Tom Tromey [Thu, 19 May 2016 03:19:17 +0000 (21:19 -0600)]
Fix PR python/19438, PR python/18393 - initialize dictionaries
This fixes PR python/19438 and PR python/18393. Both bugs are about
invoking dir() on some Python object implemented by gdb, and getting a
crash.
The crash happens because the dictionary field of these objects was
not initialized. Apparently what happens is that this field can be
lazily initialized by Python when assigning to an attribute; and it
can also be handled ok when using dir() but without __dict__ defined;
but gdb defines __dict__ because this isn't supplied automatically by
Python.
The docs on this seem rather sparse, but this patch works ok.
An alternative might be to lazily create the dictionary in
gdb_py_generic_dict, but I went with this approach because it seemed
more straightforward.
Built and regtested on x86-64 Fedora 23.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/19438, PR python/18393:
* python/py-objfile.c (objfpy_initialize): Initialize self->dict.
* python/py-progspace.c (pspy_initialize): Initialize self->dict.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/19438, PR python/18393:
* gdb.python/py-progspace.exp: Add "dir" test.
* gdb.python/py-objfile.exp: Add "dir" test.
Claudiu Zissulescu [Thu, 19 May 2016 10:19:32 +0000 (12:19 +0200)]
[ARC] Update instruction type and delay slot info.
This patch corrects the instructioninformation passed into the
disassebler_info structure.
include/
2016-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (insn_subclass_t): Add COND.
(flag_class_t): Add F_CLASS_EXTEND.
opcodes/
2016-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_flags): Set branch_delay_insns, and insn_type
information.
(print_insn_arc): Set insn_type information.
* arc-opc.c (C_CC): Add F_CLASS_COND.
* arc-tbl.h (bbit0, bbit1): Update subclass to COND.
(beq_s, bge_s, bgt_s, bhi_s, bhs_s): Likewise.
(ble_s, blo_s, bls_s, blt_s, bne_s): Likewise.
(breq, breq_s, brge, brhs, brlo, brlt): Likewise.
(brne, brne_s, jeq_s, jne_s): Likewise.
Claudiu Zissulescu [Thu, 19 May 2016 10:33:17 +0000 (12:33 +0200)]
[ARC] Add XY registers, update neg instruction.
gas/
2016-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (md_begin): Add XY registers.
(cpu_types): Code density is default off for ARC EM.
opcodes/
2016-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* arc-tbl.h (neg): New instruction variant.
Claudiu Zissulescu [Mon, 23 May 2016 15:25:46 +0000 (17:25 +0200)]
[ARC] Rename "class" named attributes.
gas/
2016-05-23 Cupertino Miranda <cmiranda@synopsys.com>
* config/tc-arc.c (attributes_t): Renamed attribute class to
attr_class.
(find_opcode_match, assemble_insn, tokenize_extinsn): Changed.
opcode/
2016-05-23 Cupertino Miranda <cmiranda@synopsys.com>
* arc-dis.c (find_format, find_format, get_auxreg)
(print_insn_arc): Changed.
* arc-ext.h (INSERT_XOP): Likewise.
include/
2016-05-23 Cupertino Miranda <cmiranda@synopsys.com>
* opcode/arc.h (struct arc_opcode): Renamed attribute class to
insn_class.
(struct arc_flag_class): Renamed attribute class to flag_class.
Yao Qi [Mon, 23 May 2016 14:45:12 +0000 (15:45 +0100)]
Use standard_testfile in gdb.arch/thumb-prologue.exp and gdb.arch/thumb2-it.exp
This patch fixes the errors below:
Running /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.arch/thumb-prologue.exp ...
gdb compile failed, arm-linux-gnueabihf/bin/ld: cannot open output file /scratch/yao/gdb/build-git/arm-linux-gnueabihf/gdb/testsuite/gdb.arch/thumb-prologue: No such file or directory
collect2: error: ld returned 1 exit status
Running /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.arch/thumb2-it.exp ...
gdb compile failed, arm-linux-gnueabihf/bin/ld: cannot open output file /scratch/yao/gdb/build-git/arm-linux-gnueabihf/gdb/testsuite/gdb.arch/thumb2-it: No such file or directory
gdb/testsuite:
2016-05-23 Yao Qi <yao.qi@linaro.org>
* gdb.arch/thumb-prologue.exp: Use standard_testfile.
* gdb.arch/thumb2-it.exp: Likewise.
Nick Clifton [Mon, 23 May 2016 12:56:46 +0000 (13:56 +0100)]
oops - omitted from previous delta
Kuba Sejdak [Mon, 23 May 2016 12:53:07 +0000 (13:53 +0100)]
Add support for configuring for the ARM Phoenix target.
bfd * config.bfd: Add entry for arm-phoenix.
gas * configuse.tgt: Add entry for arm-phoenix.
ld * Makefile.am: Add earmelf_phoenix.c.
* Makefile.in: Regenerate.
* configure.tgt: Add entry for arm-phoenix.
* emulparams/armelf_phoenix.sh: New file.
Gary Benson [Mon, 23 May 2016 12:26:47 +0000 (13:26 +0100)]
Remove unused libthread_db td_thr_validate reference
Native GDB looks up the function td_thr_validate from libthread_db.so
on Linux, but the value is never used. This commit removes this dead
code.
gdb/ChangeLog:
* nat/gdb_thread_db.h (td_thr_validate_ftype): Remove typedef.
* linux-thread-db.c (struct thread_db_info) <td_thr_validate_p>:
Remove field.
(try_thread_db_load_1): Remove td_thr_validate initialization.
Nick Clifton [Mon, 23 May 2016 10:42:17 +0000 (11:42 +0100)]
Sync config.guess and config.sub with FSF GCC mainline versions
Thomas Preud'homme [Mon, 23 May 2016 08:41:36 +0000 (09:41 +0100)]
Support for dedicated ARM stub section with padding
2016-05-23 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (arm_dedicated_stub_section_padding): New function.
(elf32_arm_size_stubs): Declare stub_type in a more outer scope and
account for padding for stub section requiring one.
(elf32_arm_build_stubs): Add comment to stress the importance of
zeroing veneer section content.
Thomas Preud'homme [Mon, 23 May 2016 08:38:32 +0000 (09:38 +0100)]
Support for dedicated output section for some ARM veneer types
2016-05-23 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (bfd_elf32_arm_keep_private_stub_output_sections): Declare
bfd hook.
* bfd-in2.h: Regenerate.
* elf32-arm.c (arm_dedicated_stub_output_section_required): New
function.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_dedicated_stub_output_section_name): Likewise.
(arm_dedicated_stub_input_section_ptr): Likewise.
(elf32_arm_create_or_find_stub_sec): Add stub type parameter and
function description comment. Add support for dedicated output stub
section to given stub types.
(elf32_arm_add_stub): Add a stub type parameter and pass it down to
elf32_arm_create_or_find_stub_sec.
(elf32_arm_create_stub): Pass stub type down to elf32_arm_add_stub.
(elf32_arm_size_stubs): Pass stub type when calling
elf32_arm_create_or_find_stub_sec for Cortex-A8 erratum veneers.
(bfd_elf32_arm_keep_private_stub_output_sections): New function.
ld/
* emultempl/armelf.em (arm_elf_before_allocation): Call
bfd_elf32_arm_keep_private_stub_output_sections before generic
before_allocation function.
Jon Boden [Mon, 23 May 2016 07:46:33 +0000 (08:46 +0100)]
Search for libutil-freebsd as alternative to libutil
GDB needs kinfo_getvmmap() on GNU/kFreeBSD systems same as on
pure FreeBSD. However on these systems the FreeBSD version of libutil
is renamed to libutil-freebsd.
2016-05-23 Jon Boden <jon@ubuntubsd.org>
* configure.ac: Search for libutil-freebsd as alternative to libutil.
* configure: Re-generated.
Trevor Saunders [Thu, 19 May 2016 02:48:34 +0000 (22:48 -0400)]
tic54x: use concat more
gas/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-tic54x.c (tic54x_sect): simplify string creation.
