Nick Clifton [Wed, 20 May 2020 10:43:56 +0000 (11:43 +0100)] 
Fix thinko in bfd ChangeLog entry
Tom de Vries [Wed, 20 May 2020 09:48:39 +0000 (11:48 +0200)] 
[gdb/symtab] Handle .gdb_index in ada language mode
When running test-case gdb.base/with.exp with target board cc-with-gdb-index,
we have:
...
(gdb) PASS: gdb.base/with.exp: basics: show language
with language ada -- print g_s^M
'g_s' has unknown type; cast it to its declared type^M
(gdb) FAIL: gdb.base/with.exp: basics: with language ada -- print g_s
...
This is due to this bit in dw2_map_matching_symbols:
...
if (dwarf2_per_objfile->index_table != nullptr)
{
/* Ada currently doesn't support .gdb_index (see PR24713). We can get
here though if the current language is Ada for a non-Ada objfile
using GNU index. As Ada does not look for non-Ada symbols this
function should just return. */
return;
}
...
While the reasoning in the comment may be sound from language perspective, it
does introduce an inconsistency in gdb behaviour between:
- having a .gdb_index section, and
- having a .gdb_names section, or a partial symtab, or -readnow.
Fix the inconsistency by completing implementation of
dw2_map_matching_symbols.
Tested on x86_64-linux, both with native and target board
cc-with-debug-index.
gdb/ChangeLog:
2020-05-20 Tom de Vries <tdevries@suse.de>
PR symtab/25833
* dwarf2/read.c (dw2_map_matching_symbols): Handle .gdb_index.
gdb/testsuite/ChangeLog:
2020-05-20 Tom de Vries <tdevries@suse.de>
PR symtab/25833
* gdb.base/with-mf-inc.c: New test.
* gdb.base/with-mf-main.c: New test.
* gdb.base/with-mf.exp: New file.
Alan Modra [Tue, 19 May 2020 03:28:59 +0000 (12:58 +0930)] 
PR25993, read of freed memory
ldmain.c:add_archive_element copies file name pointers from the bfd to
a lang_input_statement_type.
input->filename = abfd->filename;
input->local_sym_name = abfd->filename;
This results in stale pointers when twiddling the bfd filename in
places like the pe ld after_open. So don't free the bfd filename,
and make copies using bfd_alloc memory that won't result in small
memory leaks that annoy memory checkers.
PR 25993
bfd/
* archive.c (_bfd_get_elt_at_filepos): Don't strdup filename,
use bfd_set_filename.
* elfcode.h (_bfd_elf_bfd_from_remote_memory): Likewise.
* mach-o.c (bfd_mach_o_fat_member_init): Likewise.
* opncls.c (bfd_fopen, bfd_openstreamr, bfd_openr_iovec, bfd_openw),
(bfd_create): Likewise.
(_bfd_delete_bfd): Don't free filename.
(bfd_set_filename): Copy filename param to bfd_alloc'd memory,
return pointer to the copy or NULL on alloc fail.
* vms-lib.c (_bfd_vms_lib_get_module): Free newname and test
result of bfd_set_filename.
* bfd-in2.h: Regenerate.
gdb/
* solib-darwin.c (darwin_bfd_open): Don't strdup pathname for
bfd_set_filename.
* solib-aix.c (solib_aix_bfd_open): Use std::string for name
passed to bfd_set_filename.
* symfile-mem.c (add_vsyscall_page): Likewise for string
passed to symbol_file_add_from_memory.
(symbol_file_add_from_memory): Make name param a const char* and
don't strdup.
ld/
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Don't copy
other_bfd_filename for bfd_set_filename, and test result of
bfd_set_filename call. Don't create a new is->filename, simply
copy from bfd filename. Free new_name after bfd_set_filename.
* emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise.
GDB Administrator [Wed, 20 May 2020 00:00:07 +0000 (00:00 +0000)] 
Automatic date update in version.in
Peter Bergner [Tue, 19 May 2020 23:09:51 +0000 (18:09 -0500)] 
Power10 dcbf, sync, and wait extensions.
opcodes/
* ppc-opc.c (insert_ls, extract_ls): Handle 3-bit L fields and new
WC values on POWER10 sync, dcbf and wait instructions.
(insert_pl, extract_pl): New functions.
(L2OPT, LS, WC): Use insert_ls and extract_ls.
(LS3): New , 3-bit L for sync.
(LS3, L3OPT): New, 3-bit L for sync and dcbf.
(SC2, PL): New, 2-bit SC and PL for sync and wait.
(XWCPL_MASK, XL3RT_MASK, XSYNCLS_MASK): New instruction masks.
(XOPL3, XWCPL, XSYNCLS): New opcode macros.
(powerpc_opcodes) <dcbflp, dcbfps, dcbstps pause_short, phwsync,
plwsync, stcisync, stncisync, stsync, waitrsv>: New extended mnemonics.
<wait>: Enable PL operand on POWER10.
<dcbf>: Enable L3OPT operand on POWER10.
<sync>: Enable SC2 operand on POWER10.
gas/
* testsuite/gas/ppc/power9.s <dcbf, dcbfl, dcbflp>: Add tests.
* testsuite/gas/ppc/power9.d: Likewise.
* testsuite/gas/ppc/power10.s <dcbf, dcbfps, dcbstps, hwsync, lwsync,
pause_short, phwsync, plwsync, ptesync, stcisync, stncisync, stsync,
sync, wait, waitrsv>: Add tests.
* testsuite/gas/ppc/power10.d: Likewise.
Alan Modra [Tue, 19 May 2020 22:25:56 +0000 (07:55 +0930)]
PR26011, excessive memory allocation with fuzzed reloc sections
Check sizes early, before users of slurp_relocs allocate buffers for
the swapped in relocs.
PR 26011
* elf.c (_bfd_elf_get_reloc_upper_bound): Sanity check reloc
section size against file size.
(_bfd_elf_get_dynamic_reloc_upper_bound): Likewise.
Alan Modra [Tue, 19 May 2020 22:29:00 +0000 (07:59 +0930)]
Use bfd_get_filename throughout gdb
This patch makes gdb use the inline accessor for all bfd->filename
read accesses.
* coff-pe-read.c (read_pe_exported_syms): Use bfd_get_filename
rather than accessing bfd->filename directly.
* dtrace-probe.c (dtrace_static_probe_ops::get_probes): Likewise,
and use bfd_section_name.
* dwarf2/frame.c (decode_frame_entry): Likewise.
* exec.c (exec_set_section_address): Likewise.
* solib-aix.c (solib_aix_bfd_open): Likewise.
* stap-probe.c (get_stap_base_address): Likewise.
* symfile.c (reread_symbols): Likewise.
Tom Tromey [Tue, 19 May 2020 19:41:03 +0000 (13:41 -0600)] 
Restore missing Rust test
An earlier patch inadvertently broke a Rust test. This restores it.
gdb/testsuite/ChangeLog
2020-05-19 Tom Tromey <tromey@adacore.com>
* gdb.rust/simple.exp: Restore missing test result.
Tom de Vries [Tue, 19 May 2020 18:48:53 +0000 (20:48 +0200)]
[gdb/testsuite] Fix typo in gdb.base/gdb-caching-proc.exp
Fix intial -> initial typo.
gdb/testsuite/ChangeLog:
2020-05-19 Tom de Vries <tdevries@suse.de>
* gdb.base/gdb-caching-proc.exp: Fix typo.
Tom Tromey [Tue, 19 May 2020 18:27:19 +0000 (12:27 -0600)]
Fix duplicate tests in gdb.rust
gdb.rust complains about some duplicate test names. This patch fixes
this in a straightforward way.
2020-05-19 Tom Tromey <tromey@adacore.com>
* gdb.rust/simple.exp: Add some test descriptions.
(test_one_slice): Use with_test_prefix.
Tom Tromey [Tue, 19 May 2020 18:34:35 +0000 (12:34 -0600)]
Update call to target_fileio_open
An earlier patch changed target_fileio_open, but missed a caller.
This patch fixes it.
2020-05-19 Tom Tromey <tromey@adacore.com>
* sparc64-tdep.c (adi_tag_fd): Update call to target_fileio_open.
Simon Marchi [Tue, 19 May 2020 18:20:23 +0000 (14:20 -0400)] 
gdb: fix off-by-one error in quirk_rust_enum
Found by inspection, so I don't have a test for it (I don't think it
would be easy to have this bug cause a failure reliably).
We allocate space for N fields into `new_fields`, then memcpy N fields
at `new_fields + 1`. This overflows the allocated buffer by one field.
Fix it by allocating `N + 1` fields.
gdb/ChangeLog:
* dwarf2/read.c (quirk_rust_enum): Allocate enough fields.
Pedro Alves [Tue, 19 May 2020 17:36:24 +0000 (18:36 +0100)] 
Make exec-file-mismatch compare build IDs
The patch makes GDB do exec-file-mismatch validation by comparing
build IDs instead of the current method of comparing filenames.
Currently, the exec-file-mismatch feature simply compares filenames to
decide whether the exec file loaded in gdb and the exec file the
target reports is running match. This causes false positives when
remote debugging, because it'll often be the case that the paths in
the host and the target won't match. And of course misses the case of
the files having the same name but being actually different files
(e.g., different builds).
This also broke many testcases when running against gdbserver, causing
tests to be skipped like (here native-extended-gdbserver):
(gdb) run
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n) UNTESTED: gdb.base/argv0-symlink.exp: could not run to main
or to fail like (here native-gdbserver):
(gdb) spawn /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/../../gdbserver/gdbserver --once localhost:2346 /home/pedro/gdb/binutils-gdb/build/gdb/te
stsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
Process /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x created; pid = 20040
Listening on port 2346
target remote localhost:2346
Remote debugging using localhost:2346
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/temp/19968/skip_btrace_tests-19968.x
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x"? (y or n) Quit
(gdb) UNSUPPORTED: gdb.btrace/buffer-size.exp: target does not support record-btrace
The former case is about GDB not realizing the two files are the same,
because one of the them is a symlink to the other. The latter case is
about GDB realizing that one file is a copy of the other.
Over the years, the toolchain has settled on build ID matching being
the canonical method to match core dumps to executables, and
executables with no debug info to their debug info.
This patch makes us use build IDs to match the running image of a
binary with its version loaded in gdb, which may or may not have debug
info. This is very much like the core dump/executable matching.
The change to gdb_bfd_open is necessary to get rid of the "transfers
from remote targets can be slow" warning when we open the remote file
to read its build ID:
(gdb) r
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
Reading /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n)
While trying this out, I was worried that bfd would read a lot of
stuff from the binary in order to extract the build ID, making it
potentially slow, but turns out we don't read all that much. Maybe a
couple hundred bytes, and most of it seemingly is the read-ahead
cache. So I'm not worried about that. Otherwise I'd consider whether
a new qXfer:buildid:read would be better. But I'm happy that we
seemingly don't need to worry about it.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* NEWS (set exec-file-mismatch): Adjust entry.
* exec.c: Include "build-id.h".
(validate_exec_file): Try to match build IDs instead of filenames.
* gdb_bfd.c (struct gdb_bfd_open_closure): New.
(gdb_bfd_iovec_fileio_open): Adjust to use gdb_bfd_open_closure
and pass down 'warn_if_slow'.
(gdb_bfd_open): Add 'warn_if_slow' parameter. Use
gdb_bfd_open_closure to pass it down.
* gdb_bfd.h (gdb_bfd_open): Add 'warn_if_slow' parameter.
gdb/doc/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Attach): Update exec-file-mismatch description to
mention build IDs.
(Separate Debug Files): Add "build id" anchor.
Pedro Alves [Tue, 19 May 2020 17:36:24 +0000 (18:36 +0100)]
Eliminate target_fileio_open_warn_if_slow
This basically makes target_fileio_open_1 extern, renamed to
target_fileio_open, and eliminates the current
target_fileio_open_warn_if_slow and target_fileio_open.
A following parameter will want to change gdb_bfd_iovec_fileio_open,
the only caller of target_fileio_open_warn_if_slow, to pass down
"warn_if_slow" true/false from the caller, instead of hardcoding
"warn_if_slow" true.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb_bfd.c (gdb_bfd_iovec_fileio_open): Adjust.
* target.c (target_fileio_open_1): Rename to target_fileio_open
and make extern. Use bool.
(target_fileio_open, target_fileio_open_warn_if_slow): Delete.
(target_fileio_read_alloc_1): Adjust.
* target.h (target_fileio_open): Add 'warn_if_slow' parameter.
(target_fileio_open_warn_if_slow): Delete declaration.
Pedro Alves [Tue, 19 May 2020 17:36:24 +0000 (18:36 +0100)]
Default gdb_bfd_open's fd parameter to -1
A following patch will add one more defaulted parameter.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb_bfd.h: (gdb_bfd_open): Default to 'fd' parameter to -1.
Adjust all callers.
Yoshinori Sato [Tue, 19 May 2020 17:33:08 +0000 (13:33 -0400)] 
gdb: fix -Wtautological-overlap-compare error in h8300-tdep.c
Compiling with clang 11 gives us:
CXX h8300-tdep.o
/home/smarchi/src/binutils-gdb/gdb/h8300-tdep.c:225:21: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare]
if (disp < 0 && disp > 0xffffff)
~~~~~~~~~^~~~~~~~~~~~~~~~~~
/home/smarchi/src/binutils-gdb/gdb/h8300-tdep.c:203:17: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare]
if (disp < 0 && disp > 0xffffff)
~~~~~~~~~^~~~~~~~~~~~~~~~~~
/home/smarchi/src/binutils-gdb/gdb/h8300-tdep.c:184:17: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare]
if (disp < 0 && disp > 0xffffff)
~~~~~~~~~^~~~~~~~~~~~~~~~~~
Indeed, disp (of type LONGEST) can't be less than 0 and greater than
0xffffff.
