Masanari Iida [Wed, 27 May 2015 14:51:51 +0000 (23:51 +0900)]
staging: gdm72xx: Fix typos in printk
This patch fix 2 spelling typos in printk within gdm72xx.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaime Arrocha [Tue, 26 May 2015 18:14:05 +0000 (13:14 -0500)]
staging: gdm724x: Remove test for host endian
gdm_endian.c: small changes were done to remove testing for host
endianness and in-driver conversion for byte-ordering.
The linux/kernel.h functions are used now.
gdm_endian.h: removal of code no longer needed with changes
in gdm_endian.c.
Signed-off-by: Jaime Arrocha <jarr@kerneldev.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Mc Guire [Wed, 27 May 2015 16:02:38 +0000 (18:02 +0200)]
staging: rts5208: pass timeout as HZ independent value
schedule_timeout takes a timeout in jiffies but the code currently is
passing in a constant POLLING_INTERVAL which makes this timeout HZ
dependent, so pass it through msecs_to_jiffies() to fix this up.
patch was compile tested for x86_64_defconfig + CONFIG_STAGING=y,
CONFIG_RTS5208=m
Patch is against 4.0-rc5 (localversion-next is -next-
20150527)
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akinobu Mita [Sat, 16 May 2015 07:17:51 +0000 (16:17 +0900)]
staging: rts5208: fix transfer length 0 for 6-byte r/w commands
For 6-byte r/w commands, transfer length 0 means 256 blocks of data,
not 0 block.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Micky Ching <micky_ching@realsil.com.cn>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Senna Tschudin [Tue, 19 May 2015 09:44:46 +0000 (11:44 +0200)]
staging: goldfish: Fix pointer cast for 32 bits
As the first argument of gf_write64() was of type unsigned long, and as
some calls to gf_write64() were casting the first argument from void *
to u64 the compiler and/or sparse were printing warnings for casts of
wrong sizes when compiling for i386.
This patch changes the type of the first argument of gf_write64() to
const void *, and update calls to the function. This change fixed the
warnings and allowed to remove casts from 3 calls to gf_write64().
In addition gf_write64() was renamed to gf_write_ptr() as the name was
misleading because it only writes 32 bits on 32 bit systems.
gf_write_dma_addr() was added to handle dma_addr_t values which is
used at drivers/staging/goldfish/goldfish_audio.c.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Dowad [Sun, 17 May 2015 17:19:37 +0000 (19:19 +0200)]
staging: ft1000: Remove empty branch from conditional
This fixes a checkpatch style warning in ft1000_ioctl.
Signed-off-by: Alex Dowad <alexinbeijing@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Cronin [Fri, 15 May 2015 20:02:40 +0000 (13:02 -0700)]
Staging: dgap: dgap: Fixed spelling errors
Fixed comment spelling errors
Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Guo [Sat, 30 May 2015 08:10:46 +0000 (16:10 +0800)]
STAGING: Declare request_cache as static for drivers/staging/lustre/lustre/ptlrpc/client.c
Declare request_cache variable as static. It is only used by
drivers/staging/lustre/lustre/ptlrpc/client.c, and its naming is common
which will lead to namespace pollution.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 29 May 2015 22:27:47 +0000 (18:27 -0400)]
staging/lustre: Update header license for lustre_dlm_flags.h
lustre_dlm_flags.h was autogenerated with a wrong script that
mistakenly stated it is GPLv3 when in fact it should be GPLv2.
Also since we are no longer autogenerating this header, drop
all such mentionings.
Reported by: George G. Davis <ggdavisiv@gmail.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6599
Reviewed-on: http://review.whamcloud.com/14797
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
CC: George G. Davis <ggdavisiv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Thu, 28 May 2015 21:02:23 +0000 (23:02 +0200)]
staging/lustre/mdc: drop unneeded goto
Delete jump to a label on the next line, when that label is not
used elsewhere.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r@
identifier l;
@@
-if (...) goto l;
-l:
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcus Folkesson [Thu, 28 May 2015 09:21:19 +0000 (11:21 +0200)]
staging: lustre: fix non-static symbol warnings reported by sparse
Warnings reported by sparse:
drivers/staging/lustre/lustre/ptlrpc/pinger.c:94:5:
warning: symbol 'ptlrpc_ping' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/pinger.c:113:6:
warning: symbol 'ptlrpc_update_next_ping' was not declared. Should it be static
drivers/staging/lustre/lustre/ptlrpc/pinger.c:144:6:
warning: symbol 'pinger_check_timeout' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/pinger.c:425:21:
warning: symbol 'ptlrpc_new_timeout' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/pinger.c:551:1:
warning: symbol 'pet_list' was not declared. Should it be static?
