Jeff Law [Mon, 7 Oct 1996 22:59:04 +0000 (22:59 +0000)]
* config/tc-mn10300.h (pre_defined_registers) Remove.
(system_registers, cc_names): Likewise.
(address_registers, data_registers, other_registers): New register
arrays.
(register_name, system_register_name, cc_name): Remove.
(mn10300_reloc_prefix): Likewise.
(data_register_name): New function.
(address_register_name, other_register_name): Likewise.
(md_assemble): Rough cut at parsing operands. Remove lots of
unwanted code.
(md_apply_fix3): Disable for now.
Checkpointing today's Matsushita work.
Jeff Law [Mon, 7 Oct 1996 22:55:13 +0000 (22:55 +0000)]
Dummy .Sanitize files. Should also fix snapshot problems.
Jeff Law [Mon, 7 Oct 1996 22:53:27 +0000 (22:53 +0000)]
* mn10300.h (mn10300_opcode): Add "format" field.
(MN10300_OPERAND_*): Define.
Checkpointing today's Matsushita work.
Jeff Law [Mon, 7 Oct 1996 22:52:18 +0000 (22:52 +0000)]
* mn10300-opc.c (FMT_XX): Renumber starting at one.
(mn10300_operands): Rough cut. Enough to parse "mov" instructions
at this time.
(mn10300_opcodes): Break opcode format out into its own field.
Update many operand fields to deal with signed vs unsigned
issues. Fix one or two typos in the "mov" instruction
opcode, mask and/or operand fields.
Checkpointing today's work. Matsushita.
Ian Lance Taylor [Mon, 7 Oct 1996 21:30:26 +0000 (21:30 +0000)]
* ld.texinfo (Options): Mention .so extensions for shared
libraries.
Fred Fish [Mon, 7 Oct 1996 17:58:56 +0000 (17:58 +0000)]
* buildsym.c (finish_block): Change innerblock_anon_complaint to
print the addresses as part of the complaint. Add a complaint for
cases where the block end address is smaller than the block start
address, in case any such conditions slip through our fixup mechanism.
* symmisc.c (dump_symtab): Only print blockvector for primary
symtabs, to avoid massive duplication of output due to secondary
symtabs that point to same blockvector. Also do some minor
formatting tweaks.
Per Bothner [Mon, 7 Oct 1996 17:45:29 +0000 (17:45 +0000)]
Replace header_files global by per-objfile field.
* gdb-stabs.h (struct dbx_symfile_info): Add fields header_files,
n_header_files, n_allocated_header_files.
* stabsread.h (header_files, n_header_files, n_allocated_header_files):
Replace externs by macros HEADER_FILES, N_HEADER_FILES, and
N_ALLOCATED_HEADER_FILES.
* dbxread.c (dbx_symfile_finish): Free HEADER_FILES.
(free_header_files, init_header-files): Don't free/init headerfiles.
(various functions): Use macros instead of header_files globals.
* stabsread.c (various functions): Likewise.
Jason Merrill [Mon, 7 Oct 1996 17:18:24 +0000 (17:18 +0000)]
Sun Oct 6 22:43:06 1996 Jason Merrill <jason@yorick.cygnus.com>
* dwarf2read.c (read_tag_reference_type): New fn.
(read_type_die): Call it.
(dwarf_attr): Also look in the DIEs referred to by specification
or abstract_origin attributes.
Ian Lance Taylor [Mon, 7 Oct 1996 15:45:44 +0000 (15:45 +0000)]
* archive.c (do_slurp_coff_armap): Only treat archive as little
endian for i960 COFF.
Ian Lance Taylor [Mon, 7 Oct 1996 15:41:56 +0000 (15:41 +0000)]
Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* m68k-opc.c (plusha): Prefer encoding for m68040up, in case
m68851 wasn't reset.
