Tom Tromey [Thu, 10 May 2018 14:38:51 +0000 (08:38 -0600)]
Fix the clang build
Simon pointed out that gdb would not build with clang, due to the
addition of -Wimplicit-fallthrough. This patch fixes the problem by
using -Wimplicit-fallthrough=3 -- this does not work with clang,
bypassing the issue.
Tested by rebuilding with both gcc and clang; and also by verifying
that -Wimplicit-fallthrough=3 is used in the gcc build.
I will file a follow-up bug to convert the fall-through comments to a
form that can be used by both clang and gcc.
gdb/ChangeLog
2018-05-10 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS): Use -Wimplicit-fallthrough=3.
gdb/gdbserver/ChangeLog
2018-05-10 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
Tamar Christina [Thu, 10 May 2018 15:24:58 +0000 (16:24 +0100)]
Allow integer immediates for AArch64 fmov instructions.
This patch makes it possible to use an integer immediate with the fmov instructions
allowing you to simply write fmov d0, #2 instead of needing fmov d0, #2.0.
The parse double function already know to deal with this so we just need to list the
restriction put in place in parser.
The is considered a QoL improvement for hand assembly writers and allows more
code portability between assembler.
gas/
* config/tc-aarch64.c (parse_aarch64_imm_float): Remove restrictions.
* testsuite/gas/aarch64/diagnostic.s: Move fmov int test to..
* testsuite/gas/aarch64/fpmov.s: Here.
* testsuite/gas/aarch64/fpmov.d: Update results with fmov.
* testsuite/gas/aarch64/diagnostic.l: Remove fmov values.
* testsuite/gas/aarch64/sve-invalid.s: Update test files.
* testsuite/gas/aarch64/sve-invalid.l: Likewise
Tamar Christina [Thu, 10 May 2018 15:22:32 +0000 (16:22 +0100)]
Allow integer immediate for VFP vmov instructions.
This patch fixes the case where you want to use an integer value the
floating point immediate to a VFP vmov instruction such as
vmovmi.f32 s27, #11.
If the immediate is not a float we convert it and copy it's representation
into the imm field and then carry on validating as if we originally entered
a floating point immediate.
The is considered a QoL improvement for hand assembly writers and allows more
code portability between assembler.
gas/
* gas/config/tc-arm.c (do_neon_mov): Allow integer literal for float
immediate.
* testsuite/gas/arm/vfp-mov-enc.s: New.
* testsuite/gas/arm/vfp-mov-enc.d: New.
Joel Brobecker [Thu, 10 May 2018 15:27:13 +0000 (10:27 -0500)]
gdbserver/Windows: crash during connection establishment phase
On Windows, starting a new process with GDBserver seems to work,
in the sense that the program does get started, and GDBserver
confirms that it is listening for GDB to connect. However, as soon as
GDB establishes the connection with GDBserver, and starts discussing
with it, GDBserver crashes, with a SEGV.
This SEGV occurs in remote-utils.c::prepare_resume_reply...
| regp = current_target_desc ()->expedite_regs;
| [...]
| while (*regp)
... because, in our case, REGP is NULL.
This patches fixes the issues by adding a parameter to init_target_desc,
in order to make sure that we always provide the list of registers when
we initialize a target description.
gdb/ChangeLog:
PR server/23158:
* regformats/regdat.sh: Adjust script, following the addition
of the new expedite_regs parameter to init_target_desc.
gdb/gdbserver/ChangeLog:
PR server/23158:
* tdesc.h (init_target_desc) <expedite_regs>: New parameter.
* tdesc.c (init_target_desc) <expedite_regs>: New parameter.
Use it to set the expedite_regs field in the given tdesc.
* x86-tdesc.h: New file.
* linux-aarch64-tdesc.c (aarch64_linux_read_description):
Adjust following the addition of the new expedite_regs parameter
to init_target_desc.
* linux-tic6x-low.c (tic6x_read_description): Likewise.
* linux-x86-tdesc.c: #include "x86-tdesc.h".
(i386_linux_read_description, amd64_linux_read_description):
Adjust following the addition of the new expedite_regs parameter
to init_target_desc.
* lynx-i386-low.c: #include "x86-tdesc.h".
(lynx_i386_arch_setup): Adjust following the addition of the new
expedite_regs parameter to init_target_desc.
* nto-x86-low.c: #include "x86-tdesc.h".
(nto_x86_arch_setup): Adjust following the addition of the new
expedite_regs parameter to init_target_desc.
* win32-i386-low.c: #include "x86-tdesc.h".
(i386_arch_setup): Adjust following the addition of the new
expedite_regs parameter to init_target_desc.
Joel Brobecker [Thu, 10 May 2018 15:24:33 +0000 (10:24 -0500)]
gdbserver/Windows: Fix "no program to debug" error
Trying to start a program with GDBserver on Windows yields
the following error:
$ gdbserver.exe --once :4444 simple_main.exe
Killing process(es): 5008
No program to debug
Exiting
The error itself comes from the following code shortly after
create_inferior gets called (in server.c::main):
/* Wait till we are at first instruction in program. */
create_inferior (program_path.get (), program_args);
[...]
if (last_status.kind == TARGET_WAITKIND_EXITED
|| last_status.kind == TARGET_WAITKIND_SIGNALLED)
was_running = 0;
else
was_running = 1;
if (!was_running && !multi_mode)
error ("No program to debug");
What happens is that the "last_status" global starts initialized
as zeroes, which means last_status.kind == TARGET_WAITKIND_EXITED,
and we expect create_inferior to be waiting for the inferior to
start until reaching the SIGTRAP, and to set the "last_status"
global to match that last event we received.
I suspect this is an unintended side-effect of the following change...
commit
2090129c36c7e582943b7d300968d19b46160d84
Date: Thu Dec 22 21:11:11 2016 -0500
Subject: Share fork_inferior et al with gdbserver
... which removes some code in server.c that was responsible for
starting the inferior in a functin that was named start_inferior,
and looked like this:
signal_pid = create_inferior (new_argv[0], &new_argv[0]);
[...]
/* Wait till we are at 1st instruction in program, return new pid
(assuming success). */
last_ptid = mywait (pid_to_ptid (signal_pid), &last_status, 0, 0);
The code has been transitioned to using fork_inferior, but sadly,
only for the targets that support it. On Windows, the calls to wait
setting "last_status" simply disappeared.
This patch adds it back in the Windows-specific implementation of
create_inferior.
gdb/gdbserver/ChangeLog:
PR server/23158:
* win32-low.c (win32_create_inferior): Add call to my_wait
setting last_status global.
Joel Brobecker [Thu, 10 May 2018 15:23:10 +0000 (10:23 -0500)]
[gdbserver/win32] fatal "glob could not process pattern '(null)'" error
Trying to start GDBserver on Windows currently yields the following
error...
$ gdbserver.exe --once :4444 simple_main.exe
glob could not process pattern '(null)'.
Exiting
... after which GDB terminates with a nonzero status.
This is because create_process in win32-low.c calls gdb_tilde_expand
with the result of a call to get_inferior_cwd without verifying that
the returned directory is not NULL:
| static BOOL
| create_process (const char *program, char *args,
| DWORD flags, PROCESS_INFORMATION *pi)
| {
| const char *inferior_cwd = get_inferior_cwd ();
| std::string expanded_infcwd = gdb_tilde_expand (inferior_cwd);
This patch avoids this by only calling gdb_tilde_expand when
INFERIOR_CWD is not NULL, which is similar to what is done on
GNU/Linux for instance.
gdb/gdbserver/ChangeLog:
PR server/23158:
* win32-low.c (create_process): Only call gdb_tilde_expand if
inferior_cwd is not NULL.
John Darrington [Thu, 10 May 2018 11:51:42 +0000 (12:51 +0100)]
Add support for detecting Freescale S12Z binaries in readelf.
* include/elf/common.h (EM_S12Z): New macro
* binutils/readelf.c (get_machine_name): EM_S12Z - handle new case.
Omair Javaid [Tue, 1 May 2018 01:31:32 +0000 (06:31 +0500)]
Fix tagged pointer support
This patch fixes tagged pointer support for AArch64 GDB. Linux kernel
debugging failure was reported after tagged pointer support was committed.
After a discussion around best path forward to manage tagged pointers
on GDB side we are going to disable tagged pointers support for
aarch64-none-elf-gdb because for non-linux applications we cant be
sure if tagged pointers will be used by MMU or not.
Also for aarch64-linux-gdb we are going to sign extend user-space
address after clearing tag bits. This will help debug both kernel
and user-space addresses based on information from linux kernel
documentation given below:
According to AArch64 memory map:
https://www.kernel.org/doc/Documentation/arm64/memory.txt
"User addresses have bits 63:48 set to 0 while the kernel addresses have
the same bits set to 1."
According to AArch64 tagged pointers document:
https://www.kernel.org/doc/Documentation/arm64/tagged-pointers.txt
The kernel configures the translation tables so that translations made
via TTBR0 (i.e. userspace mappings) have the top byte (bits 63:56) of
the virtual address ignored by the translation hardware. This frees up
this byte for application use.
Running gdb testsuite after applying this patch introduces no regressions
and tagged pointer test cases still pass.
gdb/ChangeLog:
2018-05-10 Omair Javaid <omair.javaid@linaro.org>
PR gdb/23127
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Add call to
set_gdbarch_significant_addr_bit.
* aarch64-tdep.c (aarch64_gdbarch_init): Remove call to
set_gdbarch_significant_addr_bit.
* utils.c (address_significant): Update to sign extend addr.
Stephen Crane [Thu, 10 May 2018 07:09:32 +0000 (00:09 -0700)]
Fix _GLOBAL_OFFSET_TABLE_ value for large GOTs (aarch64).
Gold resolves GOT-relative relocs relative to the GOT base +
0x8000 when the GOT is larger than 0x8000. However, previously
the _GLOBAL_OFFSET_TABLE_ symbol was set to GOT base + 0x8000
when the .got.plt was larger than 0x8000. This patch makes both
checks use the size of the .got section so that they agree when
to add 0x8000.
GDB Administrator [Thu, 10 May 2018 00:00:38 +0000 (00:00 +0000)]
Automatic date update in version.in
Max Filippov [Tue, 8 May 2018 20:49:00 +0000 (13:49 -0700)]
gas: xtensa: fix literal movement
Not all literals need to be moved in the presence of
--text-section-literals or --auto-litpools, but only those created by
.literal pseudo op or generated as a result of relaxation. Attempts to
move other literals may result in abnormal termination of the assembler
due to the following assertion failure:
Internal error in xg_find_litpool at gas/config/tc-xtensa.c:11209.
The same assertion may also be triggered by attempting to assign literal
pools to literals in .init and .fini sections; don't try to do that.
gas/
2018-05-09 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_is_init_fini): New function.
(xtensa_move_literals): Only attempt to assign literal pool to
literals with tc_frag_data.is_literal mark and not in .init or
.fini sections.
Join nested 'if' conditions to simplify function structure.
(xtensa_switch_to_non_abs_literal_fragment): Use
xtensa_is_init_fini to test for .init/.fini sections.
* testsuite/gas/xtensa/all.exp (auto-litpools-3)
(auto-litpools-4, text-section-literals-1): New tests.
* testsuite/gas/xtensa/auto-litpools-3.d: New test results.
* testsuite/gas/xtensa/auto-litpools-3.s: New test source.