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Thu, 21 May 2015 19:32:27 +0000 (15:32 -0400)]
staging/lustre/obd: move status files from procfs to debugfs
change type of
* obd->obd_proc_entry
* obd->obd_svc_procroot
* lov->lov_pool_proc_entry
* obd_type->typ_procroot
* pool_desc->pool_proc_entry
Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Thu, 21 May 2015 19:32:26 +0000 (15:32 -0400)]
staging/lustre/fld: move all files from procfs to debugfs
Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Thu, 21 May 2015 19:32:25 +0000 (15:32 -0400)]
staging/lustre/fid: move all files from procfs to debugfs
Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Thu, 21 May 2015 19:32:24 +0000 (15:32 -0400)]
staging/lustre/obdclass: remove unused sysctl enum definition
Since we are removing lustre sysctls, this enum is no longer needed.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:23 +0000 (15:32 -0400)]
staging/lustre/lmv: Move suitable entries from procfs to sysfs
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:22 +0000 (15:32 -0400)]
staging/lustre/lov: Move suitable variables from procfs to sysfs
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:21 +0000 (15:32 -0400)]
staging/lustre/osc: move suitable values from procfs to sysfs
All single-value controls are moved from /proc/fs/lustre/osc/.../
to /sys/fs/lustre/osc/.../
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:20 +0000 (15:32 -0400)]
staging/lustre/mdc: move mdc-specific procfs files to sysfs
This moves max_rpcs_in_flight and max_pages_per_rpc to
/proc/fs/lustre/mdc/.../
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:18 +0000 (15:32 -0400)]
staging/lustre/llite: make llite/lov and lmv symlinks
old proc code had /proc/sys/fs/lustre/llite/.../lov and lmv
dirs that contained name of the dir in lustre/lov and lustre/lmv
to better be able to find correct obd device there, but
I imagien a better solution would be to just create a symlink with
the same name. The name is then pointless and the target dir would
have uuid file just as if it was the old-style dir.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:17 +0000 (15:32 -0400)]
staging/lustre/obdclass: Move common obd proc files to sysfs
This moves uuid display and also underlying fs statistics.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:16 +0000 (15:32 -0400)]
staging/lustre/obdclass: Prepare for procfs to sysfs migration
Add necessary plumbing to register obd types and instances
under /sys/fs/lustre
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:15 +0000 (15:32 -0400)]
staging/lustre/obdecho: Remove procfs registration
obdecho client seems to be only registering useless proc values that
are of no use to anybody.
Remove them.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:14 +0000 (15:32 -0400)]
stagng/lustre/obdclass: Remove unused function lprocfs_rd_num_exports
This function is unused in client code.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:13 +0000 (15:32 -0400)]
staging/lustre: Remove useless num_refs procfs variable
Every obd type registers it, but it's not really needed by anybody.
Remove all the supporting infrastructure too.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Thu, 21 May 2015 19:32:12 +0000 (15:32 -0400)]
staging/lustre/ptlrpc: move sptlrpc procfs entry to debugfs
We might want eventuall split it into a bunch of
single-value sysfs entries, I imagine, but there is no urgent need now.
Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Thu, 21 May 2015 19:32:11 +0000 (15:32 -0400)]
staging/lustre/ldlm: move all remaining files from procfs to debugfs
Move all files except stats. It will be moved later after change
type of obddev->obd_proc_entry member.
Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:10 +0000 (15:32 -0400)]
staging/lustre/ptlrpc: move procfs high_priority_ratio file to sysfs
Move ptlrpc service high_priority_ratio entry from procfs to sysfs.
Currently in use only by ldlm callback service only in
/sys/fs/lustre/ldlm/services/ldlm_cbd/
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:09 +0000 (15:32 -0400)]
staging/lustre/ptlrpc: move procfs threads* files to sysfs
Move ptlrpc service threads_min, threads_max and threads_running
entries from procfs to sysfs.
