Chris Wilson [Sat, 20 Jul 2013 19:27:08 +0000 (20:27 +0100)]
drm/i915: Add some debug breadcrumbs to connector detection
Try to decypher detection failures is a little tricker at the moment as
the only indicator of progress is when output_poll_execute() tells us
the result after the connector->detect() has run. This patch adds a
telltale to the start of each detect function so that we can track
progress and associate activity more clearly with each connector.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 19 Jul 2013 21:57:55 +0000 (18:57 -0300)]
drm/i915: invert {ilk, snb}_gt_irq_handler check
Requested by Chris Wilson on IRC.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 19 Jul 2013 16:16:42 +0000 (09:16 -0700)]
drm/i915: Make i915 events part of uapi
Make the uevent strings part of the user API for people who wish to
write their own listeners.
v2: Make a space in the string concatenation. (Chad)
Use the "UEVENT" suffix intead of "EVENT" (Chad)
Make kernel-doc parseable Docbook comments (Daniel)
v3: Undid reset change introduced in last submission (Daniel)
Fixed up comments to address removal changes.
Thanks to Daniel Vetter for a majority of the parity error comments.
CC: Chad Versace <chad.versace@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 23:01:56 +0000 (20:01 -0300)]
drm/i915: kill ivybridge_irq_postinstall
It was very similar to ironlake_irq_postinstall, so IMHO merging both
functions results in a code that is easier to maintain.
With this change, all the irq handler vfuncs between ironlake and
ivybridge are now unified.
v2: Add "(" and ")" to make at least one vim user much happier (Chris)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 23:00:08 +0000 (20:00 -0300)]
drm/i915: kill Ivybridge vblank irq vfuncs
The IVB funtions are exactly the same as the ILK ones, with the
exception of the bit register. So add IVB/HSW support to
ironlake_enable_vblank and ironlake_disable_vblank, then kill the
ivybridge functions.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 22:56:30 +0000 (19:56 -0300)]
drm/i915: add ILK/SNB support to ivybridge_irq_handler
And then rename it to ironlake_irq_handler. Also move
ilk_gt_irq_handler up to avoid forward declarations.
In the previous patches I did small modifications to both
ironlake_irq_handler an ivybridge_irq_handler so they became very
similar functions. Now it should be very easy to verify that all we
need to add ILK/SNB support is to call ilk_gt_irq_handler, call
ilk_display_irq_handler and avoid reading pm_iir on gen 5.
v2: - Rebase due to changes on the previous patches
- Move pm_iir to a tighter scope (Chris)
- Change some Gen checks for readability
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 19:35:14 +0000 (16:35 -0300)]
drm/i915: POSTING_READ(DEIER) on ivybridge_irq_handler
We have this POSTING_READ inside ironlake_irq_handler. I suppose we
also want it on IVB because we want to stop the IRQ handler as soon as
possible at this point.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 22:54:41 +0000 (19:54 -0300)]
drm/i915: reorganize ironlake_irq_handler
The ironlake_irq_handler and ivybridge_irq_handler functions do
basically the same thing, but they have different implementation
styles. With this patch we reorganize ironlake_irq_handler in a way
that makes it look very similar to ivybridge_irq_handler.
One of the advantages of this new function style is that we don't
write 0 to the IIR registers anymore.
v2: - Rebase due to changes on previous patches
- Move pm_iir to a tighter scope (Chris)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 22:52:36 +0000 (19:52 -0300)]
drm/i915: don't read or write GEN6_PMIIR on Gen 5
The register doesn't exist on Gen 5.
v2: Simplify checks since pm_iir is always 0 on Gen 5 (Chris)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 19:35:11 +0000 (16:35 -0300)]
drm/i915: extract ivb_display_irq_handler
Just like we did with ilk_display_irq_handler.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 19:35:10 +0000 (16:35 -0300)]
drm/i915: extract ilk_display_irq_handler
It's the code that deals with de_iir.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 19:35:09 +0000 (16:35 -0300)]
drm/i915: kill ivybridge_irq_preinstall
After Daniel's latest changes it's now equal to
ironlake_irq_preinstall.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Xiong Zhang [Fri, 19 Jul 2013 05:51:24 +0000 (13:51 +0800)]
drm/i915: add prefault_disable module option
prefault is stll enabled by default which prevent most of pwrite/pread/reloc
from running slow path, in order to verify these slow pathes, prefault need
to be disabled.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
[danvet: Make checkpatch happy and bikeshed the module option help
text a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dan Carpenter [Fri, 19 Jul 2013 05:46:27 +0000 (08:46 +0300)]
drm/i915: use after free on error path
i915_gem_vma_destroy() frees its argument so we have to move the
drm_mm_remove_node() call up a few lines.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dan Carpenter [Fri, 19 Jul 2013 05:45:46 +0000 (08:45 +0300)]
drm/i915: checking for NULL instead of IS_ERR()
i915_gem_vma_create() returns and ERR_PTR() or a valid pointer, it never
returns NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 17:19:38 +0000 (14:19 -0300)]
drm/i915: extract lpt_enable_clkout_dp from lpt_init_pch_refclk
The next step is to modify lpt_enable_clkout_dp to enable support for
"Sequence to enable CLKOUT_DP" and "Sequence to enable CLKOUT_DP
without spread".
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 18 Jul 2013 21:51:11 +0000 (18:51 -0300)]
drm/i915: extract FDI mPHY functions from lpt_init_pch_refclk
Because lpt_init_pch_refclk implements the "Sequence to enable
CLKOUT_DP for FDI usage and configure PCH FDI I/O", which is very
similar to "Sequence to enable CLKOUT_DP" and "Sequence to enable
CLKOUT_DP without spread". With the extracted functions we can more
easily implement the two missing sequences.
v2: Rebase (WaMPhyProgramming:hsw comment).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 12 Jul 2013 17:19:36 +0000 (14:19 -0300)]
drm/i915: remove SDV support from lpt_pch_init_refclk
The machines that fall in the "is_sdv" case are some very early
pre-production steppings. This patch may break VGA output after
suspend/resume on these machines.
Even the documentation for the is_sdv cases was removed from BSpec.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Thu, 18 Jul 2013 14:44:13 +0000 (17:44 +0300)]
drm/i915: restore debug message lost in merge resolution
Restore debug message lost in merge commit
e1b73cba13. Also clarify it
that we are only clamping bpp not overwriting it.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 11 Jul 2013 21:45:05 +0000 (18:45 -0300)]
drm/i915: Hook PSR functionality
PSR must be enabled after transcoder and port are running.
