Maninder Singh [Thu, 25 Jun 2015 04:49:50 +0000 (10:19 +0530)]
arm64/hw_breakpoint.c: remove unnecessary header
Header <asm/kdebug.h> is not needed for arm64/hw_breakpoint.c,
Removing the same.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Xi Wang [Fri, 26 Jun 2015 01:39:15 +0000 (18:39 -0700)]
arm64: bpf: fix endianness conversion bugs
Upper bits should be zeroed in endianness conversion:
- even when there's no need to change endianness (i.e., BPF_FROM_BE
on big endian or BPF_FROM_LE on little endian);
- after rev16.
This patch fixes such bugs by emitting extra instructions to clear
upper bits.
Cc: Zi Shen Lim <zlim.lnx@gmail.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Fixes: e54bcde3d69d ("arm64: eBPF JIT compiler")
Cc: <stable@vger.kernel.org> # 3.18+
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Xi Wang [Thu, 25 Jun 2015 12:47:39 +0000 (05:47 -0700)]
arm64: bpf: fix out-of-bounds read in bpf2a64_offset()
Problems occur when bpf_to or bpf_from has value prog->len - 1 (e.g.,
"Very long jump backwards" in test_bpf where the last instruction is a
jump): since ctx->offset has length prog->len, ctx->offset[bpf_to + 1]
or ctx->offset[bpf_from + 1] will cause an out-of-bounds read, leading
to a bogus jump offset and kernel panic.
This patch moves updating ctx->offset to after calling build_insn(),
and changes indexing to use bpf_to and bpf_from without + 1.
Fixes: e54bcde3d69d ("arm64: eBPF JIT compiler")
Cc: <stable@vger.kernel.org> # 3.18+
Cc: Zi Shen Lim <zlim.lnx@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stephen Boyd [Wed, 24 Jun 2015 20:14:18 +0000 (13:14 -0700)]
ARM64: smp: Fix suspicious RCU usage with ipi tracepoints
John Stultz reported an RCU splat on ARM with ipi trace events
enabled. It looks like the same problem exists on ARM64.
At this point in the IPI handling path we haven't called
irq_enter() yet, so RCU doesn't know that we're about to exit
idle and properly warns that we're using RCU from an idle CPU.
Use trace_ipi_entry_rcuidle() instead of trace_ipi_entry() so
that RCU is informed about our exit from idle.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # 3.17+
Fixes: 45ed695ac10a ("ARM64: add IPI tracepoints")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Vladimir Murzin [Fri, 19 Jun 2015 14:28:03 +0000 (15:28 +0100)]
arm64: use private ratelimit state along with show_unhandled_signals
printk_ratelimit() shares the ratelimiting state with other callers what
may lead to scenarios where at the time we want to print out debug
information we already limited, so nothing appears in the dmesg - this
makes exception-trace quite poor helper in debugging.
Additionally, we have imbalance with some messages limited with global
ratelimit state and other messages limited with their private state
defined via pr_*_ratelimited().
To address this inconsistency show_unhandled_signals_ratelimited()
macro is introduced and caller sites are converted to use it.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Vladimir Murzin [Fri, 19 Jun 2015 14:28:16 +0000 (15:28 +0100)]
arm64: show unhandled SP/PC alignment faults
Report unhandled SP/PC alignment faults if the show_unhandled_signals
variable is set (via /proc/sys/debug/exception-trace).
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Will Deacon [Fri, 19 Jun 2015 12:56:33 +0000 (13:56 +0100)]
arm64: vdso: work-around broken ELF toolchains in Makefile
When building the kernel with a bare-metal (ELF) toolchain, the -shared
option may not be passed down to collect2, resulting in silent corruption
of the vDSO image (in particular, the DYNAMIC section is omitted).
The effect of this corruption is that the dynamic linker fails to find
the vDSO symbols and libc is instead used for the syscalls that we
intended to optimise (e.g. gettimeofday). Functionally, there is no
issue as the sigreturn trampoline is still intact and located by the
kernel.
This patch fixes the problem by explicitly passing -shared to the linker
when building the vDSO.
Cc: <stable@vger.kernel.org>
Reported-by: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Reported-by: James Greenlaigh <james.greenhalgh@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Sudeep Holla [Thu, 18 Jun 2015 14:41:32 +0000 (15:41 +0100)]
arm64: kernel: rename __cpu_suspend to keep it aligned with arm
This patch renames __cpu_suspend to cpu_suspend so that it's aligned
with ARM32. It also removes the redundant wrapper created.
This is in preparation to implement generic PSCI system suspend using
the cpu_{suspend,resume} which now has the same interface on both ARM
and ARM64.
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Vladimir Murzin [Mon, 15 Jun 2015 16:30:17 +0000 (17:30 +0100)]
arm64: compat: print compat_sp instead of sp
We check against compat_sp, but print out arm64's sp - fix it.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Dave P Martin [Tue, 16 Jun 2015 16:38:47 +0000 (17:38 +0100)]
arm64: mm: Fix freeing of the wrong memmap entries with !SPARSEMEM_VMEMMAP
The memmap freeing code in free_unused_memmap() computes the end of
each memblock by adding the memblock size onto the base. However,
if SPARSEMEM is enabled then the value (start) used for the base
may already have been rounded downwards to work out which memmap
entries to free after the previous memblock.
This may cause memmap entries that are in use to get freed.
In general, you're not likely to hit this problem unless there
are at least 2 memblocks and one of them is not aligned to a
sparsemem section boundary. Note that carve-outs can increase
the number of memblocks by splitting the regions listed in the
device tree.
This problem doesn't occur with SPARSEMEM_VMEMMAP, because the
vmemmap code deals with freeing the unused regions of the memmap
instead of requiring the arch code to do it.
This patch gets the memblock base out of the memblock directly when
computing the block end address to ensure the correct value is used.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Mon, 15 Jun 2015 15:40:27 +0000 (16:40 +0100)]
arm64: entry: fix context tracking for el0_sp_pc
Commit
6c81fe7925cc4c42 ("arm64: enable context tracking") did not
update el0_sp_pc to use ct_user_exit, but this appears to have been
unintentional. In commit
6ab6463aeb5fbc75 ("arm64: adjust el0_sync so
that a function can be called") we made x0 available, and in the return
to userspace we call ct_user_enter in the kernel_exit macro.
Due to this, we currently don't correctly inform RCU of the user->kernel
transition, and may erroneously account for time spent in the kernel as
if we were in an extended quiescent state when CONFIG_CONTEXT_TRACKING
is enabled.
As we do record the kernel->user transition, a userspace application
making accesses from an unaligned stack pointer can demonstrate the
imbalance, provoking the following warning:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3660 at kernel/context_tracking.c:75 context_tracking_enter+0xd8/0xe4()
Modules linked in:
CPU: 2 PID: 3660 Comm: a.out Not tainted 4.1.0-rc7+ #8
Hardware name: ARM Juno development board (r0) (DT)
Call trace:
[<
ffffffc000089914>] dump_backtrace+0x0/0x124
[<
ffffffc000089a48>] show_stack+0x10/0x1c
[<
ffffffc0005b3cbc>] dump_stack+0x84/0xc8
[<
ffffffc0000b3214>] warn_slowpath_common+0x98/0xd0
[<
ffffffc0000b330c>] warn_slowpath_null+0x14/0x20
[<
ffffffc00013ada4>] context_tracking_enter+0xd4/0xe4
[<
ffffffc0005b534c>] preempt_schedule_irq+0xd4/0x114
[<
ffffffc00008561c>] el1_preempt+0x4/0x28
[<
ffffffc0001b8040>] exit_files+0x38/0x4c
[<
ffffffc0000b5b94>] do_exit+0x430/0x978
[<
ffffffc0000b614c>] do_group_exit+0x40/0xd4
[<
ffffffc0000c0208>] get_signal+0x23c/0x4f4
[<
ffffffc0000890b4>] do_signal+0x1ac/0x518
[<
ffffffc000089650>] do_notify_resume+0x5c/0x68
---[ end trace
963c192600337066 ]---
This patch adds the missing ct_user_exit to the el0_sp_pc entry path,
correcting the context tracking for this case.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Fixes: 6c81fe7925cc ("arm64: enable context tracking")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Mon, 15 Jun 2015 14:02:44 +0000 (15:02 +0100)]
arm64: defconfig: enable memtest
The kernel memtest utility is incredibly useful for detecting memory
problems, but sadly isn't in defconfig.
