Patrick Tasse [Wed, 3 Jun 2015 17:13:48 +0000 (13:13 -0400)]
tmf: Periodically refresh raw viewer while scroll bar is dragged
Change-Id: Ifd5b3a4f751a75b223cf498defb23a1118c2c260
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/49394
Reviewed-by: Hudson CI
Patrick Tasse [Mon, 1 Jun 2015 20:32:08 +0000 (16:32 -0400)]
tmf: Periodically refresh virtual table while scroll bar is dragged
Change-Id: I9f0f93fa37c53f73cab6e203e6af0945a4fb58fb
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/49138
Reviewed-by: Hudson CI
Patrick Tasse [Fri, 29 May 2015 20:37:20 +0000 (16:37 -0400)]
tmf: Bug 468867: Time graph listener notifier interference from ext sync
Change-Id: Ibf072ff1bcd322dedcd3479cb2d08d051c332d50
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/49009
Reviewed-by: Hudson CI
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Tested-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Matthew Khouzam [Mon, 1 Jun 2015 02:30:36 +0000 (22:30 -0400)]
tmf.ui: Bug 469644: Clear axises of chart when trace is closed
It should be investigated if people would rather have NO axises
when they are cleared.
Change-Id: I566ba5abe15ad9cc5f7f2df5ed7ed74589e1cebb
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/49049
Reviewed-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Tested-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Marc-Andre Laperle [Fri, 10 Apr 2015 20:14:53 +0000 (16:14 -0400)]
Upgrade to Tycho 0.23.0
This fixes bug 453474.
Change-Id: Ib6e74caf59f0c23c6ce8e2f683963a1f6e1eafe9
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/45680
Reviewed-by: Hudson CI
Alexandre Montplaisir [Wed, 27 May 2015 00:09:40 +0000 (20:09 -0400)]
Add a new target to specify the API baseline
Eclipse 4.5 now offers specifying API baselines using target files.
This is much more simple than having to install and maintain a
separate Eclipse installation!
Add a new .target, under a baseline/ directory (to not confuse them
with "real" targets listing build dependencies) which we can use
for setting the API baseline.
Change-Id: Ie83d6ee09de00d102a735da99cd50118c5efd1f5
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/48703
Reviewed-by: Hudson CI
Patrick Tasse [Fri, 5 Jun 2015 19:54:05 +0000 (15:54 -0400)]
ctf: Fix location ratio handling in CtfTmfTrace
In getLocationRatio(), the provided location timestamp can be used
directly instead of requiring a context seek. Incidentally, the context
used in the current implementation was leaking as it was not disposed.
The total time range used for the ratio calculation should be based on
the trace start and end time (timestamp of first and last event). Using
the iterator range can result in Infinity ratio when the iterator has
only read a single event so far.
In seekEvent(double), the total time range used should also be based on
the trace start and end time. The trace getCurrentStartTime() and
getCurrentEndTime() methods use the packet start and end times which do
not necessarily match actual trace event timestamps.
Change-Id: Ic8bfcdebbd5c388a4048815d01124434e4c82ba6
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/49556
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Patrick Tasse [Fri, 5 Jun 2015 19:38:39 +0000 (15:38 -0400)]
ctf: Fix incorrect location in CtfTmfContext after seek
After seeking by timestamp, the context location should be set to the
exact timestamp of the event, not the specified timestamp.
After seeking to the start of the trace, the context location should be
set to the exact timestamp of the first event, not to 0. This was a
regression introduced when the CtfLocation was made final.
Change-Id: I5d34653aede7afd5b5fef1baead532a8b1640fa7
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/49555
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Patrick Tasse [Fri, 5 Jun 2015 17:24:06 +0000 (13:24 -0400)]
ctf: Fix CtfIterator current event and location after seek
If an iterator has equal current and previous location (like it does
after the current event has been read once), the seek will not update
the current event even if it does not match the seek location. Then the
current event and current location of the iterator can return arbitrary
values that do not correspond with the seek location.
This can happen if the iterator instance is recycled for a different
context, which only happens when the iterator manager is full due to 100
concurrent contexts for the same trace, which probably can only happen
if there is a context leak, as the iterator is removed from the iterator
manager when it is disposed.
Change-Id: Ifd67b2c866955f424e11172b8e6fc27a35ad676a
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/49554
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Patrick Tasse [Wed, 3 Jun 2015 20:21:42 +0000 (16:21 -0400)]
tmf: Add color preferences for event raw viewer highlight and selection
The color settings can be changed in Window > Preferences > General >
Appearance > Colors and Fonts > Tracing.
