Ivan Safonov [Tue, 27 Oct 2015 15:26:00 +0000 (22:26 +0700)]
staging: rtl8188eu: operator = replaced by += in loop increment
x = x + a and x += a equivalen, but second preferably.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:25:39 +0000 (22:25 +0700)]
staging: rtl8188eu: occurrence of the 5 GHz code marked
Channel numbers greater than 14 are used here, which are possible only
for the 5 GHz frequency.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:24:24 +0000 (22:24 +0700)]
staging: rtl8188eu: increment placed into for loop header
The increment at the end of the cycle, and it can be placed in the loop header.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:23:57 +0000 (22:23 +0700)]
staging: rtl8188eu: while loop replaced by for loop in rtw_restruct_wmm_ie
This patch replaces while loop with for loop, because the initial condition and the increment clearly and briefly defined for this loop.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:23:14 +0000 (22:23 +0700)]
staging: rtl8188eu: unused MIN macro removed
This patch removes unused MIN macro from include/rtw_security.h.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:23:14 +0000 (22:23 +0700)]
staging: rtl8188eu: unused MEM_ALIGNMENT_OFFSET and MEM_ALIGNMENT_PADDING macros removed
This patch removes unused MEM_ALIGNMENT_OFFSET and MEM_ALIGNMENT_PADDING macros
from include/basic_types.h.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:21:28 +0000 (22:21 +0700)]
staging: rtl8188eu: unused SUCCESS and FAIL macros removed
This patch removes unused SUCCESS and FAIL macros in include/basic_types.h.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:20:28 +0000 (22:20 +0700)]
staging: rtl8188eu: abs kernel macro used in simularity_compare function
abs macro is useful for determining the difference between the two integers.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:19:50 +0000 (22:19 +0700)]
staging: rtl8188eu: ternary operator (?:) replaced by min_t kernel macro
min_t macro better conveys the meaning of the code.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:18:10 +0000 (22:18 +0700)]
staging: rtl8188eu: ternary operator (?:) replaced by min_t kernel macro
min_t macro better conveys the meaning of the code.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:16:25 +0000 (22:16 +0700)]
staging: rtl8188eu: ternary operator (?:) replaced by min/max kernel macro
min (or max) kernel macro better conveys the meaning of the code.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:15:31 +0000 (22:15 +0700)]
staging: rtl8188eu: clamp kernel macro used in proc_get_rx_signal
To limit the range of integers there is clamp macro.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 27 Oct 2015 15:13:57 +0000 (22:13 +0700)]
staging: rtl8188eu: sizeof/sizeof replaced by ARRAY_SIZE kernel macro
ARRAY_SIZE shorter and more difficult to create bugs.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bogicevic Sasa [Tue, 27 Oct 2015 11:24:28 +0000 (12:24 +0100)]
drivers:staging:wlan_ng Fix no space is necessary after a cast
This fixes "No space is necessary after a cast" messages from
checkpatch.pl
Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomeu Vizoso [Tue, 27 Oct 2015 14:27:26 +0000 (15:27 +0100)]
staging: board: Set PM domain before probe
PM domains shouldn't be modified after a device is probed, so set it
before device registration to be sure of that.
In the future the PM domain pointer will be set through a setter that
will WARN if the device has been probed already.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:25 +0000 (16:59 +0000)]
staging: comedi: comedi_test: implement commands on AO subdevice
Implement COMEDI asynchronous commands on the fake analog output
subdevice. This is useful for testing asynchronous commands in the
"write" direction when no real hardware is available.
A normal kernel timer is used to drive the command. The new timer
expiry function `waveform_ao_timer()` handles whole "scans" at a time
according to the number of scan period that have elapsed since the last
scan. Data for each channel in the scan is written to the internal
loopback array `devpriv->ao_loopbacks[]` and can be read back on the
analog input channels. However, if several scan periods are outstanding
in the timer expiry function, only the latest available scan data is
written to the loopback array in order to save processing time. The
expiry function also checks for underrun conditions, and checks for
normal termination of the asynchronous command when a "stop" scan count
is reached.
