Robert Richter [Thu, 9 Jul 2009 13:12:35 +0000 (15:12 +0200)]
x86/oprofile: Remove const qualifier from struct op_x86_model_spec
This patch removes the const qualifier from struct
op_x86_model_spec to make model parameters changable.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Thu, 9 Jul 2009 12:38:49 +0000 (14:38 +0200)]
x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c
This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Thu, 9 Jul 2009 12:38:49 +0000 (14:38 +0200)]
x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in nmi_int.c
This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Thu, 9 Jul 2009 12:38:49 +0000 (14:38 +0200)]
x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c
This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Thu, 9 Jul 2009 12:40:04 +0000 (14:40 +0200)]
x86/oprofile: Implement multiplexing setup/shutdown functions
This patch implements nmi_setup_mux() and nmi_shutdown_mux() functions
to setup/shutdown multiplexing. Multiplexing code in nmi_int.c is now
much more separated.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Thu, 16 Jul 2009 11:09:53 +0000 (13:09 +0200)]
oprofile: Grouping multiplexing code in op_model_amd.c
This patch moves some multiplexing code to the new function
op_mux_fill_in_addresses(). Also, the whole multiplexing code is now
at a single location.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Thu, 16 Jul 2009 11:04:43 +0000 (13:04 +0200)]
oprofile: Introduce op_x86_phys_to_virt()
This new function translates physical to virtual counter numbers.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Fri, 19 Jun 2009 14:45:34 +0000 (16:45 +0200)]
oprofile: Grouping multiplexing code in oprof.c
This patch moves multiplexing code to a single section of code. This
reduces the use of #ifdefs especially within functions.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Wed, 15 Jul 2009 13:44:18 +0000 (15:44 +0200)]
oprofile: Remove oprofile_multiplexing_init()
oprofile_multiplexing_init() can be removed when moving the
initialization of oprofile_time_slice to oprofile_create_files().
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Wed, 15 Jul 2009 13:19:29 +0000 (15:19 +0200)]
oprofile: Rename variable timeout_jiffies and move to oprofile_files.c
This patch renames timeout_jiffies into an oprofile specific name. The
macro MULTIPLEXING_TIMER_DEFAULT is changed too.
Also, since this variable is controlled using oprofilefs, its
definition is moved to oprofile_files.c.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Wed, 15 Jul 2009 13:44:18 +0000 (15:44 +0200)]
oprofile: oprofile_set_timeout(), return with error for invalid args
Return with -EINVAL for invalid parameters instead of setting the
default value in oprofile_set_timeout().
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Thu, 9 Jul 2009 17:23:50 +0000 (19:23 +0200)]
x86/oprofile: Fix initialization of switch_index
Variable switch_index must be initialized for each cpu. This patch
fixes the initialization by moving it to the per-cpu init function
nmi_cpu_setup().
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Thu, 9 Jul 2009 14:29:34 +0000 (16:29 +0200)]
x86/oprofile: Use per_cpu() instead of __get_cpu_var()
__get_cpu_var() calls smp_processor_id(). When the cpu id is already
known, instead use per_cpu() to avoid generating the id again.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Wed, 8 Jul 2009 12:54:17 +0000 (14:54 +0200)]
x86/oprofile: Fix usage of NUM_CONTROLS/NUM_COUNTERS macros
Use the corresponding macros when iterating over counter and control
registers. Since NUM_CONTROLS and NUM_COUNTERS are equal for AMD cpus
the fix is more a cosmetical change.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Jason Yeh [Wed, 8 Jul 2009 11:49:38 +0000 (13:49 +0200)]
oprofile: Implement performance counter multiplexing
The number of hardware counters is limited. The multiplexing feature
enables OProfile to gather more events than counters are provided by
the hardware. This is realized by switching between events at an user
specified time interval.
A new file (/dev/oprofile/time_slice) is added for the user to specify
the timer interval in ms. If the number of events to profile is higher
than the number of hardware counters available, the patch will
schedule a work queue that switches the event counter and re-writes
the different sets of values into it. The switching mechanism needs to
be implemented for each architecture to support multiplexing. This
patch only implements AMD CPU support, but multiplexing can be easily
extended for other models and architectures.
There are follow-on patches that rework parts of this patch.
Signed-off-by: Jason Yeh <jason.yeh@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Tue, 7 Jul 2009 17:25:39 +0000 (19:25 +0200)]
x86/oprofile: Whitespaces changes only
This patch fixes whitespace changes of code that will be touched in
follow-on patches.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Thu, 9 Jul 2009 16:33:02 +0000 (18:33 +0200)]
x86/oprofile: Rework and simplify nmi_cpu_setup()
This patch removes the function nmi_save_registers(). Per-cpu code is
now executed only in the function nmi_cpu_setup(). Also, it renames
the per-cpu function nmi_restore_registers() to
nmi_cpu_restore_registers().
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Tue, 7 Jul 2009 17:30:25 +0000 (19:30 +0200)]
x86/oprofile: Fix cast of counter value
When casting the counter value to a 64 bit value in 32 bit mode, sign
extension may lead to broken counter values. This patch fixes this by
casting to (u64) instead of (s64).
