Jeff Garzik [Tue, 14 Aug 2007 05:24:56 +0000 (01:24 -0400)]
[netdrvr] ns83820: add ethtool media support
Split out from patch authored by Dan Faerch <dan@hacker.dk>.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mariusz Kozlowski [Wed, 8 Aug 2007 11:20:26 +0000 (13:20 +0200)]
net/tulip/xircom_cb.c: remove superfulous priv assignment
Unpatched version does sth like this:
dev = alloc_etherdev(...
private = netdev_priv(dev);
...
dev->priv = private;
which doesn't make much sense (does it?) because this is done in
alloc_netdev() already.
struct net_device *alloc_netdev(...
{
...
if (sizeof_priv)
dev->priv = netdev_priv(dev);
This patch removes superfluous code.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
drivers/net/tulip/xircom_cb.c | 32853 -> 32831 (-22 bytes)
drivers/net/tulip/xircom_cb.o | 123984 -> 123984 (0 bytes)
drivers/net/tulip/xircom_cb.c | 1 -
1 file changed, 1 deletion(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Sivakumar Subramani [Mon, 6 Aug 2007 09:38:19 +0000 (05:38 -0400)]
S2IO: Fixed Link LED issue when MSI-X is enabled
-Fixed Link LED issue when MSI-X is enabled.
Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Sivakumar Subramani [Mon, 6 Aug 2007 09:36:28 +0000 (05:36 -0400)]
S2IO: Fixes in MSIX related code.
- Calling store_xmsi_data to store the MSI-X datas during initialization
in s2io-init_nic function
- Disabling NAPI when MSI-X is enabled
- Freeing sp->entries and sp->s2io_entries in s2io_rem_isr
Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Sivakumar Subramani [Sat, 15 Sep 2007 20:11:34 +0000 (13:11 -0700)]
[S2IO]: Making MSIX as default intr_type
- Making MSIX as default intr_type
- Driver will test MSI-X by issuing test MSI-X vector and if fails it will
fallback to INTA
Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Garzik [Sat, 15 Sep 2007 19:36:46 +0000 (12:36 -0700)]
[8139too]: tab-align enums and structs; remove dead code
* (main change) tab-align hardware register value enums, and hw struct
* MMIO_FLUSH_AUDIT_COMPLETE has been defined to 1 for a while. Remove
the code activated when it is set to zero.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Garzik [Wed, 8 Aug 2007 06:16:04 +0000 (02:16 -0400)]
[netdrvr] 8139cp, 8139too: convert to generic DMA
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mariusz Kozlowski [Tue, 31 Jul 2007 22:11:50 +0000 (00:11 +0200)]
drivers/net/via-velocity.c: mostly kmalloc + memset conversion to kcalloc
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
drivers/net/via-velocity.c | 88263 -> 88120 (-143 bytes)
drivers/net/via-velocity.o | 254264 -> 253828 (-436 bytes)
drivers/net/via-velocity.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mariusz Kozlowski [Tue, 31 Jul 2007 21:58:36 +0000 (23:58 +0200)]
drivers/net/sb1250-mac.c: kmalloc + memset conversion to kcalloc
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
drivers/net/sb1250-mac.c | 76286 -> 76199 (-87 bytes)
drivers/net/sb1250-mac.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Thu, 2 Aug 2007 20:31:25 +0000 (16:31 -0400)]
drivers/net/skfp: Remove dead code referencing pci_find_device()
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ralf Baechle [Wed, 25 Jul 2007 11:31:57 +0000 (12:31 +0100)]
IOC3: Switch hw checksumming to ethtool configurable.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Denis Cheng [Wed, 18 Jul 2007 07:24:49 +0000 (15:24 +0800)]
drivers/net/cxgb3: removed several unneeded zero initilization
Cc: linux-bugs@chelsio.com
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Yoann Padioleau [Mon, 23 Jul 2007 13:18:21 +0000 (15:18 +0200)]
dev->priv to netdev_priv(dev), drivers/net/tokenring/
Replacing accesses to dev->priv to netdev_priv(dev). The replacment
is safe when netdev_priv is used to access a private structure that is
right next to the net_device structure in memory.
Cf http://groups.google.com/group/comp.os.linux.development.system/browse_thread/thread/
de19321bcd94dbb8/
0d74a4adcd6177bd
This is the case when the net_device structure was allocated with
a call to alloc_netdev or one of its derivative.
