Grant Likely [Wed, 6 Feb 2008 18:18:34 +0000 (05:18 +1100)]
[POWERPC] bootwrapper: Build multiple cuImages
Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image
with a fdt blob which means for any given configuration only one dts
file can be selected and so support for only one board can be built
This moves the selection of the default .dts file out of the kernel
config and into the bootwrapper makefile. The makefile chooses which
images to build based on the kernel config and the dts source file
name is taken directly from the image name. For example "cuImage.ebony"
will use "ebony.dts" as the device tree source file.
In addition, this patch allows a specific image to be requested from the
command line by adding "cuImage.%" and "treeImage.%" targets to the list
of valid built targets in arch/powerpc/Makefile. This allows the default
dts selection to be overridden.
Another advantage to this change is it allows a single defconfig to be
supplied for all boards using the same chip family and only differing in
the device tree.
Important note: This patch adds two new zImage targets; zImage.dtb.% and
zImage.dtb.initrd.% for zImages with embedded dtb files. Currently
there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc,
adder875-redboot and ep8248e. This patch *changes the zImage filenames*
for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'.
This new zImage.dtb targets were added so that the .dts file could be
part of the dependancies list for building them.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Balbir Singh [Fri, 1 Feb 2008 04:57:31 +0000 (15:57 +1100)]
[POWERPC] Fake NUMA emulation for PowerPC
Here's a dumb simple implementation of fake NUMA nodes for PowerPC.
Fake NUMA nodes can be specified using the following command line
option
numa=fake=<node range>
node range is of the format <range1>,<range2>,...<rangeN>
Each of the rangeX parameters is passed using memparse(). I find the
patch useful for fake NUMA emulation on my simple PowerPC machine.
I've tested it on a numa box with the following arguments
numa=fake=512M
numa=fake=512M,768M
numa=fake=256M,512M mem=512M
numa=fake=1G mem=768M
numa=fake=
without any numa= argument
The other side-effect introduced by this patch is that; in the case
where we don't have NUMA information, we now set a node online after
adding each LMB. This node could very well be node 0, but in the case
that we enable fake NUMA nodes, when we cross node boundaries, we need
to set the new node online.
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Olof Johansson [Thu, 31 Jan 2008 03:34:47 +0000 (14:34 +1100)]
[POWERPC] Fix compilation for CONFIG_DEBUGGER=n and CONFIG_KEXEC=y
Looks like "[POWERPC] kdump shutdown hook support" broke builds when
CONFIG_DEBUGGER=n and CONFIG_KEXEC=y, such as in g5_defconfig:
arch/powerpc/kernel/crash.c: In function 'default_machine_crash_shutdown':
arch/powerpc/kernel/crash.c:388: error: '__debugger_fault_handler' undeclared (first use in this function)
arch/powerpc/kernel/crash.c:388: error: (Each undeclared identifier is reported only once
arch/powerpc/kernel/crash.c:388: error: for each function it appears in.)
Move the debugger hooks to under CONFIG_DEBUGGER || CONFIG_KEXEC, since
that's when the crash code is enabled.
(I should have caught this with my build-script pre-merge, my bad. :( )
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Thu, 7 Feb 2008 00:21:09 +0000 (11:21 +1100)]
Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xx into for-2.6.25
John Rigby [Mon, 28 Jan 2008 17:28:56 +0000 (04:28 +1100)]
[POWERPC] mpc512x: Add MPC512x PSC support to MPC52xx psc driver
Add 512x support using the psc_ops framework established
with the previous patch.
All 512x PSCs share the same interrupt so add
IRQF_SHARED to irq flags.
Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
John Rigby [Mon, 28 Jan 2008 17:28:55 +0000 (04:28 +1100)]
[POWERPC] mpc512x: Factor out 5200 dependencies from 52xx psc driver
PSC devices are different between the mpc5200 and the mpc5121
this patch localizes the differences in preparation for adding mpc5121
support to the psc uart driver.
Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
John Rigby [Mon, 28 Jan 2008 17:28:54 +0000 (04:28 +1100)]
[POWERPC] mpc512x: Device tree for MPC5121 ADS
Minimal /dts-v1/ device tree for mpc5121 ads.
port-number property in uart nodes
will go away after the driver learns to use aliases
Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
John Rigby [Mon, 28 Jan 2008 17:28:53 +0000 (04:28 +1100)]
[POWERPC] mpc512x: Basic platform support
512x is very similar to 83xx and most
of this is patterned after code from 83xx.
New platform:
changed:
arch/powerpc/Kconfig
arch/powerpc/platforms/Kconfig
arch/powerpc/platforms/Kconfig.cputype
arch/powerpc/platforms/Makefile
new:
arch/powerpc/platforms/512x/*
include/asm-powerpc/mpc512x.h
Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Paul Mackerras [Wed, 6 Feb 2008 11:08:37 +0000 (22:08 +1100)]
Merge branch 'for-2.6.25' of /linux/kernel/git/galak/powerpc into for-2.6.25
Julia Lawall [Tue, 5 Feb 2008 07:35:00 +0000 (23:35 -0800)]
[POWERPC] arch/powerpc/platforms/82xx: Add missing of_node_put
Of_get_parent and of_find_compatible_node do a of_node_get, and thus a
corresponding of_code_put is needed in both the error case and the normal
return case.
The problem was found using the following semantic match.
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T,T1,T2;
identifier E;
statement S;
expression x1,x2,x3;
int ret;
@@
T E;
...