Signed-off-by: Robert Richter <robert.richter@amd.com>
Robert Richter [Tue, 14 Jul 2009 13:20:44 +0000 (15:20 +0200)]
Merge commit 'v2.6.31-rc3'; commit 'tip/oprofile' into oprofile/core
Conflicts:
drivers/oprofile/oprofile_stats.c
drivers/usb/otg/Kconfig
drivers/usb/otg/Makefile
Signed-off-by: Robert Richter <robert.richter@amd.com>
Linus Torvalds [Tue, 14 Jul 2009 01:18:52 +0000 (18:18 -0700)]
Linux 2.6.31-rc3
Linus Torvalds [Mon, 13 Jul 2009 23:39:25 +0000 (16:39 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: fix race between write_metadata_buffer and get_write_access
ext4: Fix ext4_mb_initialize_context() to initialize all fields
ext4: fix null handler of ioctls in no journal mode
ext4: Fix buffer head reference leak in no-journal mode
ext4: Move __ext4_journalled_writepage() to avoid forward declaration
ext4: Fix mmap/truncate race when blocksize < pagesize && !nodellaoc
ext4: Fix mmap/truncate race when blocksize < pagesize && delayed allocation
ext4: Don't look at buffer_heads outside i_size.
ext4: Fix goal inum check in the inode allocator
ext4: fix no journal corruption with locale-gen
ext4: Calculate required journal credits for inserting an extent properly
ext4: Fix truncation of symlinks after failed write
jbd2: Fix a race between checkpointing code and journal_get_write_access()
ext4: Use rcu_barrier() on module unload.
ext4: naturally align struct ext4_allocation_request
ext4: mark several more functions in mballoc.c as noinline
ext4: Fix potential reclaim deadlock when truncating partial block
jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region
ext4: Fix type warning on 64-bit platforms in tracing events header
dingdinghua [Mon, 13 Jul 2009 21:55:35 +0000 (17:55 -0400)]
jbd2: fix race between write_metadata_buffer and get_write_access
The function jbd2_journal_write_metadata_buffer() calls
jbd_unlock_bh_state(bh_in) too early; this could potentially allow
another thread to call get_write_access on the buffer head, modify the
data, and dirty it, and allowing the wrong data to be written into the
journal. Fortunately, if we lose this race, the only time this will
actually cause filesystem corruption is if there is a system crash or
other unclean shutdown of the system before the next commit can take
place.
Signed-off-by: dingdinghua <dingdinghua85@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Linus Torvalds [Mon, 13 Jul 2009 17:24:43 +0000 (10:24 -0700)]
Merge git://git./linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error
Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
Staging: rtl8192su: convert to net_device_ops
Staging: serqt_usb2: declare qt_open static in serqt_usb2
Staging: serqt_usb2: fix qt_close parameters in serqt_usb2
Staging: comedi: jr3_pci.c: add required includes
Staging: meilhaus: add email address to TODO
Staging: rspiusb: use NULL virtual address instead of a bogus one
Staging: vt6655: compile fix
Staging: rt2870: Add USB ID for Sitecom WL-608
Linus Torvalds [Mon, 13 Jul 2009 17:24:08 +0000 (10:24 -0700)]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
wm97xx_batery: replace driver_data with dev_get_drvdata()
omap: video: remove direct access of driver_data
Sound: remove direct access of driver_data
driver model: fix show/store prototypes in doc.
Firmware: firmware_class, fix lock imbalance
Driver Core: remove BUS_ID_SIZE
sparc: remove driver-core BUS_ID_SIZE
partitions: fix broken uevent_suppress conversion
devres: WARN() and return, don't crash on device_del() of uninitialized device
Linus Torvalds [Mon, 13 Jul 2009 17:23:03 +0000 (10:23 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits)
USB: otg: fix module reinsert issue
USB: handle zero-length usbfs submissions correctly
USB: EHCI: report actual_length for iso transfers
USB: option: remove unnecessary and erroneous code
USB: cypress_m8: remove invalid Clear-Halt
USB: musb_host: undo incorrect change in musb_advance_schedule()
USB: fix LANGID=0 regression
USB: serial: sierra driver id_table additions
USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
USB: fix race leading to a write after kfree in usbfs
USB: Sierra: fix oops upon device close
USB: option.c: add A-Link 3GU device id
USB: Serial: Add support for Arkham Technology adapters
USB: Fix option_ms regression in 2.6.31-rc2
USB: gadget audio: select SND_PCM
USB: ftdi: support NDI devices
Revert USB: usbfs: deprecate and hide option for !embedded
USB: usb.h: fix kernel-doc notation
USB: RNDIS gadget, fix issues talking from PXA
USB: serial: FTDI with product code FB80 and vendor id 0403
...
Dave Kleikamp [Mon, 13 Jul 2009 16:02:24 +0000 (11:02 -0500)]
update JFS entry in MAINTAINERS
JFS hasn't really been supported for a while. It's still maintained,
but saying it's supported is a stretch. Updating my preferred email
address as well.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Weiyi [Mon, 13 Jul 2009 14:09:25 +0000 (15:09 +0100)]
mn10300: remove duplicated #include
Remove duplicated #include('s) in
arch/mn10300/kernel/sys_mn10300.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jean Delvare [Mon, 13 Jul 2009 10:39:05 +0000 (12:39 +0200)]
Fix staging drivers after smp_lock.h redux
Commit
405f55712dfe464b3240d7816cc4fe4174831be2 ("headers: smp_lock.h
redux") broke the build of two staging drivers. Fix them.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Theodore Ts'o [Mon, 13 Jul 2009 13:45:52 +0000 (09:45 -0400)]
ext4: Fix ext4_mb_initialize_context() to initialize all fields
Pavel Roskin pointed out that kmemcheck indicated that
ext4_mb_store_history() was accessing uninitialized values of
ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc
history. Fix this by initializing the entire structure to all zeros
first.
