Jarkko Nikula [Mon, 26 Sep 2011 07:45:40 +0000 (10:45 +0300)]
ARM: OMAP: mcbsp: Make wakeup control generic
Currently wakeup control code is compiled only when CONFIG_ARCH_OMAP3 is
set even it should be available for CONFIG_ARCH_OMAP4 only builds also.
Fix this by making wakeup control generic so that it is executed whenever
new feature flag has_wakeup in platform data is set. Currently flag is set
for McBSP config types 3 and 4.
Remove also old comments about idle mode settings and HW bug workarounds
that were not updated during hwmod conversion.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Nikula [Mon, 26 Sep 2011 07:45:39 +0000 (10:45 +0300)]
ARM: OMAP: mcbsp: Implement generic register access
Register access can be made more generic by calculating register address
offsets runtime from common register definitions and by using reg_size and
reg_step variables that are passed via platform data. Common register
definitions are possible since McBSP registers are ordered similarly between
OMAP versions.
Remove also references to OMAP2+ specific config_type variable from generic
McBSP code since other variables and feature flags are better to carry needed
information from platform code.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Nikula [Mon, 26 Sep 2011 07:45:38 +0000 (10:45 +0300)]
ARM: OMAP: mcbsp: Move out omap_mcbsp_register_board_cfg from plat-omap/devices.c
Only OMAP1s are using omap_mcbsp_register_board_cfg after OMAP2+ hwmod
conversion so it can be moved to mach-omap1/mcbsp.c.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Nikula [Mon, 26 Sep 2011 07:45:37 +0000 (10:45 +0300)]
ARM: OMAP: mcbsp: Remove unused variables from platform data
These variables got unused after McBSP was converted to use resource
structures.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 22 Sep 2011 23:38:46 +0000 (16:38 -0700)]
Merge branch 'for_3.2/pm-cleanup' of git://gitorious.org/khilman/linux-omap-pm into cleanup
Tony Lindgren [Thu, 22 Sep 2011 23:38:39 +0000 (16:38 -0700)]
Merge branch 'for_3.2/omap_device' of git://gitorious.org/khilman/linux-omap-pm into cleanup
Kevin Hilman [Tue, 6 Sep 2011 20:04:10 +0000 (21:04 +0100)]
ARM: 7082/1: platform_device: pdev_archdata: add omap_device pointer
Add omap_device pointer to the ARM-specific arch data in the
platform_device. This will be used to attach OMAP-specific
device-data to the platform device with device lifetime.
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tony Lindgren [Tue, 20 Sep 2011 22:57:39 +0000 (15:57 -0700)]
ARM: OMAP2+: Fix missing inline functions for Makefile cleanup
Commit
f41caddbe73f52a42f529d668ce47b4d693fd2c0 (omap2+: Use
Kconfig symbol in Makefile instead of obj-y) cleaned up the
omap2+ Makefile. However this did not account for the inline
functions that are now needed for board_flash_init and
board_nand_init.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kevin Hilman [Tue, 13 Sep 2011 18:18:44 +0000 (11:18 -0700)]
OMAP3: PM: fix UART handling when using no_console_suspend
During the idle/suspend path, we expect the console lock to be held so
that no console output is done during/after the UARTs are idled.
However, when using the no_console_suspend argument on the
command-line, the console driver does not take the console lock. This
allows the possibility of console activity after UARTs have been
disabled.
To fix, update the current is_suspending() to also check the
console_suspend_enabled flag.
Reported-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Kevin Hilman [Thu, 21 Jul 2011 20:58:51 +0000 (13:58 -0700)]
OMAP: omap_device: decouple platform_device from omap_device
Rather than embedding a struct platform_device inside a struct
omap_device, decouple them, leaving only a pointer to the
platform_device inside the omap_device.
Use the arch-specific data field of the platform_device (pdev_archdata)
to add an omap_device pointer after the platform_device has been created.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Kevin Hilman [Mon, 1 Aug 2011 16:33:13 +0000 (09:33 -0700)]
OMAP: omap_device: _disable_idle_on_suspend() takes platform_device pointer
Public omap_device functions need to take platform_device pointers,
conversion to omap_device pointers is done internal to the omap_device
layer.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Kevin Hilman [Thu, 21 Jul 2011 21:47:53 +0000 (14:47 -0700)]
OMAP: omap_device: device register functions now take platform_device pointer
The internal device register functions do not need or use any omap_device
internals, so pass in a platform_device pointer instead of an omap_device
pointer.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Kevin Hilman [Thu, 21 Jul 2011 20:48:45 +0000 (13:48 -0700)]
OMAP: omap_device: when building return platform_device instead of omap_device
All of the device init and device driver interaction with omap_device
is done using platform_device pointers. To make this more explicit,
have omap_device return a platform_device pointer instead of an
omap_device pointer.
All current users of the omap_device pointer were only using it to get
at the platform_device pointer or struct device pointer, so fixing all
of the users was trivial.
This also makes it more difficult for device init code to directly
access members of struct omap_device, and allows for easier changing
of omap_device internals.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Kevin Hilman [Thu, 21 Jul 2011 21:14:35 +0000 (14:14 -0700)]
OMAP: omap_device: remove internal functions from omap_device.h
The *_device_register() functions and the count/fill resources functions
are internal to omap_device and do not need to be in the header.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Grazvydas Ignotas [Mon, 25 Jul 2011 13:18:24 +0000 (16:18 +0300)]
OMAP: omap_device: make latency autoadjust messages debug
During normal system operation warning messages similar to this
are appearing quite often:
omap_device: omap4-keypad.-1: new worst case activate latency 0: 61035
This doesn't seem to be reporting a problem, nor is it very useful for
non-developers, so reduce it to debug level.
