Nick Clifton [Mon, 19 Apr 2021 16:38:39 +0000 (17:38 +0100)]
Fix a problem running the archiver program in MRI mode on archives containing LTO compiled objects.
PR 21702
* arsup.c (ar_addmod): Enable plugin support, if available.
Nick Clifton [Mon, 19 Apr 2021 16:36:43 +0000 (17:36 +0100)]
Fix an assembler testuite failure when checking a toolchain configured with --target=rs6000-aix3.3.
* testsuite/gas/all/gas.exp: Add rs6000*-*-aix* to the list of
targets which should skip the undefined symbols test.
Przemyslaw Wirkus [Mon, 19 Apr 2021 14:00:07 +0000 (15:00 +0100)]
aarch64: New instructions for maintenance of GPT entries cached in a TLB
This patch adds support to four new system registers (RPAOS, RPALOS, PAALLOS,
PAALL) in conjunction with TLBI instruction. This change is part of RME (Realm
Management Extension).
gas/ChangeLog:
2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update news.
* testsuite/gas/aarch64/rme.d: Update test.
* testsuite/gas/aarch64/rme.s: Update test.
opcodes/ChangeLog:
2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c: Add new registers (RPAOS, RPALOS, PAALLOS, PAALL) support for
TLBI instruction.
Przemyslaw Wirkus [Mon, 19 Apr 2021 13:54:46 +0000 (14:54 +0100)]
aarch64: Add new data cache maintenance operations
This patch adds support to two new system registers (CIPAPA, CIGDPAPA) in
conjunction with DC instruction. This change is part of RME (Realm Management
Extension).
gas/ChangeLog:
2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* testsuite/gas/aarch64/rme.d: Update test.
* testsuite/gas/aarch64/rme.s: Update test.
opcodes/ChangeLog:
2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c: Add new register (CIPAPA, CIGDPAPA) support for
DC instruction.
Jan Beulich [Mon, 19 Apr 2021 13:41:35 +0000 (15:41 +0200)]
arm64: add two initializers
Old enough gcc can't cope and would warn about the variables potentially
remaining uninitialized.
Tom Tromey [Mon, 19 Apr 2021 13:16:34 +0000 (07:16 -0600)]
Fix kfail patterns in inline-locals.exp
PR gdb/27742 points out that my recent change to
print_variable_and_value caused a regression in inline-locals.exp. I
can't reproduce this, but I came up with this patch based on the
output shown in the bug.
gdb/testsuite/ChangeLog
2021-04-19 Tom Tromey <tromey@adacore.com>
PR gdb/27742:
* gdb.opt/inline-locals.exp: Update kfail patterns.
Jan Beulich [Mon, 19 Apr 2021 11:28:35 +0000 (13:28 +0200)]
gas: drop sprint_value()
Its (documented) behavior is unhelpful in particular in 64-bit build
environments: While printing large 32-bit numbers in decimal already
isn't very meaningful to most people, this even more so goes for yet
larger 64-bit numbers. bfd_sprintf_vma() still tries to limit the number
of digits printed (without depending on a build system property), but
uniformly produces hex output.
Nick Clifton [Mon, 19 Apr 2021 08:41:04 +0000 (09:41 +0100)]
Fix compile time warning about unused functions.
binutils * rename.c: (get_stat_atime_ns): Add prototype.
(get_stat_mtime_ns): Add prototype.
Mike Frysinger [Mon, 19 Apr 2021 03:44:36 +0000 (23:44 -0400)]
sim: switch to AC_CHECK_HEADERS_ONCE
This avoids duplicate tests for headers between common m4, arches,
and any other sources that would trigger header tests.
Mike Frysinger [Mon, 19 Apr 2021 03:33:31 +0000 (23:33 -0400)]
sim: msp430: delete unused getopt.h probe
This port doesn't include it anywhere, so drop the test.
Mike Frysinger [Mon, 19 Apr 2021 02:48:31 +0000 (22:48 -0400)]
sim: moxie: switch syscalls to common nltvals
Rather than hand duplicate the syscall constants, switch to the
common nltvals framework. I made sure the constants have the
same values before & after too :).
Mike Frysinger [Mon, 19 Apr 2021 02:43:06 +0000 (22:43 -0400)]
sim: sh: switch syscalls to common nltvals
Rather than hand duplicate the syscall table, switch to the common
nltvals framework. We have to tweak the constant names, but we get
everything else for free. I made sure the constants have the same
values before & after too :).
Mike Frysinger [Mon, 19 Apr 2021 02:35:19 +0000 (22:35 -0400)]
sim: rx: switch syscalls to common nltvals
Rather than hand duplicate the syscall table, switch to the common
nltvals framework. We have to tweak the constant names, but we get
everything else for free. I made sure the constants have the same
values before & after too :).
Mike Frysinger [Mon, 19 Apr 2021 02:31:19 +0000 (22:31 -0400)]
sim: m32c: switch syscalls to common nltvals
Rather than hand duplicate the syscall table, switch to the common
nltvals framework. We have to tweak the constant names, but we get
everything else for free. I made sure the constants have the same
values before & after too :).
Mike Frysinger [Mon, 19 Apr 2021 02:24:37 +0000 (22:24 -0400)]
sim: iq2000: switch syscalls to common nltvals
Rather than hand duplicate the syscall table, switch to the common
nltvals framework. We have to tweak the constant names, but we get
everything else for free. I made sure the constants have the same
values before & after too :).
Mike Frysinger [Mon, 19 Apr 2021 01:50:07 +0000 (21:50 -0400)]
sim: switch to AC_CHECK_FUNCS_ONCE & merge a little
This avoids duplicate tests for functions between common m4, arches,
and any other sources that would trigger func tests.
Also manually delete known duplicate function tests between the m4,
bfin, and v850 ports.
Mike Frysinger [Mon, 19 Apr 2021 01:30:24 +0000 (21:30 -0400)]
sim: mn10300: delete unused func & header tests
These appear to have been blindly copied from the v850 port many years
ago as the code has never been used. Just delete it all and be done.
Mike Frysinger [Mon, 19 Apr 2021 00:53:03 +0000 (20:53 -0400)]
sim: syscall: add getpid support
Hoist the Blackfin implementation up to the common one.
Mike Frysinger [Mon, 19 Apr 2021 01:13:34 +0000 (21:13 -0400)]
sim: d10v: fix build warnings
The printf fix uses our PRIxTA for our sim address type.
Then cast away the const (since the underlying code safely treats it
as such) even if it's ugly.
Finally touch up the argv iterator pointer to match the new func arg.
With this tidied up, we can delete the SIM_AC_OPTION_WARNINGS(no) call
to get the default common behavior where -Werror is enabled.
Mike Frysinger [Mon, 19 Apr 2021 01:01:00 +0000 (21:01 -0400)]
sim: cr16: fix build warnings
The printf fix is obvious enough, but the hash one is a real bug:
cr16/interp.c: In function 'sim_open':
cr16/interp.c:560:17: error: 'h' may be used uninitialized in this function [-Werror=maybe-uninitialized]
560 | h = h->next;
| ~~^~~~~~~~~
It happens to not cause a problem currently because the first entry in
the generated table that this loop operates matches a codepath where h
is initialized. Then when later entries don't match, the previous value
is pointing at the end of a valid hash table already, and the rest of
the code does nothing.
With this tidied up, we can delete the SIM_AC_OPTION_WARNINGS(no) call
to get the default common behavior where -Werror is enabled.
GDB Administrator [Mon, 19 Apr 2021 00:00:13 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 18 Apr 2021 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Sat, 17 Apr 2021 19:56:36 +0000 (13:56 -0600)]
Handle unaligned mapping of .gdb_index
The .gdb_index was designed such that all data would be aligned.
Unfortunately, we neglected to require this alignment in the objcopy
instructions in the manual. As a result, in many cases, a .gdb_index
in the wild will not be properly aligned by mmap. This yields
undefined behavior, which is PR gdb/23743.
This patch fixes the bug by always assuming that the mapping is
unaligned, and using extract_unsigned_integer when needed. A new
helper class is introduced to make this less painful.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
PR gdb/23743:
* dwarf2/read.c (class offset_view): New.
(struct symbol_table_slot): Remove.
(struct mapped_index) <symbol_table, constant_pool>: Change type.