Descriptions are added for all the Tracing font and color preferences.
The default trace event table font is changed to the system font instead
of the dialog font, which more accurately reflects the widget default.
Change-Id: Ia422655c2acd4b15b7ee9b01e07e80bbce5ea900
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/49409
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Patrick Tasse [Mon, 8 Jun 2015 19:02:05 +0000 (15:02 -0400)]
tmf: Bug 469655: Virtual table column resize not working on Linux
Change-Id: I1186cb17a83a78210e85db06d763ceea7e8960cc
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/49696
Reviewed-by: Hudson CI
Reviewed-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Tested-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Matthew Khouzam [Wed, 27 May 2015 21:37:10 +0000 (17:37 -0400)]
tmf.ui: make columns hideable.
Change-Id: Ia23182dc74f05fac21570a718758e050b8881155
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48704
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Matthew Khouzam [Fri, 5 Jun 2015 20:15:34 +0000 (16:15 -0400)]
ctf: make StructDeclarationFlattener more NonNull
Change-Id: Ife73c0f117b2269b3a01a17d3931c0220e46de17
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/49558
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Marc-Andre Laperle [Fri, 5 Jun 2015 17:46:53 +0000 (13:46 -0400)]
Bump target sequence number to pick up fix in o.e.remote
See https://bugs.eclipse.org/bugs/show_bug.cgi?id=461520#c10
Change-Id: I5173d6d33229d3831c155335cd0606d3cf3ecbe6
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/49545
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Matthew Khouzam [Thu, 28 May 2015 16:45:06 +0000 (12:45 -0400)]
tmf.ui: make GzipFile call super.finalize()
Change-Id: I5cbffffb23a1d06134295bb17d5fa3fa5329d9f6
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48897
Reviewed-by: Hudson CI
Alexis Cabana-Loriaux [Tue, 5 May 2015 21:37:30 +0000 (17:37 -0400)]
tmf: delete unnecessary equals() and hashCode() methods for singleton
Change-Id: Idef63f478feced1ae3480c356f6f207c695b4f81
Signed-off-by: Alexis Cabana-Loriaux <alex021994@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47225
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Patrick Tasse [Tue, 2 Jun 2015 21:26:02 +0000 (17:26 -0400)]
swtbot: Fix ControlFlowViewTest
If the test host burps for a minimum of 400 ms between the 5th and the
6th click of the "Follow CPU Fwd" button, the test will fail because the
wait condition for the time range returns immediately since the 6th
selected event is a change of process that has the same timestamp as the
5th selected event and the listener notifier has timed out due to the
host delay, updating the trace manager with the selection time of the
5th selected event, and then the following assert on the tree selection
fails because the selected entry change event is still stuck in the new
listener notifier for another 400 ms.
A new condition is created to wait until the tree selection equals the
expected value, instead of using an assertion.
Additionally, the tests are updated to use the new click(int) with
modifier methods in SWTBot, allowing the test of range selection using
tool bar buttons while the SHIFT key is pressed.
Change-Id: Ic607d063b13248bd5ab91a87861ce3dad8a2b286
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/49259
Reviewed-by: Hudson CI
Reviewed-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Marc-Andre Laperle [Thu, 4 Jun 2015 04:39:08 +0000 (00:39 -0400)]
Upgrade jarsigner to final 1.1.2 release
Change-Id: I8b143dfed54739a250ef5da46851c8542d54aba9
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/49417
Reviewed-by: Hudson CI
Marc-Andre Laperle [Wed, 3 Jun 2015 02:38:32 +0000 (22:38 -0400)]
Fix file leak in Gzip support
Change-Id: Ie14143f5be809a8c7e54fc7bc5f7f639d6da4ece
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/49269
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Matthew Khouzam [Thu, 28 May 2015 16:47:57 +0000 (12:47 -0400)]
tmf.ui: GzipEntry remove magic numbers
Change-Id: I30db829944632f20923401f4f3e0724e4ca7c8e7
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48898
Reviewed-by: Hudson CI
Reviewed-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Matthew Khouzam [Thu, 28 May 2015 16:42:32 +0000 (12:42 -0400)]
tmf.ui: clarify exception handling in ImportTraceWizardPage
Also avoid an NPE that doesn't happen yet because of validation, not design.