Currently in use only by ldlm callback service only in
/sys/fs/lustre/ldlm/services/ldlm_cbd/
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:08 +0000 (15:32 -0400)]
staging/lustre/ptlrpc: Add infrastructure for sysfs migration
Added necessary plumbing for ptlrpc sysfs integration for registered
services, sysfs directory registration.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:07 +0000 (15:32 -0400)]
staging/lustre: move /proc/fs/lustre/devices to debugfs
the devices file prints out status information about all
obd devices in the system in human readable form.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:06 +0000 (15:32 -0400)]
staging/lustre: Add debugfs root
This is just plumbing for migrating remaining procfs to
debugfs support
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:05 +0000 (15:32 -0400)]
staging/lustre/ldlm: move procfs ldlm pool stats to sysfs
Suitable contents of /proc/fs/lustre/ldlm/namespaces/.../pools/
is moved to /sys/fs/lustre/ldlm/namespaces/.../pools/:
cancel_rate grant_plan grant_speed lock_volume_factor
server_lock_volume granted grant_rate limit recalc_period
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:04 +0000 (15:32 -0400)]
staging/lustre/ldlm: Add infrastructure to move ldlm pool controls to sysfs
This adds registration of /sys/fs/lustre/ldlm/namespaces/.../pool
dir.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:03 +0000 (15:32 -0400)]
staging/lustre/ldlm: remove server-side congested locks support
This code only makes sense on the server, also while we are at it
drop registration of server-side procfs values and
as all client side values were already moved to sysfs - also
drop now unused procfs helpers.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:02 +0000 (15:32 -0400)]
staging/lustre/ldlm: move namespaces/lru_max_age to sysfs
Move ldlm display of lru_max_age from procfs to sysfs
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:01 +0000 (15:32 -0400)]
staging/lustre/ldlm: move namespaces/lock_unused_count to sysfs
Move ldlm display of lock_unused_count from procfs to sysfs
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:32:00 +0000 (15:32 -0400)]
staging/lustre/ldlm: move namespaces/early_lock_cancel to sysfs
Move ldlm display of early_lock_cancel from procfs to sysfs
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:59 +0000 (15:31 -0400)]
staging/lustre/ldlm: move namespaces/lru_size to sysfs
Move ldlm display of lru_size from procfs to sysfs
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:58 +0000 (15:31 -0400)]
staging/lustre/ldlm: move namespace/lock_count to sysfs
Move ldlm display of lock_count from procfs to sysfs
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:57 +0000 (15:31 -0400)]
staging/lustre/ldlm: move namespaces/resource_count to sysfs
Move ldlm display of resource_count from procfs to sysfs
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:56 +0000 (15:31 -0400)]
staging/lustre/ldlm: move cancel_unused_locks_before_replay to sysfs
/proc/fs/lustre/ldlm/cancel_unused_locks_before_replay is
moved to /sys/fs/lustre/ldlm/cancel_unused_locks_before_replay
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:55 +0000 (15:31 -0400)]
staging/lustre/ldlm: Preparation to move /proc/fs/lustre/ldlm to sysfs
Add necessary infrastructure, register /sys/fs/lustre/ldlm,
/sys/fs/lustre/ldlm/namespaces and /sys/fs/lustre/ldlm/services
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:54 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/xattr_cache to sysfs
Move xattr_cache file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:53 +0000 (15:31 -0400)]
staging/lustre/llite: remove llite/*_cookiesize proc files
Since Lustre 2.5, cookiesize is unused on the clients since
MDS now does final object unlink by itself, so drop these
max_cookiesize and default_cookiesize files.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:52 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/*_easize to sysfs
Move max_easize and default_easize files from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:51 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/lazystatfs to sysfs
Move lazystatfs file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:50 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/statahead_{max, agl} to sysfs
Move statahead_max and statahead_agl files from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:49 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/stats_track* to sysfs
Move stats_track_pid, stats_track_ppid and stats_track_gid files
from /proc/fs/lustre/llite/* to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:48 +0000 (15:31 -0400)]
staging/lustre/llite: remove unused ll_max_rw_chunk
ll_max_rw_chunk seems to be unused ever since we implemented CLIO in 2.0,
so remove it and all supporting infrastructure.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:47 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/checksum_pages to sysfs
Move checksum_pages file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:46 +0000 (15:31 -0400)]
staging/lustre/llite: move llite/max_read_ahead_whole_mb to sysfs
Move max_read_ahead_whole_mb file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:45 +0000 (15:31 -0400)]