* testsuite/gas/xtensa/auto-litpools-4.d: New test results.
* testsuite/gas/xtensa/auto-litpools-4.s: New test source.
* testsuite/gas/xtensa/text-section-literals-1.d: New test results.
* testsuite/gas/xtensa/text-section-literals-1.s: New test source.
H.J. Lu [Wed, 9 May 2018 18:17:26 +0000 (11:17 -0700)]
x86: Remove Disp<N> from movidir{i,64b}
* i386-opc.tbl: Remove Disp<N> from movidir{i,64b}.
Max Filippov [Wed, 25 Apr 2018 18:55:56 +0000 (11:55 -0700)]
gdb: xtensa: handle privileged registers
xtensa GDB may be used with both bare-metal and linux-based
applications. In case of bare-metal application gdbserver is able to
provide information about all CPU registers: both unprivileged and
privileged. In case of linux-based application only a small subset of
privileged state is available. Currently xtensa GDB only expects
unprivileged registers in 'g' packets and it fails to communicate with
server that sends both privileged and unprivileged registers.
Allow bare-metal xtensa GDB to deal with both privileged and
unprivileged registers by initializing tdep->num_regs with the total
number of target CPU registers. Keep linux-based xtensa GDB
functionality as is by copying tdep->num_nopriv_regs to tdep->num_regs.
gdb/
2018-05-09 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-linux-tdep.c (xtensa-tdep.h): New include.
(xtensa_linux_init_abi): Limit tdep->num_regs by
tdep->num_nopriv_regs.
* xtensa-tdep.c (xtensa_derive_tdep): Calculate
tdep->num_nopriv_regs and only copy it to tdep->num_regs if it's
not initialized.
Alan Modra [Wed, 9 May 2018 11:05:43 +0000 (20:35 +0930)]
Fix typo in od-macho.c
PR 22069
* od-macho.c (dump_unwind_encoding_x86): Fix typo in last patch.
Dimitar Dimitrov [Wed, 9 May 2018 10:39:32 +0000 (11:39 +0100)]
Fix binary compatibility between GCC and the TI compiler for the PRU target.
My original implementation for LDI32 pseudo does not conform to
the TI ABI. I wrongly documented my TI PRU ELF object files inspection,
which got propagated into my binutils implementation.
Issue was exposed when running the GCC ABI testsuite against TI toolchain.
According to TI ABI, LDI32 must use first LDI instruction to load
the MSB 16bits, and second LDI instruction for the LSB 16bits.
This patch will break binary compatibility with previously released
binutils versions for PRU. Still, I think it is better to fix
binutils to conform to the chip vendor ABI.
bfd * elf32-pru.c (pru_elf32_do_ldi32_relocate): Make LDI32 relocation
conformant to TI ABI.
(pru_elf32_relax_section): Likewise.
(pru_elf_relax_delete_bytes): Fix offsets for new LDI32 code.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Ignore addend.
(pru_elf32_pmem_relocate): Trap - should not get here.
(pru_elf32_relocate_section): Add support for REL relocations.
(elf_info_to_howto_rel): Enable REL.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
gas * config/tc-pru.c (md_apply_fix): Make LDI32 relocation conformant
to TI ABI.
(pru_assemble_arg_i): Likewise.
(output_insn_ldi32): Likewise.
* testsuite/gas/pru/ldi.d: Update test for the now fixed LDI32.
* gas/config/tc-pru.c (pru_assemble_arg_b): Check imm8 operand range.
* gas/testsuite/gas/pru/illegal2.l: New test.
* gas/testsuite/gas/pru/illegal2.s: New test.
* gas/testsuite/gas/pru/pru.exp: Register new illegal2 test.
ld * scripttempl/pru.sc: Add LD sections to allow linking TI
toolchain object files.
* scripttempl/pru.sc: Switch to init_array.
* testsuite/ld-pru/ldi32.d: Update LDI32 test to conform to TI ABI.
* testsuite/ld-pru/norelax_ldi32-data.d: Likewise.
* testsuite/ld-pru/norelax_ldi32-dis.d: Likewise.
* testsuite/ld-pru/relax_ldi32-data.d: Likewise.
* testsuite/ld-pru/relax_ldi32-dis.d: Likewise.
Alan Modra [Wed, 9 May 2018 06:20:29 +0000 (15:50 +0930)]
PR22069, Several instances of register accidentally spelled as regsiter
PR 22069
binutils/
* od-macho.c (dump_unwind_encoding_x86): Adjust for macro renaming.
cpu/ChangeLog
* or1kcommon.cpu (spr-reg-info): Typo fix.
include/ChangeLog
* mach-o/unwind.h (MACH_O_UNWIND_X86_64_RBP_FRAME_REGISTERS):
Rename from MACH_O_UNWIND_X86_64_RBP_FRAME_REGSITERS.
(MACH_O_UNWIND_X86_EBP_FRAME_REGISTERS): Rename from
MACH_O_UNWIND_X86_EBP_FRAME_REGSITERS.
opcodes/ChangeLog
* cr16-opc.c (cr16_instruction): Comment typo fix.
* hppa-dis.c (print_insn_hppa): Likewise.
sim/ppc/ChangeLog
* e500_registers.h: Comment typo fix.
* ppc-instructions (ppc_insn_mfcr): Likewise.
Alan Modra [Wed, 9 May 2018 05:48:29 +0000 (15:18 +0930)]
Regen ld potfile
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Wed, 9 May 2018 04:38:09 +0000 (14:08 +0930)]
PR23148, Heap buffer overflow in pe_print_edata
PR 23148
* peXXigen.c (pe_print_edata): Correct minimum size.
Alan Modra [Wed, 9 May 2018 04:26:34 +0000 (13:56 +0930)]
PR23147, Heap buffer overflow in pe_print_idata
PR 23147
* peXXigen.c (pe_print_idata): Bound check hint_addr.
GDB Administrator [Wed, 9 May 2018 00:00:31 +0000 (00:00 +0000)]
Automatic date update in version.in
Jim Wilson [Tue, 8 May 2018 22:46:19 +0000 (15:46 -0700)]
RISC-V: Add missing hint instructions from RV128I.
gas/
* testsuite/gas/riscv/c-zero-imm.d: Add more tests.
* testsuite/gas/riscv/c-zero-imm.s: Likewise.
* testsuite/gas/riscv/c-zero-reg.d: Fix typo in test. Add disabled
future test for RV128 support.
* testsuite/gas/riscv/c-zero-reg.s: Likewise.
include/
* opcode/riscv-opc.h (MATCH_C_SRLI64, MASK_C_SRLI64): New.
(MATCH_C_SRAI64, MASK_C_SRAI64): New.
(MATCH_C_SLLI64, MASK_C_SLLI64): New.
opcodes/
* riscv-opc.c (match_c_slli, match_slli_as_c_slli): New.
(match_c_slli64, match_srxi_as_c_srxi): New.
(riscv_opcodes) <slli, sll>: Use match_slli_as_c_slli.
<srli, srl, srai, sra>: Use match_srxi_as_c_srxi.
<c.slli, c.srli, c.srai>: Use match_s_slli.
<c.slli64, c.srli64, c.srai64>: New.
Simon Marchi [Tue, 8 May 2018 20:45:02 +0000 (16:45 -0400)]
Define GNULIB_NAMESPACE in unittests/string_view-selftests.c
When building with x86_64-w64-mingw32-g++ (to test cross-compiling for
Windows), I get this error:
unittests/string_view-selftests.o: In function `selftests::string_view::inserters_2::test05(unsigned long long)':
/home/emaisin/src/binutils-gdb/gdb/unittests/basic_string_view/inserters/char/2.cc:60: undefined reference to `std::basic_ofstream<char, std::char_traits<char> >::rpl_close()'
This is caused by gnulib redefining "close" as "rpl_close", and
therefore messing up the declaration of basic_ofstream in the libstdc++
header. The solution would be to use gnulib namespaces [1]. Until we
use them across GDB, we can use them locally in files that are
problematic, like this one.
gdb/ChangeLog:
* unittests/string_view-selftests.c: Define GNULIB_NAMESPACE.
Jim Wilson [Tue, 8 May 2018 20:34:03 +0000 (13:34 -0700)]
RISC-V: New emulations to make path searches follow glibc ABI.
ld/
PR ld/22962
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32lriscv_ilp32f.c,
eelf32lriscv_ilp32.c, eelf64lriscv_lp64f.c, eelf64lriscv_lp64.c.
(eelf32lriscv_ilp32f.c, eelf32lriscv_ilp32.c): New build rules.
(eelf64lriscv_lp64f.c, eelf64lriscv_lp64.c): New build rules.
* Makefile.in: Regenerated.
* configure.tgt (riscv32*-*-linux*, riscv64*-*-linux*): New.
* ld/emulparams/elf32lriscv.sh: Set LIBPATH_SUFFIX.
* ld/emulparams/elf32lriscv_ilp32.sh: New.
* ld/emulparams/elf32lriscv_ilp32f.sh: New.
* ld/emulparams/elf64lriscv-defs.sh: Don't set LIBPATH_SUFFIX here.
* ld/emulparams/elf64lriscv.sh: Set LIBPATH_SUFFIX.
* ld/emulparams/elf64lriscv_lp64.sh: New.
* ld/emulparams/elf64lriscv_lp64f.sh: New.
* ld/genscripts.sh (append_to_lib_path): Change LIBPATH_SUFFIX test to
a for. Inside loop, change LIBPATH_SUFFIX uses to libpath_suffix.
(LIB_PATH): In LIB_PATH if, add loop for LIBPATH_SUFFIX, changes uses
inside loop to libpath_suffix.
Andrew Burgess [Thu, 3 May 2018 16:46:14 +0000 (17:46 +0100)]
gdb/x86: Handle kernels using compact xsave format
For GNU/Linux on x86-64, if the target is using the xsave format for
passing the floating-point information from the inferior then there
currently exists a bug relating to the x87 control registers, and the
mxcsr register.
The xsave format allows different floating-point features to be lazily
enabled, a bit in the xsave format tells GDB which floating-point
features have been enabled, and which have not.
Currently in GDB, when reading the floating point state, we check the
xsave bit flags, if the feature is enabled then we read the feature
from the xsave buffer, and if the feature is not enabled, then we
supply the default value from within GDB.
Within GDB, when writing the floating point state, we first fetch the
xsave state from the target and then, for any feature that is not yet
enabled, we write the default values into the xsave buffer. Next we
compare the regcache value with the value in the xsave buffer, and, if
the value has changed we update the value in the xsave buffer, and
mark the feature enabled in the xsave bit flags.
The problem then, is that the x87 control registers were not following
this pattern. We assumed that these registers were always written out
by the kernel, and we always wrote them out to the xsave buffer (but
didn't enabled the feature). The result of this is that if the kernel
had not yet enabled the x87 feature then within GDB we would see
random values for the x87 floating point control registers, and if the
user tried to modify one of these register, that modification would be
lost.
Finally, the mxcsr register was also broken in the same way as the x87
control registers. The added complexity with this case is that the
mxcsr register is part of both the avx and sse floating point feature
set. When reading or writing this register we need to check that at
least one of these features is enabled.
This bug was present in native GDB, and within gdbserver. Both are
fixed with this commit.
gdb/ChangeLog:
* common/x86-xstate.h (I387_FCTRL_INIT_VAL): New constant.