After the command is tested by `waveform_ao_cmdtest()` and set up by
`waveform_ao_cmd()`, it is not started until an internal trigger
function `waveform_ao_inttrig_start()` is called as a result of the user
performing an `INSN_INTTRIG` instruction on the subdevice. The command
is stopped when the "cancel" handler `waveform_ao_cancel()` is called.
This may be due to the command terminating due to completion or an
error, or as a result of the user cancelling the command.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:24 +0000 (16:59 +0000)]
staging: comedi: comedi_test: rename waveform_ai_interrupt()
`waveform_ai_interrupt()` is a timer expiry function used to generate
fake waveform data for an analog input subdevice. Rename it to
`waveform_ai_timer()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:23 +0000 (16:59 +0000)]
staging: comedi: comedi_test: handle partial scans in timer routine
For asynchronous command handling on the analog input subdevice, a
kernel timer routine is used to generate the fake waveform data. A
"scan" consists of a number of conversions separated in time by a
conversion period. Successive scans are separated in time by a scan
period, which is at least the conversion period multiplied by the number
of conversions per scan. Currently, the timer routine does not generate
any data until the end of a scan period, generating whole scans of data
at a time. Change it to generate data at the end of each conversion
period, with an extra delay after the final conversion in each scan if
necessary. Use new member `ai_convert_time` in the private data
structure `struct waveform_private` to keep track of when the next
conversion is due. This replaces the old member `ai_last_scan_time`
which kept track of the time of the previous scan.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:22 +0000 (16:59 +0000)]
staging: comedi: comedi_test: allow read-back of AO channels
COMEDI drivers often allow the last value written to a channel on an
analog output subdevice to be read back via the "insn_read" handler.
The "comedi_test" driver does not currently support that. It is a bit
special because it loops back the last values written to the channel on
the analog output subdevice to be read back via corresponding channels
on the analog input subdevice. The "insn_read" handler for the analog
input subdevice is `waveform_ai_insn_read()`. Set that as the
"insn_read" handler for the analog output subdevice as well.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:21 +0000 (16:59 +0000)]
staging: comedi: comedi_test: use unsigned short for loopback values
The last sample values written to the AO subdevice channels by its
"insn_write" handler `waveform_ao_insn_write()` are stored in the member
array `ao_loopbacks[]` in the device private data `struct
waveform_private`. They can be read back via the "insn_read" handler of
the AI subdevice `waveform_ai_insn_read()`. As the stored sample values
are only 16 bits wide, change the type of the `ao_loopbacks[]` member to
`unsigned short` to save some space.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:20 +0000 (16:59 +0000)]
staging: comedi: comedi_test: make timer rate similar to scan rate
The asynchronous command handling for the analog input subdevice uses a
kernel timer which expires approximately `HZ` times a second. However,
it only needs to do anything after each scan period. Set the timer to
expire just after the next scan period.
Although the timer expiry function `waveform_ai_interrupt()` uses
precise time values to generate the fake waveforms used to generate the
data, those time values are constructed in a precise sequence, and do
not depend on the time the timer expiry function is actually called. So
the timer expiry rate does not have to be very precise.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:19 +0000 (16:59 +0000)]
staging: comedi: comedi_test: rename waveform members
Rename the members `struct waveform_private` associated with fake
waveform generation. The affected members are `uvolt_amplitude` -->
`wf_amplitude` (the amplitude of the waveform), `usec_period` -->
`wf_period` (the period of the waveform), and `usec_current` -->
`wf_current` (the current time within a waveform period).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:18 +0000 (16:59 +0000)]
staging: comedi: comedi_test: rename members for AI commands
Rename the members of `struct waveform_private` that are used to handle
AI commands, apart from those members used to control fake waveform
generation. The renames are `timer` --> `ai_timer`, `scan_period` -->
`ai_scan_period`, and `convert_period` --> `ai_convert_period`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:17 +0000 (16:59 +0000)]