Also, two fields were getting doubly initialized by the caller of
ext4_mb_initialize_context, so remove them for efficiency's sake.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Peng Tao [Mon, 13 Jul 2009 13:30:17 +0000 (09:30 -0400)]
ext4: fix null handler of ioctls in no journal mode
The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not
flush the journal in no_journal mode. Otherwise, running resize2fs on
a mounted no_journal partition triggers the following error messages:
BUG: unable to handle kernel NULL pointer dereference at
00000014
IP: [<
c039d282>] _spin_lock+0x8/0x19
*pde =
00000000
Oops: 0002 [#1] SMP
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Curt Wohlgemuth [Mon, 13 Jul 2009 13:07:20 +0000 (09:07 -0400)]
ext4: Fix buffer head reference leak in no-journal mode
We found a problem with buffer head reference leaks when using an ext4
partition without a journal. In particular, calls to ext4_forget() would
not to a brelse() on the input buffer head, which will cause pages they
belong to to not be reclaimable.
Further investigation showed that all places where ext4_journal_forget() and
ext4_journal_revoke() are called are subject to the same problem. The patch
below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit
release of the buffer head when the journal handle isn't valid.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ajay Kumar Gupta [Fri, 3 Jul 2009 07:48:45 +0000 (13:18 +0530)]
USB: otg: fix module reinsert issue
Platform_device instance (pd) is not set to NULL in
usb_nop_xceiv_unregister() causing usb_nop_xceiv_register()
to fail during module reinsert.
From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Babu Ravi <ravibabu@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Alan Stern [Mon, 29 Jun 2009 15:04:54 +0000 (11:04 -0400)]
USB: handle zero-length usbfs submissions correctly
This patch (as1262) fixes a bug in usbfs: It refuses to accept
zero-length transfers, and it insists that the buffer pointer be valid
even if there is no data being transferred.
The patch also consolidates a bunch of repetitive access_ok() checks
into a single check, which incidentally fixes the lack of such a check
for Isochronous URBs.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 29 Jun 2009 18:34:59 +0000 (14:34 -0400)]
USB: EHCI: report actual_length for iso transfers
This patch (as1259b) makes ehci-hcd return the total number of bytes
transferred in urb->actual_length for Isochronous transfers.
Until now, the actual_length value was unaccountably left at 0.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 9 Jul 2009 16:58:43 +0000 (12:58 -0400)]
USB: option: remove unnecessary and erroneous code
This patch (as1264) removes a bunch of unnecessary and erroneous stuff
from the option USB-serial driver. Clearly there's no need to verify
that the device pointer stored in the URBs is right or to store the
same pointer over again. After all, the pointer can't change once it
has been set up.
There's also no need to call usb_clear_halt for the IN endpoint
multiple times -- in fact, doing so is an error since every time after
the first there will be active URBs queued for that endpoint. Since
the Clear-Halts don't appear to be needed at all, the patch simply
removes them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 9 Jul 2009 16:59:57 +0000 (12:59 -0400)]
USB: cypress_m8: remove invalid Clear-Halt
This patch (as1265) removes an erroneous call to usb_clear_halt from
the cypress_m8 driver. The call isn't valid because it is made from
interrupt context whereas usb_clear_halt is a blocking routine.
Presumably the code has never been executed; if it did it would cause
an oops. So instead treat -EPIPE like any other sort of unexplained
error.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sergei Shtylyov [Fri, 10 Jul 2009 17:02:44 +0000 (20:02 +0300)]
USB: musb_host: undo incorrect change in musb_advance_schedule()
Commit
c9cd06b3d6ea825c62e277def929cc4315802b48 (musb_host: refactor
URB giveback) included due to my overlook the change incorrect in the
context of the current kernel -- undo it.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Daniel Mack [Fri, 10 Jul 2009 09:04:58 +0000 (11:04 +0200)]
USB: fix LANGID=0 regression
commit
b7af0bb ("USB: allow malformed LANGID descriptors") broke support
for devices without string descriptor support.
Reporting string descriptors is optional to USB devices, and a device
lets us know it can't deal with strings by responding to the LANGID
request with a STALL token.
The kernel handled that correctly before
b7af0bb came in, but failed
hard if the LANGID was reported but broken. More than that, if a device
was not able to provide string descriptors, the LANGID was retrieved
over and over again at each string read request.
This patch changes the behaviour so that
a) the LANGID is only queried once
b) devices which can't handle string requests are not asked again
c) devices with malformed LANGID values have a sane fallback to 0x0409
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Elina Pasheva [Fri, 10 Jul 2009 00:55:18 +0000 (17:55 -0700)]
USB: serial: sierra driver id_table additions
- Updated the id_table with all devices that Sierra Wireless currently
support
- Re-ordered the contents of the id_table for better readability
Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Krzysztof Halasa [Thu, 9 Jul 2009 23:06:23 +0000 (01:06 +0200)]
USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
Signed-off-by: Krzysztof Ha³asa <khc@pm.waw.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Wed, 8 Jul 2009 17:09:23 +0000 (19:09 +0200)]
USB: fix race leading to a write after kfree in usbfs
this fixes a race between async_completed() and proc_reapurbnonblock().