Fix it by changing the way we check if disp is negative. Check the sign
bit of disp, which is a 24-bit number.
gdb/ChangeLog:
* h8300-tdep.c (h8300_is_argument_spill): Change how we check
whether disp is negative.
Gunther Nikl [Tue, 19 May 2020 16:32:26 +0000 (17:32 +0100)] 
Fix thinko in recent update to bfd_section_from_shdr.
PR 26005
* elf.c (bfd_section_from_shdr): Replace bfd_malloc + memset with
bfd_zmalloc to allocate memory for the sections_being_created array.
Simon Marchi [Tue, 19 May 2020 16:18:05 +0000 (12:18 -0400)]
gdb: make symfile_segment_data::segment_info an std::vector
Change the symfile_segment_data::segment_info array to be an
std::vector. No functional changes are expected.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data)
<~symfile_segment_data>: Remove.
<segment_info>: Change to std::vector.
* symfile.c (default_symfile_segments): Update.
* elfread.c (elf_symfile_segments): Update.
Simon Marchi [Tue, 19 May 2020 16:18:04 +0000 (12:18 -0400)]
gdb: use std::vector to store segments in symfile_segment_data
Instead of maintaining two vectors, I added a small `segment` class
which holds both the base address and size of one segment and replaced
the two `segment_bases` and `segment_sizes` arrays with a single vector.
The rest of the changes are straightforward, no behavior changes are
expected.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data) <struct segment>: New.
<segments>: New.
<segment_bases, segment_sizes>: Remove.
* symfile.c (default_symfile_segments): Update.
* elfread.c (elf_symfile_segments): Update.
* remote.c (remote_target::get_offsets): Update.
* solib-target.c (solib_target_relocate_section_addresses):
Update.
Simon Marchi [Tue, 19 May 2020 16:18:04 +0000 (12:18 -0400)]
gdb: allocate symfile_segment_data with new
- Allocate this structure with new instead of XNEW, use a unique pointer
to manage its lifetime.
- Change a few functions to return a unique pointer instead of a
plain pointer.
- Change free_symfile_segment_data to be symfile_segment_data's
destructor.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data): Initialize fields.
<~symfile_segment_data>: Add.
(symfile_segment_data_up): New.
(struct sym_fns) <sym_segments>: Return a
symfile_segment_data_up.
(default_symfile_segments): Return a symfile_segment_data_up.
(free_symfile_segment_data): Remove.
(get_symfile_segment_data): Return a symfile_segment_data_up.
* symfile.c (default_symfile_segments): Likewise.
(get_symfile_segment_data): Likewise.
(free_symfile_segment_data): Remove.
(symfile_find_segment_sections): Update.
* elfread.c (elf_symfile_segments): Return a
symfile_segment_data_up.
* remote.c (remote_target::get_offsets): Update.
* solib-target.c (solib_target_relocate_section_addresses):
Update.
* symfile-debug.c (debug_sym_segments): Return a
symfile_segment_data_up.
H.J. Lu [Tue, 19 May 2020 15:47:12 +0000 (16:47 +0100)] 
Allow readelf to issue warnings if checking is enabled and there are discrepancies between the dynamic tags and the dynamic sections.
PR binutils/25809
* readelf.c (process_program_headers): Warn if the PT_DYNAMIC
segment doesn't match the .dynamic section and checks are
enabled.
(struct filedata): Add dynamic_symtab_section and
dynamic_strtab_section fields.
(process_section_headers): Set dynamic_symtab_section to the
.dynsym section. Set dynamic_strtab_section to the .dynstr
section.
(process_dynamic_section): Warn if the .dynsym section doesn't
match DT_SYMTAB and DT_SYMENT or the .dynstr section doesn't
DT_STRTAB and DT_STRSZ. But only if checks are enabled.
Stafford Horne [Tue, 19 May 2020 13:26:33 +0000 (14:26 +0100)] 
OpenRISC BFD fixups for Glibc:
or1k: Fix static linking when with .rela.got relocations
or1k: Fix dynamic TLS symbol flag
or1k: Add TLS mask to handle multiple model access
or1k: Fix issue with multiple PCREL relocations
or1k: TLS offset to use tcb size and section alignment
or1k: refactor: Rename p to sec_relocs
or1k: refactor: Rename s to sgot and splt
or1k: Add dynamic flag to tpoff
bfd * elf32-or1k.c (or1k_elf_finish_dynamic_symbol): Rename srela
to relgot.
(or1k_elf_relocate_section): Access srelgot via
htab->root.srelgot. Add assertions for srelgot->contents.
Introduce local variable for srelgot to not reuse global
sreloc.
(or1k_elf_relocate_section): Fixup dynamic symbol detection.
(or1k_set_got_and_rela_sizes): New function.
(or1k_initial_exec_offset): New function.
(TLS_GD, TLS_IE, TLS_LD, TLS_LE): Redefine macros as masks.
(or1k_elf_relocate_section): Allow for TLS to handle multiple
model access.
(or1k_elf_check_relocs): Use OR to set TLS access.
(allocate_dynrelocs): Use or1k_set_got_and_rela_sizes to set
sizes.
(or1k_elf_size_dynamic_sections): Use
or1k_set_got_and_rela_sizes to set sizes.
(or1k_elf_relocate_section): Fixup PCREL relocation calculation.
(TCB_SIZE): New macro.
(tpoff): Use TCB_SIZE and alignment to calculate offset.
(allocate_dynrelocs, readonly_dynrelocs, or1k_elf_check_relocs)
(or1k_elf_size_dynamic_sections): Rename p to sec_relocs.
(allocate_dynrelocs): Rename s to splt or sgot based on usage.
(tpoff): Add dynamic boolean argument.
(or1k_elf_relocate_section): Pass dynamic flag to tpoff.
Alexander Fedotov [Tue, 19 May 2020 11:45:42 +0000 (12:45 +0100)] 
Fix the ARM assembler to generate a Realtime profile for armv8-r.
PR 25992
gas * config/tc-arm.c : Add arm_ext_v8r feature.
(it_fsm_post_encode): Check arm_ext_v8r feature.
(get_aeabi_cpu_arch_from_fset): Check arm_ext_v8r feature.
include * opcode/arm.h (ARM_EXT2_V8R): Define. Modified ARM_AEXT2_V8R.
Stafford Horne [Tue, 19 May 2020 11:40:27 +0000 (20:40 +0900)]
or1k: Regenerate opcodes after removing 32-bit support
opcodes/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
PR 25184
* or1k-asm.c: Regenerate.
* or1k-desc.c: Regenerate.
* or1k-desc.h: Regenerate.
* or1k-dis.c: Regenerate.
* or1k-ibld.c: Regenerate.
* or1k-opc.c: Regenerate.
* or1k-opc.h: Regenerate.
* or1k-opinst.c: Regenerate.
Stafford Horne [Tue, 19 May 2020 11:40:27 +0000 (20:40 +0900)]
or1k: Remove 64-bit support, it's not used and it breaks 32-bit hosts
Reported by Rich Felker when building on 32-bit hosts. Backwards jump
negative offsets were not calculated correctly due to improper 32-bit
to 64-bit zero-extension. The 64-bit fields are present because we
are mixing 32-bit and 64-bit architectures in our cpu descriptions.
Removing 64-bit fixes the issue. We don't use 64-bit, there is an architecture
spec for 64-bit but no implementations or simulators. My thought is if
we need them in the future we should do the proper work to support both
32-bit and 64-bit implementations co-existing then.
cpu/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
PR 25184
* or1k.cpu (arch or1k): Remove or64 and or64nd machs.
(ORBIS-MACHS, ORFPX32-MACHS): Remove pmacros.
(cpu or1k64bf, mach or64, mach or64nd): Remove definitions.
* or1kcommon.cpu (h-fdr): Remove hardware.
* or1korfpx.cpu (rDDF, rADF, rBDF): Remove operand definitions.
(float-regreg-insn): Remove lf- mnemonic -d instruction pattern.
(float-setflag-insn-base): Remove lf-sf mnemonic -d pattern.
(float-cust-insn): Remove "lf-cust" cust-num "-d" pattern.
(lf-rem-d, lf-itof-d, lf-ftoi-d, lf-madd-d): Remove.
Siddhesh Poyarekar [Tue, 19 May 2020 10:07:52 +0000 (11:07 +0100)] 
[PATCH v3] aarch64: Emit jump slot for conditional branch to undefined symbols
The linker silently writes out a conditional branch to 0 if the
target symbol in R_AARCH64_CONDBR19 or R_AARCH64_TSTBR14 relocations is
undefined. Emit a PLT instead so that behaviour is the same for these
relocations as the llvm linker.
The special behaviour for undefined weak symbols, where conditional
branches to such symbols result in a branch unto themselves, has been
retained. This is because the weak-undefined.s test explicitly checks
for that, leading me to conclude that it's expected behaviour.
bfd * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Club
BFD_RELOC_AARCH64_BRANCH19 and BFD_RELOC_AARCH64_TSTBR14
cases with BFD_RELOC_AARCH64_JUMP26.
(elfNN_aarch64_check_relocs): Likewise.
ld * testsuite/ld-aarch64/aarch64-elf.exp: New test
emit-relocs-560.
* testsuite/ld-aarch64/emit-relocs-560.d: New file.
* testsuite/ld-aarch64/emit-relocs-560.s: New file.
Alan Modra [Tue, 19 May 2020 03:27:15 +0000 (12:57 +0930)]
Use bfd_get_filename throughout ld
* emultempl/beos.em (sort_by_file_name): Use bfd_get_filename
rather than accessing bfd->filename directly.
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise.
* emultempl/spuelf.em (embedded_spu_file): Likewise.
* ldlang.c (input_statement_is_archive_path, wild_sort),
(check_excluded_libs): Likewise.
* ldmain.c (add_archive_element): Likewise.
* ldmisc.c (vfinfo): Likewise.
* pe-dll.c (auto_export, generate_edata, pe_create_import_fixup),
(pe_dll_generate_implib, pe_process_import_defs): Likewise.
* plugin.c (plugin_object_p): Likewise.
Alan Modra [Tue, 19 May 2020 03:25:27 +0000 (12:55 +0930)]
Use bfd_get_filename throughout gas
* write.c (write_contents): Use bfd_get_filename rather than
accessing bfd->filename directly. Use bfd_section_name rather
than accessing section->name directly.
Alan Modra [Tue, 19 May 2020 03:05:56 +0000 (12:35 +0930)]
Use bfd_get_filename throughout binutils
* ar.c (map_over_members, get_pos_bfd, delete_members, move_members),
(replace_members): Use bfd_get_filename rather than accessing
bfd->filename directly.
* arsup.c (map_over_list, ar_delete, ar_replace, ar_extract): Likewise.
* binemul.c (do_ar_emul_append): Likewise.
* coffgrok.c (coff_grok): Likewise.
Alan Modra [Tue, 19 May 2020 03:05:03 +0000 (12:35 +0930)]
Use bfd_get_filename throughout bfd
* aix5ppc-core.c (xcoff64_core_file_matches_executable_p): Use
bfd_get_filename rather than accessing bfd->filename directly.
* aout-target.h (MY (object_p)): Likewise.
* aoutx.h (aout_find_nearest_line, aout_link_write_symbols): Likewise.
* archive.c (find_nested_archive, _bfd_generic_read_ar_hdr_mag),
(_bfd_construct_extended_name_table, _bfd_bsd44_write_ar_hdr),
(_bfd_archive_bsd44_construct_extended_name_table),
(_bfd_write_archive_contents, _bfd_compute_and_write_armap),
(_bfd_bsd_write_armap): Likewise.
* bfd.c (bfd_errmsg, _bfd_doprnt): Likewise.
* cache.c (bfd_open_file): Likewise.
* ecoff.c (_bfd_ecoff_write_armap): Likewise.
* ecofflink.c (bfd_ecoff_debug_accumulate_other): Likewise.
* elf32-bfin.c (bfinfdpic_relocate_section): Likewise.
* elf32-frv.c (elf32_frv_relocate_section): Likewise.
* elf32-hppa.c (elf32_hppa_final_link): Likewise.
* elf32-nds32.c (nds32_elf_output_symbol_hook),
(patch_tls_desc_to_ie): Likewise.
* elf32-spu.c (sort_bfds, print_one_overlay_section),
(spu_elf_auto_overlay): Likewise.
* elf64-hppa.c (elf_hppa_final_link): Likewise.
* elf64-ia64-vms.c (elf64_ia64_size_dynamic_sections): Likewise.
* elfcore.h (elf_core_file_matches_executable_p): Likewise.
* elflink.c (bfd_elf_size_dynamic_sections),
(elf_link_input_bfd): Likewise.
* linker.c (_bfd_generic_link_output_symbols): Likewise.
* mach-o.c (bfd_mach_o_follow_dsym),
(bfd_mach_o_close_and_cleanup): Likewise.
* opncls.c (_bfd_delete_bfd, _maybe_make_executable),
(find_separate_debug_file, get_build_id_name): Likewise.
* pdp11.c (aout_find_nearest_line, aout_link_write_symbols): Likewise.
* plugin.c (bfd_plugin_open_input): Likewise.
* rs6000-core.c (rs6000coff_core_file_matches_executable_p): Likewise.
* som.c (som_write_armap): Likewise.
