Nick Clifton [Sun, 21 Jun 1998 19:27:45 +0000 (19:27 +0000)]
Always perform alignment requests, even if they are deemed to be unnessasary.
Ron Unrau [Sun, 21 Jun 1998 15:31:09 +0000 (15:31 +0000)]
* symtab.c (find_line_pc): assumed that a PC of 0 is illegal.
Changed to pass PC as arg and return 1 if valid (0 otherwise).
symtab.h: change prototype to match
symtab.c (find_line_pc_range): use new interface
breakpoint.c (resolve_sal_pc): ditto
gdbtk.c (gdb_set_bp): ditto
Frank Ch. Eigler [Sat, 20 Jun 1998 09:21:44 +0000 (09:21 +0000)]
* Fix small typo.
Jeff Law [Sat, 20 Jun 1998 02:00:03 +0000 (02:00 +0000)]
* config/tc-mips.c (hilo_interlocks): Check mips_5900, not
mips_cpu == 5900.
Jeff Law [Fri, 19 Jun 1998 22:54:36 +0000 (22:54 +0000)]
* config/tc-mn10300.c (md_assemble): Handle FMT_D8 and FMT_D9
instruction formats. Handle MN10300_OPERAND_24BIT modifier.
(mn10300_insert_operand): Likewise.
(mn10300_check_operand): Likewise.
Jeff Law [Fri, 19 Jun 1998 22:50:44 +0000 (22:50 +0000)]
* gas/mn10300/am33_4.s: New test.
* gas/mn10300/am33_5.s: New test.
* gas/mn10300/basic.exp: Run them.
Jeff Law [Fri, 19 Jun 1998 22:49:43 +0000 (22:49 +0000)]
* m10300-opc.c: Support 6 and 7 byte am33 instructions.
Ian Lance Taylor [Fri, 19 Jun 1998 21:13:57 +0000 (21:13 +0000)]
* ld-scripts/weak.exp: New test.
* ld-scripts/weak.t: New file.
* ld-scripts/weak1.s: New file.
* ld-scripts/weak2.s: New file.
Ian Lance Taylor [Fri, 19 Jun 1998 21:11:47 +0000 (21:11 +0000)]
* elf32-mips.c (mips_elf_size_dynamic_sections): Only strip a
linker created empty input section if the output section has the
same name.
Ian Lance Taylor [Fri, 19 Jun 1998 21:10:39 +0000 (21:10 +0000)]
* elflink.h (elf_link_output_extsym): Print an error message if
_bfd_elf_section_from_bfd_section fails.
Ian Lance Taylor [Fri, 19 Jun 1998 21:10:20 +0000 (21:10 +0000)]
* elf.c (_bfd_elf_section_from_bfd_section): Call bfd_set_error on
failure.
Jillian Ye [Fri, 19 Jun 1998 20:26:23 +0000 (20:26 +0000)]
Remove the directory, all sky sim testcases are now in sim/sky/
Ian Lance Taylor [Fri, 19 Jun 1998 20:10:52 +0000 (20:10 +0000)]
Fri Jun 19 16:09:09 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* i386.h: Use FP, not sl_Suf, for fxsave and fxrstor.
Ian Lance Taylor [Fri, 19 Jun 1998 17:58:12 +0000 (17:58 +0000)]
* write.c (adjust_reloc_syms): Never adjust relocs against weak
symbols.
* config/tc-mips.c (md_apply_fix): Adjust accordingly.
Mark Alexander [Fri, 19 Jun 1998 16:19:12 +0000 (16:19 +0000)]
* m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
Joyce Janczyn [Fri, 19 Jun 1998 16:02:51 +0000 (16:02 +0000)]
Fri Jun 19 11:59:26 1998 Joyce Janczyn <janczyn@cygnus.com>
* interp.c (board): Rename am32 to stdeval1 as this is the name
consistently used to refer to the mn1030002 board.
Jeff Law [Fri, 19 Jun 1998 15:54:22 +0000 (15:54 +0000)]
start-sanitize-am33
* config/tc-mn10300.c (r_registers): Add missing registers.
(xr_registers): New set of registers.
(xr_register_name): New function.