CPU A CPU B
spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
spin_unlock(&ps->lock);
if (!(as = async_getcompleted(ps)))
return -EAGAIN;
return processcompl(as, (void __user * __user *)arg);
processcompl() calls free_async() which calls kfree(as)
as->status = urb->status;
if (as->signr) {
sinfo.si_signo = as->signr;
sinfo.si_errno = as->status;
sinfo.si_code = SI_ASYNCIO;
sinfo.si_addr = as->userurb;
kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
as->euid, as->secid);
}
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb, as->userurb);
write after kfree
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Alan Stern [Tue, 7 Jul 2009 13:50:14 +0000 (09:50 -0400)]
USB: Sierra: fix oops upon device close
This patch (as1263) fixes a mixup that occurred when conflicting
patches for the sierra driver were merged incorrectly. The former
sierra_shutdown routine should have been become sierra_release, not
sierra_disconnect.
The symptom this fixes is an oops when the device file is closed after
a Sierra device has been unplugged (Bugzilla #13675).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Peter Naulls <peter@mushroomnetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anssi Hannula [Mon, 6 Jul 2009 16:08:59 +0000 (19:08 +0300)]
USB: option.c: add A-Link 3GU device id
Add A-Link 3GU device id 1e0e:9200 into option driver. The device
has 4 interfaces, of which 1 is handled by storage and the other 3
by option driver.
The device appears first as CD-only 1e0e:f000 device and must be
switched to 1e0e:9200 mode either by using "eject CD" or
usb_modeswitch.
For the record, the device does not work with generic usbserial
driver (usb disconnect when sending the ATDT command).
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Amit Kucheria [Mon, 6 Jul 2009 11:19:59 +0000 (14:19 +0300)]
USB: Serial: Add support for Arkham Technology adapters
As reported by David Potts from Arkham Technology, the current driver
works with their hardware on addition of the device ids.
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan McDowell [Sun, 5 Jul 2009 11:29:51 +0000 (12:29 +0100)]
USB: Fix option_ms regression in 2.6.31-rc2
Commit
32ebbe7b6ad44ae9c276419710b56de6ba705303 which filters the
SCSI REZERO command in option_ms based on a SCSI INQUIRY with a vendor
of Option breaks my Option Icon 225 (0af0:6971). This device returns a
vendor of ZCOPTION for the ZeroCD device. The following trivial patch
fixes things for me.
Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Fri, 3 Jul 2009 20:26:57 +0000 (13:26 -0700)]
USB: gadget audio: select SND_PCM
Fix USB gadget audio: select SND_PCM, like many other sound
drivers do, to fix build errors:
drivers/built-in.o: In function `f_audio_playback_work':
audio.c:(.text+0x15a3e7): undefined reference to `snd_pcm_kernel_ioctl'
audio.c:(.text+0x15a471): undefined reference to `snd_pcm_lib_write'
drivers/built-in.o: In function `_snd_pcm_hw_param_set':
audio.c:(.text+0x15aca7): undefined reference to `snd_interval_refine'
drivers/built-in.o: In function `gaudio_setup':
(.init.text+0x12adf): undefined reference to `_snd_pcm_hw_params_any'
drivers/built-in.o: In function `gaudio_setup':
(.init.text+0x12b43): undefined reference to `snd_pcm_kernel_ioctl'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Martin Geleynse [Thu, 2 Jul 2009 17:10:35 +0000 (13:10 -0400)]
USB: ftdi: support NDI devices
It enhances the driver for FTDI-based USB serial adapters to recognize and
support Northern Digital Inc (NDI) measurement equipment. NDI has been
providing this patch for various kernel flavors for several years and we would
like to see these changes built in to the driver so that our equipement works
without the need for customers to patch the kernel themselves.
The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c
and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things:
1. Define the VID and PIDs to allow the driver to recognize the NDI devices.
2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb
We would have chosen to map 38400 to the higher rate, similar to what
several other vendors have done, but some of our legacy customers actually
use 38400, therefore we remap 19200 to the higher rate.
3. We set the default transmit latency in the FTDI chip to 1ms for our devices.
Our devices are typically polled at 60Hz and the default ftdi latency
seriously affects turn-around time and results in missed data frames. We
have created a modprobe option that allows this setting to be increased.
This has proven necessary particularly in some virtualized environments.
Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 10 Jul 2009 04:35:49 +0000 (21:35 -0700)]
Revert USB: usbfs: deprecate and hide option for !embedded
This reverts commit
cc71329b3b89b4a5be849b617f2c4f151f0b9213, so that
Red Hat machines can boot properly. It seems that the Red Hat initrd
code tries to watch the /proc/bus/usb/devices file to monitor usb
devices showing up. While this task is prone to lots of races and does
not show the true state of the system, they seem to like it.
So for now, don't move this option under the EMBEDDED config option.