Ian Lance Taylor [Mon, 7 Oct 1996 15:40:59 +0000 (15:40 +0000)]
Mon Oct 7 11:38:34 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* config/tc-m68k.c (select_control_regs): New function, extracted
out of m68k_init_after_args.
(m68k_init_after_args): Use it.
(mri_chip): Use it here as well to update set of allowed control
regs for movec.
Ian Lance Taylor [Mon, 7 Oct 1996 15:25:58 +0000 (15:25 +0000)]
* config/obj-elf.c (elf_begin): New function.
(obj_elf_section): Add the section symbol to the symbol table.
* config/obj-elf.h (obj_begin): Define.
(elf_begin): Declare.
* as.c (perform_an_assembly_pass): Call obj_begin if it is
defined.
Ian Lance Taylor [Mon, 7 Oct 1996 14:59:56 +0000 (14:59 +0000)]
* Makefile.in (ETC_SUPPORT): Add configure.
Jason Merrill [Mon, 7 Oct 1996 05:36:57 +0000 (05:36 +0000)]
Sun Oct 6 22:35:36 1996 Jason Merrill <jason@yorick.cygnus.com>
* scripttempl/elf{,mips,ppc}.sc: Add DWARF 2 sections.
Mark Alexander [Sat, 5 Oct 1996 18:27:39 +0000 (18:27 +0000)]
* rldefs.h: On Linux, include <termios.h> to fix compile error
in <termcap.h>.
Ian Lance Taylor [Fri, 4 Oct 1996 22:52:58 +0000 (22:52 +0000)]
* coffcode.h (coff_compute_section_file_positions): Adjust sofar
by the change in size of the section when EXEC_P is not set.
Ian Lance Taylor [Fri, 4 Oct 1996 22:49:57 +0000 (22:49 +0000)]
* scripttempl/m68kcoff.sc: Only set the address of .text if
RELOCATING.
Ian Lance Taylor [Fri, 4 Oct 1996 22:40:55 +0000 (22:40 +0000)]
* coff-m68k.c (coff_rtype_to_howto): Define if not defined.
(m68kcoff_rtype_to_howto): New static function.
* cf-m68klynx.c (coff_m68k_lynx_rtype_to_howto): Add the section
VMA to the addend for a PC relative reloc.
Ian Lance Taylor [Fri, 4 Oct 1996 22:38:44 +0000 (22:38 +0000)]
* config/obj-coff.c (fixup_segment): Subtract the section address
from a PC relative reloc if TC_M68K.
Jeff Law [Fri, 4 Oct 1996 22:02:43 +0000 (22:02 +0000)]
* mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
all opcodes. Very rough cut at operands for all opcodes.
Matsushita.
Ian Lance Taylor [Fri, 4 Oct 1996 20:24:34 +0000 (20:24 +0000)]
* dep-in.sed: Rework backslash loop a bit to avoid bug in sed on
HP/UX 10.20.
* Makefile.in: Rebuild dependencies.
Angela Marie Thomas [Fri, 4 Oct 1996 19:25:09 +0000 (19:25 +0000)]
use config/mh-dgux386 for i[345]86-dg-dgux host configuration file
Jeff Law [Fri, 4 Oct 1996 19:20:19 +0000 (19:20 +0000)]
* mn10300-opc.c (mn10300_opcodes): Start fleshing out the
opcode table.
Checkpointint 10300 work.
David Edelsohn [Fri, 4 Oct 1996 18:01:41 +0000 (18:01 +0000)]
* emulparams/sparcaout.sh ({BIG,LITTLE}_OUTPUT_FORMAT): Define.
* scripttempl/aout.sc ({BIG,LITTLE}_OUTPUT_FORMAT): Provide default.
(OUTPUT_FORMAT): Support bi-endian targets.
Ian Lance Taylor [Fri, 4 Oct 1996 17:50:47 +0000 (17:50 +0000)]
* dep-in.sed: Remove ../bfd/sysdep.h, since it will appear when
som.h is included.