Here is an excerpt of the semantic patch that performs the transformation
@ rule1 @
type T;
struct net_device *dev;
@@
dev =
(
alloc_netdev
|
alloc_etherdev
|
alloc_trdev
)
(sizeof(T), ...)
@ rule1bis @
struct net_device *dev;
expression E;
@@
dev->priv = E
@ rule2 depends on rule1 && !rule1bis @
struct net_device *dev;
type rule1.T;
@@
- (T*) dev->priv
+ netdev_priv(dev)
PS: I have performed the same transformation on the whole kernel
and it affects around 70 files, most of them in drivers/net/.
Should I split my patch for each subnet directories ? (wireless/, wan/, etc)
Thanks to Thomas Surrel for helping me refining my semantic patch.
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
3c359.c | 58 +++++++++++++++++++++++++++++-----------------------------
ibmtr.c | 38 +++++++++++++++++++-------------------
lanstreamer.c | 32 ++++++++++++++++----------------
madgemc.c | 4 ++--
olympic.c | 36 ++++++++++++++++++------------------
tmspci.c | 4 ++--
6 files changed, 86 insertions(+), 86 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Tue, 24 Jul 2007 05:30:36 +0000 (01:30 -0400)]
[netdrvr] skfp: remove a bunch of dead code
The driver has not compiled in anything except PCI support for many
years (see drivers/net/skfp/Makefile). This driver is also unmaintained
for many years, so arguments for keeping the cross-OS, cross-bus (ISA,
EISA, MCA) code do not exist.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Dan Williams [Fri, 3 Aug 2007 13:43:03 +0000 (09:43 -0400)]
[PATCH] libertas: bump driver version
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 3 Aug 2007 13:40:55 +0000 (09:40 -0400)]
[PATCH] libertas: fix sparse-reported problems
A few fields being converted to the wrong sized type, and a few missed
endian conversions.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 17:20:29 +0000 (13:20 -0400)]
[PATCH] libertas: better descriptions for association errors
Describe the association response status code the firmware
returns, based on mail to libertas-dev from Ronak.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 17:20:12 +0000 (13:20 -0400)]
[PATCH] libertas: ignore spurious mesh autostart events
Don't trust the firmware to always send them at the right time,
ignore them when the driver thinks mesh autostart is disabled.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 17:19:56 +0000 (13:19 -0400)]
[PATCH] libertas: fix misspelling in debug message
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Thu, 2 Aug 2007 17:19:24 +0000 (13:19 -0400)]
[PATCH] libertas: pass boot2 version to firmware
Boot2 version used to be hardcoded in the uploaded firmware,
this patch preserves the boot2 version before uploading firmware
and sends it to the firmware again on resume.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 17:19:04 +0000 (13:19 -0400)]
[PATCH] libertas: push WEXT scan requests to a work queue
Push WEXT scan requests to a workqueue and have each partial scan queue
the next part, then only report results when the complete scan has finished.
Full scans don't go through the work queue.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Eugene Teo [Thu, 2 Aug 2007 17:18:07 +0000 (13:18 -0400)]
[PATCH] drivers/net/wireless/libertas/cmd.c: fix adapter->driver_lock dereference
adapter is NULL if cmdnode is not.
Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 17:17:41 +0000 (13:17 -0400)]
[PATCH] libertas: fix assignment of WEP key type
keytype is a u8
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Thu, 2 Aug 2007 17:16:55 +0000 (13:16 -0400)]
[PATCH] libertas: monitor mode support for OLPC firmware
Driver support for the monitor mode support that will be available in the next
OLPC 'bleeding edge' Marvell firmware release (most likely, 5.110.16.p2).
To activate monitor mode,
echo mode > /sys/class/net/{ethX,mshX}/device/libertas_rtap
where mode is the hex mask that specifies which frames to sniff (in short, 0x1
for data, 0x2 for all management but beacons, 0x4 for beacons). Any non zero
mode will activate the monitor mode, inhibiting transmission in ethX and mshX
interfaces and routing all the incoming traffic to a new rtapX interface that
will output the packets in 802.11+radiotap headers format.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jean Tourrilhes [Thu, 2 Aug 2007 17:16:30 +0000 (13:16 -0400)]
[PATCH] libertas: fix a few wext abuses...
o SIOCGIWNAME is not designed to return the version number of the driver.