staging: comedi: comedi_test: simplify time since last AI scan
The private data structure `struct waveform_private` currently uses
member `last` to remember the time of the last timer interrupt, and the
member `usec_remainder` to keep track of how far into a simulated scan
the interrupt occurred. Replace these with a single new member
`ai_last_scan_time` that records the time of the last scan. This
simplifies the calculation of the number of scans to simulate in the
timer routine, `waveform_ai_interrupt()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:16 +0000 (16:59 +0000)]
staging: comedi: comedi_test: use unsigned int for waveform timing
Use `unsigned int` instead of `unsigned long` to hold the period of the
fake waveform generator and the current time within each waveform. The
waveform period will be no more than `INT_MAX` and the current time
within the waveform (prior to the modulo operation to bring it actually
within the waveform period) will be no more than `INT_MAX + UINT_MAX /
1000`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:15 +0000 (16:59 +0000)]
staging: comedi: comedi_test: move modulo operations for waveform
The fake waveform generator functions, `fake_sawtooth()` and
`fake_squarewave()`, called from `fake_waveform()`, have a
`current_time` parameter which is the time since the start of a waveform
period. The parameter value may be greater than the waveform period so
they do a modulo operation to bring it into range. Do the modulo
operations outside the functions in `waveform_ai_interrupt()` so that
the waveform generator functions always get a `current_time` parameter
less than the waveform period and do not have to do the modulo operation
themselves. Also, only do the modulo operations when the time since the
start of a waveform exceeds the waveform period. Usually, several
samples are produced in each waveform period and modulo operations are
typically more expensive than a simple comparison.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:14 +0000 (16:59 +0000)]
staging: comedi: comedi_test: support scan_begin_src == TRIG_FOLLOW
It is quite common for COMEDI subdevices that support commands to
support setting `scan_begin_src` to `TRIG_FOLLOW`. This means the next
scan begins once all conversions in the current scan are complete.
Support the following timing combinations for the AI subdevice:
scan_begin_src == TRIG_TIMER && convert_src == TRIG_TIMER
scan_begin_src == TRIG_TIMER && convert_src == TRIG_NOW
scan_begin_src == TRIG_FOLLOW && convert_src == TRIG_TIMER
The actual scan period in microseconds is stored in the `scan_period`
member of the private data structure `struct waveform_private`. An
`unsigned int` is still wide enough, because the conversion period is no
more than `UINT_MAX / 1000` microseconds and the number of conversions
is no more than 16 (`N_CHANS * 2`).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:13 +0000 (16:59 +0000)]
staging: comedi: comedi_test: limit maximum convert_arg
When testing the parameters for setting up an asynchronous command on
the AI subdevice, limit the maximum conversion period
(`cmd->convert_arg`) so that the number of conversions in a scan
(`cmd->scan_end_arg`, same as `cmd->chanlist_len`) multiplied by the
conversion period fits within an `unsigned int`, as that is used to
limit the minimum scan period (`cmd->scan_begin_arg`).
Also ensure rounding of the conversion period and scan period to the
nearest microsecond both fit in an `unsigned int`. Do all this in stage
4 ("fix up any arguments") of the command testing.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:12 +0000 (16:59 +0000)]
staging: comedi: comedi_test: remove nano_per_micro
The `static const int nano_per_micro` variable is set to 1000, the
number of nanoseconds in a microsecond. Remove it and use the
`NSEC_PER_USEC` macro from <linux/time.h> instead.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:11 +0000 (16:59 +0000)]
staging: comedi: comedi_test: saturate fake waveform values
While an asynchronous command is running on the analog input subdevice,
fake waveform generators are connected to each channel to provide the
input voltages that are converted to sample value. Channel 0 is
connected to a sawtooth generator, channel 1 is connected to a
squarewave generator, and the remaining channels are connected to a
flatline generator. The non-flatline generators share the same
amplitude (in microvolts) and period (in microseconds) which are
configured when the COMEDI device is attached. All waveforms are
centered around 0 microvolts and the non-flatline waveforms go between
-amplitude and +amplitude.