And it is only available for HSW.
v2: move enable/disable to intel_ddi
v3: The spec suggests PSR should be disabled even before backlight (by pzanoni)
v4: also disabling and enabling whenever panel is disabled/enabled.
v5: make it last patch to avoid breaking whenever bisecting. So calling for
update and force exit came to this patch along with enable/disable calls.
v6: Remove unused and unecessary psr_enable/disable calls, as notice by Paulo.
CC: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Drop the psr exit code in the busy ioctl since I didn't merge
that part of the infrastructure yet - it needs more thought.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 11 Jul 2013 21:45:01 +0000 (18:45 -0300)]
drm/i915: add update function to disable/enable-back PSR
Required function to disable PSR when going to console mode.
But also can be used whenever PSR mode entry conditions changed.
v2: Add it before PSR Hook. Update function not really been called yet.
v3: Fix coding style detected by checkpatch by Paulo Zanoni.
v4: do_enable must be static as Paulo noticed.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 11 Jul 2013 21:45:02 +0000 (18:45 -0300)]
drm/intel: add enable_psr module option and disable psr by default
v2: prefer seq_puts to seq_printf detected by Paulo Zanoni.
v3: PSR is disabled by default. Without userspace ready it
will cause regression for kde and xdm users
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 11 Jul 2013 21:45:00 +0000 (18:45 -0300)]
drm/i915: Match all PSR mode entry conditions before enabling it.
v2: Prefer seq_puts to seq_printf by Paulo Zanoni.
v3: small changes like avoiding calling dp_to_dig_port twice as noticed by
Paulo Zanoni.
v4: Avoiding reading non-existent registers - noticed by Paulo
on first psr debugfs patch.
v5: Accepting more suggestions from Paulo:
* check sw interlace flag instead of i915_read
* introduce PSR_S3D_ENABLED to avoid forgeting it whenever added.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com>
[danvet: Fix up debugfs output (spotted by Paulo) and rip out the
power well check since we really can't do that in a race-free manner,
so it's bogus.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 11 Jul 2013 21:44:59 +0000 (18:44 -0300)]
drm/i915: Added debugfs support for PSR Status
Adding support for PSR Status, PSR entry counter and performance counters.
Heavily based on initial work from Shobhit.
v2: Fix PSR Status Link bits by Paulo Zanoni.
v3: Prefer seq_puts to seq_printf by Paulo Zanoni.
v4: Fix identation by Paulo Zanoni.
v5: Return earlier if it isn't Haswell in order to avoid reading non-existing
registers - by Paulo Zanoni.
CC: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Credits-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 11 Jul 2013 21:44:58 +0000 (18:44 -0300)]
drm/i915: Enable/Disable PSR
Adding Enable and Disable PSR functionalities. This includes setting the
PSR configuration over AUX, sending SDP VSC DIP over the eDP PIPE config,
enabling PSR in the sink via DPCD register and finally enabling PSR on
the host.
This patch is based on initial PSR code by Sateesh Kavuri and Kumar Shobhit
but in a different implementation.
v2: * moved functions around and changed its names.
* removed VSC DIP unset from disable.
* remove FBC wa.
* don't mask LSPS anymore.
* incorporate new crtc usage after a rebase.
v3: Make a clear separation between Sink (Panel) and Source (HW) enabling.
v4: Fix identation and other style issues raised by checkpatch (by Paulo).
v5: Changes according to Paulo's review:
static on write_vsc;
avoid using dp_to_dev when already calling dp_to_dig_port;
remove unecessary TP default time setting;
remove unecessary interrupts disabling;
remove unecessary wait_for_vblank when disabling psr;
v6: remove unecessary wait_for_vblank when writing vsc;
v7: adding setup once function to avoid unnecessarily write to vsc
and set debug_ctl every time we enable or disable psr.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Credits-by: Sateesh Kavuri <sateesh.kavuri@intel.com>
Credits-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com>
[danvet: Apply Paulo's suggestion for unconditionally clearing the
control register when writing the DIP.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 11 Jul 2013 21:44:57 +0000 (18:44 -0300)]
drm/i915: split aux_clock_divider logic in a separated function for reuse.
Prep patch for reuse aux_clock_divider with EDP_PSR_AUX_CTL setup.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shobhit Kumar [Thu, 11 Jul 2013 21:44:56 +0000 (18:44 -0300)]
drm/i915: Read the EDP DPCD and PSR Capability
v2: reuse of just created is_edp_psr and put it at right place.
v3: move is_edp_psr above intel_edp_disable
v4: remove parentheses. Noticed by Paulo.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shobhit Kumar [Thu, 11 Jul 2013 21:44:55 +0000 (18:44 -0300)]
drm: Added SDP and VSC structures for handling PSR for eDP
SDP header and SDP VSC header as per eDP 1.3 spec, section 3.5,
chapter "PSR Secondary Data Package Support".
v2: Modified and corrected the structures to be more in line for
kernel coding guidelines and rebased the code on Paulo's DP patchset
v3: removing unecessary identation at DP_RECEIVER_CAP_SIZE
v4: moving them to include/drm/drm_dp_helper.h and also already
icluding EDP_PSR_RECEIVER_CAP_SIZE to add everything needed
for PSR at once at drm_dp_helper.h
v5: Fix SDP VSC header and identation by (Paulo Zanoni) and
remove i915 from title (Daniel Vetter)
v6: Fix spec version and move comments from code to commit message
since numbers might change in the future (by Paulo Zanoni).
CC: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Sateesh Kavuri <sateesh.kavuri@intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 17 Jul 2013 19:19:03 +0000 (12:19 -0700)]
drm/i915: Create VMAs
Formerly: "drm/i915: Create VMAs (part 1)"
In a previous patch, the notion of a VM was introduced. A VMA describes
an area of part of the VM address space. A VMA is similar to the concept
in the linux mm. However, instead of representing regular memory, a VMA
is backed by a GEM BO. There may be many VMAs for a given object, one
for each VM the object is to be used in. This may occur through flink,
dma-buf, or a number of other transient states.
