Cho, Yu-Chen [Thu, 7 Jul 2011 03:27:14 +0000 (11:27 +0800)]
Staging: Remove ENE UB6250 MS card codes from keucr
Remove ENE UB6250 MS card codes from keucr.
Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cho, Yu-Chen [Thu, 7 Jul 2011 03:27:13 +0000 (11:27 +0800)]
Staging: Merge ENE UB6250 MS card codes from keucr to drivers/usb/storage/ene_ub6250.c
Merge ENE UB6250 MS card codes from keucr to drivers/usb/storage/ene_ub6250.c.
Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bryan Freed [Thu, 7 Jul 2011 19:01:56 +0000 (12:01 -0700)]
staging:iio:light:isl29018: Convert some of the isl29018 driver to the new iio_chan_spec framework.
Remove the driver's get_sensor_data() interfaces and replace them with
iio_chan_spec channels. This converts 4 files to the new framework.
Driver ABI change: The intensity_infrared_raw file is now intensity_ir_raw.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bryan Freed [Thu, 7 Jul 2011 19:01:55 +0000 (12:01 -0700)]
staging:iio: Add an iio channel type string to support proximity sensors.
Add "proximity" to the iio_chan_type_name_spec_shared string list to
support proximity sensors.
Now this list fully matches the declared iio_chan_type enums.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bryan Freed [Thu, 7 Jul 2011 19:01:54 +0000 (12:01 -0700)]
staging:iio: Reorder channel type strings to match the iio.h enums.
This makes comparison between the iio_chan_type_name_spec_shared strings
and the iio_chan_type enums easier.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bryan Freed [Thu, 7 Jul 2011 19:01:57 +0000 (12:01 -0700)]
staging:iio:light:isl29018: Fix the "Init of isl29018 fails" failure.
The I2C clientdata is set to indio_dev instead of chip as of a couple weeks ago.
Correct the calls to i2c_get_clientdata() accordingly.
Otherwise the driver fails to initialize.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ravishankar [Fri, 8 Jul 2011 07:44:45 +0000 (13:14 +0530)]
Staging: comedi: fix printk issue in rtd520.c
This is a patch to the rtd520.c file that fixes up a printk warning found by the checkpatch.pl tool
Signed-off-by: Ravishankr <ravishakarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ravishankar [Fri, 8 Jul 2011 11:08:31 +0000 (16:38 +0530)]
Staging: comedi: fix line over 80 character issue in rtd520.c
This is a patch to the rtd520.c file that fixes up a warning: line over 80 character found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Fri, 8 Jul 2011 09:03:44 +0000 (11:03 +0200)]
staging: brcm80211: Fix module parameter permissions
The third parameter of module_param is supposed to represent sysfs
file permissions. A value of "1" makes no sense.
I am changing it to "0" to align with the other module parameters in
this driver.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Fri, 8 Jul 2011 07:25:40 +0000 (10:25 +0300)]
Staging: tm6000: remove unneeded check in get_next_buf()
We dereference "buf" on the line before so if it were NULL here we
would have OOPsed earlier. Also list_entry() never returns NULL.
And finally, we handled the situation where the list is empty
earlier in the function.
So this test isn't needed and I've removed it.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Thu, 7 Jul 2011 22:38:58 +0000 (23:38 +0100)]
staging: et131x: et1310_mac.c: ConfigMacStatRegs() add missing regs to be zeroed
The comment at the top of the function states 'we need to initialize all the macstat registers to zero', but not all macstat registers are zeroed. Zero the missing registers.
Tested on an ET-131x device.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Thu, 7 Jul 2011 22:38:57 +0000 (23:38 +0100)]
staging: et131x: Remove spaces between tabs inserted in patch
7b7fb34d3ffa
I must remember to run checkpatch on 'trivial' patches too...
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Thu, 7 Jul 2011 21:59:04 +0000 (22:59 +0100)]
staging: et131x: Convert et1310_address_map.h names from camel case
Trivial name changes.