The memtest itself is only run when the user has explicitly passed a
memtest option on the kernel command line, so simply enabling the option
should not have a negative impact.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Vladimir Murzin [Fri, 12 Jun 2015 14:25:04 +0000 (15:25 +0100)]
arm64: mm: remove reference to tlb.S from comment block
tlb.S has been removed since
fa48e6f "arm64: mm: Optimise tlb flush logic
where we have >4K granule", so align comment with that.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Catalin Marinas [Fri, 12 Jun 2015 10:24:41 +0000 (11:24 +0100)]
arm64: Do not attempt to use init_mm in reset_context()
After secondary CPU boot or hotplug, the active_mm of the idle thread is
&init_mm. The init_mm.pgd (swapper_pg_dir) is only meant for TTBR1_EL1
and must not be set in TTBR0_EL1. Since when active_mm == &init_mm the
TTBR0_EL1 is already set to the reserved value, there is no need to
perform any context reset.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Marc Zyngier [Fri, 12 Jun 2015 11:06:37 +0000 (12:06 +0100)]
arm64: KVM: Switch vgic save/restore to alternative_insn
So far, we configured the world-switch by having a small array
of pointers to the save and restore functions, depending on the
GIC used on the platform.
Loading these values each time is a bit silly (they never change),
and it makes sense to rely on the instruction patching instead.
This leads to a nice cleanup of the code.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Fri, 12 Jun 2015 11:06:36 +0000 (12:06 +0100)]
arm64: alternative: Introduce feature for GICv3 CPU interface
Add a new item to the feature set (ARM64_HAS_SYSREG_GIC_CPUIF)
to indicate that we have a system register GIC CPU interface
This will help KVM switching to alternative instruction patching.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Will Deacon [Thu, 11 Jun 2015 17:16:47 +0000 (18:16 +0100)]
arm64: psci: fix !CONFIG_HOTPLUG_CPU build warning
When building without CONFIG_HOTPLUG_CPU, GCC complains (rightly) that
psci_tos_resident_on is unused:
arch/arm64/kernel/psci.c:61:13: warning: ‘psci_tos_resident_on’ defined but not used [-Wunused-function]
static bool psci_tos_resident_on(int cpu)
As it's only ever used when CONFIG_HOTPLUG_CPU is selected, let's move
it into the existing ifdef.
Signed-off-by: Will Deacon <will.deacon@arm.com>
[Mark: write commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Janet Liu [Thu, 11 Jun 2015 04:02:45 +0000 (12:02 +0800)]
arm64: fix bug for reloading FPSIMD state after CPU hotplug.
Now FPSIMD don't handle HOTPLUG_CPU. This introduces bug after cpu down/up process.
After cpu down/up process, the FPSMID hardware register is default value, not any
process's fpsimd context. when CPU_DEAD set cpu's fpsimd_state to NULL, it will force
to load the fpsimd context for the thread, to avoid the chance to skip to load the context.
If process A is the last user process on CPU N before cpu down, and the first user process
on the same CPU N after cpu up, A's fpsimd_state.cpu is the current cpu id,
and per_cpu(fpsimd_last_state) points A's fpsimd_state, so kernel will not reload the
context during it return to user space.
Signed-off-by: Janet Liu <janet.liu@spreadtrum.com>
Signed-off-by: Xiongshan An <xiongshan.an@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
[catalin.marinas@arm.com: some mostly cosmetic clean-ups]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Janet Liu [Thu, 11 Jun 2015 04:04:32 +0000 (12:04 +0800)]
arm64: kernel thread don't need to save fpsimd context.
kernel thread's default fpsimd state is zero. When fork a thread, if parent is kernel thread,
and save hardware context to parent's fpsimd state, but this hardware context is user
process's context, because kernel thread don't use fpsimd, it will not introduce issue,
it add a little cost.
Signed-off-by: Janet Liu <janet.liu@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Josh Stone [Fri, 5 Jun 2015 21:28:03 +0000 (14:28 -0700)]
arm64: fix missing syscall trace exit
If a syscall is entered without TIF_SYSCALL_TRACE set, then it goes on
the fast path. It's then possible to have TIF_SYSCALL_TRACE added in
the middle of the syscall, but ret_fast_syscall doesn't check this flag
again. This causes a ptrace syscall-exit-stop to be missed.
For instance, from a PTRACE_EVENT_FORK reported during do_fork, the
tracer might resume with PTRACE_SYSCALL, setting TIF_SYSCALL_TRACE.
Now the completion of the fork should have a syscall-exit-stop.
Russell King fixed this on arm by re-checking _TIF_SYSCALL_WORK in the
fast exit path. Do the same on arm64.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Josh Stone <jistone@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Catalin Marinas [Fri, 5 Jun 2015 10:21:23 +0000 (11:21 +0100)]
Merge branch 'arm64/psci-rework' of git://git./linux/kernel/git/mark/linux
* 'arm64/psci-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux:
arm64: psci: remove ACPI coupling
arm64: psci: kill psci_power_state
arm64: psci: account for Trusted OS instances
arm64: psci: support unsigned return values
arm64: psci: remove unnecessary id indirection
arm64: smp: consistently use error codes
arm64: smp_plat: add get_logical_index
arm/arm64: kvm: add missing PSCI include
Conflicts:
arch/arm64/kernel/smp.c
Marc Zyngier [Mon, 1 Jun 2015 09:47:42 +0000 (10:47 +0100)]
arm64: alternative: Work around .inst assembler bugs
AArch64 toolchains suffer from the following bug:
$ cat blah.S
1:
.inst 0x01020304
.if ((. - 1b) != 4)
.error "blah"
.endif
$ aarch64-linux-gnu-gcc -c blah.S
blah.S: Assembler messages:
blah.S:3: Error: non-constant expression in ".if" statement
which precludes the use of msr_s and co as part of alternatives.
We workaround this issue by not directly testing the labels
themselves, but by moving the current output pointer by a value
that should always be zero. If this value is not null, then
we will trigger a backward move, which is expclicitely forbidden.
This triggers the error we're after:
AS arch/arm64/kvm/hyp.o
arch/arm64/kvm/hyp.S: Assembler messages:
arch/arm64/kvm/hyp.S:1377: Error: attempt to move .org backwards
scripts/Makefile.build:294: recipe for target 'arch/arm64/kvm/hyp.o' failed
make[1]: *** [arch/arm64/kvm/hyp.o] Error 1
Makefile:946: recipe for target 'arch/arm64/kvm' failed
Not pretty, but at least works on the current toolchains.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Mon, 1 Jun 2015 09:47:41 +0000 (10:47 +0100)]
arm64: alternative: Merge alternative-asm.h into alternative.h
asm/alternative-asm.h and asm/alternative.h are extremely similar,
and really deserve to live in the same file (as this makes further
modufications a bit easier).
Fold the content of alternative-asm.h into alternative.h, and
update the few users.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Mon, 1 Jun 2015 09:47:40 +0000 (10:47 +0100)]
arm64: alternative: Allow immediate branch as alternative instruction
Since all branches are PC-relative on AArch64, these instructions
cannot be used as an alternative with the simplistic approach
we currently have (the immediate has been computed from
the .altinstr_replacement section, and end-up being completely off
if the target is outside of the replacement sequence).
This patch handles the branch instructions in a different way,
using the insn framework to recompute the immediate, and generate
the right displacement in the above case.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Wed, 3 Jun 2015 13:36:23 +0000 (14:36 +0100)]
arm64: Rework alternate sequence for ARM erratum 845719
The workaround for erratum 845719 is currently using
a branch between two alternate sequences, which is
quite fragile, and that we are going to break as we
rework the alternative code.
