Alan Modra [Sun, 14 Oct 2007 00:00:04 +0000 (00:00 +0000)] 
daily update
Ulrich Weigand [Sat, 13 Oct 2007 00:49:15 +0000 (00:49 +0000)] 
* ia64-linux-nat.c (ia64_register_addr): Add gdbarch parameter,
replacing use of global current_gdbarch.
(ia64_cannot_fetch_register, ia64_cannot_store_register): Likewise.
(ia64_linux_fetch_register, ia64_linux_store_register): Update callers.
* ia64-tdep.c (SIGCONTEXT_REGISTER_ADDRESS): Remove macro.
(ia64_sigtramp_frame_init_saved_regs): Add next_frame parameter,
replace uses of SIGCONTEXT_REGISTER_ADDRESS.
(ia64_sigtramp_frame_cache): Update caller.
Ian Lance Taylor [Sat, 13 Oct 2007 00:15:07 +0000 (00:15 +0000)] 
From Craig Silverstein: use tls.h in x86_64.cc.
Ulrich Weigand [Sat, 13 Oct 2007 00:06:54 +0000 (00:06 +0000)]
* gdbarch.sh (deprecated_use_struct_convention): Remove.
(extract_return_value, store_return_value): Remove.
(return_value): Remove default implementation.
* gdbarch.c, gdbarch.h: Regenerate.
* stack.c (return_command): Remove compatibility hack.
* arch-utils.c (legacy_return_value): Remove.
* arch-utils.h (legacy_return_value): Likewise.
* arch-utils.c (always_use_struct_convention): Remove.
* arch-utils.h (always_use_struct_convention): Likewise.
* value.c (generic_use_struct_convention): Remove.
* defs.h (generic_use_struct_convention): Likewise.
doc/ChangeLog:
* gdbint.texi (Target Conditionals): Remove documentation
of and references to DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS,
gdbarch_extract_return_value, and gdbarch_store_return_value.
Ulrich Weigand [Sat, 13 Oct 2007 00:05:07 +0000 (00:05 +0000)]
* avr-tdep.c (avr_return_value): New function.
(avr_gdbarch_init): Call set_gdbarch_return_value instead of
set_gdbarch_extract_return_value.
* fvr-tdep.c (frv_return_value): New function.
(frv_gdbarch_init): Call set_gdbarch_return_value instead of
set_gdbarch_extract_return_value, set_gdbarch_store_return_value,
and set_gdbarch_deprecated_use_struct_convention.
* ia64-tdep.c (ia64_use_struct_convention): Make static.
Add check for structure, union, or array types.
(ia64_extract_return_value): Make static.
(ia64_store_return_value): Make static. Support multi-word values.
(ia64_return_value): New function.
(ia64_gdbarch_init): Call set_gdbarch_return_value instead of
set_gdbarch_extract_return_value, set_gdbarch_store_return_value,
and set_gdbarch_deprecated_use_struct_convention.
Alan Modra [Sat, 13 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Sat, 13 Oct 2007 00:00:03 +0000 (00:00 +0000)] 
*** empty log message ***
H.J. Lu [Fri, 12 Oct 2007 22:26:55 +0000 (22:26 +0000)] 
2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_operands): Simplify implicit xmm0
handling.
Joel Brobecker [Fri, 12 Oct 2007 21:52:07 +0000 (21:52 +0000)] 
* solib-target.c (solib_target_parse_libraries)
[HAVEHAVE_LIBEXPAT not defined]: Fix thinko in return type.
H.J. Lu [Fri, 12 Oct 2007 21:40:38 +0000 (21:40 +0000)]
gas/
2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_operands): Check the firstxmm0
field in opcode_modifier for instruction with a implicit
xmm0 as the first operand.
opcodes/
2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Add FirstXmm0.
* i386-opc.h (FirstXmm0): New.
(IsPrefix): Updated.
(i386_opcode_modifier): Add firstxmm0.
* i386-opc.tbl (blendvpd): Replace RegKludge with FirstXmm0.
(blendvps): Likewise.
(pblendvb): Likewise.
* i386-tbl.h: Regenerated.
H.J. Lu [Fri, 12 Oct 2007 20:37:58 +0000 (20:37 +0000)]
2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (prefix_table): Reformat pblendvb and blendvps.
Jim Blandy [Fri, 12 Oct 2007 20:14:57 +0000 (20:14 +0000)] 
* serial.h (struct serial_ops): Document read_prim to return zero
at EOF.
* ser-base.c (do_ser_base_readchar): Return SERIAL_EOF when
read_prim returns zero, not SERIAL_TIMEOUT.
Ian Lance Taylor [Fri, 12 Oct 2007 17:32:20 +0000 (17:32 +0000)]
From Craig Silverstein: expand the TLS test to a second file, to test
IE to LE conversion.