(I387_MXCSR_INIT_VAL): New constant.
* amd64-tdep.c (amd64_supply_xsave): Only read state from xsave
buffer if it was supplied by the inferior.
* i387-tdep.c (i387_supply_fsave): Use I387_MXCSR_INIT_VAL.
(i387_xsave_get_clear_bv): New function.
(i387_supply_xsave): Only read x87 control registers from the
xsave buffer if the feature is enabled, and the state will have
been written, otherwise, provide a suitable default.
(i387_collect_xsave): Pre-clear all registers in xsave buffer,
including x87 control registers. Update control registers if they
have changed from the default value, and mark features as enabled
as required.
* i387-tdep.h (i387_xsave_get_clear_bv): Declare.
gdb/gdbserver/ChangeLog:
* i387-fp.c (i387_cache_to_xsave): Only write x87 control
registers to the cache if their values have changed.
(i387_xsave_to_cache): Provide default values for x87 control
registers when these features are available, but disabled.
* regcache.c (supply_register_by_name_zeroed): New function.
* regcache.h (supply_register_by_name_zeroed): Declare new
function.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-init-x87-values.S: New file.
* gdb.arch/amd64-init-x87-values.exp: New file.
Alan Modra [Tue, 8 May 2018 05:02:04 +0000 (14:32 +0930)]
PR23141, SIGSEGV in bfd_elf_set_group_contents
Another fuzzing fix. I think it's reasonable to simply strip out any
group section that is too weird for objcopy to handle.
PR 23141
* objcopy.c (is_strip_section): Strip groups without a valid
signature symbol.
Alan Modra [Mon, 7 May 2018 02:05:22 +0000 (11:35 +0930)]
Correct powerpc spe opcode lookup
Defining SPE2_OPCD_SEGS as 13 discounts the possibility that we'd
ever look up spe2_opcd_indices[14..16], which I think is possible.
Extend that array to size 16+1, using the macros we use to index the
array. Similarly use the index macros for PPC_OPCD_SEGS and
VLE_OPCD_SEGS.
* ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP.
(VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to
partition opcode space for index lookup.
Jan Kratochvil [Tue, 8 May 2018 12:26:19 +0000 (14:26 +0200)]
watchpoint-unaligned.exp: Use skip_hw_watchpoint_tests
gdb/testsuite/ChangeLog
2018-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/watchpoint-unaligned.exp: Use skip_hw_watchpoint_tests.
Ulrich Weigand [Tue, 8 May 2018 12:13:12 +0000 (14:13 +0200)]
[spu] Fix "info spu event" output formatting
The formatting of the output of the "info spu event" command changed, causing
spurious test suite failures. Use phex instead of phex_nz to get back the
expected format, and fix emission of new line characters.
gdb/ChangeLog:
2018-05-08 Ulrich Weigand <uweigand@de.ibm.com>
* spu-tdep.c (info_spu_event_command): Fix output formatting.
Nick Clifton [Tue, 8 May 2018 11:51:06 +0000 (12:51 +0100)]
Prevent a memory exhaustion failure when running objdump on a fuzzed input file with corrupt string and attribute sections.
PR 22809
* elf.c (bfd_elf_get_str_section): Check for an excessively large
string section.
* elf-attrs.c (_bfd_elf_parse_attributes): Issue an error if the
attribute section is larger than the size of the file.
Peter Bergner [Tue, 8 May 2018 01:47:54 +0000 (20:47 -0500)]
Simplify VLE handling in print_insn_powerpc().
opcodes/
* ppc-dis.c (print_insn_powerpc) <insn_is_short>: Replace this...
<insn_length>: ...with this. Update usage.
Remove duplicate call to *info->memory_error_func.
H.J. Lu [Mon, 7 May 2018 16:30:02 +0000 (09:30 -0700)]
Enable Intel MOVDIRI, MOVDIR64B instructions
gas/
* config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b.
(cpu_noarch): Likewise.
(process_suffix): Add check for register size.
* doc/c-i386.texi: Document movdiri, movdir64b.
* testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests.
* testsuite/gas/i386/movdir-intel.d: New file.
* testsuite/gas/i386/movdir.d: Likewise.
* testsuite/gas/i386/movdir.s: Likewise.
* testsuite/gas/i386/movdir64b-reg.s: Likewise.
* testsuite/gas/i386/movdir64b-reg.l: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise.
* testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise.
opcodes/
* i386-dis.c (Gva): New.
(enum): Add PREFIX_0F38F8, PREFIX_0F38F9,
MOD_0F38F8_PREFIX_2, MOD_0F38F9_PREFIX_0.
(prefix_table): New instructions (see prefix above).
(mod_table): New instructions (see prefix above).
(OP_G): Handle va_mode.
* i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS,
CPU_MOVDIR64B_FLAGS.
(cpu_flags): Add CpuMOVDIRI and CpuMOVDIR64B.
* i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B.
(i386_cpu_flags): Add cpumovdiri and cpumovdir64b.
* i386-opc.tbl: Add movidir{i,64b}.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
H.J. Lu [Mon, 7 May 2018 16:57:06 +0000 (09:57 -0700)]
x86: Replace AddrPrefixOp0 with AddrPrefixOpReg
This patch replaces AddrPrefixOp0 with AddrPrefixOpReg to indicate that
the size of register operand is controlled by the address size prefix.
This will be used by Intel MOVDIRI and MOVDIR64B instructions later.
gas/
* config/tc-i386.c (process_suffix): Check addrprefixopreg
instead of addrprefixop0.
opcodes/
* i386-gen.c (opcode_modifiers): Replace AddrPrefixOp0 with
AddrPrefixOpReg.
* i386-opc.h (AddrPrefixOp0): Renamed to ...
(AddrPrefixOpReg): This.
(i386_opcode_modifier): Rename addrprefixop0 to addrprefixopreg.
* i386-opc.tbl: Replace AddrPrefixOp0 with AddrPrefixOpReg.
Tom Tromey [Sat, 21 Apr 2018 18:00:29 +0000 (12:00 -0600)]
Add -Wduplicated-cond
This adds -Wduplicated-cond to warnings.m4. This caught one bug.
I tried adding -Wduplicated-branches as well, but it results in some
spurious failures from code like this in cgen.h:
#define CGEN_ATTR_TYPE(n) \
struct { unsigned int bool_; \
CGEN_ATTR_VALUE_TYPE nonbool[(n) ? (n) : 1]; }
This will trigger a warning if passed n==1, which seems like a
perfectly valid thing to do; and there were other issues like this as
well.
ChangeLog
2018-05-07 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS): Add -Wduplicated-cond.
gdbserver/ChangeLog
2018-05-07 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
Tom Tromey [Sat, 21 Apr 2018 17:51:34 +0000 (11:51 -0600)]
Fix decoding of ARM VFP instructions
-Wduplicated-cond pointed out that arm_record_vfp_data_proc_insn
checks "opc1 == 0x0b" twice. I filed this a while ago as
PR tdep/20362.
Based on the ARM instruction manual at
https://www.scss.tcd.ie/~waldroj/3d1/arm_arm.pdf, I think the
instruction decoding in this function has two bugs.
First, opc1 is computed as:
opc1 = bits (arm_insn_r->arm_insn, 20, 23);
[...]
opc1 = opc1 & 0x04;
This means that tests like:
else if (opc1 == 0x01)
can never be true.
In the ARM manual, "opc1" corresponds to these bits:
name bit
r 20
q 21
D 22
p 23
... where the D bit is not used for VFP instruction decoding.
So, I believe this code should use ~0x04 instead.
Second, VDIV is recognized by the bits "pqrs" being equal to "1000".
This tranlates to opc1 == 0x08 -- not 0x0b. Note that pqrs==1001 is
an undefined encoding, which is probably why opc2 is not checked here;
this code doesn't seem to really deal with undefined encodings in
general, so I've left that as is.
I don't have an ARM machine or any reasonable way to test this.
ChangeLog
2018-05-07 Tom Tromey <tom@tromey.com>
PR tdep/20362:
* arm-tdep.c (arm_record_vfp_data_proc_insn): Properly mask off D
bit. Use correct value for VDIV.
Peter Bergner [Mon, 7 May 2018 14:40:59 +0000 (09:40 -0500)]
Cleanup ppc code dealing with opcode dumps.
include/
* opcode/ppc.h (powerpc_num_opcodes): Change type to unsigned.
(vle_num_opcodes): Likewise.
(spe2_num_opcodes): Likewise.
opcodes/
* ppc-opc.c (powerpc_num_opcodes): Likewise.
(vle_num_opcodes): Likewise.
(spe2_num_opcodes): Likewise.
* ppc-dis.c (disassemble_init_powerpc) <powerpc_opcd_indices>: Rewrite
initialization loop.
(disassemble_init_powerpc) <vle_opcd_indices>: Likewise.
(disassemble_init_powerpc) <spe2_opcd_indices>: Likewise. Initialize
only once.
gas/
* config/tc-ppc.c (ppc_setup_opcodes) <powerpc_opcodes>: Rewrite code
to dump the entire opcode table.
(ppc_setup_opcodes) <spe2_opcodes>: Likewise.
(ppc_setup_opcodes) <vle_opcodes>: Likewise. Fix calculation of
opcode index.
Alan Modra [Mon, 7 May 2018 13:11:47 +0000 (22:41 +0930)]
Bug 23142, SIGSEGV in is_strip_section
PR 23142
* objcopy.c (group_signature): Don't accept groups that use a
symbol table other than the one we've read.
Alan Modra [Mon, 7 May 2018 02:06:07 +0000 (11:36 +0930)]
Replace uses of strncmp with memcmp
Avoids gcc pr85623 for these calls.
* cofflink.c (_bfd_coff_link_input_bfd): Use memcmp rather than
strncmp when checking for ".bf" special symbol.
* prXXigen.c (_bfd_XXi_swap_scnhdr_out): Make pe_required_section_flags
section name a char array, remove sentinal known_sections entry,
and adjust loop over known_sections to suit. Use memcmp rather
than strncmp.
H.J. Lu [Mon, 7 May 2018 02:16:47 +0000 (19:16 -0700)]
gas/i386/xmmhi32.d: Also allow dir32 relocation
Also allow dir32 relocation to support mingw targets.
* testsuite/gas/i386/xmmhi32.d: Also allow dir32 relocation.
H.J. Lu [Mon, 7 May 2018 02:09:12 +0000 (19:09 -0700)]
i386: Append ".p2align 4,0" to gas tests
Append ".p2align 4,0" to i386 assembler tests to support mingw targets.
* testsuite/gas/i386/avx512f-plain.s: Append ".p2align 4,0".
* testsuite/gas/i386/avx512vl-plain.s: Likewise.
* testsuite/gas/i386/bnd.s: Likewise.
* testsuite/gas/i386/stN.s: Likewise.
* testsuite/gas/i386/avx512f-plain.l: Updated.
* testsuite/gas/i386/avx512vl-plain.l: Likewise.
* testsuite/gas/i386/bnd.l: Likewise.
* testsuite/gas/i386/stN.l: Likewise.
GDB Administrator [Mon, 7 May 2018 00:00:38 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 6 May 2018 00:01:01 +0000 (00:01 +0000)]
Automatic date update in version.in
Tom Tromey [Thu, 18 Aug 2016 16:56:11 +0000 (10:56 -0600)]
Add -Wimplicit-fallthrough
This adds -Wimplicit-fallthrough to the set of default warnings.