Jeff Law [Fri, 4 Oct 1996 17:44:55 +0000 (17:44 +0000)]
* Makefile.in: Remove explicit dependencies for mn10200 and
mn10300 files.
(ALL_MACHINE_CFILES): Add cpu-mn10200.c and cpu-mn10300.c.
(BFD32_BACKENDS_CFILES): Add elf32-mn10200.c and elf32-mn10300.c
(dependencies): Rebuilt.
Ian Lance Taylor [Thu, 3 Oct 1996 23:17:36 +0000 (23:17 +0000)]
* cofflink.c (coff_link_add_symbols): Set obj_coff_keep_syms
during this function.
Ian Lance Taylor [Thu, 3 Oct 1996 22:48:20 +0000 (22:48 +0000)]
* elflink.c (_bfd_elf_create_linker_section): Only use an existing
section if the flags are compatible.
Ian Lance Taylor [Thu, 3 Oct 1996 21:43:00 +0000 (21:43 +0000)]
* binutils.texi (Target Selection): Document that you can now
specify targets using configuration triplets.
Ian Lance Taylor [Thu, 3 Oct 1996 21:36:08 +0000 (21:36 +0000)]
* configure.in: Add havevecs, and put it in tdefaults.
* mpw-config.in: Likewise.
* configure: Rebuild.
* targmatch.sed: New file; a sed script to build targmatch.h from
config.bfd.
* config.bfd: Add #if, #endif, and comments for targmatch.h.
* targets.c: Include "fnmatch.h".
(struct targmatch): Define.
(bfd_target_match): Define by including targmatch.h.
(bfd_find_target): If the target is not found by name, search for
it as a configuration triplet.
* Makefile.in: Rebuild dependencies.
(BFD32_BACKENDS): Add aout-arm.o, aout-sparcle.o, hp300bsd.o,
i386dynix.o, m68k4knetbsd.o, and riscix.o.
(BFD32_BACKENDS_CFILES): Add aout-arm.c, aout-sparcle.c,
hp300bsd.c, i386dynix.c, m68k4knetbsd.c, and riscix.c.
(HFILES): Add targmatch.h. Also, alphabetize and reindent.
(CFILES): Remove i386dynix.c and hp300bsd.c.
(targmatch.h): New target.
(do_clean): Remove targmatch.h.
* configure.in: Add BFD_NEED_DECLARATION(getenv).
* acconfig.h: Add NEED_DECLARATION_GETENV.
* configure, config.in: Rebuild.
* sysdep.h: If NEED_DECLARATION_GETENV, declare getenv.
* aout-adobe.c (aout_adobe_object_p): Don't declare getenv.
Ian Lance Taylor [Thu, 3 Oct 1996 21:17:46 +0000 (21:17 +0000)]
* Makefile.in (ALL_MACHINES): Add mn10200-dis.o, mn10200-opc.o,
mn10300-dis.o, and mn10300-opc.o.
Also add d10v and v850 files, with appropriate sanitization.
Ian Lance Taylor [Thu, 3 Oct 1996 19:16:36 +0000 (19:16 +0000)]
* config/tc-sparc.c (md_pseudo_table): Make .uahalf, .uaword, and
.uaxword available even if not OBJ_ELF.
(md_atof): Remove unused local variable wordP.
Ian Lance Taylor [Thu, 3 Oct 1996 17:53:25 +0000 (17:53 +0000)]
* fnmatch.h, fnmatch.c: Remove (now in libiberty).
* Makefile.in: Rebuild dependencies.
(CFILES): Remove fnmatch.c.
(HFILES): Remove fnmatch.h.
(OFILES): Remove fnmatch.o.
Ian Lance Taylor [Thu, 3 Oct 1996 17:45:45 +0000 (17:45 +0000)]
* fnmatch.h: New file.