Currently the code depends on only 1 VMA per object, for the global GTT
(and aliasing PPGTT). The following patches will address this and make
the rest of the infrastructure more suited
v2: s/i915_obj/i915_gem_obj (Chris)
v3: Only move an object to the now global unbound list if there are no
more VMAs for the object which are bound into a VM (ie. the list is
empty).
v4: killed obj->gtt_space
some reworks due to rebase
v5: Free vma on error path (Imre)
v6: Another missed vma free in i915_gem_object_bind_to_gtt error path
(Imre)
Fixed vma freeing in stolen preallocation (Imre)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Squash in fixup from Ben to not deref a non-existing vma in
set_cache_level, reported by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 17 Jul 2013 19:19:02 +0000 (12:19 -0700)]
drm/i915: Free stolen node on failed preallocation
The odds of this happening are *extremely* unlikely.
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 16 Jul 2013 23:50:08 +0000 (16:50 -0700)]
drm/i915: Move active/inactive lists to new mm
Shamelessly manipulated out of Daniel :-)
"When moving the lists around explain that the active/inactive stuff is
used by eviction when we run out of address space, so needs to be
per-vma and per-address space. Bound/unbound otoh is used by the
shrinker which only cares about the amount of memory used and not one
bit about in which address space this memory is all used in. Of course
to actual kick out an object we need to unbind it from every address
space, but for that we have the per-object list of vmas."
v2: Leave the bound list as a global one. (Chris, indirectly)
v3: Rebased with no i915_gtt_vm. In most places I added a new *vm local,
since it will eventually be replaces by a vm argument.
Put comment back inline, since it no longer makes sense to do otherwise.
v4: Rebased on hangcheck/error state movement
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 16 Jul 2013 23:50:07 +0000 (16:50 -0700)]
drm/i915: Create a global list of vms
After we plumb our code to support multiple address spaces (VMs), there
are a few situations where we want to be able to traverse the list of
all address spaces in the system. Cases like eviction, or error state
collection are obvious example.
v2: Delete the global link instead of the list head. While this in and
of itself shouldn't be really be a problem, doing this allows us to WARN
on an non-empty list, which is a problem. (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 16 Jul 2013 23:50:06 +0000 (16:50 -0700)]
drm/i915: Put the mm in the parent address space
Every address space should support object allocation. It therefore makes
sense to have the allocator be part of the "superclass" which GGTT and
PPGTT will derive.
Since our maximum address space size is only 2GB we're not yet able to
avoid doing allocation/eviction; but we'd hope one day this becomes
almost irrelvant.
v2: Rebased
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 16 Jul 2013 23:50:05 +0000 (16:50 -0700)]
drm/i915: Move gtt and ppgtt under address space umbrella
The GTT and PPGTT can be thought of more generally as GPU address
spaces. Many of their actions (insert entries), state (LRU lists), and
many of their characteristics (size) can be shared. Do that.
The change itself doesn't actually impact most of the VMA/VM rework
coming up, it just fits in with the grand scheme of abstracting the GPU
VM operations. GGTT will usually be a special case where we either know
an object must be in the GGTT (dislay engine, workarounds, etc.).
The scratch page is left as part of the VM (even though it's currently
shared with the ppgtt code) because in the future when we have Full
PPGTT, I intend to create a separate scratch page for each.
v2: Drop usage of i915_gtt_vm (Daniel)
Make cleanup also part of the parent class (Ben)
Modified commit msg
Rebased
v3: Properly share scratch page (Imre)
Finish commit message (Daniel, Imre)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Wed, 3 Jul 2013 14:22:08 +0000 (17:22 +0300)]
drm/i915: introduce i915_queue_hangcheck
To run hangcheck in near future.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 3 Jul 2013 14:22:07 +0000 (17:22 +0300)]
drm/i915: Replace open-coding of DEFAULT_CONTEXT_ID
The intent of the check is made more clear if we use the proper name for
0 here.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 3 Jul 2013 14:22:06 +0000 (17:22 +0300)]
drm/i915: Fix retrieval of hangcheck stats
The default context is always supported (as it contains the global
hangcheck stats) and the contexts for hangcheck are not limited
to any ring.
References: https://bugs.freedesktop.org/show_bug.cgi?id=65845
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 7 Jun 2013 16:41:14 +0000 (17:41 +0100)]
drm/i915: Don't try to calculate RC6 residency on GEN4 and before
intel_enable_rc6() is used to check if we can compute the RC6 residency
in the sysfs code. Disable this for platforms older than Ironlake.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 7 Jun 2013 16:41:10 +0000 (17:41 +0100)]
drm/i915: We implement WaMPhyProgramming on Haswell
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 7 Jun 2013 16:41:09 +0000 (17:41 +0100)]
drm/i915: We implement WaFbcDisableDpfcClockGating on ilk
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 14 Jun 2013 14:23:24 +0000 (15:23 +0100)]
drm/i915: We implement WaFbcAsynchFlipDisableFbcQueue on ilk and snb
v2: Put the comment a bit closer to the actual write (Paulo Zanoni)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Fix space before tab.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 7 Jun 2013 16:41:07 +0000 (17:41 +0100)]
drm/i915: We implement WaFbcWaitForVBlankBeforeEnable for ilk and snb
We also wait for that blank on other platforms but the w/a doesn't
apply there. Not an issue at all.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 21:35:34 +0000 (23:35 +0200)]
drm/i915: simplify rps interrupt enabling/disabling sequence
At the moment we have the following interrupt enabling sequence:
1. irq preinstall hook
2. enabling the interrupt handler and calling irq postinstall hook
3. enable rps interrupts from the async work
And the folliwing disable sequence:
1. disabling the interrupt handler and calling the uninstall hook
2. disabling the rps interrupt
Since the postinstall hook now always sets up PMIIR, PMIER and PMIMR
to known-good states there no way for an interrupt to sneak in in the
enable sequence, so we can reinstate the WARN lost in
commit
eda63ffb906c2fb3b609a0e87aeb63c0f25b9e6b
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Tue May 28 19:22:26 2013 -0700
drm/i915: Add PM regs to pre/post install
Note that there's some room for future cleanups since most of the
interrupt register clearing in the disable function is rather
redundant. But that's better done in follow-up patches, if at all.
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 12 Jul 2013 20:43:27 +0000 (22:43 +0200)]
drm/i915: extract rps interrupt enable/disable helpers
The VECS enabling required some changes to how rps interrupts are
enabled/disabled since VECS interrupts are handling with the PM
interrupt registers.