2018-05-04 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS): Add -Wimplicit-fallthrough.
gdbserver/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
Tom Tromey [Thu, 5 Apr 2018 21:37:56 +0000 (15:37 -0600)]
Add a missing break in record_linux_system_call
This adds a "break" at the end of the RECORD_SYS_RECVFROM case in
record_linux_system_call. This seemed correct to me.
2018-05-04 Tom Tromey <tom@tromey.com>
* linux-record.c (record_linux_system_call) <case
RECORD_SYS_RECVFROM>: Add "break".
Tom Tromey [Thu, 19 Apr 2018 20:48:51 +0000 (14:48 -0600)]
Add missing "breaks"
This adds a "break" to a couple of spots where it was erroneously
omitted. I think these are the two (potential) real bugs caught by
this series.
2018-05-04 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (mi_cmd_trace_frame_collected) <REGISTERS_FORMAT>:
Add missing "break".
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals) <NO_FRAME_FILTERS>:
Add missing "break".
Tom Tromey [Thu, 5 Apr 2018 22:09:29 +0000 (16:09 -0600)]
Add two fall-through comments in rs6000-tdep.c
This adds two fall-through comments in rs6000-tdep.c. I looked at the
PPC instruction manual and convinced myself that this was correct.
And, this isn't a semantic change. However, close review would still
be good.
2018-05-04 Tom Tromey <tom@tromey.com>
* rs6000-tdep.c (ppc_process_record_op4)
(ppc_process_record_op63): Add fall-through comment.
Tom Tromey [Thu, 5 Apr 2018 22:01:36 +0000 (16:01 -0600)]
Add fall-through comment to i386-tdep.c
This adds a fall-through comment in i386-tdep.c. I was not sure what
to do here, so I elected to preserve the status quo. In review, John
Baldwin pointed out that: "I believe this is correct based on the diff
that added the special cases for xgetbv and xsetbv as previously ldgt
and lidt were treated the same".
gdb/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* i386-tdep.c (i386_process_record): Add fall-through comment.
Tom Tromey [Thu, 5 Apr 2018 21:39:57 +0000 (15:39 -0600)]
Add a fall-through comment to stabsread.c
This adds a fall-through comment to stabsread.c. I skimmed the stabs
manual a bit and it seems that 'p' and 'P' are similar enough that
this makes sense. Also, stabs is mostly deprecated, and the code has
been this way for a long time, so it seemed safest to keep the status
quo.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* stabsread.c (define_symbol) <case 'p'>: Add fall-through
comment.
Tom Tromey [Tue, 27 Sep 2016 17:28:18 +0000 (11:28 -0600)]
Fix "obvious" fall-through warnings
This patch fixes the subset of -Wimplicit-fallthrough warnings that I
considered obvious. In most cases it was obvious from context that
falling through was desired; here I added the appropriate comment. In
a couple of cases it seemed clear that a "break" was missing.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* riscv-tdep.c (riscv_isa_xlen): Add fall-through comment.
* utils.c (can_dump_core) <LIMIT_CUR>: Add fall-through comment.
* eval.c (fetch_subexp_value) <MEMORY_ERROR>: Add fall-through
comment.
* d-valprint.c (d_val_print) <TYPE_CODE_STRUCT>: Add fall-through
comment.
* coffread.c (coff_symtab_read) <C_LABEL>: Add fall-through
comment.
Tom Tromey [Tue, 27 Sep 2016 17:23:49 +0000 (11:23 -0600)]
Add missing ATTRIBUTE_NORETURNs
This patch adds a missing ATTRIBUTE_NORETURN. This lets
-Wimplicit-fallthrough recognize that a given case does not fall
through.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* dwarf2loc.c (unimplemented): Add ATTRIBUTE_NORETURN.
Tom Tromey [Tue, 27 Sep 2016 17:18:04 +0000 (11:18 -0600)]
Fix "fall through" comments
This patch updates existing "fall through" comments so that they can
be recognized by gcc's -Wimplicit-fallthrough comment-parsing
heuristic.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* s390-tdep.c (s390_process_record): Fix fall-through comments.
* xcoffread.c (scan_xcoff_symtab): Move comment later.
* symfile.c (section_is_mapped): Fix fall-through comment.
* stabsread.c (define_symbol, read_member_functions): Fix
fall-through comment.
* s390-linux-tdep.c (s390_process_record): Fix fall-through
comment.
* remote.c (remote_wait_as): Fix fall-through comment.
* p-exp.y (yylex): Fix fall-through comment.
* nat/x86-dregs.c (x86_length_and_rw_bits): Fix fall-through
comment.
* msp430-tdep.c (msp430_gdbarch_init): Fix fall-through comment.
* mdebugread.c (parse_partial_symbols): Fix fall-through comment.
* jv-exp.y (yylex): Fix fall-through comment.
* go-exp.y (lex_one_token): Fix fall-through comment.
* gdbtypes.c (get_discrete_bounds, rank_one_type): Fix
fall-through comment.
* f-exp.y (yylex): Fix fall-through comment.
* dwarf2read.c (process_die): Fix fall-through comments.
* dbxread.c (process_one_symbol): Fix fall-through comment.
* d-exp.y (lex_one_token): Fix fall-through comment.
* cp-name-parser.y (yylex): Fix fall-through comment.
* coffread.c (coff_symtab_read): Fix fall-through comment.
* c-exp.y (lex_one_token): Fix fall-through comment.
* arm-tdep.c (arm_decode_miscellaneous): Fix fall-through
comment.
* arch/arm.c (arm_instruction_changes_pc): Fix fall-through
comment.
GDB Administrator [Sat, 5 May 2018 00:00:43 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Thu, 19 Apr 2018 02:10:43 +0000 (20:10 -0600)]
Let gdb.execute handle multi-line commands
This changes the Python API so that gdb.execute can now handle
multi-line commands, like "commands" or "define".
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22730:
* NEWS: Mention gdb.execute change.
* gdbcmd.h (execute_control_command): Don't declare.
* python/python.c (execute_gdb_command): Use read_command_lines_1,
execute_control_commands, execute_control_commands_to_string.
* cli/cli-script.h (execute_control_commands)
(execute_control_commands_to_string): Declare.
(execute_control_command): Add from_tty parameter.
* cli/cli-script.c (execute_control_commands)
(execute_control_commands_to_string): New functions.
(execute_user_command): Use execute_control_commands.
(execute_control_command_1): Add "from_tty" parameter. Update.
(execute_control_command): Likewise.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22730:
* gdb.python/python.exp: Test multi-line execute.
Tom Tromey [Wed, 18 Apr 2018 23:37:56 +0000 (17:37 -0600)]
Allow breakpoint commands to be set from Python
This changes the Python API so that breakpoint commands can be set by
writing to the "commands" attribute.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* NEWS: Mention that breakpoint commands are writable.
* python/py-breakpoint.c (bppy_set_commands): New function.
(breakpoint_object_getset) <"commands">: Use it.
doc/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* python.texi (Breakpoints In Python): Mention that "commands" is
writable.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* gdb.python/py-breakpoint.exp: Test setting breakpoint commands.
Tom Tromey [Wed, 18 Apr 2018 22:53:07 +0000 (16:53 -0600)]
Use function_view in cli-script.c
This changes some functions in cli-script.c to use function_view
rather than a function pointer and closure argument. This simplifies
the code a bit and is useful in a subsequent patch.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (actions_command): Update.
* mi/mi-cmd-break.c (mi_command_line_array)
(mi_command_line_array_cnt, mi_command_line_array_ptr)
(mi_read_next_line): Remove.
(mi_cmd_break_commands): Update.
* cli/cli-script.h (read_command_lines, read_command_lines_1): Use
function_view.
* cli/cli-script.c (get_command_line): Update.
(process_next_line): Use function_view. Constify.
(recurse_read_control_structure, read_command_lines)
(read_command_lines_1): Change argument types to function_view.
(do_define_command, document_command): Update.
* breakpoint.h (check_tracepoint_command): Don't declare.
* breakpoint.c (check_tracepoint_command): Remove.
(commands_command_1, create_tracepoint_from_upload): Update.
Tom Tromey [Wed, 18 Apr 2018 22:10:59 +0000 (16:10 -0600)]
Allow defining a user command inside a user command
PR gdb/11750 concerns defining a command inside a user commnad, like:
define outer
define inner
echo hi\n
end
end
This patch adds this capability to gdb.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/11750:
* cli/cli-script.h (enum command_control_type) <define_control>:
New constant.
* cli/cli-script.c (multi_line_command_p): Handle define_control.
(build_command_line, execute_control_command_1)
(process_next_line): Likewise.
(do_define_command): New function, extracted from define_command.
(define_command): Use it.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/11750:
* gdb.base/define.exp: Test defining a user command inside a user
command.
* gdb.base/commands.exp (define_if_without_arg_test): Test "define".
Tom Tromey [Wed, 18 Apr 2018 21:59:04 +0000 (15:59 -0600)]
Constify prompt argument to read_command_lines
The prompt argument to read_command_lines can be const. This patch
makes this change, and also removes some fixed-sized buffers in favor
of using string_printf.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (actions_command): Update.
* cli/cli-script.h (read_command_lines): Update.
* cli/cli-script.c (read_command_lines): Constify prompt_arg.
(MAX_TMPBUF): Remove define.
(define_command): Use string_printf.
(document_command): Likewise.
* breakpoint.c (commands_command_1): Update.
Tom Tromey [Wed, 18 Apr 2018 21:40:57 +0000 (15:40 -0600)]
Make print_command_trace varargs
I noticed some code in execute_control_command_1 that could be
simplified by making print_command_trace a printf-like function. This
patch makes this change.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* top.c (execute_command): Update.
* cli/cli-script.h (print_command_lines): Now varargs.
* cli/cli-script.c (print_command_lines): Now varargs.
(execute_control_command_1) <case while_control, case if_control>:
Update.
Tom Tromey [Tue, 17 Apr 2018 05:13:18 +0000 (23:13 -0600)]
Use counted_command_line everywhere
Currently command lines are reference counted using shared_ptr only
when attached to breakpoints. This patch changes gdb to use
shared_ptr in commands as well. This allows for the removal of
copy_command_lines.
Note that the change to execute_user_command explicitly makes a new
reference to the command line. This will be used in a later patch.
This simplifies struct command_line based on the observation that a
given command can have at most two child bodies: an "if" can have both
"then" and "else" parts. Perhaps the names I've chosen for the
replacements here are not very good -- your input requested.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (all_tracepoint_actions): Rename from
all_tracepoint_actions_and_cleanup. Change return type.
(actions_command, encode_actions_1, encode_actions)
(trace_dump_actions, tdump_command): Update.
* remote.c (remote_download_command_source): Update.
* python/python.c (gdbpy_eval_from_control_command)
(python_command, python_interactive_command): Update.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Update.
* guile/guile.c (guile_command)
(gdbscm_eval_from_control_command, guile_command): Update.
* compile/compile.c (compile_code_command)
(compile_print_command, compile_to_object): Update.
* cli/cli-script.h (struct command_lines_deleter): New.
(counted_command_line): New typedef.
(struct command_line): Add constructor, destructor.
<body_list>: Remove.
<body_list_0, body_list_1>: New members.