Acked-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Kevin Hilman [Thu, 21 Jul 2011 16:58:36 +0000 (09:58 -0700)]
OMAP: omap_device: replace debug/warning/error prints with dev_* macros
For consistency in kernel printk output for devices, use dev_dbg(),
dev_warn(), dev_err() instead of pr_debug(), pr_warning() and
pr_err(), some of which currently use direct access of name from
platform_device and others of which use dev_name(). Using the dev_*
versions uses the standard device naming from the driver core.
Some pr_* prints were not converted with this patch since they are
used before the platform_device and struct device are created so
neither the dev_* prints or dev_name() is valid.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Jarkko Nikula [Fri, 1 Jul 2011 08:52:32 +0000 (08:52 +0000)]
omap: mcbsp: Remove omap device API
struct omap_device *od is only set with find_omap_device_by_dev but not used
otherwise so remove them and references to omap device API.
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tony Lindgren [Thu, 15 Sep 2011 23:06:11 +0000 (16:06 -0700)]
Merge branch 'omap_chip_remove_cleanup_3.2' of git://git.pwsan.com/linux-2.6 into cleanup
Paul Walmsley [Wed, 14 Sep 2011 23:23:39 +0000 (17:23 -0600)]
OMAP: id: remove OMAP_CHIP declarations, code
Now that all of the users of the OMAP_CHIP bitfield code have been converted
to use lists, the OMAP_CHIP code, data, and declarations can be removed.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Paul Walmsley [Wed, 14 Sep 2011 23:23:19 +0000 (17:23 -0600)]
OMAP2+: hwmod: remove OMAP_CHIP*
At Tony's request, remove the OMAP_CHIP* flags from the hwmod data, and
replace it instead with chip family, variant, and ES level-specific lists
of hwmods to register.
Thanks to Gražvydas Ignotas <notasas@gmail.com> for finding a bug in the
AM3517/3505 support, and for other review comments.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Gražvydas Ignotas <notasas@gmail.com>
Paul Walmsley [Wed, 14 Sep 2011 17:34:21 +0000 (11:34 -0600)]
OMAP: powerdomain: remove omap_chip bitmasks
At Tony's request, remove the omap_chip bitmasks from the powerdomain
definitions. Instead, initialize powerdomains based on one or more
lists that are applicable to a particular SoC family, variant, and
silicon revision.
Gražvydas Ignotas <notasas@gmail.com> found and reported a bug in a
related patch that also applied to this patch - thanks Gražvydas.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Gražvydas Ignotas <notasas@gmail.com>
Paul Walmsley [Wed, 14 Sep 2011 22:01:21 +0000 (16:01 -0600)]
OMAP: powerdomain: split pwrdm_init() into two functions
In preparation for OMAP_CHIP() removal, split pwrdm_init() into three
functions. This allows some of them to be called multiple times: for
example, pwrdm_register_pwrdms() can be called once to register
powerdomains that are common to a group of SoCs, and once to register
powerdomains that are specific to a single SoC.
The appropriate order to call these functions - which is enforced
by the code - is:
1. pwrdm_register_platform_funcs()
2. pwrdm_register_pwrdms() (can be called multiple times)
3. pwrdm_complete_init()
Convert the OMAP2, 3, and 4 powerdomain init code to use these new
functions.
While here, improve documentation, and increase CodingStyle
conformance by shortening some local variable names.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Paul Walmsley [Wed, 14 Sep 2011 22:01:21 +0000 (16:01 -0600)]
OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain
At Tony's request, remove the omap_chip bitmasks from the clockdomain
and clockdomain dependency definitions. Instead, initialize
clockdomains based on one or more lists that are applicable to a
particular SoC family, variant, and silicon revision.
Tony Lindgren <tony@atomide.com> found a bug in a previous version of this
patch - thanks Tony.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Wed, 14 Sep 2011 22:01:20 +0000 (16:01 -0600)]
OMAP: clockdomain: split clkdm_init()
In preparation for OMAP_CHIP() removal, split clkdm_init() into four
functions. This allows some of them to be called multiple times: for
example, clkdm_register_clkdms() can be called once to register
clockdomains that are common to a group of SoCs, and once to register
clockdomains that are specific to a single SoC.
The appropriate order to call these functions - which is enforced
by the code - is:
1. clkdm_register_platform_funcs()
2. clkdm_register_clkdms() (can be called multiple times)
3. clkdm_register_autodeps() (optional; deprecated)
4. clkdm_complete_init()
Convert the OMAP2, 3, and 4 clockdomain init code to use these new
functions.
While here, improve documentation, and increase CodingStyle
conformance by shortening some local variable names.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Paul Walmsley [Wed, 14 Sep 2011 01:52:15 +0000 (19:52 -0600)]
OMAP2+: id: remove OMAP_REVBITS_* macros
The OMAP_REVBITS_* macros are just used as otherwise meaningless
aliases for the numbers zero through five, so remove these macros.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
Paul Walmsley [Wed, 14 Sep 2011 01:52:15 +0000 (19:52 -0600)]
OMAP3: id: remove duplicate code for testing SoC ES level
omap3_cpuinfo() contains essentially duplicated code from
omap3_check_revision(), just for the purpose of determining the chip ES level.
Set the cpu_rev char array pointer in omap3_check_revision() instead,
and drop the now-useless code from omap3_cpuinfo().
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
Paul Walmsley [Wed, 14 Sep 2011 01:52:15 +0000 (19:52 -0600)]
OMAP3: id: add fallthrough warning; fix some CodingStyle issues
Emit a warning to the console in omap3_check_revision() if that code
cannot determine what type of SoC the system is currently running on.