Trevor Saunders [Thu, 19 May 2016 02:39:18 +0000 (22:39 -0400)]
spu: make some constants unsigned
The field in spu_opcode is unsigned, and for some values of opcode we can end
up shifting into the high bit. So avoid possibly creating a negative number
and then assigning it to a unsigned field by shifting an unsigned constant.
gas/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-spu.c (APUOP): Use OPCODE as an unsigned constant.
Trevor Saunders [Thu, 19 May 2016 03:48:48 +0000 (23:48 -0400)]
tic54x: rename typedef of struct symbol_
generic gas code has a struct symbol, and tic54x typedefs a struct to symbol.
This seems at least rather confusing, and it seems like target specific headers
shouldn't put such generic names in the global namespace preventing other
generic code from using them.
opcodes/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* tic54x-dis.c (sprint_mmr): Adjust.
* tic54x-opc.c: Likewise.
gas/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-tic54x.c (tic54x_mmregs): Adjust.
(md_begin): Likewise.
(encode_condition): Likewise.
(encode_cc3): Likewise.
(encode_cc2): Likewise.
(encode_operand): Likewise.
(tic54x_undefined_symbol): Likewise.
include/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* opcode/tic54x.h (struct symbol_): typedef to tic54x_symbol instead of
plain symbol.
GDB Administrator [Mon, 23 May 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 22 May 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 21 May 2016 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Fri, 20 May 2016 16:36:48 +0000 (09:36 -0700)]
Don't check R_386_GOT32 when setting need_convert_load
Since we no longer convert R_386_GOT32, don't check R_386_GOT32 when
setting need_convert_load.
* elf32-i386.c (elf_i386_check_relocs): Don't check R_386_GOT32
when setting need_convert_load.
Matthew Fortune [Fri, 20 May 2016 14:20:42 +0000 (15:20 +0100)]
MIPS: Add support for P6600
gas/
* config/tc-mips.c (mips_cpu_info_table): Update comment. Add
p6600 entry.
* doc/c-mips.texi: Document p6600 -march option.
H.J. Lu [Fri, 20 May 2016 13:01:28 +0000 (06:01 -0700)]
Preserve addend for R_386_GOT32 and R_X86_64_GOT32
We should preserve addend for R_386_GOT32 and R_X86_64_GOT32 as in
"movl $foo@GOT + 4, %eax" and "movq $foo@GOT + 4, %rax".
PR gas/19600
* config/tc-i386.c (md_apply_fix): Preserve addend for
BFD_RELOC_386_GOT32 and BFD_RELOC_X86_64_GOT32.
* testsuite/gas/i386/addend.d: New file.
* testsuite/gas/i386/addend.s: Likewise.
* testsuite/gas/i386/x86-64-addend.d: Likewise.
* testsuite/gas/i386/x86-64-addend.s: Likewise.
* testsuite/gas/i386/i386.exp: Run addend and x86-64-addend.
* testsuite/gas/i386/reloc32.d: Updated.
Maciej W. Rozycki [Fri, 20 May 2016 12:32:19 +0000 (13:32 +0100)]
MIPS: Fix the encoding of immediates with microMIPS JALX
The microMIPS JALX instruction shares the R_MICROMIPS_26_S1 relocation
with microMIPS J/JAL/JALS instructions, however unlike the latters its
encoded immediate argument is unusually shifted left by 2 rather than 1
in calculating the value used for the operation requested.
We already handle this exception in `mips_elf_calculate_relocation' in
LD, in a scenario where JALX is produced as a result of relaxing JAL for
the purpose of making a cross-mode jump. We also get it right in the
disassembler in `decode_micromips_operand'.
What we don't correctly do however is processing microMIPS JALX produced
by GAS from an assembly source, where a non-zero constant argument or a
symbol reference with a non-zero in-place addend has been used. In this
case the same calculation is made as for microMIPS J/JAL/JALS, causing
the wrong encoding to be produced by GAS on making an object file, and
then again by LD in the final link. The latter in particular causes the
calculation, where the addend fits in the relocatable field, to produce
different final addresses for the same source code depending on whether
REL or RELA relocations are used.
Correct these issues by special-casing microMIPS JALX in the places that
have been previously missed.
bfd/
* elfxx-mips.c (mips_elf_read_rel_addend): Adjust the addend for
microMIPS JALX.
gas/
* config/tc-mips.c (append_insn): Correct the encoding of a
constant argument for microMIPS JALX.
(tc_gen_reloc): Correct the encoding of an in-place addend for
microMIPS JALX.
* testsuite/gas/mips/jalx-addend.d: New test.
* testsuite/gas/mips/jalx-addend-n32.d: New test.
* testsuite/gas/mips/jalx-addend-n64.d: New test.
* testsuite/gas/mips/jalx-imm.d: New test.
* testsuite/gas/mips/jalx-imm-n32.d: New test.
* testsuite/gas/mips/jalx-imm-n64.d: New test.
* testsuite/gas/mips/jalx-addend.s: New test source.
* testsuite/gas/mips/jalx-imm.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalx-addend.d: New test.
* testsuite/ld-mips-elf/jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Maciej W. Rozycki [Fri, 20 May 2016 11:41:50 +0000 (12:41 +0100)]
MIPS/GAS: Correct tab-after-space formatting mistakes
* config/tc-mips.c: Correct tab-after-space formatting mistakes
throughout.
GDB Administrator [Fri, 20 May 2016 00:00:10 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Thu, 19 May 2016 21:58:18 +0000 (14:58 -0700)]
Don't allow COPY relocations for protected symbols.
gold/
PR gold/19823
* copy-relocs.cc (Copy_relocs::make_copy_reloc): Add object
parameter; check for protected symbol.
* copy-relocs.h (Copy_relocs::make_copy_reloc): Add object parameter.
* mips.cc (Mips_copy_relocs): Adjust call to make_copy_reloc.
* symtab.cc (Symbol::init_fields): Initialize is_protected_.
(Symbol_table::add_from_dynobj): Mark protected symbols.
* symtab.h (Symbol::is_protected): New method.
(Symbol::set_is_protected): New method.
(Symbol::is_protected_): New data member.
* testsuite/Makefile.am (copy_test_protected): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/copy_test.cc (main): Add legal reference to protected
symbol.
* testsuite/copy_test_v1.cc (main): Likewise.
* testsuite/copy_test_2.cc (ip): Add protected symbol.
* testsuite/copy_test_protected.cc: New test source file.
* testsuite/copy_test_protected.sh: New test script.
Vladimir Radosavljevic [Thu, 19 May 2016 21:57:14 +0000 (14:57 -0700)]
Fix non-deterministic behavior when generating MIPS GOT.
* mips.cc (Mips_got_entry::Mips_got_entry): Remove object argument
for global got symbols, and set addend to 0.
(Mips_got_entry::hash): Change hash algorithm.
(Mips_got_entry::equals): Refactor.
(Mips_got_entry::object): Return input object for local got symbols
from union d.
(Mips_got_entry::addend): Change return of the relocation addend.
(Mips_got_entry::addend_): Move from union d.
(Mips_got_entry::object_): Move into union d.
(class Mips_symbol_hash): New class.
(Mips_got_info::Global_got_entry_set): New type.
(Mips_got_info::global_got_symbols): Change return type to
Global_got_entry_set.
(Mips_got_info::global_got_symbols_): Change type to
Global_got_entry_set.
(Mips_symbol::hash): New method.
(Mips_output_data_la25_stub::symbols_): Change type to std::vector.
(Mips_output_data_mips_stubs::Mips_stubs_entry_set): New type.
(Mips_output_data_mips_stubs::symbols_): Change type to
Mips_stubs_entry_set.
(Mips_got_info::record_global_got_symbol): Don't pass object
argument when creating global got symbol.
(Mips_got_info::record_got_entry): Remove find before inserting
got entries.
(Mips_got_info::add_reloc_only_entries): Change type of iterator
to Global_got_entry_set.
(Mips_got_info::count_got_symbols): Likewise.
(Mips_output_data_la25_stub::create_la25_stub): Use push_back
for adding entries to symbols_.
(Mips_output_data_la25_stub::do_write): Change type of iterator
to std::vector.
(Mips_output_data_mips_stubs::set_lazy_stub_offsets): Change type
of iterator to Mips_stubs_entry_set.