(command_line_up): Remove typedef.
(read_command_lines, read_command_lines_1, get_command_line):
Update.
(copy_command_lines): Don't declare.
* cli/cli-script.c (build_command_line): Use "new".
(get_command_line): Return counted_command_line.
(print_command_lines, execute_user_command)
(execute_control_command_1, while_command, if_command): Update.
(realloc_body_list): Remove.
(process_next_line, recurse_read_control_structure): Update.
(read_command_lines, read_command_lines_1): Return counted_command_line.
(free_command_lines): Use "delete".
(copy_command_lines): Remove.
(define_command, document_command, show_user_1): Update.
* cli/cli-decode.h (struct cmd_list_element) <user_commands>: Now
a counted_command_line.
* breakpoint.h (counted_command_line): Remove typedef.
(breakpoint_set_commands): Update.
* breakpoint.c (check_no_tracepoint_commands)
(validate_commands_for_breakpoint): Update.
(breakpoint_set_commands): Change commands to be a
counted_command_line.
(commands_command_1, update_dprintf_command_list)
(create_tracepoint_from_upload): Update.
Tom Tromey [Tue, 17 Apr 2018 03:09:48 +0000 (21:09 -0600)]
Allocate cmd_list_element with new
This adds a constructor and destructor to cmd_list_element and changes
it to be allocated with new. This will be useful in a subsequent
patch.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* cli/cli-decode.h (cmd_list_element): New constructor.
(~cmd_list_element): New destructor.
(struct cmd_list_element): Add initializers.
* cli/cli-decode.c (do_add_cmd): Use "new".
(delete_cmd): Use "delete".
Jan Kratochvil [Fri, 4 May 2018 20:22:04 +0000 (22:22 +0200)]
aarch64: PR 19806: watchpoints: false negatives + PR 20207 contiguous ones
Some unaligned watchpoints were currently missed.
On old kernels as specified in
kernel RFE: aarch64: ptrace: BAS: Support any contiguous range (edit)
https://sourceware.org/bugzilla/show_bug.cgi?id=20207
after this patch some other unaligned watchpoints will get reported as false
positives.
With new kernels all the watchpoints should work exactly.
There may be a regresion that it now less merges watchpoints so that with
multiple overlapping watchpoints it may run out of the 4 hardware watchpoint
registers. But as discussed in the original thread GDB needs some generic
watchpoints merging framework to be used by all the target specific code.
Even current FSF GDB code does not merge it perfectly. Also with the more
precise watchpoints one can technically merge them less. And I do not think
it matters too much to improve mergeability only for old kernels.
Still even on new kernels some better merging logic would make sense.
There remains one issue:
kernel-4.15.14-300.fc27.armv7hl
FAIL: gdb.base/watchpoint-unaligned.exp: continue
FAIL: gdb.base/watchpoint-unaligned.exp: continue
(gdb) continue
Continuing.
Unexpected error setting watchpoint: Invalid argument.
(gdb) FAIL: gdb.base/watchpoint-unaligned.exp: continue
But that looks as a kernel bug to me.
(1) It is not a regression by this patch.
(2) It is unrelated to this patch.
gdb/ChangeLog
2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/19806 and support for PR external/20207.
* NEWS: Mention Aarch64 watchpoint improvements.
* aarch64-linux-nat.c (aarch64_linux_stopped_data_address): Fix missed
watchpoints and PR external/20207 watchpoints.
* nat/aarch64-linux-hw-point.c
(kernel_supports_any_contiguous_range): New.
(aarch64_watchpoint_offset): New.
(aarch64_watchpoint_length): Support PR external/20207 watchpoints.
(aarch64_point_encode_ctrl_reg): New parameter offset, new asserts.
(aarch64_point_is_aligned): Support PR external/20207 watchpoints.
(aarch64_align_watchpoint): New parameters aligned_offset_p and
next_addr_orig_p. Support PR external/20207 watchpoints.
(aarch64_downgrade_regs): New.
(aarch64_dr_state_insert_one_point): New parameters offset and
addr_orig.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Update caller.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Support addr_orig and
aligned_offset.
(aarch64_linux_set_debug_regs): Remove const from state. Call
aarch64_downgrade_regs.
(aarch64_show_debug_reg_state): Print also dr_addr_orig_wp.
* nat/aarch64-linux-hw-point.h (DR_CONTROL_LENGTH): Rename to ...
(DR_CONTROL_MASK): ... this.
(struct aarch64_debug_reg_state): New field dr_addr_orig_wp.
(unsigned int aarch64_watchpoint_offset): New prototype.
(aarch64_linux_set_debug_regs): Remove const from state.
* utils.c (align_up, align_down): Move to ...
* common/common-utils.c (align_up, align_down): ... here.
* utils.h (align_up, align_down): Move to ...
* common/common-utils.h (align_up, align_down): ... here.
gdb/gdbserver/ChangeLog
2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* linux-aarch64-low.c (aarch64_stopped_data_address):
Likewise.
gdb/testsuite/ChangeLog
2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/19806 and support for PR external/20207.
* gdb.base/watchpoint-unaligned.c: New file.
* gdb.base/watchpoint-unaligned.exp: New file.
Andrew Burgess [Fri, 4 May 2018 11:54:10 +0000 (12:54 +0100)]
gdb: Make test names unique in gdb.base/maint.exp
Add prefixes or suffixes to some test names to make them unique.
Replace a send_gdb/gdb_expect with a gdb_test, and make the test name
unique.
Remove test of 'help maint' as this is already covered by a later call
to test_prefix_command_help.
Removed test of 'help maint info' and add a new call to
test_prefix_command_help instead.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Make test names unique, use
test_prefix_command_help to test 'help maint info', and remove
repeated test of 'help maint'.
Joel Brobecker [Fri, 4 May 2018 18:33:19 +0000 (13:33 -0500)]
(SPARC/LEON) fix incorrect array return value printed by "finish"
Consider the code in the gdb.ada/array_return.exp testcase, which
defines a function returning an array of 2 integers:
type Data_Small is array (1 .. 2) of Integer;
function Create_Small return Data_Small;
When doing a "finish" from inside function Create_Small, we expect
GDB to tell us that the return value was "(1, 1)". However, it currently
prints the wrong value:
(gdb) finish
Run till exit from #0 pck.create_small () at /[...]/pck.adb:5
p () at /[...]/p.adb:10
10 Large := Create_Large;
Value returned is $1 = (0, 0)
This is a regression which I traced back to the following commit...
| commit
1933fd8ee01ad2e74a9c6341bc40f54962a8f889
| Date: Fri May 19 03:06:19 2017 -0700
| Subject: gdb: fix TYPE_CODE_ARRAY handling in sparc targets
... which, despite what the subject says, is not really about
TYPE_CODE_ARRAY handling, which is a bit of an implementation detail,
but about the GNU vectors extension.
The author of the patch equated TYPE_CODE_ARRAY with vectors, which
is not correct. Vectors are TYPE_CODE_ARRAY types with the TYPE_VECTOR
flag set. So at the very minimum, the patch should have been checking
for both TYPE_CODE_ARRAY and TYPE_VECTOR.
But, that's not the only thing that did not seem right to me. When
looking at the ABI, and at the summary of the implementation in GCC
of the calling conventions for that architecture:
size argument return value
small integer <4 int. reg. int. reg.
word 4 int. reg. int. reg.
double word 8 int. reg. int. reg.
_Complex small integer <8 int. reg. int. reg.
_Complex word 8 int. reg. int. reg.
_Complex double word 16 memory int. reg.
vector integer <=8 int. reg. FP reg.
vector integer >8 memory memory
float 4 int. reg. FP reg.
double 8 int. reg. FP reg.
long double 16 memory memory
_Complex float 8 memory FP reg.
_Complex double 16 memory FP reg.
_Complex long double 32 memory FP reg.
vector float any memory memory
aggregate any memory memory
The nice thing about the patch above is that it nicely factorized
the code that determines how arguments are passed/returns. The bad
news is that the implementation, particularly for the handling of
arrays and vectors, doesn't seem to match the summary above. Hence,
the regression we observed.
So what I did was review and re-implement some of the predicate functions
according to the summary above. Because dejagnu crashes all our Solaris
machines real bad, I can't run the dejagnu testsuite there. So what I did
was test the patch with AdaCore's testsuite against leon3-elf, no
regression. I verified that this fixes the regression above while
at the same time still passing gdb.base/gnu_vector.exp (I transposed
that testcase to our testsuite), which is the testcase that was cited
in the commit above as seeing some FAIL->PASS improvements.
This patch also removes one assertion...
gdb_assert (sparc_integral_or_pointer_p (type)
|| (TYPE_CODE (type) == TYPE_CODE_ARRAY && len <= 8));
... because that assertion is really the "negative" of the other conditions
written in the same "if, else if, else [assert]" block in this function.
To me, this assertion forces us to maintain two versions of the same code,
and is an unnecessary burden. In particular, the above is not the
correct condition, and the ABI summary table above shows that we need
a more complex condition to describe the situations where we expect
arguments to be passed by register.
gdb/ChangeLog:
* sparc-tdep.c (sparc_structure_return_p): Re-implement to
match the ABI as summarized in GCC's gcc/config/sparc/sparc.c.
(sparc_arg_by_memory_p): Renamed from sparc_arg_on_registers_p.
Re-implement to match the ABI as summarized in GCC's
gcc/config/sparc/sparc.c. All callers updated.
(sparc32_store_arguments): Remove assertion.
Tom Tromey [Fri, 27 Apr 2018 22:04:13 +0000 (16:04 -0600)]
Minor cleanups in printcmd.c
This changes decode_format to use skip_spaces, and changes printcmd.c
not to include tui.h, which apparently is not needed.
2018-05-04 Tom Tromey <tom@tromey.com>
* printcmd.c: Don't include tui.h.
(decode_format): Use skip_spaces.
Tom Tromey [Fri, 27 Apr 2018 21:52:44 +0000 (15:52 -0600)]
Use previous count when 'x' command is repeated
About the 'x' command, the manual says:
If you use <RET> to repeat the 'x' command, the repeat count N is
used again; the other arguments default as for successive uses of
'x'.
However, PR gdb/22619 points out that this does not work.
This patch fixes the problem.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/22619:
* printcmd.c (last_count): New global.
(x_command): Use saved count when repeating.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/22619:
* gdb.base/long_long.exp (gdb_test_long_long): Add test for repeat
behavior.
Tom Tromey [Thu, 3 May 2018 06:18:20 +0000 (00:18 -0600)]
Remove do_closedir_cleanup
This removes both copies of do_closedir_cleanup in favor of a new
unique_ptr specialization.
Tested by the buildbot, though I'm not sure that these code paths are
exercised there.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* nto-procfs.c (do_closedir_cleanup): Remove.
(procfs_pidlist): Use gdb_dir_up.
* procfs.c (do_closedir_cleanup): Remove.
(proc_update_threads): Use gdb_dir_up.
* common/filestuff.h (struct gdb_dir_deleter): New.
(gdb_dir_up): New typedef.
Tom Tromey [Fri, 10 Nov 2017 21:42:35 +0000 (14:42 -0700)]
Remove cleanup from print_mention_exception
This removes a cleanup from print_mention_exception by using
string_printf.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* ada-lang.c (print_mention_exception): Use std::string.