It is possible for the waveforms to swing outside the input range of the
channels to which they are connected. When that happens, the sample
values resulting from simulated A-to-D conversion will wrap around due
to integer overflow. Prevent that by clamping the sample values that
would go out of range. This is closer to how a real hardware device
would behave (assuming the input voltage is not high enough to damage
the hardware!).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 27 Oct 2015 16:59:10 +0000 (16:59 +0000)]
staging: comedi: comedi_test: reformat multi-line comments
Use the preferred style for multi-line comments.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Gromm [Wed, 28 Oct 2015 14:14:35 +0000 (15:14 +0100)]
staging: most: remove exclusive wait_queue
This patch removes the unnecessary wait_queue that has exclusively been
used for the poll function and its poll_table. Instead, an already
existing one is used.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Gromm [Wed, 28 Oct 2015 14:49:15 +0000 (15:49 +0100)]
staging: most: hdm-dim2: use min_t()
This patch replaces the usage of min() by min_t().
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Ciornei [Wed, 28 Oct 2015 23:01:55 +0000 (01:01 +0200)]
staging: iio: accel: add bracket on all branches of the if/else
This patch adds brackets on all of the conditional branches in
order to follow the linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Ciornei [Wed, 28 Oct 2015 23:01:54 +0000 (01:01 +0200)]
staging: iio: accel: place logical operators on the previous line
This patch moves the logical operators on the previous line in order
to follow the linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Ciornei [Wed, 28 Oct 2015 23:01:53 +0000 (01:01 +0200)]
staging: iio: accel: remove unwanted blank lines
This patch removes unwanted blank lines in order to follow
the linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Ciornei [Wed, 28 Oct 2015 23:01:52 +0000 (01:01 +0200)]
staging: iio: accel: fix block comments alignment
This patch properly aligns the block comment in order
to follow the linux coding style convetions.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Ciornei [Wed, 28 Oct 2015 23:01:51 +0000 (01:01 +0200)]
staging: iio: accel: add blank lines after function definitions
This patch add blank lines after functions definitions in
order to follow the linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Ciornei [Wed, 28 Oct 2015 23:01:50 +0000 (01:01 +0200)]
staging: iio: accel: change uint8_t to u8
This patch changes uint8_t type to preferred kernel
type u8 in order to follow the linux coding style
conventions.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Ciornei [Wed, 28 Oct 2015 23:01:49 +0000 (01:01 +0200)]
staging: iio: accel: properly align function arguments
This patch properly aligns the function arguments or
its parameters in order to match the open bracket.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Ciornei [Wed, 28 Oct 2015 23:01:48 +0000 (01:01 +0200)]
staging: iio: accel: add spaces aroung binary operators
This patch adds spaces around binary operators such as '*',
'/', '+' in order to improve readability.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Punit Vara [Wed, 28 Oct 2015 20:23:30 +0000 (01:53 +0530)]
Staging: wilc1000: Prefer eth_broadcast_addr over memset()
This patch is to the host_interface.c that fixes up following
warning by checkpatch:
-prefer eth_broadcast_addr() over memset()
Signed-off-by: Punit Vara <punitvara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:28 +0000 (08:19 +0900)]
staging: wilc1000: fix line over 80 characters
This patch fixes line over 80 characters found by checkpatch.
WARNING: line over 80 characters
FILE: drivers/staging/wilc1000/host_interface.h:424:
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:27 +0000 (08:19 +0900)]
staging: wilc1000: replace kmalloc/memcpy with kmemdup
This patch replaces kmalloc followed by memcpy with kmemdup.
It is also added error checking to return -ENOMEM when kmemdup is
failed.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:26 +0000 (08:19 +0900)]
staging: wilc1000: rename tenuAuth_type in host_int_add_wep_key_bss_ap
This patch changes tenuAuth_type to auth_type that is sixth argument of
this function to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:25 +0000 (08:19 +0900)]
staging: wilc1000: rename u8mode in host_int_add_wep_key_bss_ap
This patch changes u8mode to mode that is fifth argument of this
function to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:24 +0000 (08:19 +0900)]
staging: wilc1000: rename u8Keyidx in host_int_add_wep_key_bss_ap
This patch changes u8Keyidx to index that is fourth argument of this
function to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:23 +0000 (08:19 +0900)]
staging: wilc1000: rename u8WepKeylen in host_int_add_wep_key_bss_ap
This patch changes u8WepKeylen to len that is third argument of this
function to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:22 +0000 (08:19 +0900)]
staging: wilc1000: rename pu8WepKey in host_int_add_wep_key_bss_ap
This patch changes pu8WepKey to key that is second argument of this
function to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:21 +0000 (08:19 +0900)]
staging: wilc1000: replace u8 with int.