Remove some extra whitespace, remove some duplicate code, and
add an appropriate comment to a fallthrough case.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Hemant Pedanekar <hemantp@ti.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
Paul Walmsley [Wed, 14 Sep 2011 01:52:14 +0000 (19:52 -0600)]
OMAP3: id: use explicit omap_revision codes for 3505/3517 ES levels
Use explicit revision codes for OMAP/AM 3505/3517 ES levels, as the rest
of the OMAP2+ SoCs do in mach-omap2/cpu.c.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Sanjeev Premi <premi@ti.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
Paul Walmsley [Wed, 14 Sep 2011 01:52:14 +0000 (19:52 -0600)]
OMAP3: id: remove useless strcpy()s
omap3_cpuinfo() is filled with useless strcpy() calls; remove them.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Sanjeev Premi <premi@ti.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
Paul Walmsley [Wed, 14 Sep 2011 01:52:13 +0000 (19:52 -0600)]
OMAP3: id: remove identification codes that only correspond to marketing names
The OMAP3505/AM3505 appears to be based on the same silicon as the
OMAP3517/AM3517, with some features disabled via eFuse bits. Follow
the same practice as OMAP3430 and identify these devices internally as
part of the OMAP3517/AM3517 family.
The OMAP3503/3515/3525/3530 chips appear to be based on the same silicon
as the OMAP3430, with some features disabled via eFuse bits. Identify
these devices internally as part of the OMAP3430 family.
Remove the old OMAP35XX_CLASS, which actually covered two very different
chip families. The OMAP3503/3515/3525/3530 chips will now be covered by
OMAP343X_CLASS, since the silicon appears to be identical. For the
OMAP3517/AM3517 family, create a new class, OMAP3517_CLASS.
Thanks to Tony Lindgren <tony@atomide.com> for some help with the second
revision of this patch.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Sanjeev Premi <premi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
Linus Torvalds [Mon, 12 Sep 2011 21:02:02 +0000 (14:02 -0700)]
Linux 3.1-rc6
Linus Torvalds [Mon, 12 Sep 2011 20:49:07 +0000 (13:49 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: Remove duplicate "return" statement
drm/nv04/crtc: Bail out if FB is not bound to crtc
drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs
drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate
drm/nouveau: fix oops on pre-semaphore hardware
drm/nv50/crtc: Bail out if FB is not bound to crtc
drm/radeon/kms: fix DP detect and EDID fetch for DP bridges
Linus Torvalds [Mon, 12 Sep 2011 18:51:35 +0000 (11:51 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-soc
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc:
ARM: CSR: add missing sentinels to of_device_id tables
ARM: cns3xxx: Fix newly introduced warnings in the PCIe code
ARM: cns3xxx: Fix compile error caused by hardware.h removed
ARM: davinci: fix cache flush build error
ARM: davinci: correct MDSTAT_STATE_MASK
ARM: davinci: da850 EVM: read mac address from SPI flash
OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers
OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[]
OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain
OMAP4: clock: fix compile warning
OMAP4: clock: re-enable previous clockdomain enable/disable sequence
OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup
OMAP: powerdomains: Make all powerdomain target states as ON at init
Mathieu Desnoyers [Sun, 11 Sep 2011 21:59:04 +0000 (17:59 -0400)]
ioctl: register LTTng ioctl
The LTTng 2.0 kernel tracer (stand-alone module package, available at
http://lttng.org) uses the 0xF6 ioctl range for tracer control and
transport operations.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 12 Sep 2011 18:47:49 +0000 (11:47 -0700)]
Merge branch 'for-linus' of git://github.com/chrismason/linux
* 'for-linus' of git://github.com/chrismason/linux:
Btrfs: add dummy extent if dst offset excceeds file end in
Btrfs: calc file extent num_bytes correctly in file clone
btrfs: xattr: fix attribute removal
Btrfs: fix wrong nbytes information of the inode
Btrfs: fix the file extent gap when doing direct IO
Btrfs: fix unclosed transaction handle in btrfs_cont_expand
Btrfs: fix misuse of trans block rsv
Btrfs: reset to appropriate block rsv after orphan operations
Btrfs: skip locking if searching the commit root in csum lookup
btrfs: fix warning in iput for bad-inode
Btrfs: fix an oops when deleting snapshots
Miklos Szeredi [Mon, 12 Sep 2011 07:38:03 +0000 (09:38 +0200)]
fuse: fix memory leak
kmemleak is reporting that 32 bytes are being leaked by FUSE:
unreferenced object 0xe373b270 (size 32):
comm "fusermount", pid 1207, jiffies
4294707026 (age 2675.187s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
b05517d7>] kmemleak_alloc+0x27/0x50
[<
b0196435>] kmem_cache_alloc+0xc5/0x180
[<
b02455be>] fuse_alloc_forget+0x1e/0x20
[<
b0245670>] fuse_alloc_inode+0xb0/0xd0
[<
b01b1a8c>] alloc_inode+0x1c/0x80
[<
b01b290f>] iget5_locked+0x8f/0x1a0
[<
b0246022>] fuse_iget+0x72/0x1a0
[<
b02461da>] fuse_get_root_inode+0x8a/0x90
[<
b02465cf>] fuse_fill_super+0x3ef/0x590
[<
b019e56f>] mount_nodev+0x3f/0x90
[<
b0244e95>] fuse_mount+0x15/0x20
[<
b019d1bc>] mount_fs+0x1c/0xc0
[<
b01b5811>] vfs_kern_mount+0x41/0x90
[<
b01b5af9>] do_kern_mount+0x39/0xd0
[<
b01b7585>] do_mount+0x2e5/0x660
[<
b01b7966>] sys_mount+0x66/0xa0
This leak report is consistent and happens once per boot on
3.1.0-rc5-dirty.
This happens if a FORGET request is queued after the fuse device was
released.
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miklos Szeredi [Mon, 12 Sep 2011 07:31:49 +0000 (09:31 +0200)]
fuse: fix flock breakage
Commit
37fb3a30b4 ("fuse: fix flock") added in 3.1-rc4 caused flock() to
fail with ENOSYS with the kernel ABI version 7.16 or earlier.
Fix by falling back to testing FUSE_POSIX_LOCKS for ABI versions 7.16
and earlier.
