Linus Torvalds [Mon, 28 Mar 2011 22:31:05 +0000 (15:31 -0700)]
Merge branch 'for-linus-unmerged' of git://git./linux/kernel/git/mason/btrfs-unstable
* 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (45 commits)
Btrfs: fix __btrfs_map_block on 32 bit machines
btrfs: fix possible deadlock by clearing __GFP_FS flag
btrfs: check link counter overflow in link(2)
btrfs: don't mess with i_nlink of unlocked inode in rename()
Btrfs: check return value of btrfs_alloc_path()
Btrfs: fix OOPS of empty filesystem after balance
Btrfs: fix memory leak of empty filesystem after balance
Btrfs: fix return value of setflags ioctl
Btrfs: fix uncheck memory allocations
btrfs: make inode ref log recovery faster
Btrfs: add btrfs_trim_fs() to handle FITRIM
Btrfs: adjust btrfs_discard_extent() return errors and trimmed bytes
Btrfs: make btrfs_map_block() return entire free extent for each device of RAID0/1/10/DUP
Btrfs: make update_reserved_bytes() public
btrfs: return EXDEV when linking from different subvolumes
Btrfs: Per file/directory controls for COW and compression
Btrfs: add datacow flag in inode flag
btrfs: use GFP_NOFS instead of GFP_KERNEL
Btrfs: check return value of read_tree_block()
btrfs: properly access unaligned checksum buffer
...
Fix up trivial conflicts in fs/btrfs/volumes.c due to plug removal in
the block layer.
Linus Torvalds [Mon, 28 Mar 2011 22:16:10 +0000 (15:16 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (81 commits)
xo15-ebook: Remove device.wakeup_count
ips: use interruptible waits in ips-monitor
acer-wmi: does not poll device status when WMI event is available
acer-wmi: does not set persistence state by rfkill_init_sw_state
platform-drivers: x86: fix common misspellings
acer-wmi: use pr_<level> for messages
asus-wmi: potential NULL dereference in show_call()
asus-wmi: signedness bug in read_brightness()
platform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0
platform-driver-x86: fix wrong merge for compal-laptop.c
msi-laptop: use pr_<level> for messages
Platform: add Samsung Laptop platform driver
acer-wmi: Fix WMI ID
acer-wmi: deactive mail led when power off
msi-laptop: send out touchpad on/off key
acer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE
platform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id table
sony-laptop: potential null dereference
sony-laptop: handle allocation failures
sony-laptop: return negative on failure in sony_nc_add()
...
Linus Torvalds [Mon, 28 Mar 2011 22:14:45 +0000 (15:14 -0700)]
Merge branch 'for-torvalds' of git://git./linux/kernel/git/linusw/linux-stericsson
* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
mach-ux500: configure board for the TPS61052 regulator v2
mach-ux500: provide ab8500 init vector
mach-ux500: board support for AB8500 GPIO driver
gpio: driver for 42 AB8500 GPIO pins
Linus Torvalds [Mon, 28 Mar 2011 22:08:48 +0000 (15:08 -0700)]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung
* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: Suspend: Fix dependency of ARCH_SUSPEND_POSSIBLE
ARM: SAMSUNG: Fix CPU idmask
ARM: EXYNOS4: Fix addruart macro
ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKC210
ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKV310
ARM: EXYNOS4: Fix build warning on regarding SATA_AHCI_PLATFORM
ARM: S5PV210: Remove duplicated inclusion
ARM: S5PV210: Fix security engine interrupt names
ARM: S5P64X0: Fix iodesc array size for S5P6450
Linus Torvalds [Mon, 28 Mar 2011 20:07:49 +0000 (13:07 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aesni-intel - fixed problem with packets that are not multiple of 64bytes
Linus Torvalds [Mon, 28 Mar 2011 20:06:32 +0000 (13:06 -0700)]
Merge branch 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score
* 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score:
score: Use generic show_interrupts()
score: Convert to new irq function names
score: lost a semicolon in asm/irqflags.h
score: Select GENERIC_HARDIRQS_NO_DEPRECATED
score: Convert irq_chip to new functions
Matthew Garrett [Mon, 28 Mar 2011 12:46:02 +0000 (12:46 +0000)]
acpi: Remove sysfs_create_link from video driver
The acpi video driver attempts to explicitly create a sysfs link between
the acpi device and the associated PCI device. However, we're now also
doing this from the backlight core, which means that we get a backtrace
caused by a duplicate file. Remove the code and leave it up to the
backlight core.