Tom Tromey [Thu, 3 May 2018 16:23:55 +0000 (10:23 -0600)]
Return std::string from ada_exception_catchpoint_cond_string
This changes ada_exception_catchpoint_cond_string to return a
std::string, allowing for the removal of a cleanup in
create_excep_cond_exprs.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* ada-lang.c (create_excep_cond_exprs): Update.
(ada_exception_catchpoint_cond_string): Use std::string.
Tom Tromey [Fri, 10 Nov 2017 21:39:31 +0000 (14:39 -0700)]
Remove cleanup from old_renaming_is_invisible
This removes a cleanup from ada-lang.c by changing xget_renaming_scope
to return a std::string.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* ada-lang.c (xget_renaming_scope): Return std::string.
(old_renaming_is_invisible): Update.
Tom Tromey [Fri, 4 May 2018 16:17:52 +0000 (10:17 -0600)]
Use gdb_bfd_ref_ptr in target_bfd
I noticed that target_bfd was using manual reference counting for the
BFD it held. This patch changes it to use gdb_bfd_ref_ptr instead.
Tested by the buildbot.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* bfd-target.c (target_bfd::m_bfd): Now a gdb_bfd_ref_ptr.
(target_bfd::target_bfd, target_bfd::~target_bfd): Update.
Ulrich Weigand [Fri, 4 May 2018 17:20:18 +0000 (19:20 +0200)]
[spu] Fix build break
gdb/ChangeLog:
2018-05-04 Ulrich Weigand <uweigand@de.ibm.com>
* spu-linux-nat.c (spu_linux_nat_target::wait): Fix syntax error.
Tom Tromey [Thu, 3 May 2018 06:04:11 +0000 (00:04 -0600)]
Remove a cleanup from remote.c
This removes a cleanup from remote.c by using std::string to construct
the qSupported packet.
Tested by the buildbot.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* remote.c (remote_query_supported_append): Change type.
(remote_check_symbols): Update.
Andrew Burgess [Sun, 8 Apr 2018 23:18:34 +0000 (00:18 +0100)]
gdb/testsuite: Handle targets with lots of registers
In gdb.base/maint.exp a test calls 'maint print registers'. If the
target has lots of registers this may overflow expect's buffers,
causing the test to fail.
After this commit we process the output line at a time until we get back
to the GDB prompt, this should prevent buffer overrun while still
testing that the command works as required.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Process output from 'maint print registers'
line at a time.
Paul Pluzhnikov [Fri, 4 May 2018 14:07:58 +0000 (10:07 -0400)]
configure uses incorrect link order when testing libpython
References:
https://stackoverflow.com/a/
49868387
https://sourceware.org/bugzilla/show_bug.cgi?id=11420
Configure uses "gcc -o conftest -g ... conftest.c -ldl -lncurses -lm -ldl
... -lpthread ... -lpython2.7" when deciding whether give libpython is
usable.
That of course is the wrong link order, and only works for shared libraries
(mostly by accident), and only on some systems.
gdb/ChangeLog:
PR gdb/11420
* configure.ac: Prepend libpython.
* python/python-config.py: Likewise.
* configure: Regenerate.
Andrew Burgess [Thu, 15 Mar 2018 19:41:50 +0000 (19:41 +0000)]
gdb/testsuite: Fix broken regexp in gdbstub case
When $use_gdb_stub is true then, when we start an MI target there's a
regexp to match GDB's startup pattern. Unfortunately the pattern is
broken, and we're also missing a timeout case in the match list (which
would have helped point out that the regexp was broken).
The changes to the regexp are:
1. Remove '${run_match}' prefix, the issued command doesn't include
'${run_prefix}' so expecting '${run_match}' is wrong.
2. Replaced '\\n' with '\\\\n' in order to match literal '\n' in
GDBs output (that is, match a backslash followed by 'n', not a
newline character).
3. Replaced a '.' (matching any character) with '\.' to match a '.'
and moved the '\.' into the correct place in the regexp.
4. Replaced '\r\n' with '[\r\n]+' to match the end of a line. This
change isn't esential, but matches the other end of line patterns
within this regexp.
Here's an example of the output that the regexp should match taken
from a testfile log, the first line is the command sent to GDB, and
the remaining lines are the response from GDB:
jump *_start
&"jump *_start\n"
~"Continuing at 0x10074.\n"
^running
*running,thread-id="all"
(gdb)
gdb/testsuite/ChangeLog:
* lib/mi-support.exp (mi_run_cmd_full): Fix regexp and add a
timeout.
Alan Modra [Fri, 27 Apr 2018 00:12:11 +0000 (09:42 +0930)]
-Wstringop-truncation warnings
This patch is aimed at silencing gcc8 -Wstringop-truncation warnings.
Unfortunately adding __attribute__ ((__nonstring)) doesn't work in a
number of the places patched here, (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85643) so if you have
recent glibc headers installed you'll need to configure binutils with
--disable-werror to compile using gcc8 or gcc9.
include/
* ansidecl.h: Import from gcc.
* coff/internal.h (struct internal_scnhdr): Add ATTRIBUTE_NONSTRING
to s_name.
(struct internal_syment): Add ATTRIBUTE_NONSTRING to _n_name.
bfd/
* elf-linux-core.h (struct elf_external_linux_prpsinfo32_ugid32),
(struct elf_external_linux_prpsinfo32_ugid16),
(struct elf_external_linux_prpsinfo64_ugid32),
(struct elf_external_linux_prpsinfo64_ugid16): Add ATTRIBUTE_NONSTRING
to pr_fname and pr_psargs fields. Remove GCC diagnostic pragmas.
Move comment to..
* elf.c (elfcore_write_prpsinfo): ..here. Indent nested preprocessor
directives.
* elf32-arm.c (elf32_arm_nabi_write_core_note): Add ATTRIBUTE_NONSTRING
to data.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Likewise.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
* elf64-x86-64.c (elf_x86_64_write_core_note): Add GCC diagnostic
pragmas.
* peXXigen.c (_bfd_XXi_swap_scnhdr_out): Use strnlen to avoid
false positive gcc-8 warning.
gas/
* config/obj-evax.c (shorten_identifier): Use memcpy in place
of strncpy.
* config/obj-macho.c (obj_mach_o_make_or_get_sect): Ensure
segname and sectname fields are NUL terminated.
Tulio Magno Quites Machado Filho [Wed, 2 May 2018 22:18:44 +0000 (19:18 -0300)]
ppc: Fix warning messages when IBM and IEEE long double are mixed
When IBM long double is used, the .gnu_attribute 4 is set to 1 | (1 *
4). IEEE long double sets the same .gnu_attribute to 1 | (3 * 4).
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Fix the order
of arguments when warning about different long double types.
Jim Wilson [Fri, 4 May 2018 00:25:31 +0000 (17:25 -0700)]
Fix typo in Makefile.am to make it agree with Makefile.in.
ld/
* Makefile.am (earmelfb_linux_fdpiceabi.c): Fix typo in dependencies.
GDB Administrator [Fri, 4 May 2018 00:00:30 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Thu, 3 May 2018 21:29:14 +0000 (17:29 -0400)]
Use flex's -t option instead of --stdout
As reported in
https://sourceware.org/ml/gdb-patches/2018-05/msg00042.html
some old versions of flex (2.5.4) don't support the --stdout switch.
Use -t, which is an alias.
gdb/ChangeLog:
* Makefile.in (%.c: %.l): Use -t instead of --stdout.
Andrew Burgess [Sun, 1 Apr 2018 21:02:33 +0000 (22:02 +0100)]
gdb/testsuite: Filter out some registers for riscv
On riscv the cycle counter, and instructions retired counter CSRs are
read only, this causes problems in the gdb.base/callfuncs.exp test, as
the values in these CSRs change after an inferior call, the check that
no target registers have been modified then fails.
Luckily the test already has a mechanism in place for filtering out
registers that are modified (and can't be restored) by an inferior call,
so this commit adds the problem registers into this list for riscv.
In the future we may end up needing to filter out more CSRs, but right
now, for the targets I have access too, these are the only ones causing
problems.
gdb/testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Add riscv register
filter pattern.
Simon Atanasyan [Thu, 3 May 2018 16:17:46 +0000 (17:17 +0100)]
BFD: Prevent writing the MIPS _gp_disp symbol into symbol tables
The _gp_disp is a magic symbol, always implicitly defined by the linker.
It does not make a sense to write it into symbol tables for output files.
Moreover, now if the linker gets a version script, the _gp_disp symbol
gets zero version definition index. The zero index means[1]:
"The symbol is local, not available outside the object."
But the _gp_disp symbol has GLOBAL binding. That confuses some tools
like for example the LLD linker when they get such files as inputs.
This patch fixes the problem - it prevents writing the _gp_disp symbol
in regular and dynamic symbol tables.
This was tested by running LD test suite on a mipsel-linux board.
References:
[1] "Linux Standard Base Specification", Section "10.7.2 Symbol
Version Table", p. 32
2018-05-03 Simon Atanasyan <simon@atanasyan.com>
bfd/
* elf32-mips.c: (elf32_mips_fixup_symbol): New function.
(elf_backend_fixup_symbol): New macro.
* elfxx-mips.c: (mips_elf_output_extsym): Discard _gp_disp
handling.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise.
ld/
* testsuite/ld-mips-elf/gp-disp-sym.d: New test.
* testsuite/ld-mips-elf/gp-disp-sym.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
* testsuite/ld-mips-elf/mips16-pic-2.ad: Update for _gp_disp
symbol removal.
* testsuite/ld-mips-elf/mips16-pic-2.nd: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32.got: Likewise.
Pedro Alves [Thu, 3 May 2018 10:31:38 +0000 (11:31 +0100)]
Fix s390 GNU/Linux build
- Fixes this compile error:
../../src/gdb/s390-linux-nat.c:125:8: error: ‘virtual bool s390_linux_nat_target::have_continuable_watchpoint()’ can be marked override [-Werror=suggest-override]
bool have_continuable_watchpoint () { return 1; }
^~~~~~~~~~~~~~~~~~~~~~~~~~~
s390 never implemented that hook. The declaration of the method got
there simply via copy/paste from some other target.
Return 'true' instead of '1' while at it.
- Fixes this link error:
s390-linux-nat.o:(.rodata._ZTV21s390_linux_nat_target[_ZTV21s390_linux_nat_target]+0x120): undefined reference to `s390_linux_nat_target::watchpoint_addr_within_range(unsigned long, unsigned long, int)'
gdb/ChangeLog:
2018-05-03 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c
(s390_linux_nat_target::have_continuable_watchpoint): Mark with
override. Write 'true' instead of '1'.
(s390_linux_nat_target::watchpoint_addr_within_range): Remove
declaration.
GDB Administrator [Thu, 3 May 2018 00:00:13 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Wed, 2 May 2018 23:37:32 +0000 (00:37 +0100)]
target factories, target open and multiple instances of targets
Currently, to open a target, with "target TARGET_NAME", GDB finds the
target_ops instance with "TARGET_NAME" as short name, and then calls
its target_ops::open virtual method. In reality, there's no actual
target/name lookup, a pointer to the target_ops object was associated
with the "target TARGET_NAME" command at add_target time (when GDB is
initialized), as the command's context.
This creates a chicken and egg situation. Consider the case of
wanting to open multiple remote connections. We want to be able to
have one remote target_ops instance per connection, but, if we're not
connected yet, so we don't yet have an instance to call target->open()
on...