staging/lustre/llite: move llite/max_read_ahead_per_file_mb to sysfs
Move max_read_ahead_per_file_mb file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:44 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/max_read_ahead_mb to sysfs
Move max_read_ahead_mb file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:43 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/uuid to sysfs
Move uuid file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:42 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/fstype to sysfs
Move fstype file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:41 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/client_type to sysfs
Move client_type file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:40 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/files* to sysfs
Move filestotal and filesfree files from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:39 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/kbytes* to sysfs
Move kbytestotal, kbytesavail and kbytesfree files from
/proc/fs/lustre/llite/* to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:38 +0000 (15:31 -0400)]
staging/lustre/llite: move /proc/fs/lustre/llite/blocksize to sysfs
Move blocksize file from /proc/fs/lustre/llite/*/ to
/sys/fs/lustre/llite/*/blocksize
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:37 +0000 (15:31 -0400)]
staging/lustre/llite: Preparation to move /proc/fs/lustre/llite to sysfs
Add necessary infrastructure, add support for mountpoint
registration in /proc/fs/lustre/llite
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:36 +0000 (15:31 -0400)]
staging/lustre: Move /proc/fs/lustre root level files to sysfs
except devices, for now.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Thu, 21 May 2015 19:31:35 +0000 (15:31 -0400)]
staging/lustre: Generic helpers for sysfs
Add generic helpers to allow displaying oof lustre-specific values
in /sys/fs/lustre
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pedro Marzo Perez [Thu, 21 May 2015 00:25:19 +0000 (02:25 +0200)]
Staging: rtl8192u: Correct include indentation and openning braces at new line
Opening braces should never be in a new line.
Correct include indentation.
Signed-off-by: Pedro Marzo Perez <marzo.pedro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Cronin [Fri, 15 May 2015 06:33:34 +0000 (23:33 -0700)]
Staging: vt6656: device: Fixed spelling error
Fixed comment spelling error.
Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luis R. Rodriguez [Thu, 28 May 2015 19:39:07 +0000 (12:39 -0700)]
staging: xgifb: use arch_phys_wc_add() and ioremap_wc()
The same area used for ioremap() is used for the MTRR area.
Convert the driver from using the x86 specific MTRR code to
the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add()
will avoid MTRR if write-combining is available, in order to
take advantage of that also ensure the ioremap'd area is requested
as write-combining.
There are a few motivations for this:
a) Take advantage of PAT when available
b) Help bury MTRR code away, MTRR is architecture specific and on
x86 its replaced by PAT
c) Help with the goal of eventually using _PAGE_CACHE_UC over
_PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit
de33c442e titled "x86 PAT: fix performance drop for glx,
use UC minus for ioremap(), ioremap_nocache() and
pci_mmap_page_range()")
The conversion done is expressed by the following Coccinelle
SmPL patch, it additionally required manual intervention to
address all the #ifdery and removal of redundant things which
arch_phys_wc_add() already addresses such as verbose message
about when MTRR fails and doing nothing when we didn't get
an MTRR.
@ mtrr_found @
expression index, base, size;
@@
-index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
+index = arch_phys_wc_add(base, size);
@ mtrr_rm depends on mtrr_found @
expression mtrr_found.index, mtrr_found.base, mtrr_found.size;
@@
-mtrr_del(index, base, size);
+arch_phys_wc_del(index);
@ mtrr_rm_zero_arg depends on mtrr_found @
expression mtrr_found.index;
@@
-mtrr_del(index, 0, 0);
+arch_phys_wc_del(index);
@ mtrr_rm_fb_info depends on mtrr_found @
struct fb_info *info;
expression mtrr_found.index;
@@
-mtrr_del(index, info->fix.smem_start, info->fix.smem_len);
+arch_phys_wc_del(index);
@ ioremap_replace_nocache depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@
-info->screen_base = ioremap_nocache(base, size);
+info->screen_base = ioremap_wc(base, size);
@ ioremap_replace_default depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@
-info->screen_base = ioremap(base, size);
+info->screen_base = ioremap_wc(base, size);
Generated-by: Coccinelle SmPL
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Brian Vandre <bvandre@gmail.com>
Cc: Thomas Gummerer <t.gummerer@gmail.com>
Cc: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Vitor Braga <vitorpybraga@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabian Frederick [Mon, 18 May 2015 17:34:15 +0000 (19:34 +0200)]
staging: xgifb: use swap() in XGI_WriteDAC()
Use kernel.h macro definition.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Cronin [Thu, 14 May 2015 05:35:03 +0000 (22:35 -0700)]
Staging: xgifb: vb_setmode: Fixed spelling error
Fixed spelling error in comment.
Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Cronin [Thu, 14 May 2015 01:05:42 +0000 (18:05 -0700)]
Drivers: staging: skein: skein_api: Fixed spelling errors
Fixed a few spelling errors in comments.
Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gujulan Elango, Hari Prasath (H.) [Fri, 29 May 2015 07:17:37 +0000 (07:17 +0000)]
staging: dgnc: delete all references to 'flipbuf'
This patch deletes all references to 'flipbuf'.Memory is allocated and
freed but never used anywhere in the driver.Also deleted an ununsed
Macro defined in the header file.
Signed-off-by: Gujulan Elango Hari Prasath <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wim de With [Wed, 20 May 2015 12:27:39 +0000 (14:27 +0200)]
staging: dgnc: fix line length over 80 chars in dgnc_sysfs.c
This patch fixes most of the lines over 80 characters long in
dgnc_sysfs.c. I couldn't find a way to break line 202-207 in a sensible
way. If there is a way, let me know.
Signed-off-by: Wim de With <nauxuron@wimdewith.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Buţiu Alexandru Octavian [Sun, 17 May 2015 19:31:34 +0000 (22:31 +0300)]
Staging: dgnc: fixed coding style issue in digi.h
Fixed coding style issue "warning line over 80 characters"
detected by checkpatch.pl in digi.h
Signed-off-by: Buţiu Alexandru Octavian <predator5047@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Needes [Mon, 25 May 2015 23:41:21 +0000 (16:41 -0700)]
staging: comedi/drivers/pcl.* coding style fixes
pcl812.c (resend of earlier patch)
Fixed lines exceeding 80 columns, correcting some spelling in process
Signed-off-by: Matthew Needes <mneedes@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Needes [Mon, 25 May 2015 23:41:20 +0000 (16:41 -0700)]
staging: comedi/drivers/pcl.* coding style fixes
pcl812.c / pcl816.c (resend of earlier patch)
Fixed indentation problems.
Signed-off-by: Matthew Needes <mneedes@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Mon, 25 May 2015 14:20:44 +0000 (14:20 +0000)]
staging: comedi: keep the consistency
Changed "register 0x%x" to "register=0x%x" to keep the consistency
of this file.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Mon, 25 May 2015 14:20:43 +0000 (14:20 +0000)]
staging: comedi: fix checkpatch error
Fixed an error found by checkpatch.pl.