Reported-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Mon, 12 Sep 2011 18:30:22 +0000 (20:30 +0200)]
Merge branch 'for_3.1/pm-fixes-2' of git://gitorious.org/khilman/linux-omap-pm into fixes
Arnd Bergmann [Mon, 12 Sep 2011 14:59:37 +0000 (14:59 +0000)]
Merge branch 'sirf/fixes' into fixes
Linus Torvalds [Sun, 11 Sep 2011 21:58:47 +0000 (14:58 -0700)]
Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus:
[media] vp7045: fix buffer setup
[media] nuvoton-cir: simplify raw IR sample handling
[media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL
[media] v4l2: Fix documentation of the codec device controls
[media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240
[media] gspca - sonixj: Fix wrong register mask for sensor om6802
[media] gspca - ov519: Fix LED inversion of some ov519 webcams
[media] pwc: precedence bug in pwc_init_controls()
Linus Torvalds [Sun, 11 Sep 2011 21:55:43 +0000 (14:55 -0700)]
Merge branch 'for-linus' of git://openrisc.net/~jonas/linux
* 'for-linus' of git://openrisc.net/~jonas/linux:
Add missing DMA ops
openrisc: don't use pt_regs in struct sigcontext
Li Zefan [Sun, 11 Sep 2011 14:52:25 +0000 (10:52 -0400)]
Btrfs: add dummy extent if dst offset excceeds file end in
You can see there's no file extent with range [0, 4096]. Check this by
btrfsck:
# btrfsck /dev/sda7
root 5 inode 258 errors 100
...
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Li Zefan [Sun, 11 Sep 2011 14:52:25 +0000 (10:52 -0400)]
Btrfs: calc file extent num_bytes correctly in file clone
num_bytes should be 4096 not 12288.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
David Sterba [Sun, 11 Sep 2011 14:52:25 +0000 (10:52 -0400)]
btrfs: xattr: fix attribute removal
An attribute is not removed by 'setfattr -x attr file' and remains
visible in attr list. This makes xfstests/062 pass again.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Sun, 11 Sep 2011 14:52:25 +0000 (10:52 -0400)]
Btrfs: fix wrong nbytes information of the inode
If we write some data into the data hole of the file(no preallocation for this
hole), Btrfs will allocate some disk space, and update nbytes of the inode, but
the other element--disk_i_size needn't be updated. At this condition, we must
update inode metadata though disk_i_size is not changed(btrfs_ordered_update_i_size()
return 1).
# mkfs.btrfs /dev/sdb1
# mount /dev/sdb1 /mnt
# touch /mnt/a
# truncate -s 856002 /mnt/a
# dd if=/dev/zero of=/mnt/a bs=4K count=1 conv=nocreat,notrunc
# umount /mnt
# btrfsck /dev/sdb1
root 5 inode 257 errors 400
found 32768 bytes used err is 1
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: fix the file extent gap when doing direct IO
When we write some data to the place that is beyond the end of the file
in direct I/O mode, a data hole will be created. And Btrfs should insert
a file extent item that point to this hole into the fs tree. But unfortunately
Btrfs forgets doing it.
The following is a simple way to reproduce it:
# mkfs.btrfs /dev/sdc2
# mount /dev/sdc2 /test4
# touch /test4/a
# dd if=/dev/zero of=/test4/a seek=8 count=1 bs=4K oflag=direct conv=nocreat,notrunc
# umount /test4
# btrfsck /dev/sdc2
root 5 inode 257 errors 100
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: fix unclosed transaction handle in btrfs_cont_expand
The function - btrfs_cont_expand() forgot to close the transaction handle before
it jump out the while loop. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Liu Bo [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: fix misuse of trans block rsv
At the beginning of create_pending_snapshot, trans->block_rsv is set
to pending->block_rsv and is used for snapshot things, however, when
it is done, we do not recover it as will.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Liu Bo [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: reset to appropriate block rsv after orphan operations
While truncating free space cache, we forget to change trans->block_rsv
back to the original one, but leave it with the orphan_block_rsv, and
then with option inode_cache enable, it leads to countless warnings of
btrfs_alloc_free_block and btrfs_orphan_commit_root:
WARNING: at fs/btrfs/extent-tree.c:5711 btrfs_alloc_free_block+0x180/0x350 [btrfs]()
...
WARNING: at fs/btrfs/inode.c:2193 btrfs_orphan_commit_root+0xb0/0xc0 [btrfs]()
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: skip locking if searching the commit root in csum lookup
It's not enough to just search the commit root, since we could be cow'ing the
very block we need to search through, which would mean that its locked and we'll
still deadlock. So use path->skip_locking as well. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Sergei Trofimovich [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
btrfs: fix warning in iput for bad-inode
iput() shouldn't be called for inodes in I_NEW state.
We need to mark inode as constructed first.
WARNING: at fs/inode.c:1309 iput+0x20b/0x210()
Call Trace:
[<
ffffffff8103e7ba>] warn_slowpath_common+0x7a/0xb0
[<
ffffffff8103e805>] warn_slowpath_null+0x15/0x20
[<
ffffffff810eaf0b>] iput+0x20b/0x210
[<
ffffffff811b96fb>] btrfs_iget+0x1eb/0x4a0
[<
ffffffff811c3ad6>] btrfs_run_defrag_inodes+0x136/0x210
[<
ffffffff811ad55f>] cleaner_kthread+0x17f/0x1a0
[<
ffffffff81035b7d>] ? sub_preempt_count+0x9d/0xd0
[<
ffffffff811ad3e0>] ? transaction_kthread+0x280/0x280
[<
ffffffff8105af86>] kthread+0x96/0xa0
[<
ffffffff814336d4>] kernel_thread_helper+0x4/0x10
[<
ffffffff8105aef0>] ? kthread_worker_fn+0x190/0x190
[<
ffffffff814336d0>] ? gs_change+0xb/0xb
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Konstantin Khlebnikov <khlebnikov@openvz.org>
Tested-by: David Sterba <dsterba@suse.cz>
CC: Josef Bacik <josef@redhat.com>
CC: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Liu Bo [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: fix an oops when deleting snapshots
We can reproduce this oops via the following steps:
$ mkfs.btrfs /dev/sdb7
$ mount /dev/sdb7 /mnt/btrfs
$ for ((i=0; i<3; i++)); do btrfs sub snap /mnt/btrfs /mnt/btrfs/s_$i; done
$ rm -fr /mnt/btrfs/*
$ rm -fr /mnt/btrfs/*
then we'll get
------------[ cut here ]------------
kernel BUG at fs/btrfs/inode.c:2264!