Cc: Scott James Remnant <scott@canonical.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Thu, 18 Jun 2009 17:39:11 +0000 (10:39 -0700)]
USB: usb.h: fix kernel-doc notation
Fix usb.h kernel-doc warnings:
Warning(include/linux/usb.h:918): Excess struct/union/enum/typedef member 'nodename' description in 'usb_device_driver'
Warning(include/linux/usb.h:939): No description found for parameter 'nodename'
Warning(include/linux/usb.h:1219): No description found for parameter 'sg'
Warning(include/linux/usb.h:1219): No description found for parameter 'num_sgs'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Fri, 19 Jun 2009 10:09:04 +0000 (03:09 -0700)]
USB: RNDIS gadget, fix issues talking from PXA
The reworked Ethernet gadget has an RNDIS interop problem when used
with the CDC subset driver ... e.g. on PXA 2xx and 3xx hardware,
which currently has a hard time talking to MS-Windows hosts.
The issue is that Microsoft requires USB_CLASS_COMM. Fix by tweaking
the CDC subset driver to not switch to USB_CLASS_VENDOR_SPEC if RNDIS
is used in some other device configuration.
[ UPDATED: some "statements" were comma-terminated; fix that. ]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Aric Blumer <aric@sdgsystems.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Folkert van Heusden [Fri, 19 Jun 2009 20:14:42 +0000 (22:14 +0200)]
USB: serial: FTDI with product code FB80 and vendor id 0403
It seems an USB device with vendor id 0403 and product code FB80 has an
FTDI serial io chip as well: http://ftdichip.com/Drivers/D2XX.htm
This device in fact is a true random generantor by comsci:
http://comscire.com/Products/R2000KU/
So the following patch should add support for this device if I am
correct. Not tested as I do not own this device (I would like support in
the kernel so that my entropybroker application (which distributes
entrop data (random values) between servers and clients)).
From: Folkert van Heusden <folkert@vanheusden.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jason Wessel [Mon, 22 Jun 2009 16:32:20 +0000 (11:32 -0500)]
USB: console: Fix regression in usb console on kernel boot
The commit
335f8514f200e63d689113d29cb7253a5c282967 introduced a
regression which stopped usb consoles from working correctly as a
kernel boot console as well as interactive login device.
The addition of the serial_close() which in turn calls
tty_port_close_start() will change the reference count of port.count
and warn about it. The usb console code had previously incremented
the port.count to indicate it was making use of the device as a
console and the forced change causes a double open on the usb device
which leads to a non obvious kernel oops later on when the tty is
freed.
To fix the problem instead make use of port->console to track if the
port is in fact an active console port to avoid double initialization
of the usb serial device. The port.count is incremented and
decremented only with in the scope of usb_console_setup() for the
purpose of the low level driver initialization.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Frans Pop [Fri, 26 Jun 2009 14:10:19 +0000 (16:10 +0200)]
USB: add missing class descriptions used in usb/devices file
Added descriptions (for WIRELESS_CONTROLLER and MISC) were taken from
the usb-devices script now included in usbutils.
Also sort the classes in the same order as in include/linux/usb/ch9.h
for easier comparison for future updates.
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Sun, 28 Jun 2009 21:34:14 +0000 (23:34 +0200)]
USB: fix memleak in usbfs
This patch fixes a memory leak in devio.c::processcompl
If writing to user space fails the packet must be discarded, as it
already has been removed from the queue of completed packets.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 29 Jun 2009 21:36:14 +0000 (17:36 -0400)]
USB: EHCI: check for STALL before other errors
This patch (as1257) revises the way ehci-hcd detects STALLs. The
logic is a little peculiar because there's no hardware status bit
specifically meant to indicate a STALL. You just have to guess that a
STALL was received if the BABBLE bit (which is fatal) isn't set and
the transfer stopped before all its retries were used up.
The existing code doesn't do this properly, because it tests for MMF
(Missed MicroFrame) and DBE (Data Buffer Error) before testing the
retry counter. Thus, if a transaction gets either MMF or DBE the
corresponding flag is set and the transaction is retried. If the
second attempt receives a STALL then -EPIPE is the correct return
value. But the existing code would see the MMF or DBE flag instead
and return -EPROTO, -ENOSR, or -ECOMM.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 29 Jun 2009 14:47:30 +0000 (10:47 -0400)]
USB: EHCI: use the new clear_tt_buffer interface
This patch (as1256) changes ehci-hcd and all the other drivers in the
EHCI family to make use of the new clear_tt_buffer callbacks. When a
Clear-TT-Buffer request is in progress for a QH, the QH is not allowed
to be linked into the async schedule until the request is finished.
At that time, if there are any URBs queued for the QH, it is linked
into the async schedule.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 29 Jun 2009 14:43:32 +0000 (10:43 -0400)]
USB: fix the clear_tt_buffer interface
This patch (as1255) updates the interface for calling
usb_hub_clear_tt_buffer(). Even the name of the function is changed!
When an async URB (i.e., Control or Bulk) going through a high-speed
hub to a non-high-speed device is cancelled or fails, the hub's
Transaction Translator buffer may be left busy still trying to
complete the transaction. The buffer has to be cleared; that's what
usb_hub_clear_tt_buffer() does.
It isn't safe to send any more URBs to the same endpoint until the TT
buffer is fully clear. Therefore the HCD needs to be told when the
Clear-TT-Buffer request has finished. This patch adds a callback
method to struct hc_driver for that purpose, and makes the hub driver
invoke the callback at the proper time.