(Mips_output_data_mips_stubs::set_needs_dynsym_value): Likewise.
(Mips_output_data_mips_stubs::do_write): Likewise.
H.J. Lu [Thu, 19 May 2016 19:56:55 +0000 (12:56 -0700)]
Don't convert R_386_GOT32 relocation
Don't convert R_386_GOT32 since we can't tell if it is applied
to "mov $foo@GOT, %reg" which isn't a load via GOT.
bfd/
PR ld/20117
* elf32-i386.c (elf_i386_convert_load_reloc): Don't check
R_386_GOT32X.
(elf_i386_convert_load): Don't convert R_386_GOT32.
ld/
PR ld/20117
* testsuite/ld-i386/i386.exp: Run pr20117.
* testsuite/ld-i386/pr19609-1i.d: Updated.
* testsuite/ld-i386/pr20117.d: New file.
* testsuite/ld-i386/pr20117.s: Likewise.
Alan Modra [Thu, 19 May 2016 15:03:42 +0000 (00:33 +0930)]
Set sh_entsize for .init_array and similar.
PR gas/20118
* elf.c (elf_fake_sections): Set sh_entsize for SHT_INIT_ARRAY,
SHT_FINI_ARRAY, and SHT_PREINIT_ARRAY.
Andreas Schwab [Thu, 19 May 2016 12:43:56 +0000 (14:43 +0200)]
Fix invalid implicit conversions from void *
* ia64-libunwind-tdep.c (libunwind_descr): Add cast from void *.
(libunwind_frame_set_descr): Likewise.
(libunwind_frame_cache): Likewise.
(libunwind_frame_dealloc_cache): Likewise.
(libunwind_frame_sniffer): Likewise.
(libunwind_search_unwind_table): Likewise.
(libunwind_sigtramp_frame_sniffer): Likewise.
(libunwind_get_reg_special): Likewise.
(libunwind_load): Likewise.
* ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
(ia64_linux_store_register): Likewise.
(ia64_linux_xfer_partial): Likewise.
* ia64-tdep.c (ia64_access_reg): Likewise.
(ia64_access_fpreg): Likewise.
(ia64_access_rse_reg): Likewise.
(ia64_access_rse_fpreg): Likewise.
Claudiu Zissulescu [Thu, 19 May 2016 12:51:53 +0000 (14:51 +0200)]
[ARC] Fixed-linker-related-testsuite-for-ARC
ld/
2016-05-19 Cupertino Miranda <cmiranda@synopsys.com>
* testsuite/ld-elf/compressed1d.d: Removed from notarget.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/eh-frame-hdr.d: Removed from xfail.
* testsuite/ld-elf/group3b.d: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/lib/ld-lib.exp (check_gc_sections_available): Mark ARC
as supporting gc.
(check_shared_lib_support): Mark ARC as supporting.
Claudiu Zissulescu [Thu, 19 May 2016 12:44:01 +0000 (14:44 +0200)]
[ARC] Emulation and default script template changes.
2016-05-19 Cupertino Miranda <cmiranda@synopsys.com>
* emulparams/arcelf.sh: Changed.
* emulparams/arclinux.sh: Likewise.
* scripttempl/arclinux.sc: Moved to a more standard implementation
similar to elf.sc.
Claudiu Zissulescu [Thu, 19 May 2016 12:39:36 +0000 (14:39 +0200)]
[ARC] BFD fixes.
2016-05-19 Cupertino Miranda <cmiranda@synopsys.com>
* elf32-arc.c (arc_elf_final_write_processing): Changed.
(debug_arc_reloc): Likewise.
(elf_arc_relocate_section): Likewise.
(elf_arc_check_relocs): Likewise.
(elf_arc_adjust_dynamic_symbol): Likewise.
(elf_arc_add_symbol_hook): Likewise.
Maciej W. Rozycki [Thu, 19 May 2016 10:19:04 +0000 (11:19 +0100)]
LD/testsuite: Fix `ft32-*-*' position in `check_shared_lib_support'
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Reorder
`ft32-*-*' behind `frv-*-*'.
Maciej W. Rozycki [Wed, 18 May 2016 03:19:02 +0000 (04:19 +0100)]
Remove unsupported `am34-*-linux*' target triplet
The `am34-*-linux*' target cannot be configured for, `am34' is not a CPU
name recognized by `config.sub'. It has never been, required code has
not been contributed to GNU config, neither before nor since the
addition of the target triplet to our configury with commit
bfff16424942
("Add MN10300 linker relaxation support for symbol differences") back in
2007. Also there is no difference in actual tool configuration between
the `am34-*-linux*' and `am33_2.0-*-linux*' targets, except from a
different executable prefix and tooldir name.
Given the above remove the target triplet from our configuration.
bfd/
* config.bfd: Remove `am34-*-linux*' support.
ld/
* configure.tgt: Remove `am34-*-linux*' support.
Alan Modra [Thu, 19 May 2016 07:24:54 +0000 (16:54 +0930)]
Correct "Fix powerpc subis range"
* ppc-opc.c (NSISIGNOPT): Use insert_nsi and extract_nsi.
Alan Modra [Wed, 18 May 2016 14:40:35 +0000 (00:10 +0930)]
Fix powerpc subis range
* ppc-opc.c: Formatting.
(NSISIGNOPT): Define.
(powerpc_opcodes <subis>): Use NSISIGNOPT.
Alan Modra [Wed, 18 May 2016 14:40:13 +0000 (00:10 +0930)]
Hack crossref tests for powerpc64
A different set of hacks to make the crossref tests pass on powerpc64
and powerpc64le.
* testsuite/ld-scripts/crossref.exp: Remove -mcall-aixdesc hack.
* testsuite/ld-scripts/cross2.t: Tweak .opd and .toc placement.
* testsuite/ld-scripts/cross3.t: Likewise.
* testsuite/ld-scripts/cross4.t: Likewise.
* testsuite/ld-scripts/cross5.t: Likewise.
* testsuite/ld-scripts/cross6.t: Likewise.
* testsuite/ld-scripts/cross7.t: Likewise.
Alan Modra [Wed, 18 May 2016 14:39:03 +0000 (00:09 +0930)]
ld-elf/shared.exp mix_pic_and_non_pic
Tweaks to make it easier to re-run these testcases by hand.
* testsuite/ld-elf/shared.exp (mix_pic_and_non_pic): Pass in
exe name rather than constructing testname. Fix typo in
sub-test name. Log copying. Use -rpath rather than -R.
Alan Modra [Wed, 18 May 2016 14:29:04 +0000 (23:59 +0930)]
Allocate ppc64 got and dynrelocs before plt
The idea being to make undefined weak syms dynamic, before deciding
whether a sym needs a plt entry. Fixes pr19719 ld testcase.
* elf64-ppc.c (allocate_dynrelocs): Allocate got and other dynamic
relocs before plt relocs.
Alan Modra [Thu, 19 May 2016 03:02:40 +0000 (12:32 +0930)]
Fix ppc64le S-record test fail
Segfaults on --defsym symbol (__stack_chk_fail in this instance).
* elf64-ppc.c (ppc64_elf_branch_reloc): Check for NULL owner
before dereferencing.
GDB Administrator [Thu, 19 May 2016 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Fri, 6 May 2016 12:59:03 +0000 (13:59 +0100)]
gas/arc: Make member of arc_flags const
By making the flgp field of struct arc_flags constant we can remove a
place where we cast away the const-ness of a variable. Also, given that
the value assigned to this field almost always comes from compile-time
constant data, having the field non-constant is probably a bad thing.
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Remove casting away of
const.
* config/tc-arc.h (struct arc_flags): Make flgp field const.
Andrew Burgess [Wed, 4 May 2016 13:11:11 +0000 (14:11 +0100)]
gas/arc: Use BFD_VMA_FMT for printf format specifier
Some debug code has the wrong printf format specifier for some types
that are (ultimately) bfd_vma. Fixed by using BFD_VMA_FMT string. This
only becomes an issue when building the tc-arc.c file with -DDEBUG=1 to
build in the debug code.
gas/ChangeLog:
* config/tc-arc.c (md_pcrel_from_section): Use BFD_VMA_FMT where
appropriate.