But now that the pre/postinstall sequences is identical for all
platforms with rps support (snb, ivb, hsw, vlv) we can also use the
exact same sequence to actually enable the rps interrupts. Strictly
speaking using spinlocks is overkill on snb/ivb & vlv since they have
no VECS ring, but imo that's more than made up by the common code.
Hence this just unifies the vlv code with the snb-hsw code which
matched exactly before the VECS enabling. See
commit
eda63ffb906c2fb3b609a0e87aeb63c0f25b9e6b
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Tue May 28 19:22:26 2013 -0700
drm/i915: Add PM regs to pre/post install
and
commit
4848405cced3b46f4ec7d404b8ed5873171ae10a
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Tue May 28 19:22:27 2013 -0700
drm/i915: make PM interrupt writes non-destructive
for why the gen6 code (shared between snb, ivb and hsw) needed to be
changed originally.
v3: Improve the commit message to more clearly spell out why we want
to unify the code and what exactly changes.
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 12 Jul 2013 20:43:26 +0000 (22:43 +0200)]
drm/i915: unify GT/PM irq postinstall code
Again extract a common helper. For the postinstall hook things are a
bit more complicated since we have more cases on ilk-hsw/vlv here.
But since vlv was clearly broken by failing to initialize
dev_priv->gt_irq_mask correctly the shared code is clearly justified.
Also kill the PMIER setting in the async rps enable work. I should
have been save, but also clearly looked rather fragile. PMIER setup is
now all down in the irq pre/postinstall hooks.
With this we now have the usual interrupt register sequence for GT/PM
irq registers:
- IER is setup once with all the interrupts we ever need in the
postinstall hook and never touched again. Exceptions are SDEIER,
which is touched in the preinstall hook (when the irq handler isn't
enabled) and then only from the irq handler. And DEIER/VLV_IER with
is used in the irq handler but also written to once in the
postinstall hook. But since that write is essentially what enables
the interrupt and we should always have MSI interrupts we should be
save. In case we ever have non-MSI interrupts we'd be screwed.
- IIR is cleared in the postinstall hook before we enable/unmask the
respective interrupt sources. Hence we can't steal an interrupt
event an accidentally trigger the spurious interrupt logic in the
core kernel. Note that after some discussion with Ben Widawsky we
think that we actually should clear the IIR registers in the
preinstall hook. But doing that is a much larger patch series.
- IMR regs are (usually) all masked off. Those are the only regs
changed at runtime, which is all protected by dev_priv->irq_lock.
This unification also kills the cargo-culted read-modify-write PM
register setup for VECS. Interrupt setup is done without userspace
being able to interfere, so we better know what values we want to put
into those registers. RMW cycles otoh are really good at papering over
races, until stuff magically blows up and no one has a clue why.
v2: Touch the gen6+ PM interrupt registers only on gen6+.
v3: Improve the commit message to more clearly spell out why we want
to unify the code and what exactly changes.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Add a comment to explain why the l3 parity interrupt is
special.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 12 Jul 2013 20:43:25 +0000 (22:43 +0200)]
drm/i915: unify PM interrupt preinstall sequence
Since the addition of VECS we have a slightly different enable
sequence for PM interrupts on ivb/hsw vs snb and vlv. Usually that
will end up in hard to track down surprises.
Hence unifiy things and since we have copies of this code in 3 places
now, extract it into its own little helper.
Note that this changes the irq preinstall sequence a bit for snb and
vlv: We now also clear the PM registers in the preinstall hook, in
addition to the PM register clearing/setup already done when actually
enabling rps. So this doesn't fix a bug but simply unifies the code
across all platforms. After the postinstall hook is similarly unified
we can rip out the then redundant PM interrupt setup from the rps
code.
v3: Rebase on top of the retained double-GTIIR clearing. Also
resurrect the masking/disabling of the gen6+ PM interrupts as spotted
by Ben Widaswky.
v4: Move the DE interrupt reset code out of gen5_gt_irq_preinstall
back to ironlake_irq_preinstall where it really belongs. Spotted by
Paulo.
v3: Improve the commit message to more clearly spell out why we want
to unify the code and what exactly changes.
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: s/GT/PM/ to fix up a comment which Ben spotted while
reviewing.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 4 Jul 2013 18:02:07 +0000 (11:02 -0700)]
drm/i915: debugfs entries for [e]LLC
To make users life a little easier figuring out what they have on their
system.
Ideally, I'd really like to report LLC size, but it turned out to be a
bit of a pain. Maybe I'll revisit it in the future.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 4 Jul 2013 18:02:06 +0000 (11:02 -0700)]
drm/i915: Use eLLC/LLC by default when available
DRI clients really should be using MOCS to get fine grained streaming
cache controls. With that note, I *hope* that this patch doesn't improve
performance overwhelmingly, because if it does - it means there is a
problem elsewhere.
In any case, the kernel, and old userspace should get some benefit from
this, so let's do it. eLLC is always a good default, and really not
using it is the special case for MOCS.
References: http://www.intel.com/newsroom/kits/restricted/ha$well!/pdfs/4th_Gen_Intel_Core_PressBriefing_5-29.pdf (page 57)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 4 Jul 2013 18:02:05 +0000 (11:02 -0700)]
drm/i915: store eLLC size
The eLLC cannot be determined by PCIID because as far as we know, even
machines supporting eLLC may not have it enabled, or fused off or
whatever. It's possible this isn't actually true, and at that point we
can switch to a DEV_INFO flag instead.
I've defined everything where the docs are clear, and left the rest as
magic.
But we need it before we set the pte_encode function pointers, which
happens really early, in gtt_init.
The problem with just doing the normal sequence earlier is we don't have
the ability to use forcewake until after the pte functions have been set
up.
Since all solutions are somewhat ugly (barring rewriting all the init
ordering), I've opted to do the detection really early, and the enabling
later - since the register to detect doesn't require forcewake.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Move dev_priv->ellc_size away from the dri1 dungeon to a nice
place right next to the l3 parity stuff. Also squash in the follow-up
commit to read out the eLLC size a bit earlier.]
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 4 Jul 2013 18:02:04 +0000 (11:02 -0700)]
drm/i915: Define some of the eLLC magic
The EDRAM present register isn't really defined in the docs. It just
says check to see if it's set to 1. So I haven't defined the 1 value not
knowing what it actually means.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 4 Jul 2013 18:02:03 +0000 (11:02 -0700)]
drm/i915/hsw: Set correct Haswell PTE encodings.
The cacheability controls have changed, and the bits have been
rearranged in general.