(md_assemble): Handle XRREG and PLUS operands. Tweak handling of
RREG operand insertion. Handle new D6 and D7 instruction formats.
end-sanitize-am33
* config/tc-mn10300.c (mn10300_insert_operand): Do not hardcode the
shift amount for a repeated operand. The shift amount for the
repeated copy comes from the size of the operand.
Jeff Law [Fri, 19 Jun 1998 15:47:03 +0000 (15:47 +0000)]
* gas/mn10300/am33_2.s: New test.
* gas/mn10300/am33_3.s: New test.
* gas/mn10300/basic.exp: Run them.
Jeff Law [Fri, 19 Jun 1998 15:45:13 +0000 (15:45 +0000)]
* m10300-opc.c: Support for 3 byte and 4 byte extended instructions
found on the mn10300.
Jeff Law [Fri, 19 Jun 1998 15:41:58 +0000 (15:41 +0000)]
* mn10300.h (MN10300_OPERAND_XRREG): Define.
(MN10300_OPERAND_PLUS): Likewise.
(FMT_D6, FMT_D7): Likewise.
Ian Lance Taylor [Fri, 19 Jun 1998 14:43:45 +0000 (14:43 +0000)]
formatting fixes
Jeff Law [Fri, 19 Jun 1998 06:47:19 +0000 (06:47 +0000)]
* config/tc-h8300.c (get_operand): Fix typos in ldm/stm support.
Ulrich Drepper [Fri, 19 Jun 1998 01:58:48 +0000 (01:58 +0000)]
Update.
Ulrich Drepper [Fri, 19 Jun 1998 01:58:00 +0000 (01:58 +0000)]
Add support for fxsave, fxrstor, sysenter and sysexit.
John Metzler [Thu, 18 Jun 1998 22:47:43 +0000 (22:47 +0000)]
Fix compile errors in set_mips_isa_type
John Metzler [Thu, 18 Jun 1998 21:08:52 +0000 (21:08 +0000)]
*** empty log message ***
Jeff Law [Thu, 18 Jun 1998 19:14:20 +0000 (19:14 +0000)]
Rework ChangeLog entry to avoid mentioning vr5400 in a r5900 entry.
Jeff Law [Thu, 18 Jun 1998 19:12:41 +0000 (19:12 +0000)]
Remove reference to vr5400 inside a r5900 ChangeLog entry.
Joyce Janczyn [Thu, 18 Jun 1998 18:43:11 +0000 (18:43 +0000)]
Thu June 18 14:37:14 1998 Joyce Janczyn <janczyn@cygnus.com>
* interp.c (sim_open): Fix typo in address of EXTMD register
(0x34000280, not 0x3400280).
John Metzler [Thu, 18 Jun 1998 17:30:26 +0000 (17:30 +0000)]
* mips-dis.c (print_insn_little_mips): Previously, instruction
printing references the symbol table to determine whether the
instruction resides in a block regular instructions or mips16
instructions. However, when the disassembler gets used in other
environments where the symbol table is not present, we no longer
rely in the symbol table, rather, use the low bit of the
instructions address to guess. There should be no change for usage
of the disassembler in host based programse, gdb ,objdump.
(print_insn_big_mips): ditto.
(print_insn_mips): ditto
Ian Lance Taylor [Thu, 18 Jun 1998 16:20:45 +0000 (16:20 +0000)]
tipo
Frank Ch. Eigler [Thu, 18 Jun 1998 15:11:28 +0000 (15:11 +0000)]
* Adapt to changed R5900 SQC2 opcode.
Thu Jun 18 17:48:01 1998 Frank Ch. Eigler <fche@cygnus.com>
* mips.igen (SDC2): Removed R5900 alternative.