<symbol_name_index, symbol_vec_index>: New methods.
<symbol_name_slot_invalid, symbol_name_at, symbol_name_count>:
Rewrite.
(read_gdb_index_from_buffer): Update.
(struct dw2_symtab_iterator) <vec>: Change type.
(dw2_symtab_iter_init_common, dw2_symtab_iter_init)
(dw2_symtab_iter_next, dw2_expand_marked_cus): Update.
* dwarf2/index-write.c (class data_buf) <append_data>: Remove.
<append_array, append_offset>: New methods.
(write_hash_table, add_address_entry, write_gdbindex_1)
(write_debug_names): Update.
* dwarf2/index-common.h (byte_swap, MAYBE_SWAP): Remove.
Tom Tromey [Sat, 17 Apr 2021 19:40:04 +0000 (13:40 -0600)]
Avoid crash in write_psymtabs_to_index
If I try "save gdb-index" using the executable from
gdb.cp/cmpd-minsyms.exp, gdb will crash. This happens due to a
missing NULL check.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* dwarf2/index-write.c (write_psymtabs_to_index): Check
partial_symtabs.
gdb/testsuite/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* gdb.dwarf2/gdb-index-nodebug.exp: New file.
Tom Tromey [Sat, 17 Apr 2021 15:35:04 +0000 (09:35 -0600)]
Simplify quick_symbol_functions::map_matching_symbols
quick_symbol_functions::map_matching_symbols is only used by the Ada
code. Currently, it both expands certain psymtabs and then walks over
the full symtabs -- including any already-expanded ones -- calling a
callback.
It appears to work lazily as well, in that if the callback returns
false, iteration stops. However, only the psymtab implementation does
this; the DWARF index implementations are not lazy. It turns out,
though, that the only callback that is ever passed here never returns
false.
This patch simplifies this method by removing the callback. The
method is also renamed. In the new scheme, the caller is responsible
for walking the full symtabs, which removes some redundancy as well.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* psymtab.c (psymbol_functions::expand_matching_symbols): Rename
from map_matching_symbols. Change parameters.
* psympriv.h (struct psymbol_functions) <expand_matching_symbols>:
Rename from map_matching_symbols. Change parameters.
* dwarf2/read.c (struct dwarf2_gdb_index)
<expand_matching_symbols>: Rename from map_matching_symbols.
Change parameters.
(struct dwarf2_debug_names_index) <expand_matching_symbols>:
Rename from map_matching_symbols. Change parameters.
(dwarf2_gdb_index::expand_matching_symbols): Rename from
dw2_map_matching_symbols. Change parameters.
(dwarf2_gdb_index::expand_matching_symbols): Remove old
implementation.
(dwarf2_debug_names_index::expand_matching_symbols): Rename from
map_matching_symbols. Change parameters.
* objfiles.h (struct objfile) <expand_matching_symbols>: Rename
from map_matching_symbols. Change parameters.
* symfile-debug.c (objfile::expand_matching_symbols): Rename from
map_matching_symbols. Change parameters.
* ada-lang.c (map_matching_symbols): New function.
(add_nonlocal_symbols): Update.
Tom Tromey [Sat, 17 Apr 2021 15:35:04 +0000 (09:35 -0600)]
Remove quick_symbol_functions::expand_symtabs_with_fullname
This removes quick_symbol_functions::expand_symtabs_with_fullname,
replacing it with a call to expand_symtabs_matching. As with the
previous patches, the implementation is consolidated in the objfile
method.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* quick-symbol.h (struct quick_symbol_functions)
<expand_symtabs_with_fullname>: Remove.
* psymtab.c (psymbol_functions::expand_symtabs_with_fullname):
Remove.
* psympriv.h (struct psymbol_functions)
<expand_symtabs_with_fullname>: Remove.
* dwarf2/read.c (struct dwarf2_base_index_functions)
<expand_symtabs_with_fullname>: Remove.
(dwarf2_base_index_functions::expand_symtabs_with_fullname):
Remove.
* objfiles.h (struct objfile) <expand_symtabs_with_fullname>:
Update comment.
* symfile-debug.c (objfile::expand_symtabs_with_fullname):
Rewrite.
Tom Tromey [Sat, 17 Apr 2021 15:35:04 +0000 (09:35 -0600)]
Remove quick_symbol_functions::expand_symtabs_for_function
This removes quick_symbol_functions::expand_symtabs_for_function,
replacing it with a call to expand_symtabs_matching. As with the
previous patches, the implementation is consolidated in the objfile
method.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* symfile-debug.c (objfile::expand_symtabs_for_function):
Rewrite.
* quick-symbol.h (struct quick_symbol_functions)
<expand_symtabs_for_function>: Remove.
* psymtab.c (psymbol_functions::expand_symtabs_for_function):
Remove.
* psympriv.h (struct psymbol_functions)
<expand_symtabs_for_function>: Remove.
* objfiles.h (struct objfile) <expand_symtabs_for_function>:
Update comment.
* dwarf2/read.c (struct dwarf2_gdb_index)
<expand_symtabs_for_function>: Remove.
(struct dwarf2_debug_names_index) <expand_symtabs_for_function>:
Remove.
(find_slot_in_mapped_hash): Remove.
(dw2_symtab_iter_init_common): Merge with dw2_symtab_iter_init.
(dw2_symtab_iter_init): Remove one overload.
(dwarf2_gdb_index::expand_symtabs_for_function)
(dwarf2_debug_names_index::expand_symtabs_for_function): Remove.
Tom Tromey [Sat, 17 Apr 2021 15:35:04 +0000 (09:35 -0600)]
Remove quick_symbol_functions::map_symtabs_matching_filename
This replaces quick_symbol_functions::map_symtabs_matching_filename
with a call to expand_symtabs_matching. As with the previous patch,
rather than update all callers, the implementation is consolidated in
objfile::map_symtabs_matching_filename.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* symfile-debug.c (objfile::map_symtabs_matching_filename):
Rewrite.
* quick-symbol.h (struct quick_symbol_functions)
<map_symtabs_matching_filename>: Remove.
* psymtab.c (partial_map_expand_apply)
(psymbol_functions::map_symtabs_matching_filename): Remove.
* psympriv.h (struct psymbol_functions)
<map_symtabs_matching_filename>: Remove.
* objfiles.h (struct objfile) <map_symtabs_matching_filename>:
Update comment.
* dwarf2/read.c (struct dwarf2_base_index_functions)
<map_symtabs_matching_filename>: Remove.
(dw2_map_expand_apply)
(dwarf2_base_index_functions::map_symtabs_matching_filename):
Remove.
Tom Tromey [Sat, 17 Apr 2021 15:35:04 +0000 (09:35 -0600)]
Remove quick_symbol_functions::lookup_symbol
This removes quick_symbol_functions, replacing it with calls to
expand_symtabs_matching. Because the replacement is somewhat verbose,
objfile::lookup_symbol is not removed. This consolidates some
duplicated code into this one spot.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* symfile-debug.c (objfile::lookup_symbol): Rewrite.
* quick-symbol.h (struct quick_symbol_functions) <lookup_symbol>:
Remove.
* psymtab.c (psymbol_functions::lookup_symbol): Remove.
* psympriv.h (struct psymbol_functions) <lookup_symbol>: Remove.
* objfiles.h (struct objfile) <lookup_symbol>: Add comment.
* dwarf2/read.c (struct dwarf2_gdb_index) <lookup_symbol>:
Remove.
(struct dwarf2_debug_names_index) <lookup_symbol>: Remove.
(dwarf2_gdb_index::lookup_symbol)
(dwarf2_debug_names_index::lookup_symbol): Remove.
Tom Tromey [Sat, 17 Apr 2021 15:35:04 +0000 (09:35 -0600)]
Add 'domain' parameter to expand_symtabs_matching
Currently, expand_symtabs_matching only accepts a search_domain
parameter. However, lookup_symbol uses a domain_enum instead, and the
two, confusingly, do quite different things -- one cannot emulate the
other. So, this patch adds a domain_enum parameter to
expand_symtabs_matching, with UNDEF_DOMAIN used as a wildcard.
This is another step toward replacing lookup_symbol with
expand_symtabs_matching.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* symtab.c (global_symbol_searcher::expand_symtabs): Update.
* symmisc.c (maintenance_expand_symtabs): Update.