On the other hand, you are free to abuse SIOCGIWNICKN for that purpose.
o Don't attempt to fix the WE19/WE20 transition in the driver, because
your fixes are bogus, and redundant with the code in the kernel (you may
endup with +2, you can't read 32 char ESSID...).
o In SIOCSIWTXPOW, if you specified in iwrange that you want dBm, you
should only get dBm, which allow to reduce code bloat.
Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Thu, 2 Aug 2007 17:16:02 +0000 (13:16 -0400)]
[PATCH] libertas: keep mesh autostart enabled while asleep
After loading the firmware, mesh autostart will be disabled. After that, the
user will still be able to enable or disable it at will. On suspend, it will be
always activated and later on resume it will go back to the state it had before
going to sleep.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Thu, 2 Aug 2007 17:15:40 +0000 (13:15 -0400)]
[PATCH] libertas: revert CAPINFO_MASK to its original value
CAPINFO_MASK changed on commits
981f187b and
a091095b. Reverting to the original
value. Also move CAPINFO_MASK into the sole user, join.c. CAPINFO_MASK
should be in host CPU byte order; capability is converted to device
byte order elsewhere.
This fixes OLPC ticket #2161
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 17:14:56 +0000 (13:14 -0400)]
[PATCH] libertas: push mesh beacon bit to userspace in scan results
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 17:14:29 +0000 (13:14 -0400)]
[PATCH] libertas: send association events on adhoc reassociation
Send association event to userspace when reassociating to the same
ad-hoc network, because it's still an association.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:14:07 +0000 (13:14 -0400)]
[PATCH] libertas: fix two debug statements in cmdresp.c
Purely cosmetic: this moves an lbs_deb_enter() to the proper place
and changes an erraneous lbs_deb_enter_args() into lbs_deb_leave_args()
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:13:00 +0000 (13:13 -0400)]
[PATCH] libertas: remove bss_descriptor->timestamp
Noone used this variable.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:12:45 +0000 (13:12 -0400)]
[PATCH] libertas: remove bss_descriptior->networktsf
This value was parsed out, but then nowhere used ... except in
some debugfs output. I can't imagine anyone wanting to use this
value for anything real (as no other driver exports it), so
bye-bye.
Along this, made the columns of
/sys/kernel/debug/libertas_wireless/*/getscantable align again.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:12:27 +0000 (13:12 -0400)]
[PATCH] libertas: remove adapter->scantype
scantype was initialized with CMD_SCAN_TYPE_ACTIVE, but there is no code
that would ever change it, so we can use that variable directly.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:12:12 +0000 (13:12 -0400)]
[PATCH] libertas: remove adapter->scanmode
scanmode was initialized with CMD_BSS_TYPE_ANY, but there is no code
that ever can store another value there, so it can go away.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:11:38 +0000 (13:11 -0400)]
[PATCH] libertas: remove adapter->beaconperiod
beaconperiod was initialized with MRVDRV_BEACON_INTERVAL, but there is
no code that would ever change it's value. We can use the define directly.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:11:19 +0000 (13:11 -0400)]
[PATCH] libertas: remove adapter->adhoc_grate_enabled
The variable was initialized with 0 (false). There is no code that would
ever change it, so we can use the false-patch directly.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:10:59 +0000 (13:10 -0400)]
[PATCH] libertas: remove adapter->listeninterval
listeninterval was initialized with MRVDRV_DEFAULT_LISTEN_INTERVAL, but
there exists that would ever change it. So we can use this define directly.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:10:41 +0000 (13:10 -0400)]
[PATCH] libertas: remove adapter->regiontableindex
The value was computed, but then never used.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:10:05 +0000 (13:10 -0400)]
[PATCH] libertas: remove adapter->atimwindow
This varaible was initialized with 0 but there is no code that would ever
change it's value. So it can go away.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:09:49 +0000 (13:09 -0400)]
[PATCH] libertas: remove adapter->multipledtim
multipledtim was initialized with MRVDRV_DEFAULT_MULTIPLE_DTIM and then
kept at that value, so we could use that define directly.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:09:34 +0000 (13:09 -0400)]
[PATCH] libertas: remove adapter->locallisteninterval
locallisteninterval was initialized with 0, but there is no code that
changes it, rendering it rather useless.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:09:15 +0000 (13:09 -0400)]
[PATCH] libertas: remove adapter->nullpktinterval
No code ever initialized this variable, so it was 0 because of kzalloc().