* srec.c (srec_write_record, srec_write_symbols): Likewise.
* vms-lib.c (_bfd_vms_lib_get_imagelib_file),
(_bfd_vms_lib_write_archive_contents): Likewise.
* xcofflink.c (xcoff_link_add_dynamic_symbols): Likewise.
Alan Modra [Mon, 18 May 2020 05:00:06 +0000 (14:30 +0930)] 
Clear all local_symbol.lsy_flags
* symbols.c (local_symbol_make): Init all of lsy_flags.
Alan Modra [Mon, 18 May 2020 23:20:32 +0000 (08:50 +0930)]
win32 typo fix
PR 25713
* bfdio.c (_bfd_real_fopen): Typo fix.
GDB Administrator [Tue, 19 May 2020 00:00:17 +0000 (00:00 +0000)]
Automatic date update in version.in
Rainer Orth [Mon, 18 May 2020 15:59:43 +0000 (17:59 +0200)] 
Avoid short i386 register names on Solaris/x86 [PR25981]
This is the 32-bit companion to
Remove unused ps_lgetLDT etc. on Solaris/x86 [PR25981]
https://sourceware.org/pipermail/gdb-patches/2020-May/168713.html
A 32-bit-default gdb fails to compile with the updated <sys/regset.h>.
While it is also affected by the lack of a GS definition, which the
compantion patch above fixes, it also fails to compile i386-sol2-nat.c like
this
/vol/src/gnu/gdb/hg/master/git/gdb/i386-sol2-nat.c:181:3: error: 'EAX' was not declared in this scope
181 | EAX, ECX, EDX, EBX,
| ^~~
and several more.
While this could be fixed by either including <ucontext.h> here or
provding fallback definitions of the register macros, I chose to do what
the 64-bit-default code in the same file
(amd64_sol2_gregset32_reg_offset[]) does, namely just hardcode the
numeric values instead. They are part of the ABI and thus guaranteed
not to change.
With this patch, a i386-pc-solaris2.11 configuration on master compiles
again, however, it doesn't work. However, I could successfully test it
on the gdb-9 branch.
Compiling and testing proved to be messy, unfortunately:
* For one, Solaris <sys/procfs.h> and largefile support used to be
mutually exclusive (fixed in Solaris 11.4 and Illumos), which was
exacerbated by the fact that g++ predefines _FILE_OFFSET_BITS=64 since
GCC 9.1.0. For now I've worked around this by adding
-U_FILE_OFFSET_BITS to CXXFLAGS and configuring with
--disable-largefile. I hope to clean this up in a future patch.
* gdb still defaults to startup-with-shell on. However, /bin/bash is a
64-bit executable which cannot be debugged by a 32-bit gdb. I hacked
around that part by pointing $SHELL at a 32-bit bash before running
make check.
PR build/25981
* i386-sol2-nat.c [PR_MODEL_NATIVE != PR_MODEL_LP64] (regmap):
Hardcode register numbers.
Rainer Orth [Mon, 18 May 2020 15:56:00 +0000 (17:56 +0200)]
Remove unused ps_lgetLDT etc. on Solaris/x86 [PR25981]
As reported in PR build/25981, a future Solaris 11.4 update will soon
remove the short i386 register names like SS etc. from <sys/regset.h>.
They could leak into user code (e.g. via <signal.h> -> <sys/signal.h> ->
<sys/ucontext.h>) and pollute the user namespace. Affected code would
have a hard time avoiding the issue: LLVM is one of those.
While the short names are required to be present by the i386 psABI, that
document only demands that they exist in <ucontext.h>, which is what the
upcoming update assures.
With this change, in a 64-bit-default configuration, procfs.c fails to
compile on Solaris/x86:
/vol/src/gnu/gdb/hg/master/git/gdb/procfs.c: In function 'ssd* procfs_find_LDT_entry(ptid_t)':
/vol/src/gnu/gdb/hg/master/git/gdb/procfs.c:1643:18: error: 'GS' was not declared in this scope
1643 | key = (*gregs)[GS] & 0xffff;
| ^~
make[2]: *** [Makefile:1607: procfs.o] Error 1
Initially I meant to provide a definition using the planned replacement
macro, but closer inspection revealed a better way. procfs_find_LDT_entry
and its helper proc_get_LDT_entry are only used to implement ps_lgetLDT,
one of the callback functions required by libthread_db.so.1
(cf. <proc_service.h>). While that function is still documented as being
required even in Solaris 11.4, I found that calls to it had been removed
long ago in Solaris 9, so just removing the three functions above is the
easiest fix.
The following patch does just that. It compiled successfully on
amd64-pc-solaris2.11, however, as reported in PR gdb/25939, master is
completely broken on Solaris since the multi-target patch. The patch
applies cleanly to the gdb-9 branch and there I could test it
successfully.
PR build/25981
* procfs.c [(__i386__ || __x86_64__) && sun] (proc_get_LDT_entry,
procfs_find_LDT_entry): Remove.
* procfs.h [(__i386__ || __x86_64__) && sun] (struct ssd,
procfs_find_LDT_entry): Remove.
* sol-thread.c [(__i386__ || __x86_64__) && sun] (ps_lgetLDT):
Remove.
Nick Clifton [Mon, 18 May 2020 14:52:03 +0000 (15:52 +0100)]
Fix a use-after-free bug in the BFD library when scanning a corrupt ELF file.
PR 26005
* elf.c (bfd_section_from_shdr): Use bfd_malloc to allocate memory
for the sections_being_created array.
Tom de Vries [Mon, 18 May 2020 14:33:37 +0000 (16:33 +0200)]
[gdb/testsuite] Use with_test_prefix in gdb.base/gdb-caching-proc.exp
When running test-case gdb.base/gdb-caching-proc.exp all passes are unique,
but fails might not be.
Fix this by using with_test_prefix.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-18 Tom de Vries <tdevries@suse.de>
* gdb.base/gdb-caching-proc.exp: Use with_test_prefix.
Douglas B Rupp [Mon, 18 May 2020 11:59:53 +0000 (21:29 +0930)] 
Show AIX gc'd symbol address adjustments in map file
* ldemul.h (ldemul_print_symbol): New.
(ld_emulation_xfer_type) <print_symbol): Likewise.
* ldemul.c (ldemul_print_symbol): New.
* ldlang.c (SECTION_NAME_MAP_LANGTH): Move to ...
(print_one_symbol): Make global and move declaration to ...
(print_all_symbols): Rename print_one_symbol to ldemul_print_symbol
(print_input_section): Likewise
* ldlang.h: ... here.
* emultempl/aix.em (gld${EMULATION_NAME}_print_symbol): New.
(ld_emulation_xfer_struct): Use it.
* emultempl/armcoff.em (ld_emulation_xfer_struct): Add print_symbol
and default to NULL.
* emultempl/beos.em (ld_emulation_xfer_struct): Likewise
* emultempl/elf.em (ld_emulation_xfer_struct): Likewise
* emultempl/generic.em (ld_emulation_xfer_struct): Likewise
* emultempl/linux.em (ld_emulation_xfer_struct): Likewise
* emultempl/msp430.em (ld_emulation_xfer_struct): Likewise
* emultempl/pe.em (ld_emulation_xfer_struct): Likewise
* emultempl/pep.em (ld_emulation_xfer_struct): Likewise
* emultempl/ticoff.em (ld_emulation_xfer_struct): Likewise
* emultempl/vanilla.em (ld_emulation_xfer_struct): Likewise
Sergei Trofimovich [Mon, 18 May 2020 12:51:23 +0000 (13:51 +0100)] 
[PATCH] ld: fix s/claimi/claim/ typo
* ldmain.c (add_archive_element): Fix s/claimi/claim/ typo
in info message.
Nick Clifton [Mon, 18 May 2020 12:47:11 +0000 (13:47 +0100)]
Updated translations for the gprof and ld sub-directories
Alan Modra [Mon, 18 May 2020 11:14:30 +0000 (20:44 +0930)]
ECOFF slurp_relocs thinko
In git commit
806470a219 I swapped the order of internal vs. external
relocs memory allocation in ecoff_slurp_reloc_table, the idea being
that the external reloc size can be sanity checked against file size.
However, that fails badly with bfd_alloc memory where releasing any
block also releases all more recently allocated blocks.
* ecoff.c (ecoff_slurp_reloc_table): Malloc external_relocs so
they can be freed without also freeing internal_relocs.
Jaydeep Chauhan [Mon, 18 May 2020 10:36:26 +0000 (11:36 +0100)] 
Fix the BFD library to handle Windows pathnames with more than 260 characters and UNIX style directory separators.
PR 25713
* bfdio.c (_bfd_real_fopen): Convert UNIX style sirectory
separators into DOS style when creating a WIN32 fullpath.
Nick Clifton [Mon, 18 May 2020 09:28:52 +0000 (10:28 +0100)]
Prevent a potential use-after-fee memory corruption bug in the linker (for PE format files).
PR 25993
* emultempl/pe.em (_after_open): Check for duplicate filename
pointers before renaming the dll.
* emultempl/pep.em (_after_open): Likewise.
Alan Modra [Mon, 18 May 2020 04:00:59 +0000 (13:30 +0930)]
Re: Fix tight loop on recursively-defined symbols
sy_resolving ought to not be set for a struct local_symbol, but it is
apparent from local_symbol_make that the field is not initialised.
* symbols.c (resolve_symbol_value): Invoke LOCAL_SYMBOL_CHECK
before looking at add_symbol->sy_flags.sy_resolving.
liuhongt [Sat, 9 May 2020 07:02:50 +0000 (15:02 +0800)] 
Don't handle lret/iret when -mlfence-before-ret=[or|not|shl|yes] since they are invalid in SGX enclaves.
gas/ChangeLog
* gas/config/tc-i386.c: Not handle lret/iret.
* gas/testsuite/gas/i386/lfence-ret-a.d: Adjust testcase.
* gas/testsuite/gas/i386/lfence-ret-b.d: Ditto.
* gas/testsuite/gas/i386/lfence-ret-c.d: Ditto.
* gas/testsuite/gas/i386/lfence-ret-d.d: Ditto.
* gas/testsuite/gas/i386/lfence-ret.s: Ditto.
* gas/testsuite/gas/i386/x86-64-lfence-ret-a.d: Ditto.
* gas/testsuite/gas/i386/x86-64-lfence-ret-b.d: Ditto.
* gas/testsuite/gas/i386/x86-64-lfence-ret-c.d: Ditto.
* gas/testsuite/gas/i386/x86-64-lfence-ret-d.d: Ditto.
* gas/testsuite/gas/i386/x86-64-lfence-ret-e.d: Ditto.
* gas/testsuite/gas/i386/x86-64-lfence-ret.s: Ditto.
* gas/testsuite/gas/i386/x86-64-lfence-ret.e: Deleted.
GDB Administrator [Mon, 18 May 2020 00:00:14 +0000 (00:00 +0000)]
Automatic date update in version.in
Stafford Horne [Sun, 17 May 2020 20:27:13 +0000 (05:27 +0900)]
binutils: Add myself as maintainer for OpenRISC
binutils/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* MAINTAINERS (OR1K): Add myself as maintainer.
Pedro Alves [Sun, 17 May 2020 18:17:56 +0000 (19:17 +0100)]
Stop considering hw and sw breakpoint locations duplicates (PR gdb/25741)
In the following conditions:
- A target with hardware breakpoints available, and
- A target that uses software single stepping,
- An instruction at ADDRESS loops back to itself,
Now consider the following steps:
1. The user places a hardware breakpoint at ADDRESS (an instruction
that loops to itself),
2. The inferior runs and hits the breakpoint at ADDRESS,
3. The user tells GDB to 'continue'.
In #3 when the user tells GDB to continue, GDB first disables the
hardware breakpoint at ADDRESS, and then inserts a software
single-step breakpoint at ADDRESS. The original user-created
breakpoint was a hardware breakpoint, while the single-step breakpoint
will be a software breakpoint.
GDB continues and immediately hits the software single-step
breakpoint.
GDB then deletes the software single-step breakpoint by calling
delete_single_step_breakpoints, which eventually calls
delete_breakpoint, which, once the breakpoint (and its locations) are
deleted, calls update_global_location_list.
During update_global_location_list GDB spots that we have an old
location (the software single step breakpoint location) that is
inserted, but being deleted, and a location (the original hardware
breakpoint) at the same address which we are keeping, but which is not
currently inserted, GDB then calls breakpoint_locations_match on these
two locations.
Currently the locations do match, and so GDB calls swap_insertion
which swaps the "inserted" state of the two locations. The user
created hardware breakpoint is marked as inserted, while the GDB
internal software single step breakpoint is now marked as not
inserted. After this GDB returns through the call stack and leaves
delete_single_step_breakpoints.
After this GDB continues with its normal "stopping" process, as part
of this stopping process GDB removes all the breakpoints from the
target. Due to the swap it is now the user-created hardware
breakpoint that is marked as inserted, so it is this breakpoint GDB
tries to remove.
The problem is that GDB inserted the software single-step breakpoint
as a software breakpoint, but is now trying to remove the hardware
breakpoint. The problem is removing a software breakpoint is very
different to removing a hardware breakpoint, this could result is some
undetected undefined behaviour, or as in the original bug report (PR
gdb/25741), could result in the target throwing an error.
With "set breakpoint always-inserted on", we can easily reproduce this
against GDBserver. E.g.:
(gdb) hbreak main
Sending packet: $m400700,40#28...Packet received: 89e58b....
Sending packet: $m400736,1#fe...Packet received: 48
Hardware assisted breakpoint 1 at 0x400736: file threads.c, line 57.
