept
in when the BKL was removed from the file-locking code. The code was
converted to use a conventional spinlock, but some fl_release_private
ops can block and you can end up sleeping inside the lock.
There's also a patch to make /proc/locks show delegations as 'DELEG'"
* tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux:
locks: update Locking documentation to clarify fl_release_private behavior
locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock
locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped
locks: don't reuse file_lock in __posix_lock_file
locks: don't call locks_release_private from locks_copy_lock
locks: show delegations as "DELEG" in /proc/locks
Linus Torvalds [Sat, 16 Aug 2014 14:56:27 +0000 (08:56 -0600)]
Merge git://git.kvack.org/~bcrl/aio-next
Pull aio updates from Ben LaHaise.
* git://git.kvack.org/~bcrl/aio-next:
aio: use iovec array rather than the single one
aio: fix some comments
aio: use the macro rather than the inline magic number
aio: remove the needless registration of ring file's private_data
aio: remove no longer needed preempt_disable()
aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx()
aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()
Azael Avalos [Thu, 14 Aug 2014 15:55:40 +0000 (09:55 -0600)]
platform/x86: Enable build support for toshiba_haps
Makefile and Kconfig build support patch for the newly introduced
kernel module toshiba_haps.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Azael Avalos [Thu, 14 Aug 2014 15:55:39 +0000 (09:55 -0600)]
Documentation: Add file about toshiba_haps module
This patch provides information about the Toshiba HDD
Active Protection Sensor driver module toshiba_haps.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Azael Avalos [Thu, 14 Aug 2014 15:55:38 +0000 (09:55 -0600)]
platform/x86: Toshiba HDD Active Protection Sensor
This driver adds support for the built-in accelereometer found
on recent Toshiba laptops with HID TOS620A.
This driver receives ACPI notify events 0x80 when the sensor
detects a sudden move or a harsh vibration, as well as an
ACPI notify event 0x81 whenever the movement or vibration has
been stabilized.
Also provides sysfs entries to get/set the desired protection
level and reseting the HDD protection interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hans de Goede [Tue, 29 Jul 2014 09:59:57 +0000 (11:59 +0200)]
asus-nb-wmi: Add wapf4 quirk for the U32U
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/
1173681
the U32U needs wapf=4 too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mario Limonciello [Thu, 24 Jul 2014 04:19:23 +0000 (23:19 -0500)]
alienware-wmi: make hdmi_mux enabled on case-by-case basis
Not all HW supporting WMAX method will support the HDMI mux feature.
Explicitly quirk the HW that does support it.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:15 +0000 (19:43 +0200)]
ideapad-laptop: Constify DMI table and other r/o variables
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table
and the ideapad_attribute_group attribute group. There's no need to have
them writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hans de Goede [Mon, 14 Jul 2014 07:14:34 +0000 (09:14 +0200)]
asus-nb-wmi.c: Rename x401u quirk to wapf4
The actual x401u does not use the so named x401u quirk but the x55u quirk.
All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to
stop the confusion.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Roald Frederickx [Wed, 13 Aug 2014 20:40:14 +0000 (13:40 -0700)]
compal-laptop: correct invalid hwmon name
Change the name of the hwmon interface from "compal-laptop" to "compal".
A dash is an invalid character for a hwmon name and caused the call to
hwmon_device_register_with_groups() to fail.
Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Azael Avalos [Mon, 4 Aug 2014 15:21:02 +0000 (09:21 -0600)]
toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list
The Toshiba Qosmio X75-A series models also come with
the new keymap layout.
This patch adds this model to the alt_keymap_dmi list,
along with an extra key found on these models.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Azael Avalos [Mon, 4 Aug 2014 15:21:01 +0000 (09:21 -0600)]
toshiba_acpi: Add extra check to backlight code
Some Toshiba models (most notably Qosmios) come with an
incomplete backlight method where the AML code doesn't
check for write or read commands and always returns
HCI_SUCCESS and the actual brightness (and in some
cases the max brightness), thus allowing the backlight
interface to be registered without write support.