Fred Fish [Thu, 3 Oct 1996 17:05:00 +0000 (17:05 +0000)]
* inferior.h (IN_SIGTRAMP): Pass pc to SIGTRAMP_START and
SIGTRAMP_END.
* config/i386/tm-i386os9k.h (SIGTRAMP_START, SIGTRAMP_END):
Define with dummy pc arg.
* config/m68k/tm-nbsd.h: Ditto.
* doc/gdbint.texinfo: Document that SIGTRAMP_START and
SIGTRAMP_END are macros that take an single argument.
Jeff Law [Thu, 3 Oct 1996 16:42:22 +0000 (16:42 +0000)]
Grrr. The mn10200 and mn10300 are _not_ similar enough to easily support
with a single generic configuration. So break them up into two different
configurations. See the individual ChangeLogs for additional detail.
Jason Molenda [Thu, 3 Oct 1996 07:16:56 +0000 (07:16 +0000)]
* Makefile.in (mostlyclean): Move config.log to distclean.
Jason Molenda [Thu, 3 Oct 1996 06:58:15 +0000 (06:58 +0000)]
* Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
Geoffrey Noer [Thu, 3 Oct 1996 06:55:39 +0000 (06:55 +0000)]
Wed Oct 2 23:45:25 1996 Geoffrey Noer <noer@cygnus.com>
* emultmpl/pe.em: increase size of stack reserve to 0x2000000
(necessary in order to compile parse.c in gcc sources under NT)
Jason Molenda [Thu, 3 Oct 1996 06:40:32 +0000 (06:40 +0000)]
* Makefile.in (mostlyclean): Move config.log to distclean.
Jason Molenda [Thu, 3 Oct 1996 06:38:49 +0000 (06:38 +0000)]
* Makefile.in (clean): Remove config.log.
Jason Molenda [Thu, 3 Oct 1996 06:37:32 +0000 (06:37 +0000)]
* Makefile.in (do_clean): Move config.log to do_distclean.
Jeff Law [Thu, 3 Oct 1996 06:19:06 +0000 (06:19 +0000)]
* config/tc-mn10x00.c, config/tc-mn10x00.h: New files
for Matsushita MN10x00 support.
* configure.in: Recognize mn10x00-*-*
* configure: Rebuilt.
More Matsushita stuff.
Jeff Law [Thu, 3 Oct 1996 06:16:13 +0000 (06:16 +0000)]
* gas/mn10x00: New directory for Matsushita 10x00 tests.
Keep stubbing out Matsushita stuff.
Jeff Law [Thu, 3 Oct 1996 05:56:42 +0000 (05:56 +0000)]
* configure.in: Add lots of stuff to noconfigdirs for
the mn10x00 targets.
Jeff Law [Thu, 3 Oct 1996 05:31:01 +0000 (05:31 +0000)]
* mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
MN10x00 processors.
* disassemble (ARCH_mn10x00): Define.
(disassembler): Handle bfd_arch_mn10x00.
* configure.in: Recognize bfd_mn10x00_arch.
* configure: Rebuilt.
Continue stubbing out for Matsushita work.
Jeff Law [Thu, 3 Oct 1996 04:48:16 +0000 (04:48 +0000)]
Add missing copyright.
Jeff Law [Thu, 3 Oct 1996 04:31:40 +0000 (04:31 +0000)]
* config.sub, configure.in: Add mn10x00 support.
More Matsushita work.
Jeff Law [Thu, 3 Oct 1996 03:56:20 +0000 (03:56 +0000)]
* cpu-mn10x00.c, elf32-mn10x00.c: New files.
* Makefile.in (ALL_MACHINES): Add cpu-mn10x00.o.
(BFD32_BACKENDS): Similarly for elf32-mn10x00.o.
(elf32-mn10x00.o): Add dependencies.
* archures.c (enum bfd_architecture): Add bfd_arch_mn10x00.
(bfd_mn10x00_arch): Declare.
(bfd_archures_list): Add bfd_mn10x00_arch.