Tested on an ET-131x device.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Thu, 7 Jul 2011 21:59:03 +0000 (22:59 +0100)]
staging: et131x: rename adapter->Flags to adapter->flags
Trivial rename of the adapter flags struct member to remove camel case.
Tested on a ET-131x device.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Joe Perches [Fri, 8 Jul 2011 04:31:06 +0000 (21:31 -0700)]
staging: brcm80211: nicpci: Neatening
Remove unnecessary casts of void *.
Spacing and removal of unnecessary parentheses.
80 column wrapping.
Comment neatening.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Thu, 7 Jul 2011 18:17:24 +0000 (14:17 -0400)]
Altera-stapl: Clean up makefile (-y instead of -objs)
Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Thu, 7 Jul 2011 18:17:25 +0000 (14:17 -0400)]
Ath6kl: TODO: Fix spelling :)
Change the word editign to editing
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Thu, 7 Jul 2011 17:45:46 +0000 (20:45 +0300)]
staging/easycap: remove oss support
remove support for OSS. OSS is being deprecated
and it is just plain headache to support both alsa and oss.
Last I broke the compilation when OSS is enabled with the patch
cdaa898b5efcc598ab1004e8f913061dc7005091
staging/easycap: kill telltale logic
so this fixes also that issue.
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Thu, 7 Jul 2011 17:45:45 +0000 (20:45 +0300)]
staging/easycap: remove unused macro MICROSECONDS
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Feng Tang [Fri, 8 Jul 2011 08:59:26 +0000 (09:59 +0100)]
sst: avoid unnecessary firmware reloading for MRST
SST HW on MRST doesn't need to reload the firmware during suspend/resume
cycle, so remove the extra workload. This also fix a bug that the firmware
sample rate can't be modified when there is no active playback/capture
stream.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lu Guanqun [Fri, 8 Jul 2011 08:59:10 +0000 (09:59 +0100)]
sst: report correct jack event
The status of jack event is compared bitwise:
[in sound/core/jack.c:snd_jack_report()]
for (i = 0; i < ARRAY_SIZE(jack_switch_types); i++) {
int testbit = 1 << i;
if (jack->type & testbit)
input_report_switch(jack->input_dev,
jack_switch_types[i],
status & testbit);
}
So in order to report the correct events, 3 should be passed instead of 1.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 7 Jul 2011 07:31:56 +0000 (00:31 -0700)]
staging: usbip: userspace: usbip-utils 1.1.1
Bump package revision number!
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 7 Jul 2011 07:31:55 +0000 (00:31 -0700)]
staging: usbip: userspace: README: update example output
Change a missed reference to the `list' command, and update the output
from `usbip bind ...' and `usbip list -r ...'
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 7 Jul 2011 07:31:54 +0000 (00:31 -0700)]
staging: usbip: userspace: usbip: modify `list' help message
The remote devices listed are, technically, exportable and not
necessarily exported.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 7 Jul 2011 07:31:53 +0000 (00:31 -0700)]
staging: usbip: userspace: usbip_list.c: modify exportable device output
Change spacing to provide better indentation for readability.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 7 Jul 2011 07:31:52 +0000 (00:31 -0700)]
staging: usbip: userspace: fix header installation bug
A bug that I created due to using simply expanding variables in the
makefiles. Although only unexpanded paths are at issue here, I decided
to use recursively expanding variables on all of the parameterized
values.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 7 Jul 2011 07:31:51 +0000 (00:31 -0700)]
staging: usbip: userspace: add new prefix for usbip network code
Change and add new usbip_net_ prefix to every function in the network
code for easier identification.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 7 Jul 2011 07:31:50 +0000 (00:31 -0700)]
staging: usbip: userspace: usbipd: major cleanup of daemon
Reorganize, rename [for clarity and to remove stub_driver
references], modify output messages, and cleanup coding style;
nevertheless, the actual implementation is pretty much untouched.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Thu, 7 Jul 2011 17:49:54 +0000 (10:49 -0700)]