[...]
Call Trace:
[<
ffffffffa05578c7>] btrfs_rmdir+0xf7/0x1b0 [btrfs]
[<
ffffffff81150b95>] vfs_rmdir+0xa5/0xf0
[<
ffffffff81153cc3>] do_rmdir+0x123/0x140
[<
ffffffff81145ac7>] ? fput+0x197/0x260
[<
ffffffff810aecff>] ? audit_syscall_entry+0x1bf/0x1f0
[<
ffffffff81153d0d>] sys_unlinkat+0x2d/0x40
[<
ffffffff8147896b>] system_call_fastpath+0x16/0x1b
RIP [<
ffffffffa054f7b9>] btrfs_orphan_add+0x179/0x1a0 [btrfs]
When it comes to btrfs_lookup_dentry, we may set a snapshot's inode->i_ino
to BTRFS_EMPTY_SUBVOL_DIR_OBJECTID instead of BTRFS_FIRST_FREE_OBJECTID,
while the snapshot's location.objectid remains unchanged.
However, btrfs_ino() does not take this into account, and returns a wrong ino,
and causes the oops.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Florian Mickler [Wed, 10 Aug 2011 10:05:20 +0000 (07:05 -0300)]
[media] vp7045: fix buffer setup
dvb_usb_device_init calls the frontend_attach method of this driver which
uses vp7045_usb_ob. In order to have a buffer ready in vp7045_usb_op, it has to
be allocated before that happens.
Luckily we can use the whole private data as the buffer as it gets separately
allocated on the heap via kzalloc in dvb_usb_device_init and is thus apt for
use via usb_control_msg.
This fixes a
BUG: unable to handle kernel paging request at
0000000000001e78
reported by Tino Keitel and diagnosed by Dan Carpenter.
Cc: stable@kernel.org # For v3.0 and upper
Tested-by: Tino Keitel <tino.keitel@tikei.de>
Signed-off-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Mon, 8 Aug 2011 20:20:40 +0000 (17:20 -0300)]
[media] nuvoton-cir: simplify raw IR sample handling
The nuvoton-cir driver was storing up consecutive pulse-pulse and
space-space samples internally, for no good reason, since
ir_raw_event_store_with_filter() already merges back to back like
samples types for us. This should also fix a regression introduced late
in 3.0 that related to a timeout change, which actually becomes correct
when coupled with this change. Tested with RC6 and RC5 on my own
nuvoton-cir hardware atop vanilla 3.0.0, after verifying quirky
behavior in 3.0 due to the timeout change.
Reported-by: Stephan Raue <sraue@openelec.tv>
CC: Stephan Raue <sraue@openelec.tv>
CC: stable@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jesper Juhl [Mon, 1 Aug 2011 21:39:17 +0000 (18:39 -0300)]
[media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL
In the unlikely case that pci_find_bus() should return NULL
viacam_serial_is_enabled() is going to dereference a NULL pointer and
blow up. Better safe than sorry, so be defensive and check the
pointer.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Kamil Debski [Tue, 2 Aug 2011 15:53:49 +0000 (12:53 -0300)]
[media] v4l2: Fix documentation of the codec device controls
Fixed missing ids of the codec controls description in the controls.xml file.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Tue, 9 Aug 2011 18:13:50 +0000 (15:13 -0300)]
[media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240
The images are clearer with a lower bridge clock.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Luiz Carlos Ramos [Tue, 9 Aug 2011 17:36:57 +0000 (14:36 -0300)]
[media] gspca - sonixj: Fix wrong register mask for sensor om6802
The bug was introduced by git commit
0e4d413af1a9d, giving very dark images.
Signed-off-by: Luiz Carlos Ramos <lramos.prof@yahoo.com.br>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Tue, 9 Aug 2011 08:28:17 +0000 (05:28 -0300)]
[media] gspca - ov519: Fix LED inversion of some ov519 webcams
The list of the webcams which have LED inversion was rebuild scanning
ms-win .inf files.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Sat, 23 Jul 2011 18:53:03 +0000 (15:53 -0300)]
[media] pwc: precedence bug in pwc_init_controls()
'!' has higher precedence than '&' so we need parenthesis here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonas Bonn [Mon, 5 Sep 2011 11:47:10 +0000 (13:47 +0200)]
Add missing DMA ops
For the initial architecture submission, not all of the DMA ops were
implemented. This patch adds the *map_page and *map_sg variants of the
DMA mapping ops.
This patch is currently of interest mainly to some drivers that haven't
been submitted upstream yet.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Jamie Iles [Mon, 1 Aug 2011 20:09:36 +0000 (21:09 +0100)]
ARM: CSR: add missing sentinels to of_device_id tables
The of_device_id tables used for matching should be terminated with
empty sentinel values.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Barry Song <baohua.song@csr.com>
Randy Dunlap [Sun, 11 Sep 2011 00:13:34 +0000 (17:13 -0700)]
scsi: qla4xxx driver depends on NET
When CONFIG_NET is disabled, SCSI_QLA_ISCSI selects SCSI_ISCSI_ATTRS,
which uses network interfaces, so the build fails with multiple errors:
warning: (ISCSI_TCP && SCSI_CXGB3_ISCSI && SCSI_CXGB4_ISCSI && SCSI_QLA_ISCSI && INFINIBAND_ISER) selects SCSI_ISCSI_ATTRS which has unmet direct dependencies (SCSI && NET)
ERROR: "skb_trim" [drivers/scsi/scsi_transport_iscsi.ko] undefined!