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 28 Mar 2011 20:03:31 +0000 (13:03 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (39 commits)
Treat writes as new when holes span across page boundaries
fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS.
ocfs2/dlm: Move kmalloc() outside the spinlock
ocfs2: Make the left masklogs compat.
ocfs2: Remove masklog ML_AIO.
ocfs2: Remove masklog ML_UPTODATE.
ocfs2: Remove masklog ML_BH_IO.
ocfs2: Remove masklog ML_JOURNAL.
ocfs2: Remove masklog ML_EXPORT.
ocfs2: Remove masklog ML_DCACHE.
ocfs2: Remove masklog ML_NAMEI.
ocfs2: Remove mlog(0) from fs/ocfs2/dir.c
ocfs2: remove NAMEI from symlink.c
ocfs2: Remove masklog ML_QUOTA.
ocfs2: Remove mlog(0) from quota_local.c.
ocfs2: Remove masklog ML_RESERVATIONS.
ocfs2: Remove masklog ML_XATTR.
ocfs2: Remove masklog ML_SUPER.
ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c
ocfs2: Remove mlog(0) from fs/ocfs2/slot_map.c
...
Fix up trivial conflict in fs/ocfs2/super.c
Goldwyn Rodrigues [Thu, 17 Feb 2011 15:44:40 +0000 (09:44 -0600)]
Treat writes as new when holes span across page boundaries
When a hole spans across page boundaries, the next write forces
a read of the block. This could end up reading existing garbage
data from the disk in ocfs2_map_page_blocks. This leads to
non-zero holes. In order to avoid this, mark the writes as new
when the holes span across page boundaries.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: jlbec <jlbec@evilplan.org>
Joel Becker [Mon, 28 Mar 2011 16:44:26 +0000 (09:44 -0700)]
Merge branch 'mlog_replace_for_39' of git://repo.or.cz/taoma-kernel into ocfs2-merge-window-fix
Rakib Mullick [Fri, 18 Mar 2011 11:01:08 +0000 (17:01 +0600)]
fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS.
When CONFIG_DEBUG_FS=y and CONFIG_OCFS2_FS_STATS=n, we get the
following warning:
fs/ocfs2/cluster/tcp.c:213:16: warning: ‘o2net_get_func_run_time’
defined but not used
Since o2net_get_func_run_time is only called from
o2net_update_recv_stats, so move it under CONFIG_OCFS2_FS_STATS.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: jlbec <jlbec@evilplan.org>
Linus Torvalds [Mon, 28 Mar 2011 14:52:58 +0000 (07:52 -0700)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Ensure that rpc_release_resources_task() can be called twice.
NFS: Don't leak RPC clients in NFSv4 secinfo negotiation
NFS: Fix a hang in the writeback path
Andres Salomon [Mon, 28 Mar 2011 04:26:03 +0000 (21:26 -0700)]
MFD: allow cs5535-mfd to build on X86 only
Stephen ran into the following build error:
drivers/mfd/cs5535-mfd.c:30:22: error: asm/olpc.h: No such file or directory
olpc.h exists only on x86 (and in the future, ARM). Rather than
wrapping the include in an #ifdef, just change cs5535-mfd to only build
on x86.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 28 Mar 2011 14:42:58 +0000 (07:42 -0700)]
drbd: fix up merge error
In commit
95a0f10cddbf ("drbd: store in-core bitmap little endian,
regardless of architecture") drbd had made the sane choice to use
little-endian bitmap functions everywhere. However, it used the
horrible old functions names from <asm-generic/bitops/le.h>, that were
never really meant to be exported.
In the meantime, things got cleaned up, and in commit
c4945b9ed472
("asm-generic: rename generic little-endian bitops functions") we
renamed the LE bitops to something sane, exactly so that they could be
used in random code without people gouging their eyes out when seeing
the crazy jumble of letters that were the old internal names.
As a result the drbd thing merged cleanly (commit
8d49a77568d1: "Merge
branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block"),
since there was no data conflict - but the end result obviously doesn't
actually compile.
Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Garrett [Mon, 28 Mar 2011 10:47:38 +0000 (06:47 -0400)]
Merge branch 'x86-platform-next' into x86-platform
Matthew Garrett [Mon, 28 Mar 2011 10:40:23 +0000 (06:40 -0400)]
xo15-ebook: Remove device.wakeup_count
This is handled automatically now.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Jesse Barnes [Mon, 28 Mar 2011 10:36:30 +0000 (06:36 -0400)]
ips: use interruptible waits in ips-monitor
This is what I intended to do since:
1) the driver handles variable waits just fine, and
2) interruptible waits aren't reported as load in the load avg.
Reported-and-tested-by: Andreas Hartmann <andihartmann@freenet.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Lee, Chun-Yi [Mon, 28 Mar 2011 10:34:13 +0000 (06:34 -0400)]
acer-wmi: does not poll device status when WMI event is available
Acer WMI hotkey event's result include current device status, just
need sync the status to killswitch after acer-wmi driver receive
hotkey event but not always poll device status. This is good for
performance.
But, if use EC raw mode, Acer BIOS will not emit wmi event and
leave EC to control device status. So, still startup polling job
when doesn't detect WMI event GUID or user choice to use ec_raw_mode.
Tested on Acer TravelMate 8572 notebook.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Lee, Chun-Yi [Mon, 28 Mar 2011 08:52:02 +0000 (16:52 +0800)]
acer-wmi: does not set persistence state by rfkill_init_sw_state
Acer BIOS keeps devices state when system reboot, but reset to default
device states (Wlan on, Bluetooth off, wwan on) if system cold boot.
That means BIOS's initial state is not always real persistence.
So, removed rfkill_init_sw_state because it sets initial state to
persistence then replicate to other new killswitch when rfkill-input
enabled.
After removed it, acer-wmi set initial soft-block state after rfkill
register, and doesn't allow set_block until rfkill initial finished.
Reference: bko#31002
https://bugzilla.kernel.org/show_bug.cgi?id=31002
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: OldÅ\99ich JedliÄ\8dka <oldium.pro@seznam.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Lucas De Marchi [Thu, 17 Mar 2011 20:18:22 +0000 (17:18 -0300)]
platform-drivers: x86: fix common misspellings
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Lee, Chun-Yi [Wed, 16 Mar 2011 10:52:36 +0000 (18:52 +0800)]
acer-wmi: use pr_<level> for messages
acer-wmi: use pr_<level> for messages
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Dan Carpenter [Tue, 15 Mar 2011 07:07:37 +0000 (10:07 +0300)]
asus-wmi: potential NULL dereference in show_call()
In the earlier check we assumed that "obj" could be NULL. I looked at
some of the other places that call evaluate_object() and they check
for NULL as well.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Dan Carpenter [Tue, 15 Mar 2011 07:06:23 +0000 (10:06 +0300)]
asus-wmi: signedness bug in read_brightness()
"err" needs to be signed for the error handling to work.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Axel Lin [Mon, 14 Mar 2011 10:56:18 +0000 (18:56 +0800)]
platform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0
dmi_check_system() walks the table running matching functions until
someone returns non zero or we hit the end.
This patch makes dmi_check_cb to return 1 so dmi_check_system() return
immediately when a match is found.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Axel Lin [Mon, 14 Mar 2011 10:53:14 +0000 (18:53 +0800)]
platform-driver-x86: fix wrong merge for compal-laptop.c
I found the commit
80183a4b
"compal-laptop/fujitsu-laptop/msi-laptop: make dmi_check_cb to return 1 instead of 0"
has wrong patch merge.
The original patch change the return value for dmi_check_cb():
https://lkml.org/lkml/2010/7/2/88
But commit
80183a4b changed the return value for set_backlight_level.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Joey Lee [Wed, 16 Mar 2011 07:55:19 +0000 (01:55 -0600)]
msi-laptop: use pr_<level> for messages
msi-laptop: use pr_<level> for messages
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Greg Kroah-Hartman [Fri, 11 Mar 2011 17:41:19 +0000 (12:41 -0500)]
Platform: add Samsung Laptop platform driver
This adds the samsung-laptop driver to the kernel. It now supports
all known Samsung laptops that use the SABI interface.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Pali Rohár [Fri, 11 Mar 2011 17:36:43 +0000 (12:36 -0500)]
acer-wmi: Fix WMI ID
This patch change WMI ID to upper characters. With this patch module
acer-wmi is automatically loaded when WMI ID is detected.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Pali Rohár [Sat, 26 Feb 2011 20:18:58 +0000 (21:18 +0100)]
acer-wmi: deactive mail led when power off
This patch deactive mail led when laptop is going to hibernete/suspend
or power off. After resume from hibernate/suspend correctly restore
mail led state.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Lee, Chun-Yi [Mon, 7 Mar 2011 07:46:28 +0000 (15:46 +0800)]
msi-laptop: send out touchpad on/off key
MSI BIOS's raw behavior is send out KEY_TOUCHPAD_TOGGLE key when user
pressed touchpad hotkey.