* symfile.c (expand_symtabs_matching): Update.
* symfile-debug.c (objfile::expand_symtabs_matching): Add 'domain'
parameter.
* quick-symbol.h (struct quick_symbol_functions)
<expand_symtabs_matching>: Add 'domain' parameter.
* psymtab.c (recursively_search_psymtabs)
(psymbol_functions::expand_symtabs_matching): Add 'domain'
parameter.
* psympriv.h (struct psymbol_functions) <expand_symtabs_matching>:
Add 'domain' parameter.
* objfiles.h (struct objfile) <expand_symtabs_matching>: Add
'domain' parameter.
* linespec.c (iterate_over_all_matching_symtabs): Update.
* dwarf2/read.c (struct dwarf2_gdb_index)
<expand_symtabs_matching>: Add 'domain' parameter.
(struct dwarf2_debug_names_index) <expand_symtabs_matching>: Add
'domain' parameter.
(dw2_expand_symtabs_matching)
(dwarf2_gdb_index::expand_symtabs_matching)
(dw2_debug_names_iterator)
(dwarf2_debug_names_index::expand_symtabs_matching): Add 'domain'
parameter.
Tom Tromey [Sat, 17 Apr 2021 15:35:04 +0000 (09:35 -0600)]
Add search_flags to expand_symtabs_matching
This adds a block search flags parameter to expand_symtabs_matching.
All callers are updated to search both the static and global blocks,
as that was the implied behavior before this patch.
This is a step toward replacing lookup_symbol with
expand_symtabs_matching.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* symtab.c (global_symbol_searcher::expand_symtabs)
(default_collect_symbol_completion_matches_break_on): Update.
* symmisc.c (maintenance_expand_symtabs): Update.
* symfile.h (expand_symtabs_matching): Add search_flags
parameter.
* symfile.c (expand_symtabs_matching): Add search_flags
parameter.
* symfile-debug.c (objfile::expand_symtabs_matching): Add
search_flags parameter.
* quick-symbol.h (struct quick_symbol_functions)
<expand_symtabs_matching>: Add search_flags parameter.
* python/py-symbol.c (gdbpy_lookup_static_symbols): Update.
* psymtab.c (recursively_search_psymtabs)
(psymbol_functions::expand_symtabs_matching): Add search_flags
parameter.
* psympriv.h (struct psymbol_functions) <expand_symtabs_matching>:
Add search_flags parameter.
* objfiles.h (struct objfile) <expand_symtabs_matching>: Add
search_flags parameter.
* linespec.c (iterate_over_all_matching_symtabs): Update.
* dwarf2/read.c (struct dwarf2_gdb_index)
<expand_symtabs_matching>: Add search_flags parameter.
(struct dwarf2_debug_names_index) <expand_symtabs_matching>: Add
search_flags parameter.
(dw2_map_matching_symbols): Update.
(dw2_expand_marked_cus, dw2_expand_symtabs_matching)
(dwarf2_gdb_index::expand_symtabs_matching): Add search_flags
parameter.
(dw2_debug_names_iterator): Change block_index to search flags.
<m_block_index>: Likewise.
(dw2_debug_names_iterator::next)
(dwarf2_debug_names_index::lookup_symbol)
(dwarf2_debug_names_index::expand_symtabs_for_function)
(dwarf2_debug_names_index::map_matching_symbols)
(dwarf2_debug_names_index::map_matching_symbols): Update.
(dwarf2_debug_names_index::expand_symtabs_matching): Add
search_flags parameter.
* ada-lang.c (ada_add_global_exceptions)
(collect_symbol_completion_matches): Update.
Tom Tromey [Sat, 17 Apr 2021 15:35:04 +0000 (09:35 -0600)]
Let expand_symtabs_matching short-circuit
This changes expand_symtabs_exp_notify_ftype to return bool, and
updates all the uses. Now, if the notification function returns
false, the call is short-circuited and stops examining symtabs. This
is a step toward replacing map_symtabs_matching_filename with
expand_symtabs_matching.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* symtab.c (default_collect_symbol_completion_matches_break_on):
Update.
* symfile.h (expand_symtabs_matching): Return bool.
* symfile.c (expand_symtabs_matching): Return bool.
* symfile-debug.c (objfile::expand_symtabs_matching): Return
bool.
* quick-symbol.h (expand_symtabs_exp_notify_ftype): Return bool.
(struct quick_symbol_functions) <expand_symtabs_matching>: Return
bool.
* psymtab.c (psymbol_functions::expand_symtabs_matching): Return
bool.
* psympriv.h (struct psymbol_functions)
<expand_symtabs_matching>: Return bool.
* objfiles.h (struct objfile) <expand_symtabs_matching>: Return
bool.
* dwarf2/read.c (struct dwarf2_gdb_index)
<expand_symtabs_matching>: Return bool.
(struct dwarf2_debug_names_index) <expand_symtabs_matching>:
Return bool.
(dw2_expand_symtabs_matching_symbol): Return bool.
(dw2_expand_symtabs_matching_one, dw2_expand_marked_cus)
(dw2_expand_symtabs_matching)
(dwarf2_gdb_index::expand_symtabs_matching)
(dwarf2_debug_names_index::expand_symtabs_matching)
(dwarf2_debug_names_index::expand_symtabs_matching): Return bool.
Tom Tromey [Sat, 17 Apr 2021 15:35:04 +0000 (09:35 -0600)]
Add block_search_flags
This adds block_search_flags, a flag enum. This will be used to by
certain search functions so that the caller can control which blocks
are searched more precisely.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* quick-symbol.h (enum block_search_flag_values): New.
(block_search_flags): New enum flags type.
GDB Administrator [Sat, 17 Apr 2021 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Fri, 16 Apr 2021 22:34:07 +0000 (16:34 -0600)]
Rewrite the Rust expression parser
The Rust expression parser was written to construct its own AST, then
lower this to GDB expressions. I did this primarily because the old
expressions were difficult to work with; after rewriting those, I
realized I could remove the AST from the Rust parser.
After looking at this, I realized it might be simpler to rewrite the
parser. This patch reimplements it as a recursive-descent parser. I
kept a fair amount of the existing code -- the lexer is pulled in
nearly unchanged.
There are several benefits to this approach:
* The parser is shorter now (from 2882 LOC to 2351).
* The parser is just ordinary C++ code that can be debugged in the
usual way.
* Memory management in the parser is now straightforward, as
parsing methods simply return a unique pointer or vector.
This required a couple of minor changes to the test suite, as some
errors have changed.
While this passes the tests, it's possible there are lurking bugs,
particularly around error handling.
gdb/ChangeLog
2021-04-16 Tom Tromey <tom@tromey.com>
* rust-parse.c: New file.
* rust-exp.y: Remove.
* Makefile.in (COMMON_SFILES): Add rust-parse.c.
(SFILES): Remove rust-exp.y.
(YYFILES, local-maintainer-clean): Remove rust-exp.c.
gdb/testsuite/ChangeLog
2021-04-16 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Change error text.
* gdb.rust/expr.exp: Change error text.
Tom Tromey [Fri, 16 Apr 2021 22:34:07 +0000 (16:34 -0600)]
Fix syntax error in Rust test
The Rust test case simple.exp does:
print slice as &[i32][0]
However, this is a syntax error in Rust. Parens are needed around the
"as".
gdb/testsuite/ChangeLog
2021-04-16 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Add parens to 'as' test.
Simon Marchi [Fri, 16 Apr 2021 15:01:26 +0000 (11:01 -0400)]
gdb/testsuite: use -gdwarf-4 in simavr board
By default, when using the -g switch, avr-gcc generates stabs debug
information. I think it would make more sense to test GDB against DWARF
information, because stabs is obsolete by now, and nobody work on it.
So change the simavr board to pass -gdwarf-4 as the debug flag.
The downside is that users are probably more likely to use just -g, so
we don't test GDB the same way as users are likely to use it. But in
this case, if somebody comes and asks for help with GDB for AVR, I
suggest we encourage them to use -gdwarf-4.
I can't give stats about how that changes test results, because the
testsuite is too broken. There is an internal error that happens quite
frequently that needs to be investigated:
/home/simark/src/wt/avr/gdb/trad-frame.h:143: internal-error: LONGEST trad_frame_saved_reg::addr() const: Assertion `m_kind == trad_frame_saved_reg_kind::ADDR' failed.