* config.bfd: Add mn10x00-*-*.
* configure.in: Add bfd_elf32_mn10x00_vec.
* elf.c (prep_headers): Handle bfd_arch_mn10x00.
* targets.c (bfd_elf32_mn10x00_vec): Declare.
(bfd_target_vector): Add bfd_elf32_mn10x00_vec.
* bfd-in2.h, configure: Rebuilt.
Stubbing out Matsushita support.
Jeff Law [Thu, 3 Oct 1996 03:32:51 +0000 (03:32 +0000)]
* mn10x00.h: New file.
Matsushita.
Jeff Law [Thu, 3 Oct 1996 03:27:52 +0000 (03:27 +0000)]
* common.h (EM_CYGNUS_MN10x00): Define.
Matsushita.
Jeff Law [Thu, 3 Oct 1996 03:27:10 +0000 (03:27 +0000)]
* dis-asm.h (print_insn_mn10x00): Declare.
Getting started on Matsushita.
Ian Lance Taylor [Wed, 2 Oct 1996 20:41:36 +0000 (20:41 +0000)]
* freebsd.h (N_GET_MAGIC_NET): Don't use ntohl.
(N_GETMID_NET, N_GETFLAG_NET): Likewise.
(NO_SWAP_MAGIC): Don't define.
(SWAP_MAGIC): Define.
Ian Lance Taylor [Wed, 2 Oct 1996 19:55:33 +0000 (19:55 +0000)]
Wed Oct 2 15:54:03 1996 Klaus Kaempf <kkaempf@progis.de>
* obj-evax.h: move openvms definitions from here to tc-alpha.c.
* tc-alpha.c: add support for vms_case_hack like in vax/vms.
(load_expression): track clobbering of base reg before jmp/jsr.
(s_alpha_file): pass case_hack flags and source filename via
symbol table to bfd.
* tc-alpha.h (TC_CONS_FIX_NEW): define
Ian Lance Taylor [Wed, 2 Oct 1996 19:53:12 +0000 (19:53 +0000)]
Wed Oct 2 15:52:36 1996 Klaus Kaempf <kkaempf@progis.de>
* make-all.com: Call conf-a-gas, not config-a-gas.
Ian Lance Taylor [Wed, 2 Oct 1996 19:50:19 +0000 (19:50 +0000)]
Wed Oct 2 15:49:16 1996 Klaus Kaempf <kkaempf@progis.de>
* makefile.vms: Bump version date.
Ian Lance Taylor [Wed, 2 Oct 1996 19:49:01 +0000 (19:49 +0000)]
Wed Oct 2 15:46:45 1996 Klaus Kaempf <kkaempf@progis.de>
openVMS/Alpha: Provide filename and case_hack flags via
symbol table from gas.
Add case_hack code for symbol output from vax/vms.
* evax-alpha.c (evax_initialize): Remove filename handling,
filename is provided via symbol table.
(evax_get_symtab): Use local symbol count when setting up table.
* evax-egsd.c (_bfd_evax_slurp_egsd): Print correct name when
debugging.
(_bfd_evax_write_egsd): Skip file name symbol.
* evax-emh.c (get_vms_time_string): Local function now.
(_bfd_evax_write_emh): Extract source filename and case_hack flags
from symbol table.
* evax_write_etir (_bfd_evax_write_etir): Pass all symbol names
through _bfd_evax_case_hack_symbol.
* evax-misc.c (hash_string, _bfd_evax_case_hack_symbol): New
functions.
(_bfd_evax_basename): Removed.
(_bfd_get_vms_time_string): Moved to evax-emh.c.
* evax.h (evax_private_data_struct): Remove filename.
(flag_hash_long_names, flag_show_after_trunc,
flag_no_hash_mixed_case, vms_name_mapping): New flags for
vms_case_hack.