* r5900.igen (SQC2): Updated bit pattern to
match changed R5900 specs.
release [Thu, 18 Jun 1998 07:31:22 +0000 (07:31 +0000)]
fix sanitization typo
release [Thu, 18 Jun 1998 06:52:03 +0000 (06:52 +0000)]
fix sanitization; add t-ldl.s t-ldr.s t-lwl.s t-lwr.s t-sdr.s t-sub.s t-swl.s t-swr.s
release [Thu, 18 Jun 1998 06:27:54 +0000 (06:27 +0000)]
fix sanitization; add ax-gdb.c ax-gdb.h ax-general.c ax.h
release [Thu, 18 Jun 1998 02:14:08 +0000 (02:14 +0000)]
install tracing help files
Patrick Macdonald [Thu, 18 Jun 1998 00:28:06 +0000 (00:28 +0000)]
* second phase of the --sky-debug, --sky-debug-file stuff
* only outstanding issue is vu0/vu1 to file (phase 3_
* please see ChangeLog.sky for complete details
Jeff Law [Thu, 18 Jun 1998 00:17:18 +0000 (00:17 +0000)]
* gas/mn10300/am33.s: New test.
* gas/mn10300/basic.exp: Run it.
Jeff Law [Thu, 18 Jun 1998 00:12:44 +0000 (00:12 +0000)]
* config/tc-mn10300.c (r_registers): New register table.
(r_register_name): New function.
(md_assemble): Handle new am33 operand types.
Jeff Law [Thu, 18 Jun 1998 00:03:00 +0000 (00:03 +0000)]
* simops.c (syscall): Handle change in opcode # for syscall.
* mn10300.igen (syscall): Likewise.
Jeff Law [Wed, 17 Jun 1998 23:57:33 +0000 (23:57 +0000)]
* mn10300.h (MN10300_OPERAND_USP): Define.
(MN10300_OPERAND_SSP, MN10300_OPERAND_MSP): Likewise.
(MN10300_OPERAND_PC, MN10300_OPERAND_EPSW): Likewise.
(MN10300_OPERAND_RREG): Likewise.
Snapshot current work.
Jeff Law [Wed, 17 Jun 1998 23:54:25 +0000 (23:54 +0000)]
start-sanitize-am33
* m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
operands for the am33.
(mn10300_opcodes): Add new instructions from the am33.
end-sanitize-am33
* m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
Snapshot current work.
Ron Unrau [Wed, 17 Jun 1998 21:53:20 +0000 (21:53 +0000)]
* parse.c (target_map_name_to_register): Check target specific
aliases *first* so that it can over-ride architectural names
* txvu-tdep.c: start to handle backtraces
Said Ziouani [Wed, 17 Jun 1998 21:21:55 +0000 (21:21 +0000)]
* remote-sds.c (sds_start_remote): Fix printf call.
Ian Lance Taylor [Wed, 17 Jun 1998 17:07:54 +0000 (17:07 +0000)]
* config/tc-mips.c (md_show_usage): Fix -mipsN usage.
Patrick Macdonald [Wed, 17 Jun 1998 14:54:11 +0000 (14:54 +0000)]
* sky-pke.h: PKE_REG_SET_MASK / PKE_MEM_WRITE macros updated
to check/open the debug trace file
Frank Ch. Eigler [Wed, 17 Jun 1998 11:31:32 +0000 (11:31 +0000)]
* MIPS test suite changes that allow cross-assemblers to test MIPS dialects
other than their native tongues.
Wed Jun 17 14:02:10 1998 Frank Ch. Eigler <fche@cygnus.com>
* gas/mips/delay.d: Add -mcpu=NNNN to gas flags to let test case
run on differently targeted assembler.
* gas/mips/{ld-ilocks-addr32,ld-svr4pic.d}: Ditto.
* gas/mips/{ld-xgot.d,lif-svr4pic.d,lif-xgot.d}: Same.
* gas/mips/{mips16.d,mips4.d,nodelay.d}: Again.
* gas/mips/{trunc.d,uld.d,ulh-xgot.d,usd.d}: And then some.
* gas/mips/ld-ilocks.d: Removed disassembler flags to let target
defaults go unmodified. Replaced $f4/$f5 with $fp[45], as the
original `ld.d' had. Find `ld.s'.
* gas/mips/mul-ilocks.d: Nearly ditto.
Andrew Cagney [Wed, 17 Jun 1998 07:42:53 +0000 (07:42 +0000)]
Re-do sim-inline's handling of external functions and variables so
that there really is only one instance of them.