Daniel Jacobowitz [Fri, 12 Oct 2007 17:07:04 +0000 (17:07 +0000)] 
* ld-mips-elf/multi-got-hidden-1.d,
ld-mips-elf/multi-got-hidden-1.s,
ld-mips-elf/multi-got-hidden-2.d,
ld-mips-elf/multi-got-hidden-2.s: New.
* ld-mips-elf/mips-elf.exp: Run multi-got-hidden tests.
Nick Clifton [Fri, 12 Oct 2007 16:36:48 +0000 (16:36 +0000)] 
PR gprof/5147
* configure.in: Add check for fabs() being in libm.
* configure: Regenerate.
Nick Clifton [Fri, 12 Oct 2007 16:28:03 +0000 (16:28 +0000)]
* config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B, AT90PWM3B.
* doc/c-avr.texi: Document new devices.
Nick Clifton [Fri, 12 Oct 2007 16:25:21 +0000 (16:25 +0000)]
PR 5160
* elflink.c (eval_symbol): Remove bufsz variable and use sizeof(symbuf) where necessary.
Ulrich Weigand [Fri, 12 Oct 2007 16:13:20 +0000 (16:13 +0000)]
* alpha-mdebug-tdep.c: Include "gdb_string.h".
(find_proc_desc): Add fix-up code for setjmp procedure descriptor.
* mdebugread.c (parse_procedure): Remove setjmp fix-up code.
* Makefile.in (alpha-mdebug-tdep.o): Update dependencies.
* config/alpha/alpha.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/alpha-linux.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/alpha-osf1.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/fbsd.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/tm-alpha.h: Remove file.
Ulrich Weigand [Fri, 12 Oct 2007 16:11:12 +0000 (16:11 +0000)]
* breakpoint.c (breakpoint_sals_to_pc): Do not check for
DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE.
* config/pa/tm-hppa.h: Delete file.
* config/pa/hppa64.mt: Do not set DEPRECATED_TM_FILE.
* config/pa/hppahpux.mt: Likewise.
* config/pa/hppa.mt: Likewise.
* config/pa/linux.mt: Likewise.
* hppa-tdep.c (hppa_pc_requires_run_before_use): Delete.
Nick Clifton [Fri, 12 Oct 2007 16:11:02 +0000 (16:11 +0000)]
* elf32-cr16.c (elf32_cr16_relax_section): Fix condition check typo.
* config/tc-cr16.c: Update the md_relax_table for 1 word b<cc> instruction range information.
Daniel Jacobowitz [Fri, 12 Oct 2007 15:59:19 +0000 (15:59 +0000)]
* elfxx-mips.c (mips_elf_sort_hash_table_f): Handle forced
local symbols specially.
(mips_elf_set_global_got_offset): Skip forced local symbols.
Ulrich Weigand [Fri, 12 Oct 2007 15:49:07 +0000 (15:49 +0000)]
* config/arm/nm-nbsdaout.h: Remove file.
* config/nm-nbsdaout.h: Likewise.
* config/nm-nbsd.h: Likewise.
Ulrich Weigand [Fri, 12 Oct 2007 15:34:45 +0000 (15:34 +0000)]
* block.h (struct block): Remove "gcc_compile_flag" member.
(BLOCK_GCC_COMPILED): Remove.
* block.c (allocate_block): Do not clear BLOCK_GCC_COMPILED.
* buildsym.c (finish_block): Do not set it.
* symmisc.c (dump_symtab_1): Do not dump it.
* value.h (using_struct_return): Remove "gcc_p" argument.
* value.c (using_struct_return): Likewise.
* eval.c (evaluate_subexp_standard): Adapt callers.
* infcall.c (call_function_by_hand): Likewise.
* stack.c (return_command): Likewise.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.
* gdbarch.sh (push_dummy_code): Remove "using_gcc" parameter.
* gdbarch.c, gdbarch.h: Regenerate.
* cris-tdep.c (cris_push_dummy_code): Adapt prototype.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.
* infcall.c (generic_push_dummy_code, push_dummy_code): Likewise.
(push_dummy_code, call_function_by_hand): Adapt callers.
Ulrich Weigand [Fri, 12 Oct 2007 15:32:50 +0000 (15:32 +0000)]
* infcmd.c (print_return_value): Remove STRUCT_RETURN argument.
(finish_command_continuation, finish_command): Adapt callers.
Ulrich Weigand [Fri, 12 Oct 2007 15:31:42 +0000 (15:31 +0000)]
* infcall.c (call_function_by_hand): Remove special handling
for HP aCC compiled code.
Ulrich Weigand [Fri, 12 Oct 2007 15:30:05 +0000 (15:30 +0000)]
* cris-tdep.c (cris_push_dummy_call): Support arguments passed by
reference. Fix endianness bugs.
(cris_reg_struct_has_address): Remove.