Change-Id: I4a1e5918dea4343250150952974f9286c3ccb177
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48896
Reviewed-by: Hudson CI
Reviewed-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Matthew Khouzam [Fri, 29 May 2015 14:33:38 +0000 (10:33 -0400)]
ctf: add char position of parse errors in metadata
Change-Id: I927df5890e459c65f43570b6188d11787f3cd8f1
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48959
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Marc-Andre Laperle [Mon, 1 Jun 2015 17:35:23 +0000 (13:35 -0400)]
Use latest Orbit repo
See
http://dev.eclipse.org/mhonarc/lists/cross-project-issues-dev/msg11952.html
Change-Id: I0193cd2468bda3f6fc083d589ca412e3b49943e8
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/49123
Reviewed-by: Hudson CI
Marc-Andre Laperle [Mon, 1 Jun 2015 15:17:00 +0000 (11:17 -0400)]
Bump target sequence number to pick up new API changes from o.e.remote
Change-Id: Idda226b54e013663ca37b9806e4933ee008abfdb
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/49104
Reviewed-by: Hudson CI
Sebastien Lorrain [Thu, 7 May 2015 20:57:37 +0000 (16:57 -0400)]
lttng: Add Lttng27EventLayout
This new layout provides the VTIds and pid namespace Inodes on
"sched_process_fork" and "statedump_process_state" events.
Change-Id: If27a0585f38ef690eff8222a69207d9daecf2a41
Signed-off-by: Sebastien Lorrain <sebastien.lorrain01@gmail.com>
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/47474
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Patrick Tasse [Fri, 22 May 2015 21:24:43 +0000 (17:24 -0400)]
swtbot: Add Control Flow view tests
Tests involving shift-clicking a tool bar button are commented out until
this is supported by the SWTBot framework.
Change-Id: I82071d50828db282a0f5f8afa4b8974b9daf83c1
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/48502
Reviewed-by: Hudson CI
Bernd Hufmann [Thu, 28 May 2015 14:07:35 +0000 (10:07 -0400)]
doc: add time axis alignment to user guide
Change-Id: I4cb900dbc83d0adefea0b19865d877caf411834f
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48870
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Matthew Khouzam [Thu, 28 May 2015 12:19:52 +0000 (08:19 -0400)]
tmf.ui: make fields static
Change-Id: Ie87294e64410656d0afaada8705e786b7a8f5a94
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48856
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Bernd Hufmann [Wed, 27 May 2015 19:58:50 +0000 (15:58 -0400)]
tmf: bug 468542: Fix toggle of search/filter in table using the mouse
Change-Id: I5e1f849272c9ac89e9c15564f9f6a133562fdc1d
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48816
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Matthew Khouzam [Thu, 21 May 2015 22:11:29 +0000 (18:11 -0400)]
tmf.swtbot: add time axis alignment tests
Change-Id: I1ae6e460a2d59e07c955d9ccb98a961ffd53b0e2
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48547
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Bernd Hufmann [Wed, 27 May 2015 17:53:45 +0000 (13:53 -0400)]
doc: describe selection of time ranges using the keyboard and toolbar
Change-Id: Ifd5141ab284a66465b6c9151699623f373771424
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48811
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-by: Hudson CI
Bernd Hufmann [Fri, 22 May 2015 19:32:39 +0000 (15:32 -0400)]
tmf: Bug 468074: Fix selection bucket index calculation
Additional fixes:
- Fix HOME and END key to ignore bucket event counts
- Fix calculation of bucket timestamp to consider half bucket offset
- Fix bounding of mouse event x-coord to the bounds of the histogram
- Fix AIOOBException on mouse hover during drag outside of bounds
- Fix some mouse events not working with single timestamp trace
- Fix some mouse events not working when range has no events
- Fix tooltip bucket range string
Change-Id: Ie89dd6b50ab03e8eeeb7ec8e2addc449945af3e7
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/48496
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Matthew Khouzam [Thu, 21 May 2015 22:10:01 +0000 (18:10 -0400)]
tmf.swtbot: Introduce SWTBotSash
This allows testing time alignment, it shall be proposed to SWTBot to
be mainlined.
Change-Id: I64229211179a4438ca354497bacdda6af5972042
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48546
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Bernd Hufmann [Wed, 20 May 2015 19:28:05 +0000 (15:28 -0400)]
tmf: Bug 467751: Partial workaround for XY chart concurrency issue
This change will remove the usage of the TmfUIRefreshHandler which
delays the clearing of the chart.
However, it is still not thread-safe and it might fail. To fix it
correctly, the whole API of XY charts would have to looked at and
this won't be done for Mars.