staging: fix usbip printk format warning
Fix usbip printk format warning for size_t:
drivers/staging/usbip/stub_tx.c:236: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ravishankar [Thu, 7 Jul 2011 15:44:43 +0000 (21:14 +0530)]
Staging: comedi: fix warning issue in unioxx5.c
This is a patch to the unioxx5.c file that fixes up a warning found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ravishankar [Thu, 7 Jul 2011 14:23:04 +0000 (19:53 +0530)]
Staging: comedi: fix brace coding style issue in serial2002.c
This is a patch to the serial2002.c file that fixes up a brace warning found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ravishankar [Thu, 7 Jul 2011 12:05:27 +0000 (17:35 +0530)]
Staging: comedi: fix brace and printk coding style issue in serial2002.c
This is a patch to the serial2002.c file that fixes up a brace and printk warning found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oren Weil [Thu, 7 Jul 2011 13:02:45 +0000 (16:02 +0300)]
staging: mei: reordering the exit module cleanup
keeping the exit flow in a reverse order then the init flow.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Fri, 8 Jul 2011 08:45:49 +0000 (09:45 +0100)]
gma500: remove unneeded check in mdfld_crtc_mode_set()
The list cursor is never NULL in a list_for_each_entry() loop.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Fri, 8 Jul 2011 08:45:32 +0000 (09:45 +0100)]
gma500: reversed test in mdfld_dbi_dsr_exit()
We should only cleanup "dsr_info" if it's non-NULL obviously and not
the other way around.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Fri, 8 Jul 2011 08:45:19 +0000 (09:45 +0100)]
Staging: gma500: typo in array initialization
There is a comma missing here between the strings so they were
concatenated by mistake.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 8 Jul 2011 08:45:07 +0000 (09:45 +0100)]
gma500: Fix unused variable in cdv support
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 8 Jul 2011 08:44:52 +0000 (09:44 +0100)]
gma500; clean mid files
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 8 Jul 2011 08:44:34 +0000 (09:44 +0100)]
gma500: tidy the mrst files
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 8 Jul 2011 08:44:20 +0000 (09:44 +0100)]
gma500: tidy up the CDV files
We are close to having PSB and CDV ready for moving from staging so it's
time to get the polish out.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Patrik Jakobsson [Fri, 8 Jul 2011 08:44:03 +0000 (09:44 +0100)]
gma500: Mask out bits not part of the page table base address
Otherwise we can't ioremap the gtt and the screen gets garbled.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 8 Jul 2011 08:43:45 +0000 (09:43 +0100)]
gma500: Fix symbol clash with i915
Randy Dunlap reports:
| when both CONFIG_DRM_I915=y and CONFIG_DRM_PSB=y:
| drivers/staging/built-in.o: In function `intel_opregion_init':
| (.text+0x47943): multiple definition of `intel_opregion_init'
| drivers/gpu/built-in.o:(.text+0x17277a): first defined here
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 8 Jul 2011 08:43:29 +0000 (09:43 +0100)]
gma500: psb_intel_lvds style
Fixed some stylistic uglies noticed while fixing the previous bug
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 8 Jul 2011 08:43:15 +0000 (09:43 +0100)]
gma500: Re-order checks and dereferences in psb_intel_lvds
Dan Carpenter reports:
Smatch complains about
6a7afe3acc4b "gma500: continue abstracting
platform specific code"
drivers/staging/gma500/psb_intel_lvds.c +579 psb_intel_lvds_set_property(7)
warn: variable dereferenced before check 'encoder'
--- a/drivers/staging/gma500/psb_intel_lvds.c
+++ b/drivers/staging/gma500/psb_intel_lvds.c
@@ -575,11 +575,12 @@ int psb_intel_lvds_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t value)
{
- struct drm_encoder *pEncoder = connector->encoder;
+ struct drm_encoder *encoder = connector->encoder;
+ struct drm_psb_private *dev_priv = encoder->dev->dev_private;
^^^^^^^^^^^^
dereference encoder here.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesper Juhl [Fri, 8 Jul 2011 08:42:58 +0000 (09:42 +0100)]
gma500: strip unneeded version headers
Remove unneeded version.h includes from drivers/staging/gma500/
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/staging/gma500/.