ERROR: "netlink_kernel_create" [drivers/scsi/scsi_transport_iscsi.ko] undefined!
ERROR: "netlink_kernel_release" [drivers/scsi/scsi_transport_iscsi.ko] undefined!
...
so make SCSI_QLA_ISCSI also depend on NET to prevent the build errors.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: iscsi-driver@qlogic.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Sep 2011 00:28:46 +0000 (17:28 -0700)]
Merge branch 'fixes' of ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abort
ARM: 7080/1: l2x0: make sure I&D are not locked down on init
ARM: 7081/1: mach-integrator: fix the clocksource
NET: am79c961: fix race in link status code
ARM: 7067/1: mm: keep significant bits in pfn_valid
Janusz Krzysztofik [Thu, 8 Sep 2011 17:45:40 +0000 (18:45 +0100)]
ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abort
Commit
be020f8618ca, "ARM: entry: abort-macro: specify registers to be
used for macros", while replacing register numbers with macro parameter
names, mismatched the name used for r1. For me, this resulted in user
space built for EABI with -march=armv4t -mtune=arm920t -mthumb-interwork
-mthumb broken on my OMAP1510 based Amstrad Delta (old ABI and no thumb
still worked for me though).
Fix this by using correct parameter name fsr instead of mismatched psr,
used by callers for another purpose.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Arnd Bergmann [Sat, 10 Sep 2011 21:20:25 +0000 (23:20 +0200)]
Merge branches 'cns3xxx/fixes', 'omap/fixes' and 'davinci/fixes' into fixes
Bart Van Assche [Sat, 10 Sep 2011 18:13:01 +0000 (20:13 +0200)]
backlight: Declare backlight_types[] const
Since backlight_types[] isn't modified, let's declare it const. That
was probably the intention of the author of commit
bb7ca747f8d6
("backlight: add backlight type"), via which the "const char const *"
construct was introduced. The duplicate const was detected by sparse.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 10 Sep 2011 17:19:15 +0000 (10:19 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.
md/raid1,10: Remove use-after-free bug in make_request.
md/raid10: unify handling of write completion.
Avoid dereferencing a 'request_queue' after last close.
NeilBrown [Sat, 10 Sep 2011 07:21:28 +0000 (17:21 +1000)]
md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.
0.90 metadata uses an unsigned 32bit number to count the number of
kilobytes used from each device.
This should allow up to 4TB per device.
However we multiply this by 2 (to get sectors) before casting to a
larger type, so sizes above 2TB get truncated.
Also we allow rdev->sectors to be larger than 4TB, so it is possible
for the array to be resized larger than the metadata can handle.
So make sure rdev->sectors never exceeds 4TB when 0.90 metadata is in
used.
Also the sanity check at the end of super_90_load should include level
1 as it used ->size too. (RAID0 and Linear don't use ->size at all).
Reported-by: Pim Zandbergen <P.Zandbergen@macroscoop.nl>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Sat, 10 Sep 2011 07:21:23 +0000 (17:21 +1000)]
md/raid1,10: Remove use-after-free bug in make_request.
A single request to RAID1 or RAID10 might result in multiple
requests if there are known bad blocks that need to be avoided.
To detect if we need to submit another write request we test:
if (sectors_handled < (bio->bi_size >> 9)) {
However this is after we call **_write_done() so the 'bio' no longer
belongs to us - the writes could have completed and the bio freed.
So move the **_write_done call until after the test against
bio->bi_size.
This addresses https://bugzilla.kernel.org/show_bug.cgi?id=41862
Reported-by: Bruno Wolff III <bruno@wolff.to>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Sat, 10 Sep 2011 07:21:17 +0000 (17:21 +1000)]
md/raid10: unify handling of write completion.
A write can complete at two different places:
1/ when the last member-device write completes, through
raid10_end_write_request
2/ in make_request() when we remove the initial bias from ->remaining.
These two should do exactly the same thing and the comment says they
do, but they don't.
So factor the correct code out into a function and call it in both
places. This makes the code much more similar to RAID1.
The difference is only significant if there is an error, and they
usually take a while, so it is unlikely that there will be an error
already when make_request is completing, so this is unlikely to cause
real problems.
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Sat, 10 Sep 2011 07:20:21 +0000 (17:20 +1000)]
Avoid dereferencing a 'request_queue' after last close.
On the last close of an 'md' device which as been stopped, the device
is destroyed and in particular the request_queue is freed. The free
is done in a separate thread so it might happen a short time later.
__blkdev_put calls bdev_inode_switch_bdi *after* ->release has been
called.
Since commit
f758eeabeb96f878c860e8f110f94ec8820822a9
bdev_inode_switch_bdi will dereference the 'old' bdi, which lives
inside a request_queue, to get a spin lock. This causes the last
close on an md device to sometime take a spin_lock which lives in
freed memory - which results in an oops.
So move the called to bdev_inode_switch_bdi before the call to
->release.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Jon Mason [Thu, 8 Sep 2011 21:41:18 +0000 (16:41 -0500)]
PCI: Remove MRRS modification from MPS setting code
Modifying the Maximum Read Request Size to 0 (value of 128Bytes) has
massive negative ramifications on some devices. Without knowing which
devices have this issue, do not modify from the default value when
walking the PCI-E bus in pcie_bus_safe mode. Also, make pcie_bus_safe
the default procedure.
Tested-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Simon Kirby <sim@hostway.ca>
Tested-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-and-tested-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
References: https://bugzilla.kernel.org/show_bug.cgi?id=42162
Signed-off-by: Jon Mason <mason@myri.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shyam Iyer [Thu, 8 Sep 2011 21:41:17 +0000 (16:41 -0500)]
Fix pointer dereference before call to pcie_bus_configure_settings
Commit
b03e7495a862 ("PCI: Set PCI-E Max Payload Size on fabric")
introduced a potential NULL pointer dereference in calls to
pcie_bus_configure_settings due to attempts to access pci_bus self
variables when the self pointer is NULL.