Change-Id: Ib838864fd8fb7086391b44f0b3dbf0558617f5f2
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48320
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Tested-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Matthew Khouzam [Fri, 1 May 2015 01:43:12 +0000 (21:43 -0400)]
tmf.swtbot: add swtbot test for gzipped import
Change-Id: I743830381774801be33699076bb510e735529fef
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48271
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Marc-Andre Laperle [Tue, 14 Apr 2015 19:17:47 +0000 (15:17 -0400)]
tmf: Add support for importing Gzip (non-Tar)
Change-Id: I25271514449ecbfb7da2f56ee3036949b077ec07
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48552
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Bernd Hufmann [Tue, 26 May 2015 17:04:14 +0000 (13:04 -0400)]
control: Bug 468358: Display syscall names for LTTng 2.6 support
Change-Id: I55a0b49d9dfbb1947ff7f27bc92fd304d11dcdec
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48670
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Patrick Tasse [Wed, 20 May 2015 18:00:51 +0000 (14:00 -0400)]
ctf: Fix truncated packet header timestamps in synthetic trace generator
Change-Id: I813b6b8f08aca15fc944ab14d80b065b1d52e0d6
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/48315
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Patrick Tasse [Tue, 19 May 2015 21:12:05 +0000 (17:12 -0400)]
tmf: Fix IllegalStateException in HistogramDataModel
It should be allowed to have a last bucket set to 0 in the histogram
data model. This can happen if all trace events have the same timestamp.
The histogram time range is fixed to display even if the start and end
times are equal, as long as there is at least one event in the model.
The scaling is updated to make sure that these single-timestamp events
are spread over the whole width of the histogram. The scaled model will
have a bucket duration of 0 when it represents a single timestamp.
Change-Id: I5341aa6a158a3b4c1b3d4edee982ed67558e8a51
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/48224
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Matthew Khouzam [Mon, 18 May 2015 02:49:24 +0000 (22:49 -0400)]
ctf: Introduce LostEventDeclaration singleton
Move constants from EventDeclaration to IEventDeclaration.
this removes some package cycles but breaks the API.
Change-Id: If20f7927dd878f2719e84fec6656dd7f55bc72e7
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48040
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Matthew Khouzam [Mon, 18 May 2015 02:25:59 +0000 (22:25 -0400)]
ctf: internalize utils
Make utils internal. It makes no sense for this utils class to
be part of the API.
Change-Id: Ie4dfbfe3f807c04db3607c88819243550685c292
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48039
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Tested-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Matthew Khouzam [Fri, 24 Apr 2015 20:28:38 +0000 (16:28 -0400)]
ctf: Make Events use IComposite instead of Structured definitions
Baby steps towards a more general API.
Change-Id: I38af394a23b31ecbf8bad45005dce5d9042b9378
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/46462
Reviewed-by: Hudson CI
Matthew Khouzam [Mon, 18 May 2015 01:31:57 +0000 (21:31 -0400)]
ctf: do not append strings in StringBuilder.append() and avoid dead store
Clean up code during the process
Change-Id: If8017ce7bbec20a8a6542f2aaa30affa5f502059
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48034
Reviewed-by: Hudson CI
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Alexandre Montplaisir [Fri, 1 May 2015 17:25:14 +0000 (13:25 -0400)]
lttng: Avoid exposing internal class in shared tests
The VirtualMachineExperiment is internal, the shared test
utilities, which are made public, should not expose this
concept. Use a TmfExperiment, which is a public TMF concept
instead.
Change-Id: Id02891b77abf45ffc95e3c212ce62f759178e493
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/46961
Patrick Tasse [Fri, 15 May 2015 16:00:23 +0000 (12:00 -0400)]
tmf: Fix set focus on SWT Chart viewers
Views should give focus to the SWT chart control on setFocus().
The SWT chart control should give focus to the plot area on setFocus().
The SWT chart control should give focus to the plot area on mouse down.
Change-Id: Ic442d7c75c834c281de2c37d0c01363cd319bf27
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47980
Reviewed-by: Hudson CI
Matthew Khouzam [Tue, 19 May 2015 16:04:02 +0000 (12:04 -0400)]
ctf: fix windows regression
In windows, the bitbuffer reads the filechannel. This advances the
position. It needs to be flip()ed to reset reading. This problem will
be obvious when we do CI in windows.