But no other code changes it, making it rather useless.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:08:24 +0000 (13:08 -0400)]
[PATCH] libertas: remove adapter->{data,bcn}_avg_factor
Those two variables were initialized with some default values, but there
is no code that would ever change them. So we could use as well the defaults
directly.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:07:56 +0000 (13:07 -0400)]
[PATCH] libertas: remove adapter->rxpd_rate
No code uses the contents of this variable, so it can go.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:07:15 +0000 (13:07 -0400)]
[PATCH] libertas: remove adapter->txrate
The value of txrate was only set by a CMD_802_11_TX_RATE_QUERY command,
but there was no code in the driver that ever issued this command.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 17:06:54 +0000 (13:06 -0400)]
[PATCH] libertas: fix WEXT quality reporting
Found by Ronak and others at Marvell.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:06:11 +0000 (13:06 -0400)]
[PATCH] libertas: remove adapter->pkttxctrl
The variable was initialized to 0 and nowhere else changed, so basically
the per-packet TX control wasn't used.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:05:53 +0000 (13:05 -0400)]
[PATCH] libertas: remove adapter->scanprobes
The variable was initialized to 0 and nowhere else to anything
different.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:05:32 +0000 (13:05 -0400)]
[PATCH] libertas: remove adapter->prescan
The value 1 was assigned to it and there was nowhere any code
that would have changed that to 0.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:05:08 +0000 (13:05 -0400)]
[PATCH] libertas: remove adapter->{rx,tx}antenna
There was nowhere any code that used the values of those
variables.
This patch also removes two static functions that are now unused.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 17:04:28 +0000 (13:04 -0400)]
[PATCH] libertas: remove unused adapter->prev_XXXX variables
There were just used in some debug output, but nowhere else.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 4 Oct 2007 00:25:41 +0000 (17:25 -0700)]
[PATCH] add support for Marvell 8385 CF cards
This patch adds support for Marvell based 8385 compact flash cards.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luis Carlos Cobo [Thu, 2 Aug 2007 15:55:22 +0000 (11:55 -0400)]
[PATCH] libertas: Avoid MESH_AUTOSTARTED spam on console
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:54:31 +0000 (11:54 -0400)]
[PATCH] libertas: use LBS_DEB_HOST for host-to-card communications
... and LBS_DEB_CMD for command execution. Also tidies misc
comments to give a consistent output.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:54:10 +0000 (11:54 -0400)]
[PATCH] libertas: use LBS_DEB_HOST for host-to-card communications
... and LBS_DEB_CMD for command execution. Also tidies misc
comments to give a consistent output.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:53:36 +0000 (11:53 -0400)]
[PATCH] libertas: remove a hundred CMD_RET_xxx definitions
types.h contains the same amount of CMD_RET_xxx and CMD_xxx definitions.
They contains the same info: the firmware command opcode and, when the
firmware sends back a result, the command opcode ORed with 0x8000.
Having the same data twice in the source code is redundant and can lead to
errors (e.g. if you update or delete only one instance). This patch removed
all CMD_RET_xxx definitions and introduces a simple CMD_RET() macro.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:53:06 +0000 (11:53 -0400)]
[PATCH] libertas: make the hex dumper nicer
Currently, when you define LBS_DEB_HEX, you get every hex dump in the
whole driver, e.g. for LBS_DEB_CMD, LBS_DEB_RX, LBS_DEB_TX etc. This
patch makes sure that you only get the hexdump that you're interested in.
Renamed lbs_dbg_hex() into lbs_deb_hex(), like the other lbs_deb_XXX()
macros.
Made lbs_deb_hex() issue a line feed (and a new prompt) after 16 bytes.
As lbs_deb_hex() now prints the ":" after the prompt by itself, removed
the misc colons in the various *.c files.
lbs_deb_XXX() now print the debug category as well.