Actually, we can capture the real touchpad status by read 0xE4 EC address
on MSI netbook/notebook. So, add msi-laptop input device for send out
KEY_TOUCHPAD_ON or KEY_TOUCHPAD_OFF key when user pressed Fn+F3 touchpad
hotkey. It leave userland applications to know the real touchpad status.
Tested on MSI netbook U-100, U-115, U160(N051), U160DX, N014, N034
Tested on MSI notebook CR620
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Lee, Chun-Yi [Tue, 1 Mar 2011 17:07:11 +0000 (01:07 +0800)]
acer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE
Set the touchpad toggle key code from F22 to KEY_TOUCHPAD_TOGGLE,
and userspace should use udev's key re-mapping facilities while X
is unable to process keycodes above 255 to adjust to the keycode.
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Axel Lin [Sat, 26 Feb 2011 15:03:34 +0000 (23:03 +0800)]
platform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id table
The platform_device_id table is supposed to be zero-terminated.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Dan Carpenter [Sun, 27 Feb 2011 14:13:25 +0000 (17:13 +0300)]
sony-laptop: potential null dereference
In the original code, if "device_enum" was NULL then it would
dereference it when it printed the error message.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Dan Carpenter [Sat, 26 Feb 2011 12:55:24 +0000 (15:55 +0300)]
sony-laptop: handle allocation failures
Return -ENOMEM if kzalloc() fails. The callers already handle error
returns.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Dan Carpenter [Sat, 26 Feb 2011 12:54:57 +0000 (15:54 +0300)]
sony-laptop: return negative on failure in sony_nc_add()
There were two places in sony_nc_add() where we returned zero on failure
instead of a negative error code.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Dan Carpenter [Sat, 26 Feb 2011 12:54:27 +0000 (15:54 +0300)]
sony-laptop: make a couple variables static
Sparse complains that these variables should be static.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Keng-Yu Lin [Tue, 1 Mar 2011 04:56:13 +0000 (12:56 +0800)]
eeepc-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE
Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Ike Panhc [Wed, 23 Feb 2011 13:39:59 +0000 (21:39 +0800)]
ideapad: read brightness setting on brightness key notify
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=25922
On ideapad Y530, the brightness key notify will be blocked if the last notify
is not responsed by getting the brightness value. Read value when we get the
notify shall fix the problem and will not have any difference on other ideapads.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Randy Dunlap [Tue, 22 Feb 2011 21:47:35 +0000 (13:47 -0800)]
eeepc-wmi: kconfig changes to fix build errors
Fix eeepc-wmi build when CONFIG_HOTPLUG_PCI is not enabled:
eeepc-wmi.c:(.text+0x3bc5e9): undefined reference to `pci_hp_deregister'
eeepc-wmi.c:(.text+0x3bcca4): undefined reference to `__pci_hp_register'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:43 +0000 (10:20 +0100)]
eeepc-wmi: restore KEY_CAMERA_* keys lost in
190ca27
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:42 +0000 (10:20 +0100)]
asus-wmi: add hwmon interface and pwm1
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:41 +0000 (10:20 +0100)]
asus-wmi: add some common device ids and method ids
I also found some leds ids (0x00020011-0x00020016 and 0x00040015),
but since they are not really present on the notebook,
I can't guess their name .
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:40 +0000 (10:20 +0100)]
asus-nb-wmi: Asus Notebooks WMI Driver
Introduce a new driver for Asus Notebooks shipped with
a WMI device instead of the old ACPI device. The WMI
device is almost the same as the one present in Eee PC,
but the event guid and the keymap are different.
The keymap comes from asus-laptop module.