This patch reworks the workaround to fit in a single
alternative sequence. The generated code itself is
unchanged.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Mon, 1 Jun 2015 09:47:39 +0000 (10:47 +0100)]
arm64: insn: Add aarch64_{get,set}_branch_offset
In order to deal with branches located in alternate sequences,
but pointing to the main kernel text, it is required to extract
the relative displacement encoded in the instruction, and to be
able to update said instruction with a new offset (once it is
known).
For this, we introduce three new helpers:
- aarch64_insn_is_branch_imm is a predicate indicating if the
instruction is an immediate branch
- aarch64_get_branch_offset returns a signed value representing
the byte offset encoded in a branch instruction
- aarch64_set_branch_offset takes an instruction and an offset,
and returns the corresponding updated instruction.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ard Biesheuvel [Mon, 1 Jun 2015 11:40:34 +0000 (13:40 +0200)]
arm64: drop sleep_idmap_phys and clean up cpu_resume()
Two cleanups of the asm function cpu_resume():
- The global variable sleep_idmap_phys always points to idmap_pg_dir,
so we can just use that value directly in the CPU resume path.
- Unclutter the load of sleep_save_sp::save_ptr_stash_phys.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ard Biesheuvel [Mon, 1 Jun 2015 11:40:33 +0000 (13:40 +0200)]
arm64: reduce ID map to a single page
Commit
ea8c2e112445 ("arm64: Extend the idmap to the whole kernel
image") changed the early page table code so that the entire kernel
Image is covered by the identity map. This allows functions that
need to enable or disable the MMU to reside anywhere in the kernel
Image.
However, this change has the unfortunate side effect that the Image
cannot cross a physical 512 MB alignment boundary anymore, since the
early page table code cannot deal with the Image crossing a /virtual/
512 MB alignment boundary.
So instead, reduce the ID map to a single page, that is populated by
the contents of the .idmap.text section. Only three functions reside
there at the moment: __enable_mmu(), cpu_resume_mmu() and cpu_reset().
If new code is introduced that needs to manipulate the MMU state, it
should be added to this section as well.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ard Biesheuvel [Mon, 1 Jun 2015 11:40:32 +0000 (13:40 +0200)]
arm64: use fixmap region for permanent FDT mapping
Currently, the FDT blob needs to be in the same 512 MB region as
the kernel, so that it can be mapped into the kernel virtual memory
space very early on using a minimal set of statically allocated
translation tables.
Now that we have early fixmap support, we can relax this restriction,
by moving the permanent FDT mapping to the fixmap region instead.
This way, the FDT blob may be anywhere in memory.
This also moves the vetting of the FDT to mmu.c, since the early
init code in head.S does not handle mapping of the FDT anymore.
At the same time, fix up some comments in head.S that have gone stale.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ard Biesheuvel [Mon, 1 Jun 2015 11:40:31 +0000 (13:40 +0200)]
of/fdt: split off FDT self reservation from memreserve processing
This splits off the reservation of the memory occupied by the FDT
binary itself from the processing of the memory reservations it
contains. This is necessary because the physical address of the FDT,
which is needed to perform the reservation, may not be known to the
FDT driver core, i.e., it may be mapped outside the linear direct
mapping, in which case __pa() returns a bogus value.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Will Deacon [Wed, 27 May 2015 14:39:40 +0000 (15:39 +0100)]
arm64: context-switch user tls register tpidr_el0 for compat tasks
Since commit
a4780adeefd0 ("ARM: 7735/2: Preserve the user r/w register
TPIDRURW on context switch and fork"), arch/arm/ has context switched
the user-writable TLS register, so do the same for compat tasks running
under the arm64 kernel.
Reported-by: André Hentschel <nerv@dawncrow.de>
Tested-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Thu, 30 Apr 2015 13:22:04 +0000 (14:22 +0100)]
arm64: psci: remove ACPI coupling
The 32-bit ARM port doesn't have ACPI headers, and conditionally
including them is going to look horrendous. In preparation for sharing
the PSCI invocation code with 32-bit, move the acpi_psci_* function
declarations and definitions such that the PSCI client code need not
include ACPI headers.
While it would seem like we could simply hide the ACPI includes in
psci.h, the ACPI headers have hilarious circular dependencies which make
this infeasible without reorganising most of ACPICA. So rather than
doing that, move the acpi_psci_* prototypes into psci.h.
The psci_acpi_init function is made dependent on CONFIG_ACPI (with a
stub implementation in asm/psci.h) such that it need not be built for
32-bit ARM or kernels without ACPI support. The currently missing __init
annotations are added to the prototypes in the header.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Al Stone <al.stone@linaro.org>
Reviewed-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Mark Rutland [Thu, 30 Apr 2015 16:59:03 +0000 (17:59 +0100)]
arm64: psci: kill psci_power_state
A PSCI 1.0 implementation may choose to use the new extended StateID
format, the presence of which may be queried via the PSCI_FEATURES call.
The layout of this new StateID format is incompatible with the existing
format, and so to handle both we must abstract attempts to parse the
fields.
In preparation for PSCI 1.0 support, this patch introduces
psci_power_state_loses_context and psci_power_state_is_valid functions
to query information from a PSCI power state, which is no longer
decomposed (and hence the pack/unpack functions are removed). As it is
no longer decomposed, it is now passed round as an opaque u32 token.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Mark Rutland [Wed, 22 Apr 2015 17:10:26 +0000 (18:10 +0100)]
arm64: psci: account for Trusted OS instances
Software resident in the secure world (a "Trusted OS") may cause CPU_OFF
calls for the CPU it is resident on to be denied. Such a denial would be
fatal for the kernel, and so we must detect when this can happen before
the point of no return.
This patch implements Trusted OS detection for PSCI 0.2+ systems, using
MIGRATE_INFO_TYPE and MIGRATE_INFO_UP_CPU. When a trusted OS is detected
as resident on a particular CPU, attempts to hot unplug that CPU will be
denied early, before they can prove fatal.
Trusted OS migration is not implemented by this patch. Implementation of
migratable UP trusted OSs seems unlikely, and the right policy for
migration is unclear (and will likely differ across implementations). As
such, it is likely that migration will require cooperation with Trusted
OS drivers.
PSCI implementations prior to 0.1 do not provide the facility to detect
the presence of a Trusted OS, nor the CPU any such OS is resident on, so
without additional information it is not possible to handle Trusted OSs
with PSCI 0.1.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Mark Rutland [Mon, 20 Apr 2015 13:51:00 +0000 (14:51 +0100)]
arm64: psci: support unsigned return values
PSCI_VERSION and MIGRATE_INFO_TYPE_UP_CPU return unsigned values, with
the latter returning a 64-bit value. However, the PSCI invocation
functions have prototypes returning int.
This patch upgrades the invocation functions to return unsigned long,
with a new typedef to keep things legible. As PSCI_VERSION cannot return
a negative value, the erroneous check against PSCI_RET_NOT_SUPPORTED is
also removed. The unrelated psci_initcall_t typedef is moved closer to
its first user, to avoid confusion with the invocation functions.
In preparation for sharing the code with ARM, unsigned long is used in
preference of u64. In the SMC32 calling convention, the relevant fields
will be 32 bits wide.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Mark Rutland [Wed, 22 Apr 2015 15:22:55 +0000 (16:22 +0100)]
arm64: psci: remove unnecessary id indirection
PSCI 0.1 did not define canonical IDs for CPU_ON, CPU_OFF, CPU_SUSPEND,
or MIGRATE, and so these need to be provided when using firmware
compliant to PSCI 0.1.
However, functions introduced in 0.2 or later have canonical IDs, and
these cannot be provided via DT. There's no need to indirect the IDs via
a table; they can be used directly at callsites (and already are for
SYSTEM_OFF and SYSTEM_RESET).