* E = \(of_get_parent\|of_find_compatible_node\)(...);
if (E == NULL) S
... when != of_node_put(...,(T1)E,...)
when != if (E != NULL) { ... of_node_put(...,(T1)E,...); ...}
when != x1 = (T1)E
when != E = x3;
when any
if (...) {
... when != of_node_put(...,(T2)E,...)
when != if (E != NULL) { ... of_node_put(...,(T2)E,...); ...}
when != x2 = (T2)E
(
* return;
|
* return ret;
)
}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Julia Lawall [Tue, 5 Feb 2008 07:34:59 +0000 (23:34 -0800)]
[POWERPC] arch/powerpc/sysdev: Add missing of_node_put
The functions of_find_compatible_node and of_find_node_by_type both
call of_node_get on their result. So any error handling code
thereafter should call of_node_put(np). This is taken care of in the
case where there is a goto out, but not when there is a direct return.
The function irq_alloc_host puts np into the returned structure, which is
stored in the global variable mpc8xx_pic_host, so the reference count
should be set for the lifetime of that variable. The current solution ups
the reference count again in the argument to irq_alloc_host so that it can
be decremented on the way out. This seems a bit unnecessary, and also
doesn't work in the case where irq_alloc_host fails, because then the
reference count only goes does by one, whereas it should go down by two. A
better solution is to not increment the reference count in the argument to
irq_alloc_host and only decrement it on the way out in an error case.
The problem was found using the following semantic match.
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T,T1,T2;
identifier E;
statement S;
expression x1,x2,x3;
int ret;
@@
T E;
...
* E = \(of_get_parent\|of_find_compatible_node\)(...);
if (E == NULL) S
... when != of_node_put(...,(T1)E,...)
when != if (E != NULL) { ... of_node_put(...,(T1)E,...); ...}
when != x1 = (T1)E
when != E = x3;
when any
if (...) {
... when != of_node_put(...,(T2)E,...)
when != if (E != NULL) { ... of_node_put(...,(T2)E,...); ...}
when != x2 = (T2)E
(
* return;
|
* return ret;
)
}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Julia Lawall [Tue, 5 Feb 2008 07:34:58 +0000 (23:34 -0800)]
[POWERPC] arch/powerpc/platforms/pseries: Add missing of_node_put
Of_get_parent and of_find_compatible_node do an of_node_get, and thus a
corresponding of_code_put is needed in the error case.
The problem was found using the following semantic match.
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T,T1,T2;
identifier E;
statement S;
expression x1,x2,x3;
int ret;
@@
T E;
...
* E = \(of_get_parent\|of_find_compatible_node\)(...);
if (E == NULL) S
... when != of_node_put(...,(T1)E,...)
when != if (E != NULL) { ... of_node_put(...,(T1)E,...); ...}
when != x1 = (T1)E
when != E = x3;
when any
if (...) {
... when != of_node_put(...,(T2)E,...)
when != if (E != NULL) { ... of_node_put(...,(T2)E,...); ...}
when != x2 = (T2)E
(
* return;
|
* return ret;
)
}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Kumar Gala [Wed, 6 Feb 2008 05:58:30 +0000 (23:58 -0600)]
[POWERPC] 85xx: Add second cpu to 8572 dts
The 8572 is a dual core processor, not reason not to describe both
cores in the device tree.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Anton Vorontsov [Mon, 4 Feb 2008 13:46:17 +0000 (16:46 +0300)]
[POWERPC] qe_lib: fix few fluffy negligences
One is intoduced by me (of_node_put() absence) and another was
present already (not checking for NULL).
Found by Stephen Rothwell.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kim Phillips [Sat, 2 Feb 2008 00:10:03 +0000 (18:10 -0600)]
[POWERPC] 83xx: Update mpc83xx_defconfig
Enable math emulation and ucc_geth and some PHYs mpc83xx boards use.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kim Phillips [Sat, 2 Feb 2008 00:09:58 +0000 (18:09 -0600)]
[POWERPC] FSL: fix mpc83xx_spi device registration
calling platform_device_register after platform_device_alloc causes
this:
kobject (
c3841a70): tried to init an initialized object, something is seriously wrong.
Call Trace:
[
c381fe20] [
c0007bb8] show_stack+0x3c/0x194 (unreliable)
[
c381fe50] [
c01322a8] kobject_init+0xb8/0xbc
[
c381fe60] [
c01591cc] device_initialize+0x30/0x9c
[
c381fe80] [
c015ee34] platform_device_register+0x1c/0x34
[
c381fea0] [
c02f1fe0] of_fsl_spi_probe+0x21c/0x22c
[
c381ff30] [
c02f2044] fsl_spi_init+0x54/0x160
[
c381ff60] [
c02f3924] __machine_initcall_mpc832x_rdb_mpc832x_spi_init+0x120/0x138
[
c381ff70] [
c02e61b4] kernel_init+0x98/0x284
[
c381fff0] [
c000f740] kernel_thread+0x44/0x60
fixed by calling platform_device_add (second half of
platform_device_register) instead.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kim Phillips [Sat, 2 Feb 2008 00:09:54 +0000 (18:09 -0600)]
[POWERPC] 83xx: mpc832x_rdb: fix compiler warning
arch/powerpc/platforms/83xx/mpc832x_rdb.c: In function ‘mpc832x_rdb_setup_arch’:
arch/powerpc/platforms/83xx/mpc832x_rdb.c:104: warning: ‘np’ is used uninitialized in this function
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Andy Fleming [Tue, 5 Feb 2008 00:28:07 +0000 (18:28 -0600)]
[POWERPC} Add oprofile support for e300
The e300 c3 and c4 variants support hardware performance monitor counters
which are identical to those found in the e500.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Andy Fleming [Tue, 5 Feb 2008 00:27:55 +0000 (18:27 -0600)]
[POWERPC] Made FSL Book-E PMC support more generic
Some of the more recent e300 cores have the same performance monitor
implementation as the e500. e300 isn't book-e, so the name isn't
really appropriate. In preparation for e300 support, rename a bunch
of fsl_booke things to say fsl_emb (Freescale Embedded Performance Monitors).