(cris_gdbarch_init): Remove set_gdbarch_deprecated_reg_struct_has_addr
and set_gdbarch_deprecated_use_struct_convention calls.
* gdbarch.sh (deprecated_reg_struct_has_addr): Remove.
* gdbarch.c, gdbarch.h: Regenerate.
* infcall.c (call_function_by_hand): Remove handling of
deprecated_reg_struct_has_addr.
doc/ChangeLog:
* gdbint.texi (Target Conditionals): Remove documentation of
and references to DEPRECATED_REG_STRUCT_HAS_ADDR.
Daniel Jacobowitz [Fri, 12 Oct 2007 14:00:31 +0000 (14:00 +0000)]
* doc/as.texinfo (Object Attributes): New chapter.
(Pseudo Ops): Document .gnu_attribute.
(LNS directives): Correct .loc_mark_labels documentation.
Ian Lance Taylor [Fri, 12 Oct 2007 06:06:34 +0000 (06:06 +0000)]
Add an option for Stringpools to not copy strings.
Ian Lance Taylor [Fri, 12 Oct 2007 06:00:55 +0000 (06:00 +0000)]
From Craig Silverstein: improve x86_64 TLS support.
Ian Lance Taylor [Fri, 12 Oct 2007 05:51:25 +0000 (05:51 +0000)]
Add --stats option to print runtime and memory usage statistics.
Alan Modra [Fri, 12 Oct 2007 04:38:29 +0000 (04:38 +0000)]
* ld-srec/srec.exp: Define __stack_chk_fail sym.
Alan Modra [Fri, 12 Oct 2007 03:34:45 +0000 (03:34 +0000)]
* elf.c (elfcore_grok_prxfpreg): Fix comment typo.
Alan Modra [Fri, 12 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Fri, 12 Oct 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Daniel Jacobowitz [Thu, 11 Oct 2007 20:32:36 +0000 (20:32 +0000)]
* Makefile.def (dependencies): Add all-gdb -> all-libdecnumber.
* Makefile.in: Regenerate.
Nick Clifton [Thu, 11 Oct 2007 20:20:55 +0000 (20:20 +0000)]
* config/obj-elf.c (obj_elf_section): When pushing a section, if there is a
comma then the following argument must be a subsection number.
* testsuite/gas/elf/elf.exp (run_elf_list_test): Run section6 test.
* testsuite/gas/elf/section6.s: New file: Check behaviour of .pushsection with a subsection argument.
* testsuite/gas/elf/section6.d: New file: Expected disassembly.
Kazu Hirata [Thu, 11 Oct 2007 20:19:37 +0000 (20:19 +0000)] 
* breakpoint.c (do_enable_breakpoint): Delay enabling until after
checking watchpoint resources.
Kazu Hirata [Thu, 11 Oct 2007 20:12:04 +0000 (20:12 +0000)]
gdb/
* memattr.c (inaccessible_by_default): Change the initial
value to 1.
gdb/doc/
* gdb.texinfo: Mention that inaccessible-by-default is on by
default.
Kazu Hirata [Thu, 11 Oct 2007 20:08:01 +0000 (20:08 +0000)]
* lib/gdb.exp (gdb_load_cmd): Print out $loadtimeout instead
of $timeout.
Daniel Jacobowitz [Thu, 11 Oct 2007 19:48:02 +0000 (19:48 +0000)]
PR gdb/2280
* coffread.c (read_one_sym): Check for read errors.
Ulrich Weigand [Thu, 11 Oct 2007 19:35:29 +0000 (19:35 +0000)]
* linux-nat.c (lin_lwp_attach_lwp): Use "Linux kernel 2.6.19"
instead of "Linux 2.6.19" in comment.
(linux_xfer_partial): Use "GNU/Linux target" instead of
"Linux target" in comment.
* m68klinux-tdep.c (m68k_linux_inferior_created): Likewise.
(m68k_linux_get_sigtramp_info): Likewise.
Ian Lance Taylor [Thu, 11 Oct 2007 19:13:02 +0000 (19:13 +0000)]
From Andrew Chatham: exit on relocation error.
Daniel Jacobowitz [Thu, 11 Oct 2007 19:08:53 +0000 (19:08 +0000)]
* MAINTAINERS (language support): List Joel and Paul as
Ada maintainers.
Daniel Jacobowitz [Thu, 11 Oct 2007 19:01:43 +0000 (19:01 +0000)]
* dbxread.c (process_one_symbol): Remove VARIABLES_INSIDE_BLOCK
checks.
* config/arm/embed.mt, config/arm/linux.mt, config/arm/wince.mt: Do
not set DEPRECATED_TM_FILE.
* config/arm/tm-arm.h: Delete file.
* gdbint.texinfo (Target Conditionals): Remove VARIABLES_INSIDE_BLOCK.