As lbs_deb_XXX() --- and especially lbs_deb_11d() --- now print the
category, I removed various "11D:" prefixes in 11d.c as well.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Thu, 2 Aug 2007 15:52:29 +0000 (11:52 -0400)]
[PATCH] Support for mesh autostart deactivation through sysfs
echo 0 > /sys/class/net/mshX/autostart_enabled
This is supported from Marvell firmware version 5.110.16.p0 (to be released).
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:51:18 +0000 (11:51 -0400)]
[PATCH] libertas: remove debugmode
There is nowhere any place that set's this variable.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:50:35 +0000 (11:50 -0400)]
[PATCH] libertas: tune hardware info output
This changes the output of hardware related info from:
libertas: GET_HW_SPEC: FWReleaseVersion- 5.0.11.p0
libertas: GET_HW_SPEC: Permanent addr- 0:16:41:72:f6:a8
libertas: GET_HW_SPEC: hwifversion=0x2 version=0x213
to:
libertas: GET_HW_SPEC: FWReleaseVersion: 5.0.11.p0
libertas: GET_HW_SPEC: Permanent addr: 00:16:41:72:f6:a8
libertas: GET_HW_SPEC: hwifversion: 0x2, version: 0x213
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:50:12 +0000 (11:50 -0400)]
[PATCH] libertas: access mesh_dev more carefully
The CF/SDIO firmware doesn't support Mesh, so priv->mesh_dev is
NULL there. Protect all accesses.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:49:45 +0000 (11:49 -0400)]
[PATCH] libertas: uppercase some #defines
Usually constants defined by #define are in ALL_UPPERCASE. This patch
fixes this.
I also shuffled the bits around so that they match the bit positions in the
host-interrupt-state register of the CF/SDIO card :-)
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:49:06 +0000 (11:49 -0400)]
[PATCH] libertas: make more functions static & remove unused functions
Some functions where declared in header files, but used only once. They are
now static functions.
After doing this, I found out that some functions weren't used at all. I
removed this dead code.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:45:30 +0000 (11:45 -0400)]
[PATCH] libertas: fix one more sparse warning
adhoc_rates_b is only used locally, so make it static
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:45:12 +0000 (11:45 -0400)]
[PATCH] libertas: remove fw.c
Firmware download is quite different for different hardware. The SDIO and CF
cards have two flat files that need to be downloaded, whereas the USB driver
needs only one file, but with an internal structure.
The code that handles this (USB only) structured file is currently in fw.c.
This patch moves this code into if_usb.c. The remaining functions in fw.c
have not much to do with firmware, they are various card- and network-stack
initialisation functions. I've moved them into main.c.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:40:45 +0000 (11:40 -0400)]
[PATCH] libertas: simplify and clean up data rate handling
Remove unused/duplicated fields and consolidate static data rate arrays,
for example the libertas_supported_rates[] and datarates[] arrays in
the bss_descriptor structure, and the libertas_supported_rates field
in the wlan_adapter structure.
Introduce libertas_fw_index_to_data_rate and libertas_data_rate_to_fw_index
functions and use them everywhere firmware requires a rate index rather
than a rate array.
The firmware requires the 4 basic rates to have the MSB set, but most
other stuff doesn't, like WEXT and mesh ioctls. Therefore, only set the MSB
on basic rates when pushing rate arrays to firmware instead of doing a ton
of (rate & 0x7f) everywhere.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:39:19 +0000 (11:39 -0400)]
[PATCH] libertas: wlan_ -> libertas_ function prefix renames for main.c
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:36:22 +0000 (11:36 -0400)]
[PATCH] libertas: move generic firmware reset command to common code
It's not USB specific, so move it out of the USB interface code.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:35:46 +0000 (11:35 -0400)]
[PATCH] libertas: fix more mixed-case abuse
Mistakently introduced by a previous patch to upper-case all command
constants.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:34:47 +0000 (11:34 -0400)]
[PATCH] libertas: bump version to 322.p1
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:34:24 +0000 (11:34 -0400)]
[PATCH] libertas: new mesh control knobs
Support for new mesh control knobs on firmware 5.220.11.p4:
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:32:25 +0000 (11:32 -0400)]
[PATCH] libertas: remove thread.h and make kthread usage clearer
Remove the thread.h abstractions and opencode kthread stuff
to make it clearer.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:31:49 +0000 (11:31 -0400)]
[PATCH] libertas: fix debug build breakage due to field rename
Missed when fixing mixed-case structure field names.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:31:18 +0000 (11:31 -0400)]
[PATCH] libertas: re-uppercase command defines and other constants
For readability.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:18:40 +0000 (11:18 -0400)]
[PATCH] libertas: fix mixed-case abuse in cmd_ds_802_11_ad_hoc_start
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:18:23 +0000 (11:18 -0400)]
[PATCH] libertas: fix mixed-case abuse in cmd_ds_802_11_ad_hoc_result
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:16:07 +0000 (11:16 -0400)]
[PATCH] libertas: fix mixed-case abuse in cmd_ds_802_11_scan
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:14:49 +0000 (11:14 -0400)]
[PATCH] libertas: remove if_bootcmd.c
Move the only function in it to if_usb.c, which was its
only user anyway.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Thu, 2 Aug 2007 14:51:27 +0000 (10:51 -0400)]
[PATCH] libertas: specific mesh scan for mshX interface
With this patch, scanning with mshX interface will only return mesh networks. To
differentiate them, a specific mesh IE in beacons/probe responses is used. This
IE has been introduced in firmware release 5.110.14. Note:
Even though there can be at most a single mesh per channel, this scan might
return several networks in the same channel.