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Jon Loeliger [Sat, 2 Feb 2008 19:02:51 +0000 (13:02 -0600)]
[POWERPC] Fix storcenter DTS typos, feedback, IRQs.
Cleaned up IRQ layout and removed unsused ISU allocations.
Fixed RTC address typo from /dts-v1/ conversion.
Incorporated list suggestions to use an "iomega," vendor prefix,
and to use a node reference rather than a hard path.
Signed-off-by: Jon Loeliger <jdl@@jdl.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Bryan O'Donoghue [Sun, 3 Feb 2008 23:21:29 +0000 (23:21 +0000)]
[POWERPC] 8xx: Add clock-frequency to adder875 and mpc885ads dts
cpm_uart_core has a dependency on fsl,cpm-brg/clock-frequency, this
means that a .dts that uses the cpm uart driver needs to supply a
clock-frequency entry for get_brgfreq to return a meaningful number.
Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kim Phillips [Fri, 1 Feb 2008 01:40:05 +0000 (19:40 -0600)]
[POWERPC] 83xx: Add rtc node to mpc8313erdb dts
The 8313 rdb has a ds1339 at address 0x68.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Scott Wood [Tue, 5 Feb 2008 19:43:26 +0000 (06:43 +1100)]
[POWERPC] update_mmu_cache: Don't cache-flush non-readable pages
Currently, update_mmu_cache will crash if given a no-access PTE.
There's no need to synchronize dcache/icache unless it's an exec
mapping -- however, due to the existence of older glibc versions that
execute out of a read-but-no-exec page, readability is tested instead.
This assumes no exec-only mappings; if such mappings become supported,
they will need to go through the kmap_atomic() version of
dcache/icache synchronization.
This fixes a bug reported by some users where the kernel would crash
while dumping core on a threaded program.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Tue, 5 Feb 2008 12:01:50 +0000 (23:01 +1100)]
[POWERPC] Fix legacy serial search for opb bus ports
The patch to legacy_serial.c (
1a7507c7da2df6856e085e0fbb0c9ea8c12ac4e,
Reduce code duplication in legacy_serial, add UART parent types) changed
the semantics for opb ports from type = "opb" || compatible = "ibm,opb"
to type = "opb" && compatible = "ibm,opb".
The result is serial ports on our QS21s (Cell blades) don't get found,
and for some reason the machine doesn't boot at all - possibly it's
panicking due to lack of a console?
The fix is to add two entries to the of_device_id table, one that looks
for type = "opb" and the other compatible = "ibm,opb".
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Tony Breeds [Tue, 5 Feb 2008 05:16:48 +0000 (16:16 +1100)]
[POWERPC] Use a sensible default for clock_getres() in the VDSO
This ensures that the syscall and the (fast) vdso versions of
clock_getres() will return the same resolution.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Stephen Rothwell [Tue, 5 Feb 2008 03:17:31 +0000 (14:17 +1100)]
[POWERPC] iSeries: Fix section mismatch in viocd
WARNING: drivers/cdrom/viocd.o(.text+0x504): Section mismatch in reference from the function .viocd_probe() to the function .init.text:.find_capability()
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Stephen Rothwell [Tue, 5 Feb 2008 03:15:12 +0000 (14:15 +1100)]
[POWERPC] iSeries: Fix section mismatch in viodsasd
WARNING: vmlinux.o(.text+0x3017c): Section mismatch in reference from the function .vio_create_viodasd() to the function .devinit.text:.vio_register_device_node()
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Stephen Rothwell [Tue, 5 Feb 2008 02:13:15 +0000 (13:13 +1100)]
[POWERPC] Avoid possible extra of_node_put in axon_msi.c
I got this warning from gcc:
arch/powerpc/platforms/cell/axon_msi.c:118: warning: 'tmp' may be used uninitialized in this function
Which turns out to be a false positive, but pointed out that it was
possible for the error path in find_msi_translator() to do an extra
of_node_put on a node. This fixes it by localising the ref counting
a bit. As a side effect, the warning goes away.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Fri, 25 Jan 2008 05:59:14 +0000 (16:59 +1100)]
[POWERPC] Avoid DMA exception when using axon_msi with IOMMU
There's a brown-paper-bag bug in axon_msi, we pass the address of our
FIFO directly to the hardware, without DMA mapping it. This leads to
DMA exceptions if you enable MSI & the IOMMU.
The fix is to correctly DMA map the fifo, dma_alloc_coherent() does
what we want - and we need to track the virt & phys addresses.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Fri, 25 Jan 2008 05:59:14 +0000 (16:59 +1100)]
[POWERPC] Convert axon_msi to an of_platform driver
Now that we create of_platform devices earlier on cell, we can make the
axon_msi driver an of_platform driver. This makes the code cleaner in
several ways, and most importantly means we have a struct device.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Fri, 25 Jan 2008 05:59:13 +0000 (16:59 +1100)]
[POWERPC] Create and hook up of_platform_device_shutdown
Although of_platform_device's can have a shutdown routine, at the moment
the bus code doesn't actually call it. So add the required glue to
hook the shutdown routine.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Fri, 25 Jan 2008 05:59:12 +0000 (16:59 +1100)]
[POWERPC] Search for and publish cell OF platform devices earlier
Currently cell publishes OF devices at device_initcall() time, which
means the earliest a driver can bind to a device is also device_initcall()
time. We have a driver we want to register before other devices, so
publish the devices at subsys_initcall() time.