This patch fixes this by separating out common info about a target_ops
to a separate structure (shortname, longname, doc), and changing the
add_target routine to take a reference to such an object instead of a
pointer to a target_ops, and a pointer to a factory function that is
responsible to open an instance of the corresponding target when the
user types "target TARGET_NAME".
-extern void add_target (struct target_ops *);
+extern void add_target (const target_info &info, target_open_ftype *func);
I.e. this factory function replaces the target_ops::open virtual
method.
For static/singleton targets, nothing changes, the target_open_ftype
function pushes the global target_ops instance on the target stack.
At target_close time, the connection is tor down, but the global
target_ops object remains live.
However, targets that support being open multiple times will make
their target_open_ftype routine allocate a new target_ops instance on
the heap [e.g., new remote_target()], and push that on the stack. At
target_close time, the new object is destroyed (by the
target_ops::close virtual method).
Both the core target and the remote targets will support being open
multiple times (others could/should too, but those were my stopping
point), but not in this patch yet. We need to get rid of more globals
first before that'd be useful.
Native targets are somewhat special, given find_default_run_target &
friends. Those routines also expect to return a target_ops pointer,
even before we've open the target. However, we'll never need more
than one instance of the native target, so we can assume/require that
native targets are global/simpletons, and have the backends register a
pointer to the native target_ops. Since all native targets inherit
inf_child_target, we can centralize that registration. See
add_inf_child_target, get_native_target/set_native_target and
find_default_run_target.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Use
add_inf_child_target.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Use
add_inf_child_target.
* aix-thread.c (aix_thread_target_info): New.
(aix_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Use
add_inf_child_target.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Use
add_inf_child_target.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Use
add_inf_child_target.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Use
add_inf_child_target.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Use
add_inf_child_target.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Use
add_inf_child_target.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Use
add_inf_child_target.
* arm-linux-nat.c (_initialize_arm_linux_nat): Use
add_inf_child_target.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Use
add_inf_child_target.
* bfd-target.c (target_bfd_target_info): New.
(target_bfd) <shortname, longname, doc>: Delete.
<info>: New.
* bsd-kvm.c (bsd_kvm_target_info): New.
(bsd_kvm_target) <shortname, longname, doc>: Delete.
<info>: New.
(bsd_kvm_target::open): Rename to ...
(bsd_kvm_target_open): ... this. Adjust.
* bsd-uthread.c (bsd_uthread_target_info): New.
(bsd_uthread_target) <shortname, longname, doc>: Delete.
<info>: New.
* corefile.c (core_file_command): Adjust.
* corelow.c (core_target_info): New.
(core_target) <shortname, longname, doc>: Delete.
<info>: New.
(core_target::open): Rename to ...
(core_target_open): ... this. Adjust.
* ctf.c (ctf_target_info): New.
(ctf_target) <shortname, longname, doc>: Delete.
<info>: New.
(ctf_target::open): Rename to ...
(ctf_target_open): ... this.
(_initialize_ctf): Adjust.
* exec.c (exec_target_info): New.
(exec_target) <shortname, longname, doc>: Delete.
<info>: New.
(exec_target::open): Rename to ...
(exec_target_open): ... this.
* gdbcore.h (core_target_open): Declare.
* go32-nat.c (_initialize_go32_nat): Use add_inf_child_target.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Use
add_inf_child_target.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Use
add_inf_child_target.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Use
add_inf_child_target.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Use
add_inf_child_target.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Use
add_inf_child_target.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Use
add_inf_child_target.
* i386-linux-nat.c (_initialize_i386_linux_nat): Use
add_inf_child_target.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Use
add_inf_child_target.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Use
add_inf_child_target.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Use
add_inf_child_target.
* inf-child.c (inf_child_target_info): New.
(inf_child_target::info): New.
(inf_child_open_target): Remove 'target' parameter. Use
get_native_target instead.
(inf_child_target::open): Delete.
(add_inf_child_target): New.
* inf-child.h (inf_child_target) <shortname, longname, doc, open>:
Delete.
<info>: New.
(add_inf_child_target): Declare.
(inf_child_open_target): Declare.
* linux-thread-db.c (thread_db_target_info): New.
(thread_db_target) <shortname, longname, doc>: Delete.
<info>: New.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Use
add_inf_child_target.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Use
add_inf_child_target.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Use
add_inf_child_target.
* m88k-bsd-nat.c (_initialize_m88kbsd_nat): Use
add_inf_child_target.
* make-target-delegates (print_class): Adjust.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Use
add_inf_child_target.
* mips-linux-nat.c (_initialize_mips_linux_nat): Use
add_inf_child_target.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Use
add_inf_child_target.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Use
add_inf_child_target.
* nto-procfs.c (nto_native_target_info): New.
(nto_procfs_target_native) <shortname, longname, doc>:
Delete.
<info>: New.
(nto_procfs_target_info): New.
(nto_procfs_target_procfs) <shortname, longname, doc>:
Delete.
<info>: New.
(init_procfs_targets): Adjust.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Use
add_inf_child_target.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Use
add_inf_child_target.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Use
add_inf_child_target.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Use
add_inf_child_target.
* ravenscar-thread.c (ravenscar_target_info): New.
(ravenscar_thread_target) <shortname, longname, doc>:
Delete.
<info>: New.
* record-btrace.c (record_btrace_target_info):
(record_btrace_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_btrace_target::open): Rename to ...
(record_btrace_target_open): ... this. Adjust.
* record-full.c (record_longname, record_doc): New.
(record_full_base_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_full_target_info): New.
(record_full_target): <shortname>: Delete.
<info>: New.
(record_full_core_open_1, record_full_open_1): Update comments.
(record_full_base_target::open): Rename to ...
(record_full_open): ... this.
(cmd_record_full_restore): Update.
(_initialize_record_full): Update.
* remote-sim.c (remote_sim_target_info): New.
(gdbsim_target) <shortname, longname, doc>: Delete.
<info>: New.
(gdbsim_target::open): Rename to ...
(gdbsim_target_open): ... this.
(_initialize_remote_sim): Adjust.
* remote.c (remote_doc): New.
(remote_target_info): New.
(remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(extended_remote_target_info): New.
(extended_remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(remote_target::open_1): Make static. Adjust.
* rs6000-nat.c (_initialize_rs6000_nat): Use add_inf_child_target.
* s390-linux-nat.c (_initialize_s390_nat): Use
add_inf_child_target.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Use
add_inf_child_target.
* sol-thread.c (thread_db_target_info): New.
(sol_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Use
add_inf_child_target.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Use
add_inf_child_target.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Use
add_inf_child_target.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Use
add_inf_child_target.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Use
add_inf_child_target.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Use
add_inf_child_target.
* spu-linux-nat.c (_initialize_spu_nat): Use
add_inf_child_target.
* spu-multiarch.c (spu_multiarch_target_info): New.
(spu_multiarch_target) <shortname, longname, doc>: Delete.
<info>: New.
* target-delegates.c: Regenerate.
* target.c: Include <unordered_map>.
(target_ops_p): Delete.
(DEF_VEC_P(target_ops_p)): Delete.
(target_factories): New.
(test_target_info): New.
(test_target_ops::info): New.
(open_target): Adjust to use target_factories.
(add_target_with_completer): Rename to ...
(add_target): ... this. Change prototype. Register target_info
and open callback in target_factories. Register target_info in
command context instead of target_ops.
(add_target): Delete old implementation.
(add_deprecated_target_alias): Change prototype. Adjust.
(the_native_target): New.
(set_native_target, get_native_target): New.
(find_default_run_target): Use the_native_target.
(find_attach_target, find_run_target): Simplify.
(target_ops::open): Delete.
(dummy_target_info): New.
(dummy_target::shortname, dummy_target::longname)
(dummy_target::doc): Delete.
(dummy_target::info): New.
(debug_target::shortname, debug_target::longname)
(debug_target::doc): Delete.
(debug_target::info): New.
* target.h (struct target_info): New.
(target_ops::~target_ops): Add comment.
(target_ops::info): New.
(target_ops::shortname, target_ops::longname, target_ops::doc): No
longer virtual. Implement in terms of target_info.
(set_native_target, get_native_target): Declare.
(target_open_ftype): New.
(add_target, add_target_with_completer)
(add_deprecated_target_alias): Change prototype.
(test_target) <shortname, longname, doc>: Delete.
<info>: New.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Use
add_inf_child_target.
* tracefile-tfile.c (tfile_target_info): New.
(tfile_target) <shortname, longname, doc>: Delete.
<info>: New.
(tfile_target::open): Rename to ...
(tfile_target_open): ... this.
(_initialize_tracefile_tfile): Adjust.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Use
add_inf_child_target.
* windows-nat.c (_initialize_windows_nat): Use
add_inf_child_target.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Use
add_inf_child_target.
Pedro Alves [Wed, 2 May 2018 23:37:27 +0000 (00:37 +0100)]
linux_nat_target: More low methods
This converts the remaining linux-nat.c hooks low_ methods like had
been started in a previous patch. The linux_nat_set_foo routines are
all gone with this.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* linux-nat.h (linux_nat_target) <low_new_thread,
low_delete_thread, low_new_fork, low_forget_process,
low_prepare_to_resume, low_siginfo_fixup, low_status_is_event>:
New virtual methods.
(linux_nat_set_new_thread, linux_nat_set_delete_thread)
(linux_nat_new_fork_ftype, linux_nat_set_new_fork)
(linux_nat_forget_process_ftype, linux_nat_set_forget_process)
(linux_nat_forget_process, linux_nat_set_siginfo_fixup)
(linux_nat_set_prepare_to_resume, linux_nat_set_status_is_event):
Delete.
* linux-fork.c (delete_fork): Adjust to call low method.
* linux-nat.c (linux_nat_new_thread, linux_nat_delete_thread)
(linux_nat_new_fork, linux_nat_forget_process_hook)
(linux_nat_prepare_to_resume, linux_nat_siginfo_fixup)
(linux_nat_status_is_event):
(linux_nat_target::follow_fork, lwp_free, add_lwp, detach_one_lwp)
(linux_resume_one_lwp_throw, linux_handle_extended_wait): Adjust
to call low method.
(sigtrap_is_event): Rename to ...
(linux_nat_target::low_status_is_event): ... this.
(linux_nat_set_status_is_event): Delete.
(save_stop_reason, linux_nat_wait_1)
(linux_nat_target::mourn_inferior, siginfo_fixup): Adjust to call
low methods.
(linux_nat_set_new_thread, linux_nat_set_delete_thread)
(linux_nat_set_new_fork, linux_nat_set_forget_process)
(linux_nat_forget_process, linux_nat_set_siginfo_fixup)
(linux_nat_set_prepare_to_resume): Delete.
* aarch64-linux-nat.c: All linux_nat_set_* callbacks converted to
low virtual methods.
* amd64-linux-nat.c: Likewise.
* arm-linux-nat.c: Likewise.
* i386-linux-nat.c: Likewise.
* ia64-linux-nat.c: Likewise.
* mips-linux-nat.c: Likewise.
* ppc-linux-nat.c: Likewise.
* s390-linux-nat.c: Likewise.
* sparc64-linux-nat.c: Likewise.
* x86-linux-nat.c: Likewise.
* x86-linux-nat.h: Include "nat/x86-linux.h".