This patch changes data type of variable i from u8 to int.
It is used as index of an array to print its content. It's better
to use as data type of int.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:20 +0000 (08:19 +0900)]
staging: wilc1000: fix parameter name of function declaration
This patch changes struct host_if_drv of host_int_add_wep_key_bss_ap
function declaration from hWFIDrv to hif_drv.
With this change, first parameter name of this function declaration and
definition has same name as hif_drv.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 23:19:19 +0000 (08:19 +0900)]
staging: wilc1000: fix return type of host_int_add_wep_key_bss_ap
This patch changes return type of host_int_add_wep_key_bss_ap from s32
to int. The result variable gets return value from wilc_mq_send that has
return type of int. It should be changed return type of this function as
well as data type of result variable.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 11:40:38 +0000 (20:40 +0900)]
staging: wilc1000: fix line over 80 characters
This patch fixes line over 80 characters found by checkpatch.
WARNING: line over 80 characters
FILE: drivers/staging/wilc1000/host_interface.h:408:
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 11:40:37 +0000 (20:40 +0900)]
staging: wilc1000: replace kmalloc/memcpy with kmemdup
This patch replaces kmalloc followed by memcpy with kmemdup.
It is also added error checking of kmemdup.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 11:40:36 +0000 (20:40 +0900)]
staging: wilc1000: rename u8Keyidx in host_int_add_wep_key_bss_sta
This patch changes u8Keyidx to index that is fourth argument of
host_int_add_wep_key_bss_sta to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 11:40:35 +0000 (20:40 +0900)]
staging: wilc1000: rename u8WepKeylen in host_int_add_wep_key_bss_sta
This patch changes u8WepKeylen to len that is third argument of
host_int_add_wep_key_bss_sta to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 11:40:34 +0000 (20:40 +0900)]
staging: wilc1000: rename pu8WepKey in host_int_add_wep_key_bss_sta
This patch changes pu8WepKey to key that is second argument of
host_int_add_wep_key_bss_sta to avoid camelcase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 11:40:33 +0000 (20:40 +0900)]
staging: wilc1000: fix parameter name of function declaration
This patch changes struct host_if_drv of host_int_add_wep_key_bss_sta
function declaration from hWFIDrv to hif_drv.
With this change, first parameter name of this function declaration and
definition has same name as hif_drv.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Tue, 27 Oct 2015 11:40:32 +0000 (20:40 +0900)]
staging: wilc1000: fix return type of host_int_add_wep_key_bss_sta
This patch changes return type of host_int_add_wep_key_bss_sta from s32
to int. The result variable gets return value from wilc_mq_send that has
return type of int. It should be changed return type of this function
as well as data type of result variable.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shivani Bhardwaj [Wed, 28 Oct 2015 19:00:01 +0000 (00:30 +0530)]
Staging: wilc1000: wilc_wfi_cfgoperations: Remove irrelevant wrapper function
Remove the wrapper function WILC_WFI_add_wilcvendorspec() and replace
its call with memcpy().
Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shivani Bhardwaj [Tue, 27 Oct 2015 17:28:06 +0000 (22:58 +0530)]
Staging: wilc1000: coreconfigurator: Remove trailing whitespace
In block comments, trailing whitespaces should be removed.
Fix checkpatch ERROR: trailing whitespace
Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:36 +0000 (15:59 +0900)]
staging: wilc1000: rename u8RemainOnChan_pendingreq of struct host_if_drv
This patch renames u8RemainOnChan_pendingreq of struct host_if_drv to
remain_on_ch_pending to avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:35 +0000 (15:59 +0900)]
staging: wilc1000: rename strHostIfRemainOnChan of struct host_if_drv
This patch renames strHostIfRemainOnChan of struct host_if_drv to remain_on_ch
to avoid CamelCase naming convention.