This should not cause any behaviour change for existing drivers, as they
are still bound at device_initcall() time.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Fri, 26 Oct 2007 06:54:31 +0000 (16:54 +1000)]
[POWERPC] Add of_get_next_parent()
Iterating through a device node's parents is simple enough, but dealing
with the refcounts properly is a little ugly, and replicating that logic
is asking for someone to get it wrong or forget it all together, eg:
while (dn != NULL) {
/* loop body */
tmp = of_get_parent(dn);
of_node_put(dn);
dn = tmp;
}
So add of_get_next_parent(), inspired by of_get_next_child(). The
contract is that it returns the parent and drops the reference on the
current node, this makes the loop look like:
while (dn != NULL) {
/* loop body */
dn = of_get_next_parent(dn);
}
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Scott Wood [Thu, 31 Jan 2008 17:36:56 +0000 (11:36 -0600)]
[POWERPC] 8xx: adder875, ep88xc: fix to match recent 8xx cleanups.
asm/commproc.h was renamed to asm/cpm1.h
sysdev/commproc.h was renamed to platforms/8xx/mpc8xx.h
m8xx_pic_init was renamed to mpc8xx_pics_init
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kim Phillips [Thu, 31 Jan 2008 18:56:58 +0000 (12:56 -0600)]
[POWERPC] 83xx: Correct 2nd PCI controller interrupt value in mpc834x_mds dts
According to the 8349EA ref man, the second PCI PHB IRQ is 67. Thanks to Peter
Van Ackeren for finding this.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Andre Detsch [Fri, 11 Jan 2008 04:03:26 +0000 (15:03 +1100)]
[POWERPC] spufs: Fix memory leak on SPU affinity
Reference count for the "neighbor" spu context was not
being correctly decremented after usage.
So, contexts used as reference during SPU affinity setup
were not being deallocated, leading to a memory leak.
Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Jeremy Kerr [Fri, 11 Jan 2008 04:03:26 +0000 (15:03 +1100)]
[POWERPC] spufs: Fix SPE single-step mode
Currently we only catch debug events through the 0x3fff status;
spufs_run_spu doesn't handle single-step SPE events.
This change adds a handler for conditions where the SPE is stopped due
to single-step-mode.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Christoph Hellwig [Fri, 11 Jan 2008 04:03:26 +0000 (15:03 +1100)]
[POWERPC] spufs: Add marker-based tracing facility
This adds markers two important points in the spufs code and a new
module (sputrace.ko) that allows reading these out through a proc file.
Long-term I'd rather see something like lttng extended to use the spufs
instrumentation, but for now I think this is a good enough quick
solution. We'll probably want to add various addition event in addition
to that ones I have already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Kim Phillips [Wed, 30 Jan 2008 18:46:19 +0000 (12:46 -0600)]
[POWERPC] 83xx: configure USB clock for MPC8315E
SCCR USB bits are in a different location on the mpc8315.
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Anton Vorontsov [Mon, 21 Jan 2008 20:49:53 +0000 (23:49 +0300)]
cpmac: convert to new Fixed PHY infrastructure
This patch converts cpmac to the new Fixed PHY infrastructure, though it
doesn't fix all the problems with that driver. I didn't even bother to
test this patch to compile, because cpmac driver is broken in several ways:
1. This driver won't compile by itself because lack of its header describing
platform data;
2. It assumes that fixed PHYs should be created by the ethernet driver.
It is wrong assumption: fixed PHYs creation is platform code authority,
driver must blindly accept bus_id and phy_id platform data variables
instead.
Also, it seem that that driver doesn't have actual in-tree users, so
nothing to fix further.
The main purpose of that patch is to get rid of the following Kconfig
warning:
scripts/kconfig/conf -s arch/powerpc/Kconfig
drivers/net/Kconfig:1713:warning: 'select' used by config symbol
'CPMAC' refers to undefined symbol 'FIXED_MII_100_FDX'
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Linus Torvalds [Wed, 6 Feb 2008 03:06:25 +0000 (19:06 -0800)]
Merge git://git./linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits)
ide-tape: bump minor driver version
ide-tape: cleanup the remaining codestyle issues
ide-tape: fix syntax error in idetape_identify_device()
ide-tape: remove leftover OnStream support warning
ide-tape: collect module-related macro calls at the end
ide-tape: include proper headers
ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd()
ide-tape: remove struct idetape_id_gcw
ide-tape: cleanup and fix comments
ide-tape: shorten some function names
ide-tape: remove idetape_increase_max_pipeline_stages()
ide-tape: struct idetape_tape_t: shorten member names v2
ide-tape: struct idetape_tape_t: remove unused members
ide-tape: remove typedef idetape_chrdev_direction_t
ide-tape: simplify code branching in the interrupt handler
ide-tape: remove unreachable code chunk
ide-tape: remove struct idetape_read_position_result_t
ide-tape: refactor the debug logging facility
ide: add ide_read_error() inline helper
ide: add ide_read_[alt]status() inline helpers
...