This patch changes the set_lcd_brightness function,
checking the returned values for values greater than
zero to avoid registering a broken backlight interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Martin Kepplinger [Sat, 26 Jul 2014 15:46:06 +0000 (17:46 +0200)]
Fix log message about future removal of interface
If this is going away, it won't be in 2012.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hans de Goede [Fri, 18 Jul 2014 10:21:47 +0000 (12:21 +0200)]
ideapad-laptop: Disable touchpad interface on Yoga models
Yoga models don't offer touchpad ctrl through the ideapad interface, causing
ideapad_sync_touchpad_state to send wrong touchpad enable/disable events.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hans de Goede [Fri, 18 Jul 2014 10:15:09 +0000 (12:15 +0200)]
asus-nb-wmi: Add wapf4 quirk for the X550CC
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/
1173681
the X550CC needs wapf=4 too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:16 +0000 (19:43 +0200)]
intel_ips: Make ips_mcp_limits variables static
These variables don't need to be visible outside of this compilation
unit, make them static.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:17 +0000 (19:43 +0200)]
thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata
Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata,
as snd_ctl_new1() will copy the relevant parts, so there is no need to
keep the master copies around after initialization.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:11 +0000 (19:43 +0200)]
fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst
The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released afterwards -- roughly 1.5 kB.
In turn, the callback functions can be marked with __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:13 +0000 (19:43 +0200)]
hp-wmi: Add missing __init annotations to initialization code
These functions are only called from other initialization routines, so
can be marked __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:14 +0000 (19:43 +0200)]
hp_accel: Constify ACPI and DMI tables
Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI
tables. There's no need to have them writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:12 +0000 (19:43 +0200)]
fujitsu-tablet: Mark DMI callbacks as __init code
The DMI table is already marked as __initconst, so can be the callback
functions as they're only used in that context.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Robert Gerlach <khnz@gmx.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:09 +0000 (19:43 +0200)]
dell-laptop: Mark dell_quirks[] DMI table as __initconst
The dell_quirks[] DMI table is only ever used during initialization.
Mark it as __initconst so its memory can be released afterwards --
roughly 5.7 kB. In turn, the callback function can be marked with
__init, too.
Also the touchpad_led_init() function can be marked __init as it's only
referenced from dell_init() -- an __init function.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:10 +0000 (19:43 +0200)]
eeepc-wmi: Constify asus_quirks[] DMI table
Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:04 +0000 (19:43 +0200)]
acer-wmi: Mark init data and code as such
Quite a lot of code and data of acer-wmi.c is only ever used during
initialization. Mark those accordingly -- and constify, where
appropriate -- so the memory can be released afterwards.
All in all those changes move ~10 kB of code and data to the .init
sections, marking them for release after initialization has finished.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:08 +0000 (19:43 +0200)]
asus-nb-wmi: Constify asus_quirks[] DMI table
Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:07 +0000 (19:43 +0200)]
alienware-wmi: Mark DMI table as __initconst
The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released appropriately. In turn, the
callback function can be marked with __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:06 +0000 (19:43 +0200)]
acer-wmi: Hide acer_{suspend,resume} for !CONFIG_PM_SLEEP
Encapsulate acer_suspend() and acer_resume with #ifdef CONFIG_PM_SLEEP
to get rid of the following warnings:
../acer-wmi.c:2046:12: warning: ‘acer_suspend’ defined but not used [-Wunused-function]
../acer-wmi.c:2068:12: warning: ‘acer_resume’ defined but not used [-Wunused-function]
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:05 +0000 (19:43 +0200)]
acer-wmi: Mark acer_wmi_keymap[] as __initconst
sparse_keymap_setup() will make a copy of the keymap, so we can release
the master copy after initialization.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Mathias Krause [Wed, 16 Jul 2014 17:43:03 +0000 (19:43 +0200)]
MAINTAINERS: Update git URL for x86 platform drivers
The repo on kernel.org is no longer available but has a replacement at
cavan.codon.org.uk.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Himangi Saraogi [Tue, 15 Jul 2014 17:19:11 +0000 (22:49 +0530)]
WMI: Remove unnecessary null test
This patch removes the null test on block. block is initialized at the
beginning of the function to &wblock->gblock. Since wblock is
dereferenced prior to the null test, wblock must be a valid pointer,
and &wblock->gblock cannot be null.
The following Coccinelle script is used for detecting the change:
@r@
expression e,f;
identifier g,y;
statement S1,S2;
@@
*e = &f->g
<+...
f->y
...+>
*if (e != NULL || ...)