Ian Lance Taylor [Wed, 2 Oct 1996 19:23:38 +0000 (19:23 +0000)]
* sparc.c (find_call): Align p_lowpc to avoid bus error.
Ian Lance Taylor [Wed, 2 Oct 1996 18:50:32 +0000 (18:50 +0000)]
* lexsup.c (ld_options): Fix typo in --rpath-link description.
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Suggest
--rpath if a needed library is not found.
Ian Lance Taylor [Wed, 2 Oct 1996 16:02:56 +0000 (16:02 +0000)]
* cofflink.c (_bfd_coff_link_input_bfd): Don't crash if there is
no hash table entry for a global symbol.
Jason Molenda [Wed, 2 Oct 1996 07:57:18 +0000 (07:57 +0000)]
* Makefile.in (clean): Remove config.log.
Ian Lance Taylor [Tue, 1 Oct 1996 22:53:38 +0000 (22:53 +0000)]
* ld.texinfo (Options): Give more detail on -l option.
PR 10418.
Ian Lance Taylor [Tue, 1 Oct 1996 22:31:27 +0000 (22:31 +0000)]
* scripttempl/elfmips.sc: Handle CREATE_SHLIB the same way that
elf.sc does, so that glibc works better.
Ian Lance Taylor [Tue, 1 Oct 1996 21:57:47 +0000 (21:57 +0000)]
* cofflink.c (coff_link_add_symbols): Don't override a meaningful
symbol type with T_NULL. Warn if symbol type changes. Based on
patch from Philippe De Muyter <phdm@labauto1.ulb.ac.be>.
Ian Lance Taylor [Tue, 1 Oct 1996 21:51:15 +0000 (21:51 +0000)]
* read.c (s_macro): Warn if a macro has the same name as a
pseudo-op.
(s_space): In m68k MRI mode, align to a word boundary.
* macro.c (define_macro): Add namep parameter. Change all
callers.
* macro.h (define_macro): Update declaration.
Ian Lance Taylor [Tue, 1 Oct 1996 20:19:05 +0000 (20:19 +0000)]
Tue Oct 1 16:17:33 1996 Joel Sherrill <joel@oarcorp.com>
* configure.tgt (mips*-*-rtems*): New target, like mips*-*-elf*.
Ian Lance Taylor [Tue, 1 Oct 1996 20:17:23 +0000 (20:17 +0000)]
Tue Oct 1 16:16:01 1996 Joel Sherrill <joel@oarcorp.com>
* configure.in (mips-*-rtems*): New target, like mips-*-elf*.
* configure: Rebuild.
Ian Lance Taylor [Tue, 1 Oct 1996 20:15:48 +0000 (20:15 +0000)]
Tue Oct 1 16:14:22 1996 Joel Sherrill <joel@oarcorp.com>
* config.bfd (mips*-*-rtems*): New target, like mips*-*-elf*.
Ian Lance Taylor [Tue, 1 Oct 1996 19:58:36 +0000 (19:58 +0000)]
* gprof.c (usage): Print bug report address.
(main): Change version printing to match current GNU standards.
Ian Lance Taylor [Tue, 1 Oct 1996 19:55:02 +0000 (19:55 +0000)]
update copyright
Ian Lance Taylor [Tue, 1 Oct 1996 19:53:02 +0000 (19:53 +0000)]
* lib/ld.exp (default_ld_version): Fix for current version
printing.
Ian Lance Taylor [Tue, 1 Oct 1996 19:53:01 +0000 (19:53 +0000)]
* ldver.c (ld_program_version): New variable.
(ldversion): Use it.
* ldver.h (ld_program_version): Declare.
* lexsup.c (ld_options): Handle --dll-verbose like --verbose, not
--version. Change --version handling to match current GNU
standards.
(help): Print bug report address.
Ian Lance Taylor [Tue, 1 Oct 1996 19:39:21 +0000 (19:39 +0000)]
* lib/gas-defs.exp (gas_version): Fix for current version
printing.