On Asus notebooks, when you call the WMI device, you always
need a 64bit buffer, even if you only want to get the state
of a device (tested on a G73).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:39 +0000 (10:20 +0100)]
asus-wmi: allow debugfs interface to call arbitrary method
Also add some # format flags to debugfs output.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:38 +0000 (10:20 +0100)]
asus-wmi: add calls to INIT, SPEC and SFUN on init
INIT() call is needed to enable hotkeys on G73
SPEC() and SFUN() allow us to know more about
available features.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:37 +0000 (10:20 +0100)]
asus-wmi: fix and clean backlight code
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:36 +0000 (10:20 +0100)]
asus-wmi: try to guess the right DSTS methods
This is tricky, new WMI aware notebooks seems to use
0x53545344 while Eee PCs are using 0x53544344. But there
is no way to know if there is an Eee PC in that wild that is
using 0x53545344 or a notebook using 0x53544344. So the
driver try to guess the available DSTS method ... But most Eee PCs
never return 0xFFFFFFFE when a method is not available, they return
0 instead (and that's useless).
So, first, try 0x53544344 then 0x53545344. We will find
a better way when we got more data.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:35 +0000 (10:20 +0100)]
asus-wmi: factorise wmi_evaluate_method call
This patch create a single function to call the
WMI methods. This function handle inexistent methods (when
implemented by the WMI devices, and this is not the case on
Eee PCs), ACPI errors, etc..
Also pack struct bios_arg, and make sure that we always send
a 64bit buffer when calling a WMI method, because this is
needed on Asus notebooks.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:34 +0000 (10:20 +0100)]
asus-wmi: handle "unknown status" bit
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:33 +0000 (10:20 +0100)]
asus-wmi: introduce struct asus_rfkill
First, this allow use to remove the custom asusrfkill_wlan_query,
but this will also allow us to give struct asus_wmi * to
get_devstate/set_devstate later.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:32 +0000 (10:20 +0100)]
asus-wmi: minor cleanups
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:31 +0000 (10:20 +0100)]
eeepc-wmi: asus generic asus-wmi.ko module
New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
eeepc-wmi module on Asus notebooks, and we want to
keep the eeepc-wmi module for backward compatibility,
this patch introduce a new module, named asus-wmi, that
will be used by eeepc-wmi and the new Asus Notebook WMI
Driver.
eeepc-wmi's input device strings (device name and phys)
are kept, but rfkill and led names are changed (s/eeepc/asus/).
This should not break anything since rfkill are used by type or
index, not by name, and the eeepc::touchpad led wasn't working
correctly before 2.6.39 anyway.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sat, 26 Feb 2011 09:20:30 +0000 (10:20 +0100)]
asus-wmi: move generic code to asus-wmi
New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
a module named eeepc-laptop on Asus Notebooks, start by
copying all the code to asus-wmi.c.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Durgadoss R [Sun, 20 Feb 2011 17:35:43 +0000 (23:05 +0530)]
medfield: Add Thermal Driver
This is the basic thermal sensor driver for Intel MID platform using the
Medfield chipset. It plugs in via the thermal drivers and provides sensor
readings for the device sensors.
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Anssi Hannula [Sun, 20 Feb 2011 18:07:26 +0000 (20:07 +0200)]
hp-wmi: add rfkill support for wireless query 0x1b
Some recent HP laptops use a new wireless query command type 0x1b.
Add support for it. Tested on HP Mini 5102.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Anssi Hannula [Sun, 20 Feb 2011 18:07:25 +0000 (20:07 +0200)]
hp-wmi: make rfkill initialization failure non-fatal
hp_wmi_rfkill_setup cleans up after itself now, so failing completely is
no longer necessary.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Anssi Hannula [Sun, 20 Feb 2011 18:07:24 +0000 (20:07 +0200)]
hp-wmi: clear rfkill device pointers when appropriate
NULLify rfkill pointers during initialization. This prevents dereference
of invalid pointer in case the driver is rebound and some rfkill device
isn't detected anymore. Clear them also in hp_wmi_rfkill_setup failure
path so that an rfkill initialization failure doesn't need to be fatal
for the whole driver.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Anssi Hannula [Sun, 20 Feb 2011 18:07:23 +0000 (20:07 +0200)]
hp-wmi: split rfkill initialization out of hp_wmi_bios_setup
Split initialization of rfkill devices from hp_wmi_bios_setup() to
hp_wmi_rfkill_setup(). This makes the code somewhat cleaner, especially
with the future command 0x1b rfkill support.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Anssi Hannula [Sun, 20 Feb 2011 18:07:22 +0000 (20:07 +0200)]
hp-wmi: allow setting input and output buffer sizes separately
Split buffersize parameter of hp_wmi_perform_query to insize and
outsize. Existing callers are changed to use the same value for insize
and outsize to avoid any regressions, with the exception of
hp_wmi_set_block where the output buffer is unused and therefore outsize
is set to 0 (this change is not seen by BIOS code).