The patch also changes a couple of names; "hub_tt_kevent" and
"tt.kevent" now look rather antiquated.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Tue, 30 Jun 2009 07:44:24 +0000 (09:44 +0200)]
USB: fix uninitialised variable in ti_do_download
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Williams [Tue, 30 Jun 2009 20:09:28 +0000 (16:09 -0400)]
USB: option: add Novatel Ovation MC760
Used by Virgin Mobile with the Broadband2Go service, for example.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arseniy Lartsev [Wed, 1 Jul 2009 12:27:26 +0000 (16:27 +0400)]
USB: cdc-acm: work around some broken devices
This patch introduces a work around for cdc-acm devices which are
low speed contrary to the specification, which requires bulk endpoints
which are banned in low speed and converted by usbcore to virtual
interrupt endpoints if they are used nevertheless.
Signed-off-by: Arseniy Lartsev <ars3n@yandex.ru>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Wed, 1 Jul 2009 10:36:16 +0000 (03:36 -0700)]
USB: musb: silence "suspend as a_wait_vrise is_active" msgs
Get rid of some obnoxious and inappropriate messaging, mostly on
DaVinci, when usbcore tries to autosuspend a root hub if just a
mini/micro-A connector is connected. Symptom: endless stream of
messages reading like:
musb_bus_suspend 2221: trying to suspend as a_wait_vrise is_active=1
Improve that musb bus suspend primitive a bit. Take advantage of
this call to update the OTG state machine if appropriate, moving
the device out of the A_WAIT_VRISE state. There's basically no
timer for that state transition just now, except with tusb6010;
that can make trouble.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Wed, 1 Jul 2009 10:43:58 +0000 (03:43 -0700)]
USB: gadget: pxa25x compiler warning fix
Fix config-dependent compiler warning:
CC drivers/usb/gadget/pxa25x_udc.o
drivers/usb/gadget/pxa25x_udc.c: In function 'pxa25x_udc_irq':
drivers/usb/gadget/pxa25x_udc.c:1806: warning: array subscript is above array bounds
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Philipp Zabel [Wed, 1 Jul 2009 10:42:45 +0000 (03:42 -0700)]
USB: gadget: pxa25x uses gpio_is_valid
Use gpio_is_valid instead of assuming that every GPIO
number != 0 is valid while 0 is not.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kevin Hilman [Wed, 1 Jul 2009 10:33:46 +0000 (03:33 -0700)]
USB: musb: davinci dm6446evm GPIO renumbering
Numbering for GPIOs on the pcf857x chips on the dm644x EVM board
changed when DaVinci chips with more GPIOs were supported. Update
the GPIO number used for nVBUS_DRV.
Longer term, we need a better abstraction of board-specific setup in
this code so we're not hard-coding board specific GPIOs into the
driver, but for now this at least gets it back to working with
mainline davinci core code.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Wed, 1 Jul 2009 10:32:43 +0000 (03:32 -0700)]
USB: musb: davinci dm355 updates (remainder)
Finish merging updates for DM355 chips into musb/davinci.c now
that its support is in mainline: kick in new DRVVBUS controls.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Qiuping Chen [Wed, 1 Jul 2009 10:49:29 +0000 (03:49 -0700)]
USB: gadget: rndis conformance tweak
Support OID_802_3_MAC_OPTIONS in gen_ndis_query_resp() of rndis.c to
make RNDIS gadget pass 1c_SetMulticast subtest in Microsoft NDISTest6:
http://www.microsoft.com/whdc/DevTools/tools/NDIStest.mspx
The other tests in NDISTest6 are passed.
[ dbrownell@users.sourceforge.net: remove OID_802_3_MAXIMUM_LIST_SIZE
setting ... it was bogus, this code only handles one entry, not 32.
And we don't know what would break if we lied about that... ]
Signed-off-by: Helen Chen <helen.chen@intel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Thu, 2 Jul 2009 14:41:39 +0000 (16:41 +0200)]
USB: fix memory leak in usbtmc
If an error is returned kfree must also be called.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arnd Bergmann [Fri, 19 Jun 2009 12:35:34 +0000 (05:35 -0700)]
USB: buildfix ppc randconfig
We could just make the USB_OHCI_HCD_PPC_OF option implicit
and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
and USB_OHCI_HCD_PPC_OF_LE are set.
[ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 26 Jun 2009 15:05:20 +0000 (08:05 -0700)]
USB: ti_usb_3410_5052: fix duplicate device ids.
commit
1a1fab513734b3a4fca1bee8229e5ff7e1cb873c accidentally added the
device id to both tables in the driver, which causes problems as this is
only a single port device, not a multiple port device.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 23 Jun 2009 23:01:06 +0000 (16:01 -0700)]
USB: gadget: audio: provide correct device id
The audio gadget driver should use a "Linux" device id, instead
of relying on NetChip's vendor id. So provide one out of our reserved
namespace.
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 23 Jun 2009 22:58:48 +0000 (15:58 -0700)]
Revert "USB: Add Intel Langwell USB OTG Transceiver Drive"
This reverts commit
453f77558810ffa669ed5a510a7173ec49def396.
The driver should not have been accepted as the MSRT code is not
in the main kernel yet, which this depends on.
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Hao Wu <hao.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brad Lu [Tue, 16 Jun 2009 10:04:00 +0000 (18:04 +0800)]
USB: option.c to support Qisda H21/H20 usb modem
This patch added Qisda(VID) & H21/H20(PID) into to supporting list.