I sent a question on the gcc mailing list, asking why stabs is the
default:
https://gcc.gnu.org/pipermail/gcc/2021-April/235309.html
gdb/testsuite/ChangeLog:
* boards/simavr.exp: Set debug_flags.
Change-Id: I70e471fad3a79ab1d79d13dda8436bb9eb666e0a
Przemyslaw Wirkus [Fri, 16 Apr 2021 14:33:38 +0000 (15:33 +0100)]
aarch64: Define RME system registers
This patch introduces RME (Realm Management Extension) system registers.
gas/ChangeLog:
2021-03-01 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* testsuite/gas/aarch64/rme-invalid.d: New test.
* testsuite/gas/aarch64/rme-invalid.l: New test.
* testsuite/gas/aarch64/rme-invalid.s: New test.
* testsuite/gas/aarch64/rme.d: New test.
* testsuite/gas/aarch64/rme.s: New test.
opcodes/ChangeLog:
2021-03-01 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c: Add RME system registers.
Luis Machado [Wed, 14 Apr 2021 14:20:18 +0000 (11:20 -0300)]
Print bfloat16 DWARF types correctly
Even if the DWARF information contains a bfloat16 base type (__bf16), a
variable of such type will still be printed using the IEEE half float format,
which is wrong.
This patch teaches GDB how to pick the bfloat16 format for __bf16 types in
DWARF (based on the base type name) and uses IEEE half float for all the other
16-bit float formats.
Tested on aarch64-linux/x86_64-linux.
OK?
gdb/ChangeLog:
2021-04-16 Luis Machado <luis.machado@linaro.org>
* arch-utils.c (default_floatformat_for_type): Handle bfloat16.
gdb/testsuite:
2021-04-16 Luis Machado <luis.machado@linaro.org>
* gdb.dwarf2/dw2-bfloat16.exp: New file.
Alan Modra [Fri, 16 Apr 2021 12:59:05 +0000 (22:29 +0930)]
PR27567, Linking PE files adds alignment section flags to executables
So don't set those flags for an executable. In the patch I also test
DYNAMIC even though the PE bfd code doesn't appear to set it for dlls.
I figure it doesn't hurt to include that flag too.
PR 27567
bfd/
* coffcode.h (styp_to_sec_flags): Use an unsigned long styp_flags.
(coff_write_object_contents): Pass bfd to COFF_ENCODE_ALIGNMENT,
ignore alignment checks when return is false. Formatting.
include/
* coff/internal.h (struct internal_scnhdr): Make s_flags unsigned long.
* coff/pe.h (COFF_ENCODE_ALIGNMENT): Don't set align flags for an
executable and return false. Do so for a relocatable object and
evaluate to true.
* coff/ti.h (COFF_ENCODE_ALIGNMENT): Add bfd arg and evaluate to true.
(COFF_DECODE_ALIGNMENT): Formatting.
* coff/z80.h (COFF_ENCODE_ALIGNMENT): Similarly.
(COFF_DECODE_ALIGNMENT): Similarly.
Nelson Chu [Fri, 16 Apr 2021 06:50:32 +0000 (14:50 +0800)]
RISC-V: PR27436, make operand C> work the same as >.
gas/
PR 27436
* config/tc-riscv.c (riscv_ip): make operand C> work the same as >.
* testsuite/gas/riscv/shamt-32.d: New testcase.
* testsuite/gas/riscv/shamt-32.l: Likewise.
* testsuite/gas/riscv/shamt-32.s: Likewise.
* testsuite/gas/riscv/shamt-64.d: Likewise.
* testsuite/gas/riscv/shamt-64.l: Likewise.
* testsuite/gas/riscv/shamt-64.s: Likewise.
Nelson Chu [Fri, 16 Apr 2021 08:48:27 +0000 (16:48 +0800)]
Update the ChangeLog, and add the missing entries.
Lifang Xia [Thu, 15 Apr 2021 02:51:14 +0000 (10:51 +0800)]
RISC-V: compress "addi d,CV,z" to "c.mv d,CV"
PR 27732
gas/
* testsuite/gas/riscv/c-zero-imm.d: Compress addi a4,a4,0 to
c.mv a4,a4.
* testsuite/gas/riscv/c-zero-imm.s: Likewise.
opcodes/
* riscv-opc.c (riscv_opcodes): New insn alias for addi. Compress
"addi d,CV,z" to "c.mv d,CV".
Alan Modra [Fri, 16 Apr 2021 02:42:50 +0000 (12:12 +0930)]
undefined reference to get_stat_atime
PR 27725
* rename.c (get_stat_atime, get_stat_mtime): Make static.
(get_stat_atime_ns, get_stat_mtime_ns): Likewise.
GDB Administrator [Fri, 16 Apr 2021 00:00:17 +0000 (00:00 +0000)]
Automatic date update in version.in
John Baldwin [Thu, 15 Apr 2021 23:03:15 +0000 (16:03 -0700)]
sim erc32: Add include path for readline.
Add a READLINE_CFLAGS variable which adds the include path to the
in-tree readline when using the in-tree readline library.
sim/erc32/ChangeLog:
* Makefile.in (READLINE_SRC, READLINE_CFLAGS): Add.
(SIM_EXTRA_CFLAGS): Add READLINE_CFLAGS.
* configure: Rebuild.
* configure.ac (READLINE_CFLAGS): Add.
John Baldwin [Thu, 15 Apr 2021 23:03:15 +0000 (16:03 -0700)]
sim mn10300: Fix igen generation.
Only pass the top-level instruction decode table (mn10300.igen) to
igen via -i. The additional files passed previously caused igen to
exit its getopt loop in main and exit silently without generating any
output. In addition, when am33-2.igen was added, it was not included
from mn10300.igen, so was never used.
sim/mn10300/ChangeLog:
* Makefile.in: (tmp-igen) Only pass mn10300.igen to igen.
* mn10300.igen: Include am33-2.igen.
John Baldwin [Thu, 15 Apr 2021 23:03:15 +0000 (16:03 -0700)]
sim lm32: Use a known-good shell with genmloop.sh.
Explicitly use a known-good shell found by autoconf for executing
additional scripts in genmloop.sh rather than the building user's
shell.
sim/lm32/ChangeLog:
* Makefile.in: Pass -shell to genmloop.sh.
John Baldwin [Thu, 15 Apr 2021 23:03:15 +0000 (16:03 -0700)]
sim frv: Add a missing return value for frvbf_check_acc_range.
Claim that the accumulator indices are out of range without raising an
exception if the CPU doesn't support media instructions.
sim/frv/ChangeLog:
* traps.c (frvbf_check_acc_range): Add missing return value.
John Baldwin [Thu, 15 Apr 2021 23:03:15 +0000 (16:03 -0700)]
sim: Add SIM_EXTRA_CFLAGS after CSEARCH.
The bfin sim adds include paths for the SDL libraries. These include
paths might include headers for different version of binutils. Move
SIM_EXTRA_CFLAGS after CSEARCH to ensure local includes are always
preferred to external includes.
sim/common/ChangeLog:
* Make-common.in (CONFIG_CFLAGS): Remove SIM_EXTRA_CFLAGS.
(ALL_CLAGS, COMMON_DEP_CFLAGS): Add SIM_EXTRA_CFLAGS after
CSEARCH.
John Baldwin [Thu, 15 Apr 2021 22:39:52 +0000 (15:39 -0700)]
gdb fbsd-nat: Use new-style debug macros
gdb/ChangeLog:
* fbsd-nat.c (fbsd_lwp_debug_printf, fbsd_nat_debug_printf): New,
use throughout file.
Andrew Burgess [Thu, 15 Apr 2021 20:32:57 +0000 (21:32 +0100)]
gdb/testsuite: don't include paths in test names
Give a test a proper name in order to avoid including a path in the
test name.
gdb/testsuite/ChangeLog:
* gdb.python/py-parameter.exp: Give a test a proper name to avoid
including a path in the test name.
Simon Marchi [Thu, 15 Apr 2021 18:45:47 +0000 (14:45 -0400)]
gdb/testsuite: use foreach_with_prefix in gdb.threads/fork-plus-threads.exp
I noticed that using foreach_with_prefix could make things a bit
less verbose. No changes in behavior expected.
gdb/testsuite/ChangeLog:
* gdb.threads/fork-plus-threads.exp: Use foreach_with_prefix.