The maximum input buffer size is kept at 4 bytes as per struct
bios_args. Some commands exist that take longer buffers, but they
haven't been implemented. The data portion of bios_args can be trivially
made dynamically allocated later when such larger buffers become needed.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Anssi Hannula [Sun, 20 Feb 2011 18:07:21 +0000 (20:07 +0200)]
hp-wmi: remove a variable that is never read
Remove the status variable from hp_wmi_perform_query which holds the
return value from wmi_evaluate_method(). It is never checked as the
function bails out if the output buffer hasn't been allocated which
indicates the call failed.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Anssi Hannula [Sun, 20 Feb 2011 18:07:20 +0000 (20:07 +0200)]
hp-wmi: check query return value in hp_wmi_perform_query
Check BIOS provided return value code in hp_wmi_perform_query and print
a warning on error. Printing is suppressed for HPWMI_RET_UNKNOWN_CMDTYPE
which is returned when the command type is unsupported.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Mattia Dongili [Sat, 19 Feb 2011 02:52:32 +0000 (11:52 +0900)]
sony-laptop: implement new backlight control method
Reasonably recent Vaios have a 0x12f or 0x137 handler that exposes a
fine lid backlight regulation with values ranging from 0 to 255.
The patch is based on findings and code from Javier Achirica
<achirica@gmail.com> and Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Mattia Dongili [Sat, 19 Feb 2011 02:52:31 +0000 (11:52 +0900)]
sony-laptop: implement keyboard backlight support
Recent Vaios have the opportunity to control the keyboard backlight via
ACPI calls to the SNC device.
Introduce two module parameters to control how keyboard backlight should
be set at module loading (default to on and with 10 seconds timeout).
Tested-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Mattia Dongili [Sat, 19 Feb 2011 02:52:30 +0000 (11:52 +0900)]
sony-laptop: cache handles and report them via sysfs
Avoid calling into acpi each time we need to lookup a method handle
and report the available handles to ease collection of information when
debugging issues. Also move initialization of the platform driver
earlier to allow adding files from other setup functions.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Mattia Dongili [Sat, 19 Feb 2011 02:52:29 +0000 (11:52 +0900)]
sony-laptop: remove unused Type4 define
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Mattia Dongili [Sat, 19 Feb 2011 02:52:28 +0000 (11:52 +0900)]
sony-laptop: use pr_<level> for messages
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Mattia Dongili [Sat, 19 Feb 2011 02:52:27 +0000 (11:52 +0900)]
sony-laptop: ignore hard switch rfkill events (SPIC)
There is not much use for these events in userspace and handling the
events themselves seems to get in the way of the actual activation of
the rf devices. The SNC device doesn't expose them already.
https://bugzilla.kernel.org/show_bug.cgi?id=15303
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Mattia Dongili [Sat, 19 Feb 2011 02:52:26 +0000 (11:52 +0900)]
sony-laptop: documentation updates
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Mattia Dongili [Sat, 19 Feb 2011 02:52:25 +0000 (11:52 +0900)]
sony-laptop: add some debug printk useful for bug reports
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Randy Dunlap [Wed, 16 Feb 2011 22:31:02 +0000 (14:31 -0800)]
platform/x86: intel_mid_powerbutton needs INPUT
intel_mid_powerbtn.c uses input interfaces, so it should depend
on INPUT to fix build errors when CONFIG_INPUT is not enabled:
intel_mid_powerbtn.c:(.text+0x56ca8f): undefined reference to `input_event'
intel_mid_powerbtn.c:(.devinit.text+0x2e7b4): undefined reference to `input_allocate_device'
intel_mid_powerbtn.c:(.devinit.text+0x2e7ff): undefined reference to `input_set_capability'
intel_mid_powerbtn.c:(.devinit.text+0x2e84a): undefined reference to `input_register_device'
intel_mid_powerbtn.c:(.devinit.text+0x2e88b): undefined reference to `input_free_device'
intel_mid_powerbtn.c:(.devexit.text+0x42f0): undefined reference to `input_unregister_device'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Hong Liu <hong.liu@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Colin Ian King [Thu, 17 Feb 2011 18:44:09 +0000 (18:44 +0000)]
Enable Dell All-In-One volume up/down keys
Enable volume up and down hotkeys on WMI events
GUID
284A0E6B-380E-472A-921F-
E52786257FB4 and
GUID
02314822-307C-4F66-bf0E-
48AEAEB26CC8.