Note that age 0 is the oldest (most likely to get evicted) and age 3
is the youngest (most likely to stick around for a bit). We've picked
0 for no reason, but atm it shouldn't matter anyway (since we don't
yet try to differentiate between different objects).
v2: Remove comments for snb/ivb cache leves, that's a separate change.
v3: Resolve conflicts due to patch series reordering.
v4: Rebased on top of Kenneth Graunke's ->pte_encode refactoring.
v5: Removed eLLC bits for separate patch.
In the internal repository this was:
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Add comment about cache ages as requested by Ben provoked due
to a question from Damien.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 5 Jun 2013 11:34:33 +0000 (13:34 +0200)]
drm/i915: clear DPLL reg when disabling i9xx dplls
Toghether with the hw state readout this should catch cases where we
don't properly updated the pll state (either in sw or hw). At least
for the shared dpll code the equivalent tricke helped a lot in
catching bugs.
Also rename the function prefix, it's not a generic piece of
infrastructure.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 5 Jun 2013 11:34:32 +0000 (13:34 +0200)]
drm/i915: Fix up cpt pixel multiplier enable sequence
Bspec for the "DPLL HDMI multiplier" field says:
"Restriction : The DPLL must be enabled and stable before setting these bits.
These bits must be programmed after DPLL_SEL is programmed."
There is apparently no restriction on programming the DPLL_SEL
register wrt the DPLL. So let's just move that up before we enable the
pch dpll.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 11 Jul 2013 20:13:42 +0000 (22:13 +0200)]
drm/i915: clean up vlv ->pre_pll_enable and pll enable sequence
No need to call the ->pre_pll_enable hook twice if we don't enable the
dpll too early. This should make Jani a bit less grumpy.
v2: Rebase on top of the newly-colored BUG_ONs.
v3: Reinstate the lost write of the DPLL_MD register, spotted by Imre.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Fri, 12 Jul 2013 13:50:57 +0000 (16:50 +0300)]
drm/i915: move error state to own compilation unit
Move error state generation and stringification to it's
own compilation unit. Sysfs also uses this so it can't be
under CONFIG_DEBUG_FS
This fixes a regression introduced in
commit
ef86ddced720fddc3835558447a7f594d3609c73
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Thu Jun 6 17:38:54 2013 +0300
drm/i915: add error_state sysfs entry
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66814
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 12 Jul 2013 15:24:40 +0000 (16:24 +0100)]
drm/i915: Don't attempt to read an unitialized stack value
If intel_sdvo_get_value() fails here, val is unitialized and the cross
check will compare the pipe config multiplier with a bogus value.
Instead, only set encoder_pixel_multiplier when the sdvo command has
been successful. The cross check will compare the pipe config value with
0 otherwise.
v2: Do the cross check with the initial value of encoder_pixel_multiplier (0)
if the sdvo command fails (and thus keep the warning) (Daniel Vetter)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Thu, 11 Jul 2013 19:10:54 +0000 (20:10 +0100)]
drm/i915: Use for_each_pipe() when possible
Came accross two open coding of for_each_pipe(), might as well use the
macro.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 21:35:30 +0000 (23:35 +0200)]
drm/i915: don't enable PM_VEBOX_CS_ERROR_INTERRUPT
The code to handle it is broken - there's simply no code to clear CS
parser errors on gen5+. And behold, for all the other rings we also
don't enable it!
Leave the handling code itself in place just to be consistent with the
existing mess though. And in case someone feels like fixing it all up.
This has been errornously enabled in
commit
12638c57f31952127c734c26315e1348fa1334c2
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Tue May 28 19:22:31 2013 -0700
drm/i915: Enable vebox interrupts
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 21:35:29 +0000 (23:35 +0200)]
drm/i915: unify ring irq refcounts (again)
With the simplified locking there's no reason any more to keep the
refcounts seperate.
v2: Readd the lost comment that ring->irq_refcount is protected by
dev_priv->irq_lock.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 21:35:28 +0000 (23:35 +0200)]
drm/i915: kill dev_priv->rps.lock
Now that the rps interrupt locking isn't clearly separated (at elast
conceptually) from all the other interrupt locking having a different
lock stopped making sense: It protects much more than just the rps
workqueue it started out with. But with the addition of VECS the
separation started to blurr and resulted in some more complex locking
for the ring interrupt refcount.
With this we can (again) unifiy the ringbuffer irq refcounts without
causing a massive confusion, but that's for the next patch.
v2: Explain better why the rps.lock once made sense and why no longer,
requested by Ben.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 21:35:27 +0000 (23:35 +0200)]
drm/i915: queue work outside spinlock in hsw_pm_irq_handler
And kill the comment about it. Queueing work is a barrier type event,
no amount of locking will help in ordering things (as long as we queue
the work after having updated all relevant data structures). Also, the
queue_work works itself as a sufficient memory barrier.
Again on the surface this is just a tiny micro-optimization to reduce
the hold-time of dev_priv->irq_lock. But the better reason is that it
reduces superficial locking and so makes it clearer what we actually
need for correctness.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 21:35:26 +0000 (23:35 +0200)]
drm/i915: streamline hsw_pm_irq_handler
The if (pm_iir & ~GEN6_PM_RPS_EVENTS) check was redunandant. Otoh
adding a check for rps events allows us to avoid the spinlock grabbing
for VECS interrupts.
v2: Drop misplaced hunk which now moved to the right patch.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 21:35:25 +0000 (23:35 +0200)]
drm/i915: irq handlers don't need interrupt-safe spinlocks
Since we only have one interrupt handler and interrupt handlers are
non-reentrant.
To drive the point really home give them all an _irq_handler suffix.
This is a tiny micro-optimization but even more important it makes it
clearer what locking we actually need. And in case someone screws this
up: lockdep will catch hardirq vs. other context deadlocks.
v2: Fix up compile fail.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 21:35:24 +0000 (23:35 +0200)]
drm/i915: kill lpt pch transcoder->crtc mapping code for fifo underruns
It's racy: There's no guarantee that we won't walk this code (due to a
pch fifo underrun interrupt) while someone is changing the pointers
around.
The only reason we do this is to use the righ crtc for the pch fifo
underrun accounting. But we never expose this to userspace, so
essentially no one really cares if we use the "wrong" crtc.
So let's just rip it out.
With this patch fifo underrun code will always use crtc A for tracking
underruns on the (only) pch transcoder on LPT.
v2: Add a big comment explaining what's going on. Requested by Paulo.
v3: Fixup spelling in comment as spotted by Paulo.