Change-Id: Id1cbf581c993038c54d8aa6fd3a62a77e17f17e3
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48199
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Matthew Khouzam [Tue, 19 May 2015 16:02:44 +0000 (12:02 -0400)]
ctf: fix missing @since
Change-Id: Iaeb6ffc45b46382426e2987473e9351180c21190
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48198
Reviewed-by: Hudson CI
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Bernd Hufmann [Tue, 19 May 2015 16:14:25 +0000 (12:14 -0400)]
LTTng control: Comment out test for machine address in LTTng control tests
Apparently, the address string was changed on hudson from localhost
to hipp3.
Change-Id: I3bca52dfe570e67f96993cd40474568f0e6c2970
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/48200
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Alexandre Montplaisir [Thu, 14 May 2015 20:13:18 +0000 (16:13 -0400)]
tmf: Use OSString for the supplementary files folder property
On Windows, getLocationURI().getPath() returns a string that
starts with "/C:/...". This does not get parsed correctly by
utilities like java.nio.file.Path.
Using getLocation().toOSString() instead solves this problem.
Change-Id: I7c5d6d43cd21fd9c0021105884f61fb32bd133d5
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/47932
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Patrick Tasse [Fri, 15 May 2015 22:37:12 +0000 (18:37 -0400)]
tmf: Fix XY viewer first pixel value and NaN when pixel range is 0
Change-Id: Ib73197ded6885bec9f84b4fde37b094f7feaf14a
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/48004
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Matthew Khouzam [Mon, 24 Nov 2014 19:03:09 +0000 (14:03 -0500)]
ctf: fix performance issue with fighting optimisations
The struct flatener will effectively override the byte array optimisation,
this fix will not flatten byte arrays.
Change-Id: I74d76261cc178bd4ab3fac16f749495a481ebfd3
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/36954
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Tested-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Patrick Tasse [Fri, 10 Apr 2015 17:07:29 +0000 (13:07 -0400)]
doc: Minor corrections to Generic State System section
Change-Id: I9af4dd3c27f30f6e4ed478b7d6be9498f67674be
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/45676
Reviewed-by: Hudson CI
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Tested-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Alexandre Montplaisir [Mon, 18 May 2015 20:07:06 +0000 (16:07 -0400)]
lttng: Update for latest org.eclipse.remote API
IRemoteConnectionType#getCapabilities was removed, and replaced
with more direct capability-querying methods.
Change-Id: I5b14ab63320c2c0949d0d89a60fa7a2850f66bf3
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/48106
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Matthew Khouzam [Fri, 15 May 2015 19:51:52 +0000 (15:51 -0400)]
ctf: remove field list from constructor of StructDefinition
This makes no sense to have as structs have the field list internally.
Moreover this leads to more complicated and error prone struct initialization.
It also hides potential bugs in the tests. As highlighted in CTFEventDefinitionTest
Change-Id: I25bf18bf9be23fb2af17f52de9cf677bea1b4833
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47992
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Tested-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Bernd Hufmann [Fri, 15 May 2015 10:56:33 +0000 (06:56 -0400)]
tmf: Update mouse drag for xy charts to work with time aligmment
Change-Id: I6d94c4922bddae43ff9bcee3dfea118c7be446cf
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47957
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Bernd Hufmann [Fri, 15 May 2015 01:23:37 +0000 (21:23 -0400)]
tmf: Update calculation of offset and available width in XY chart
During window range updates the window start and end time of the
xy chart viewer used to be inconsistent with the corresponding
x-Series values. This lead to incorrect values when calculating
the point offset and available width for the time alignment during
the period of inconsistency. With this patch the offset and width
is calculated using the first and last time in the x-Series array.
Change-Id: I70eee0c08777c4b6797e2d6bbc41dd19fff05f64
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47944
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Alexandre Montplaisir [Fri, 15 May 2015 18:06:12 +0000 (14:06 -0400)]
lttng: Disable spuriously failing Partial State System tests
The partial state system is in very bad shape and not used at all.
Until some energy is put into improving its implementation and
testing, it should not be depended upon.
To make matters worse, one of its tests is failing randomly on
Hudson. Since it is not in a supported state at the moment, I
suggest disabling these tests until we improve the PSS.
Change-Id: I592598670b2f2a122c8f638b264502a48dae177c
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/47991
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Matthew Khouzam [Fri, 24 Apr 2015 20:32:34 +0000 (16:32 -0400)]
ctf: replace Defintion with IDefinition in IDefinitionScope
Change-Id: I06a73afd3a97633f4355828be0c10cf0dd7ad2e0
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/46461
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Tested-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Patrick Tasse [Thu, 14 May 2015 15:33:40 +0000 (11:33 -0400)]
tmf: Fix calculation of time axis offset
Calculate the time axis offset based on the control sizes instead of
using the sash weight ratios which can introduce small rounding errors.