This patch removes them.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
[updated for all th file cleanup and movement]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 6 Jul 2011 23:48:28 +0000 (16:48 -0700)]
Staging: delete tty drivers
Delete the drivers/staging/tty drivers as no one has wanted to step up
and maintain and fix them. This was discussed in commit
4a6514e6d096716fb7bedf238efaaca877e2a7e8 (tty: move obsolete and broken
tty drivers to drivers/staging/tty/)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 6 Jul 2011 23:44:09 +0000 (16:44 -0700)]
Staging: delete generic_serial drivers
No one has steped up to claim them, so as described in commit
4c37705877e74c02c968735c2eee0f84914cf557 (tty: move obsolete and broken
generic_serial drivers to drivers/staging/generic_serial/), they are now
deleted from the system.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 6 Jul 2011 23:34:27 +0000 (16:34 -0700)]
Staging: msm: delete the driver
It doesn't build anymore, no one is working on it, and, according to the
developers, there's a different one that is working and in the real part
of the kernel already.
Acked-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavel Roskin [Wed, 6 Jul 2011 14:15:44 +0000 (10:15 -0400)]
staging: comedi: remove COMEDI_DEVICE_CREATE macro, expand all callers
This is no longer needed as the code is now in the main kernel tree.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Chang [Wed, 6 Jul 2011 06:52:19 +0000 (14:52 +0800)]
staging: usbip: userspace: usbipd.c: fix userspace build error
When build userspace code, got the following error message:
make[2]: Entering directory `/usr/src/staging-2.6/drivers/staging/usbip/userspace/src'
CC usbip.o
...
CCLD usbip
CC usbipd.o
usbipd.c:30:25: fatal error: stub_driver.h: No such file or directory
compilation terminated.
make[2]: *** [usbipd.o] Error 1
make[2]: Leaving directory `/usr/src/staging-2.6/drivers/staging/usbip/userspace/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/staging-2.6/drivers/staging/usbip/userspace'
make: *** [all] Error 2
Due to commit
756d6726 and
a16941ae, stub_driver had been changed
into host_driver, so update header filename and functions name to
fix these build errors
Signed-off-by: David Chang <dchang@novell.com>
CC: Joe Perches <joe@perches.com>
Cc: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stephen Rothwell [Wed, 6 Jul 2011 05:02:49 +0000 (15:02 +1000)]
staging: use of tasklets requires including interrupt.h
The implicit include of linux/interrupt.h is being removed from
netdevice.h.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Chris Forbes [Fri, 1 Jul 2011 09:55:38 +0000 (21:55 +1200)]
drivers: staging: echo: Fix coding style issues.
Fixed coding style issues as flagged by checkpatch.pl
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Chris Forbes [Sun, 3 Jul 2011 04:38:20 +0000 (16:38 +1200)]
drivers: staging: bcm: sort: kill handrolled bubblesort
Replaced the handrolled bubblesort with the kernel's sort() function.
Makes things considerably smaller & clearer.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Thu, 30 Jun 2011 09:01:31 +0000 (12:01 +0300)]
Staging: iio: release locks on error paths
There are a couple places here where we should have called
mutex_unlock() before returning.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 1 Jul 2011 10:13:36 +0000 (11:13 +0100)]
staging:iio:gyro:adis16260 fix missing num_channels setup.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: stable <stable@kernel.org> [3.0]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bryan Freed [Tue, 28 Jun 2011 23:46:33 +0000 (16:46 -0700)]
staging: iio: light sensor: Add a calibscale file to the isl29018 light sensor driver.
Defaulting to 1, this gives a way to amplify the lux value before being
reduced by the programmed adc_bit shift.
Only support whole numbers right now. When this driver is converted to the new
IIO_CHAN framework, it will be easy to support the framework's pseudo float.