Also works around a firmware bug where the _WED method
should return an integer containing the key code and in fact
the method returns the key code in element zero of a buffer.
BugLink: http://bugs.launchpad.net/bugs/701530
BugLink: http://bugs.launchpad.net/bugs/676997
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Hong Liu [Mon, 7 Feb 2011 19:45:55 +0000 (14:45 -0500)]
intel_mid_powerbtn: add power button driver for Medfield platform (#3)
The power button is connected to MSIC on Medfield, we will get two
interrupts from IOAPIC when pressing or releasing the power button.
Signed-off-by: Hong Liu <hong.liu@intel.com>
[Minor fixes as noted by Dmitry]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:30:47 +0000 (13:30 +0100)]
eeepc-wmi: add camera keys
These keys are supposed to be handled by any software
using the camera (like webKam or cheese...). They can
also be used to actually move the camera when possible.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:43 +0000 (13:28 +0100)]
eeepc-wmi: reorder device ids
Each device seems to be in a "group" (devid >> 16 & 0xFF).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:42 +0000 (13:28 +0100)]
eeepc-wmi: add touchpad sysfs file
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:27:31 +0000 (13:27 +0100)]
asus-laptop: remove deprecated interfaces (lcd_switch and display_get)
I should have done that one year ago, so it's more than
time to do it.
These two features use non-standard interfaces. There are the
only features that really need multiple path to guess what's
the right method name on a specific laptop.
Removing them allow to remove a lot of code an significantly
clean the driver.
This will affect the backlight code which won't be able to know
if the backlight is on or off.
The platform display file will also be write only (like the one
in eeepc-laptop).
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:27:30 +0000 (13:27 +0100)]
asus-laptop: let WLED alone on L1400B
Asus took the DSDT from another model (L84F), made some change
to make it work, but forgot to remove WLED method (the laptop
doesn't have a wireless card). They even didn't change the model
name.
ref: https://bugzilla.kernel.org/show_bug.cgi?id=25712
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:30:48 +0000 (13:30 +0100)]
eeepc-wmi: comments keymap to clarify the meaning of some keys
Found while checking PDF manuals...
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:41 +0000 (13:28 +0100)]
eeepc-wmi: real touchpad led device id is 0x001000012
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:40 +0000 (13:28 +0100)]
eeepc-wmi: respect wireless_hotplug setting
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:39 +0000 (13:28 +0100)]
eeepc-wmi: support backlight power (bl_power) attribute
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:38 +0000 (13:28 +0100)]
eeepc-wmi: set the right key code for 0xe9
This key should power off the backlight, not the display,
it is also used in acpi/video.c to do the same thing.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:37 +0000 (13:28 +0100)]
eeepc-wmi: add wimax support
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:36 +0000 (13:28 +0100)]
eeepc-wmi: add camera and card reader support
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:35 +0000 (13:28 +0100)]
eeepc-wmi: use the presence bit correctly
I checked some more DSDT, and it seems that I wasn't
totally right about the meaning of DSTS return value.