Change-Id: I06aa6e3d10a9cfb6ada11547aefe8c70b636ac81
Tom Tromey [Thu, 15 Apr 2021 16:14:11 +0000 (10:14 -0600)]
Avoid crash in Ada value printing with optimized-out array
The Ada value-printing code could crash when printing an array which
had been optimized out.
The crash is difficult to reproduce, but I did manage to write a test
that at least shows that the previous behavior was incorrect -- before
the patch, the array is printed as if it is valid and every value is 0.
gdb/ChangeLog
2021-04-15 Tom Tromey <tromey@adacore.com>
* ada-valprint.c (ada_value_print_array): Handle optimized-out
arrays.
gdb/testsuite/ChangeLog
2021-04-15 Tom Tromey <tromey@adacore.com>
* gdb.dwarf2/arr-stride.exp: Add test.
Tom Tromey [Thu, 15 Apr 2021 16:14:11 +0000 (10:14 -0600)]
Use common_val_print_checked in print_variable_and_value
GDB was crashing in "bt full" for a large Ada program. I tracked this
down to a combination of bugs.
The first bug, fixed here, is that print_variable_and_value calls
common_val_print. Normally only the value-printing implementation
should call this; from the top level, common_val_print_checked is
preferred, because it correctly handles values that are wholly
optimized out.
I wasn't able to write a test case for this.
gdb/ChangeLog
2021-04-15 Tom Tromey <tromey@adacore.com>
* printcmd.c (print_variable_and_value): Use
common_val_print_checked.
Tom Tromey [Thu, 15 Apr 2021 16:05:00 +0000 (10:05 -0600)]
Use block_symbol in var_value_operation
I noticed that var_value_operation takes a block and a symbol, and
most callers destructure a block_symbol to pass in. It seems better
for this class to simply hold a block_symbol instead.
Tested on x86-64 Fedora 32.
gdb/ChangeLog
2021-04-15 Tom Tromey <tromey@adacore.com>
* rust-exp.y (rust_parser::convert_ast_to_expression): Update.
* parse.c (parser_state::push_symbol, parser_state::push_dollar):
Update.
* p-exp.y (variable): Update.
* m2-exp.y (variable): Update.
* go-exp.y (variable): Update.
* expprint.c (dump_for_expression): New overload.
* expop.h (check_objfile): New overload.
(check_constant): New overload.
(class var_value_operation): Use block_symbol.
<get_symbol>: Rewrite.
* eval.c (var_value_operation::evaluate)
(var_value_operation::evaluate_funcall)
(var_value_operation::evaluate_for_address)
(var_value_operation::evaluate_for_address)
(var_value_operation::evaluate_with_coercion)
(var_value_operation::evaluate_for_sizeof)
(var_value_operation::evaluate_for_cast): Update.
* d-exp.y (PrimaryExpression): Update.
* c-exp.y (variable): Update.
* ax-gdb.c (var_value_operation::do_generate_ax): Update.
* ada-lang.c (ada_var_value_operation::evaluate_for_cast)
(ada_var_value_operation::evaluate)
(ada_var_value_operation::resolve)
(ada_funcall_operation::resolve): Update.
* ada-exp.y (write_var_from_sym, write_object_renaming)
(write_ambiguous_var, write_var_or_type, write_name_assoc)
(maybe_overload): Update.
* ada-exp.h (class ada_var_value_operation) <get_block>: Rewrite.
Pekka Seppänen [Thu, 15 Apr 2021 14:37:28 +0000 (00:07 +0930)]
PR27734, get_stat_atime_ns/get_stat_mtime_ns might not use parameter
PR 27725
* rename.c (get_stat_atime_ns): Add ATTRIBUTE_UNUSED.
(get_stat_mtime_ns): Likewise.
Tom Tromey [Sun, 5 Jul 2020 19:02:40 +0000 (13:02 -0600)]
gdb: add "set startup-quietly" command
This adds a new command to change GDB to behave as though "-quiet"
were always given. This new command can be added to the gdbearlyinit
file to affect future GDB sessions.
gdb/ChangeLog:
* NEWS: Add entry.
* main.c (captured_main_1): Call check_quiet_mode.
* top.c (startup_quiet): New global.
(check_quiet_mode): New function.
(show_startup_quiet): New function.
(init_main): Register new command.
* top.h (check_quiet_mode): Declare.
gdb/doc/ChangeLog:
* gdb.texinfo (Mode Options): Mention "set startup-quietly".
gdb/testsuite/ChangeLog:
* gdb.base/startup-file.exp: Add more tests.
Andrew Burgess [Fri, 25 Sep 2020 15:28:05 +0000 (16:28 +0100)]
gdb: process early initialization files and command line options
Adds the ability to process commands at a new phase during GDB's
startup. This phase is earlier than the current initialisation file
processing, before GDB has produced any output.
The number of commands that can be processed at this early stage will
be limited, and it is expected that the only commands that would be
processed at this stage will relate to some of the fundamentals of how
GDB starts up.
Currently the only commands that it makes sense to add to this early
initialization file are those like 'set style version ....' as the
version string is displayed during startup before the standard
initialization files are parsed. As such this commit fully resolved
bug cli/25956.
This commit adds a mechanism to execute these early initialization
files from a users HOME directory, as well as some corresponding
command line flags for GDB.
The early initialization files that GDB will currently check for are
~/.config/gdb/gdbearlyinit (on Linux like systems) or ~/.gdbearlyinit
if the former is not found.
The output of 'gdb --help' has been extended to include a list of the
early initialization files being processed.
gdb/ChangeLog:
PR cli/25956
* NEWS: Mention new early init files and command line options.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Define GDBEARLYINIT.
* main.c (get_earlyinit_files): New function.
(enum cmdarg_kind): Add CMDARG_EARLYINIT_FILE and
CMDARG_EARLYINIT_COMMAND.
(captured_main_1): Add support for new command line flags, and for
processing startup files.
(print_gdb_help): Include startup files in the output.
gdb/doc/ChangeLog:
PR cli/25956
* gdb.texinfo (File Options): Mention new command line options.
(Startup): Discuss when early init files are processed.
(Initialization Files): Add description of early init files.
(Output Styling): Update description of 'version' style.
(gdb man): Mention early init files.
gdb/testsuite/ChangeLog:
PR cli/25956
* gdb.base/early-init-file.c: New file.
* gdb.base/early-init-file.exp: New file.
* lib/gdb-utils.exp (style): Handle style 'none'.
Andrew Burgess [Thu, 14 Jan 2021 14:32:35 +0000 (14:32 +0000)]
gdb: refactor the initialization file lookup code
In preparation for the next patch, which adds startup files, this
commit refactors the code for looking up the initialization files so
that the code can be more easily reused in the next commit.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* main.c (relocate_gdbinit_path_maybe_in_datadir): Rename to...
(relocate_file_path_maybe_in_datadir): ...this.
(class gdb_initfile_finder): New class.
(get_init_files): Now uses gdb_initfile_finder.
(print_gdb_help): Print 'None found' when there are no init files.
Alan Modra [Wed, 14 Apr 2021 15:06:42 +0000 (00:36 +0930)]
PR27725, better objcopy -p times
Nanosecond rather than second resolution.
PR 27725
* configure.ac: Check for sys/time.h and utimensat. Use standard
checks for mkstemp and mkdtemp. Whitespace. Check for nanosecond
members of struct stat.
* rename.c: Prefer sys/time.h for utimes over utime.h for utime.
(STAT_TIMESPEC, STAT_TIMESPEC_NS): Define
(get_stat_atime_ns, get_stat_mtime_ns): New inline functions.
(get_stat_atime, get_stat_mtime): Likewise.
(set_times): Choose first available of utimensat, utimes, utime.
Use above inline functions to set timespec and timeval values.
* configure: Regenerate.
* config.in: Regenerate.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Add test of
file timestamp when --preserve-dates is used.
Alan Modra [Wed, 14 Apr 2021 16:03:13 +0000 (01:33 +0930)]
Make objcopy -p work when an output file is specified
More fallout from the PR27456 fixes.
PR 27456
* rename.c (smart_rename): When TO and FROM are equal, just set
file timestamp.