ERROR: space required after that ',' (ctx:VxV)
./drivers/ni_mio_common.c:3764
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:45:25 +0000 (18:45 +0100)]
staging: comedi: comedi_isadma.h: make self-reliant
The Comedi "comedi_isadma.h" header is included by the source for the
"comedi_isadma" helper module and other modules that use it. It does
not compile cleanly when it is the first header file included. It uses
the `dma_addr_t` type, so include <linux/types.h> to declare it. (Also,
that indirectly takes care of the use of `NULL`.) It uses `struct
comedi_device *` in various function prototypes, so add an incomplete
declaration of `struct comedi_device`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:32:31 +0000 (18:32 +0100)]
staging: comedi: comedi_8254.h: make self-reliant
The Comedi "comedi_8254.h" header file is included by various Comedi
drivers with timer/counters based on the 8254 chip. The drivers do not
compile cleanly if this header file is included first. It uses pointers
to the `struct comedi_device`, `struct comedi_subdevice`, and `struct
comedi_insn` structures in various function prototypes, so declare those
as incomplete types. It use the `bool` type, so include
<linux/types.h>. It also uses the `__iomem` tag, but that seems to be
taken care of indirectly by including <linux/types.h>.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 16:32:03 +0000 (17:32 +0100)]
staging: comedi: addi_watchdog.h: don't include "../comedidev.h"
The Comedi "addi_watchdog.h" header doesn't use anything form
"comedidev.h" apart from `struct comedi_subdevice`, which it only uses
to construct a corresponding pointer type within the parameter list of a
function prototype. Just declare the structure type incompletely and
don't bother including the header file.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:16:01 +0000 (18:16 +0100)]
staging: comedi: amplc_dio200_pci.c: reformat copyright comment
Reformat the copyright comment at the top of the file to use the
preferred block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:16:00 +0000 (18:16 +0100)]
staging: comedi: amplc_dio200_common.c: fix up brace style
Use braces when the single statement following an `if` (or `else`)
spans more than one line (including any preceding comments).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:15:59 +0000 (18:15 +0100)]
staging: comedi: amplc_dio200_common.c: reformat copyright comment
Reformat the copyright comment at the top of the file to use the
preferred block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:15:58 +0000 (18:15 +0100)]
staging: comedi: amplc_dio200.c: reformat copyright comment
Reformat the copyright comment at the top of the file to use the
preferred block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:15:57 +0000 (18:15 +0100)]
staging: comedi: amplc_dio200.h: make self-reliant
The Comedi "amplc_dio200.h" header file included by drivers for Amplicon
DIO200 series cards does not compile cleanly when it is the first header
included by the ".c" file. It uses `struct comedi_device *` in the
parameter lists of some function prototypes, so just declare `struct
comedi_device` as an incomplete type. It also uses `bool`, so include
<linux/types.h> to declare it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:15:56 +0000 (18:15 +0100)]
staging: comedi: amplc_dio200.h: reformat copyright comment
Reformat the copyright comment at the top of the file to use the
preferred block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 15:21:38 +0000 (16:21 +0100)]
staging: comedi: comedi_8255: new module split from 8255
The Comedi "8255" module is both a standalone Comedi device driver
module for simple devices with one or more 8255 "Programmable Peripheral
Interface" chips at known I/O base addresses (configured at run-time),
and a helper module to configure a 8255-based digital I/O subdevice for
other Comedi drivers.
Split the "8255 subdevice helper" functionality into a new module:
"comedi_8255", leaving the standalone 8255 Comedi driver in the "8255"
module.
The Comedi "detach" routine of the standalone "8255" driver needs to
retrieve the I/O base address passed to the "comedi_8255" module to set
up each subdevice in order to release the I/O port regions it requested
in its "attach" routine. The "comedi_8255" module stores it in a
"subdevice private" data structure that is no longer known to the "8255"
module, so add a new, exported function `subdev_8255_regbase()` to
retrieve it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 15:21:37 +0000 (16:21 +0100)]
staging: comedi: 8255: document callback parameters better
Several Comedi driver modules call `subdev_8255_init()` or
`subdev_8255_mm_init()` to set up a digital I/O subdevice based on the
"8255" chip. One of the parameters to these functions is an optional
pointer to an I/O callback function to perform the actual register
accesses (an internal default callback function is used if NULL).
The kerneldoc for `subdev_8255_init()` and `subdev_8255_mm_init()`
describe the prototype of the optional I/O callback function
incorrectly (my fault), adding a non-existent parameter of type `struct
comedi_subdevice *`. Fix the kerneldoc. Also add parameter names to
the callback function pointer type wherever it occurs to make the usage
clearer.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 15:21:36 +0000 (16:21 +0100)]
staging: comedi: 8255.h: don't include "../comedidev.h"
The Comedi "8255.h" header doesn't use anything from "comedidev.h" apart
from `struct comedi_device` and `struct comedi_subdevice`, which are
only used to construct corresponding pointer types within the parameter
lists of function prototypes. Just declare those structure types
incompletely and don't bother including "comedidev.h".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 15:21:35 +0000 (16:21 +0100)]
staging: comedi: 8255: fix I/O region leak on failure
The Comedi "8255" driver does not clean up properly on failure. It can
leave requested I/O port regions unreleased. Specifically, the Comedi
"attach" handler (`dev_8255_attach()`) requests a specified I/O port
region before calling `subdev_8255_init()` to set up the subdevice. If
that fails, the "attach" handler returns an error and the Comedi core
will call the "detach" handler (`dev_8255_detach()`) to clean up. The
"detach" handler is responsible for releasing the I/O port regions
successfully requested by the "attach" handler. Unfortunately, it is
unable to obtain the base address of the region if the call to
`subdev_8255_init()` failed.