Linus Torvalds [Wed, 6 Feb 2008 03:05:48 +0000 (19:05 -0800)]
Merge branch 'dmapool' of git://git./linux/kernel/git/willy/misc
* 'dmapool' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc:
pool: Improve memory usage for devices which can't cross boundaries
Change dmapool free block management
dmapool: Tidy up includes and add comments
dmapool: Validate parameters to dma_pool_create
Avoid taking waitqueue lock in dmapool
dmapool: Fix style problems
Move dmapool.c to mm/ directory
Borislav Petkov [Wed, 6 Feb 2008 01:57:55 +0000 (02:57 +0100)]
ide-tape: bump minor driver version
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:54 +0000 (02:57 +0100)]
ide-tape: cleanup the remaining codestyle issues
... thus decreasing checkpatch.pl errors to 0.
Bart:
- remove needless function prototypes while at it
- remove needless parentheses while at it
- add missing KERN_ level to ide_tape_probe()
- other minor fixups
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:54 +0000 (02:57 +0100)]
ide-tape: fix syntax error in idetape_identify_device()
Spotted by Sergei Shtylyov.
CC: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:54 +0000 (02:57 +0100)]
ide-tape: remove leftover OnStream support warning
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:54 +0000 (02:57 +0100)]
ide-tape: collect module-related macro calls at the end
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:54 +0000 (02:57 +0100)]
ide-tape: include proper headers
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:54 +0000 (02:57 +0100)]
ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd()
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:53 +0000 (02:57 +0100)]
ide-tape: remove struct idetape_id_gcw
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:53 +0000 (02:57 +0100)]
ide-tape: cleanup and fix comments
Also, remove redundant ones and cleanup whitespace.
Bart:
- minor fixups
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:53 +0000 (02:57 +0100)]
ide-tape: shorten some function names
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)]
ide-tape: remove idetape_increase_max_pipeline_stages()
This function was being used only at one place so fold it in there.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)]
ide-tape: struct idetape_tape_t: shorten member names v2
Shorten some member names not too aggressively since this driver might be gone
anyway soon.
Bart:
- minor fixes
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)]
ide-tape: struct idetape_tape_t: remove unused members
- last_frame_position: only being written to once
- firmware_revision, product_id, vendor_id: used once, remove from struct
idetape_tape_t and deal with them locally
- firmware_revision_num: only written to once
- tape_still_time_begin: completely unused
- tape_still_time: never written to; remove corresponding code chunk
- uncontrolled_last_pipeline_head: only once written to
- blocks_in_buffer: only written to
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)]
ide-tape: remove typedef idetape_chrdev_direction_t
.. and replace it with plain enums.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)]
ide-tape: simplify code branching in the interrupt handler
... by adding a new typedef function pointer idetape_io_buf in order to call
the proper buffer i/o handler depending on the data direction.
Bart:
- move idetape_io_buf before idetape_pc_intr() comment
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)]
ide-tape: remove unreachable code chunk
tape->speed_control is set to 1 in idetape_setup(), but, in calculate_speeds()
its value is tested for being 0, 1, or 2. Remove the if-branches where
tape->speed_control != 1 since they are never executed. Also, rename
calculate_speeds() by adding driver's prefix as is with the other function
names.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:51 +0000 (02:57 +0100)]
ide-tape: remove struct idetape_read_position_result_t
There should be no functional changes resulting from this patch.
Bart:
- remove needless "!!"
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Wed, 6 Feb 2008 01:57:51 +0000 (02:57 +0100)]
ide-tape: refactor the debug logging facility
Teach the debug logging macro to differentiate between log levels based on the
type of debug level enabled specifically instead of a threshold-based one.
Thus, convert tape->debug_level to a bitmask that is written to over /proc.
Also,
- cleanup and simplify the debug macro thus removing a lot of code lines,
- get rid of unused debug levels,
- adjust the loglevel at several places where it was simply missing (e.g.
idetape_chrdev_open())
- move the tape ptr initialization up in idetape_chrdev_open() so that we can
use it in the debug_log macro earlier in the function.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 6 Feb 2008 01:57:51 +0000 (02:57 +0100)]
ide: add ide_read_error() inline helper
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 6 Feb 2008 01:57:51 +0000 (02:57 +0100)]
ide: add ide_read_[alt]status() inline helpers
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 6 Feb 2008 01:57:50 +0000 (02:57 +0100)]
ide: remove ide_setup_ports()
ide-cris.c:
* Add cris_setup_ports() helper and use it instead of ide_setup_ports()
(fixes random value being set in ->io_ports[IDE_IRQ_OFFSET]).
buddha.c:
* Add buddha_setup_ports() helper and use it instead of ide_setup_ports().
falconide.c:
* Add falconide_setup_ports() helper and use it instead of ide_setup_ports(),
also fix return value of falconide_init() while at it.
gayle.c:
* Add gayle_setup_ports() helper and use it instead of ide_setup_ports().
macide.c:
* Add macide_setup_ports() helper and use it instead of ide_setup_ports()
(fixes incorrect value being set in ->io_ports[IDE_IRQ_OFFSET]).
q40ide.c:
* Fix q40_ide_setup_ports() comments.
ide.c:
* Remove no longer needed ide_setup_ports().
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 6 Feb 2008 01:57:50 +0000 (02:57 +0100)]
ide: remove redundant BUG_ON() from [atapi_]reset_pollfunc()
Same BUG_ON() is present inside ide_set_handler().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 6 Feb 2008 01:57:50 +0000 (02:57 +0100)]
ide: remove write-only ->sata_misc[] from ide_hwif_t
* Remove write-only ->sata_misc[] from ide_hwif_t.