To correct this, verify that the self pointer in pci_bus is non-NULL
before dereferencing it.
Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Shyam Iyer <shyam_iyer@dell.com>
Signed-off-by: Jon Mason <mason@myri.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 9 Sep 2011 22:50:25 +0000 (15:50 -0700)]
Merge branch 'for-linus' of git://dev.laptop.org/users/cjb/mmc
* 'for-linus' of git://dev.laptop.org/users/cjb/mmc:
mmc: sdhci-s3c: Fix mmc card I/O problem
mmc: sd: UHS-I bus speed should be set last in UHS initialization
mmc: sdhi: initialise mmc_data->flags before use
mmc: core: use non-reentrant workqueue for clock gating
mmc: core: prevent aggressive clock gating racing with ios updates
mmc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}
mmc: sdhci-esdhc-imx: add missing inclusion of linux/module.h
Linus Torvalds [Fri, 9 Sep 2011 22:48:34 +0000 (15:48 -0700)]
Merge branch 'for-linus' of git://ceph.newdream.net/git/ceph-client
* 'for-linus' of git://ceph.newdream.net/git/ceph-client:
libceph: fix leak of osd structs during shutdown
ceph: fix memory leak
ceph: fix encoding of ino only (not relative) paths
libceph: fix msgpool
Miklos Szeredi [Mon, 5 Sep 2011 16:06:26 +0000 (18:06 +0200)]
vfs: automount should ignore LOOKUP_FOLLOW
Prior to 2.6.38 automount would not trigger on either stat(2) or
lstat(2) on the automount point.
After 2.6.38, with the introduction of the ->d_automount()
infrastructure, stat(2) and others would start triggering automount
while lstat(2), etc. still would not. This is a regression and a
userspace ABI change.
Problem originally reported here:
http://thread.gmane.org/gmane.linux.kernel.autofs/6098
It appears that there was an attempt at fixing various userspace tools
to not trigger the automount. But since the stat system call is
rather common it is impossible to "fix" all userspace.
This patch reverts the original behavior, which is to not trigger on
stat(2) and other symlink following syscalls.
[ It's not really clear what the right behavior is. Apparently Solaris
does the "automount on stat, leave alone on lstat". And some programs
can get unhappy when "stat+open+fstat" ends up giving a different
result from the fstat than from the initial stat.
But the change in 2.6.38 resulted in problems for some people, so
we're going back to old behavior. Maybe we can re-visit this
discussion at some future date - Linus ]
Reported-by: Leonardo Chiquitto <leonardo.lists@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Ian Kent <raven@themaw.net>
Cc: David Howells <dhowells@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton Vorontsov [Fri, 9 Sep 2011 19:18:00 +0000 (23:18 +0400)]
ARM: cns3xxx: Fix newly introduced warnings in the PCIe code
commit
d5341942d784134f2997b3ff82cd63cf71d1f932 ("PCI: Make the struct
pci_dev * argument of pci_fixup_irqs const") did not change argument
of pdev_to_cnspci(), and thus introduced the following warnings:
CHECK arch/arm/mach-cns3xxx/pcie.c
pcie.c:177:60: warning: incorrect type in argument 1 (different modifiers)
pcie.c:177:60: expected struct pci_dev *dev
pcie.c:177:60: got struct pci_dev const *dev
CC arch/arm/mach-cns3xxx/pcie.o
pcie.c: In function 'cns3xxx_pcie_map_irq':
pcie.c:177: warning: passing argument 1 of 'pdev_to_cnspci' discards qualifiers from pointer target type
pcie.c:52: note: expected 'struct pci_dev *' but argument is of type 'const struct pci_dev *'
This patch fixes the issue.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Tommy Lin [Thu, 28 Jul 2011 17:14:46 +0000 (01:14 +0800)]
ARM: cns3xxx: Fix compile error caused by hardware.h removed
Commit
c9d95fbe59e426eed7f16e7cac812e46ac4772d0 "ARM: convert PCI defines
to variables" deleted cns3xxx' hardware.h, but didn't remove references
for it, so do it now.
This patch removes lines that refer to hardware.h.
Signed-off-by: Tommy Lin <tommy.lin.1101@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Lin Ming [Wed, 7 Sep 2011 14:58:09 +0000 (22:58 +0800)]
drm: Remove duplicate "return" statement
Remove the duplicate "return" statement in drm_fb_helper_panic().
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 9 Sep 2011 08:10:04 +0000 (09:10 +0100)]
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-test
* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nv04/crtc: Bail out if FB is not bound to crtc
drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs
drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate
drm/nouveau: fix oops on pre-semaphore hardware
drm/nv50/crtc: Bail out if FB is not bound to crtc
Emil Velikov [Thu, 25 Aug 2011 20:36:51 +0000 (21:36 +0100)]
drm/nv04/crtc: Bail out if FB is not bound to crtc
This commit resolves a possible 'NULL pointer dereference'
It uses the same approach as radeon, intel and nouveau/nv50
Fixes bug 'Nouveau: Kernel oops when unplugging external monitor'
https://bugs.freedesktop.org/show_bug.cgi?id=40336
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Mon, 22 Aug 2011 21:22:13 +0000 (23:22 +0200)]
drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs
nv04_sgdma_bind binds the same page multiple times on
architectures where PAGE_SIZE != 4096.