(md_convert_frag): Likewise.
Andrew Burgess [Wed, 4 May 2016 12:57:10 +0000 (13:57 +0100)]
gas/arc: Fix array overrun when checking opcode array
The opcode array iterator mechanism can, in some situations, result in
reading memory outside of the opcode array. When using the
iterator-next mechanism to find the next possible arc_opcode, if we find
an opcode where the name field is NULL, or the name does not match, then
the cached opcode pointer is not set to NULL. The result is that
another call to iterator-next will again increment the opcode
pointer (which might now point outside the opcode array) and attempt to
access the name field of this undefined opcode.
Fixed in this commit by clearing the cached opcode pointer.
I've added a test case, which currently shows the bug, however, this
will only expose this bug while the opcode used (dsp_fp_cmp) is the last
opcode in the table.
gas/ChangeLog:
* config/tc-arc.c (arc_opcode_hash_entry_iterator_next): Set
cached opcode to NULL when we reach a non-matching opcode.
* testsuite/gas/arc/asm-errors-2.d: New file.
* testsuite/gas/arc/asm-errors-2.err: New file.
* testsuite/gas/arc/asm-errors-2.s: New file.
Andrew Burgess [Tue, 3 May 2016 12:43:44 +0000 (13:43 +0100)]
gas/arc: Add guard against operand array overflow.
Currently supplying an input file with too many operands to an
instruction will cause the assembler to overflow and array and trigger
undefined behaviour.
This change checks that we don't access outside the limits of the
operand array.
gas/ChangeLog:
* config/tc-arc.c (tokenize_arguments): Add checks for array
overflow.
* testsuite/gas/arc/asm-errors.s: Addition test line added.
* testsuite/gas/arc/asm-errors.err: Update expected results.
Tom Tromey [Wed, 18 May 2016 16:48:41 +0000 (10:48 -0600)]
Fix build failure with GCC 4.1.
2016-05-18 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_subscript): Initialize "high".
Nick Clifton [Wed, 18 May 2016 14:21:16 +0000 (15:21 +0100)]
Prevent a run time segmentation fault when stripping a corrupt binary.
PR 20096
* objcopy.c (copy_relocations_in_section): Also check for the
symbol pointed to by sym_ptr_ptr being NULL.
Simon Marchi [Wed, 18 May 2016 14:13:12 +0000 (10:13 -0400)]
Add mi-threads-interrupt.exp test (PR 20039)
Add a new test for PR 20039. The test spawns new threads, then tries to
interrupt, continue, and interrupt again. This use case was fixed by
commit
5fe966540d6b748f825774868463003700f0c878 in master, but gdb 7.11
is affected (so if you try it on the gdb-7.11-branch right now, the test
will fail).
New in v2, the test now handles mi-async on mode properly. The failure
was specific to mi-async off, but I don't think it's bad to test the
same thing under async on mode. I added a little hack when running in
async mode to work around bug 20045.
I also removed one continue/interrupt pair, as a single one was enough to
trigger the problem.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-threads-interrupt.c: New file.
* gdb.mi/mi-threads-interrupt.exp: New file.
Simon Marchi [Tue, 17 May 2016 21:07:20 +0000 (17:07 -0400)]
Fix double prompt output after run control MI commands with mi-async on (PR 20045)
When you use a run control command (-exec-run, -exec-continue,
-exec-next, ...) with mi-async on, an extra (gdb) prompt is displayed:
-exec-continue
^running
*running,thread-id="all"
(gdb)
(gdb)
It doesn't seem to be a big problem for front-ends, since this behavior
started in gdb 7.9 and we haven't heard anything about that. However,
it caused me some trouble while writing a test for PR 20039 [1].
The problem comes from an extra (gdb) prompt that we write when running
in mi-async off mode to emulate a past buggy behavior. When executing a
run control command synchronously, previous gdbs always printed a prompt
right away, even though they are not ready to accept new MI commands
until the target stops. Only at this time should they display a prompt.
But to keep backwards compatibility apparently, we print it anyway.
Since commit
198297aaf, the condition that decides whether we should
print that "bogus" prompt or not has become true, even when running with
mi-async on. Since we already print a prompt at the end of the
asynchronous command execution, it results in two prompts for one
command.
The proposed fix is to call target_can_async_p instead of
target_is_async_p, to make the condition:
if (!target_can_async_p () || sync_execution)
... show prompt ...
That shows the prompt if we are emulating a synchronous command on top
of an asynchronous target (sync_execution) or if the target simply can't
run asynchronously (!target_can_async_p ()).
Note that this code is changed and this bug fixed by Pedro's separate
console series, but I think it would be nice to have it fixed in the
mean time.
I ran the gdb.mi directory of the testsuite with mi-async on and off, I
didn't see any regressions.
gdb/ChangeLog:
* mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
of target_is_async_p.
[1] https://sourceware.org/ml/gdb-patches/2016-05/msg00075.html
Maciej W. Rozycki [Wed, 18 May 2016 10:22:30 +0000 (11:22 +0100)]
MIPS/opcodes: Correct mixed MIPS16 and microMIPS disassembly
Mixing MIPS16 and microMIPS code in a single binary isn't usually
supported but GAS happily produces such code if requested. However it
is not correctly disassembled even if a symbol table is available and
function symbols are correctly anotated with the ISA mode. This is
because the ELF-header global microMIPS ASE flag takes precedence over
MIPS16 function annotation, causing them to be treated as regular MIPS
code.
Correct the problem by respecting function symbol anotation regardless
of the ELF-header flag.
binutils/
* testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test.
* testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
opcodes/
* mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand,
replacing references to `micromips_ase' throughout.
(_print_insn_mips): Don't use file-level microMIPS annotation to
determine the disassembly mode with the symbol table.
Nick Clifton [Wed, 18 May 2016 11:44:43 +0000 (12:44 +0100)]
Updated Swedish translations for bfd and binutils
Trevor Saunders [Sat, 14 May 2016 08:33:53 +0000 (04:33 -0400)]
rx: make field type enum
gas/ChangeLog:
2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-rx.c (struct cpu_type): Change the type of a field from
int to enum rx_cpu_types.
Trevor Saunders [Sat, 14 May 2016 06:34:23 +0000 (02:34 -0400)]
change the type of some fields to bfd_reloc_code_real_type
gas/ChangeLog:
2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-dlx.c (struct machine_it): change the type of a field from
int to bfd_reloc_code_real_type.
* config/tc-tic4x.c: Likewise.
Trevor Saunders [Wed, 18 May 2016 10:17:33 +0000 (06:17 -0400)]
commit ChangeLog for previous commit
Trevor Saunders [Mon, 16 May 2016 22:04:17 +0000 (18:04 -0400)]
Change type of v850_target_arch to enum bfd_architecture
gas/ChangeLog:
2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-v850.c (v850_target_arch): change type to enum
bfd_architecture.
* config/tc-v850.h (v850_target_arch): Likewise.
Nick Clifton [Wed, 18 May 2016 09:11:47 +0000 (10:11 +0100)]
Fix lots of linker testsuite failures for the FT32 target.
* scripttempl/ft32.sc: Use fixed constants for memory region
lengths. Include DWARF debug sections.
(.data .bss): Do not assign locations during relocatable links.
* testsuite/ld-elf/compressed1d.d: Skip for FT32.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-elf/init-fini-array.d: XFail for FT32.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/orphan-region.d: Likewise.
* testsuite/ld-elf/orphan.s: Likewise.
* testsuite/ld-elf/orphan3.d: Likewise.
* testsuite/ld-elf/pr349.d: Likewise.
* testsuite/ld-elf/warn2.d: Likewise.
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Note
that the FT32 does not support shared libraries.
Alan Modra [Wed, 18 May 2016 06:14:46 +0000 (15:44 +0930)]
elf32-arm.c build breakage
* elf32-arm.c (elf32_arm_size_stubs): Free or cache local syms
for each BFD. Don't goto error_ret_free_local from outside loop.