Luis Machado [Thu, 11 Oct 2007 18:48:43 +0000 (18:48 +0000)] 
* MAINTAINERS (Write After Approval): Add self.
Daniel Jacobowitz [Thu, 11 Oct 2007 18:44:07 +0000 (18:44 +0000)]
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* callback.c (cb_is_stdin, cb_is_stdout, cb_is_stderr): Add functions.
* syscall.c (cb_syscall): Test for stdin/out/err, not just fd 0/1/2.
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* callback.h (cb_is_stdin, cb_is_stdout, cb_is_stderr): Add prototypes.
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* sim/cris/c/freopen2.c: Added testcase.
Daniel Jacobowitz [Thu, 11 Oct 2007 18:40:29 +0000 (18:40 +0000)]
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* callback.c (cb_is_stdin): Add.
* syscall.c (cb_syscall): Test for stdin, not just fd 0.
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* callback.h (cb_is_stdin): Add prototype.
Daniel Jacobowitz [Thu, 11 Oct 2007 18:15:02 +0000 (18:15 +0000)]
* src-release (GDB_SUPPORT_DIRS): Add libdecnumber.
* libdecnumber: New directory, imported from GCC.
Daniel Jacobowitz [Thu, 11 Oct 2007 17:38:59 +0000 (17:38 +0000)]
* buildsym.c (record_line): Remove empty lines followed by
end-of-sequence markers.
Nick Clifton [Thu, 11 Oct 2007 15:18:40 +0000 (15:18 +0000)]
PR gas/5161
* config/tc-ia64.c: Allow for translations of error and warning messages.
* po/gas.pot: Regenerate.
Kazu Hirata [Thu, 11 Oct 2007 14:36:37 +0000 (14:36 +0000)]
* configure.tgt: Recognize fido-*-elf.
Nick Clifton [Thu, 11 Oct 2007 14:17:44 +0000 (14:17 +0000)]
PR gas/5158
* config/tc-h8300.c (tc_gen_reloc): Allow for translation of error message.
* po/gas.pot: Regenerate.
H.J. Lu [Thu, 11 Oct 2007 14:08:47 +0000 (14:08 +0000)]
2007-10-11 H.J. Lu <hongjiu.lu@intel.com>
* doc/c-i386.texi: Update which instruction's operands are
swapped.
Nick Clifton [Thu, 11 Oct 2007 13:48:39 +0000 (13:48 +0000)]
PR gas/5155
* config/tc-msp430.c: Fix spelling typos.
Nick Clifton [Thu, 11 Oct 2007 10:37:30 +0000 (10:37 +0000)]
* doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
H.J. Lu [Thu, 11 Oct 2007 05:03:07 +0000 (05:03 +0000)]
2007-10-10 H.J. Lu <hongjiu.lu@intel.com>
* elf.c (get_program_header_size): Always add a PT_GNU_RELRO
segment for -z relro.
(_bfd_elf_map_sections_to_segments): Make a PT_GNU_RELRO
segment only when needed.
gdbadmin [Thu, 11 Oct 2007 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 11 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
H.J. Lu [Wed, 10 Oct 2007 22:00:24 +0000 (22:00 +0000)]
Remove extra white space.
Jim Blandy [Wed, 10 Oct 2007 19:44:30 +0000 (19:44 +0000)]
* dwarf.c (process_debug_info): Line up section offsets of
attribute values with those of dies.
(read_and_display_attr): Reduce spacing here.
Jim Blandy [Wed, 10 Oct 2007 19:43:43 +0000 (19:43 +0000)]
* dwarf.c (display_debug_lines): Print the offset of each line
number program header.
Ian Lance Taylor [Wed, 10 Oct 2007 19:30:39 +0000 (19:30 +0000)]
From Craig Silverstein: don't permit -s and -r.
gdbadmin [Wed, 10 Oct 2007 19:13:49 +0000 (19:13 +0000)]
Add entry for gdb-6.7 release.
Ian Lance Taylor [Wed, 10 Oct 2007 19:02:56 +0000 (19:02 +0000)]
Implement -s and -S options which strip symbols.
Ulrich Weigand [Wed, 10 Oct 2007 17:07:25 +0000 (17:07 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* stack.c (print_frame_args, frame_info, return_command): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
Ulrich Weigand [Wed, 10 Oct 2007 17:06:30 +0000 (17:06 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* rs6000-nat.c (fetch_register, store_register)
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers): Use
get_regcache_arch to get at the current architecture by regcache.
* rs6000-tdep.c (rs6000_push_dummy_call, rs6000_return_value)
(rs6000_register_reggroup_p, e500_move_ev_registe, rs6000_unwind_pc)
(rs6000_unwind_dummy_id, rs6000_frame_cache, rs6000_dump_tdep): Replace
current_gdbarch by gdbarch.