This patch removes the unnecessary function ID indirection for
AFFINITY_INFO and MIGRATE_INFO_TYPE.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Mark Rutland [Mon, 20 Apr 2015 16:55:30 +0000 (17:55 +0100)]
arm64: smp: consistently use error codes
cpu_kill currently returns one for success and zero for failure, which
is unlike all the other cpu_operations, which return zero for success
and an error code upon failure. This difference is unnecessarily
confusing.
Make cpu_kill consistent with the other cpu_operations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Mark Rutland [Wed, 22 Apr 2015 16:26:18 +0000 (17:26 +0100)]
arm64: smp_plat: add get_logical_index
The PSCI MIGRATE_INFO_UP_CPU call returns a physical ID, which we will
need to map back to a Linux logical ID.
Implement a reusable get_logical_index to map from a physical ID to a
logical ID.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Mark Rutland [Fri, 1 May 2015 09:53:39 +0000 (10:53 +0100)]
arm/arm64: kvm: add missing PSCI include
We make use of the PSCI function IDs, but don't explicitly include the
header which defines them. Relying on transitive header includes is
fragile and will be broken as headers are refactored.
This patch includes the relevant header file directly so as to avoid
future breakage.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Paul E. McKenney [Tue, 12 May 2015 21:50:05 +0000 (14:50 -0700)]
arm64: Use common outgoing-CPU-notification code
This commit removes the open-coded CPU-offline notification with new
common code. In particular, this change avoids calling scheduler code
using RCU from an offline CPU that RCU is ignoring. This is a minimal
change. A more intrusive change might invoke the cpu_check_up_prepare()
and cpu_set_state_online() functions at CPU-online time, which would
allow onlining throw an error if the CPU did not go offline properly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Hou Pengyang [Sun, 10 May 2015 11:07:40 +0000 (11:07 +0000)]
arm64: perf: Fix callchain parse error with kernel tracepoint events
For ARM64, when tracing with tracepoint events, the IP and pstate are set
to 0, preventing the perf code parsing the callchain and resolving the
symbols correctly.
./perf record -e sched:sched_switch -g --call-graph dwarf ls
[ perf record: Captured and wrote 0.146 MB perf.data ]
./perf report -f
Samples: 194 of event 'sched:sched_switch', Event count (approx.): 194
Children Self Command Shared Object Symbol
100.00% 100.00% ls [unknown] [.]
0000000000000000
The fix is to implement perf_arch_fetch_caller_regs for ARM64, which fills
several necessary registers used for callchain unwinding, including pc,sp,
fp and spsr .
With this patch, callchain can be parsed correctly as follows:
......
+ 2.63% 0.00% ls [kernel.kallsyms] [k] vfs_symlink
+ 2.63% 0.00% ls [kernel.kallsyms] [k] follow_down
+ 2.63% 0.00% ls [kernel.kallsyms] [k] pfkey_get
+ 2.63% 0.00% ls [kernel.kallsyms] [k] do_execveat_common.isra.33
- 2.63% 0.00% ls [kernel.kallsyms] [k] pfkey_send_policy_notify
pfkey_send_policy_notify
pfkey_get
v9fs_vfs_rename
page_follow_link_light
link_path_walk
el0_svc_naked
.......
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Catalin Marinas [Tue, 19 May 2015 15:15:22 +0000 (16:15 +0100)]
Merge branch 'for-next/cpu-init' of git://git./linux/kernel/git/arm64/linux
* 'for-next/cpu-init' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ARM64: kernel: unify ACPI and DT cpus initialization
ARM64: kernel: make cpu_ops hooks DT agnostic
Lorenzo Pieralisi [Wed, 13 May 2015 13:12:47 +0000 (14:12 +0100)]
ARM64: kernel: unify ACPI and DT cpus initialization
The code that initializes cpus on arm64 is currently split in two
different code paths that carry out DT and ACPI cpus initialization.
Most of the code executing SMP initialization is common and should
be merged to reduce discrepancies between ACPI and DT initialization
and to have code initializing cpus in a single common place in the
kernel.
This patch refactors arm64 SMP cpus initialization code to merge
ACPI and DT boot paths in a common file and to create sanity
checks that can be reused by both boot methods.
Current code assumes PSCI is the only available boot method
when arm64 boots with ACPI; this can be easily extended if/when
the ACPI parking protocol is merged into the kernel.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com> [DT]
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Lorenzo Pieralisi [Wed, 13 May 2015 13:12:46 +0000 (14:12 +0100)]
ARM64: kernel: make cpu_ops hooks DT agnostic
ARM64 CPU operations such as cpu_init and cpu_init_idle take
a struct device_node pointer as a parameter, which corresponds to
the device tree node of the logical cpu on which the operation
has to be applied.
With the advent of ACPI on arm64, where MADT static table entries
are used to initialize cpus, the device tree node parameter
in cpu_ops hooks become useless when booting with ACPI, since
in that case cpu device tree nodes are not present and can not be
used for cpu initialization.
The current cpu_init hook requires a struct device_node pointer
parameter because it is called while parsing the device tree to
initialize CPUs, when the cpu_logical_map (that is used to match
a cpu node reg property to a device tree node) for a given logical
cpu id is not set up yet. This means that the cpu_init hook cannot
rely on the of_get_cpu_node function to retrieve the device tree
node corresponding to the logical cpu id passed in as parameter,
so the cpu device tree node must be passed in as a parameter to fix
this catch-22 dependency cycle.
This patch reshuffles the cpu_logical_map initialization code so
that the cpu_init cpu_ops hook can safely use the of_get_cpu_node
function to retrieve the cpu device tree node, removing the need for
the device tree node pointer parameter.
In the process, the patch removes device tree node parameters
from all cpu_ops hooks, in preparation for SMP DT/ACPI cpus
initialization consolidation.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com> [DT]
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Michal Simek [Mon, 18 May 2015 11:10:48 +0000 (13:10 +0200)]
arm64: Rename temp variable in read*_relaxed()
This resolves the following sparse warning from readl() and other
macros, which ends up embedding readl_relaxed() using the same
variable.
Warning log:
include/asm-generic/io.h:364:16: warning: symbol '__v' shadows an
earlier one
include/asm-generic/io.h:364:16: originally declared here
include/asm-generic/io.h:372:16: warning: symbol '__v' shadows an
earlier one
include/asm-generic/io.h:372:16: originally declared here
include/asm-generic/io.h:380:16: warning: symbol '__v' shadows an
earlier one
include/asm-generic/io.h:380:16: originally declared here
include/asm-generic/io.h:568:16: warning: symbol '__v' shadows an
earlier one
include/asm-generic/io.h:568:16: originally declared here
include/asm-generic/io.h:576:16: warning: symbol '__v' shadows an
earlier one
include/asm-generic/io.h:576:16: originally declared here
include/asm-generic/io.h:584:16: warning: symbol '__v' shadows an
earlier one
include/asm-generic/io.h:584:16: originally declared here
The same patch was already applied to arm32 as
"ARM: 7118/1: rename temp variable in read*_relaxed()"
(sha1:
b0c1264f534a1cb3c52036a23a04d238434a0df6)
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Mon, 20 Apr 2015 09:24:35 +0000 (10:24 +0100)]
arm64: kill flush_cache_all()
The documented semantics of flush_cache_all are not possible to provide
for arm64 (short of flushing the entire physical address space by VA),
and there are currently no users; KVM uses VA maintenance exclusively,
cpu_reset is never called, and the only two users outside of arch code
cannot be built for arm64.
While cpu_soft_reset and related functions (which call flush_cache_all)
were thought to be useful for kexec, their current implementations only
serve to mask bugs. For correctness kexec will need to perform
maintenance by VA anyway to account for system caches, line migration,
and other subtleties of the cache architecture. As the extent of this
cache maintenance will be kexec-specific, it should probably live in the
kexec code.