And, remove the relation comment.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:34 +0000 (15:59 +0900)]
staging: wilc1000: rename strWILC_UsrConnReq of struct host_if_drv
This patch renames strWILC_UsrConnReq of struct host_if_drv to usr_conn_req
to avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:33 +0000 (15:59 +0900)]
staging: wilc1000: rename strWILC_UsrScanReq of struct host_if_drv
This patch renames strWILC_UsrScanReq of struct host_if_drv to usr_scan_req
to avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:32 +0000 (15:59 +0900)]
staging: wilc1000: rename u8MacAddress of struct get_mac_addr
This patch renames u8MacAddress of struct get_mac_addr to mac_addr
to avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:31 +0000 (15:59 +0900)]
staging: wilc1000: rename u8MacAddress of struct set_mac_addr
This patch renames u8MacAddress of struct set_mac_addr to mac_addr
to avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:30 +0000 (15:59 +0900)]
staging: wilc1000: rename u32Mode of struct op_mode
This patch renames u32Mode of struct op_mode to mode
to avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:29 +0000 (15:59 +0900)]
staging: wilc1000: rename u32Address of struct drv_handler
This patch renames u32Address of struct drv_handler to handler
to avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:28 +0000 (15:59 +0900)]
staging: wilc1000: rename variable strWID
This patch renames variable strWID to wid
to avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:27 +0000 (15:59 +0900)]
staging: wilc1000: rename au8StartTime of struct join_bss_param
This patch renames au8StartTime of struct join_bss_param to start_time
to avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:26 +0000 (15:59 +0900)]
staging: wilc1000: host_interface: removes unused functions
This patch removes unused functions at host_interface files.
- host_int_send_join_leave_info_to_host
- host_int_send_network_info_to_host
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:25 +0000 (15:59 +0900)]
staging: wilc1000: fixes please don't use multiple blank lines
This patch fixes the checks reported by checkpatch.pl
for Please don't use multiple blank lines.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:24 +0000 (15:59 +0900)]
staging: wilc1000: fixes missing a blank line after declarations
This patch fixes the warnings reported by checkpatch.pl
for Missing a blank line after declarations.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:23 +0000 (15:59 +0900)]
staging: wilc1000: fixes blank lines aren't necessary brace
This patch fixes the checks reported by checkpatch.pl
for Blank lines aren't necessary after an open brace '{' and
Blank lines aren't necessary before a close brace '}'.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:22 +0000 (15:59 +0900)]
staging: wilc1000: fixes braces {} are not necessary for single statement blocks
This patch fixes the warnings reported by checkpatch.pl
for braces {} are not necessary for single statement blocks
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:59:21 +0000 (15:59 +0900)]
staging: wilc1000: remove unnecessary parentheses around
This patch removes the checks reported by checkpatch.pl
for unnecessary parentheses around.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Wed, 28 Oct 2015 08:43:27 +0000 (17:43 +0900)]
staging: wilc1000: change MAINTAINERS
This patch removes Rachel Kim from the MAINTAINERS list because she
retires from her position and adds Austin shin as new MAINTAINER for
the Atmel wireless link controller: WILC1000 and WILC3000.
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Wed, 28 Oct 2015 06:27:21 +0000 (15:27 +0900)]
staging: wilc1000: wilc_msgqueue.c : remove goto statement
This patch removes goto statement and moves the spin lock position.
If a memory allocation fails, directly returns an error.