(rs6000_skip_trampoline_code, rs6000_register_to_value)
(rs6000_value_to_register): Use get_frame_arch to get at the current
architecture by frame_info.
Ulrich Weigand [Wed, 10 Oct 2007 17:05:31 +0000 (17:05 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* sparc-tdep.c (sparc_supply_rwindow, sparc_collect_rwindow): Use
get_regcache_arch to get at the current architecture by regcache.
* sparc64-tdep.c (sparc64_supply_gregset, sparc64_collect_gregset)
(sparc64_supply_fpregset, sparc64_collect_fpregset): Use
get_regcache_arch to get at the current architecture by regcache.
* sparc64nbsd-nat. (sparc64nbsd_supply_gregset)
(sparc64nbsd_collect_gregset, sparc64nbsd_supply_fpregset)
(sparc64nbsd_collect_fpregset): Use get_regcache_arch to get at the
current architecture by regcache.
Ulrich Weigand [Wed, 10 Oct 2007 17:04:38 +0000 (17:04 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* remote-mips.c (mips_wait, mips_fetch_registers)
(mips_store_registers): Use get_regcache_arch to get at the
current architecture by regcache.
* mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_fill_reg)
(mipsnbsd_supply_fpreg, mipsnbsd_fill_fpreg): Use get_regcache_arch to
get at the current architecture by regcache.
(mipsnbsd_sigtramp_offset): Use get_frame_arch to get at the current
architecture by frame_info.
* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Use get_regcache_arch to get at
the current architecture by regcache.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips64_linux_get_longjmp_target, mips_linux_o32_sigframe_init)
(mips_linux_n32n64_sigframe_init): Use get_frame_arch to get at the
current architecture by frame_info.
(supply_32bit_reg, mips_supply_gregset, mips_fill_gregset)
(mips_supply_fpregset, mips_fill_fpregset, supply_64bit_reg)
(mips64_supply_gregset, mips64_fill_gregset, mips64_supply_fpregset)
(mips64_fill_fpregset, mips_linux_write_pc): Use get_regcache_arch to
get at the current architecture by regcache.
* mips-linux-nat.c (mips_linux_register_addr)
(mips64_linux_register_addr): Replace current_gdbarch by gdbarch.
(supply_gregset, fill_gregset, supply_fpregset, fill_fpregset)
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers): Use get_regcache_arch to get at
the current architecture by regcache.
* mips64obsd-tdep.c (mips64obsd_sigframe_init): Use get_frame_arch to
get at the current architecture by frame_info.
Ulrich Weigand [Wed, 10 Oct 2007 17:03:36 +0000 (17:03 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* mips-tdep.c (mips_xfer_register): Use get_regcache_arch to get at the
current architecture by regcache.
(mips2_fp_compat, mips32_next_pc, mips16_scan_prologue)
(mips_insn16_frame_cache, mips32_scan_prologue, mips_insn32_frame_cache)
(mips_stub_frame_cache, mips_read_fp_register_single)
(mips_read_fp_register_double, mips_print_fp_register)
(mips_print_register, print_gp_register_row): Use get_frame_arch to get
at the current architecture by frame_info.
(mips_register_reggroup_p, mips_pseudo_register_read, mips_unwind_sp)
(mips_pseudo_register_write, mips_register_type, mips_unwind_pc)
(mips_unwind_dummy_id, mips_eabi_push_dummy_call)
(mips_n32n64_push_dummy_call, mips_n32n64_return_value)
(mips_o32_push_dummy_call, mips_o32_return_value)
(mips_o64_push_dummy_call, mips_o64_return_value)
(mips_print_registers_info, mips_dump_tdep): Replace current_gdbarch by
gdbarch.
Ulrich Weigand [Wed, 10 Oct 2007 17:01:10 +0000 (17:01 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* xtensa-tdep.c (xtensa_register_type, xtensa_pseudo_register_read)
(xtensa_pseudo_register_write, xtensa_register_reggroup_p)
(xtensa_unwind_pc, xtensa_unwind_dummy_id, xtensa_push_dummy_call)
(xtensa_dump_tdep): Replace current_gdbarch by gdbarch.
(xtensa_register_write_masked, xtensa_register_read_masked)
(xtensa_supply_gregset, xtensa_store_return_value)
(xtensa_extract_return_value): Use get_regcache_arch to get at the
current architecture by regcache.
(xtensa_frame_cache, call0_frame_get_reg_at_entry, call0_frame_cache)
(xtensa_frame_prev_register): Use get_frame_arch to get at the current
architecture by frame_info.
H.J. Lu [Wed, 10 Oct 2007 16:25:02 +0000 (16:25 +0000)]
2007-10-10 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (v_mode): Defined as previous one + 1.
(w_mode): Likewise.
(d_mode): Likewise.
(q_mode): Likewise.
(t_mode): Likewise.
(x_mode): Likewise.