This patch removes flush_cache_all, and related unused components,
preventing further abuse.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Geoff Levand <geoff@infradead.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Anders Roxell [Mon, 27 Apr 2015 20:53:09 +0000 (22:53 +0200)]
arm64: Allow forced irq threading
Now its safe to allow forced interrupt threading for arm64,
all timer interrupts and the perf interrupt are marked NO_THREAD, as is
the case with arch/arm:
da0ec6f ARM: 7814/2: Allow forced irq threading
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Anders Roxell [Mon, 27 Apr 2015 20:53:08 +0000 (22:53 +0200)]
arm64: Mark PMU interrupt IRQF_NO_THREAD
Mark the PMU interrupts as non-threadable, as is the case with
arch/arm:
d9c3365 ARM: 7813/1: Mark pmu interupt IRQF_NO_THREAD
Acked-by: Will Deacon <will.deacon@arm.com>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Mon, 18 May 2015 17:13:47 +0000 (10:13 -0700)]
Linux 4.1-rc4
Peter Zijlstra [Mon, 18 May 2015 09:31:50 +0000 (11:31 +0200)]
watchdog: Fix merge 'conflict'
Two watchdog changes that came through different trees had a non
conflicting conflict, that is, one changed the semantics of a variable
but no actual code conflict happened. So the merge appeared fine, but
the resulting code did not behave as expected.
Commit
195daf665a62 ("watchdog: enable the new user interface of the
watchdog mechanism") changes the semantics of watchdog_user_enabled,
which thereafter is only used by the functions introduced by
b3738d293233 ("watchdog: Add watchdog enable/disable all functions").
There further appears to be a distinct lack of serialization between
setting and using watchdog_enabled, so perhaps we should wrap the
{en,dis}able_all() things in watchdog_proc_mutex.
This patch fixes a s2r failure reported by Michal; which I cannot
readily explain. But this does make the code internally consistent
again.
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 18 May 2015 17:01:54 +0000 (10:01 -0700)]
Merge tag 'for-linus-
20150516' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Two MTD fixes for 4.1:
- readtest: the signal-handling code was clobbering the error codes
we should be handling/reporting in this test, rendering it useless.
Noticed by Coverity.
- the common SPI NOR flash DT binding (merged for 4.1-rc1) is being
revised, so let's change that before 4.1 is minted"
* tag 'for-linus-
20150516' of git://git.infradead.org/linux-mtd:
Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
mtd: readtest: don't clobber error reports
Linus Torvalds [Sun, 17 May 2015 04:15:59 +0000 (21:15 -0700)]
Merge tag 'usb-4.1-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes and new device ids for 4.1-rc4.
All are pretty minor, and have been in linux-next successfully"
* tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
Added another USB product ID for ELAN touchscreen quirks.
xhci: gracefully handle xhci_irq dead device
xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
xhci: fix isoc endpoint dequeue from advancing too far on transaction error
usb: chipidea: debug: avoid out of bound read
USB: visor: Match I330 phone more precisely
USB: pl2303: Remove support for Samsung I330
USB: cp210x: add ID for KCF Technologies PRN device
usb: gadget: remove incorrect __init/__exit annotations
usb: phy: isp1301: work around tps65010 dependency
usb: gadget: serial: fix re-ordering of tx data
usb: gadget: hid: Fix static variable usage
usb: gadget: configfs: Fix interfaces array NULL-termination
usb: gadget: xilinx: fix devm_ioremap_resource() check
usb: dwc3: dwc3-omap: correct the register macros
Linus Torvalds [Sun, 17 May 2015 04:10:05 +0000 (21:10 -0700)]
Merge tag 'tty-4.1-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here's some TTY and serial driver fixes for reported issues.
All of these have been in linux-next successfully"
* tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pty: Fix input race when closing
tty/n_gsm.c: fix a memory leak when gsmtty is removed
Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
serial: omap: Fix error handling in probe
earlycon: Revert log warnings
Linus Torvalds [Sun, 17 May 2015 04:04:56 +0000 (21:04 -0700)]
Merge tag 'staging-4.1-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging / IIO driver fixes from Greg KH:
"Here's some staging and iio driver fixes to resolve a number of
reported issues.
All of these have been in linux-next for a while"
* tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits)
iio: light: hid-sensor-prox: Fix memory leak in probe()
iio: adc:
cc10001: Add delay before setting START bit
iio: adc:
cc10001: Fix regulator_get_voltage() return value check
iio: adc:
cc10001: Fix incorrect use of power-up/power-down register
staging: gdm724x: Correction of variable usage after applying ALIGN()
iio: adc:
cc10001: Fix the channel number mapping
staging: vt6655: lock MACvWriteBSSIDAddress.
staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value.
staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC
staging: vt6655: Fix 80211 control and management status reporting.
staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED
staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe
staging: vt6656: use ieee80211_tx_info to select packet type.
staging: rtl8712: freeing an ERR_PTR
staging: sm750: remove incorrect __exit annotation
iio: kfifo: Set update_needed to false only if a buffer was allocated
iio: mcp320x: Fix occasional incorrect readings
iio: accel: mma9553: check input value for activity period
iio: accel: mma9553: add enable channel for activity
iio: accel: mma9551_core: prevent buffer overrun
...
Linus Torvalds [Sun, 17 May 2015 03:48:42 +0000 (20:48 -0700)]
Merge tag 'char-misc-4.1-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is one fix, in the extcon subsystem, that resolves a reported
issue.
It's been in linux-next for a number of weeks now, sorry for not
getting it to you sooner"
* tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
extcon: usb-gpio: register extcon device before IRQ registration
Linus Torvalds [Sat, 16 May 2015 23:33:59 +0000 (16:33 -0700)]
Merge branch 'for-linus-4.1-rc4' of git://git./linux/kernel/git/rw/uml
Pull UML hostfs fix from Richard Weinberger:
"This contains a single fix for a regression introduced in 4.1-rc1"
* 'for-linus-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
hostfs: Use correct mask for file mode
Linus Torvalds [Sat, 16 May 2015 23:28:01 +0000 (16:28 -0700)]
Merge tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs
Pull UBI bufix from Richard Weinberger:
"This contains a single bug fix for the UBI block driver"
* tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs:
UBI: block: Add missing cache flushes
Linus Torvalds [Sat, 16 May 2015 22:55:31 +0000 (15:55 -0700)]
Merge tag 'for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of ext4 bugs; the most serious of which is a bug in the
lazytime mount optimization code where we could end up updating the
timestamps to the wrong inode"
* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix an ext3 collapse range regression in xfstests
jbd2: fix r_count overflows leading to buffer overflow in journal recovery
ext4: check for zero length extent explicitly
ext4: fix NULL pointer dereference when journal restart fails
ext4: remove unused function prototype from ext4.h
ext4: don't save the error information if the block device is read-only
ext4: fix lazytime optimization
Linus Torvalds [Sat, 16 May 2015 22:50:58 +0000 (15:50 -0700)]
Merge branch 'for-linus-4.1' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"The first commit is a fix from Filipe for a very old extent buffer
reuse race that triggered a BUG_ON. It hasn't come up often, I looked
through old logs at FB and we hit it a handful of times over the last
year.
The rest are other corners he hit during testing"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON
Btrfs: fix race between block group creation and their cache writeout
Btrfs: fix panic when starting bg cache writeout after IO error
Btrfs: fix crash after inode cache writeback failure
Linus Torvalds [Sat, 16 May 2015 22:46:30 +0000 (15:46 -0700)]
Merge branch 'master' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Seven small fixes. The shortlog below is a good description so no
need to elaborate.
It has sat in linux-next and survived the usual automated testing by
Imagination's test farm"
* 'master' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: tlb-r4k: Fix PG_ELPA comment
MIPS: Fix up obsolete cpu_set usage
MIPS: IP32: Fix build errors in reset code in DS1685 platform hook.
MIPS: KVM: Fix unused variable build warning
MIPS: traps: remove extra Tainted: line from __show_regs() output
MIPS: Fix wrong CHECKFLAGS (sparse builds) with GCC 5.1
MIPS: Fix a preemption issue with thread's FPU defaults
Linus Torvalds [Sat, 16 May 2015 22:40:07 +0000 (15:40 -0700)]
Merge tag 'arc-4.1-fixes' of git://git./linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta.