Maciej W. Rozycki [Wed, 18 May 2016 03:30:50 +0000 (04:30 +0100)]
MIPS/readelf: Use the `d_val' dynamic entry member with the relevant tags
binutils/
* readelf.c (dynamic_section_mips_val) <DT_MIPS_RLD_VERSION>
<DT_MIPS_LOCAL_GOTNO, DT_MIPS_CONFLICTNO, DT_MIPS_LIBLISTNO>
<DT_MIPS_SYMTABNO, DT_MIPS_UNREFEXTNO, DT_MIPS_HIPAGENO>
<DT_MIPS_DELTA_CLASS_NO, DT_MIPS_DELTA_INSTANCE_NO>
<DT_MIPS_DELTA_RELOC_NO, DT_MIPS_DELTA_SYM_NO>
<DT_MIPS_DELTA_CLASSSYM_NO, DT_MIPS_COMPACT_SIZE>: Use the
`d_val' rather than `d_ptr' member of the dynamic entry.
Alan Modra [Wed, 18 May 2016 01:57:56 +0000 (11:27 +0930)]
PPC_OPERAND_SIGNOPT range.
Commit
b84bf58a accidentally extended the range of allowed negative
numbers.
* config/tc-ppc.c (ppc_insert_operand): Trim PPC_OPERAND_SIGNOPT
allowed negative range.
* testsuite/gas/ppc/power9.s: Test xxspltib of -128, not -256.
* testsuite/gas/ppc/power9.d: Update.
GDB Administrator [Wed, 18 May 2016 00:00:18 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Tue, 17 May 2016 20:44:57 +0000 (16:44 -0400)]
Fix -exec-run not running asynchronously with mi-async on (PR gdb/18077)
When doing -exec-run on a freshly started GDB, the only target on the
target stack at the time the dummy one. When mi_async_p is called to
know whether the run should be async, it queries whether the current
target (dummy) supports async, and the answer is no. The fix is to make
the code query the target that will be used for the run, which is not
necessarily the current target.
No regressions in the gdb.mi directory using the unix, native-gdbserver
and native-extended-gdbserver boards. The test doesn't pass when
forcing maint set target-async off, obviously, since it makes mi-async
have no effect. It doesn't seem like other tests are checking for that
eventuality, so I didn't in the new test.
gdb/ChangeLog:
* mi/mi-main.c (run_one_inferior): Use run target to determine
whether to run async or not.
(mi_cmd_exec_run): Likewise.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-async-run.exp: New file.
* gdb.mi/mi-async-run.c: New file.
Tom Tromey [Wed, 27 Apr 2016 16:28:56 +0000 (10:28 -0600)]
Rename OP_F90_RANGE to OP_RANGE.
This renames OP_F90_RANGE to OP_RANGE, and similarly renames the
f90_range_type enum.
2016-05-17 Tom Tromey <tom@tromey.com>
* std-operator.def (OP_RANGE): Rename from OP_F90_RANGE.
* rust-lang.c: Don't include f-lang.h.
(rust_range, rust_compute_range, rust_subscript)
(rust_evaluate_subexp): Update.
* rust-exp.y: Don't include f-lang.h.
(ast_range, convert_ast_to_expression): Update.
* parse.c (operator_length_standard): Update.
* f-lang.h (enum f90_range_type): Move to expression.h.
* f-exp.y: Use OP_RANGE.
* expression.h (enum range_type): New enum; renamed from
f90_range_type.
* expprint.c: Don't include f-lang.h.
(print_subexp_standard, dump_subexp_body_standard): Use OP_RANGE.
* eval.c (value_f90_subarray, evaluate_subexp_standard): Update.
Tom Tromey [Wed, 27 Apr 2016 01:38:56 +0000 (19:38 -0600)]
Add Rust documentation
This patch adds documentation for the new Rust support in gdb.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add Rust item.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Supported Languages): Mention Rust. Update menu.
(Rust): New node.
Tom Tromey [Wed, 27 Apr 2016 01:38:43 +0000 (19:38 -0600)]
Update gdb test suite for Rust
This updates the gdb test suite for Rust.
2016-05-17 Tom Tromey <tom@tromey.com>
Manish Goregaokar <manishsmail@gmail.com>
* lib/rust-support.exp: New file.
* lib/gdb.exp (skip_rust_tests): New proc.
(build_executable_from_specs): Handle rust.
* lib/future.exp (gdb_find_rustc): New proc.
(gdb_default_target_compile): Handle rust.
* gdb.rust/expr.exp: New file.
* gdb.rust/generics.exp: New file.
* gdb.rust/generics.rs: New file.
* gdb.rust/methods.exp: New file.
* gdb.rust/methods.rs: New file.
* gdb.rust/modules.exp: New file.
* gdb.rust/modules.rs: New file.
* gdb.rust/simple.exp: New file.
* gdb.rust/simple.rs: New file.
Tom Tromey [Wed, 27 Apr 2016 01:38:08 +0000 (19:38 -0600)]
Add support for the Rust language
This patch adds support for the Rust language.
2016-05-17 Tom Tromey <tom@tromey.com>
Manish Goregaokar <manishsmail@gmail.com>
* symtab.c (symbol_find_demangled_name): Handle Rust.
* symfile.c (init_filename_language_table): Treat ".rs" as Rust.
* std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New
constants.
* rust-lang.h: New file.
* rust-lang.c: New file.
* rust-exp.y: New file.
* dwarf2read.c (read_file_scope): Add Rust producer sniffing.
(dwarf2_compute_name, read_func_scope, read_structure_type)
(read_base_type, read_subrange_type, set_cu_language)
(new_symbol_full, determine_prefix): Handle Rust.
* defs.h (enum language) <language_rust>: New constant.
* Makefile.in (SFILES): Add rust-exp.y, rust-lang.c.
(COMMON_OBS): Add rust-exp.o, rust-lang.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.base/default.exp (set language): Add rust.
Tom Tromey [Tue, 26 Apr 2016 22:45:21 +0000 (16:45 -0600)]
Add array start and end strings to generic_val_print_decorations
For Rust value-printing, I wanted to use generic_val_print_array, but
I also wanted to control the starting and ending strings.
This patch adds new strings to generic_val_print_decorations, updates
generic_val_print_array to use them, and updates all the existing
instances of generic_val_print_decorations.
2016-05-17 Tom Tromey <tom@tromey.com>
* valprint.h (struct generic_val_print_array) <array_start,
array_end>: New fields.
* valprint.c (generic_val_print_array): Add "decorations"
parameter. Use "array_start", "array_end".
(generic_val_print) <TYPE_CODE_ARRAY>: Update.
* p-valprint.c (p_decorations): Update.
* m2-valprint.c (m2_decorations): Update.
* f-valprint.c (f_decorations): Update.
* c-valprint.c (c_decorations): Update.
Tom Tromey [Wed, 20 Apr 2016 16:09:53 +0000 (10:09 -0600)]
Add self-test framework to gdb
I wanted to unit test the Rust lexer, so I added a simple unit testing
command to gdb.
The intent is that self tests will only be compiled into gdb in
development mode. In release mode they simply won't exist. So, this
exposes $development to C code as GDB_SELF_TEST.
In development mode, test functions are registered with the self test
module. A test function is just a function that does some checks, and
throws an exception on failure.
Then this adds a new "maint selftest" command which invokes the test
functions, and a new dejagnu test case that invokes it.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document "maint selftest".
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.gdb/unittest.exp: New file.
Tom Tromey [Wed, 20 Apr 2016 14:14:16 +0000 (08:14 -0600)]
Make gdb expression debugging handle OP_F90_RANGE
print_subexp_standard and dump_subexp_body_standard did not handle
OP_F90_RANGE. Attempting to dump an expression using this opcode
would fail.
This patch adds support for this opcode to these functions.
2016-05-17 Tom Tromey <tom@tromey.com>
* expprint.c: Include f-lang.h.
(print_subexp_standard, dump_subexp_body_standard): Handle
OP_F90_RANGE.
Tom Tromey [Thu, 31 Mar 2016 20:16:56 +0000 (14:16 -0600)]
Fix latent yacc-related bug in gdb/Makefile.in init.c rule
gdb's Makefile.in does not currently scan .y files to add global
initializers from these files to init.c. However, at least ada-exp.y
tries to use this feature.
This patch fixes the problem.