S1 else S2
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Andrey Utkin [Mon, 14 Jul 2014 22:56:21 +0000 (01:56 +0300)]
drivers/platform/x86/thinkpad_acpi.c: don't test unsigned int for negativity
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80231
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hans de Goede [Mon, 14 Jul 2014 07:14:35 +0000 (09:14 +0200)]
asus-nb-wmi: Add wapf4 quirk for the X550CL
As reported here: https://bugs.launchpad.net/bugs/
1277959
the X550CL needs wapf=4 too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
AceLan Kao [Wed, 9 Jul 2014 08:18:19 +0000 (16:18 +0800)]
asus-nb-wmi: Add ASUSTeK COMPUTER INC. X200CA
BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to
control the wifi and wifi-led status.
But, it'll lead to bt status error if asus-wmi driver controls bt as well.
So, for X200CA, asus-wmi driver controls wifi status only and have to set
wapf to 1.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
AceLan Kao [Wed, 9 Jul 2014 08:18:18 +0000 (16:18 +0800)]
asus-wmi: control wlan-led if wapf > 0
Wifi will be controlled by asus-wmi driver when wapf > 0
So, controls the wifi-led when wapf > 0
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hans de Goede [Tue, 8 Jul 2014 08:47:22 +0000 (10:47 +0200)]
asus-wmi: backlight_init: Stop treating -ENODEV as if its not an error
When bl_power support got added to asus-wmi, the error handling for it was
written to ignore -ENODEV, to avoid not registering a backlight interface for
models which have no bl_power control, but do have brightness control.
At the same time the error handling for brightness_max was modified to do the
same, this is wrong, when there is no brightness_max asus-wmi should not
register a backlight interface.
Note the caller of asus_wmi_backlight_init already special cases -ENODEV,
and will not cause the wmi driver regristration to fail because of a
-ENODEV return from asus_wmi_backlight_init.
https://bugzilla.redhat.com/show_bug.cgi?id=
1097436
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hans de Goede [Tue, 8 Jul 2014 08:47:21 +0000 (10:47 +0200)]
asus-wmi: Disable acpi-video backlight on desktop machines
Some Asus motherboards for desktop PC-s export an acpi-video interface
advertising backlight support. Test the dmi chassis-type and tell acpi-video
to not register a backlight interface on desktops.
https://bugzilla.redhat.com/show_bug.cgi?id=
1097436
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hans de Goede [Mon, 23 Jun 2014 14:45:51 +0000 (16:45 +0200)]
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling
It seems that the same problems which lead to adding an rfkill blacklist and
putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13
and Lenovo Yoga 2 Pro too:
https://bugzilla.redhat.com/show_bug.cgi?id=
1021036
https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/
1517612
Testing has shown that the firmware rfkill settings are persistent over
reboots. So blacklisting the driver is not good enough, if the wifi is blocked
at the firmware level the wifi needs to be explictly unblocked through the
ideapad-laptop interface.
And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices
with hardware kill switch reports the hardware switch state, needs to be
explictly set to 1 (radio enabled / not blocked).
So this patch does 3 things to get proper rfkill handling on these models:
1) Instead of blacklisting the rfkill functionality, which means that people
with a firmware blocked wifi get stuck in that situation, ignore the value
reported by the not present hardware rfkill switch, as this is what is causing
ideapad-laptop to wrongly report all radios as hardware blocks. But do register
the rfkill interfaces so that the user can soft [un]block them.
2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1
3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2
series is affected.
Yoga 2 11:
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>
Yoga 2 13:
Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044>
Yoga 2 Pro:
Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Hans de Goede [Mon, 23 Jun 2014 11:38:23 +0000 (13:38 +0200)]
thinkpad_acpi: Update mapping for F12 hotkey on *40 models to KEY_FILE
The new keyboard found on the *40 models is also being sold as a standalone
keyboard (with trackpoint):
http://shop.lenovo.com/us/en/itemdetails/
0B47189/460/
60AC6A0372B14F5BA7B12F1FF88E33C7
This uses a standard HUT code for the F12 key with the 6 square boxes on it,
which gets mapped to KEY_FILE by the kernel. Change the mapping done of
identical laptop key done by thinkpad_acpi to also send KEY_FILE for
consistency.
Cc: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This page took 0.045248 seconds and 5 git commands to generate.