* tag 'arc-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: inline cache flush toggle helpers
ARC: With earlycon in use, retire EARLY_PRINTK
ARC: unbork !LLSC build
Linus Torvalds [Sat, 16 May 2015 22:33:25 +0000 (15:33 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Nothing frightening this time, just smaller fixes in a number of
places.
The other changes contained here are:
MAINTAINERS file updates:
- The mach-gemini maintainer is back in action and has a new git tree
- Krzysztof Kozlowski has volunteered to be a new co-maintainer for
the samsung platforms
- updates to the files that belong to Marvell mvebu
Bug fixes:
- The largest changes are on omap2, but are only to avoid some
harmless warnings and to fix reset on omap4
- a small regression fix on tegra
- multiple fixes for incorrect IRQ affinity on vexpress
- the missing system controller on arm64 juno is added
- one revert of a patch that was accidentally applied twice for
mach-rockchip
- two clock related DT fixes for mvebu
- a workaround for suspend with old DT binaries on new exynos kernels
- Another fix for suspend on exynos, needs to be backported"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
MAINTAINERS: Add dts entries for some of the Marvell SoCs
MAINTAINERS: ARM: EXYNOS: Add Krzysztof Kozlowski as co-maintainer
ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4
ARM: EXYNOS: Fix failed second suspend on Exynos4
Revert "ARM: rockchip: fix undefined instruction of reset_ctrl_regs"
ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider
ARM: EXYNOS: Don't try to initialize suspend on old DT
ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards
ARM: gemini: fix compiler warning due wrong data type
ARM: vexpress/tc2: Add interrupt-affinity to the PMU node
ARM: vexpress/ca9: Add interrupt-affinity to the PMU node
ARM: vexpress/ca9: Add unified-cache property to l2 cache node
ARM64: juno: add sp810 support and fix sp804 clock frequency
ARM: Gemini: Maintainers update
ARM: OMAP2+: Remove bogus struct clk comparison for timer clock
ARM: dove: Add clock-names to CuBox Si5351 clk generator
ARM: AM33xx+: hwmod: re-use omap4 implementations for reset functionality
ARM: OMAP4+: PRM: add support for passing status register/bit info to reset
ARM: AM43xx: hwmod: add VPFE hwmod entries
ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
...
Linus Torvalds [Sat, 16 May 2015 22:27:33 +0000 (15:27 -0700)]
Merge branch 'for-rc' of git://git./linux/kernel/git/rzhang/linux
Pull thermal fixes from Zhang Rui:
"Specifics:
- fix an issue in intel_powerclamp driver that idle injection target
is not accurately maintained on newer Intel CPUs. Package C8 to
C10 states are introduced on these CPUs but they were not included
in the package c-state residency calculation. From Jacob Pan.
- fix a problem that package c-state idle injection was missing on
Broadwell server, by adding its id to intel_powerclamp driver.
From Jacob Pan.
- a couple of small fixes and cleanups from Joe Perches, Mathias
Krause, Dan Carpenter and Anand Moon"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tools/thermal: tmon: fixed the 'make install' command
thermal: rockchip: fix an error code
thermal/powerclamp: fix missing newer package c-states
thermal/intel_powerclamp: add id for broadwell server
thermal/intel_powerclamp: add __init / __exit annotations
thermal: Use bool function return values of true/false not 1/0
Linus Torvalds [Sat, 16 May 2015 22:03:52 +0000 (15:03 -0700)]
Merge tag 'linux-kselftest-4.1-rc4' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new
x86 test due to its hard dependency on 32-bit build environment.
A set of 5 patches fix the make kselftest run and kselftest install"
* tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests, x86: Rework x86 target architecture detection
selftests, x86: Remove useless run_tests rule
selftests/x86: install tests
selftest/x86: have no dependency on all when cross building
selftest/x86: build both bitnesses
Linus Torvalds [Fri, 15 May 2015 20:06:06 +0000 (13:06 -0700)]
Merge branch 'parisc-4.1-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"One important patch which fixes crashes due to stack randomization on
architectures where the stack grows upwards (currently parisc and
metag only).
This bug went unnoticed on parisc since kernel 3.14 where the flexible
mmap memory layout support was added by commit
9dabf60dc4ab. The
changes in fs/exec.c are inside an #ifdef CONFIG_STACK_GROWSUP section
and will not affect other platforms.
The other two patches rename args of the kthread_arg() function and
fixes a printk output"
* 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures
parisc: copy_thread(): rename 'arg' argument to 'kthread_arg'
parisc: %pf is only for function pointers
Brian Norris [Thu, 14 May 2015 17:32:53 +0000 (10:32 -0700)]
Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
In commit
8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding"), we added a generic "nor-jedec" binding to catch all
mostly-compatible SPI NOR flash which can be detected via the READ ID
opcode (0x9F). This was discussed and reviewed at the time, however
objections have come up since then as part of this discussion:
http://lkml.kernel.org/g/
20150511224646.GJ32500@ld-irv-0074
It seems the parties involved agree that "jedec,spi-nor" does a better
job of capturing the fact that this is SPI-specific, not just any NOR
flash.
This binding was only merged for v4.1-rc1, so it's still OK to change
the naming.
At the same time, let's move the documentation to a better name.
Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the
documentation.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
James Hogan [Wed, 13 May 2015 10:50:55 +0000 (11:50 +0100)]
MIPS: tlb-r4k: Fix PG_ELPA comment
The ELPA bit in PageGrain is all about large *physical* addresses, so
correct the reference to "large virtual address" in the comment above
where it is set for MIPS64.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10038/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ezequiel Garcia [Tue, 28 Apr 2015 21:34:23 +0000 (18:34 -0300)]
MIPS: Fix up obsolete cpu_set usage
cpu_set was removed (along with a bunch of cpumask helpers) by
commit
2f0f267ea072 ("cpumask: remove deprecated functions.").
Fix this by replacing cpu_set with cpumask_set_cpu. Without this
fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y.
arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup':
arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration]
Fixes: 90db024f140d ("MIPS: smp-cps: cpu_set FPU mask if FPU present")
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Acked-by: Niklas Cassel <niklass@axis.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9912/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Fri, 15 May 2015 20:01:31 +0000 (13:01 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 build fix from Ingo Molnar:
"A bzImage build fix on older distros"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Fix 'make bzImage' on older distros
Linus Torvalds [Fri, 15 May 2015 19:42:33 +0000 (12:42 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two fixes: a suspend/resume related regression fix, and an RT priority
boosting fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix regression in cpuset_cpu_inactive() for suspend
sched: Handle priority boosted tasks proper in setscheduler()
Linus Torvalds [Fri, 15 May 2015 19:38:21 +0000 (12:38 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also a lockdep annotation fix, a PMU event
list fix and a new model addition"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/liblockdep: Fix compilation error
tools/liblockdep: Fix linker error in case of cross compile
perf tools: Use getconf to determine number of online CPUs
tools: Fix tools/vm build
perf/x86/rapl: Enable Broadwell-U RAPL support
perf/x86/intel: Fix SLM cache event list
perf: Annotate inherited event ctx->mutex recursion
Linus Torvalds [Fri, 15 May 2015 19:34:05 +0000 (12:34 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"A tegra irqchip driver memory corruption fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: tegra: Set the proper base address in irq chip data
Linus Torvalds [Fri, 15 May 2015 18:44:30 +0000 (11:44 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Radeon:
one oops fix, one bug fix, one pci id addition patch
i915:
one suspend/resume regression fix.