If all nodes in a mesh network are associated to an AP, they won't produce
beacons/probe responses, thus the network will not be listed. This will be fixed
in future firmware releases.
Scan on ethX interface is not filtered, so it will list both mesh and non-mesh
networks.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 14:48:02 +0000 (10:48 -0400)]
[PATCH] libertas: clean up 802.11 IE post-scan handling
Remove struct IE_WPA and just use direct checking of the IE
bytes like ipw. Remove WLAN_802_11_VARIABLE_IEs because
it's unused.
Kill ieeetypes_elementid enum and just use MFIE_* from
ieee80211.h. Also use struct ieee80211_info_element for
scan buffer processing to simplify pointer usage.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 14:47:17 +0000 (10:47 -0400)]
[PATCH] libertas: clean up indentation in libertas_association_worker
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 14:45:55 +0000 (10:45 -0400)]
[PATCH] libertas: rename WLAN_802_11_KEY to enc_key and clean up usage
It doesn't touch hardware and therefore doesn't need endian notations
either.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 14:43:44 +0000 (10:43 -0400)]
[PATCH] libertas: kill ieeetypes_capinfo bitfield, use ieee80211.h types
Use standard BSS capability field constants from ieee80211.h.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Yoann Padioleau [Fri, 3 Aug 2007 17:37:16 +0000 (19:37 +0200)]
[PATCH] dev->priv to netdev_priv(dev), for drivers/net/wireless
Replacing accesses to dev->priv to netdev_priv(dev). The replacment
is safe when netdev_priv is used to access a private structure that is
right next to the net_device structure in memory. Cf
http://groups.google.com/group/comp.os.linux.development.system/browse_thread/thread/
de19321bcd94dbb8/
0d74a4adcd6177bd
This is the case when the net_device structure was allocated with
a call to alloc_netdev or one of its derivative.
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: mcgrof@gmail.com
Cc: linux-wireless@vger.kernel.org
Cc: akpm@linux-foundation.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mariusz Kozlowski [Tue, 31 Jul 2007 21:34:50 +0000 (23:34 +0200)]
[PATCH] drivers/net/wireless/prism54/oid_mgt.c: kmalloc + memset conversion to kzalloc
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Matthias Kaehlcke [Mon, 30 Jul 2007 05:40:04 +0000 (07:40 +0200)]
[PATCH] Use mutex instead of semaphore in the Host AP driver
The Host AP driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bill Nottingham [Fri, 27 Jul 2007 23:43:17 +0000 (19:43 -0400)]
[PATCH] remove gratuitous space in airo module description
Currently the modinfo looks like:
description: Support for Cisco/Aironet 802.11 wireless ethernet cards. Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.
Arguably, it should be cut at the end of the first sentence.
This at least makes it somewhat more legible.
Signed-off-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Faidon Liambotis [Sun, 22 Jul 2007 13:16:59 +0000 (16:16 +0300)]
[PATCH] Kconfig: remove references of pcmcia-cs
pcmcia-cs/cardmgr is deprecated and mentioning it in the help text is
misleading.