Sending packet: $Z1,400736,1#48...Packet received: OK
Packet Z1 (hardware-breakpoint) is supported
(gdb) b main
Note: breakpoint 1 also set at pc 0x400736.
Sending packet: $m400736,1#fe...Packet received: 48
Breakpoint 2 at 0x400736: file threads.c, line 57.
(gdb) del
Delete all breakpoints? (y or n) y
Sending packet: $z0,400736,1#67...Packet received: E01
warning: Error removing breakpoint 2
This patch adds a testcase that does exactly that.
Trying to enhance GDB to handle this scenario while continuing to
avoid inserting redundant software and hardware breakpoints at the
same address turns out futile, because, given non-stop and breakpoints
always-inserted, if the user:
#1 - inserts a hw breakpoint, then
#2 - inserts a sw breakpoint at the same address, and then
#3 - removes the original hw breakpoint,
GDB would have to make sure to insert the sw breakpoint before
removing the hw breakpoint, to avoid running threads missing the
breakpoint. I.e., there's always going to be a window where a target
needs to be able to handle both sw and a hw breakpoints installed at
the same address. You can see more detailed description of that issue
here:
https://sourceware.org/pipermail/gdb-patches/2020-April/167738.html
So the fix here is to just stop considering software breakpoints and
hw breakpoints duplicates, and let GDB insert sw and hw breakpoints at
the same address.
The central change is to make breakpoint_locations_match consider the
location's type too. There are several other changes necessary to
actually make that that work correctly, however:
- We need to handle the duplicates detection better. Take a look at
the loop at the tail end of update_global_location_list. Currently,
because breakpoint locations aren't sorted by type, we can end up
with, at the same address, a sw break, then a hw break, then a sw
break, etc. The result is that that second sw break won't be
considered a duplicate of the first sw break. Seems like we already
handle that incorrectly for range breakpoints.
- The "set breakpoint auto-hw on" handling is moved out of
insert_bp_location to update_global_location_list, before the
duplicates determination.
Moving "set breakpoint auto-hw off" handling as well and downgrading
it to a warning+'disabling the location' was considered too, but in
the end discarded, because we want to error out with internal and
momentary breakpoints, like software single-step breakpoints.
Disabling such locations at update_global_location_list time would
make GDB lose control of the inferior.
- In update_breakpoint_locations, the logic of matching old locations
with new locations, in the have_ambiguous_names case, is updated to
still consider sw vs hw locations the same.
- Review all ALL_BP_LOCATIONS_AT_ADDR uses, and update those that
might need to be updated, and update comments for those that don't.
Note that that macro walks all locations at a given address, and
doesn't call breakpoint_locations_match.
The result against GDBserver (with "set breakpoint
condition-evaluation host" to avoid seeing confusing reinsertions) is:
(gdb) hbreak main
Sending packet: $m400736,1#fe...Packet received: 48
Hardware assisted breakpoint 1 at 0x400736: file main.c, line 57.
Sending packet: $Z1,400736,1#48...Packet received: OK
(gdb) b main
Note: breakpoint 1 also set at pc 0x400736.
Sending packet: $m400736,1#fe...Packet received: 48
Breakpoint 4 at 0x400736: file main.c, line 57.
Sending packet: $Z0,400736,1#47...Packet received: OK
(gdb) del 3
Sending packet: $z1,400736,1#68...Packet received: OK
gdb/ChangeLog:
2020-05-17 Pedro Alves <palves@redhat.com>
Andrew Burgess <andrew.burgess@embecosm.com>
Keno Fischer <keno@juliacomputing.com>
PR gdb/25741
* breakpoint.c (build_target_condition_list): Update comments.
(build_target_command_list): Update comments and skip matching
locations.
(insert_bp_location): Move "set breakpoint auto-hw on" handling to
a separate function. Simplify "set breakpoint auto-hw off"
handling.
(insert_breakpoints): Update comment.
(tracepoint_locations_match): New parameter. For breakpoints,
compare location types too, if the caller wants to.
(handle_automatic_hardware_breakpoints): New functions.
(bp_location_is_less_than): Also sort by location type and
hardware breakpoint length.
(update_global_location_list): Handle "set breakpoint auto-hw on"
here.
(update_breakpoint_locations): Ask breakpoint_locations_match to
ignore location types.
gdb/testsuite/ChangeLog:
2020-05-17 Pedro Alves <palves@redhat.com>
PR gdb/25741
* gdb.base/hw-sw-break-same-address.exp: New file.
GDB Administrator [Sun, 17 May 2020 00:00:06 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Sat, 16 May 2020 17:59:10 +0000 (18:59 +0100)]
Fix gdb.multi/multi-re-run.exp with native-gdbserver
The new exec-file-mismatch feature reveals that when running
gdb.multi/multi-re-run.exp against --target_board=native-gdbserver,
we've been starting gdbserver with the wrong program:
(gdb) spawn /home/pedro/brno/pedro/gdb/binutils-gdb/build/gdb/testsuite/../../gdbserver/gdbserver --once localhost:2347 /home/pedro/brno/pedro/gdb/binutils-gdb/build/gdb/te
stsuite/outputs/gdb.multi/multi-re-run/multi-re-run-2
Process /home/pedro/brno/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.multi/multi-re-run/multi-re-run-2 created; pid = 6280
Listening on port 2347
target remote localhost:2347
Remote debugging using localhost:2347
warning: Mismatch between current exec-file /home/pedro/brno/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.multi/multi-re-run/multi-re-run-1
and automatically determined exec-file /home/pedro/brno/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.multi/multi-re-run/multi-re-run-2
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/brno/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.multi/multi-re-run/multi-re-run-2"? (y or n) Quit
(gdb) FAIL: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=1: running to all_started in runto
The problem is that gdb_reload uses the last loaded file as binary to
spawn, but we load the program for inferior 2 and then switch to
inferior 1 and run it, so the last loaded file is the program for
inferior 2.
Fix this by tweaking last_loaded_file.
gdb/testsuite/ChangeLog:
2020-05-16 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-re-run.exp (test_re_run): Switch
LAST_LOADED_FILE accordingly.
Simon Marchi [Sat, 16 May 2020 16:16:06 +0000 (12:16 -0400)]
gdb: remove TYPE_NAME macro
Remove `TYPE_NAME`, changing all the call sites to use `type::name`
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_NAME): Remove. Change all cal sites to use
type::name instead.
Simon Marchi [Sat, 16 May 2020 16:15:54 +0000 (12:15 -0400)]
gdb: add type::name / type::set_name
Add the `name` and `set_name` methods on `struct type`, in order to
remove the `TYPE_NAME` macro. In this patch, the `TYPE_NAME` macro is
changed to use `type::name`, so all the call sites that are used to set
the type name are changed to use `type::set_name`. The next patch will
remove `TYPE_NAME` completely.
gdb/ChangeLog:
* gdbtypes.h (struct type) <name, set_name>: New methods.
(TYPE_CODE): Use type::name. Change all call sites used to set
the name to use type::set_name instead.
Tom Tromey [Sat, 16 May 2020 15:58:45 +0000 (09:58 -0600)] 
Remove ALL_UIS
Continuing my goal of removing the "ALL_*" iterator macros, this
removes ALL_UIS, replacing it with an iterator adaptor.
gdb/ChangeLog
2020-05-16 Tom Tromey <tom@tromey.com>
* top.c (quit_force): Update.
* infrun.c (handle_no_resumed): Update.
* top.h (all_uis): New function.
(ALL_UIS): Remove.
Simon Marchi [Sat, 16 May 2020 15:21:41 +0000 (11:21 -0400)]
gdb: fix -Wtautological-overlap-compare warning in mips-linux-tdep.c
When building with clang 11, I get:
CXX mips-linux-tdep.o
/home/smarchi/src/binutils-gdb/gdb/mips-linux-tdep.c:643:30: error: overlapping comparisons always evaluate to true [-Werror,-Wtautological-overlap-compare]
if (insn != 0x03e07821 || insn != 0x03e07825)
~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
/home/smarchi/src/binutils-gdb/gdb/mips-linux-tdep.c:636:30: error: overlapping comparisons always evaluate to true [-Werror,-Wtautological-overlap-compare]
if (insn != 0x03e0782d || insn != 0x03e07825)
~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
Indeed, given two different values, `insn` will always be different to
one of them, and these conditions always be true.
This code is meant to return if `insn` isn't one of these two values, so
the `||` should be replaced with `&&`.
gdb/ChangeLog:
* mips-linux-tdep.c (mips_linux_in_dynsym_stub): Fix condition.
H.J. Lu [Sat, 16 May 2020 13:07:12 +0000 (06:07 -0700)]
Sync config with GCC
Sync with GCC
2020-05-15 H.J. Lu <hongjiu.lu@intel.com>
PR bootstrap/95147
* cet.m4 (GCC_CET_FLAGS): Also check if -fcf-protection works
when defaulting to auto.
2020-05-14 H.J. Lu <hongjiu.lu@intel.com>
* cet.m4 (GCC_CET_FLAGS): Change default to auto.
Pedro Alves [Sat, 16 May 2020 11:26:56 +0000 (12:26 +0100)]
Fix IA64 GNU/Linux build
This commit should fix:
../../gdb/ia64-linux-nat.c: In function ‘void enable_watchpoints_in_psr(ptid_t)’:
../../gdb/ia64-linux-nat.c:535:56: error: no matching function for call to ‘get_thread_regcache(ptid_t&)’
struct regcache *regcache = get_thread_regcache (ptid);
^
In file included from ../../gdb/ia64-linux-nat.c:25:0:
../../gdb/regcache.h:35:25: note: candidate: regcache* get_thread_regcache(process_stratum_target*, ptid_t)
extern struct regcache *get_thread_regcache (process_stratum_target *target,
^
../../gdb/regcache.h:35:25: note: candidate expects 2 arguments, 1 provided
../../gdb/regcache.h:39:25: note: candidate: regcache* get_thread_regcache(thread_info*)
extern struct regcache *get_thread_regcache (thread_info *thread);
^
../../gdb/regcache.h:39:25: note: no known conversion for argument 1 from ‘ptid_t’ to ‘thread_info*’
gdb/ChangeLog:
2020-05-16 Pedro Alves <palves@redhat.com>
* ia64-linux-nat.c
(ia64_linux_nat_target) <enable_watchpoints_in_psr(ptid_t)>:
Declare method.
(enable_watchpoints_in_psr): Now a method of ia64_linux_nat_target.
Tankut Baris Aktemur [Sat, 16 May 2020 08:24:24 +0000 (10:24 +0200)] 
gdbserver/linux-ia64-low: fix a build-breaking typo
During the gdbserver c++'ification refactoring, I apparently made a
typo that broke build in ia64 targets.
gdbserver/ChangeLog:
2020-05-16 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* linux-ia64-low.cc (ia64_target::sw_breakpoint_from_kind):
Fix incorrect 'gdb_assert_no_reached' to 'gdb_assert_not_reached'.
(ia64_target::low_breakpoint_at): Ditto.
Simon Marchi [Sat, 16 May 2020 02:17:40 +0000 (22:17 -0400)]
gdb: remove unnecessary struct typedef in sparc64-tdep.c
When building with clang 11, I get:
CXX sparc64-tdep.o
/home/smarchi/src/binutils-gdb/gdb/sparc64-tdep.c:89:15: error: anonymous non-C-compatible type given name for linkage purposes by typedef declaration; add a tag name here [-Werror,-Wnon-c-typedef-for-linkage]
typedef struct
^
adi_stat_t
/home/smarchi/src/binutils-gdb/gdb/sparc64-tdep.c:103:16: note: type is not C-compatible due to this default member initializer
int tag_fd = 0;
^
/home/smarchi/src/binutils-gdb/gdb/sparc64-tdep.c:111:3: note: type is given name 'adi_stat_t' for linkage purposes by this typedef declaration
} adi_stat_t;
^
The typedef is not needed in C++ anyway, just remove them.
gdb/ChangeLog:
* sparc64-tdep.c (adi_stat_t): Remove typedef (leaving struct).
(sparc64_adi_info): Likewise.
GDB Administrator [Sat, 16 May 2020 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Fri, 15 May 2020 22:24:07 +0000 (16:24 -0600)]
Remove lookup_objfile_from_block
lookup_objfile_from_block mostly duplicates the functionality of
block_objfile, but in a less efficient way. This patch removes this
function and changes the callers to use block_objfile instead.
Tested by the buildbot.
gdb/ChangeLog
2020-05-15 Tom Tromey <tom@tromey.com>
* symtab.c (lookup_language_this, lookup_symbol_aux): Use
block_objfile.
(lookup_objfile_from_block): Remove.
(lookup_symbol_in_block, lookup_symbol_in_static_block)
(lookup_global_symbol): Use block_objfile.
* symtab.h (lookup_objfile_from_block): Don't declare.
* printcmd.c (clear_dangling_display_expressions): Use
block_objfile.
* parse.c (operator_check_standard): Use block_objfile.
Tom Tromey [Fri, 15 May 2020 22:11:33 +0000 (16:11 -0600)]
Remove allocate_symbol et al
This removes allocate_symbol, allocate_template_symbol, and
initialize_objfile_symbol in favor of changing the default values for
symbol members, and updating the one per-arch caller.
gdb/ChangeLog
2020-05-15 Tom Tromey <tom@tromey.com>
* language.c (language_alloc_type_symbol): Set
SYMBOL_SECTION.
* symtab.c (initialize_objfile_symbol): Remove.
(allocate_symbol): Remove.
(allocate_template_symbol): Remove.