(m_mode): Likewise.
(cond_jump_mode): Likewise.
(loop_jcxz_mode): Likewise.
(dq_mode): Likewise.
(dqw_mode): Likewise.
(f_mode): Likewise.
(const_1_mode): Likewise.
(stack_v_mode): Likewise.
(z_mode): Likewise.
(o_mode): Likewise.
(dqb_mode): Likewise.
(dqd_mode): Likewise.
(es_reg): Likewise.
(cs_reg): Likewise.
(ss_reg): Likewise.
(ds_reg): Likewise.
(fs_reg): Likewise.
(gs_reg): Likewise.
(eAX_reg): Likewise.
(eCX_reg): Likewise.
(eDX_reg): Likewise.
(eBX_reg): Likewise.
(eSP_reg): Likewise.
(eBP_reg): Likewise.
(eSI_reg): Likewise.
(eDI_reg): Likewise.
(al_reg): Likewise.
(cl_reg): Likewise.
(dl_reg): Likewise.
(bl_reg): Likewise.
(ah_reg): Likewise.
(ch_reg): Likewise.
(dh_reg): Likewise.
(bh_reg): Likewise.
(ax_reg): Likewise.
(cx_reg): Likewise.
(dx_reg): Likewise.
(bx_reg): Likewise.
(sp_reg): Likewise.
(bp_reg): Likewise.
(si_reg): Likewise.
(di_reg): Likewise.
(rAX_reg): Likewise.
(rCX_reg): Likewise.
(rDX_reg): Likewise.
(rBX_reg): Likewise.
(rSP_reg): Likewise.
(rBP_reg): Likewise.
(rSI_reg): Likewise.
(rDI_reg): Likewise.
(z_mode_ax_reg): Likewise.
(indir_dx_reg): Likewise.
(DREX_OC1): Updated.
(DREX_NO_OC0): Likewise.
(DREX_MASK): Likewise.
(MAX_BYTEMODE): New. Issue an error if MAX_BYTEMODE is not
less than DREX_OC1.
Daniel Jacobowitz [Wed, 10 Oct 2007 14:04:53 +0000 (14:04 +0000)]
* arm-tdep.c (struct arm_prologue_cache): Remove frameoffset.
(thumb_analyze_prologue): Move pv_area_store_would_trash call
out of loop. Do not set cache->frameoffset.
(arm_scan_prologue): Use prologue-value mechanism. Do not set
frameoffset. Simplify framesize.
(arm_make_prologue_cache, arm_normal_frame_base): Do not use
frameoffset.
* arm-tdep.h (enum gdb_regnum): Add ARM_IP_REGNUM.
Daniel Jacobowitz [Wed, 10 Oct 2007 13:28:43 +0000 (13:28 +0000)]
* target.c (update_current_target): Call setup_target_debug.
(push_target): Do not call it here.
Ian Lance Taylor [Wed, 10 Oct 2007 06:33:56 +0000 (06:33 +0000)]
From Craig Silverstein: don't get confused if the same file name
occurs in an archive.
Ian Lance Taylor [Wed, 10 Oct 2007 06:29:10 +0000 (06:29 +0000)]
From Craig Silverstein: delete the output file first if it exists and
is non-empty.
Alan Modra [Wed, 10 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 10 Oct 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Michael Snyder [Tue, 9 Oct 2007 23:28:13 +0000 (23:28 +0000)] 
2007-10-09 Michael Snyder <msnyder@specifix.com>
* MAINTAINERS: Update my email address.
Ian Lance Taylor [Tue, 9 Oct 2007 21:37:55 +0000 (21:37 +0000)]
Create a note section with the version of gold.
Ulrich Weigand [Tue, 9 Oct 2007 19:54:04 +0000 (19:54 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* xtensa-tdep.c: Replace following current-gdbarch based macros by
their expression:
(xtensa_pseudo_register_read)
(xtensa_pseudo_register_write): XTENSA_TARGET_FLAGS.
(ARG_NOF, ARG_1ST, xtensa_extract_return_value)
(xtensa_store_return_value, xtensa_push_dummy_call): CALL_ABI.
(xtensa_pseudo_register_read)
(xtensa_pseudo_register_write): ISA_USE_WINDOWED_REGISTERS.
(xtensa_breakpoint_from_pc): ISA_USE_DENSITY_INSTRUCTIONS.
(xtensa_register_type, xtensa_supply_gregset, xtensa_frame_cache)
(xtensa_frame_prev_register): NUM_AREGS.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write,
(xtensa_supply_gregset, xtensa_frame_cache, xtensa_frame_prev_register,
(xtensa_extract_return_value, xtensa_store_return_value): WB_REGNUM.
(xtensa_supply_gregset, xtensa_frame_cache)
(xtensa_frame_prev_register): WS_REGNUM.