Mark Alexander [Tue, 16 Jun 1998 23:36:01 +0000 (23:36 +0000)]
* mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer
crash when in "start".
Jillian Ye [Tue, 16 Jun 1998 22:39:28 +0000 (22:39 +0000)]
*** empty log message ***
Patrick Macdonald [Tue, 16 Jun 1998 21:02:33 +0000 (21:02 +0000)]
* support for the --sky-debug, sky-debug-file options
* support for the --log, --log-file options
* GIF disassembly
* please view ChangeLog.Sky for details
Ron Unrau [Tue, 16 Jun 1998 20:38:10 +0000 (20:38 +0000)]
* dbxread.c: reset function_start_offset after a finishing N_FUN
is seen.
* remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override
target vectors as needed.
* txvu-tdep.c: add support for VIF breakpoints.
Ron Unrau [Tue, 16 Jun 1998 20:30:20 +0000 (20:30 +0000)]
* sky-pke.c(read_pke_pc): return source address of current pc
* sky-pke.c(read_pke_pcx): return index of current pc
* sky-pke.h: export read_pke_pcx
* interp.c(sim_fetch_registers): read pke pc/pcx
* sky-libvpe.c: track name change from GDB
* sim-main.h: add vif memory based pc
- extend gdb comm area for fifo breakpoints
- define SIM_ENGINE_RESTART_HOOK
* sky-gdb.c: add support for VIF breakpoints
Jillian Ye [Tue, 16 Jun 1998 19:47:31 +0000 (19:47 +0000)]
*** empty log message ***
Jim Ingham [Tue, 16 Jun 1998 19:36:47 +0000 (19:36 +0000)]
Mon Jun 15 13:18:21 1998 Jim Ingham <jingham@cygnus.com>
* gdbtk.c (gdbtk_init): Add elements to the auto_path AS LIST
ELEMENTS. This allows gdbtk to work when installed in a directory
which has a space in the path. D. Moseley pointed out the bug.
Frank Ch. Eigler [Tue, 16 Jun 1998 18:13:47 +0000 (18:13 +0000)]
* ECC (tx39) and sky changes.
[ChangeLog]
start-sanitize-tx3904
Tue Jun 16 14:39:00 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904tmr.c: Deschedule timer event after dispatching.
Reduce unnecessarily high timer event frequency.
* dv-tx3904cpu.c: Ditto for interrupt event.
end-sanitize-tx3904
start-sanitize-sky
Tue Jun 16 14:12:09 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Removed COP2 branches.
* r5900.igen: Moved COP2 branch instructions here.
* mips.igen: Restricted COPz == COP2 bit pattern to
exclude COP2 branches.
end-sanitize-sky
James Lemke [Tue, 16 Jun 1998 18:13:46 +0000 (18:13 +0000)]
Fix unresolved external error for sky_cpcond0 on non-SKY builds.
Ian Lance Taylor [Tue, 16 Jun 1998 17:11:47 +0000 (17:11 +0000)]
Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* i386-dis.c (index16): Add '%' to register names. Use ','
instead of '+'.
Ian Lance Taylor [Tue, 16 Jun 1998 17:10:17 +0000 (17:10 +0000)]
Tue Jun 16 13:06:21 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* app.c (do_scrub_begin): If tc_symbol_chars is defined, treat all
characters in it as LEX_IS_SYMBOL_COMPONENT.
* config/tc-i386.h (tc_symbol_chars): Define.
(extra_symbol_chars): Declare.
* config/tc-i386.c (extra_symbol_chars): Define.
(comment_chars): Don't use '/' as comment start if TE_LINUX.
(line_comment_chars): Set to '/' if TE_LINUX.
* doc/c-i386.texi (i386-prefixes): Update.
* doc/internals.texi (CPU backend): Document tc_symbol_chars.
Frank Ch. Eigler [Tue, 16 Jun 1998 16:53:49 +0000 (16:53 +0000)]
* sky testsuite fixes
Tue Jun 16 09:03:37 1998 Frank Ch. Eigler <fche@cygnus.com>
* t-cop2.s: Reorder instruction blocks to prevent "Out of bounds"
messages during test execution. Added dummy branch labels for BC2*
instructions.