Please help to check this patch,
From: Brad Lu <Brad.Lu@Qisda.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kai Engert [Fri, 12 Jun 2009 06:51:37 +0000 (08:51 +0200)]
USB: option.c: add Qualcomm/Option iCON 210 modem
Add modem portion of USB device labeled:
Model iCON 210, Qualcomm 3G HSDPA, designed in EU by Option
Device starts in usb-storage mode (1e0e:f000) and requires the use of a tool
like usb_modeswitch to switch it to modem mode (1e0e:9000).
Signed-off-by: Kai Engert <kaie@kuix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Frysinger [Fri, 12 Jun 2009 01:59:00 +0000 (21:59 -0400)]
USB: isp1760: use __devexit_p() for remove function
The isp1760_plat_remove function is declared with __devexit, so the
.remove assignment needs to be wrapped with __devexit_p().
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 11 Jun 2009 18:56:22 +0000 (14:56 -0400)]
USB: EHCI: update toggle state for linked QHs
This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs"
patch. Since an HCD's endpoint_reset method can be called in
interrupt context, it mustn't assume that interrupts are enabled or
that it can sleep.
So we revert to the original way of refreshing QHs' toggle bits. Now
the endpoint_reset method merely clears the toggle flag in the device
structure (as was done before) and starts an async QH unlink. When the
QH is linked again, after the unlink finishes and an URB is queued,
the qh_refresh() routine will update the QH's toggle bit.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: David <david@unsolicited.net>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roel Kluin [Wed, 10 Jun 2009 19:57:35 +0000 (12:57 -0700)]
USB: fhci: mutually exclusive port_status
FHCI_PORT_DISABLED, -LOW and -FULL are mutually exclusive as status.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jan Capek [Wed, 10 Jun 2009 16:58:52 +0000 (18:58 +0200)]
USB: ftdi_sio - product ID's for CCS PIC programmers
The product ID's for the following devices have been added:
- LOAD-n-GO
- ICD-U64
- PRIME-8
Signed-off-by: Jan Capek <jan@ccsinfo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Paulius Zaleckas [Tue, 9 Jun 2009 08:11:16 +0000 (11:11 +0300)]
USB: gadget: fix imx_udc entry in Kconfig
Move USB_GADGET_IMX to the right section of Kconfig as this
controller is available only as integrated on i.MX CPU.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Gianpaolo Cugola [Fri, 5 Jun 2009 20:57:52 +0000 (22:57 +0200)]
USB: pl2303: New vendor and product id for the prolific driver
I recently bought a PC interface for the Cressi Edy dive computer
(www.cressi.it) and discovered that it uses the pl2303 chip, albeit
with ad-hoc vendor and product ids (04b8, 0521 respectively). Being in
the process of writing a linux software for such device (cressi only
provides a windows software), I patched the pl2303 linux driver to
have the interface recognized. I am submitting you the patch (very
basic) for inclusion in next kernel version.
From: Gianpaolo Cugola <gianpaoloc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alexander Beregalov [Sat, 20 Jun 2009 16:58:33 +0000 (20:58 +0400)]
Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error
See commit
2d0ddec5b2b (mac80211: unify config_interface and
bss_info_changed)
This fixes a build error.
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Herton Ronaldo Krzesinski [Thu, 18 Jun 2009 17:43:56 +0000 (14:43 -0300)]
Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
The current s626 comedi driver in staging conflicts with philips SAA7146
media/dvb based cards, because it claims the same vendor:device pci id
for all subdevice/subvendor ids. What happens is that for people that have a
philips SAA7146 media/dvb based card, s626 if available gets loaded by udev
and makes system freeze (https://qa.mandriva.com/show_bug.cgi?id=51445).
The s626 driver shouldn't claim all 1131:7146 devices. Fix this by
specifying specific known subvendor:subdevice ids in its pci id table
list.
Also s626_attach is modified to use now pci_get_subsys instead of
pci_get_device as reported by Ian Abbott, and now we loop over pci id
table entries in case more ids are added in the future.
Reference: http://lkml.org/lkml/2009/6/16/552
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Aloni [Wed, 24 Jun 2009 19:34:39 +0000 (22:34 +0300)]
Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
(adapted from the rtl8187se patch)
ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.
length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17
This fix uses strl{cpy,cat} in addition to the reduction of the total
possible length of the output string by a char.
It can be applied to 2.6.30-stable as well.
Signed-off-by: Dan Aloni <dan@aloni.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Aloni [Sat, 20 Jun 2009 13:32:22 +0000 (16:32 +0300)]
Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
I repeatedly get __stack_chk_fail panic()s with this driver before
applying the attached fix.
ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.
length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17
This fix uses strl{cpy,cat} in addition to the reduction of the total
possible length of the output string by a char.
It can be applied to 2.6.30-stable as well.
Signed-off-by: Dan Aloni <dan@aloni.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bartlomiej Zolnierkiewicz [Thu, 11 Jun 2009 18:49:07 +0000 (20:49 +0200)]
Staging: rtl8192su: convert to net_device_ops
commit
e3804cbebb67887879102925961d41b503f7fbe3 removed
COMPAT_NET_DEV_OPS so this change is needed to make rtl8192su
buildable again.
Loosely based on Alexander's patch for rtl8187se, untested.