Bit 0 is clearly the status of the device, and I discovered
that bit 16 is set when the device is present.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:34 +0000 (13:28 +0100)]
eeepc-wmi: reorder defines
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:33 +0000 (13:28 +0100)]
eeepc-wmi: switch to platform_create_bundle()
This allow to remove ~30 lines of code.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:32 +0000 (13:28 +0100)]
eeepc-wmi: add hibernate/resume callbacks
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:31 +0000 (13:28 +0100)]
eeepc-wmi: add an helper using simple return codes
eeepc_wmi_get_devstate returns an acpi_status, so each
call need extra logic to handle the return code. This
patch add a simple getter, returning a boolean (or a
negative error code).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:30 +0000 (13:28 +0100)]
eeepc-wmi: return proper error code in eeepc_rfkill_set()
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:29 +0000 (13:28 +0100)]
eeepc-wmi: serialize access to wmi method
\AMW0.WMBC, which is the main method that we use,
is not reentrant. When wireless hotpluging is enabled,
toggling the status of the wireless device using WMBC will
trigger a notification and the notification handler need to
call WMBC again to get the new status of the device, this
will trigger the following error:
ACPI Error (dswload-0802): [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (
20100428/psloop-231)
ACPI Error (psparse-0537): Method parse/execution failed [\AMW0.WMBC] (Node
f7023b88), AE_ALREADY_EXISTS
ACPI: Marking method WMBC as Serialized because of AE_ALREADY_EXISTS error
Since there is currently no way to tell the acpi subsystem to mark
a method as serialized, we do it in eeepc-wmi.
Of course, we could let the first call fail, and then it would work,
but it doesn't seems really clean, and it will make the first
WMBC call return a random value.
This patch was tested on EeePc 1000H with a RaLink RT2860
wireless card using the rt2800pci driver. rt2860sta driver
seems to deadlock when we remove the pci device...
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:28 +0000 (13:28 +0100)]
eeepc-wmi: add hotplug code for Eeepc 1000H
Implement wireless like hotplug handling (code stolen from eeepc-laptop).
Reminder: on some models rfkill is implemented by logically unplugging the
wireless card from the PCI bus. Despite sending ACPI notifications, this does
not appear to be implemented using standard ACPI hotplug - nor does the
firmware provide the _OSC method required to support native PCIe hotplug.
The only sensible choice appears to be to handle the hotplugging directly in
the platform driver.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:27 +0000 (13:28 +0100)]
eeepc-wmi: add wlan key found on 1015P
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Corentin Chary [Sun, 6 Feb 2011 12:28:26 +0000 (13:28 +0100)]
eeepc-wmi: reorder keymap
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Paul Fox [Thu, 3 Feb 2011 16:27:55 +0000 (16:27 +0000)]
OLPC XO-1.5 ebook switch driver
The OLPC XO-1.5 has an ebook switch, triggered when the laptop
screen is rotated then folding down, converting the device into ebook
form.
This switch is exposed through ACPI. Add a driver that exposes it
to userspace as an input device.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Chris Mason [Mon, 28 Mar 2011 01:23:21 +0000 (21:23 -0400)]
Btrfs: fix __btrfs_map_block on 32 bit machines
Recent changes for discard support didn't compile,
this fixes them not to try and % 64 bit numbers.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Sun, 27 Mar 2011 08:07:36 +0000 (16:07 +0800)]
btrfs: fix possible deadlock by clearing __GFP_FS flag
Using the GFP_HIGHUSER_MOVABLE flag to allocate the metadata's page may cause
deadlock.
Task1
open()
...
btrfs_search_slot()
...
btrfs_cow_block()
...
alloc_page()
wait for reclaiming
shrink_slab()
...
shrink_icache_memory()
...
btrfs_evict_inode()
...
btrfs_search_slot()
If the path is locked by task1, the deadlock happens.
So the btree's page cache is different with the file's page cache, it can not
allocate pages by GFP_HIGHUSER_MOVABLE flag, we must clear __GFP_FS flag in
GFP_HIGHUSER_MOVABLE flag.
Reported-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Al Viro [Fri, 4 Mar 2011 17:15:18 +0000 (17:15 +0000)]
btrfs: check link counter overflow in link(2)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Al Viro [Fri, 4 Mar 2011 17:14:37 +0000 (17:14 +0000)]
btrfs: don't mess with i_nlink of unlocked inode in rename()
old_inode is not locked; it's not safe to play with its link
count. Instead of bumping it and calling btrfs_unlink_inode(),
add a variant of the latter that does not do btrfs_drop_nlink()/
btrfs_update_inode(), call it instead of btrfs_inc_nlink()/
btrfs_unlink_inode() and do btrfs_update_inode() ourselves.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tsutomu Itoh [Tue, 1 Mar 2011 06:48:31 +0000 (06:48 +0000)]
Btrfs: check return value of btrfs_alloc_path()
Adding the check on the return value of btrfs_alloc_path() to several places.
And, some of callers are modified by this change.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This page took 0.044527 seconds and 5 git commands to generate.