* objcopy.c (strip_main, copy_main): Always call smart_rename.
Nelson Chu [Wed, 14 Apr 2021 02:00:05 +0000 (10:00 +0800)]
RISC-V: PR27584, surpress local and empty name symbols for nm.
The local ".L0" symbol are usually generated to mark where the
auipc instruction is, and clang also uses ".LBB" to do the same
thing. Besides, clang also uses the empty name symbols for label
differences. Arm surpress their mapping symbols by regarding them
as special symbols, and MIPS surpress all local symbols. Therefore,
RISC-V probably need to surpress the local and empty name symbols
for nm and related tools. User can use "--special-syms" to show
these surpressed symbols.
bfd/
PR27584
* elfnn-riscv.c (riscv_elf_is_target_special_symbol): Added to
omit local and empty symbols since they usually generated to
mark the auipc instructions.
Lifang Xia [Wed, 14 Apr 2021 09:18:13 +0000 (17:18 +0800)]
CSKY: Fix special_function in howto table
The special_function for reloc should be 'bfd_elf_generic_reloc',
reloc list:
R_CKCORE_PCREL_IMM16BY2,
R_CKCORE_PCREL_IMM16BY4,
R_CKCORE_PCREL_IMM10BY4,
R_CKCORE_PCREL_IMM18BY2,
R_CKCORE_PCREL_FLRW_IMM8BY4
bfd/
* elf32-csky.c (csky_elf_howto_table)
<R_CKCORE_PCREL_IMM16BY2>: Set special_function to
bfd_elf_generic_reloc.
<R_CKCORE_PCREL_IMM16BY4>: Likewise.
<R_CKCORE_PCREL_IMM10BY4>: Likewise.
<R_CKCORE_PCREL_IMM18BY2>: Likewise.
<R_CKCORE_PCREL_FLRW_IMM8BY4>: Likewise.
GDB Administrator [Thu, 15 Apr 2021 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
Tankut Baris Aktemur [Wed, 14 Apr 2021 17:03:59 +0000 (19:03 +0200)]
testsuite, dwarf2: use @DW_INL_declared_inlined in a test
gdb/testsuite/ChangeLog:
2021-04-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.dwarf2/dw2-inline-with-lexical-scope.exp: Use
@DW_INL_declared_inlined for the inline attribute.
Tankut Baris Aktemur [Mon, 8 Feb 2021 15:48:39 +0000 (16:48 +0100)]
gdb/dwarf2: fix "info locals" for clang-compiled inlined functions
GDB reports duplicate local vars with "<optimized out>" values for
inlined functions that are compiled with Clang.
Suppose we have
__attribute__((always_inline))
static void aFunction() {
int a = 42;
if(a > 2) {
int value = a;
value += 10; /* break here */
}
}
The "info locals" command at the "break here" line gives the following
output:
...
Breakpoint 1, aFunction () at test.c:6
6 value += 10; /* break here */
(gdb) info locals
value = 42
a = 42
value = <optimized out>
(gdb)
The reason is, inlined functions that are compiled by Clang do not
contain DW_AT_abstract_origin attributes in the DW_TAG_lexical_block
entries. See
https://bugs.llvm.org/show_bug.cgi?id=49953
E.g. the DIE of the inlined function above is
0x00000087: DW_TAG_inlined_subroutine
DW_AT_abstract_origin (0x0000002a "aFunction")
DW_AT_low_pc (0x00000000004004b2)
DW_AT_high_pc (0x00000000004004d2)
DW_AT_call_file ("/tmp/test.c")
DW_AT_call_line (11)
DW_AT_call_column (0x03)
0x0000009b: DW_TAG_variable
DW_AT_location (DW_OP_fbreg -4)
DW_AT_abstract_origin (0x00000032 "a")
0x000000a3: DW_TAG_lexical_block
DW_AT_low_pc (0x00000000004004c3)
DW_AT_high_pc (0x00000000004004d2)
0x000000b0: DW_TAG_variable
DW_AT_location (DW_OP_fbreg -8)
DW_AT_abstract_origin (0x0000003e "value")
This causes GDB to fail matching the concrete lexical scope with the
corresponding abstract entry. Hence, the local vars of the abstract
function that are contained in the lexical scope are read separately
(and thus, in addition to) the local vars of the concrete scope.
Because the abstract definitions of the vars do not contain location
information, we see the extra 'value = <optimized out>' above.
This bug is highly related to PR gdb/25695, but the root cause is not
exactly the same. In PR gdb/25695, GCC emits an extra
DW_TAG_lexical_block without an DW_AT_abstract_origin that wraps the
body of the inlined function. That is, the trees of the abstract DIE
for the function and its concrete instance are structurally not the
same. In the case of using Clang, the trees have the same structure.
To tackle the Clang case, when traversing the children of the concrete
instance root, keep a reference to the child of the abstract DIE that
corresponds to the concrete child, so that we can match the two DIEs
heuristically in case of missing DW_AT_abstract_origin attributes.
The updated gdb.opt/inline-locals.exp test has been checked with GCC
5-10 and Clang 5-11.
gdb/ChangeLog:
2021-04-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* dwarf2/read.c (inherit_abstract_dies): Keep a reference to the
corresponding child of the abstract DIE when iterating the
children of the concrete DIE.
gdb/testsuite/ChangeLog:
2021-04-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.opt/inline-locals.c (scoped): New function.
(main): Call 'scoped'.
* gdb.opt/inline-locals.exp: Update with "info locals" tests
for scoped variables.
* gdb.dwarf2/dw2-inline-with-lexical-scope.c: New file.
* gdb.dwarf2/dw2-inline-with-lexical-scope.exp: New file.
Andrew Burgess [Wed, 14 Apr 2021 12:14:27 +0000 (13:14 +0100)]
gdb/doc: add missing parentheses around prompt in some examples
While reading the manual for -info-os I noticed that the GDB prompt is
given as 'gdb' when it should really be '(gdb)'. This is because the
prompt is created with: '@value{GDBP}'.
The GDBP variable (the GDB program name) is intended for use as the
prompt string (though this is not used consistently throughout the
manual), however it is normally used like '(@value{GDBP})', but in a
couple of places the enclosing parentheses are missing.
In this commit I do the following:
- Change '@value{GDBP}' to '(@value{GDBP})' wherever the variable
represents a prompt string.
- Replaces '(gdb)' with '(@value{GDBP})' in one example where we are
already using '(@value{GDBP})', this makes that one example
consistent.
I have NOT:
- Changed all instances of '(gdb)' with '(@value{GDBP})', this would
be a huge change.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Miscellaneous Commands): Add missing
parentheses to GDB prompt in example, and replace '(gdb)' with
'(@value{GDBP})' in one example where the latter was already in
use.
Tom Tromey [Wed, 14 Apr 2021 12:45:44 +0000 (06:45 -0600)]
Remove use of _WIN32_WCE
This removes the one last use of _WIN32_WCE from gdbserver.
gdbserver/ChangeLog
2021-04-14 Tom Tromey <tromey@adacore.com>
* win32-low.cc (windows_nat::handle_load_dll): Don't check
_WIN32_WCE.
H.J. Lu [Wed, 14 Apr 2021 12:30:59 +0000 (05:30 -0700)]
elf: Set p_memsz to p_filesz for loadable PT_NOTE segment
Since p_memsz of the loadable PT_NOTE segment should be the same as
p_filesz, set p_memsz on the loadable PT_NOTE segment when updating
p_filesz.
bfd/
PR binutils/27708
* elf.c (assign_file_positions_for_non_load_sections): Set
p_memsz to p_filesz for the loadable PT_NOTE segment.
binutils/
PR binutils/27708
* testsuite/binutils-all/x86-64/pr27708.dump: New file.
* testsuite/binutils-all/x86-64/pr27708.exe.bz2: Likewise.
* testsuite/binutils-all/x86-64/x86-64.exp: Run binutils/27708
test.
Mark Harmstone [Wed, 14 Apr 2021 10:53:30 +0000 (11:53 +0100)]
Ignore trailing bytes at the end of a Windows Resource Version structure.
PR 27686
* resbin.c (bin_to_res_version): Ignore any trailing bytes at the
end of the structure.