* t-cop2.brn: Use --sky-debug option instead of env var.
* t-cop2.vuexpect: Updated for with new disassembly format.
* sky_sce_fast.exp: Don't compare GIF outputs for
--float-type=fast.
* sce_test{17,33,49}.dvpasm: Use ".DmaPackVif 1" option to
exercise assembler / PKE.
* rw-vureg.c: Cast memcpy operand to allay warning.
Doug Evans [Tue, 16 Jun 1998 16:53:48 +0000 (16:53 +0000)]
cangelog entries moved here from sim/sky/ChangeLog
Ian Carmichael [Tue, 16 Jun 1998 16:02:04 +0000 (16:02 +0000)]
* Implement remaining bits in VPU_STAT, CMSAR0, CMSAR1, FBRST. Fix COP2 interface
* to VI registers (CFC2/CTC2).
*
* Modified Files:
* ChangeLog.sky interp.c sim-main.c sky-pke.h sky-vu.c sky-vu.h
Joyce Janczyn [Tue, 16 Jun 1998 13:43:34 +0000 (13:43 +0000)]
Tue June 16 09:36:21 1998 Joyce Janczyn <janczyn@cygnus.com>
* dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or
reset) are not enabled on reset.
Frank Ch. Eigler [Tue, 16 Jun 1998 08:30:47 +0000 (08:30 +0000)]
* PR 15693 fix.
Wed Jun 10 18:04:35 1998 Frank Ch. Eigler <fche@cygnus.com>
* gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
all-positive enum.
(create_set_type): Ditto for all-positive set values.
* values.c (unpack_field_as_long): Check for typedef in struct
field unpacking.
James Lemke [Mon, 15 Jun 1998 17:36:23 +0000 (17:36 +0000)]
Implement CPCOND0 and insns BC0F/BC0FL/BC0T/BC0TL.
Joyce Janczyn [Sun, 14 Jun 1998 21:19:53 +0000 (21:19 +0000)]
Updates to dv-mn103iop.c, dv-mn103ser.c and inter.c
Ron Unrau [Sun, 14 Jun 1998 17:01:02 +0000 (17:01 +0000)]
* sky-engine.c: Set ordering of device issues to match enumerated type
txvu_cpu_context (sim-main.h tm-txvu.h). This also allowed the issue
structure to be simplified to an array of functions.
Ron Unrau [Sun, 14 Jun 1998 14:49:12 +0000 (14:49 +0000)]
*** empty log message ***
Ron Unrau [Sun, 14 Jun 1998 14:48:27 +0000 (14:48 +0000)]
* partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass
CUR_SYMBOL_VALUE as CORE_ADDR instead of long
* buildsym.[ch]: export pending_blocks list
* tm-txvu.h: define TARGET_READ_SP and TARGET_WRITE_SP
* txvu-tdep.c: rewrite symtabs to support N_FUN symbols in overlays.
(Actually, the last version did this for N_SLINE symbols).
(txvu_read_sp,txvu_write_sp): new
Dawn Perchik [Sat, 13 Jun 1998 20:06:13 +0000 (20:06 +0000)]
* remote.c : Fix remote help string to match that of help.exp.
Ian Lance Taylor [Sat, 13 Jun 1998 15:38:32 +0000 (15:38 +0000)]
Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* i386-dis.c: Don't print opcode suffix when we can figure out the
size (and gas can!) by register operands, or from the default
size.
(putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
macro to 'E'.
(dis386, dis386_twobyte, grps): Use new suffix macros.
(dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
order of cmps operands to agree with Intel docs. Correct operand
of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
agree with Intel docs.
(print_insn_x86): Print orphan fwait before other prefixes.
Return correct byte count for orphan fwait with prefixes. Don't
print `bound' operands in reverse order.
(ckprefix): Stop accumulating prefixes if we get fwait.
(OP_DIR): Print `$' before Ap operands of ljmp, lcall.
Ian Lance Taylor [Sat, 13 Jun 1998 15:33:23 +0000 (15:33 +0000)]
Sat Jun 13 11:31:35 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* i386.h (i386_optab): Add general form of aad and aam. Add ud2a
and ud2b.