* Remove no longer used SATA_{MISC,PHY,IEN}_OFFSET defines.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 6 Feb 2008 01:57:50 +0000 (02:57 +0100)]
ppc: fix #ifdef-s in mediabay driver (take 2)
* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef in
check_media_bay() by CONFIG_MAC_FLOPPY one.
* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef-s by
CONFIG_BLK_DEV_IDE_PMAC ones.
* check_media_bay() is used only by drivers/block/swim3.c
so make this function available only if CONFIG_MAC_FLOPPY
is defined.
* check_media_bay_by_base() and media_bay_set_ide_infos()
are used only by drivers/ide/ppc/pmac.c so so make these
functions available only if CONFIG_MAC_FLOPPY is defined.
v2:
* Remove ifdefs from function prototypes. (Andrew Morton)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Denis Cheng [Wed, 6 Feb 2008 01:57:49 +0000 (02:57 +0100)]
ide-pci-generic: kill the unused ifdef/endif/MODULE code
with module_param macro, the __setup code can be killed now:
const __setup("all-generic-ide", ide_generic_all_on);
and the module name "generic.ko" is not descriptive to its functionality,
can be changed in Makefile, the "ide-pci-generic.ko" is better.
the ide-pci-generic.all-generic-ide parameter also documented
in Documentation/kernel-parameters.txt
Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Andrew Morton [Wed, 6 Feb 2008 01:57:49 +0000 (02:57 +0100)]
drivers/ide/legacy/hd.c: fix uninitialized var warning
drivers/ide/legacy/hd.c: In function 'hd_request':
drivers/ide/legacy/hd.c:424: warning: 'stat' may be used uninitialized in this function
gcc is being stupid.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Andrew Morton [Wed, 6 Feb 2008 01:57:49 +0000 (02:57 +0100)]
drivers/ide/ide-acpi.c: fix uninitialized var warning
drivers/ide/ide-acpi.c: In function 'ide_acpi_init':
drivers/ide/ide-acpi.c:175: warning: 'dev_handle' may be used uninitialized in this function
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Anton Salnikov [Wed, 6 Feb 2008 01:57:48 +0000 (02:57 +0100)]
Palmchip BK3710 IDE driver
This is Palmchip BK3710 IDE controller support.
The IDE controller logic supports PIO, MultiWord-DMA and Ultra-DMA modes.
Supports interface to Compact Flash (CF) configured in True-IDE mode.
Bart:
- remove dead code
- fix ide_hwif_setup_dma() build problem
Signed-off-by: Anton Salnikov <asalnikov@ru.mvista.com>
Reviewed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Wed, 6 Feb 2008 01:57:48 +0000 (02:57 +0100)]
ide-generic: probing bugfix
On Tuesday 05 February 2008, Linus Torvalds wrote:
>
> On Sat, 2 Feb 2008, Bartlomiej Zolnierkiewicz wrote:
> >
> > * next part of IDE probing code re-organization saga
> > (that would be me)
>
> This seems to cause very irritating and bogus messages for me:
>
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> ide2: I/O resource 0x0-0x7 not free.
> ide2: ports already in use, skipping probe
> ide3: I/O resource 0x0-0x7 not free.
> ide3: ports already in use, skipping probe
> ide4: I/O resource 0x0-0x7 not free.
> ide4: ports already in use, skipping probe
> ide5: I/O resource 0x0-0x7 not free.
> ide5: ports already in use, skipping probe
> ide6: I/O resource 0x0-0x7 not free.
> ide6: ports already in use, skipping probe
> ide7: I/O resource 0x0-0x7 not free.
> ide7: ports already in use, skipping probe
> ide8: I/O resource 0x0-0x7 not free.
> ide8: ports already in use, skipping probe
> ide9: I/O resource 0x0-0x7 not free.
> ide9: ports already in use, skipping probe
>
> and that's just totally bogus. It shouldn't even request that region,
> since it's not been allocated!
The commit
139ddfcab50e5eabcc88341c8743a990ac1be6a2 ("ide: move handling of
I/O resources out of ide_probe_port()") changed the ordering of hwif->noprobe
check vs ide_hwif_request_regions() call (so that we now reserve I/O regions
before checking for hwif->noprobe). However ide-generic host driver depended
on hwif->noprobe to be set for skipping probing of empty ide_hwifs[] slots.
Fix it by passing only indexes of non-empty slots to ide_device_add_all()
from ide_generic_init().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Andrew Morton [Tue, 5 Feb 2008 22:22:58 +0000 (14:22 -0800)]
deprecate smbfs in favour of cifs
smbfs is a bit buggy and has no maintainer. Change it to shout at the user on
the first five mount attempts - tell them to switch to CIFS.
Come December we'll mark it BROKEN and see what happens.
[olecom@flower.upol.cz: documentation update]
Cc: Urban Widmark <urban@teststation.com>
Acked-by: Steven French <sfrench@us.ibm.com>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Tue, 5 Feb 2008 22:22:56 +0000 (14:22 -0800)]
timerfd: fix remaining architectures
Cc: David Howells <dhowells@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Haavard Skinnemoen [Tue, 5 Feb 2008 22:22:55 +0000 (14:22 -0800)]
Fix timerfd breakage on avr32
Hmm. Someone removed the timerfd() syscall...