Tankut Baris Aktemur [Wed, 14 Apr 2021 08:02:34 +0000 (10:02 +0200)]
testsuite, gdb: recognize DW_OP_fbreg in lib/dwarf.exp
gdb/testsuite/ChangeLog:
2021-04-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* lib/dwarf.exp (_location): Recognize DW_OP_fbreg as an op.
Frederic Cambus [Wed, 14 Apr 2021 10:15:01 +0000 (11:15 +0100)]
Remove unneeded tests for definitions of NT_BSDNETCORE values.
binutils* readelf.c (get_netbsd_elfcore_note_type): Remove unneeded #ifdef
checks for NT_NETBSDCORE_AUXV and NT_NETBSDCORE_LWPSTATUS.
bfd * elf.c (elfcore_grok_netbsd_note): Remove unneeded #ifdef
checks for NT_NETBSDCORE_AUXV and NT_NETBSDCORE_LWPSTATUS.
Alan Modra [Wed, 14 Apr 2021 07:56:45 +0000 (17:26 +0930)]
PR27631, ubsan: elf32-metag.c:1550:10
PR 27631
* elf32-metag.c (elf_metag_relocate_section): Don't use &hh->elf
when hh might be NULL, test for NULL first.
Alan Modra [Wed, 14 Apr 2021 07:52:33 +0000 (17:22 +0930)]
PR27630, ubsan: elf32-arm.c:6587:20
PR 27630
* elf32-arm.c (elf32_arm_size_stubs): Don't use &hash->root when
hash might be NULL, cast instead.
Alan Modra [Wed, 14 Apr 2021 03:12:27 +0000 (12:42 +0930)]
PR27716, build failure for msdosdjgpp: PATH_MAX undeclared
We shouldn't be using arbitrary limits like PATH_MAX in GNU programs.
This patch also fixes some memory leaks in readelf when processing
separate debug info.
PR 27716
binutils/
* objdump.c (show_line): Don't limit paths to PATH_MAX.
* readelf.c (struct filedata): Change program_interpreter from
a char array to a char pointer.
(process_program_headers): Sanity check PT_INTERP p_filesz.
Malloc program_interpreter using p_filesz and read directly from
file.
(process_dynamic_section): Check program_interpreter is non-NULL.
(free_filedata): New function, split out from..
(process_object): ..here.
(close_debug_file): Call free_filedata.
* sysdep.h: Don't include sys/param.h.
(PATH_MAX): Don't define.
* configure.ac: Don't check for sys/param.h.
* configure: Regenerate.
gprof/
* gprof.h (PATH_MAX): Don't define.
* corefile.c (core_create_line_syms): Don't use PATH_MAX for initial
file name size.
* source.c (annotate_source): Malloc file name buffer. Always
trim off "-ann" when dos 8.3 annotate file matches original.
* utils.c (print_name_only): Malloc file name buffer.
Alan Modra [Tue, 13 Apr 2021 23:53:12 +0000 (09:23 +0930)]
Re: PR27723, Internal error in select_cie_for_fde
Let's make sure what we allow in the CIE initial instructions and what
select_cie_for_fde compares for a match is always in sync. Also
correct the previous patch that allowed DW_CFA_GNU_window_save to be
part of the CIE initial instructions, which was likely a mistake.
PR 27723
* dw2gencfi.c (initial_cie_insn): New function, extracted from..
(select_cie_for_fde): ..here. Simplify.
GDB Administrator [Wed, 14 Apr 2021 00:00:16 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Tue, 13 Apr 2021 13:51:04 +0000 (23:21 +0930)]
PR27723, Internal error in select_cie_for_fde
PR 27723
* dw2gencfi.c (select_cie_for_fde): Handle DW_CFA_val_offset,
DW_CFA_GNU_window_save and DW_CFA_restore_state.
Pedro Alves [Mon, 12 Apr 2021 19:23:54 +0000 (20:23 +0100)]
Remove WinCE code from gdbreplay
gdbserver/ChangeLog:
* gdbreplay.c [__MINGW32CE__] (COUNTOF, errno, strerror): Remove.
Tom Tromey [Tue, 13 Apr 2021 16:32:29 +0000 (10:32 -0600)]
Remove some unused typedefs from gdbserver
I noticed that gdbserver/win32-low.cc has a few typedefs that are not
used. This patch removes them.
gdbserver/ChangeLog
2021-04-13 Tom Tromey <tromey@adacore.com>
* win32-low.cc (winapi_CreateToolhelp32Snapshot)
(winapi_Module32First, winapi_Module32Next): Remove typedefs.
Tom de Vries [Tue, 13 Apr 2021 15:38:53 +0000 (17:38 +0200)]
[gdb] Fix regoff_t incompatibility
I did an experiment with importing the regex module in gnulib, and trying to
build gdb.
The first problem I ran into was that:
- regoff_t was defined as long int, and
- the address of a regoff_t variable i in ui_file_style::parse was passed
as int * to function extended_color.
Fix this by changing the types of some function parameters of functions
read_semi_number and extended_color from int * to regoff_t *.
Tested on x86_64-linux.
gdb/ChangeLog:
2021-04-13 Tom de Vries <tdevries@suse.de>
* ui-style.c (read_semi_number, extended_color): Change idx parameter
type to regoff_t *.
Luis Machado [Tue, 13 Apr 2021 12:19:52 +0000 (09:19 -0300)]
Fix build failure for 32-bit targets with --enable-targets=all
Replace use of %lx with %s.
gdb/ChangeLog:
2021-04-13 Luis Machado <luis.machado@linaro.org>
* rs6000-tdep.c (ppc_displaced_step_fixup): Use %s to print
hex values.
Nick Clifton [Tue, 13 Apr 2021 13:37:06 +0000 (14:37 +0100)]
Document the effect of --as-needed on --rpath on Linux based systems.
* ld.texi (Options): Add note about the effect of --as-needed on
the --rpath and --rpath-link options on Linux based systems.
Pedro Alves [Mon, 12 Apr 2021 19:23:54 +0000 (20:23 +0100)]
Remove process_stratum_target::hostio_last_error abstraction
Now that the WinCE port is gone, all ports map host I/O errors from
errno, so this abstraction is no longer necessary.
Basically undoes:
https://sourceware.org/pipermail/gdb-patches/2008-January/055511.html
https://sourceware.org/pipermail/gdb-patches/attachments/
20080131/
f44e7012/attachment.bin
gdbserver/ChangeLog:
* Makefile.in (SFILES): Remove hostio-errno.cc.
* configure: Regenerate.
* configure.ac (GDBSERVER_DEPFILES): No longer add
$srv_hostio_err_objs.
* configure.srv (srv_hostio_err_objs): Delete.
* hostio-errno.cc: Delete.
* hostio.cc (hostio_error): Inline hostio_last_error_from_errno
here.
* hostio.h (hostio_last_error_from_errno): Delete.
* target.cc (process_stratum_target::hostio_last_error): Delete.
* target.h (class process_stratum_target) <hostio_last_error>:
Delete.
Clément Chigot [Tue, 13 Apr 2021 06:32:55 +0000 (08:32 +0200)]
bfd: avoid infinite loop when static linking XCOFF
git commit
b95a0a3177bc changed a "return FALSE" to "continue", and
missed updating the while loop iterator.
* xcofflink.c (xcoff_link_check_ar_symbols): Update esym earlier.
Alan Modra [Tue, 13 Apr 2021 06:30:10 +0000 (16:00 +0930)]
PR27722, error: array subscript has type char
PR 27722
* libdep_plugin.c (str2vec): Don't pass a potentially signed char
to isspace.
Frederic Cambus [Mon, 12 Apr 2021 13:07:17 +0000 (15:07 +0200)]
Remove now unneeded #ifdef check for NT_NETBSD_PAX.
NT_NETBSD_PAX was defined in commit
be3b926d8d2dde16a55e9e303fadf95164e13ebf.
binutils/ChangeLog:
* readelf.c (process_netbsd_elf_note): Remove now unneeded #ifdef
check for NT_NETBSD_PAX.
Nelson Chu [Tue, 13 Apr 2021 04:32:16 +0000 (12:32 +0800)]
RISC-V: Don't report the mismatched version warning for the implicit extensions.
bfd/
* elfnn-riscv.c (riscv_version_mismatch): Do not report the warning
when the version of input or output is RISCV_UNKNOWN_VERSION, since
the extension is added implicitly.