(i386_regtab): Allow cr0..7, db0..7, dr0..7, tr0..7, not just
those that happen to be implemented on pentiums.
Ian Lance Taylor [Sat, 13 Jun 1998 15:15:13 +0000 (15:15 +0000)]
add d30v sanitization to readelf
Doug Evans [Sat, 13 Jun 1998 14:56:28 +0000 (14:56 +0000)]
* m32r-sim.h (M32R_MISC_PROFILE): New members insn_cycles, cti_stall,
load_stall,biggest_cycles.
* m32r.c (m32r_model_mark_get_h_gr): Update.
(m32r_model_init_insn_cycles,m32r_model_update_insn_cycles): New fns.
(m32r_model_record_cti,m32r_model_record_cycles): New functions.
* mloop.in: Call cycle init/update fns.
* model.c: Regenerate.
* m32rx.c (m32rx_model_mark_get_h_gr): Update.
* mloopx.in: Call cycle init/update fns.
* modelx.c: Regenerate.
Doug Evans [Sat, 13 Jun 1998 14:47:51 +0000 (14:47 +0000)]
* cgen-trace.c (trace_insn_fini): Redo cycle handling.
* sim-profile.h (PROFILE_DATA): Rename cycle handling members.
* sim-profile.c (profile_print_model): Update.
Doug Evans [Sat, 13 Jun 1998 05:38:21 +0000 (05:38 +0000)]
emulparams/m32relf.sh: Back out INPUT_FILES change. libgcc1-test fails.
Doug Evans [Sat, 13 Jun 1998 01:39:44 +0000 (01:39 +0000)]
* gennltvals.def (m32r): Use common syscall.h now.
(mn10300): Add entry.
* nltvals.def: Regenerate.
Doug Evans [Sat, 13 Jun 1998 00:53:24 +0000 (00:53 +0000)]
* scripttempl/elf.sc (INPUT_FILES): Optional INPUT spec.
* emulparams/m32relf.sh (INPUT_FILES): Define.
(OTHER_RELOCATING_SECTIONS): Change top of stack to 8MB.
Ian Lance Taylor [Fri, 12 Jun 1998 23:41:52 +0000 (23:41 +0000)]
rebuild
Ian Lance Taylor [Fri, 12 Jun 1998 23:36:05 +0000 (23:36 +0000)]
* Makefile.am (HFILES): Remove config.h.
(EMULATION_OFILES, POTFILES): Move patch of May 14 from
Makefile.in to Makefile.am.
(earmcoff.c): Depend upon armcoff.em, not generic.em.
* po/Make-in (all-yes): Correct misspelling in $(PACKAGE).
($(srcdir)/$(PACKAGE).pot): Pass -C to $(XGETTEXT).
* Makefile.in, po/POTFILES.in, po/ld.pot: Rebuild.
Ian Lance Taylor [Fri, 12 Jun 1998 23:13:41 +0000 (23:13 +0000)]
rebuild
Tom Tromey [Fri, 12 Jun 1998 22:39:34 +0000 (22:39 +0000)]
* po/Make-in (all-yes): If maintainer mode, depend on .pot file.
($(PACKAGE).pot): Unconditionally depend on POTFILES.
Tom Tromey [Fri, 12 Jun 1998 22:32:29 +0000 (22:32 +0000)]
* po/Make-in (all-yes): If maintainer mode, depend on .pot file.
($(PACKAGE).pot): Unconditionally depend on POTFILES.
Tom Tromey [Fri, 12 Jun 1998 22:25:09 +0000 (22:25 +0000)]
* po/Make-in (all-yes): If maintainer mode, depend on .pot file.
($(PACKAGE).pot): Unconditionally depend on POTFILES.
Jason Molenda [Fri, 12 Jun 1998 21:23:44 +0000 (21:23 +0000)]
Fri Jun 12 14:22:55 1998 Jason Molenda (crash@bugshack.cygnus.com)
* configure.in (LIBS): Add -lw to the list of libraries if needed.
-lw needed on Solaris to get wctype(). wctype() needed by new gnu-regex.c.