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 9 Jul 2013 20:59:16 +0000 (22:59 +0200)]
drm/i915: improve GEN7_ERR_INT clearing for fifo underrun reporting
Same treatment as for SERR_INT: If we clear only the bit for the pipe
we're enabling (but unconditionally) then we can always check for
possible underruns after having disabled the interrupt. That way pipe
underruns won't be lost, but at worst only get reported in a delayed
fashion.
v2: The same logic bug as in the SERR handling change also existed
here. The same bugfix of only reporting missed underruns when the
error interrupt was masked applies, too.
v3: Do the same fixes as for the SERR handling that Paulo suggested in
his review:
- s/%i/%c/ fix in the debug output
- move the DE_ERR_INT_IVB read into the respective if block
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Fix up the checkpatch bikeshed Paulo noticed.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Jul 2013 06:30:23 +0000 (08:30 +0200)]
drm/i915: improve SERR_INT clearing for fifo underrun reporting
The current code won't report any fifo underruns on cpt if just one
pipe has fifo underrun reporting disabled. We can't enable the
interrupts, but we can still check the per-transcoder bits and so
report the underrun delayed if:
- We always clear the transcoder's bit (and none of the other bits)
when enabling.
- We check the transcoder's bit after disabling (to avoid racing with
the interrupt handler).
v2: I've forgotten to actually remove the old SERR_INT clearing.
v3: Use transcoder_name as suggested by Paulo Zanoni. Paulo also
noticed a logic bug: When an underrun interrupt fires we report it
both in the interrupt handler and when checking for underruns when
disabling it in cpt_set_fifo_underrun_reporting. But that second check
is only required if the interrupt is disabled and we're switching of
underrun reporting (e.g. because we're disabling the crtc). Hence
check for that condition.
At first I wanted to rework the code to pass that bit of information
from the uppper functions down to cpt_set_fifo_underrun_reporting. But
that turned out too messy. Hence the quick&dirty check whether the
south error interrupt source is masked off or not.
v4: Streamline the control flow a bit.
v5: s/pipe/pch transcoder/ in the dmesg output, suggested by Paulo.
v6: Review from Paulo:
- Reorder the was_enabled assignment to only read the register when we
need it. Also add a comment that we need to do that before updating
the register.
- s/%i/%c/ fix for the debug output.
- Fix the checkpath complaint in the SERR_INT_TRANS_FIFO_UNDERRUN
#define.
v7: Hopefully put that elusive SERR hunk back into this patch, spotted
by Paulo.
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 21:35:21 +0000 (23:35 +0200)]
drm/i915: extract ibx_display_interrupt_update
This way all changes to SDEIMR all go through the same function, with
the exception of the (single-threaded) setup/teardown code.
For paranoia again add an assert_spin_locked.
v2: For even more paranoia also sprinkle a spinlock assert over
cpt_can_enable_serr_int since we need to have that one there, too.
v3: Fix the logic of interrupt enabling, add enable/disable macros for
the simple cases in the fifo code and add a comment. All requested by
Paulo.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Wed, 10 Jul 2013 12:27:31 +0000 (14:27 +0200)]
drm/i915: remove unused members from drm_i915_private
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 9 Jul 2013 14:51:37 +0000 (16:51 +0200)]
drm/i915: don't frob mm.suspended when not using ums
In kernel modeset driver mode we're in full control of the chip,
always. So there's no need at all to set mm.suspended in
i915_gem_idle. Hence move that out into the leavevt ioctl. Since
i915_gem_idle doesn't suspend gem any more we can also drop the
re-enabling for KMS in the thaw function.
Also clean up the handling of mm.suspend at driver load by coalescing
all the assignments.
Stumbled over while reading through our resume code for unrelated
reasons.
v2: Shovel mm.suspended into the (newly created) ums dungeon as
suggested by Chris Wilson. The plan is that once we've completely
stopped relying on the register save/restore code we could shovel even
that in there.
v3: Improve the locking for the entervt/leavevt ioctls a bit by moving
the dev->struct_mutex locking outside of i915_gem_idle. Also don't
clear dev_priv->ums.mm_suspended for the kms case, we allocate it with
kzalloc. Both suggested by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 5 Jul 2013 16:21:38 +0000 (19:21 +0300)]
drm/i915: Fix VLV DP RBR/HDMI/DAC PLL LPF coefficients
I just got confirmation that we're using some old values for the PLL
LPF coefficients for DP RBR/HDMI/DAC on VLV. The
VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_9 document lists both values
by mistake, and apparently we had picked the wrong one. Change the
coefficients to the recommended values.
Changing the value doesn't appear to destabilize the VGA output picture
even with my sensitive HP ZR24w display. Also HDMI output to my TV still
works fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 9 Jul 2013 12:44:27 +0000 (14:44 +0200)]
drm/i915: WARN if the bios reserved range is bigger than stolen size
v2: Bail out if we hit the WARN_ON to avoid fallout later on. Spotted
by Chris Wilson.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 9 Jul 2013 12:44:26 +0000 (14:44 +0200)]
drm/i915: clean up media reset on gm45
Originally I've thought that this fixes up the reset issues on my
gm45, but that was just a red herring due to b0rked testing.
Still I much prefer writing the right values (all other fields are
reserved) instead of potentially dragging gunk around. Hence also
clear the register to 0 after a reset.
Note that Cspec is a bit confused and doesn't explicitly say that all
the other bits in this register are "reserved, mbz" like usually.
Instead they're marked as "r/o, default value = 0" which semantically
amounts to the same thing.
v2: Stop claiming this fixes anything and return 0 if successful
instead of stack garbage.
v3: Pimp the commit message to explain exactly why I think the docs
allow us to ditch the rmw cycle, spurred by a discussion with Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 4 Jul 2013 11:28:35 +0000 (12:28 +0100)]
drm/i915: Verify that our stolen memory doesn't conflict
Sanity check that the memory region found through the Graphics Base
of Stolen Memory is reserved and hidden from the rest of the system
through the use of the resource API.
v2: "Graphics Stolen Memory" is such a more bodacious name than the lame
"i915 stolen", and convert to using devres for automagical cleanup of
the resource. (danvet)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Dump proper hexcodes.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 18:49:44 +0000 (20:49 +0200)]
drm/i915: convert debugfs creation/destruction to table
At least for the common cases where we only need special file
operations. The forcewake file is still rather more special.
v2: Fix up the debugfs unregister code.
v3: Actually squash in the right fixup.