* elfxx-riscv.c: Updated the obsolete comments.
(RISCV_UNKNOWN_VERSION): Moved to elfxx-riscv.h.
* elfxx-riscv.h (RISCV_UNKNOWN_VERSION): Added.
GDB Administrator [Tue, 13 Apr 2021 00:00:18 +0000 (00:00 +0000)]
Automatic date update in version.in
Will Schmidt [Mon, 12 Apr 2021 19:17:43 +0000 (14:17 -0500)]
[PATCH,rs6000] Fix vsx-regs.exp testcase failure
Hi,
This test exercise updates to the F* and VS* registers
and verifies updates to the same. Note that the registers
overlap; the doubleword[1] portion of any VS0-VS31
register contains the F0-F31 register contents, so any updates
to one can be measured in the other.
Per a brief investigation, we see that dl_main() currently
uses some VSX instructions, so the VS* values are not
going to be zero when this testcase reaches main, where these
tests begin. The test harness does not explicitly
initialize the full VS* values, so the first test loop
that updates the F* values means our VS* values are
uninitalized and will fail the first set of checks.
This update explicitly initializes the doubleword[0] portion
of the VS* registers, to allow this test to succeed.
2021-04-12 Will Schmidt <will_schmidt@vnet.ibm.com>
gdb/testsuite/ChangeLog:
* gdb.arch/vsx-regs.exp: Initialize vs* doublewords.
Will Schmidt [Mon, 12 Apr 2021 19:11:02 +0000 (14:11 -0500)]
[PATCH] gdb-power10-single-step
Hi,
This is based on a patch originally written by Alan Modra.
Powerpc / Power10 ISA 3.1 adds prefixed instructions, which
are 8 bytes in length. This is in contrast to powerpc previously
always having 4 byte instruction length. This patch implements
changes to allow GDB to better detect prefixed instructions, and
handle single stepping across the 8 byte instructions.
Added #defines to help test for PNOP and prefix instructions.
Update ppc_displaced_step_copy_insn() to handle pnop and prefixed
instructions whem R=0 (non-pc-relative).
Updated ppc_displaced_step_fixup() to properly handle the offset
value matching the current instruction size
Updated the for-loop within ppc_deal_with_atomic_sequence() to
count instructions properly in case we have a mix of 4-byte and
8-byte instructions within the atomic_sequence_length.
Added testcase and harness to exercise pc-relative load/store
instructions with R=0.
2021-04-12 Will Schmidt <will_schmidt@vnet.ibm.com>
gdb/ChangeLog:
* rs6000-tdep.c: Add support for single-stepping of
prefixed instructions.
gdb/testsuite/ChangeLog:
* gdb.arch/powerpc-plxv-nonrel.s: Testcase using
non-relative plxv instructions.
* gdb.arch/powerpc-plxv-nonrel.exp: Testcase harness.
Will Schmidt [Mon, 12 Apr 2021 18:35:54 +0000 (13:35 -0500)]
[PATCH, rs6000, v3][PR gdb/27525] displaced stepping across addpcis/lnia.
This addresses PR gdb/27525. The lnia and other variations
of the addpcis instruction write the value of the NIA into a target register.
If we are single-stepping across a breakpoint, the instruction is executed
from a displaced location, and thusly the written value of the PC/NIA
will be incorrect. The changes here will measure the displacement
offset, and adjust the target register value to compensate.
YYYY-MM-DD Will Schmidt <will_schmidt@vnet.ibm.com>
gdb/ChangeLog:
* rs6000-tdep.c (ppc_displaced_step_fixup): Update to handle
the addpcis/lnia instruction.
gdb/testsuite/ChangeLog:
* gdb.arch/powerpc-addpcis.exp: Testcase harness to
exercise single-stepping over subpcis,lnia,addpcis instructions
with displacement.
* gdb.arch/powerpc-addpcis.s: Testcase with stream
of addpcis/lnia/subpcis instructions.
* gdb.arch/powerpc-lnia.exp: Testcase harness to exercise
single-stepping over lnia instructions with displacement.
* gdb.arch/powerpc-lnia.s: Testcase with stream of
lnia instructions.
Will Schmidt [Mon, 12 Apr 2021 18:17:56 +0000 (13:17 -0500)]
[rs6000] Create a powerpc-power10.exp test
Inspired by the existing powerpc-power9.exp test, this is a
new test to cover the power10 instruction disassembly.
gdb/testsuite/ChangeLog:
2021-04-12 Will Schmidt <will_schmidt@vnet.ibm.com>
* gdb.arch/powerpc-power10.s: New test for instructions.
* gdb.arch/powerpc-power10.exp: Harness to run the test.
Will Schmidt [Mon, 12 Apr 2021 17:17:52 +0000 (12:17 -0500)]
Add myself to gdb/MAINTAINERS
gdb/ChangeLog:
* MAINTAINERS (Write After Approval): Add myself.
Alan Modra [Mon, 12 Apr 2021 15:02:11 +0000 (00:32 +0930)]
m68hc11 gas testsuite wart
Writing to a potentially read-only source directory is not good.
* testsuite/gas/m68hc11/m68hc11.exp (gas_m68hc11_message): Don't
write to $srcdir. Use gas_host_run and read output file rather
than gas_start/gas_finish.
Carl Love [Fri, 26 Mar 2021 21:54:47 +0000 (16:54 -0500)]
RS6000 Add support to print vector register contents as float128
This patch adds a floating point 128-bit composite field to the vsx
register type. When printing the register with p/f the float128 field will
be printed as a 128-bit floating point value. A test case to verify the new
vsx register field is visible and correctly prints out the value of a 128-bit
floating point value is also added.
gdb/ChangeLog:
* rs6000-tdep.c (rs6000_builtin_type_vec128): Add t_float128 variable.
(rs6000_builtin_type_vec128): Add append_composite_type_field for
float128.
gdb/testsuite/ChangeLog:
* gdb.arch/vsx-vsr-float128.c: New test file.
* gdb.arch/vsx-vsr-float128.exp: New expect file.
Simon Marchi [Mon, 12 Apr 2021 15:10:57 +0000 (11:10 -0400)]
gdb, gdbserver: remove WinCE support code
The support for WinCE was removed with commit
84b300de3666 ("gdbserver:
remove support for ARM/WinCE"). There is some leftover code for WinCE
support, guarded by the _WIN32_WCE macro, which I didn't know of at the
time.
I didn't remove the _WIN32_WCE references in the tests, because in
theory we still support the WinCE architecture in GDB (when debugging
remotely). So someone could run a test with that (although I'd be
really surprised).
gdb/ChangeLog:
* nat/windows-nat.c: Remove all code guarded by _WIN32_WCE.
* nat/windows-nat.h: Likewise.
gdbserver/ChangeLog:
* win32-low.cc: Remove all code guarded by _WIN32_WCE.
* win32-low.h: Likewise.
Change-Id: I7a871b897e2135dc195b10690bff2a01d9fac05a
Alan Modra [Mon, 12 Apr 2021 09:03:45 +0000 (18:33 +0930)]
ENABLE_CHECKING in bfd, opcodes, binutils, ld
gas already has this. Here it enables checking hash table type passed
to elf_link_hash_lookup and elf_link_hash_traverse.
bfd/
* elf-bfd.h (ENABLE_CHECKING): Define.
(elf_link_hash_lookup): Abort if wrong type of hash table.
(elf_link_hash_traverse): Likewise.
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
binutils/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
opcodes/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
Tankut Baris Aktemur [Mon, 12 Apr 2021 12:14:06 +0000 (14:14 +0200)]
gdbserver: constify the 'pid_to_exec_file' target op
gdbserver/ChangeLog:
2021-04-12 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* target.h (class process_stratum_target) <pid_to_exec_file>:
Constify the return type. Update the definition/references below.
* target.cc (process_stratum_target::pid_to_exec_file)
* linux-low.h (class linux_process_target) <pid_to_exec_file>
* linux-low.cc (linux_process_target::pid_to_exec_file)
* netbsd-low.h (class netbsd_process_target) <pid_to_exec_file>
* netbsd-low.cc (netbsd_process_target::pid_to_exec_file)
* server.cc (handle_qxfer_exec_file)
This page took 0.048673 seconds and 4 git commands to generate.