Syd Polk [Fri, 12 Jun 1998 21:04:33 +0000 (21:04 +0000)]
Fri Jun 12 14:03:34 1998 Syd Polk <spolk@cygnus.com>
* Makefile.in: all-snavigator needs all-libgui.
Michael Meissner [Fri, 12 Jun 1998 21:00:00 +0000 (21:00 +0000)]
Make sure .gcc_except_table fits in the section header table
Michael Meissner [Fri, 12 Jun 1998 20:50:03 +0000 (20:50 +0000)]
Add PowerPC support to readelf; Print machine specific flags; Print endianess; Make widening more portable
Joyce Janczyn [Fri, 12 Jun 1998 20:46:23 +0000 (20:46 +0000)]
Fri June 12 16:24:00 1998 Joyce Janczyn <janczyn@cygnus.com>
* dv-mn103iop.c: New file for handling am32 io ports.
* configure.in: Add mn103iop to hw_device list.
* configure: Re-generate.
* interp.c (sim_open): Create io port device.
Doug Evans [Fri, 12 Jun 1998 20:37:40 +0000 (20:37 +0000)]
* elf.c (swap_out_syms): New arg relocatable_p.
Don't add section VMA to symbols for relocatable output.
(_bfd_elf_compute_section_file_positions): Update call to
swap_out_syms.
Joyce Janczyn [Fri, 12 Jun 1998 20:15:43 +0000 (20:15 +0000)]
Add dv-mn103iop.
Doug Evans [Fri, 12 Jun 1998 20:08:50 +0000 (20:08 +0000)]
* sim-engine.c (sim_engine_get_run_state): New function.
* sim-engine.h (sim_engine_get_run_state): Declare it.
Joyce Janczyn [Fri, 12 Jun 1998 20:07:33 +0000 (20:07 +0000)]
New file for handling mn1030002 io ports.
Joyce Janczyn [Fri, 12 Jun 1998 20:05:08 +0000 (20:05 +0000)]
Add dv-mn103iop.c to list of files to sanitize out.
Vladimir Makarov [Fri, 12 Jun 1998 19:54:28 +0000 (19:54 +0000)]
PR15067
Doug Evans [Fri, 12 Jun 1998 19:49:54 +0000 (19:49 +0000)]
* config/tc-dvp.c (create_vuoverlay_section): Don't set a non-zero
section vma.
Vladimir Makarov [Fri, 12 Jun 1998 19:42:17 +0000 (19:42 +0000)]
PR15067
Patrick Macdonald [Fri, 12 Jun 1998 18:58:26 +0000 (18:58 +0000)]
* interp.c: added call to sky_command_options_end() to close
any open file handles before exiting
* sky-gpuif.[c|h]: add disassembly on the fly code, log and log
file option support
* sky-gdb.[c|h] (sky_command_options_close()): new function, added
some body to the log and log file option sections
Ian Lance Taylor [Fri, 12 Jun 1998 15:13:28 +0000 (15:13 +0000)]
Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
Fix problems when bfd_vma is wider than long.
* i386-dis.c: Make op_address and start_pc unsigned.
(set_op): Make parameter unsigned.
(print_insn_x86): Cast to bfd_vma when passing a value to
print_address_func.
* ns32k-dis.c (CORE_ADDR): Don't define.
(print_insn_ns32k): Change type of addr to bfd_vma. Use
bfd_scan_vma to read back address.
(print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
to format it.
* m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
(NEXTULONG): New definition.
(print_insn_m68k): Avoid overflow when computing third argument of
print_insn_arg.
(print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
Use disp instead of val to store offset values.
(print_indexed): Use base_disp instead of word to store base
displacement, to avoid overflow.
* m10300-dis.c (disassemble): Cast value to long when computing
pc-relative address, to get correct sign extension.
Doug Evans [Fri, 12 Jun 1998 06:40:41 +0000 (06:40 +0000)]
* Makefile.in (stamp-{arch,cpu,decode}): Pass CGEN_FLAGS_TO_PASS
to recursive makes.
(stamp-{xcpu,xdecode}): Ditto.
This page took 0.039899 seconds and 4 git commands to generate.