The spin lock actually protects the pHandle. Therefore, call spin lock just
before pHandle is used.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:28:03 +0000 (18:28 +0900)]
staging: wilc1000: tcp_process: add argument dev and use private data
This patch adds new argument net_device and use netdev private data member
wilc instead of g_linux_wlan. Pass argument dev to the function as well.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:28:02 +0000 (18:28 +0900)]
staging: wilc1000: wilc_wlan_txq_add_net_pkt: add argument struct net_device
This patch add new argument struct net_device *dev and pass net_device to
wilc_wlan_txq_add_net_pkt.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:28:01 +0000 (18:28 +0900)]
staging: wilc1000: mac_xmit: use netdev private wilc instead of g_linux_wlan
This patch uses netdev private data member wilc instead of g_linux_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:28:00 +0000 (18:28 +0900)]
staging: wilc1000: wilc_wlan_txq_get_next: add argument wilc
This patch adds new argument struct wilc and use wilc instead of g_linux_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:59 +0000 (18:27 +0900)]
staging: wilc1000: wilc_wlan_rxq_add: add argument wilc and use it
This patch adds new argument struct wilc and use it instead of g_linux_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:58 +0000 (18:27 +0900)]
staging: wilc1000: Set_machw_change_vir_if: add argument struct net_device
Add new argument net_device and use netdev private data member wilc
instead of g_linux_wlan. Pass argument dev to the function as well.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:57 +0000 (18:27 +0900)]
staging: wilc1000: GetIfHandler: add argument struct wilc and use it
This patch adds new argument struct wilc and use it instead of
g_linux_wlan. And also pass wilc to the function.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:56 +0000 (18:27 +0900)]
staging: wilc1000: frmw_to_linux: add argument struct wilc
This patch adds new argument struct wilc and use it instead of
g_linux_wlan. Pass argument wilc to the function as well.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:55 +0000 (18:27 +0900)]
staging: wilc1000: wilc_wlan_rxq_remove: add argument wilc and use it
This patch adds new argument struct wilc and use it instead of g_linux_wlan.
Pass wilc to wilc_wlan_rxq_remove.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:54 +0000 (18:27 +0900)]
staging: wilc1000: wilc_wlan_cleanup: add new argument struct net_device
This patch adds new function argument net_device and pass dev to the functions.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:53 +0000 (18:27 +0900)]
staging: wilc1000: mac_ioctl: use private data instead of g_linux_wlan
Use netdev private data member wilc instead of g_linux_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:52 +0000 (18:27 +0900)]
staging: wilc1000: wlan_deinitialize_threads: change argument and use wilc
This patch changes function parameter type struct wilc with struct net_device
and use netdev private data member wilc instead of g_linux_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:51 +0000 (18:27 +0900)]
staging: wilc1000: WILC_WFI_mgmt_rx: add argument wilc and use it
This patch add new argument wilc and use it instead of g_wlan_linux.
Declare the function in wilc_wfi_netdevice.h.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:50 +0000 (18:27 +0900)]
staging: wilc1000: wlan_deinit_locks: change argument wilc with net_device
This patch changes argument wilc with net_device and use netdev private data
member wilc instead of g_linux_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:49 +0000 (18:27 +0900)]
staging: wilc1000: host_int_init: add argument net_device
This patch add argument net_device and pass netdev private data member wilc
to kthread_run. Pass net_device to the function as well.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:48 +0000 (18:27 +0900)]
staging: wilc1000: wilc_wlan_txq_filter_dup_tcp_ack: add argument and use wilc
This patch add argument net_device dev and use netdev private data member wilc
instead of g_linux_wlan. Pass argument dev to the function.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:47 +0000 (18:27 +0900)]
staging: wilc1000: wilc_wlan_handle_txq: add argument and use wilc
This patch adds argument net_device dev and use netdev private data memeber
wilc instead of g_linux_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:46 +0000 (18:27 +0900)]
staging: wilc1000: linux_wlan_txq_task: use wilc instead of g_linux_wlan
Pass argument dev instead of wilc from kthread_run and use netdev private data
member wilc instead of g_linux_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:45 +0000 (18:27 +0900)]
staging: wilc1000: wlan_initialize_threads: change argument with net_device
This patch changes function argument with net_device and use netdev private
data member wilc instead of g_linux_wlan. And there are assignment code with
different value continuously. Take last code.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:44 +0000 (18:27 +0900)]
staging: wilc1000: linux_wlan_set_bssid: use wilc instead of g_linux_wlan
This patch uses netdev private data memeber wilc instead of g_linux_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Tue, 27 Oct 2015 09:27:43 +0000 (18:27 +0900)]
staging: wilc1000: linux_wlan_mac_indicate: add argument and use wilc
This patch adds argument wilc and pass the function wilc. Use wilc instead of
g_linux_wlan and pd.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.043999 seconds and 5 git commands to generate.