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Sat, 6 Jul 2013 10:52:06 +0000 (12:52 +0200)]
drm/i915: dvo needs a P2 divisor of 4
Section 1.5.4, "DPLL A Control Register" from Bspec about bit 23
"FPA0/A1 P2 Clock Divide":
0 = Divide by 2
1 = Divide by 4. This bit must be set in DVO non-gang mode
So copy the current limits (which should be good for i8xx) and create
a new set for dvo encoders.
Reviewed-by: Chris Wilson <chris@chris-wilson.oc.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Sat, 6 Jul 2013 10:52:05 +0000 (12:52 +0200)]
drm/i915: fix dvo DPLL regression
I've missed that intel_dvo_mode_set changes the dpll configuration.
Hence when I've reworked the sequence to only enable the dpll in the
crtc_enable callback in
commit
66e3d5c09940d08d94b03e65b420fadaa7484318
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jun 16 21:24:16 2013 +0200
drm/i915: move i9xx dpll enabling into crtc enable function
that special DVO bit was lost. Some BSpec reading confirms that it's
only needed for DVO encoders. Section 1.5.4, "DPLL A Control Register"
for bit 30:
"2X Clock Enable. When driving In non-gang DVO modes such as a
connected flat panel or TV, a 2X" version of the clock is needed. When
not using the 2X output it should be disabled. This bit cannot be set
when driving the integrated LVDS port on devices such as Montara-GM."
Fix this regression up.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66516
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Partially-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 5 Jul 2013 21:41:06 +0000 (14:41 -0700)]
drm/i915: Embed drm_mm_node in i915 gem obj
Embedding the node in the obj is more natural in the transition to VMAs
which will also have embedded nodes. This change also helps transition
away from put_block to remove node.
Though it's quite an uncommon occurrence, it's somewhat convenient to not
fail at bind time because we cannot allocate the node. Though in
practice there are other allocations (like the request structure) which
would probably make this point not terribly useful.
Quoting Daniel:
Note that the only difference between put_block and remove_node is
that the former fills up the preallocation cache. Which we don't need
anyway and hence is just wasted space.
v2: Clean up the stolen preallocation code.
Rebased on the reserve_node patches
renames ggtt_ stuff to gtt_ stuff
WARN_ON if the object is already bound (which doesn't mean it's in the
bound list, tricky)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 5 Jul 2013 21:41:05 +0000 (14:41 -0700)]
drm/i915: Kill obj->gtt_offset
With the getters in place from the previous patch this members serves no
purpose other than saving one spare pointer chase, which will be killed
in the next patch anyway.
Moving to VMAs, this members adds unnecessary confusion since an object
may exist at different offsets in different VMs.
v2: Properly preserve the stolen offset. This code is a bit hacky but it
all goes away when we embed the drm_mm_node and removes the need for the
incorrect patch I submitted previously: "Use gtt_space->start for stolen
reservation"
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 5 Jul 2013 21:41:04 +0000 (14:41 -0700)]
drm/i915: Getter/setter for object attributes
Soon we want to gut a lot of our existing assumptions how many address
spaces an object can live in, and in doing so, embed the drm_mm_node in
the object (and later the VMA).
It's possible in the future we'll want to add more getter/setter
methods, but for now this is enough to enable the VMAs.
v2: Reworked commit message (Ben)
Added comments to the main functions (Ben)
sed -i "s/i915_gem_obj_set_color/i915_gem_obj_ggtt_set_color/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_bound/i915_gem_obj_ggtt_bound/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_size/i915_gem_obj_ggtt_size/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_offset/i915_gem_obj_ggtt_offset/" drivers/gpu/drm/i915/*.[ch]
(Daniel)
v3: Rebased on new reserve_node patch
Changed DRM_DEBUG_KMS to actually work (will need fixing later)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 5 Jul 2013 21:41:03 +0000 (14:41 -0700)]
drm: Change create block to reserve node
With the previous patch we no longer actually create a node, we simply
find the correct hole and occupy it. This very well could have been
squashed with the last patch, but since I already had David's review, I
figured it's easiest to keep it distinct.
Also update the users in i915. Conveniently this is the only user of the
interface.
CC: David Airlie <airlied@linux.ie>
CC: <dri-devel@lists.freedesktop.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 5 Jul 2013 21:41:02 +0000 (14:41 -0700)]
drm: pre allocate node for create_block
For an upcoming patch where we introduce the i915 VMA, it's ideal to
have the drm_mm_node as part of the VMA struct (ie. it's pre-allocated).
Part of the conversion to VMAs is to kill off obj->gtt_space. Doing this
will break a bunch of code, but amongst them are 2 callers of
drm_mm_create_block(), both related to stolen memory.
It also allows us to embed the drm_mm_node into the object currently
which provides a nice transition over to the new code.
v2: Reordered to do before ripping out obj->gtt_offset.
Some minor cleanups made available because of reordering.
v3: s/continue/break on failed stolen node allocation (David)
Set obj->gtt_space on failed node allocation (David)
Only unref stolen (fix double free) on failed create_stolen (David)
Free node, and NULL it in failed create_stolen (David)
Add back accidentally removed newline (David)
CC: <dri-devel@lists.freedesktop.org>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 27 Jun 2013 15:52:10 +0000 (17:52 +0200)]
drm/i915: assert_spin_locked for pipestat interrupt enable/disable
Just to keep the paranoia equal also sprinkle locking asserts over the
pipestat interrupt enable/disable functions.