* dwarf2/read.c (fixup_go_packaging): Use "new".
(new_symbol): Use "new".
(read_variable): Don't call initialize_objfile_symbol. Use
"new".
(read_func_scope): Use "new".
* xcoffread.c (process_xcoff_symbol): Don't call
initialize_objfile_symbol.
(SYMBOL_DUP): Remove.
* coffread.c (process_coff_symbol, coff_read_enum_type): Use
"new".
* symtab.h (allocate_symbol, initialize_objfile_symbol)
(allocate_template_symbol): Don't declare.
(struct symbol): Add copy constructor. Change defaults.
* jit.c (finalize_symtab): Use "new".
* ctfread.c (ctf_add_enum_member_cb, new_symbol, ctf_add_var_cb):
Use "new".
* stabsread.c (patch_block_stabs, define_symbol, read_enum_type)
(common_block_end): Use "new".
* mdebugread.c (parse_symbol): Use "new".
(new_symbol): Likewise.
Philippe Waroquiers [Sun, 10 May 2020 20:22:01 +0000 (22:22 +0200)] 
Update NEWS and documentation for help and apropos changes.
gdb/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention changes to help and apropos.
gdb/doc/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Help): Document the help and apropos changes.
(Aliases): Document new meaning of -a abbreviation flag.
Philippe Waroquiers [Sun, 10 May 2020 19:36:14 +0000 (21:36 +0200)]
Ensure class_alias is only used for user-defined aliases.
This commit finally does the (small) change that started this patch
series.
It ensures that the class_alias is only used for user-defined aliases.
So, the few GDB pre-defined aliases that were using the 'class_alias'
class are now using a real help class, typically the class of
the aliased command.
gdb/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* command.h (enum command_class): Improve comments, document
that class_alias is for user-defined aliases, give the class
name for each class, remove unused class_xdb.
* cli/cli-decode.c (add_com_alias): Document THECLASS intended usage.
* breakpoint.c (_initialize_breakpoint): Replace class_alias
by a precise class.
* infcmd.c (_initialize_infcmd): Likewise.
* reverse.c (_initialize_reverse): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
gdb/testsuite/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/alias.exp: Verify 'help aliases' shows user defined aliases.
Philippe Waroquiers [Sun, 10 May 2020 18:21:51 +0000 (20:21 +0200)]
Fix/improve 'apropos' output
Similarly to 'help CLASS', apropos possibly shows several
times the same help (for the command and for each of its aliases).
This patch changes 'apropos' so that the help for a command and
all its aliases is shown once.
So, apropos_cmd now skips all aliases/abbreviations, as these are printed
as part of the help of the aliased command.
When 'apropos' prints the help of a command, function 'help_cmd' now
unconditionally print the command name and its possible aliases (as we must
indicate to the user the command/aliases for which the help is printed).
When 'help somecommand' prints the help of a command, if the command is not
aliased, the command name is not printed (to avoid a useless first line), but if
it has aliases, then the command name and all its aliases are now printed.
In addition to provide to the user the choice of the best way to
type a command, it also avoids the strange behaviour that the output
of 'help somealias' does not mention somealias.
gdb/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.c (apropos_cmd): Produce output for aliases
when their aliased command is traversed.
(help_cmd): Add fput_command_names_styled call to
output command name and aliases when command has an alias.
gdb/testsuite/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/help.exp: Test apropos and help for commands
having aliases. Fixed comments not starting with an
upper-case letter or not finishing with a dot.
Philippe Waroquiers [Sun, 10 May 2020 16:31:03 +0000 (18:31 +0200)]
Fix/improve 'help CLASS' output
Currently, help CLASS possibly shows several times the same help,
as it shows it once for the command, and once for each alias.
The final objective of this patch series is to have class_alias used only
for user defined aliases, not anymore for aliases predefined by GDB.
The command 'help aliases' will then only show the user defined aliases.
So, the idea is that GDB predefined aliases will be shown together
with their aliased command.
This commit changes 'help CLASS' so that a command is shown once in the output,
with all its aliases.
This ensures:
* that the user has only to read once the same help text
* and sees the command and all its aliases in a glance, a.o. allowing
the user to choose the preferred way (e.g. the shortest one,
or the most mnemonic one) to type the command.
For example, the old output:
(gdb) help stack
...
List of commands:
backtrace -- Print backtrace of all stack frames, or innermost COUNT frames.
bt -- Print backtrace of all stack frames, or innermost COUNT frames.
...
(note that 'where' is not shown in this output)
becomes
(gdb) help stack
...
List of commands:
backtrace, where, bt -- Print backtrace of all stack frames, or innermost COUNT frames.
...
The output layout chosen is to have the command first, followed by all its
aliases separated by a comma. Note that the command and alias names are
title-styled. For sure, other layouts could be discussed, but this one is IMO
readable and compact.
The function 'help_cmd_list' can be simplified by removing the prefix argument,
as the prefixname of a command can now be retrieved in the GDB command tree
structure.
This also fixes the fact that 'help aliases' wrongly shows a long
list of (non-alias) when defining an alias for a prefix command.
For example, after:
(gdb) alias montre = show
then
(gdb) help aliases
shows hundreds of sub-commands starting with the non aliased command,
such as:
montre -- Generic command for showing things about the debugger.
show ada -- Generic command for showing Ada-specific settings.
show ada print-signatures -- Show whether the output of formal ...
....
'help_cmd_list' is also made static, as it is only used inside cli-decode.c.
Note that the 'help CLASS' is somewhat broken, in the sense that it
sometimes shows too many commands (commands not belonging to CLASS)
and sometimes shows not enough commands (not showing some commands
belonging to CLASS).
For example, 'help breakpoints' shows the command
'disable pretty-printer' and 'disable unwinder', not related to breakpoints.
On the other end, 'help stack' does not show 'disable unwinder'
while 'disable unwinder' is defined in unwinders.py as belonging to class_stack.
Fixing the missing commands is easy to do,
but fixing the excess commands is not straightforward, as many
subcommands have a class 'no_class' or 'all_class'.
Possibly, some of this might be improved/fixed in another patch series.
With this patch series, the 'abbrev flag' has as only remaining purpose
to avoid having the abbreviation alias appearing in the completion list,
so change 'help alias' accordingly.
gdb/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (help_cmd_list): Remove declaration.
* cli/cli-decode.c (help_cmd_list): Declare as static,
remove prefix argument, use bool for recurse arg, rework to show the aliases of
a command together with the command.
(fput_command_name_styled, fput_command_names_styled): New functions.
(print_help_for_command): Remove prefix arg, use bool for recurse arg, use
fput_command_name_styled.
(help_list, help_all): Update callers to remove prefix arg and use bool recurse.
* cli/cli-cmds.c (_initialize_cli_cmds): Update alias_command doc.
gdb/testsuite/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/alias.exp: Update help output check.
Philippe Waroquiers [Sun, 10 May 2020 06:36:29 +0000 (08:36 +0200)]
Fix inconsistent output of prefix and bugs in 'show' command
cmd_show_list function implements the 'show' command.
cmd_show_list output is inconsistent: it sometimes shows a prefix
and sometimes does not.
For example, in the below, you see that there is a prefix before
each value, except for 'enabled'.
(gdb) show style
style address background: The "address" style background color is: none
style address foreground: The "address" style foreground color is: blue
style address intensity: The "address" style display intensity is: normal
enabled: CLI output styling is enabled.
style filename background: The "filename" style background color is: none
...
There are other inconsistencies or bugs e.g. in
the below we see twice insn-number-max, once with a prefix
and once without prefix : last line, just before the value of
instruction-history-size which is itself without prefix.
(gdb) show record
record btrace bts buffer-size: The record/replay bts buffer size is 65536.
record btrace cpu: btrace cpu is 'auto'.
record btrace pt buffer-size: The record/replay pt buffer size is 16384.
record btrace replay-memory-access: Replay memory access is read-only.
record full insn-number-max: Record/replay buffer limit is 200000.
record full memory-query: Whether query if PREC cannot record memory change of next instruction is off.
record full stop-at-limit: Whether record/replay stops when record/replay buffer becomes full is on.
function-call-history-size: Number of functions to print in "record function-call-history" is 10.
insn-number-max: instruction-history-size: Number of instructions to print in "record instruction-history" is 10.
(gdb)
Also, some values are output several times due to some aliases, so avoid outputting duplicated
values by skipping all aliases.
Now that the command structure has a correct 'back-pointer' from a command
to its prefix command, we can simplify cmd_show_list by removing its prefix argument
and at the same time fix the output inconsistencies and bugs.
gdb/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-setshow.h (cmd_show_list): Remove prefix argument.
* cli/cli-decode.c (do_show_prefix_cmd): Likewise.
* command.h (cmd_show_list): Likewise.
* dwarf2/index-cache.c (show_index_cache_command): Likewise.
* cli/cli-setshow.c (cmd_show_list): Use the prefix to produce the output. Skip aliases.
gdb/testsuite/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/default.exp: Update output following fixes.
Philippe Waroquiers [Sat, 9 May 2020 14:17:45 +0000 (16:17 +0200)]
command-def-selftests.c: detect missing or wrong prefix cmd in subcommands.
This test revealed a number of problems that are fixed in the previous commit.
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* unittests/command-def-selftests.c (traverse_command_structure):
Verify all commands of a list have the same prefix command and
that only the top cmdlist commands have a null prefix.
Philippe Waroquiers [Sat, 9 May 2020 18:56:55 +0000 (20:56 +0200)]
Fix the problems reported by prefix check of command-def-selftests.c
The next commit updates command-def-selftests.c to detect missing
or wrong prefix commands in a list of subcommands.
This command structure selftest detects a series of problems
that are fixed by this commit.
Many commands have a null prefix command, e.g.
(gdb) maintenance selftest command_str
Running selftest command_structure_invariants.
list 0x560417949cb8 reachable via prefix 'append binary '. command 'memory' has null prefixcmd
list 0x560417949cb8 reachable via prefix 'append binary '. command 'value' has null prefixcmd
...
Most of these are fixed by the following changes:
* do_add_cmd searches the prefix command having the list
in which the command is added.
This ensures that a command defined after its prefix command
gets the correct prefix command.
* Due to the GDB initialization order, a GDB file can define
a subcommand before the prefix command is defined.
So, have add_prefix_cmd calling a new recursive function
'update_prefix_field_of_prefix_commands' to set the prefix
command of all sub-commands that are now reachable from
this newly defined prefix command. Note that this recursive
call replaces the function 'set_prefix_cmd' that was providing
a partial solution to this problem.
Following that, 2 python commands (defined after all the other GDB
commands) got a wrong prefix command, e.g. "info frame-filter" has
as prefix command the "i" alias of "info". This is fixed by having
lookup_cmd_for_prefixlist returning the aliased command rather than
the alias.
After that, one remaining problem:
(gdb) maintenance selftest command_str
Running selftest command_structure_invariants.
list 0x55f320272298 reachable via prefix 'set remote '. command 'system-call-allowed' has null prefixcmd
Self test failed: self-test failed at ../../classfix/gdb/unittests/command-def-selftests.c:196
Ran 1 unit tests, 1 failed
(gdb)
Caused by initialize_remote_fileio that was taking the address of
its arguments remote_set_cmdlist and remote_show_cmdlist instead
of receiving the correct values to use as list.
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.c (lookup_cmd_for_prefix): Return the aliased command
as prefix, not one of its aliases.
(set_cmd_prefix): Remove.
(do_add_cmd): Centralize the setting of the prefix of a command, when
command is defined after its full chain of prefix commands.
(add_alias_cmd): Remove call to set_cmd_prefix, as do_add_cmd does it.
(add_setshow_cmd_full): Likewise.
(update_prefix_field_of_prefixed_commands): New function.
(add_prefix_cmd): Replace non working call to set_cmd_prefix by
update_prefix_field_of_prefixed_commands.
* gdb/remote-fileio.c (initialize_remote_fileio): Use the real
addresses of remote_set_cmdlist and remote_show_cmdlist given
as argument, not the address of an argument.
* gdb/remote-fileio.h (initialize_remote_fileio): Likewise.
* gdb/remote.c (_initialize_remote): Likewise.
Philippe Waroquiers [Tue, 5 May 2020 19:38:38 +0000 (21:38 +0200)]
Fix problem that alias can be defined or not depending on the order.
When an alias name starts with the name of another alias,
GDB was accepting to define the aliases in one order (short first, long after),
but refused it the other way around.
So, fix the logic to recognise an already existing alias by using
lookup_cmd_composition.
Also, this revealed a bug in lookup_cmd_composition:
when the searched command is a prefix command, lookup_cmd_composition
was not returning the fact that a command was found even if the
TEXT to parse was fully consumed.
gdb/ChangeLog
YYYY-MM-DD Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (alias_command): Check for an existing alias
using lookup_cmd_composition, as valid_command_p is too strict
and forbids aliases that are the prefix of an existing alias
or command.
* cli/cli-decode.c (lookup_cmd_composition): Ensure a prefix
command is properly recognised as a valid command.
gdb/testsuite/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/alias.exp: Test aliases starting with a prefix of
another alias.
Philippe Waroquiers [Mon, 4 May 2020 20:25:24 +0000 (22:25 +0200)]
Add a selftest that detects a 'corrupted' command tree structure in GDB.
The GDB data structure that records the GDB commands is made of
'struct cmd_list_element' defined in cli-decode.h.
A cmd_list_element has various pointers to other cmd_list_element structures,
All these pointers are together building a graph of commands.
However, when following the 'next' and '*prefixlist' pointers of
cmd_list_element, the structure must better be a tree.