Signed-off-by: Faidon Liambotis <paravoid@debian.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Faidon Liambotis [Sun, 22 Jul 2007 13:16:36 +0000 (16:16 +0300)]
[PATCH] Kconfig: order options
Reorder the Atmel options so that the menu appears saner.
Before:
< > Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)
<*> Atmel at76c50x chipset 802.11b support
< > Atmel at76c506 PCI cards (NEW)
< > Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards
< > Atmel at76c502/at76c504 PCMCIA cards (NEW)
After:
< > Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)
<*> Atmel at76c50x chipset 802.11b support
< > Atmel at76c506 PCI cards (NEW)
< > Atmel at76c502/at76c504 PCMCIA cards (NEW)
< > Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards
Signed-off-by: Faidon Liambotis <paravoid@debian.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ulrich Kunitz [Sat, 21 Jul 2007 21:42:13 +0000 (22:42 +0100)]
[PATCH] zd1211rw: monitor all packets
While in monitor mode the zd1211rw received only a limited
set of packets. This patch forwards now all packets the device
receives. Notify that while monitoring no FCS checks are done; so
strange packets might appear in the network sniffer of your
choice.
ATTENTION: Support for multiple interfaces on a single ZD1211
device is currently broken. So this code works only on the first
interface.
Here is an example to put the device in monitor mode.
iwconfig wlan0 mode monitor
ifconfig wlan0 up
iwconfig wlan0 channel 10
[dsd@gentoo.org: backport to mainline]
Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Wu [Fri, 31 Aug 2007 05:15:25 +0000 (01:15 -0400)]
[PATCH] Add adm8211 802.11b wireless driver
This patch adds a mac80211 wireless driver for ADMtek ADM8211 based
wireless cards.
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 10 Sep 2007 12:15:25 +0000 (14:15 +0200)]
[MAC80211]: remove/change some comments about Michael MIC hardware offload
There are a few TODO comments in the mac80211 sources regarding
hardware offload for Michael MIC verification. Those items are,
however, better handled in the driver instead of the stack, if
any device requires such hand-holding.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomas Winkler [Sun, 2 Sep 2007 19:58:21 +0000 (22:58 +0300)]
[MAC80211]: PS mode fix
tx.mode must be set also for buffered frames. It is used in the tx hanlders
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Fri, 24 Aug 2007 18:29:34 +0000 (11:29 -0700)]
[MAC80211]: use internal network device stats
Stats are now available for device usage inside network_device
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
warmcat [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: get STA after tx radiotap snipped
Johannes Berg noticed that in __ieee80211_tx_prepare() we try to get the
STA from addr1 of the ieee80211 header when the radiotap header is actually
still at the front of the packet. This patch defers doing that until the
radiotap header is gone.
Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Volker Braun [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: ignore key index on pairwise key (WEP only)
Work-around for broken APs that use a non-zero key index for WEP
pairwise keys. With this patch, WEP encryption only is exempt from
providing a zero key index.
Signed-off-by: Volker Braun <volker.braun@physik.hu-berlin.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: remove TKIP mixing for hw accel again
The TKIP mixing code was added for the benefit of Intel's ipw3945
chipset but that code ended up not using it. We have previously
identified many problems with this code and it crystallized that
library functions for mixing are likely to handle this in much
more generality and might allow b43 to take advantage of hardware
acceleration for TKIP.
Due to these reasons, remove the TKIP mixing for hardware
accelerated crypto operations.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: remove HW_KEY_IDX_INVALID
This patch makes the mac80211/driver interface rely only on the
IEEE80211_TXCTL_DO_NOT_ENCRYPT flag to signal to the driver whether
a frame should be encrypted or not, since mac80211 internally no
longer relies on HW_KEY_IDX_INVALID either this removes it, changes
the key index to be a u8 in all places and makes the full range of
the value available to drivers.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: some more documentation
This patch formats some documentation in mac80211.h into kerneldoc
and also adds some more explanations for hardware crypto.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: remove set_key_idx callback
No existing drivers use this callback, hence there's no telling
how it might be used. In fact, it is unlikely to be of much use
as-is because the default key index isn't something that the
driver can do much with without knowing which interface it was
for etc. And if it needs the key index for the transmitted frame,
it can get it by keeping a reference to the key_conf structure
and looking it up by hw_key_idx.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This page took 0.050899 seconds and 5 git commands to generate.