(xtensa_supply_gregset): LBEG_REGNUM, LEND_REGNUM, LCOUNT_REGNUM,
SAR_REGNUM, EXCCAUSE_REGNUM, EXCVADDR_REGNUM
(xtensa_register_name, xtensa_register_type, xtensa_reg_to_regnum)
(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_register_reggroup_p): REGMAP.
(call0_track_op): LITBASE_REGNUM.
(xtensa_register_type, xtensa_reg_to_regnum, call0_frame_cache):A0_BASE
(xtensa_supply_gregset, call0_frame_get_reg_at_entry)
(xtensa_frame_prev_register, AREG_NUMBER)
(xtensa_register_type): AR_BASE.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write): FP_ALIAS.
(AREG_NUMBER): AREGS_MASK, WB_MASK, A0_REGNUM.
(ARG_1ST, xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_frame_cache, xtensa_frame_prev_register)
(xtensa_extract_return_value, xtensa_store_return_value)
(xtensa_push_dummy_call, call0_frame_cache): A0_REGNUM.
(xtensa_register_type, xtensa_pseudo_register_read, xtensa_frame_cache)
(xtensa_pseudo_register_write, xtensa_unwind_dummy_id)
(xtensa_frame_prev_register, xtensa_push_dummy_call)
(call0_frame_cache): A1_REGNUM.
(xtensa_extract_return_value, xtensa_store_return_value): A2_REGNUM.
(xtensa_push_dummy_call): A4_REGNUM.
(ARGS_FIRST_REG): A6_REGNUM.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_frame_prev_register): A15_REGNUM.
* xtensa-tdep.h: Delete current_gdbarch based macros after replacing
them in the appropriate source file:
XTENSA_TARGET_FLAGS, SPILL_LOCATION, SPILL_SIZE, CALL_ABI, NUM_AREGS,
ISA_USE_WINDOWED_REGISTERS, ISA_USE_DENSITY_INSTRUCTIONS, WB_REGNUM,
ISA_USE_EXCEPTIONS, ISA_USE_EXT_L32R, DEBUG_DATA_VADDR_TRAP_COUNT,
DEBUG_INST_VADDR_TRAP_COUNT, ISA_MAX_INSN_SIZE, DEBUG_NUM_IBREAKS,
DEBUG_NUM_DBREAKS, WS_REGNUM, LBEG_REGNUM, LEND_REGNUM, SAR_REGNUM,
REGMAP, LITBASE_REGNUM, DEBUGCAUSE_REGNUM, EXCCAUSE_REGNUM, AR_BASE,
EXCVADDR_REGNUM, NUM_IBREAKS, REGMAP_BYTES, NUM_CONTEXTS, FP_ALIAS,
FP_LAYOUT, FP_LAYOUT_BYTES, GREGMAP, AREGS_MASK, WB_MASK, A0_REGNUM,
A1_REGNUM, A2_REGNUM, A3_REGNUM, A4_REGNUM, A5_REGNUM, A6_REGNUM,
A7_REGNUM, A8_REGNUM, A9_REGNUM, A10_REGNUM, A11_REGNUM, A12_REGNUM,
A13_REGNUM, A14_REGNUM, A15_REGNUM.
Ulrich Weigand [Tue, 9 Oct 2007 18:19:47 +0000 (18:19 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* h8300-tdep.c (h8300_frame_cache): Use get_frame_arch to get at
the current architecture by frame_info.
(h8300_frame_prev_register
(h8300_print_register): Replace current_gdbarch by gdbarch.
(h8300_print_registers_info, h8300_register_type)
(h8300_register_type): Likewise.
Ulrich Weigand [Tue, 9 Oct 2007 18:18:50 +0000 (18:18 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* i386-linux-nat.c (fetch_register): Use get_regcache_arch to get at
the current architecture by regcache.
(store_register, supply_gregset, fill_gregset, i386_linux_resume)
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers): Likewise.
* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Likewise.
* i386-nto-tdep.c (i386nto_supply_gregset): Likewise.
* i386v4-nat.c (supply_fpregset, fill_fpregset): Likewise.
* i386-tdep.c (i386_unwind_pc): Replace current_gdbarch by gdbarch.
(i386_extract_return_value, i386_store_return_value): Likewise.
* i386-tdep.c (i386_frame_prev_register): Use get_frame_arch to get at
the current architecture by frame_info.
(i386_sigtramp_frame_cache, i386_get_longjmp_target)
(i386_register_to_value, i386_value_to_register): Likewise.
Ulrich Weigand [Tue, 9 Oct 2007 18:17:31 +0000 (18:17 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* monitor.c (monitor_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
(monitor_store_register, monitor_store_registers): Likewise.