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bill Pemberton [Fri, 19 Jun 2009 16:32:57 +0000 (12:32 -0400)]
Staging: serqt_usb2: declare qt_open static in serqt_usb2
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bill Pemberton [Fri, 19 Jun 2009 16:32:56 +0000 (12:32 -0400)]
Staging: serqt_usb2: fix qt_close parameters in serqt_usb2
The parameter list for qt_close() was from the old non usb-serial
driver.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alexander Beregalov [Fri, 19 Jun 2009 23:52:47 +0000 (03:52 +0400)]
Staging: comedi: jr3_pci.c: add required includes
Fix this build errors:
jr3_pci.c:739: error: 'jiffies' undeclared
jr3_pci.c:748: error: implicit declaration of function 'msecs_to_jiffies'
jr3_pci.c:763: error: implicit declaration of function 'add_timer'
jr3_pci.c:790: error: implicit declaration of function 'init_timer'
jr3_pci.c:951: error: implicit declaration of function 'del_timer_sync'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 2 Jul 2009 19:55:39 +0000 (12:55 -0700)]
Staging: meilhaus: add email address to TODO
Meilhaus Support also wants to be notified of changes to these drivers.
Cc: David Kiliani <mail@davidkiliani.de>
Cc: Meilhaus Support <support@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Wed, 10 Jun 2009 20:44:14 +0000 (14:44 -0600)]
Staging: rspiusb: use NULL virtual address instead of a bogus one
The main problem here is that I just cannot see how this could ever
be correct:
usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i], pdx->udev, epAddr,
(dma_addr_t *) sg_dma_address(&pdx->sgl[frameInfo][i]),
sg_dma_len(&pdx->sgl[frameInfo][i]),
You cannot take a DMA address, cast it to a _pointer to_ a DMA address,
and then regard it as a virtual address of the transfer buffer.
However, finding the right virtual address was too hard for me,
so I just stubbed it with NULL. At least usbmon won't oops then
(it will not show any data but it's better than crashing).
Also, too big a buffer was allocated elsewhere.
And since we're at it, drop clearly unnecessary usb_buffer_alloc too,
leaving it where it may be useful.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Wed, 10 Jun 2009 16:30:49 +0000 (17:30 +0100)]
Staging: vt6655: compile fix
At least make it compile
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jorrit Schippers [Wed, 10 Jun 2009 13:34:26 +0000 (15:34 +0200)]
Staging: rt2870: Add USB ID for Sitecom WL-608
Add the USB id 0x0DF6,0x003F to the rt2870.h file such that the
Sitecom WL-608 device will be recognized by this driver.
Signed-off-by: Jorrit Schippers <jorrit@ncode.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alexander Beregalov [Tue, 23 Jun 2009 13:50:06 +0000 (17:50 +0400)]
wm97xx_batery: replace driver_data with dev_get_drvdata()
direct access of driver_data is going away.
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 23 Jun 2009 15:31:46 +0000 (08:31 -0700)]
omap: video: remove direct access of driver_data
dev_set/get_drvdata() should be used instead, as driver_data is going
away.
Cc: Imre Deak <imre.deak@nokia.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Trilok Soni <soni.trilok@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Felipe Contreras <felipe.contreras@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Mon, 22 Jun 2009 22:46:03 +0000 (15:46 -0700)]
Sound: remove direct access of driver_data
This is the last in-kernel direct usage of driver_data, replace it with
the proper dev_get/set_drvdata() calls.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
vibi sreenivasan [Wed, 8 Jul 2009 22:37:03 +0000 (15:37 -0700)]
driver model: fix show/store prototypes in doc.
FIX prototypes for show & store method in struct driver_attribute
Signed-off-by: vibi sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri Slaby [Sun, 21 Jun 2009 21:57:31 +0000 (23:57 +0200)]
Firmware: firmware_class, fix lock imbalance
Add omitted unlock in firmware_data_read.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kay Sievers [Thu, 2 Jul 2009 21:25:44 +0000 (23:25 +0200)]
Driver Core: remove BUS_ID_SIZE
The name size limit is gone from the driver-core, this is
the removal of the last left-over.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kay Sievers [Thu, 2 Jul 2009 21:27:22 +0000 (23:27 +0200)]
sparc: remove driver-core BUS_ID_SIZE
The name size limit is gone from the driver-core, the BUS_ID_SIZE
value will be removed.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Heiko Carstens [Thu, 11 Jun 2009 13:14:40 +0000 (15:14 +0200)]
partitions: fix broken uevent_suppress conversion
git commit
f67f129e "Driver core: implement uevent suppress in kobject"
contains this chunk for fs/partitions/check.c:
/* suppress uevent if the disk supresses it */
- if (!ddev->uevent_suppress)
+ if (!dev_get_uevent_suppress(pdev))
kobject_uevent(&pdev->kobj, KOBJ_ADD);
However that should have been
- if (!ddev->uevent_suppress)
+ if (!dev_get_uevent_suppress(ddev))
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Ming Lei <tom.leiming@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Benjamin Herrenschmidt [Wed, 10 Jun 2009 19:43:02 +0000 (12:43 -0700)]
devres: WARN() and return, don't crash on device_del() of uninitialized device
I just debugged an obscure crash caused by a device_del() of a all NULL'd
out struct device (in usb-serial) and found that a patch like this one would
have saved me time (in addition to improved chances of a bug report from
users hitting similar driver bugs).
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This page took 0.047428 seconds and 5 git commands to generate.