Ian Lance Taylor [Tue, 1 Oct 1996 19:31:06 +0000 (19:31 +0000)]
* as.c (show_usage): Print bug report address.
(parse_args): Change version printing to match current GNU
standards.
* gasp.c (show_usage): Print bug report address.
(main): Change version printing to match current GNU standards.
Ian Lance Taylor [Tue, 1 Oct 1996 19:11:13 +0000 (19:11 +0000)]
* lib/utils-lib.exp (binutil_version): Fix for current version
printing.
Ian Lance Taylor [Tue, 1 Oct 1996 19:10:40 +0000 (19:10 +0000)]
* version.c (print_version): New function.
* bucomm.h (print_version): Declare.
* ar.c (program_version): Don't declare.
(do_show_version): Remove.
(usage): Add help parameter. Print bug report address.
(main): Set is_ranlib at start. Check for --help and --version.
Call print_version, not do_show_version.
* nlmconv.c (program_version): Don't declare.
(main): Call print_version.
(show_usage): Print bug report address.
* nm.c (program_version, print_version): Don't declare.
(usage): Print bug report address.
(main): Call print_version.
* objcopy.c (program_version): Don't declare.
(copy_usage): Print bug report address.
(strip_usage): Likewise.
(strip_main): Call print_version.
(copy_main): Likewise.
* objdump.c (program_version): Don't declare.
(usage): Print bug report address.
(main): Call print_version.
* size.c (program_version): Don't declare.
(usage): Print bug report address.
(main): Call print_version.
* strings.c (program_version): Don't declare.
(main): Call print_version.
(usage): Print bug report address.
* Makefile.in: Update dependencies.
Ian Lance Taylor [Tue, 1 Oct 1996 17:59:56 +0000 (17:59 +0000)]
* config/tc-m68k.c (init_table): Correct access control unit
register numbers. From Ken Rose <rose@netcom.com>.
Ian Lance Taylor [Tue, 1 Oct 1996 16:41:19 +0000 (16:41 +0000)]
* config/tc-alpha.c: Add some static function prototypes.
(alpha_macros): Move to top of file. Make static.
(alpha_num_macros): Move to top of file.
Stu Grossman [Tue, 1 Oct 1996 16:38:44 +0000 (16:38 +0000)]
* tc-v850.h: Define LOCAL_LABEL to recognise _.L_* symbols
generated by DWARF.
Ian Lance Taylor [Tue, 1 Oct 1996 16:33:01 +0000 (16:33 +0000)]
* elflink.h (elf_link_add_object_symbols): Only put a symbol from
a dynamic object in the dynamic symbol table if it is referenced
or defined by a regular object.
PR 10711.
Ian Lance Taylor [Tue, 1 Oct 1996 14:50:19 +0000 (14:50 +0000)]
* i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
accordingly. Don't declare functions using op_rtn.
Remove ANSI C constructs.
Stan Shebs [Tue, 1 Oct 1996 05:15:10 +0000 (05:15 +0000)]
Fix a stutter
Fix a stutter
Stan Shebs [Tue, 1 Oct 1996 05:09:00 +0000 (05:09 +0000)]
* mpw-mh-mpw (EXTRALIBS_PPC_XCOFF): New, was EXTRALIBS_PPC.
(EXTRALIBS_PPC): Use shared libraries instead of xcoff.
Fred Fish [Tue, 1 Oct 1996 03:29:45 +0000 (03:29 +0000)]
* gdb.base/interrupt.exp: Add i*86-*-linux* setup_xfail for
"p func1 ()" and note that rests of tests are skipped.
* gdb.base/corefile.exp: Add i*86-*-linux* and m68*-*-hpux*
setup_xfails for "print func2::coremaker_local".
Add i*86-*-linux* setup_xfail for "backtrace in corefile.exp".
* gdb.base/mips_pro.exp: Restart gdb in this test so it isn't
affected by the previous run test.