Add illuminance0_calibscale documentation to sysfs-bus-iio-light.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Wed, 29 Jun 2011 19:50:48 +0000 (22:50 +0300)]
Staging: iio: some uninitialized variable bugs
There were some uninitialized variable warnings in iio. Two of
these came from the recent changes to how the private data was
allocated in
83f0422dc6a16 "staging:iio:accel:sca3000: allocate
state in iio_dev and use iio_priv to access."
drivers/staging/iio/accel/sca3000_core.c: In function 'sca3000_probe':
drivers/staging/iio/accel/sca3000_core.c:1137:9: warning: 'st' may be used uninitialized in this function
drivers/staging/iio/adc/ad7291.c: In function 'ad7291_probe':
drivers/staging/iio/adc/ad7291.c:805:15: warning: 'chip' may be used uninitialized in this function
drivers/staging/iio/dac/ad5624r_spi.c: In function 'ad5624r_probe':
drivers/staging/iio/dac/ad5624r_spi.c:228:24: warning: 'st' may be used uninitialized in this function
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Walleij [Thu, 30 Jun 2011 06:31:59 +0000 (08:31 +0200)]
staging: ste_rmi4: remove cross-dependent platform data
The ux500 machine was actually defining platform data for the
staging driver ste_rmi4, which is not OK. Let us instead define
some __weak platform data in the machine so that the staging
driver can override it at compile-time and we can thus have the
driver self-contained in staging.
Reported-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kalle Valo [Thu, 30 Jun 2011 08:43:54 +0000 (11:43 +0300)]
staging: ath6kl: implement testmode rx command
Add new testmode command for retrieving rx reports from firmware.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arjan Mels [Thu, 30 Jun 2011 20:18:18 +0000 (22:18 +0200)]
drivers/staging/usbip: bugfix prevent driver unbind regression in linux-next
Fix regression problem in linux-next: post_reset and pre_reset are no longer
included in linux-next while they are in linux-3.0rc5.
Signed-off-by: Arjan Mels <arjan.mels@gmx.net>
Cc: usbip-devel <usbip-devel@lists.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tobias Klauser [Fri, 24 Jun 2011 13:48:47 +0000 (15:48 +0200)]
Staging: usbip: vhci-hcd: Do not kill already dead RX/TX kthread
When unbinding a device on the host which was still attached on the
client, I got a NULL pointer dereference on the client. This turned out
to be due to kthread_stop() being called on an already dead kthread.
Here is how I was able to reproduce the problem:
server:# usbip bind -b 1-2
client:# usbip attach -h server -b 1-2
server:# usbip unbind -b 1-2
This patch fixes the problem by checking the kthread before attempting
to kill it, as it is done on the opposite side in
stub_shutdown_connection().
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:52 +0000 (22:44 -0700)]
staging: usbip: userspace: configure.ac: change package data
Change package name to usbip-utils, email address to linux-usb, and
bump minor version number.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:49 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip_network.c: coding style cleanup
Change messges to debug, and fix a few coding style issues.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:47 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip_host: update function and variable names
Officially change stub_driver to usbip_host_driver. And, reorganize
usbip_host_driver.c while also cleaning up coding style.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:46 +0000 (22:44 -0700)]
staging: usbip: userspace: rename stub driver files
Rename stub_driver.? to usbip_host_driver.?