Let's fix it.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Mon, 22 Aug 2011 21:14:05 +0000 (23:14 +0200)]
drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate
Not cleaning after alloc failure would result in crash on destroy,
because nouveau_sgdma_clear assumes "ttm_alloced" to be not null when
"pages" is not null.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 23 Aug 2011 00:23:11 +0000 (10:23 +1000)]
drm/nouveau: fix oops on pre-semaphore hardware
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Emil Velikov [Sun, 21 Aug 2011 21:48:12 +0000 (22:48 +0100)]
drm/nv50/crtc: Bail out if FB is not bound to crtc
Fixes possbile NULL pointer dereference
Resolves 'kernel crash in nv50_crtc_do_mode_set_base during shutdown'
https://bugs.freedesktop.org/show_bug.cgi?id=40005
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Linus Torvalds [Thu, 8 Sep 2011 23:49:32 +0000 (16:49 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine/ste_dma40: fix memory leak due to prepared descriptors
dmaengine/ste_dma40: fix Oops due to double free of client descriptor
dmaengine/ste_dma40: remove duplicate call to d40_pool_lli_free().
dmaengine/ste_dma40: add missing kernel doc for pending_queue
Linus Torvalds [Thu, 8 Sep 2011 23:47:52 +0000 (16:47 -0700)]
Merge branch 'for-linus' of git://opensource.wolfsonmicro.com/regmap
* 'for-linus' of git://opensource.wolfsonmicro.com/regmap:
regmap: Remove bitrotted module_put()s
Linus Torvalds [Thu, 8 Sep 2011 23:45:37 +0000 (16:45 -0700)]
Merge branch 'for-linus' of git://twin.jikos.cz/jikos/hid
* 'for-linus' of git://twin.jikos.cz/jikos/hid:
HID: wacom: Unregister sysfs attributes on remove
HID: wacom: Fix error path of power-supply initialization
HID: add support for HuiJia USB Gamepad connector
HID: magicmouse: ignore 'ivalid report id' while switching modes, v2
HID: magicmouse: Set resolution of touch surfaces
Linus Torvalds [Thu, 8 Sep 2011 23:42:34 +0000 (16:42 -0700)]
Merge branch 'for-31-rc5/i2c-fixes' of git://git.fluff.org/bjdooks/linux
* 'for-31-rc5/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
i2c-tegra: fix possible race condition after tx
i2c-tegra: add I2C_FUNC_SMBUS_EMUL
i2c-tegra: Add of_match_table
i2c-pxa2xx: return proper error code in ce4100_i2c_probe error paths
Linus Torvalds [Thu, 8 Sep 2011 23:39:47 +0000 (16:39 -0700)]
Merge branch 'amd/fixes' of git://git.8bytes.org/scm/iommu
* 'amd/fixes' of git://git.8bytes.org/scm/iommu:
iommu/amd: Don't take domain->lock recursivly
iommu/amd: Make sure iommu->need_sync contains correct value
Randy Dunlap [Thu, 8 Sep 2011 17:16:47 +0000 (10:16 -0700)]
regulator: fix kernel-doc warning in consumer.h
Fix kernel-doc warning about internal/private data by marking it
as "private:" so that kernel-doc will ignore it.
Warning(include/linux/regulator/consumer.h:128): No description found for parameter 'ret'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Thu, 8 Sep 2011 17:16:50 +0000 (10:16 -0700)]
wireless: fix kernel-doc warning in net/cfg80211.h
Fix kernel-doc warning in net/cfg80211.h:
Warning(include/net/cfg80211.h:1884): No description found for parameter 'registered'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 7 Sep 2011 20:03:48 +0000 (13:03 -0700)]
Merge branch 'timers-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
* 'timers-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
rtc: twl: Fix registration vs. init order
rtc: Initialized rtc_time->tm_isdst
rtc: Fix RTC PIE frequency limit
rtc: rtc-twl: Remove lockdep related local_irq_enable()
rtc: rtc-twl: Switch to using threaded irq
rtc: ep93xx: Fix 'rtc' may be used uninitialized warning
alarmtimers: Avoid possible denial of service with high freq periodic timers
alarmtimers: Memset itimerspec passed into alarm_timer_get
alarmtimers: Avoid possible null pointer traversal
Linus Torvalds [Wed, 7 Sep 2011 20:01:34 +0000 (13:01 -0700)]
Merge branch 'sched-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
* 'sched-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
sched: Fix a memory leak in __sdt_free()
sched: Move blk_schedule_flush_plug() out of __schedule()
sched: Separate the scheduler entry for preemption
Linus Torvalds [Wed, 7 Sep 2011 20:00:11 +0000 (13:00 -0700)]
Merge branch 'perf-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
* 'perf-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
x86, perf: Check that current->mm is alive before getting user callchain
perf_event: Fix broken calc_timer_values()
perf events: Fix slow and broken cgroup context switch code
Linus Torvalds [Wed, 7 Sep 2011 16:51:43 +0000 (09:51 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6 and git://git.infradead.org/ubi-2.6
* branch 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: not build debug messages with CONFIG_UBIFS_FS_DEBUG disabled
* branch 'linux-next' of git://git.infradead.org/ubi-2.6:
UBI: do not link debug messages when debugging is disabled
Linus Torvalds [Wed, 7 Sep 2011 15:11:43 +0000 (08:11 -0700)]
Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux
* 'hwmon-for-linus' of git://github.com/groeck/linux:
hwmon: (ucd9000/ucd9200) Optimize array walk
hwmon: (max16065) Add chip access warning to documentation
hwmon: (max16065) Fix current calculation
Linus Torvalds [Wed, 7 Sep 2011 14:48:00 +0000 (07:48 -0700)]
Merge branch 'for-linus' of git://github.com/ericvh/linux
* 'for-linus' of git://github.com/ericvh/linux:
fs/9p: Use protocol-defined value for lock/getlock 'type' field.
fs/9p: Always ask new inode in lookup for cache mode disabled
fs/9p: Add OS dependent open flags in 9p protocol
net/9p: Fix kernel crash with msize 512K
fs/9p: Don't update file type when updating file attributes
fs/9p: Add fid before dentry instantiation
Linus Torvalds [Wed, 7 Sep 2011 14:46:48 +0000 (07:46 -0700)]
Merge branch 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen
* 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen:
xen/smp: Warn user why they keel over - nosmp or noapic and what to use instead.
xen: x86_32: do not enable iterrupts when returning from exception in interrupt context
xen: use maximum reservation to limit amount of usable RAM
This page took 0.04989 seconds and 5 git commands to generate.