If such pointers do not form a tree, then some other elements of
cmd_list_element cannot get a correct semantic. In particular, the prefixname
has no correct meaning if the same prefix command can be reached via 2 different
paths.
This commit introduces a selftest that detects (at least some cases of) errors
leading to 'next' and '*prefixlist' not giving a tree structure.
The new 'command_structure_invariants' selftest detects one single case where
the command structure is not a tree:
(gdb) maintenance selftest command_structure_invariants
Running selftest command_structure_invariants.
list 0x56362e204b98 duplicated, reachable via prefix 'show ' and 'info set '. Duplicated list first command is 'ada'
Self test failed: self-test failed at ../../classfix/gdb/unittests/command-def-selftests.c:160
Ran 1 unit tests, 1 failed
(gdb)
This was fixed by the previous commit.
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* unittests/help-doc-selftests.c: Rename to
unittests/command-def-selftests.c
* unittests/command-def-selftests.c (help_doc_tests): Update some
comments.
(command_structure_tests, traverse_command_structure): New namespace
and function.
(command_structure_invariants_tests): New function.
(_initialize_command_def_selftests) Renamed from
_initialize_help_doc_selftests, register command_structure_invariants
selftest.
Philippe Waroquiers [Mon, 4 May 2020 21:02:18 +0000 (23:02 +0200)]
Fix the only incorrect case found by command_structure_invariants selftest.
The next commit introduces a selftest that detects when the GDB
command structure does not define a tree when using the pointers
'next/*prefixlist'. This test detects one such case, fixed
by this commit.
The command 'info set' was defined as a specific prefix command,
but re-using the command list already used for the 'show' command.
This leads to the command tree 'next/*prefixlist' to not be a tree.
This change defines 'info set ' as an alias, thereby fixing the selftest.
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (_initialize_cli_cmds): Define 'info set' as
an alias of 'show'.
Joel Brobecker [Fri, 15 May 2020 20:06:42 +0000 (15:06 -0500)] 
update name of several Ada fixed-point type handling functions
The purpose of this patch is to prepare for the future where
fixed point types become described using standard DWARF info,
rather than GNAT encodings. For that, we rename a number of
routines manipulating Ada fixed point types to make it explicit
from their new names that they rely on the GNAT encodings to work.
This will allow us, when we introduce support for fixed point types
from standard DWARF to use names that are not ambiguous with
the functions that do similar work, but only for GNAT encodings.
gdb/ChangeLog:
* ada-lang.h: (ada_is_gnat_encoded_fixed_point_type): Renames
ada_is_fixed_point_type. Update all callers.
(gnat_encoded_fixed_point_delta): Renames ada_delta. Update
all callers.
* ada-lang.c (gnat_encoded_fixed_type_info): Renames fixed_type_info.
Update all callers.
* ada-typeprint.c (print_gnat_encoded_fixed_point_type): Renames
print_fixed_point_type. Update all callers.
* ada-valprint.c (ada_value_print_num): Replace call to
ada_is_fixed_point_type by ada_is_gnat_encoded_fixed_point_type.
Gary Benson [Fri, 15 May 2020 14:03:42 +0000 (15:03 +0100)] 
Fix "control reaches end of non-void function" errors in testsuite
When running the testsuite with clang, a number of testcases fail to
build with the following errors:
warning: control reaches end of non-void function [-Wreturn-type]
warning: control may reach end of non-void function [-Wreturn-type]
This prevents a number of testcases from executing. This commit fixes.
gdb/testsuite/ChangeLog:
* gdb.base/info-os.c (main): Add return statement.
* gdb.base/info_minsym.c (minsym_fun): Likewise.
* gdb.base/large-frame-2.c (func): Likewise.
* gdb.base/pr10179-a.c (foo1, bar1): Likewise.
* gdb.base/pr10179-b.c (foo2): Likewise.
* gdb.base/valgrind-disp-step.c (foo): Likewise.
* gdb.base/watch-cond.c (func): Likewise.
* gdb.multi/goodbye.c (verylongfun): Likewise.
* gdb.multi/hello.c (commonfun): Likewise.
* gdb.python/py-finish-breakpoint.c (call_longjmp): Likewise.
* gdb.threads/fork-plus-threads.c (thread_func): Likewise.
* gdb.threads/forking-threads-plus-breakpoint.c (thread_forks):
Likewise.
* gdb.threads/hand-call-new-thread.c (foo): Likewise.
* gdb.threads/interrupt-while-step-over.c (child_function):
Likewise.
* gdb.trace/actions-changed.c (end): Likewise.
Gary Benson [Fri, 15 May 2020 13:25:32 +0000 (14:25 +0100)]
Don't silently skip tests if OpenCL is unsupported
A number of tests silently exit if OpenCL support is not detected.
This commit fixes.
gdb/testsuite/ChangeLog:
* gdb.opencl/callfuncs.exp: Report when test skipped.
* gdb.opencl/convs_casts.exp: Likewise.
* gdb.opencl/datatypes.exp: Likewise.
* gdb.opencl/operators.exp: Likewise.
* gdb.opencl/vec_comps.exp: Likewise.
Tom de Vries [Fri, 15 May 2020 12:49:48 +0000 (14:49 +0200)]
[gdb/testsuite] Rename *.exp.in to *.exp.tcl
Say we have some common tcl code that we want to include in test-cases
t1.exp and t1.exp.
We could put the common code into a file common.exp alongside the test-cases,
but that will make dejagnu treat that file as another test-case. To prevent
this, we use a suffix, currently .in, in other words we put the common code in
a file common.exp.in.
The .in suffix however is also used in autoconf, which might cause confusion.
Change the suffix from .in to .tcl.
gdb/testsuite/ChangeLog:
2020-05-15 Tom de Vries <tdevries@suse.de>
* gdb.base/align.exp.in: Rename to ...
* gdb.base/align.exp.tcl: ... this.
* gdb.base/align-c++.exp: Update.
* gdb.base/align-c.exp: Update.
* gdb.base/all-architectures.exp.in: Rename to ...
* gdb.base/all-architectures.exp: ... this.
* gdb.base/all-architectures-0.exp: Update.
* gdb.base/all-architectures-1.exp: Update.
* gdb.base/all-architectures-2.exp: Update.
* gdb.base/all-architectures-3.exp: Update.
* gdb.base/all-architectures-4.exp: Update.
* gdb.base/all-architectures-5.exp: Update.
* gdb.base/all-architectures-6.exp: Update.
* gdb.base/all-architectures-7.exp: Update.
* gdb.base/infcall-nested-structs.exp.in: Rename to ...
* gdb.base/infcall-nested-structs.exp.tcl: ... this.
* gdb.base/infcall-nested-structs-c++.exp: Update.
* gdb.base/infcall-nested-structs-c.exp: Update.
* gdb.base/info-types.exp.in: Rename to ...
* gdb.base/info-types.exp.tcl: ... this.
* gdb.base/info-types-c++.exp: Update.
* gdb.base/info-types-c.exp: Update.
* gdb.base/max-depth.exp.in: Rename to ...
* gdb.base/max-depth.exp.tcl: ... this.
* gdb.base/max-depth-c++.exp: Update.
* gdb.base/max-depth-c.exp: Update.
* gdb.cp/cpexprs.exp.in: Rename to ...
* gdb.cp/cpexprs.exp.tcl: ... this.
* gdb.cp/cpexprs-debug-types.exp: Update.
* gdb.cp/cpexprs.exp: Update.
* gdb.cp/infcall-nodebug.exp.in: Rename to ...
* gdb.cp/infcall-nodebug.exp.tcl: ... this.
* gdb.cp/infcall-nodebug-c++-d0.exp: Update.
* gdb.cp/infcall-nodebug-c++-d1.exp: Update.
* gdb.cp/infcall-nodebug-c-d0.exp: Update.
* gdb.cp/infcall-nodebug-c-d1.exp: Update.
* gdb.dwarf2/clang-debug-names.exp.in: Rename to ...
* gdb.dwarf2/clang-debug-names.exp.tcl: ... this.
* gdb.dwarf2/clang-debug-names-2.exp: Update.
* gdb.dwarf2/clang-debug-names.exp: Update.
Andrew Burgess [Fri, 15 May 2020 10:46:52 +0000 (11:46 +0100)] 
gdb/testsuite: Revert commit
843f4d93576eef02139f7b1b3fa1cea7b0f286f1
Revert this commit:
commit
843f4d93576eef02139f7b1b3fa1cea7b0f286f1
Date: Tue May 12 17:38:17 2020 +0100
gdb/testsuite: Disable path and duplicate checks when parallel testing
Now that this commit has landed:
commit
c959562d9ba0b2eaf240c601b2c2fd49c42c1f2f
Date: Fri May 15 11:23:59 2020 +0100
contrib: Update dg-extract-results.* from gcc
We can now make use of the mechanism for detecting paths in test names
and duplicate test names, even when we run tests in parallel.
gdb/testsuite/ChangeLog:
* lib/check-test-names.exp: Remove code that prevents this file
loading when tests are run in parallel.
Andrew Burgess [Fri, 15 May 2020 10:23:59 +0000 (11:23 +0100)]
contrib: Update dg-extract-results.* from gcc
Pull the latest version of the dg-extract-results.* scripts from the
gcc repository. This picks up this commit from gcc:
commit
c9a41202b272b0b3a3c64a96ef4a5a97579eb017
Date: Mon May 11 22:32:35 2020 +0100
contrib: Handle GDB specific test result types
This commit is for the benefit of GDB, but as the binutils-gdb
repository shares the contrib/ directory with gcc, this commit must
first be applied to gcc then copied back to binutils-gdb.
This commit extends the two scripts contrib/dg-extract-results.{py,sh}
to handle some new, GDB specific test result types. These test
results types should never appear in GCC, or any other tool that
shares the contrib/ directly, so this change should be harmless.
In this patch series:
https://sourceware.org/pipermail/gdb-patches/2020-April/167847.html
changes were made in GDB's use of Dejagnu so that two additional
conditions could be detected, these are:
1. Test names that contain either the build or source paths. Such
test names make it difficult to compare the results of two test runs
of GDB from two different directories, and
2. Duplicate test names. Duplicates make it difficult to track down
exactly which test has failed.
When running Dejagnu on GDB we can now (sometimes) see two additional
test result types matching the above conditions, these are '# of paths
in test names' and '# of duplicate test names'.
If the test is run in parallel mode (make -j...) then these extra test
results will appear in the individual test summary files, but are not
merged into the final summary file.
Additionally, within the summary file there are now two new types of
test summary line, these are 'PATH: ...' and 'DUPLICATE: ...', these
allow users to quickly search the test summary to track down where the
offending test names are. These lines are similarly not merged into
the unified gdb.sum file after a parallel test run.
This commit extends the dg-extract-results.* scripts to calculate the
totals for the two new result types, and to copy the new test summary
lines into the unified summary file.
contrib/ChangeLog:
* dg-extract-results.py: Update from gcc repo.
* dg-extract-results.sh: Likewise.
Pedro Alves [Fri, 15 May 2020 10:22:47 +0000 (11:22 +0100)]
Fix gdb.multi/multi-kill.exp
The previous patch misssed declaring the 'testpid' array as namespace
variable. While it at, might as well go back to having start_inferior
refer to the "global" testpid, using "variable" too.
gdb/testsuite/ChangeLog:
2020-05-15 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-kill.exp (start_inferior): Remove
'testpid' parameter. Refer to namespace variable directly.
(testpid): Declare as namespace variable.
Pedro Alves [Fri, 15 May 2020 10:09:51 +0000 (11:09 +0100)]
Fix global variable collision in gdb.multi/multi-kill.exp
The new gdb.multi/multi-kill.exp testcase added an 'testpid' array,
which may conflict with other global 'testpid' variables used by other
testcases, resulting in:
...
ERROR: tcl error sourcing
/data/gdb_versions/devel/src/gdb/testsuite/gdb.multi/multi-kill.exp.
ERROR: can't set "testpid(1)": variable isn't array
while executing
"set testpid($num) [get_integer_valueof "pid" -1]"
or
$ runtest gdb.threads/check-libthread-db.exp gdb.multi/multi-kill.exp
...
Running /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.multi/multi-kill.exp ...
Running /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.threads/check-libthread-db.exp ...
ERROR: tcl error sourcing /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.threads/check-libthread-db.exp.
ERROR: can't set "testpid": variable is array
while executing
"set testpid [spawn_id_get_pid $test_spawn_id]"
("uplevel" body line 8)
Fix this with a namespace, like gdb.linespec/explicit.exp does.
gdb/testsuite/ChangeLog:
2020-05-15 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-kill.exp: Wrap in namespace.
(start_inferior): Add TESTPID parameter. Use it instead of the
testpid global.
(top level): Define empty TESTPID array, and pass it down to
start_inferior.
Hannes Domani [Mon, 11 May 2020 17:18:31 +0000 (19:18 +0200)] 
Enable hardware breakpoints for gdbserver on Windows
When trying to use hardware breakpoints with gdbserver you get this error:
(gdb) hbreak main
Hardware assisted breakpoint 2 at 0x40162d: file gdb-9493.c, line 5.
(gdb) c
Continuing.
Warning:
Cannot insert hardware breakpoint 2.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
It turns out the respective types just needed to be added to the
appropriate callback functions, because x86_dr_(insert|remove)_watchpoint
already handles them.
gdbserver/ChangeLog:
2020-05-15 Hannes Domani <ssbssa@yahoo.de>
* win32-i386-low.cc (i386_supports_z_point_type): Handle
Z_PACKET_HW_BP z_type.
(i386_insert_point): Handle raw_bkpt_type type.