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Tue, 5 Feb 2008 22:26:01 +0000 (22:26 +0000)]
stop c_p_a corrupting the pds
When change_page_attr splits a large page on x86_32 (without PAE), it is
currently corrupting every process's page directory: fix that by removing
the thinko which passes down a physical instead of a virtual address.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 5 Feb 2008 18:24:52 +0000 (10:24 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] make pfm_get_task work with virtual pids
[IA64] honor notify_die() returning NOTIFY_STOP
[IA64] remove dead code: __cpu_{down,die} from !HOTPLUG_CPU
[IA64] Appoint kvm/ia64 Maintainers
[IA64] ia64_set_psr should use srlz.i
[IA64] Export three symbols for module use
[IA64] mca style cleanup
[IA64] sn_hwperf semaphore to mutex
[IA64] generalize attribute of fsyscall_gtod_data
[IA64] efi.c Add /* never reached */ annotation
[IA64] efi.c Spelling/punctuation fixes
[IA64] Make efi.c mostly fit in 80 columns
[IA64] aliasing-test: fix gcc warnings on non-ia64
[IA64] Slim-down __clear_bit_unlock
[IA64] Fix the order of atomic operations in restore_previous_kprobes on ia64
[IA64] constify function pointer tables
[IA64] fix userspace compile error in gcc_intrin.h
Linus Torvalds [Tue, 5 Feb 2008 18:11:02 +0000 (10:11 -0800)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] dcss: Initialize workqueue before using it.
[S390] Remove BUILD_BUG_ON() in vmem code.
[S390] sclp_tty/sclp_vt220: Fix scheduling while atomic
[S390] dasd: fix panic caused by alias device offline
[S390] dasd: add ifcc handling
[S390] latencytop s390 support.
[S390] Implement ext2_find_next_bit.
[S390] Cleanup & optimize bitops.
[S390] Define GENERIC_LOCKBREAK.
[S390] console: allow vt220 console to be the only console
[S390] Fix couple of section mismatches.
[S390] Fix smp_call_function_mask semantics.
[S390] Fix linker script.
[S390] DEBUG_PAGEALLOC support for s390.
[S390] cio: Add shutdown callback for ccwgroup.
[S390] cio: Update documentation.
[S390] cio: Clean up chsc response code handling.
[S390] cio: make sense id procedure work with partial hardware response
Linus Torvalds [Tue, 5 Feb 2008 18:09:07 +0000 (10:09 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
[PKT_SCHED]: vlan tag match
[NET]: Add if_addrlabel.h to sanitized headers.
[NET] rtnetlink.c: remove no longer used functions
[ICMP]: Restore pskb_pull calls in receive function
[INET]: Fix accidentally broken inet(6)_hash_connect's port offset calculations.
[NET]: Remove further references to net-modules.txt
bluetooth rfcomm tty: destroy before tty_close()
bluetooth: blacklist another Broadcom BCM2035 device
drivers/bluetooth/btsdio.c: fix double-free
drivers/bluetooth/bpa10x.c: fix memleak
bluetooth: uninlining
bluetooth: hidp_process_hid_control remove unnecessary parameter dealing
tun: impossible to deassert IFF_ONE_QUEUE or IFF_NO_PI
hamradio: fix dmascc section mismatch
[SCTP]: Fix kernel panic while received AUTH chunk with BAD shared key identifier
[SCTP]: Fix kernel panic while received AUTH chunk while enabled auth
[IPV4]: Formatting fix for /proc/net/fib_trie.
[IPV6]: Fix sysctl compilation error.
[NET_SCHED]: Add #ifdef CONFIG_NET_EMATCH in net/sched/cls_flow.c (latest git broken build)
[IPV4]: Fix compile error building without CONFIG_FS_PROC
...
Linus Torvalds [Tue, 5 Feb 2008 18:08:47 +0000 (10:08 -0800)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64] pci_sun4v.c: Section fixes.
Linus Torvalds [Tue, 5 Feb 2008 17:54:10 +0000 (09:54 -0800)]
Merge branch 'agp-patches' of git://git./linux/kernel/git/airlied/agp-2.6
* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
agp: remove flush_agp_mappings calls from new flush handling code
intel-agp: introduce IS_I915 and do some cleanups..
[intel_agp] fix name for G35 chipset
intel-agp: fixup resource handling in flush code.
intel-agp: add new chipset ID
agp: remove unnecessary pci_dev_put
agp: remove uid comparison as security check
fix AGP warning
agp/intel: Add chipset flushing support for i8xx chipsets.
intel-agp: add chipset flushing support
agp: add chipset flushing support to AGP interface
Linus Torvalds [Tue, 5 Feb 2008 17:52:46 +0000 (09:52 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/nes: Add a driver for NetEffect RNICs
IB/mthca: Return proper error codes from mthca_fmr_alloc()
IB: Avoid marking __devinitdata as const
IB/mlx4: Actually print out the driver version
IB/ib_mthca: Pre-link receive WQEs in Tavor mode
IB/mthca: Remove checks for srq->first_free < 0
IB/fmr_pool: Allocate page list for pool FMRs only when caching enabled
IB/srp: Retry stale connections
mlx4_core: Don't read reserved fields in mlx4_QUERY_ADAPTER()
IB/mthca: Don't read reserved fields in mthca_QUERY_ADAPTER()
IPoIB: Remove a misleading debug print
IPoIB: Handle bonding failover race for connected neighbours too
IB/mthca: Fix and simplify page size calculation in mthca_reg_phys_mr()
IB/ehca: Add PMA support
IB/ehca: Update sma_attr also in case of disruptive config change
IB/ehca: Prevent sending UD packets to QP0
IB/cm: Add interim support for routed paths
mlx4_core: Fix more section mismatches
Jeff Dike [Tue, 5 Feb 2008 06:31:29 +0000 (22:31 -0800)]
uml: make mconsole_stack namespace-aware
Also fixed the include syntax while I was there.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:29 +0000 (22:31 -0800)]
uml: redo the calculation of NR_syscalls
Redo the calculation of NR_syscalls since that disappeared from i386 and
use a similar mechanism on x86_64.