All seems quiet enough."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: don't do mst probing if MST isn't enabled.
drm/radeon: add new bonaire pci id
drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling
drm/i915: Avoid GPU hang when coming out of s3 or s4
Linus Torvalds [Fri, 15 May 2015 18:17:41 +0000 (11:17 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, numa: really disable NUMA balancing by default on single node machines
MAINTAINERS: update Jingoo Han's email address
CMA: page_isolation: check buddy before accessing it
uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER
kernfs: do not account ino_ida allocations to memcg
gfp: add __GFP_NOACCOUNT
tools/vm: fix page-flags build
drivers/rtc/rtc-armada38x.c: remove unused local `flags'
Arnd Bergmann [Fri, 15 May 2015 15:14:48 +0000 (17:14 +0200)]
Merge tag 'samsung-fixes-2' of git://git./linux/kernel/git/kgene/linux-samsung into fixes
Merge "Samsung 2nd fixes for v4.1" from Kukjin Kim:
- fix second S2R on exynos4412 based Trats2, Odroid U3 boards which
happened after enabling L2$ and caused by commit
13cfa6c4f7fa ("ARM:
EXYNOS: Fix CPU idle clock down after CPU off")
And replace the soc_is_exynosxxx() macro with of_compatible_xxx
- fix dereference of ERR_PTR of of_genpd_get_from_provider()
- fix suspend problem on old DT machines to skip the initialization
suspend and caused by commit
8b283c025443 ("ARM: exynos4/5: convert
pmu wakeup to stacked domains")
- add keep-power-in-suspend for Peach Boards to support S2R and has
been missed in previous pull-request for fixes
* tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4
ARM: EXYNOS: Fix failed second suspend on Exynos4
ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider
ARM: EXYNOS: Don't try to initialize suspend on old DT
ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards
Arnd Bergmann [Fri, 15 May 2015 15:13:06 +0000 (17:13 +0200)]
Merge tag 'mvebu-fixes-4.1-2' of git://git.infradead.org/linux-mvebu into fixes
Merge "mvebu fixes for 4.1 (part 2)" from Gregory CLEMENT:
Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
Add clock-names to CuBox Si5351 clk generator
Add dts entries in the MAINTAINERS file
* tag 'mvebu-fixes-4.1-2' of git://git.infradead.org/linux-mvebu:
MAINTAINERS: Add dts entries for some of the Marvell SoCs
ARM: dove: Add clock-names to CuBox Si5351 clk generator
ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
Gregory CLEMENT [Fri, 15 May 2015 12:25:43 +0000 (14:25 +0200)]
MAINTAINERS: Add dts entries for some of the Marvell SoCs
Since many releases, the modifications of the mvebu and berlin device
tree files are merged through the mvebu subsystem. This patch makes it
official in order to help the contributors using the get_maintainer.pl
to find the accurate peoples.
In the same time, updated the mvebu description which now includes the
kirkwood SoCs and new Armada SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Ingo Molnar [Fri, 15 May 2015 06:43:15 +0000 (08:43 +0200)]
Merge branch 'liblockdep-fixes' of git://git./linux/kernel/git/sashal/linux into perf/urgent
Pull liblockdep fixes from Sasha Levin:
"two fixes that deal with compilation errors in liblockdep."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Fri, 15 May 2015 05:21:18 +0000 (15:21 +1000)]
Merge tag 'drm-intel-fixes-2015-05-13' of git://anongit.freedesktop.org/drm-intel into drm-fixes
fix one gpu hang on resume.
* tag 'drm-intel-fixes-2015-05-13' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Avoid GPU hang when coming out of s3 or s4
Dave Airlie [Fri, 15 May 2015 05:20:45 +0000 (15:20 +1000)]
Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
radeon minor fixes, and pci id addition.
* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: don't do mst probing if MST isn't enabled.
drm/radeon: add new bonaire pci id
drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling
Theodore Ts'o [Fri, 15 May 2015 04:24:10 +0000 (00:24 -0400)]
ext4: fix an ext3 collapse range regression in xfstests
The xfstests test suite assumes that an attempt to collapse range on
the range (0, 1) will return EOPNOTSUPP if the file system does not
support collapse range. Commit
280227a75b56: "ext4: move check under
lock scope to close a race" broke this, and this caused xfstests to
fail when run when testing file systems that did not have the extents
feature enabled.
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Fri, 15 May 2015 01:40:16 +0000 (18:40 -0700)]
Merge tag 'pm+acpi-4.1-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Two fixes here, one revert of a recent ACPICA commit that broke audio
support on one Dell machine and a fix for a long-standing issue that
may cause systems to break randomly during boot.
Specifics:
- The recent ACPICA commit that set the ACPI _REV return value to 2
(which is the value always used by Windows and now mandated by the
spec too) in order to prevent the firmware people from using it to
play tricks with us caused a serious audio regression to happen on
Dell XPS 13 (the AML on that machine uses the _REV return value to
decide how to expose audio to the OS and does that to hide the lack
of proper support for its I2S audio in Linux), so revert that
commit for now and we'll revisit the issue in the next cycle.
- Ensure that the ordering of acpi_reserve_resources() with respect
to the rest of the ACPI initialization sequence will always be the
same, or the IO or memory region occupied by the ACPI fixed
registers may be assigned to a PCI host bridge as a result of a
race and random breakage ensues going forward"
* tag 'pm+acpi-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Permanently set _REV to the value '2'."
ACPI / init: Fix the ordering of acpi_reserve_resources()
Linus Torvalds [Fri, 15 May 2015 01:35:33 +0000 (18:35 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- fix potential memory leak in perf PMU probing
- BPF sign extension fix for 64-bit immediates
- fix build failure with unusual configuration
- revert unused and broken branch patching from alternative code
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: fix memory leak when probing PMU PPIs
arm64: bpf: fix signedness bug in loading 64-bit immediate
arm64: mm: Fix build error with CONFIG_SPARSEMEM_VMEMMAP disabled
Revert "arm64: alternative: Allow immediate branch as alternative instruction"
Linus Torvalds [Fri, 15 May 2015 01:02:15 +0000 (18:02 -0700)]
Merge branch 'dmi-for-linus' of git://git./linux/kernel/git/jdelvare/staging
Pull dmi fixes from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi_scan: Fix ordering of product_uuid
firmware: dmi_scan: Simplified displayed version
Mel Gorman [Thu, 14 May 2015 22:17:09 +0000 (15:17 -0700)]
mm, numa: really disable NUMA balancing by default on single node machines
NUMA balancing is meant to be disabled by default on UMA machines but
the check is using nr_node_ids (highest node) instead of
num_online_nodes (online nodes).
The consequences are that a UMA machine with a node ID of 1 or higher
will enable NUMA balancing. This will incur useless overhead due to
minor faults with the impact depending on the workload. These are the
impact on the stats when running a kernel build on a single node machine
whose node ID happened to be 1:
vanilla patched
NUMA base PTE updates
5113158 0
NUMA huge PMD updates 643 0
NUMA page range updates
5442374 0
NUMA hint faults
2109622 0
NUMA hint local faults
2109622 0
NUMA hint local percent 100 100
NUMA pages migrated 0 0
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [3.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Thu, 14 May 2015 22:17:07 +0000 (15:17 -0700)]
MAINTAINERS: update Jingoo Han's email address
Change my private email address.
Signed-off-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hui Zhu [Thu, 14 May 2015 22:17:04 +0000 (15:17 -0700)]
CMA: page_isolation: check buddy before accessing it
I had an issue:
Unable to handle kernel NULL pointer dereference at virtual address
0000082a
pgd =
cc970000
[
0000082a] *pgd=
00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
PC is at get_pageblock_flags_group+0x5c/0xb0
LR is at unset_migratetype_isolate+0x148/0x1b0
pc : [<
c00cc9a0>] lr : [<
c0109874>] psr:
80000093
sp :
c7029d00 ip :
00000105 fp :
c7029d1c
r10:
00000001 r9 :
0000000a r8 :
00000004
r7 :
60000013 r6 :
000000a4 r5 :
c0a357e4 r4 :
00000000
r3 :
00000826 r2 :
00000002 r1 :
00000000 r0 :
0000003f
Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control:
10c5387d Table:
2cb7006a DAC:
00000015
Backtrace:
get_pageblock_flags_group+0x0/0xb0
unset_migratetype_isolate+0x0/0x1b0
undo_isolate_page_range+0x0/0xdc
__alloc_contig_range+0x0/0x34c
alloc_contig_range+0x0/0x18
This issue is because when calling unset_migratetype_isolate() to unset
a part of CMA memory, it try to access the buddy page to get its status:
if (order >= pageblock_order) {
page_idx = page_to_pfn(page) & ((1 << MAX_ORDER) - 1);
buddy_idx = __find_buddy_index(page_idx, order);
buddy = page + (buddy_idx - page_idx);
if (!is_migrate_isolate_page(buddy)) {
But the begin addr of this part of CMA memory is very close to a part of
memory that is reserved at boot time (not in buddy system). So add a
check before accessing it.