(x86_linux_nat_target) <low_new_fork, low_forget_process,
low_prepare_to_resume, low_new_thread, low_delete_thread>:
Override methods.
Pedro Alves [Wed, 2 May 2018 23:37:26 +0000 (00:37 +0100)]
target_ops: Use bool throughout
After the previous target_ops/C++ patches are all squashed and merged,
this one can go in separately.
This patch adjusts all the target methods to return bool instead of int
when they're returning a boolean.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* target.h (target_ops)
<stopped_by_sw_breakpoint, supports_stopped_by_sw_breakpoint,
stopped_by_hw_breakpoint, supports_stopped_by_hw_breakpoint,
stopped_by_watchpoint, have_continuable_watchpoint,
stopped_data_address, watchpoint_addr_within_range,
can_accel_watchpoint_condition, can_run, thread_alive,
has_all_memory, has_memory, has_stack, has_registers,
has_execution, can_async_p, is_async_p, supports_non_stop,
always_non_stop_p, can_execute_reverse, supports_multi_process,
supports_enable_disable_tracepoint,
supports_disable_randomization, supports_string_tracing,
supports_evaluation_of_breakpoint_conditions,
can_run_breakpoint_commands, filesystem_is_local,
can_download_tracepoint, get_trace_state_variable_value,
set_trace_notes, get_tib_address, use_agent, can_use_agent,
record_is_replaying, record_will_replay,
augmented_libraries_svr4_read>: Adjust to return bool.
* aarch64-linux-nat.c: All implementations adjusted.
* aix-thread.c: All implementations adjusted.
* arm-linux-nat.c: All implementations adjusted.
* breakpoint.c: All implementations adjusted.
* bsd-kvm.c: All implementations adjusted.
* bsd-uthread.c: All implementations adjusted.
* corelow.c: All implementations adjusted.
* ctf.c: All implementations adjusted.
* darwin-nat.c: All implementations adjusted.
* darwin-nat.h: All implementations adjusted.
* exec.c: All implementations adjusted.
* fbsd-nat.c: All implementations adjusted.
* fbsd-nat.h: All implementations adjusted.
* gnu-nat.c: All implementations adjusted.
* gnu-nat.h: All implementations adjusted.
* go32-nat.c: All implementations adjusted.
* ia64-linux-nat.c: All implementations adjusted.
* inf-child.c: All implementations adjusted.
* inf-child.h: All implementations adjusted.
* inf-ptrace.c: All implementations adjusted.
* inf-ptrace.h: All implementations adjusted.
* linux-nat.c: All implementations adjusted.
* linux-nat.h: All implementations adjusted.
* mips-linux-nat.c: All implementations adjusted.
* nto-procfs.c: All implementations adjusted.
* ppc-linux-nat.c: All implementations adjusted.
* procfs.c: All implementations adjusted.
* ravenscar-thread.c: All implementations adjusted.
* record-btrace.c: All implementations adjusted.
* record-full.c: All implementations adjusted.
* remote-sim.c: All implementations adjusted.
* remote.c: All implementations adjusted.
* s390-linux-nat.c: All implementations adjusted.
* sol-thread.c: All implementations adjusted.
* spu-multiarch.c: All implementations adjusted.
* target-delegates.c: All implementations adjusted.
* target.c: All implementations adjusted.
* target.h: All implementations adjusted.
* tracefile-tfile.c: All implementations adjusted.
* tracefile.c: All implementations adjusted.
* tracefile.h: All implementations adjusted.
* windows-nat.c: All implementations adjusted.
* x86-linux-nat.h: All implementations adjusted.
* x86-nat.h: All implementations adjusted.
Pedro Alves [Wed, 2 May 2018 23:37:23 +0000 (00:37 +0100)]
make-target-delegates: line break between return type and function name
Before the target_ops C++ification, this wasn't necessary simply
because the methods were wrapped in ()'s, like
'(*to_my_long_method_name) (target_ops *)',
so
std::vector<long_type_name>(*to_my_long_method_name) ()TARGET_DEFAULT_IGNORE ()
still parsed correctly. With the (*) gone, we need this.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* make-target-delegates (scan_target_h): Don't trim lines here.
Replace sequences of tabs and/or whitespace with a single
whitespace.
(top level, parsing methods): Trim each line before processing it
here.
Pedro Alves [Wed, 2 May 2018 23:37:22 +0000 (00:37 +0100)]
Convert struct target_ops to C++
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
Pedro Alves [Wed, 2 May 2018 23:37:09 +0000 (00:37 +0100)]
Eliminate target_ops::to_xclose
In the multi-target branch, I found no need for the target_close vs
target_xclose distinction. Heap-allocated targets simply delete
themselves in their target_close implementation, while
singleton/static targets don't.
The target_ops C++ification patches will add more commentary around
target_ops's destructor, but there's no destructor yet...
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* bfd-target.c (target_bfd_xclose): Rename to ...
(target_bfd_close): ... this.
(target_bfd_reopen): Adjust.
* target.c (target_close): Remove references to to_xclose.
* target.h (target_ops::to_xclose): Delete.
(target_ops::to_close): Update comments.
Pedro Alves [Wed, 2 May 2018 23:37:08 +0000 (00:37 +0100)]
Make inf_ptrace_trad Linux-only, move to separate file
There are only two inf_ptrace_trad_target users, MIPS GNU/Linux and
Alpha GNU/Linux. They both call it via linux_trad_target.
Move this code out of inf-ptrace.c to a GNU/Linux-specific new file.
Making this code be GNU/Linux-specific simplifies C++ification of
target_ops, because we can make the trad target inherit linux_nat
instead of inheriting inf_ptrace. That'll be visible in a later patch.
Note this makes linux_target_install_ops an extern function, but that
is temporary -- the function will disappear once target_ops is made a
C++ class with virtual methods, later in the series. Also, I did not
rename the functions in the new file for a similar reason. They'll be
renamed again anyway in a couple of patches.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* alpha-linux-nat.c: Include "linux-nat-trad.h" instead of
"linux-nat.h".
* configure.nat (alpha-linux, linux-mips): Add linux-nat-trad.o.
* inf-ptrace.c (inf_ptrace_register_u_offset)
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers)
(inf_ptrace_trad_target): Move to ...
* linux-nat-trad.c: ... this new file.
* linux-nat-trad.h: New file.
* linux-nat.c (linux_target_install_ops): Make extern.
(linux_trad_target): Delete.
* linux-nat.h (linux_trad_target): Delete declaration.
(linux_target_install_ops): Declare.
* mips-linux-nat.c: Include "linux-nat-trad.h" instead of
"linux-nat.h".
Pedro Alves [Wed, 2 May 2018 23:37:07 +0000 (00:37 +0100)]
More procfs.c simplification
There are only two architectures using procfs.c (i386/SPARC), and none
of their corresponding nat files overrides any target method. Move
the add_target calls to procfs.c directly.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Don't call
procfs_target/add_target here.
* procfs.c (procfs_target): Make static.
(_initialize_procfs): Call add_target here.
* procfs.h (struct target_ops): Remove forward declaration.
(procfs_target): Remove declaration.
* sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Delete.
Pedro Alves [Wed, 2 May 2018 23:37:07 +0000 (00:37 +0100)]
Eliminate procfs.c:procfs_use_watchpoints
Now that procfs.c is only ever used by Solaris, and, both x86 and
SPARC Solaris support watchpoints (*), we don't need the separate
procfs_use_watchpoints function. Getting rid of it simplifies
C++ification of target_ops.
(*) and I assume that any other Solaris port would use the same kernel
debug API interfaces for watchpoints. Otherwise, we can worry about
it if it ever happens.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* procfs.c (procfs_stopped_by_watchpoint)
(procfs_insert_watchpoint, procfs_remove_watchpoint)
(procfs_region_ok_for_hw_watchpoint, procfs_stopped_data_address):
Forward declare.
(procfs_use_watchpoints): Delete, move contents...
(procfs_target): ... here.
* procfs.h (procfs_use_watchpoints): Delete declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Don't call
procfs_use_watchpoints.
* sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Don't call
procfs_use_watchpoints.
Tom Tromey [Wed, 2 May 2018 22:37:57 +0000 (16:37 -0600)]
Set test message in py-parameter.exp
Pedro pointed out that a test in py-parameter.exp had an empty
message. This fixes it.
testsuite/ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
* gdb.python/py-parameter.exp: Set test message.
Tom Tromey [Thu, 26 Apr 2018 22:18:07 +0000 (16:18 -0600)]
Handle var_zuinteger and var_zuinteger_unlimited from Python
PR python/20084 points out that the Python API doesn't handle the
var_zuinteger and var_zuinteger_unlimited parameter types.
This patch adds support for these types.
Regression tested on x86-64 Fedora 26.
ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
PR python/20084:
* python/python.c (gdbpy_parameter_value): Handle var_zuinteger
and var_zuinteger_unlimited.
* python/py-param.c (struct parm_constant): Add PARAM_ZUINTEGER
and PARAM_ZUINTEGER_UNLIMITED.
(set_parameter_value): Handle var_zuinteger and
var_zuinteger_unlimited.
(add_setshow_generic): Likewise.
(parmpy_init): Likewise.
doc/ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
PR python/20084:
* python.texi (Parameters In Python): Document PARAM_ZUINTEGER and
PARAM_ZUINTEGER_UNLIMITED.
testsuite/ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
PR python/20084:
* gdb.python/py-parameter.exp: Add PARAM_ZUINTEGER and
PARAM_ZUINTEGER_UNLIMITED tests.
GDB Administrator [Wed, 2 May 2018 00:00:37 +0000 (00:00 +0000)]
Automatic date update in version.in
Tamar Christina [Tue, 1 May 2018 16:11:11 +0000 (17:11 +0100)]
Fix unintialized memory in aarch64 opcodes.
This patch fixes an issue where the memory for the opcode structure is not zero'd before
the first exit branch. So there is one failure mode for which uninitialized memory
is returned.
This causes weird failures when the return code is not checked before inst is used.
opcodes/
* aarch64-dis.c (aarch64_opcode_decode): Moved memory clear code.
Nick Clifton [Tue, 1 May 2018 15:42:41 +0000 (16:42 +0100)]
Updated Spanish translation for the gas sub-directory.
Nick Clifton [Tue, 1 May 2018 15:35:04 +0000 (16:35 +0100)]
Bring in support for the NFP target in the config.sub file.
* config.guess: Synchronize with config project master sources.
* config.sub: Likewise.
Francois H. Theron [Tue, 1 May 2018 15:23:21 +0000 (16:23 +0100)]
Add the Netronome Flow Processor as a build target to the top-level configure.ac file.
* configure.ac: Added "nfp" target.
* configure: Regenerate.
Dan Robertson [Sat, 28 Apr 2018 03:18:00 +0000 (03:18 +0000)]
rust: Fix null deref when casting (PR 23124)
Fix a null dereference when casting a value to a unit type.
ChangeLog
2018-04-28 Dan Robertson <danlrobertson89@gmail.com>
PR rust/23124
* gdb/rust-exp.y (convert_params_to_types): Ensure that the params
pointer is not null before dereferencing it.
testsuite/ChangeLog
2018-04-28 Dan Robertson <danlrobertson89@gmail.com>
PR rust/23124
* gdb.rust/expr.exp: Test that the unit type is correctly parsed
when casting.
This page took 0.065235 seconds and 4 git commands to generate.