2016-05-17 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Search .y files for initialization
functions.
Tom Tromey [Mon, 16 May 2016 18:21:49 +0000 (12:21 -0600)]
Add DW_LANG_Rust
include/
* dwarf2.h (enum dwarf_source_language) <DW_LANG_Rust,
DW_LANG_Rust_old>: New constants.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@235643
138bc75d-0d04-0410-961f-
82ee72b054a4
H.J. Lu [Tue, 17 May 2016 16:55:05 +0000 (09:55 -0700)]
Check global CC in at_least_gcc_version
at_least_gcc_version should check global CC.
* testsuite/lib/ld-lib.exp (at_least_gcc_version): Check
global CC.
H.J. Lu [Tue, 17 May 2016 16:53:44 +0000 (09:53 -0700)]
Fix date in ChangeLog
Thomas Preud'homme [Tue, 17 May 2016 15:35:12 +0000 (16:35 +0100)]
Make ARMv8-M GAS tests pass on non ELF targets
2016-05-17 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Force Thumb when
disassembling and stop skipping targets.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
* testsuite/gas/arm/archv8m-base.d: Also allow nops after the last
instruction for targets that have stronger alignment requirement.
* testsuite/gas/arm/archv8m-cmse-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise.
* testsuite/gas/arm/archv8m-main.d: Likewise.
* testsuite/gas/arm/archv8m.s: Add label.
* testsuite/gas/arm/archv8m-cmse.s: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr.s: Likewise.
* testsuite/gas/arm/archv8m-cmse-main.s: Likewise.
Senthil Kumar Selvaraj [Tue, 17 May 2016 12:14:26 +0000 (13:14 +0100)]
Place progmem data from AVR's libc before other progmem data.
* scripttempl/avr.sc (text): Place .progmem.data from avr-libc
above .progmem*.
* scripttempl/avrtiny.sc (text): Likewise.
Maciej W. Rozycki [Mon, 16 May 2016 07:51:26 +0000 (08:51 +0100)]
LD/ELF: Unify STB_GNU_UNIQUE handling
Take STB_GNU_UNIQUE handling scattered across targets and gather it in
the generic ELF linker. Update test suite infrastructure accordingly.
bfd/
* elf-s390-common.c (elf_s390_add_symbol_hook): Remove
STB_GNU_UNIQUE handling.
* elf32-arc.c (elf_arc_add_symbol_hook): Likewise.
* elf32-arm.c (elf32_arm_add_symbol_hook): Likewise.
* elf32-m68k.c (elf_m68k_add_symbol_hook): Likewise.
* elf32-ppc.c (ppc_elf_add_symbol_hook): Likewise.
* elf32-sparc.c (elf32_sparc_add_symbol_hook): Likewise.
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Likewise.
* elf64-sparc.c (elf64_sparc_add_symbol_hook): Likewise.
* elf64-x86-64.c (elf_x86_64_add_symbol_hook): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_add_symbol_hook): Likewise.
* elfxx-mips.c (_bfd_mips_elf_add_symbol_hook): Likewise.
* elf32-i386.c (elf_i386_add_symbol_hook): Remove function.
(elf_backend_add_symbol_hook): Remove macro.
* elflink.c (elf_link_add_object_symbols): Set `has_gnu_symbols'
for STB_GNU_UNIQUE symbols.
binutils/
* testsuite/lib/binutils-common.exp (supports_gnu_unique): New
procedure.
* testsuite/binutils-all/objcopy.exp: Use `supports_gnu_unique'
with the `strip-10' test.
ld/
* testsuite/ld-unique/unique.exp: Use `is_elf_format' and
`supports_gnu_unique' to qualify testing.
Yao Qi [Tue, 17 May 2016 07:24:26 +0000 (08:24 +0100)]
Use unsuspend_all_lwps
This patch is to replace find_inferior (&all_threads, unsuspend_one_lwp, NULL)
with unsuspend_all_lwps (NULL), which is shorter. They are equivalent
to each other.
gdb/gdbserver:
2016-05-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_stabilize_threads): Call unsuspend_all_lwps
instead of find_inferior.
GDB Administrator [Tue, 17 May 2016 00:00:18 +0000 (00:00 +0000)]
Automatic date update in version.in
Yao Qi [Mon, 16 May 2016 16:32:43 +0000 (17:32 +0100)]
Match shell_prompt # in batch-preserve-term-settings.exp
batch-preserve-term-settings.exp fails if the shell prompt isn't $. It
is # in our testing env. In fact, the shell prompt can be anything.
The perfect solution would be "set_board_info shell_prompt" in the
host board file, and use board_info shell_prompt in
batch-preserve-term-settings.exp. This is a little bit overkill to
me, and we still need to figure out the different prompts on different
shells. I also tried to start shell with the prompt preset, but there is
not unique way to set shell prompt in different shells, so I give up.
It is reasonably simple to match either $ or # for the shell prompt, and
we can easily extend it to match other char, like >.
gdb/testsuite:
2016-05-16 Yao Qi <yao.qi@linaro.org>
* gdb.base/batch-preserve-term-settings.exp: Remove variable
shell_prompt. Update shell_prompt_re.
Maciej W. Rozycki [Mon, 16 May 2016 07:22:59 +0000 (08:22 +0100)]
V850/BFD: Call `_bfd_elf_copy_private_bfd_data' again
Correct a regression introduced with commit
685080f21003 ("Adds support
for generating notes in V850 binaries.") which replaced rather than
extending the call to `_bfd_elf_copy_private_bfd_data' with
`v850_elf_copy_private_bfd_data'. Consequently ELFOSABI_GNU marking is
not propagated to output by `objcopy' from objects containing
STB_GNU_UNIQUE symbols.
bfd/
* elf32-v850.c (v850_elf_copy_notes): New function, factored out
from...
(v850_elf_copy_private_bfd_data): ... here. Call the new
function and `_bfd_elf_copy_private_bfd_data'.
binutils/
* testsuite/binutils-all/objcopy.exp: Don't skip the `strip-10'
test for the V850.
Trevor Saunders [Sat, 14 May 2016 20:31:45 +0000 (16:31 -0400)]
m32r: make mach_table static and const
It is only read in tc-m32r.c, so it might as well be static and const, and
that should help the compiler slightly.
gas/ChangeLog:
2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-m32r.c (mach_table): Make static and const.
Trevor Saunders [Sat, 14 May 2016 06:34:02 +0000 (02:34 -0400)]
tc-vax.c: make prototype of flonum_gen2vax match its definition
gas/ChangeLog:
2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-vax.c (flonum_gen2vax): Adjust prototype to match
definition.
Trevor Saunders [Sat, 14 May 2016 04:34:05 +0000 (00:34 -0400)]
stop defining linkrelax in multiple places
Defining linkrelax to have different values in as.c and tc-msp430.c /
tc-mn10300.c is at least rather tricky, and seems fragile, when we can just set
it in md_begin instead.
gas/ChangeLog:
2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-mn10300.c (md_begin): set linkrelax here instead of
defining it.
* config/tc-msp430.c (md_begin): Likewise.
Trevor Saunders [Sat, 14 May 2016 19:27:26 +0000 (15:27 -0400)]
m68hc11: make some vars type bfd_reloc_code_real_type
These variables only hold values from the bfd_reloc_code_real_type enum, and
are passed to functions that expect the argument to be of type
bfd_reloc_code_real_type, so it seems to make sense that there type is
bfd_reloc_code_real_type rather than int.
gas/ChangeLog:
2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-m68hc11.c (fixup8): Change variables type from int to
bfd_reloc_code_real_type where appropriate.
(fixup16): Likewise.
(fixup8_xg): Likewise.
Maciej W. Rozycki [Sun, 15 May 2016 05:49:54 +0000 (06:49 +0100)]
ld/testsuite/ld-elf/flags1.d: Update the xfail list
Update to match commit
924bc11ba455 ("Update section merge test.").
ld/
* testsuite/ld-elf/flags1.d: Update the xfail list.
GDB Administrator [Mon, 16 May 2016 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Sun, 15 May 2016 22:14:52 +0000 (23:14 +0100)]
SH64/GAS: Fix a -Wwrite-strings build failure
Fix a commit
6757cf57697d ("enable -Wwrite-strings for gas") regression.
gas/
* config/tc-sh64.c (shmedia_check_limits): Constify `msg'.