Ulrich Weigand [Tue, 9 Oct 2007 18:16:00 +0000 (18:16 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* dbug-rom.c (dbug_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
Ulrich Weigand [Tue, 9 Oct 2007 18:15:04 +0000 (18:15 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* arch-utils.c (legacy_return_value): Replace current_gdbarch by
gdbarch.
Ulrich Weigand [Tue, 9 Oct 2007 18:14:09 +0000 (18:14 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* frame.c (frame_pc_unwind): Use get_frame_arch to get at the current
architecture by frame.
(frame_save_as_regcache, frame_register_unwind, get_prev_frame_1)
(inside_main_func, frame_sp_unwind): Likewise.
Daniel Jacobowitz [Tue, 9 Oct 2007 17:59:01 +0000 (17:59 +0000)]
* solib-svr4.c (enable_break): Add the dynamic linker also if
auxv succeeds.
* gdb.server/server-run.exp: Test for dynamic linker symbols.
Ian Lance Taylor [Tue, 9 Oct 2007 17:46:15 +0000 (17:46 +0000)]
Fix soname for library found in search path.
Carlos Eduardo Seo [Tue, 9 Oct 2007 16:03:07 +0000 (16:03 +0000)] 
* MAINTAINERS (Write After Approval): Add self.
Pierre Muller [Tue, 9 Oct 2007 15:08:02 +0000 (15:08 +0000)] 
2007/10/09 Pierre Muller <muller@ics.u-strasbg.fr>
* lib/gdb.exp (gdb_run_cmd): Move comment outside
of gdb_expect call, to avoid interruption.
H.J. Lu [Tue, 9 Oct 2007 13:32:50 +0000 (13:32 +0000)]
binutils/
2007-10-09 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4476
* readelf.c (print_dynamic_symbol): New.
(process_symbol_table): Handle DT_GNU_HASH for dynamic symbols.
ld/testsuite/
2007-10-09 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4476
* ld-elf/hash.d: Check "-s -D" for readelf.
Pedro Alves [Tue, 9 Oct 2007 09:05:53 +0000 (09:05 +0000)] 
* stabsread.c (read_huge_number): Initialize local variable to 0.
Pierre Muller [Tue, 9 Oct 2007 06:59:27 +0000 (06:59 +0000)]
2007-10-09 Pierre Muller <muller@ics.u-strasbg.fr>
* p-lang.h (pascal_main_name): Add declaration.
* p-lang.c (GPC_P_INITIALIZE, GPC_MAIN_PROGRAM_NAME_1)
(GPC_MAIN_PROGRAM_NAME_2): New constants.
(pascal_main_name): New function.
* symtab.c: Include p-lang.h.
(find_main_name): Add call to pascal_main_name.
* Makefile.in (symtab.o): Add dependency on p-lang.h.
Carlos O'Donell [Tue, 9 Oct 2007 02:17:23 +0000 (02:17 +0000)] 
*** empty log message ***
Alan Modra [Tue, 9 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Tue, 9 Oct 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Pedro Alves [Mon, 8 Oct 2007 23:15:55 +0000 (23:15 +0000)]
2007-10-09 Pedro Alves <pedro_alves@portugalmail.pt>
* gdb.base/whatis.c (v_long_long, v_signed_long_long)
(v_unsigned_long_long, v_long_long_array)
(v_signed_long_long_array, v_unsigned_long_long_array)
(slong_long_addr, a_slong_long_addr, v_long_long_pointer)
(v_signed_long_long_pointer, v_unsigned_long_long_pointer)
[!NO_LONG_LONG]: New.
(t_struct, v_struct2, t_union, v_union2) [!NO_LONG_LONG]: Add
v_long_long_member.
(v_long_long_func, v_signed_long_long_func)
(v_unsigned_long_long_func) [!NO_LONG_LONG]: New.
(main) [!NO_LONG_LONG]: Initialize long long variants.
* gdb.base/whatis.exp: If board file requests no_long_long, build
test with NO_LONG_LONG defined. Test long long, signed long long,
and unsigned long long variants but only if board file doesn't
disable it.
Pedro Alves [Mon, 8 Oct 2007 23:06:20 +0000 (23:06 +0000)]
2007-10-09 Pedro Alves <pedro_alves@portugalmail.pt>
* stabsread.c (read_huge_number): Fix handling of octal
representation when the bit width is known.
(read_range_type): Record unsigned integral types with their size,
when the type size is known.
Thiago Jung Bauermann [Mon, 8 Oct 2007 19:37:07 +0000 (19:37 +0000)] 
2007-10-08 Thiago Jung Bauermann <bauerman@br.ibm.com>
* MAINTAINERS (Write After Approval): Add self.
Thiago Jung Bauermann [Mon, 8 Oct 2007 19:31:48 +0000 (19:31 +0000)]
* MAINTAINERS (Write After Approval): Add self.
This page took 0.04059 seconds and 4 git commands to generate.
projects / deliverable / binutils-gdb.git / log