We now figure out the size of the system call table in arch code and stick
that in syscall_table_size. arch/um/kernel/skas/syscall.c defines
NR_syscalls in terms of that since its the only thing that needs to know
how many system calls there are.
The old mechananism that was used on x86_64 is gone.
arch/um/include/sysdep-i386/syscalls.h got some formatting since I was
looking at it.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:28 +0000 (22:31 -0800)]
uml: defconfig tweaks
Tweak the UML defconfig -
we probably don't need 256 old-style ptys - this slows down udev
noticably
enable hostfs
disable slab debugging - another noticable performance hit
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Walker [Tue, 5 Feb 2008 06:31:27 +0000 (22:31 -0800)]
uml: port mutex conversion
The port_sem is already used as a mutex since it's using DECLARE_MUTEX(), but
the underlying construct is still a semaphore .. This patch switches it over
to a struct mutex.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Walker [Tue, 5 Feb 2008 06:31:27 +0000 (22:31 -0800)]
uml: mconsole mutex conversion
The plug_mem_mutex is already used as a mutex since it's using
DECLARE_MUTEX(), but the underlying construct is still a semaphore .. This
patch switches it over to a struct mutex.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Walker [Tue, 5 Feb 2008 06:31:26 +0000 (22:31 -0800)]
uml: LDT mutex conversion
The ldt.semaphore conforms to the new struct mutex requirments, so I converted
it to use the new API and changed the name.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:25 +0000 (22:31 -0800)]
uml: use of a public MAC is a warning, not an error
Downgrade one of the MAC validity checks. If it's one that could be possibly
assigned to a physical NIC, then nothing will break. So, emit a warning in
this case, but keep the requested MAC.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Karol Swietlicki [Tue, 5 Feb 2008 06:31:25 +0000 (22:31 -0800)]
uml: fix infinite mconsole loop
This patch takes care of a problem with the stopping code.
The function inside the while condition returns 0 to signify a problem. A
problem could be for example a bad command or a bad version of the mconsole
client. A bad command would terminate the stopping loop and resume the
kernel. This is a problem.
A better solution is to make the loop infinite and don't leave it until we are
explicitly told to.
Signed-off-by: Karol Swietlicki <magotari@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:24 +0000 (22:31 -0800)]
uml: remove map_cb
John Reiser noticed that a physical memory region was being mapped twice.
This patch fixes that, and it inlines the responsible function, as that had
only one caller.
Cc: John Reiser <jreiser@BitWagon.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WANG Cong [Tue, 5 Feb 2008 06:31:23 +0000 (22:31 -0800)]
uml: remove TOPDIR
TOPDIR is obsolete, use srctree instead. This patch removes TOPDIR from all
UML Makefiles.
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:22 +0000 (22:31 -0800)]
uml: remove unused fields from mm_context
The 3-level page table fixes forgot to remove a couple now-unused fields from
struct mm_context.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:22 +0000 (22:31 -0800)]
uml: move register initialization
Calling init_registers inside the skas3 checking causes mysterious crashes if
it doesn't happen because the skas3 checking is bypassed. This patch moves it
to os_early_checks.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:21 +0000 (22:31 -0800)]
uml: add newlines to printks
Some printks were missing newlines.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:20 +0000 (22:31 -0800)]
uml: style fixes in arch/um/sys-x86_64
Style fixes in arch/um/sys-x86_64:
updated copyrights
CodingStyle fixes
added severities to printks which needed them
A bunch of functions in sys-*/ptrace_user.c turn out to be unused, so they and
their declarations are gone.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:19 +0000 (22:31 -0800)]
uml: add back CONFIG_HZ
avoid-overflows-in-kernel-timec.patch makes CONFIG_HZ necessary for a
successful build. UML lacks a definition, so this patch adds one. It also
changes the hard-wired definition of HZ to CONFIG_HZ.
Note: this patch is a good idea even in the absence of hpa's time fixes.
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:19 +0000 (22:31 -0800)]
uml: DEBUG_SHIRQ fixes
A couple more DEBUG_SHIRQ fixes.
The previous mconsole blocking fix exposed the lack of O_NONBLOCK on the
mconsole socket.
Also, winch_interrupt started crashing because it is called at irq free time
and it tries to dereference tty->driver_data, which has already been set to
NULL.
I added some error cleanup in mconsole_init while I was there.
Cc: "Karol Swietlicki" <magotari@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:18 +0000 (22:31 -0800)]
uml: remove fakehd
The fakehd switch lost its implementation at some point. Since no one is
screaming for it, we might as well remove it.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:18 +0000 (22:31 -0800)]
uml: implement O_APPEND
The .a flags in openflags never had an implementation.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 5 Feb 2008 06:31:17 +0000 (22:31 -0800)]
uml: SMP locking commentary
Add some more commentary about various pieces of global data not needing
locking.
Also got rid of unmap_physmem since that is no longer used.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This page took 0.047271 seconds and 5 git commands to generate.