Fix the I/O region leak by releasing the region in the "attach" handler
directly if the call to `subdev_8255_init()` fails.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chaehyun lim [Fri, 15 May 2015 13:13:43 +0000 (22:13 +0900)]
staging: wlan-ng: fix checkpatch warnings
clean up checkpatch.pl in prism2sta.c
WARNING : line over 80 characters
Signed-off-by: chaehyun lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gujulan Elango, Hari Prasath (H.) [Wed, 13 May 2015 14:35:25 +0000 (14:35 +0000)]
staging: wlan-ng: check return value of kmalloc
check return value of kmalloc before accessing the memory pointer and
return -ENOMEM if allocation fails.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 19 May 2015 22:07:27 +0000 (00:07 +0200)]
staging: lustre: remove unused variable warning
A recent patch to simplify the lustre large memory allocation
causes new warnings as an unintended side-effect:
lustre/lov/lov_request.c: In function 'lov_finish_set':
lustre/lov/lov_request.c:78:7: warning: unused variable 'len' [-Wunused-variable]
int len = set->set_oabufs * sizeof(*set->set_pga);
^
lustre/obdclass/acl.c: In function 'lustre_ext_acl_xattr_reduce_space':
lustre/obdclass/acl.c:123:6: warning: unused variable 'old_size' [-Wunused-variable]
int old_size = CFS_ACL_XATTR_SIZE(old_count, ext_acl_xattr);
^
The reason is that the 'size' argument to OBD_FREE_LARGE()
is never needed, which was previously hidden by the extra
abstractions.
This avoids the warnings by adding a cast to void, to tell
the compiler that the argument is intentionally unused.
A better fix is probably to remove the entire set of allocation
macros and open-code the normal kernel interface calls.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 99d56ff7c1c ("staging/lustre: Always try kmalloc first for OBD_ALLOC_LARGE")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Shuey [Tue, 19 May 2015 14:14:39 +0000 (10:14 -0400)]
staging: lustre: lnet: remove LNET_MUTEX_LOCK macro
LNET_MUTEX_LOCK and LNET_MUTEX_UNLOCK are verbose wrappers to mutex_lock and
mutex_unlock. Get rid of these.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Shuey [Tue, 19 May 2015 14:14:38 +0000 (10:14 -0400)]
staging: lustre: lnet: selftest: code cleanup - variable spacing, indentation
Unify spacing in variable declarations, and align indentation in headers.
General whitespace cleanups.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Shuey [Tue, 19 May 2015 14:14:37 +0000 (10:14 -0400)]
staging: lustre: lnet: socklnd: code cleanup - align spacing
Unify variable declarations to use a single space. Also include several
miscellaneous whitespace cleanups, particularly in socklnd.h.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Shuey [Tue, 19 May 2015 14:14:36 +0000 (10:14 -0400)]
staging: lustre: lnet: o2iblnd: code cleanup - align whitespace
Unify variable declarations to use a single whitespace. Also line up
declarations and comments in o2iblnd.h.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Shuey [Tue, 19 May 2015 14:14:35 +0000 (10:14 -0400)]
staging: lustre: lnet: lnet: Module is LNet, not Portals
Fix the module version to match upstream development.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Shuey [Tue, 19 May 2015 14:14:34 +0000 (10:14 -0400)]
staging: lustre: lnet: dead code - remove LNetSetAsync
LNetSetAsync() returns 0, and is never called. Doesn't exist in the Intel
tree, either. Remove it.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Shuey [Tue, 19 May 2015 14:14:33 +0000 (10:14 -0400)]
staging: lustre: lnet: dead code - remove lnet_fini_locks
lnet_fini_locks() does nothing. Remove.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Shuey [Tue, 19 May 2015 14:14:32 +0000 (10:14 -0400)]
staging: lustre: lnet: lnet: code cleanups - variable declarations
Unify variable declarations to use a single space, and any other obvious
spacing flaws.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.0452 seconds and 5 git commands to generate.