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:45 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip list: move output header
Delay the printing of the output header until the list is received
from the remote host. This allows notification that the host does not
have any exportable devices.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:44 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip list: edit output messages
Edit dbg and normal output messages for consistency and better
feedback.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:43 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip_unbind.c: implement using libsysfs
Modify unbind to use libsysfs, and include a check to verify that the
device is actually using usbip-host before proceeding. The output
messages have been changed to be consistent with `usbip bind'.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:42 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip_bind.c: major rewrite of the implementation
Rewrite functions in terms of libsysfs, which eliminates a lot of
helper functions simplifying the file layout. Now, the two processes
taking place here, an unbind of the old driver and a bind of
usbip-host, are single functions and have been renamed along with the
controlling function. A check to see if the device is already bound to
usbip-host is now included.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:41 +0000 (22:44 -0700)]
staging: usbip: userspace: utils.c: rewrite modify_match_busid
Rewrite the function to use libsysfs.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:40 +0000 (22:44 -0700)]
staging: usbip: userspace: utils: remove libsysfs circumvention
Removes all of the helper functions that used a lot of hard-coded
values intead of libsysfs. Most of these functions were unused
anyway.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:39 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip: modify command failure
When a bad option is given, display a message stating such and output
usage. When a bad command is given, output command help.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:38 +0000 (22:44 -0700)]
staging: usbip: userspace: libsrc: change all output messages to debug
The library should not be displaying random messages intermixed with
those from the programs that use them. So, instead, change all of the
output from the library to debug only, and allow the programs to
decide what to tell the user. This also changes the messages to use
the same form, which makes understanding them easier.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:37 +0000 (22:44 -0700)]
staging: usbip: userspace: libsrc: remove usbip.h
Remove the library version of usbip.h because its sole purpose was to
include other headers, which is bad practice. Also modify include
guards for consistency.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:36 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip.c: add log option
Add option for logging with syslog, and default to use stderr for
error and info messages.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:35 +0000 (22:44 -0700)]
staging: usbip: userspace: libsrc: set program name for logging
Set the program name to "libusbip" to identify that the message is
from the library code.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:34 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip_common.h: fixup header includes
Remove unnecessary headers from the file, and add the now missing
headers into the files that actually need them.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:33 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip_common.h: move enums
Relocate enums to follow logging macros.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:32 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip_common.h: cleanup log macros
Provide better abstraction for easier modification, and align the
macros for readability. Remove notice() because it is not used.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:31 +0000 (22:44 -0700)]
staging: usbip: userspace: update cleanup.sh
Modify $FILES to account for the new directory layout. Also, sort the
list of files within the variable to make it human-readable.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Fri, 24 Jun 2011 22:03:12 +0000 (17:03 -0500)]
staging: rtl8192u: Fix big-endian warning
When compiling the rtl8192u driver from staging on a big-endian
architecture, the following warning results:
CC [M] drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.o
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c: In function 'ieee80211_probe_resp':
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:780: warning: value computed is not used
The warning is due to misuse of cpu_to_le16().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Fri, 24 Jun 2011 22:02:54 +0000 (17:02 -0500)]
staging: rtl8192e: Fix big-endian warning
When compiling the rtl8192e driver from staging on a big-endian
architecture, the following warning results:
CC [M] drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.o
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c: In function 'ieee80211_probe_resp':
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:781: warning: value computed is not used
The warning is due to misuse of cpu_to_le16().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Fri, 24 Jun 2011 22:02:27 +0000 (17:02 -0500)]
staging: rtl8187se: Fix big-endian warning