(i386_remove_point): Likewise.
Alan Modra [Fri, 15 May 2020 08:36:05 +0000 (18:06 +0930)]
Fix tight loop on recursively-defined symbols
This patch fixes a bug in GAS where the assembler enters a tight loop
when attempting to resolve recursively-defined symbols, e.g. when
trying to assemble "a=a".
This is a regression introduced between binutils 2.32 and 2.33,
by commit
1903f1385bff9
* symbols.c (struct local_symbol): Update comment.
(resolve_symbol_value): For resolved symbols equated to other
symbols, verify that the referenced symbol is not a local_symbol
before accessing sy_value. Don't leave symbol loops during
finalize_syms resolution.
* testsuite/gas/all/assign-bad-recursive.d: New test.
* testsuite/gas/all/assign-bad-recursive.l: Error output for test.
* testsuite/gas/all/assign-bad-recursive.s: Assembly for test.
* testsuite/gas/all/gas.exp: Run it.
Kevin Buettner [Thu, 14 May 2020 18:10:14 +0000 (11:10 -0700)] 
Disable record btrace bts support for AMD processors
Some Intel processors implement a Branch Trace Store (BTS) which GDB
uses for reverse execution support via the "record btrace bts"
command.
I have been unable to find a description of a similar feature in a
recent (April 2020) AMD64 architecture reference:
https://www.amd.com/system/files/TechDocs/40332.pdf
While it is the case that AMD processors have an LBR (last branch
record) bit in the DebugCtl MSR, it seems that it affects only four
MSRs when enabled. The names of these MSRs are LastBranchToIP,
LastBranchFromIP, LastIntToIP, and LastIntFromIP. I can find no
mention of anything more extensive. While looking at an Intel
architecture document, I noticed that Intel's P6 family from the
mid-90s had registers of the same name.
Therefore...
This commit disables "record btrace bts" support in GDB for AMD
processors.
Using the test case from gdb.base/break.exp, the sessions
below show the expected behavior (run on a machine with an
Intel processor) versus that on a machine with an AMD processor.
The AMD processor in question is reported as follows by "lscpu":
AMD Ryzen Threadripper 2950X 16-Core Processor . Finally, I'll
note that the AMD machine is actually a VM, but I see similar
behavior on both the virtualization host and the VM.
Intel machine - Desired behavior:
[kevinb@mohave gdb]$ ./gdb -q testsuite/outputs/gdb.base/break/break
Reading symbols from testsuite/outputs/gdb.base/break/break...
(gdb) start
Temporary breakpoint 1 at 0x401179: file /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c, line 43.
Starting program: /home/kevinb/sourceware-git/native-build/bld/gdb/testsuite/outputs/gdb.base/break/break
Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd748, envp=0x7fffffffd758)
at /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c:43
43 if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */
(gdb) record btrace
(gdb) b factorial
Breakpoint 2 at 0x40121b: file /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c, line 63.
(gdb) c
Continuing.
Breakpoint 2, factorial (value=6)
at /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c:63
63 if (value > 1) { /* set breakpoint 7 here */
(gdb) info record
Active record target: record-btrace
Recording format: Branch Trace Store.
Buffer size: 64kB.
Recorded 768 instructions in 22 functions (0 gaps) for thread 1 (process 19215).
(gdb) record function-call-history
13 do_lookup_x
14 _dl_lookup_symbol_x
15 _dl_fixup
16 _dl_runtime_resolve_xsavec
17 atoi
18 strtoq
19 ____strtoll_l_internal
20 atoi
21 main
22 factorial
(gdb) record instruction-history
759 0x00007ffff7ce0917 <____strtoll_l_internal+647>: pop %r15
760 0x00007ffff7ce0919 <____strtoll_l_internal+649>: retq
761 0x00007ffff7cdd064 <atoi+20>: add $0x8,%rsp
762 0x00007ffff7cdd068 <atoi+24>: retq
763 0x00000000004011b1 <main+75>: mov %eax,%edi
764 0x00000000004011b3 <main+77>: callq 0x401210 <factorial>
765 0x0000000000401210 <factorial+0>: push %rbp
766 0x0000000000401211 <factorial+1>: mov %rsp,%rbp
767 0x0000000000401214 <factorial+4>: sub $0x10,%rsp
768 0x0000000000401218 <factorial+8>: mov %edi,-0x4(%rbp)
AMD machine - Wrong behavior:
[kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/break/break
Reading symbols from testsuite/outputs/gdb.base/break/break...
(gdb) start
Temporary breakpoint 1 at 0x401179: file /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c, line 43.
Starting program: /mesquite2/sourceware-git/f32-master/bld/gdb/testsuite/outputs/gdb.base/break/break
Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd5b8, envp=0x7fffffffd5c8)
at /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c:43
43 if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */
(gdb) record btrace
(gdb) b factorial
Breakpoint 2 at 0x40121b: file /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c, line 63.
(gdb) c
Continuing.
Breakpoint 2, factorial (value=6)
at /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c:63
63 if (value > 1) { /* set breakpoint 7 here */
(gdb) info record
Active record target: record-btrace
Recording format: Branch Trace Store.
Buffer size: 64kB.
warning: Recorded trace may be incomplete at instruction 7737 (pc = 0x405000).
warning: Recorded trace may be incomplete at instruction 7739 (pc = 0x0).
Recorded 7740 instructions in 46 functions (2 gaps) for thread 1 (process
1402911).
(gdb) record function-call-history
37 ??
38 values
39 some_enum_global
40 ??
41 some_union_global
42 some_variable
43 ??
44 [decode error (2): unknown instruction]
45 ??
46 [decode error (2): unknown instruction]
(gdb) record instruction-history
7730 0x0000000000404ff3: add %al,(%rax)
7731 0x0000000000404ff5: add %al,(%rax)
7732 0x0000000000404ff7: add %al,(%rax)
7733 0x0000000000404ff9: add %al,(%rax)
7734 0x0000000000404ffb: add %al,(%rax)
7735 0x0000000000404ffd: add %al,(%rax)
7736 0x0000000000404fff: .byte 0x0
7737 0x0000000000405000: Cannot access memory at address 0x405000
Lastly, I'll note that I see a lot of gdb.btrace failures without
this commit. Worse still, the results aren't always the same which
causes a lot of noise when comparing test results.
gdbsupport/ChangeLog:
* btrace-common.h (btrace_cpu_vendor): Add CV_AMD.
gdb/ChangeLog:
* nat/linux-btrace.c (btrace_this_cpu): Add check for AMD
processors.
(cpu_supports_bts): Add CV_AMD case.
Laurent Morichetti [Thu, 14 May 2020 23:59:16 +0000 (19:59 -0400)] 
gdb: infrun: consume multiple events at each pass in stop_all_threads
[Simon: I send this patch on behalf of Laurent Morichetti, I added the
commit message and performance measurement stuff.
Also, this patch is better viewed with "git show -w".]
stop_all_threads, in infrun.c, is used to stop all running threads on
targets that are always non-stop. It's used, for example, when the
program hits a breakpoint while GDB is set to "non-stop off". It sends
a stop request for each running thread, then collects one wait event for
each.
Since new threads can spawn while we are stopping the threads, it's
written in a way where it makes multiple such "send stop requests to
running threads & collect wait events" passes. The function completes
when it has made two passes where it hasn't seen any running threads.
With the way it's written right now is, it iterates on the thread list,
sending a stop request for each running thread. It then waits for a
single event, after which it iterates through the thread list again. It
sends stop requests for any running threads that's been created since
the last iteration. It then consumes another single wait event.
This makes it so we iterate on O(n^2) threads in total, where n is the
number of threads. This patch changes the function to reduce it to
O(n). This starts to have an impact when dealing with multiple
thousands of threads (see numbers below). At each pass, we know the
number of outstanding stop requests we have sent, for which we need to
collect a stop event. We can therefore loop to collect this many stop
events before proceeding to the next pass and iterate on the thread list
again.
To check the performance improvements with this patch, I made an
x86/Linux program with a large number of idle threads (varying from 1000
to 10000). The program's main thread hits a breakpoint once all these
threads have started, which causes stop_all_threads to be called to stop
all these threads. I measured (by patching stop_all_threads):
- the execution time of stop_all_threads
- the total number of threads we iterate on during the complete
execution of the function (the total number of times we execute the
"for (thread_info *t : all_non_exited_threads ())" loop)
These are the execution times, in milliseconds:
# threads before after
1000 226 106
2000 997 919
3000 3461 2323
4000 4330 3570
5000 8642 6600
6000 9918 8039
7000 12662 10930
8000 16652 11222
9000 21561 15875
10000 26613 20019
Note that I very unscientifically executed each case only once.
These are the number of loop executions:
# threads before after
1000
1003002 3003
2000
4006002 6003
3000
9009002 9003
4000
16012002 12003
5000
25015002 15003
6000
36018002 18003
7000
49021002 21003
8000
64024002 24003
9000
81027002 27003
10000
100030002 30003
This last table shows pretty well the O(n^2) vs O(n) behaviors.
Reg-tested on x86 GNU/Linux (Ubuntu 16.04).
gdb/ChangeLog:
YYYY-MM-DD Laurent Morichetti <Laurent.Morichetti@amd.com>
YYYY-MM-DD Simon Marchi <simon.marchi@efficios.com>
* infrun.c (stop_all_threads): Collect multiple wait events at
each pass.
Nikita Ermakov [Thu, 14 May 2020 22:57:57 +0000 (08:27 +0930)] 
gold: powerpc: Test whether sym is not a plugin in do_gc_mark_symbol
sym->object() could be either a Plugin or Powerpc_relobj. There could
be a situation when Pluginobj would be proccessed in
ppc_object->get_opd_ent(dst_off) as Powerpc_relobj and it leads to the
segmentation fault.
* powerpc.cc (do_gc_mark_symbol): Don't segfault on plugin symbols.
Simon Marchi [Thu, 14 May 2020 17:46:38 +0000 (13:46 -0400)]
gdb: remove TYPE_CODE macro
Remove TYPE_CODE, changing all the call sites to use type::code
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use
type::code instead.
Simon Marchi [Thu, 14 May 2020 17:45:40 +0000 (13:45 -0400)]
gdb: add type::code / type::set_code
Add the code and set_code methods on code, in order to remove the
TYPE_CODE macro. In this patch, the TYPE_CODE macro is changed to use
type::code, so all the call sites that are used to set the type code are
changed to use type::set_code. The next patch will remove TYPE_CODE
completely.
gdb/ChangeLog:
* gdbtypes.h (struct type) <code, set_code>: New methods.
(TYPE_CODE): Use type::code. Change all call sites used to set
the code to use type::set_code instead.
Tom de Vries [Thu, 14 May 2020 15:24:49 +0000 (17:24 +0200)]
[gdb/testsuite] Fix gdb.fortran/nested-funcs-2.exp with gdbserver
When running test-case gdb.fortran/nested-funcs-2.exp with target board
native-gdbserver, we have:
...
(gdb) call contains_keyword::subroutine_to_call()^M
(gdb) FAIL: gdb.fortran/nested-funcs-2.exp: src_prefix=0: nest_prefix=1: \
call contains_keyword::subroutine_to_call()
...
This is caused by the fact that we're trying to match inferior output using
gdb_test.
Fix this by using gdb_test_stdio instead.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-14 Tom de Vries <tdevries@suse.de>
* gdb.fortran/nested-funcs-2.exp: Use gdb_test_stdio to test inferior
output.
Tom de Vries [Thu, 14 May 2020 15:24:49 +0000 (17:24 +0200)]
[gdb/testsuite] Split up multi-exec test-cases
With test-case gdb.base/align.exp and target board native-gdbserver, we run
into:
...
(gdb) file outputs/gdb.base/align/c/align^M
Reading symbols from outputs/gdb.base/align/c/align...^M
(gdb) delete breakpoints^M
(gdb) info breakpoints^M
No breakpoints or watchpoints.^M
(gdb) break main^M
Breakpoint 1 at 0x4004ab: file outputs/gdb.base/align/c/align.c, line 838.^M
(gdb) kill^M
The program is not being run.^M
(gdb) spawn gdbserver --once localhost:2592 outputs/gdb.base/align/align^M
Process outputs/gdb.base/align/align created; pid = 6946^M
Listening on port 2592^M
target remote localhost:2592^M
Remote debugging using localhost:2592^M
warning: Mismatch between current exec-file outputs/gdb.base/align/c/align^M
and automatically determined exec-file outputs/gdb.base/align/align^M
exec-file-mismatch handling is currently "ask"^M
Load new symbol table from "outputs/gdb.base/align/align"? (y or n) Quit^M
(gdb) ERROR: test suppressed
...
Fix this by turning this and similar test-cases into regular, single
executable test-cases.
This fixes 100+ FAILs with target board native-gdbserver.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-14 Tom de Vries <tdevries@suse.de>
* gdb.base/align.exp: Split into ...
* gdb.base/align.exp.in: ...
* gdb.base/align-c++.exp: ...
* gdb.base/align-c.exp: ... these.
* gdb.base/infcall-nested-structs.exp: Split into ...
* gdb.base/infcall-nested-structs.exp.in: ...
* gdb.base/infcall-nested-structs-c++.exp: ...
* gdb.base/infcall-nested-structs-c.exp: ... these.
* gdb.base/info-types.exp: Split into ...
* gdb.base/info-types.exp.in: ...
* gdb.base/info-types-c++.exp: ...
* gdb.base/info-types-c.exp: ... these.
* gdb.base/max-depth.exp: Split into ...
* gdb.base/max-depth.exp.in: ...