Again this results in false positives in the interrupt setup. Add
bogo-locking for these and a big comment explaining why it's there and
that it's indeed unnecessary.
v2: Fix up the spelling fail Paulo spotted in comments.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 11:06:28 +0000 (13:06 +0200)]
drm/i915: less magic for stolen preallocated objects w/o gtt offset
A magic -1 is a obscure, especially since it's actually passed as an
unsigned, so depends upon the magic sign extension rules in C. This has
been added in
commit
3727d55e4d85836aa6cb759a965daaef88074150
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed May 8 10:45:14 2013 -0700
drm/i915: allow stolen, pre-allocated objects to avoid GTT allocation v2
Use a proper #define instead. Spotted while reviewing Ben's
drm_mm_create_block changes.
v2: Cast the constant to u32 since otherwise we again have a type
mismatch. Suggested by Chris Wilson.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 10:01:16 +0000 (12:01 +0200)]
drm/i915: Explicitly cast pipe -> intel_dpll_id
We only do this on IBX where there's a fixed pch dpll to pipe
assignment. Being explicit about it can't really hurt and makes
sparse happy.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 4 Jul 2013 10:01:15 +0000 (12:01 +0200)]
drm/i915: explicitly cast pipe -> cpu_transcoder
This makes sparse happy and also makes it a bit more obvious where we
pull off this trick - after all we're only allowed to do it eithe as a
default or on platforms where there is no disdinction between the pipe
and the cpu transcoder.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 26 Jun 2013 14:43:24 +0000 (17:43 +0300)]
drm/i915: Use wait_for() to wait for Punit to change GPU freq on VLV
Use wait_for() instead of the open coded loop to avoid spreading the
same old timeout related bugs.
This changes the loop to use msleep(1) instead of udelay(10) when the
Punit had not yet completed the frequency change. In practice that
doesn't seem to hurt performance as the Punit appears to be ready pretty
much always.
Also give the status bit a name, instead of using the magic number 1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Mon, 1 Jul 2013 22:50:17 +0000 (15:50 -0700)]
drm/i915: split encoder get_config calls from crtc get_clock calls
This should help on HSW, where we don't currently have a get_clock call.
Reported-by: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Mon, 1 Jul 2013 17:19:09 +0000 (10:19 -0700)]
drm/i915: fixup messages in pipe_config_compare
Print out the flag that failed and fix up a mismatched paren.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 6 Jun 2013 14:38:54 +0000 (17:38 +0300)]
drm/i915: add error_state sysfs entry
As getting error state doesn't anymore require big kmallocs,
make error state accessible also from sysfs.
v2: - error state clearing (Chris Wilson)
- user hint, proper access mode bits and name (Daniel Vetter)
v3: release resources in proper order (Chris Wilson)
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Apply Chris' s/error_state/error/ bikeshed on the sysfs
name. Also update the dmesg message, spotted by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 6 Jun 2013 12:18:41 +0000 (15:18 +0300)]
drm/i915: introduce i915_error_state_buf_init
Make function for struct i915_error_state_buf initialization
and export it, for sysfs and debugfs.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 6 Jun 2013 12:18:40 +0000 (15:18 +0300)]
drm/i915: export error state ref handling
In preparation for sysfs error state access,
export ref error state ref counting interface.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 6 Jun 2013 12:18:39 +0000 (15:18 +0300)]
drm/i915: export error state to string conversion
In preparation for accessing error state from sysfs, export
error state to string conversion function. Also tuck buffer
error handling inside the function.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Tue, 25 Jun 2013 22:38:19 +0000 (01:38 +0300)]
drm/i915: flip on a no fb -> fb transition if crtc is active v3
If the crtc is active, we can simply flip a new fb onto it, provided the
other mode setting reqs are met. Otherwise, we'll need to do a full
mode set to re-enable the crtc.
v2: check for crtc active and set mode_changed accordingly
v3: add module parameter, i915.fastboot, to control no fb -> fb flip behavior
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Tue, 25 Jun 2013 22:38:18 +0000 (01:38 +0300)]
drm/i915: turn off panel fitting at flip time if needed v2
Need better pfit tracking to do this right.
v2: use fastboot param around this hack
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Wed, 26 Jun 2013 15:57:38 +0000 (18:57 +0300)]
drm/i915: copy fetched mode state into crtc at setup_hw time v5
We already fetch and track other state into the main CRTC and encoder
structs, and for fastboot we need to do the same with the mode and clock
data we read out.
v2: fix debug print
v3: use fastboot param around state copy
v4: set clock and flags for crtc here instead of in setup_hw_state
v5: rename function to intel_crtc_mode_from_pipe_config for consistency (Chris)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Wed, 26 Jun 2013 21:39:25 +0000 (00:39 +0300)]
drm/i915: get mode clock when reading the pipe config v9
We need this for comparing modes between configuration changes.
The tricky part is to allow us to reuse the new get_clock stuff to
recover the lvds clock on gen2/3 when neither the vbt has an lvds mode
nor the panel a (useful) EDID.
v2: try harder to calulate non-simple pixel clocks (Daniel)
call get_clock after getting the encoder config, needed for pixel multiply
(Jesse)
v3: drop get_clock now that the pixel_multiply has been moved into
get_pipe_config
v4: re-add get_clock; we need to get the pixel multiplier in the
encoder, so need to calculate the clock value after the encoder's
get_config is called
v5: drop hsw clock_get, still needs to be written
v6: add fuzzy clock check (Daniel)
v7: wrap fuzzy clock check under !IS_HASWELL
use port_clock field rather than a new CPU eDP clock field in crtc_config
v8: remove stale pixel_multiplier sets (Daniel)
multiply by pixel_multiplier in 9xx clock get too (Daniel)
v9: make sure we set pixel_multiplier before calling clock_get from mode_get
for LVDS (Daniel)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Add some explanation to the commit message about why we have
to jump through a few hoops. Also remove the rebase-fail hunk from
intel_sdvo.c]
[danvet: Squash in the fixup from Jesse to also call ->get_clock in
the modeset state checker.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Tue, 25 Jun 2013 22:38:15 +0000 (01:38 +0300)]
drm/i915: add fastboot param for fast & loose mode setting
Handling all the state properly for fastboot is still not yet done by
far, but we need some way to be able to test what we currently have.
So hide the not-yet-quite-complete stuff behind a module option.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Add a real commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 27 Jun 2013 17:47:19 +0000 (19:47 +0200)]
drm/i915: pixel multiplier readout support for pch ports
Now that we painstakingly track the shared pch dplls we can finally
implement pixel mutliplier readout support for pch ports, too.
v2: Undo the temporary hack to disable the sdvo pixel multiplier
cross-checking.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 27 Jun 2013 23:30:23 +0000 (16:30 -0700)]
drm/i915: Move gtt_mtrr to i915_gtt
for file in `ls drivers/gpu/drm/i915/*.c` ; do
sed -i "s/mm.gtt_mtrr/gtt.mtrr/" $file;
done
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 27 Jun 2013 23:30:21 +0000 (16:30 -0700)]
drm/i915: Move fbc members out of line
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Resolve conflict with Damien's FBC_CHIP_DEFAULT no fbc
reason.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This page took 0.050967 seconds and 5 git commands to generate.