[akpm@linux-foundation.org: use conventional code layout]
Signed-off-by: Hui Zhu <zhuhui@xiaomi.com>
Suggested-by: Laura Abbott <labbott@redhat.com>
Suggested-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Josh Triplett [Thu, 14 May 2015 22:17:01 +0000 (15:17 -0700)]
uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER
{u,g}id_valid call {u,g}id_eq, which calls __k{u,g}id_val on both
arguments and compares. With !CONFIG_MULTIUSER, __k{u,g}id_val return a
constant 0, which makes {u,g}id_valid always return false. Change
{u,g}id_valid to compare their argument against -1 instead. That produces
identical results in the normal CONFIG_MULTIUSER=y case, but with
!CONFIG_MULTIUSER will make {u,g}id_valid constant-fold into "return
true;" rather than "return false;".
This fixes uses of devpts without CONFIG_MULTIUSER.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>,
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Thu, 14 May 2015 22:16:58 +0000 (15:16 -0700)]
kernfs: do not account ino_ida allocations to memcg
root->ino_ida is used for kernfs inode number allocations. Since IDA has
a layered structure, different IDs can reside on the same layer, which
is currently accounted to some memory cgroup. The problem is that each
kmem cache of a memory cgroup has its own directory on sysfs (under
/sys/fs/kernel/<cache-name>/cgroup). If the inode number of such a
directory or any file in it gets allocated from a layer accounted to the
cgroup which the cache is created for, the cgroup will get pinned for
good, because one has to free all kmem allocations accounted to a cgroup
in order to release it and destroy all its kmem caches. That said we
must not account layers of ino_ida to any memory cgroup.
Since per net init operations may create new sysfs entries directly
(e.g. lo device) or indirectly (nf_conntrack creates a new kmem cache
per each namespace, which, in turn, creates new sysfs entries), an easy
way to reproduce this issue is by creating network namespace(s) from
inside a kmem-active memory cgroup.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> [4.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Thu, 14 May 2015 22:16:55 +0000 (15:16 -0700)]
gfp: add __GFP_NOACCOUNT
Not all kmem allocations should be accounted to memcg. The following
patch gives an example when accounting of a certain type of allocations to
memcg can effectively result in a memory leak. This patch adds the
__GFP_NOACCOUNT flag which if passed to kmalloc and friends will force the
allocation to go through the root cgroup. It will be used by the next
patch.
Note, since in case of kmemleak enabled each kmalloc implies yet another
allocation from the kmemleak_object cache, we add __GFP_NOACCOUNT to
gfp_kmemleak_mask.
Alternatively, we could introduce a per kmem cache flag disabling
accounting for all allocations of a particular kind, but (a) we would not
be able to bypass accounting for kmalloc then and (b) a kmem cache with
this flag set could not be merged with a kmem cache without this flag,
which would increase the number of global caches and therefore
fragmentation even if the memory cgroup controller is not used.
Despite its generic name, currently __GFP_NOACCOUNT disables accounting
only for kmem allocations while user page allocations are always charged.
To catch abusing of this flag, a warning is issued on an attempt of
passing it to mem_cgroup_try_charge.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> [4.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Thu, 14 May 2015 22:16:53 +0000 (15:16 -0700)]
tools/vm: fix page-flags build
libabikfs.a doesn't exist anymore, so we now need to link with libapi.a.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Thu, 14 May 2015 22:16:50 +0000 (15:16 -0700)]
drivers/rtc/rtc-armada38x.c: remove unused local `flags'
Reported-by: Fengguang Wu <fengguang.wu@gmail.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Darrick J. Wong [Thu, 14 May 2015 23:11:50 +0000 (19:11 -0400)]
jbd2: fix r_count overflows leading to buffer overflow in journal recovery
The journal revoke block recovery code does not check r_count for
sanity, which means that an evil value of r_count could result in
the kernel reading off the end of the revoke table and into whatever
garbage lies beyond. This could crash the kernel, so fix that.
However, in testing this fix, I discovered that the code to write
out the revoke tables also was not correctly checking to see if the
block was full -- the current offset check is fine so long as the
revoke table space size is a multiple of the record size, but this
is not true when either journal_csum_v[23] are set.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Eryu Guan [Thu, 14 May 2015 23:00:45 +0000 (19:00 -0400)]
ext4: check for zero length extent explicitly
The following commit introduced a bug when checking for zero length extent
5946d08 ext4: check for overlapping extents in ext4_valid_extent_entries()
Zero length extent could pass the check if lblock is zero.
Adding the explicit check for zero length back.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Lukas Czerner [Thu, 14 May 2015 22:55:18 +0000 (18:55 -0400)]
ext4: fix NULL pointer dereference when journal restart fails
Currently when journal restart fails, we'll have the h_transaction of
the handle set to NULL to indicate that the handle has been effectively
aborted. We handle this situation quietly in the jbd2_journal_stop() and just
free the handle and exit because everything else has been done before we
attempted (and failed) to restart the journal.
Unfortunately there are a number of problems with that approach
introduced with commit
41a5b913197c "jbd2: invalidate handle if jbd2_journal_restart()
fails"
First of all in ext4 jbd2_journal_stop() will be called through
__ext4_journal_stop() where we would try to get a hold of the superblock
by dereferencing h_transaction which in this case would lead to NULL
pointer dereference and crash.
In addition we're going to free the handle regardless of the refcount
which is bad as well, because others up the call chain will still
reference the handle so we might potentially reference already freed
memory.
Moreover it's expected that we'll get aborted handle as well as detached
handle in some of the journalling function as the error propagates up
the stack, so it's unnecessary to call WARN_ON every time we get
detached handle.
And finally we might leak some memory by forgetting to free reserved
handle in jbd2_journal_stop() in the case where handle was detached from
the transaction (h_transaction is NULL).
Fix the NULL pointer dereference in __ext4_journal_stop() by just
calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix
the potential memory leak in jbd2_journal_stop() and use proper
handle refcounting before we attempt to free it to avoid use-after-free
issues.
And finally remove all WARN_ON(!transaction) from the code so that we do
not get random traces when something goes wrong because when journal
restart fails we will get to some of those functions.
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Theodore Ts'o [Thu, 14 May 2015 22:43:36 +0000 (18:43 -0400)]
ext4: remove unused function prototype from ext4.h
The ext4_extent_tree_init() function hasn't been in the ext4 code for
a long time ago, except in an unused function prototype in ext4.h
Google-Bug-Id:
4530137
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Theodore Ts'o [Thu, 14 May 2015 22:37:30 +0000 (18:37 -0400)]
ext4: don't save the error information if the block device is read-only
Google-Bug-Id:
20939131
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rafael J. Wysocki [Thu, 14 May 2015 22:31:23 +0000 (00:31 +0200)]
Merge branches 'acpi-init' and 'acpica'
* acpi-init:
ACPI / init: Fix the ordering of acpi_reserve_resources()
* acpica:
Revert "ACPICA: Permanently set _REV to the value '2'."
Theodore Ts'o [Thu, 14 May 2015 22:19:01 +0000 (18:19 -0400)]
ext4: fix lazytime optimization
We had a fencepost error in the lazytime optimization which means that
timestamp would get written to the wrong inode.
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Greg Kroah-Hartman [Thu, 14 May 2015 19:43:36 +0000 (12:43 -0700)]
Merge tag 'usb-serial-4.1-rc4' of git://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.1-rc4
Here are a few device-id changes removing a duplicate entry, refining
another and adding a third.
Signed-off-by: Johan Hovold <johan@kernel.org>
This page took 0.053977 seconds and 5 git commands to generate.