Maciej W. Rozycki [Sun, 15 May 2016 05:39:14 +0000 (06:39 +0100)]
ld/testsuite/ld-elf/flags1.d: Update for `*-*-nacl*' xfail removal
ld/
* testsuite/ld-elf/flags1.d: Update for `*-*-nacl*' xfail
removal.
GDB Administrator [Sun, 15 May 2016 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Sat, 14 May 2016 12:51:28 +0000 (05:51 -0700)]
Remove redundant sizeof on EXPECTED_VIEW_LENGTH
PR ld/20097
* testplug2.c (onall_symbols_read): Remove redundant sizeof
on EXPECTED_VIEW_LENGTH.
* testplug4.c (onall_symbols_read): Likewise.
GDB Administrator [Sat, 14 May 2016 00:00:14 +0000 (00:00 +0000)]
Automatic date update in version.in
Peter Bergner [Fri, 13 May 2016 20:15:00 +0000 (15:15 -0500)]
Accept valid one byte signed and unsigned values for the IMM8 operand.
opcodes/
* ppc-opc.c (IMM8): Use PPC_OPERAND_SIGNOPT.
gas/
* testsuite/gas/ppc/power9.d <xxspltib>: Add additional operand tests.
* testsuite/gas/ppc/power9.s: Likewise.
H.J. Lu [Fri, 13 May 2016 17:59:32 +0000 (10:59 -0700)]
Don't convert GOTPCREL relocation against large section
bfd/
PR ld/20093
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Don't convert
GOTPCREL relocation against large section.
ld/
PR ld/20093
* testsuite/ld-x86-64/pr20093-1.d: New file.
* testsuite/ld-x86-64/pr20093-1.s: Likewise.
* testsuite/ld-x86-64/pr20093-2.d: Likewise.
* testsuite/ld-x86-64/pr20093-2.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr20093-1 and pr20093-2.
Alan Modra [Fri, 13 May 2016 06:27:10 +0000 (15:57 +0930)]
Fix build breakage
* config/obj-coff.c (weak_uniquify): Delete unused var.
Alan Modra [Fri, 13 May 2016 02:18:56 +0000 (11:48 +0930)]
Set dynamic tag VMA and size from dynamic section when possible
Rather than searching the output for a specific named section, it's
better, where possible, to use a linker created dynamic section to set
a dynamic tag's value. That way ld doesn't depend on the output
section name, making it possibile to map dynamic sections differently.
bfd/
* elf-m10300.c (_bfd_mn10300_elf_finish_dynamic_sections): Use
linker dynamic sections in calculating size and address of
* dynamic tags rather than using output sections. Remove asserts.
* elf32-arm.c (elf32_arm_finish_dynamic_sections): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_finish_dynamic_sections): Likewise.
* elf32-cris.c (elf_cris_finish_dynamic_sections): Likewise.
* elf32-i370.c (i370_elf_finish_dynamic_sections): Likewise.
* elf32-lm32.c (lm32_elf_finish_dynamic_sections): Likewise.
* elf32-m32r.c (m32r_elf_finish_dynamic_sections): Likewise.
* elf32-m68k.c (elf_m68k_finish_dynamic_sections): Likewise.
* elf32-metag.c (elf_metag_finish_dynamic_sections): Likewise.
* elf32-microblaze.c (microblaze_elf_finish_dynamic_sections): Likewise.
* elf32-nds32.c (nds32_elf_finish_dynamic_sections): Likewise.
* elf32-nios2.c (nios2_elf32_finish_dynamic_sections): Likewise.
* elf32-or1k.c (or1k_elf_finish_dynamic_sections): Likewise.
* elf32-s390.c (elf_s390_finish_dynamic_sections): Likewise.
* elf32-score.c (s3_bfd_score_elf_finish_dynamic_sections): Likewise.
* elf32-score7.c (s7_bfd_score_elf_finish_dynamic_sections): Likewise.
* elf32-vax.c (elf_vax_finish_dynamic_sections): Likewise.
* elf32-xtensa.c (elf_xtensa_finish_dynamic_sections): Likewise.
* elf64-alpha.c (elf64_alpha_finish_dynamic_sections): Likewise.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise.
* elf64-sh64.c (sh64_elf64_finish_dynamic_sections): Likewise.
* elflink.c (bfd_elf_final_link): Likewise.
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_sections): Likewise.
* elfxx-sparc.c (sparc_finish_dyn): Likewise. Adjust error message.
* elf32-arc.c (GET_SYMBOL_OR_SECTION): Remove ASSERT arg and
don't set doit. Look up dynobj section.
(elf_arc_finish_dynamic_sections): Adjust GET_SYMBOL_OR_SECTION
invocation and dynamic tag vma calculation. Don't test
boolean var == TRUE.
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_sections): Fix
DT_JMPREL calc.
ld/
* testsuite/ld-arm/arm-elf.exp: Adjust for arm-no-rel-plt now passing.
Use different output file name for static app without .rel.plt.
* testsuite/ld-arm/arm-no-rel-plt.ld: Align .rel.dyn and .rela.dyn.
* testsuite/ld-arm/arm-no-rel-plt.out: Delete.
* testsuite/ld-arm/arm-no-rel-plt.r: New.
* testsuite/ld-arm/arm-static-app.d: Don't check file name.
* testsuite/ld-arm/arm-static-app.r: Likewise.
Alan Modra [Fri, 13 May 2016 02:04:56 +0000 (11:34 +0930)]
ld -z combreloc elf_link_sort_relocs
A linker script may put .rela.plt in with other .rela.dyn relocs.
The change to elf_reloc_type_class puts any PLT relocs last. This
patch makes the input section layout better match the sorted relocs.
* elflink.c (elf_link_sort_relocs): Wrap overlong lines. Fix
octets_per_byte. Put dynamic .rela.plt last in link orders.
Assign output_offset for reloc sections rather than writing
sorted relocs from block corresponding to output_offset.
Trevor Saunders [Wed, 6 Apr 2016 20:26:46 +0000 (16:26 -0400)]
use XNEW and related macros more
Its a bit shorter and simpler than raw xmalloc.
gas/ChangeLog:
2016-05-13 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* app.c (app_push): Use XNEW and related macros.
* as.c (parse_args): Likewise.
* cgen.c (make_right_shifted_expr): Likewise.
(gas_cgen_tc_gen_reloc): Likewise.
* config/bfin-defs.h: Likewise.
* config/bfin-parse.y: Likewise.
* config/obj-coff.c (stack_init): Likewise.
(stack_push): Likewise.
(coff_obj_symbol_new_hook): Likewise.
(coff_obj_symbol_clone_hook): Likewise.
(add_lineno): Likewise.
(coff_frob_symbol): Likewise.
* config/obj-elf.c (obj_elf_section_name): Likewise.
(build_group_lists): Likewise.
* config/obj-evax.c (evax_symbol_new_hook): Likewise.
* config/obj-macho.c (obj_mach_o_indirect_symbol): Likewise.
* config/tc-aarch64.c (insert_reg_alias): Likewise.
(find_or_make_literal_pool): Likewise.
(add_to_lit_pool): Likewise.
(fill_instruction_hash_table): Likewise.
* config/tc-alpha.c (load_expression): Likewise.
(emit_jsrjmp): Likewise.
(s_alpha_ent): Likewise.
(s_alpha_end): Likewise.
(s_alpha_linkage): Likewise.
(md_begin): Likewise.
(tc_gen_reloc): Likewise.
* config/tc-arc.c (arc_insert_opcode): Likewise.
(arc_extcorereg): Likewise.
* config/tc-bfin.c: Likewise.
* config/tc-cr16.c: Likewise.
* config/tc-cris.c: Likewise.
* config/tc-crx.c (preprocess_reglist): Likewise.
* config/tc-d10v.c: Likewise.
* config/tc-frv.c (frv_insert_vliw_insn): Likewise.
(frv_tomcat_shuffle): Likewise.
* config/tc-h8300.c: Likewise.
* config/tc-i370.c (i370_macro): Likewise.