When compiling the rtl8187se driver from staging on a big-endian
architecture, the following warning results:
CC [M] drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.o
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c: In function 'ieee80211_probe_resp':
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:824: warning: value computed is not used
The warning is due to misuse of cpu_to_le16().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 16 Jun 2011 09:24:59 +0000 (02:24 -0700)]
staging: usbip: userspace: cleanup README
Update examples to correspond with the new usbip-utils; edit grammar;
and cleanup format for consistency.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 16 Jun 2011 09:24:58 +0000 (02:24 -0700)]
staging: usbip: userspace: add name to AUTHORS
Add myself to the AUTHORS file.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 16 Jun 2011 09:24:57 +0000 (02:24 -0700)]
staging: usbip: userspace: remove usb.ids file
Inclusion of the usb.ids file is redundant. USBIDS_DIR is set in
configure.ac to a default of /usr/share/hwdata/. This can be
overridden using `./configure --with-usbids-dir=<dir>'.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sebastian Andrzej Siewior [Tue, 14 Jun 2011 10:09:38 +0000 (12:09 +0200)]
staging/westbridge: convert cyasgadget to new udc core
This is not compile tested as I failed at it. I added an #if 0 block
because I did not find the struct device of the device.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Márton Németh [Mon, 13 Jun 2011 21:30:09 +0000 (23:30 +0200)]
usbip: simplify port status saving
Use memcpy() function to save port status instead of
a handwritten for loop.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Márton Németh [Tue, 14 Jun 2011 06:28:26 +0000 (08:28 +0200)]
usbip: dump the port status difference
At the beginning of vhci_hub_control() function the port
status is saved to show what are the differences between the
previous and the new status. Change the dump function to
really show the differences in the status bit changes: put
a '+' sign before the symbolic name of a bit where a bit
was set, a '-' sign where the bit was cleared and a SPACE
where the bit was not changed. This is similar to the way
"diff -u" shows the changes and easy to understand.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Márton Németh [Mon, 13 Jun 2011 21:47:39 +0000 (23:47 +0200)]
usbip: only dump valid port status
The wIndex parameter of vhci_hub_control() is always zero when the
request type is GetHubDescriptor, see drivers/usb/core/hub.c::get_hub_descriptor()
and Universal Serial Bus Specification revision 2.0 (April 27, 2000) Section
11.24.2.5 "Get Hub Descriptor". This means the variable rhport will not contain
any useful index. Only use valid rhport values.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Mon, 4 Jul 2011 20:11:45 +0000 (21:11 +0100)]
staging: et131x: Remove typedefs from et1310_phy.h
Fixes the associated checkpatch warnings.
Tested with ifconfig/general use of a device (Agere Systems ET-131x PCI-E
Ethernet Controller (rev 02)).
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Sun, 3 Jul 2011 17:08:23 +0000 (18:08 +0100)]
staging: et131x: Remove some unecessary packet accounting code
The ce_stats ipackets and opackets members are only used to update
the net_device_stats->[r,t]x_packets counters, so get rid of them.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Sun, 3 Jul 2011 17:08:22 +0000 (18:08 +0100)]
staging: et131x: Fix stats->rx_packets accounting
The net_device_stats->rx_packets counter is not getting updated.
This is due to checking a fMP_ADAPTER_LINK_DETECTION flag prior to
updating which is never set.
Solved by using netif_carrier_ok() to test for a link, and removing
the fMP_ADAPTER_LINK_DETECTION flag, which looks to be a broken
mechanism.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wwang [Tue, 5 Jul 2011 03:07:50 +0000 (11:07 +0800)]
staging: rts_pstor: Fix a bug that a MMCPlus card can't be accessed
1. Don't switch bus if cmd14 timedout
2. Add a new group of return codes for mmc_test_switch_bus
Signed-off-by: wwang <wei_wang@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Joe Perches [Tue, 5 Jul 2011 22:21:34 +0000 (15:21 -0700)]
MAINTAINERS: Add remaining staging entries
Add the staging entries from various TODO files
to MAINTAINERS. Add a few web links as well.
Miscellaneous staging typo section header fix.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 17:45:40 +0000 (18:45 +0100)]
gma500: oops.. thou shalt stg add...
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 17:45:28 +0000 (18:45 +0100)]
gma500: Update the TODO list
This is now horribly out of date
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 5 Jul 2011 22:02:58 +0000 (00:02 +0200)]
staging: brcm80211: added newlines to some debug macros in bcmsdh_sdmmc.c
Some macros were missing a terminating '\n' character. This commit fixes
those.
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 5 Jul 2011 22:02:57 +0000 (00:02 +0200)]
staging: brcm80211: simpler string handling in brcmf_c_pktfilter_offload_set()
Replaced two functions with strcpy().
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 5 Jul 2011 22:02:56 +0000 (00:02 +0200)]
staging: brcm80211: remove macro WLBANDINITFN from brcmsmac
The macro WLBANDINITFN does nothing meaningful in the brcmsmac
driver and has been removed.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This page took 0.043359 seconds and 5 git commands to generate.