* gdb.base/max-depth-c++.exp: ...
* gdb.base/max-depth-c.exp: ... these.
* gdb.cp/infcall-nodebug.exp: Split into ...
* gdb.cp/infcall-nodebug.exp.in: ...
* gdb.cp/infcall-nodebug-c++-d0.exp: ...
* gdb.cp/infcall-nodebug-c++-d1.exp: ...
* gdb.cp/infcall-nodebug-c-d0.exp: ...
* gdb.cp/infcall-nodebug-c-d1.exp: ... these.
Tankut Baris Aktemur [Thu, 14 May 2020 11:59:54 +0000 (13:59 +0200)]
gdb/infrun: handle already-exited threads when attempting to stop
In stop_all_threads, GDB sends signals to other threads in an attempt
to stop them. While in a typical scenario the expected wait status is
TARGET_WAITKIND_STOPPED, it is possible that the thread GDB attempted
to stop has already terminated. If so, a waitstatus other than
TARGET_WAITKIND_STOPPED would be received. Handle this case
appropriately.
If a wait status that denotes thread termination is ignored, GDB goes
into an infinite loop in stop_all_threads.
E.g.:
$ gdb ./a.out
(gdb) start
...
(gdb) add-inferior -exec ./a.out
...
(gdb) inferior 2
...
(gdb) start
...
(gdb) set schedule-multiple on
(gdb) set debug infrun 2
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (process 10449)
infrun: clear_proceed_status_thread (process 10453)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 10449
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 10449] at 0x55555555514e
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: proceed: resuming process 10453
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 10453] at 0x55555555514e
infrun: prepare_to_wait
infrun: Found 2 inferiors, starting at #0
infrun: target_wait (-1.0.0, status) =
infrun: 10449.10449.0 [process 10449],
infrun: status->kind = exited, status = 0
infrun: handle_inferior_event status->kind = exited, status = 0
[Inferior 1 (process 10449) exited normally]
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 10453 executing, need stop
infrun: target_wait (-1.0.0, status) =
infrun: 10453.10453.0 [process 10453],
infrun: status->kind = exited, status = 0
infrun: stop_all_threads status->kind = exited, status = 0 process 10453
infrun: process 10453 executing, already stopping
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = no-resumed
infrun: infrun_async(0)
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
...
And this polling goes on forever. This patch prevents the infinite
looping behavior. For the same scenario above, we obtain the
following behavior:
...
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (process 31229)
infrun: clear_proceed_status_thread (process 31233)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 31229
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 31229] at 0x55555555514e
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: proceed: resuming process 31233
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 31233] at 0x55555555514e
infrun: prepare_to_wait
infrun: Found 2 inferiors, starting at #0
infrun: target_wait (-1.0.0, status) =
infrun: 31229.31229.0 [process 31229],
infrun: status->kind = exited, status = 0
infrun: handle_inferior_event status->kind = exited, status = 0
[Inferior 1 (process 31229) exited normally]
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 31233 executing, need stop
infrun: target_wait (-1.0.0, status) =
infrun: 31233.31233.0 [process 31233],
infrun: status->kind = exited, status = 0
infrun: stop_all_threads status->kind = exited, status = 0 process 31233
infrun: saving status status->kind = exited, status = 0 for 31233.31233.0
infrun: process 31233 not executing
infrun: stop_all_threads, pass=1, iterations=1
infrun: process 31233 not executing
infrun: stop_all_threads done
(gdb)
The exit event from Inferior 1 is received and shown to the user.
The exit event from Inferior 2 is not displayed, but kept pending.
(gdb) info inferiors
Num Description Connection Executable
* 1 <null> a.out
2 process 31233 1 (native) a.out
(gdb) inferior 2
[Switching to inferior 2 [process 31233] (a.out)]
[Switching to thread 2.1 (process 31233)]
Couldn't get registers: No such process.
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (process 31233)
infrun: clear_proceed_status_thread: thread process 31233 has pending wait status status->kind = exited, status = 0 (currently_stepping=0).
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 31233
infrun: resume: thread process 31233 has pending wait status status->kind = exited, status = 0 (currently_stepping=0).
infrun: prepare_to_wait
infrun: Using pending wait status status->kind = exited, status = 0 for process 31233.
infrun: target_wait (-1.0.0, status) =
infrun: 31233.31233.0 [process 31233],
infrun: status->kind = exited, status = 0
infrun: handle_inferior_event status->kind = exited, status = 0
[Inferior 2 (process 31233) exited normally]
infrun: stop_waiting
(gdb) info inferiors
Num Description Connection Executable
1 <null> a.out
* 2 <null> a.out
(gdb)
When a process exits and we leave the process exit event pending, we
need to make sure that at least one thread is left listed in the
inferior's thread list. This is necessary in order to make sure we
have a thread that we can later resume, so the process exit event can
be collected/reported.
When native debugging, the GNU/Linux back end already makes sure that
the last LWP isn't deleted.
When remote debugging against GNU/Linux GDBserver, the GNU/Linux
GDBserver backend also makes sure that the last thread isn't deleted
until the process exit event is reported to GDBserver core.
However, between the backend reporting the process exit event to
GDBserver core, and GDB consuming the event, GDB may update the thread
list and find no thread left in the process. The process exit event
will be pending somewhere in GDBserver's stop reply queue, or
gdb/remote.c's queue, or whathever other event queue inbetween
GDBserver and infrun.c's handle_inferior_event.
This patch tweaks remote.c's target_update_thread_list implementation
to avoid deleting the last thread of an inferior.
In the past, this case of inferior-with-no-threads led to a special
case at the bottom of handle_no_resumed, where it reads:
/* Note however that we may find no resumed thread because the whole
process exited meanwhile (thus updating the thread list results
in an empty thread list). In this case we know we'll be getting
a process exit event shortly. */
for (inferior *inf : all_non_exited_inferiors (ecs->target))
In current master, that code path is still reachable with the
gdb.threads/continue-pending-after-query.exp testcase, when tested
against GDBserver, with "maint set target-non-stop" forced "on".
With this patch, the scenario that loop was concerned about is still
properly handled, because the loop above it finds the process's last
thread with "executing" set to true, and thus the handle_no_resumed
function still returns true.
Since GNU/Linux native and remote are the only targets that support
non-stop mode, and with this patch, we always make sure the inferior
has at least one thread, this patch also removes that "inferior with
no threads" special case handling from handle_no_resumed.
Since remote.c now has a special case where we treat a thread that has
already exited as if it was still alive, we might need to tweak
remote.c's target_thread_alive implementation to return true for that
thread without querying the remote side (which would say "no, not
alive"). After inspecting all the target_thread_alive calls in the
codebase, it seems that only the one from prune_threads could result
in that thread being accidentally deleted. There's only one call to
prune_threads in GDB's common code, so this patch handles this by
replacing the prune_threads call with a delete_exited_threads call.
This seems like an improvement anyway, because we'll still be doing
what the comment suggests we want to do, and, we avoid remote protocol
traffic.
Regression-tested on X86_64 Linux.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Tom de Vries <tdevries@suse.de>
Pedro Alves <palves@redhat.com>
PR threads/25478
* infrun.c (stop_all_threads): Do NOT ignore
TARGET_WAITKIND_NO_RESUMED, TARGET_WAITKIND_THREAD_EXITED,
TARGET_WAITKIND_EXITED, TARGET_WAITKIND_SIGNALLED wait statuses
received.
(handle_no_resumed): Remove code handling a live inferior with no
threads.
* remote.c (has_single_non_exited_thread): New.
(remote_target::update_thread_list): Do not delete a thread if is
the last thread of the process.
* thread.c (thread_select): Call delete_exited_threads instead of
prune_threads.
gdb/testsuite/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Pedro Alves <palves@redhat.com>
* gdb.multi/multi-exit.c: New file.
* gdb.multi/multi-exit.exp: New file.
* gdb.multi/multi-kill.c: New file.
* gdb.multi/multi-kill.exp: New file.
Tankut Baris Aktemur [Thu, 14 May 2020 11:59:54 +0000 (13:59 +0200)]
gdb/infrun: enable/disable thread events of all targets in stop_all_threads
In stop_all_threads, the thread events of the current top target are
enabled at the beginning of the function and then disabled at the end
(at scope exit time). Because there may be multiple targets whose
thread lists will be updated and whose threads are stopped,
enable/disable thread events for all targets.
This update caused a change in the annotations. In particular, a
"frames-invalid" annotation is printed one more time due to switching
the current inferior. Hence, gdb.base/annota1.exp and
gdb.cp/annota2.exp tests are also updated.
Regression-tested on X86_64 Linux using the default board file and the
native-extended-gdbserver board file.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* infrun.c (stop_all_threads): Enable/disable thread events of all
targets. Move a debug message denoting the end of the function
into the SCOPED_EXIT block.
gdb/testsuite/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/annota1.exp: Update the expected output.
* gdb.cp/annota2.exp: Ditto.
Tankut Baris Aktemur [Thu, 14 May 2020 11:59:54 +0000 (13:59 +0200)]
gdb: introduce 'all_non_exited_process_targets' and 'switch_to_target_no_thread'
Introduce two new convenience functions:
1. all_non_exited_process_targets: returns a collection of all process
stratum targets that have non-exited inferiors on them. Useful for
iterating targets.
2. switch_to_target_no_thread: switch the context to the first
inferior of the given target, and to no selected thread.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* process-stratum-target.h: Include <set>.
(all_non_exited_process_targets, switch_to_target_no_thread): New
function declarations.
* process-stratum-target.c (all_non_exited_process_targets)
(switch_to_target_no_thread): New function implementations.
Tankut Baris Aktemur [Thu, 14 May 2020 11:59:53 +0000 (13:59 +0200)]
gdb/infrun: extract out a code piece into 'mark_non_executing_threads' function
This is a refactoring. The extracted function is placed deliberately
before 'stop_all_threads' because the function will be re-used there
in a subsequent patch for handling an exit status kind received from
a thread that GDB attempted to stop.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* infrun.c (handle_inferior_event): Extract out a piece of code
into...
(mark_non_executing_threads): ...this new function.
Change-Id: I2b088f4a724f4260cb37068264964525cf62a118
Tankut Baris Aktemur [Thu, 14 May 2020 11:59:53 +0000 (13:59 +0200)]
gdb/infrun: move a 'regcache_read_pc' call down to first use
In infrun.c's resume_1 function, move the definition of the local
variable PC down to its first use. This is useful if the thread we want
to resume is already gone with a pending exit event, because we avoid
the error we would see otherwise when trying to read the PC.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* infrun.c (resume_1): Move a 'regcache_read_pc' call down to first
use.
Tankut Baris Aktemur [Thu, 14 May 2020 11:59:53 +0000 (13:59 +0200)]
gdb: protect some 'regcache_read_pc' calls
It possible that a thread whose PC we attempt to read is already dead.
In this case, 'regcache_read_pc' errors out. This impacts the
"proceed" execution flow, where GDB quits early before having a chance
to check if there exists a pending event. To remedy, keep going with
a 0 value for the PC if 'regcache_read_pc' fails. Because the value
of PC before resuming a thread is mostly used for storing and checking
the next time the thread stops, this tolerance is expected to be
harmless for a dead thread/process.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* regcache.c (regcache_read_pc_protected): New function
implementation that returns 0 if the PC cannot read via
'regcache_read_pc'.
* infrun.c (proceed): Call 'regcache_read_pc_protected'
instead of 'regcache_read_pc'.
(keep_going_pass_signal): Ditto.
gdbsupport/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* common-regcache.h (regcache_read_pc_protected): New function
declaration.
Nick Clifton [Thu, 14 May 2020 10:26:26 +0000 (11:26 +0100)]
Update Swedish translation for the gas sub-directory and a new Serbian translation for the gold sub-directory.
Nelson Chu [Wed, 13 May 2020 08:05:45 +0000 (16:05 +0800)] 
RISC-V: Add elfNN_riscv_mkobject to initialize RISC-V tdata.
For now we only have one char pointer in RISC-V tdata, so it should be fine.
But once we need more elements in tdata, then we may get some uninitialize
or unexpected values. I do meet the same problem when extending the RISC-V
tdata.
bfd/
elfnn-riscv.c (elfNN_riscv_mkobject): New function. We need this
to initialize RISC-V tdata.
GDB Administrator [Thu, 14 May 2020 00:00:16 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Wed, 13 May 2020 19:15:13 +0000 (13:15 -0600)]
Remove ada-lang.c:align_value
I recently noticed the align_value function in ada-lang.c. This can
be removed, in favor of align_up from gdbsupport.
gdb/ChangeLog
2020-05-13 Tom Tromey <tromey@adacore.com>
* ada-lang.c (align_value): Remove.
(ada_template_to_fixed_record_type_1): Use align_up.
Tankut Baris Aktemur [Wed, 13 May 2020 12:53:37 +0000 (14:53 +0200)]
gdb: update the copyright year in async-event.[ch]
The async-event.[ch] files were introduced recently as a result of
splitting the event-loop. I believe the copyright year update was
just an oversight. So, this patch fixes that.
gdb/ChangeLog:
2020-05-13 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* async-event.c: Update the copyright year.
* async-event.h: Update the copyright year.
Nick Clifton [Wed, 13 May 2020 09:59:02 +0000 (10:59 +0100)]
Have the linker's help text include the default setting of the --hash-style option, if relevent.
PR 25979
* lexsup.c (elf_shlib_list_options): Include the default value for
the hash style in the output text.
This page took 0.060764 seconds and 4 git commands to generate.
projects / deliverable / binutils-gdb.git / log