* config/tc-i386.c (lex_got): Likewise.
(md_parse_option): Likewise.
* config/tc-ia64.c (alloc_record): Likewise.
(set_imask): Likewise.
(save_prologue_count): Likewise.
(dot_proc): Likewise.
(dot_endp): Likewise.
(ia64_frob_label): Likewise.
(add_qp_imply): Likewise.
(add_qp_mutex): Likewise.
(mark_resource): Likewise.
(dot_alias): Likewise.
* config/tc-m68hc11.c: Likewise.
* config/tc-m68k.c (m68k_frob_label): Likewise.
(s_save): Likewise.
(mri_control_label): Likewise.
(push_mri_control): Likewise.
(build_mri_control_operand): Likewise.
(s_mri_else): Likewise.
(s_mri_break): Likewise.
(s_mri_next): Likewise.
(s_mri_for): Likewise.
(s_mri_endw): Likewise.
* config/tc-metag.c (create_mnemonic_htab): Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c (s_loc): Likewise.
* config/tc-nds32.c (nds32_relax_hint): Likewise.
* config/tc-nios2.c (nios2_insn_reloc_new): Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c (rx_include): Likewise.
* config/tc-sh.c: Likewise.
* config/tc-sh64.c (shmedia_frob_section_type): Likewise.
* config/tc-sparc.c: Likewise.
* config/tc-spu.c: Likewise.
* config/tc-tic6x.c (static tic6x_unwind_info *tic6x_get_unwind): Likewise.
(tic6x_start_unwind_section): Likewise.
* config/tc-tilegx.c: Likewise.
* config/tc-tilepro.c: Likewise.
* config/tc-v850.c: Likewise.
* config/tc-visium.c: Likewise.
* config/tc-xgate.c: Likewise.
* config/tc-xtensa.c (xtensa_translate_old_userreg_ops): Likewise.
(new_resource_table): Likewise.
(resize_resource_table): Likewise.
(xtensa_create_trampoline_frag): Likewise.
(xtensa_maybe_create_literal_pool_frag): Likewise.
(cache_literal_section): Likewise.
* config/xtensa-relax.c (append_transition): Likewise.
(append_condition): Likewise.
(append_value_condition): Likewise.
(append_constant_value_condition): Likewise.
(append_literal_op): Likewise.
(append_label_op): Likewise.
(append_constant_op): Likewise.
(append_field_op): Likewise.
(append_user_fn_field_op): Likewise.
(enter_opname_n): Likewise.
(enter_opname): Likewise.
(split_string): Likewise.
(parse_insn_templ): Likewise.
(clone_req_or_option_list): Likewise.
(clone_req_option_list): Likewise.
(parse_option_cond): Likewise.
(parse_insn_pattern): Likewise.
(parse_insn_repl): Likewise.
(build_transition): Likewise.
(build_transition_table): Likewise.
* dw2gencfi.c (alloc_fde_entry): Likewise.
(alloc_cfi_insn_data): Likewise.
(cfi_add_CFA_remember_state): Likewise.
(dot_cfi_escape): Likewise.
(dot_cfi_fde_data): Likewise.
(select_cie_for_fde): Likewise.
* dwarf2dbg.c (dwarf2_directive_loc): Likewise.
* ecoff.c (ecoff_add_bytes): Likewise.
(ecoff_build_debug): Likewise.
* input-scrub.c (input_scrub_push): Likewise.
(input_scrub_begin): Likewise.
(input_scrub_next_buffer): Likewise.
* itbl-ops.c (append_insns_as_macros): Likewise.
(alloc_entry): Likewise.
(alloc_field): Likewise.
* listing.c (listing_newline): Likewise.
(listing_listing): Likewise.
* macro.c (get_any_string): Likewise.
(delete_macro): Likewise.
* stabs.c (generate_asm_file): Likewise.
(stabs_generate_asm_lineno): Likewise.
* subsegs.c (subseg_change): Likewise.
(subseg_get): Likewise.
* symbols.c (define_dollar_label): Likewise.
(symbol_relc_make_sym): Likewise.
* write.c (write_relocs): Likewise.
Trevor Saunders [Mon, 28 Mar 2016 09:49:15 +0000 (05:49 -0400)]
use xstrdup, xmemdup0 and concat more
gas/ChangeLog:
2016-05-13 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/obj-coff.c (obj_coff_def): Simplify string copying.
(weak_name2altname): Likewise.
(weak_uniquify): Likewise.
(obj_coff_section): Likewise.
(obj_coff_init_stab_section): Likewise.
* config/obj-elf.c (obj_elf_section_name): Likewise.
(obj_elf_init_stab_section): Likewise.
* config/obj-evax.c (evax_shorten_name): Likewise.
* config/obj-macho.c (obj_mach_o_make_or_get_sect): Likewise.
* config/tc-aarch64.c (create_register_alias): Likewise.
* config/tc-alpha.c (load_expression): Likewise.
(s_alpha_file): Likewise.
(s_alpha_section_name): Likewise.
(tc_gen_reloc): Likewise.
* config/tc-arc.c (md_assemble): Likewise.
* config/tc-arm.c (create_neon_reg_alias): Likewise.
(start_unwind_section): Likewise.
* config/tc-hppa.c (pa_build_unwind_subspace): Likewise.
(hppa_elf_mark_end_of_function): Likewise.
* config/tc-nios2.c (nios2_modify_arg): Likewise.
(nios2_negate_arg): Likewise.
* config/tc-rx.c (rx_section): Likewise.
* config/tc-sh64.c (sh64_consume_datalabel): Likewise.
* config/tc-tic30.c (tic30_find_parallel_insn): Likewise.
* config/tc-tic54x.c (tic54x_include): Likewise.
(tic54x_macro_info): Likewise.
(subsym_get_arg): Likewise.
(subsym_substitute): Likewise.
(tic54x_start_line_hook): Likewise.
* config/tc-xtensa.c (xtensa_literal_prefix): Likewise.
(xg_reverse_shift_count): Likewise.
* config/xtensa-relax.c (enter_opname_n): Likewise.
(split_string): Likewise.
* dwarf2dbg.c (get_filenum): Likewise.
(process_entries): Likewise.
* expr.c (operand): Likewise.
* itbl-ops.c (alloc_entry): Likewise.
* listing.c (listing_message): Likewise.
(listing_title): Likewise.
* macro.c (check_macro): Likewise.
* stabs.c (s_xstab): Likewise.
* symbols.c (symbol_relc_make_expr): Likewise.
* write.c (compress_debug): Likewise.
GDB Administrator [Fri, 13 May 2016 00:00:12 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Thu, 12 May 2016 23:50:34 +0000 (16:50 -0700)]
Handle symbols defined/referenced only within IR
The plugin is called to claim symbols in an archive element from
plugin_object_p. But those symbols aren't needed to create output.
They are defined and referenced only within IR. get_symbols should
return resolution based on IR symbol kinds.
PR ld/20070
* Makefile.am (noinst_LTLIBRARIES): Add libldtestplug4.la.
(libldtestplug4_la_SOURCES): New.
(libldtestplug4_la_CFLAGS): Likewise.
(libldtestplug4_la_LDFLAGS): Likewise.
* Makefile.in: Regenerated.
* plugin.c (get_symbols): Return resolution based on IR symbol
kinds for symbols defined/referenced only within IR.
* testplug4.c: New file.
* ld/testsuite/ld-plugin/pr20070.d: Likewise.
* ld/testsuite/ld-plugin/pr20070a.c: Likewise.
* ld/testsuite/ld-plugin/pr20070b.c: Likewise.
* testsuite/ld-plugin/plugin.exp (plugin4_name): New.
(plugin4_path): Likewise.
Add a test for ld/20070.
Doug Evans [Thu, 12 May 2016 16:20:57 +0000 (09:20 -0700)]
PR symtab/19999 gdb unable to resolve vars with fission+PIE
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
add base_offset.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (build_executable_from_fission_assembler): Pass
$options when building executable.
* gdb.dwarf2/fission-loclists-pie.c: New file.
* gdb.dwarf2/fission-loclists-pie.exp: New file.
This page took 0.048215 seconds and 4 git commands to generate.