* gdb.chill/misc.exp: Add m68*-*-hpux* setup_xfails for
"print array () ubyte (foo)" and "print/x array () byte (\$i)"
* gdb.chill/pr-8742.exp: Add m68*-*-hpux* setup_xfails for
"pass int powerset tuple" and "pass modeless int powerset tuple".
* gdb.chill/tests2.exp: Add m68*-*-hpux* setup xfails for
"real write 4" and "real write 8".
* gdb.shill/tuples.exp: Add i*86-*-linux* and m68*-*-hpux*
setup_xfails for "print vs1 after tuple assign 2",
"print \$i after tuple assign 2", and
"print vs2 after tuple assign 2".
* lib/gdb.exp (gdb_test): When a gdb aborts, print a more
meaningful error message and return -1 so the caller can
suppress further tests and avoid a cascade of errors.
Fred Fish [Tue, 1 Oct 1996 03:04:13 +0000 (03:04 +0000)]
* defs.h: Remove define of PRIVATE_XMALLOC.
Fred Fish [Tue, 1 Oct 1996 03:01:33 +0000 (03:01 +0000)]
* libiberty.h: Remove #ifndef PRIVATE_XMALLOC.
Jackie Smith Cashion [Tue, 1 Oct 1996 00:33:00 +0000 (00:33 +0000)]
Tue Oct 1 01:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
* configure.in (noconfigdirs): Don't build libgloss for arm-coff
targets.
Stu Grossman [Mon, 30 Sep 1996 22:42:23 +0000 (22:42 +0000)]
* config/v850/tm-v850.h: Use distinct register for PC, not EIPC.
Stan Shebs [Mon, 30 Sep 1996 21:41:07 +0000 (21:41 +0000)]
Add mpw-install to keep_these_too
David Edelsohn [Mon, 30 Sep 1996 21:10:54 +0000 (21:10 +0000)]
m32r [work in progress]
David Edelsohn [Mon, 30 Sep 1996 19:18:04 +0000 (19:18 +0000)]
m32r support
David Edelsohn [Mon, 30 Sep 1996 19:16:26 +0000 (19:16 +0000)]
* Makefile.in (em32relf.c): Add rule for.
* configure.tgt (m32r-*-*): Recognize.
* emulparams/m32relf.sh: New file.
Jeff Law [Mon, 30 Sep 1996 17:16:35 +0000 (17:16 +0000)]
* top.c (execute_control_command): Free values from while_control
and if_control conditions after evaluation to avoid storage leaks.
From Peter Schauer.
Fixes 10442.
David Edelsohn [Sun, 29 Sep 1996 14:57:04 +0000 (14:57 +0000)]
* gas/sparc/splet.d: Fix typo in cpusha result.
Fred Fish [Sat, 28 Sep 1996 15:22:09 +0000 (15:22 +0000)]
Make sanitize-v850 lines into comments and rebuild configure
Fred Fish [Sat, 28 Sep 1996 15:14:27 +0000 (15:14 +0000)]
Remade configure, which appears to have gotten out of sync
with the current files it is built from.
Stu Grossman [Sat, 28 Sep 1996 01:38:45 +0000 (01:38 +0000)]
* gencode.c (write_opcodes): Output hex values for opcode mask
and patterns.
* interp.c (sim_resume): Save and restore PC from the appropriate
register.
* (sim_fetch_register sim_store_register): Fix byte-order problem
with reading and writing registers.
* simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
Stu Grossman [Sat, 28 Sep 1996 01:23:45 +0000 (01:23 +0000)]
Sanitize for v850.
Stu Grossman [Sat, 28 Sep 1996 01:16:06 +0000 (01:16 +0000)]
Sanitize v850 shit.
Stu Grossman [Sat, 28 Sep 1996 01:11:34 +0000 (01:11 +0000)]
Add configure.
This page took 0.039901 seconds and 4 git commands to generate.