Change-Id: Iff8deabd45981913e5209b9d2d4f33b922a5d6d4
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47923
Reviewed-by: Hudson CI
Patrick Tasse [Wed, 13 May 2015 19:44:13 +0000 (15:44 -0400)]
tmf: Fix calculation of sash weights in performAlign
This ensures that the sash width is taken into account when calculating
the sash weights when trying to align to a specific offset.
There can still be some drifting by 1 pixel, but this is caused by
integer trimming in the computations inside SashForm and SashLayout.
Change-Id: I742dc99e90e3eb4c9f95b1bac3da286f3187af3e
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47884
Reviewed-by: Hudson CI
Bernd Hufmann [Wed, 13 May 2015 19:58:13 +0000 (15:58 -0400)]
lttng: Make sure that time alignment signal is sent in CPU Usage view
Change-Id: I5efa35104ba3cc3112cc82c5afd4b50632deb883
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47886
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Bernd Hufmann [Wed, 13 May 2015 19:57:46 +0000 (15:57 -0400)]
tmf: Don't subtract of 1 when getting the pixel coordinate from xAxis
For small time ranges this subtraction caused invalid coordinates which
lead to invalid time alignment when zooming in to very small time range
Also, make sure that getPixelCoordinate is only called when Y-values
are abailable when calculating the the point area offset.
Change-Id: Iaa623a406a91ac94e681bf610169892ee8149555
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47885
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Bernd Hufmann [Wed, 13 May 2015 14:32:13 +0000 (10:32 -0400)]
tmf: Fix calculation of available alignment width in TimeGraphCombo
Before the fix the vertical scroll bar was not considered when
calculating the avalible alignment width.
To observe the impact of the incorrect aligment value open just
HistogramView and ControlFlowView for a kernel trace without the fix.
Then the right margin of the Histogram view is not correct.
Change-Id: Ia54e2c3f03fcc22def4706b778518353515c7897
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47852
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Bernd Hufmann [Wed, 13 May 2015 10:50:58 +0000 (06:50 -0400)]
tmf: Set window start and end time of TmfTimeViewer in one method.
Now both values have to be set at the same time instead of calling
2 set methods.
Change-Id: I8b76dfdf9d6d5c4d4e00b440b8ae493307e5bd7e
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47812
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Bernd Hufmann [Tue, 12 May 2015 18:57:54 +0000 (14:57 -0400)]
tmf: Set selection begin and end time of TmfTimeViewer in one method.
Now both values have to be set at the same time instead of calling
2 set methods.
Change-Id: I66d7e564609d83cba7f85bcad3649c39e34cc0eb
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47762
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Bernd Hufmann [Tue, 12 May 2015 18:44:20 +0000 (14:44 -0400)]
tmf: Set selection end time when opening XY chart views
Change-Id: I7b283f4492c00bc0a0fc6e716bd78aacf2751a4a
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47760
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Bernd Hufmann [Tue, 12 May 2015 18:31:58 +0000 (14:31 -0400)]
Update default weight for the SashForm in time-aligned views
Change-Id: Ie345adad7836116e38a18d4b08d6ab1071e298cc
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47759
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Matthew Khouzam [Wed, 29 Apr 2015 14:40:53 +0000 (10:40 -0400)]
tmf.core: Iterate over values or entries in a map iterator
Change-Id: Ia1ca10bc9bc0af48167417071585dd91c5bc2def
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/46790
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Matthew Khouzam [Wed, 29 Apr 2015 15:13:35 +0000 (11:13 -0400)]
Tmf.Ui: fix Multithreaded correctness - Call to static DateFormat
The problem has been very well explained here:
http://fahdshariff.blogspot.ca/2010/08/dateformat-with-multiple-threads.html
As this code may be used in multi-threaded environments, not making it thread
safe will result in sporadically mangled dates. This patch fixes it by
synchronizing each access with the list of all items. More performance would
be had by using a threadlocal scheme where setting the timezone resets the
structure, but the legibility of the class would greatly suffer.
Change-Id: If8e9b118b3db15a2a0c088d4ebb2fa7c20839885
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/46792
Reviewed-by: Hudson CI
Alexis Cabana-Loriaux [Wed, 6 May 2015 17:00:43 +0000 (13:00 -0400)]
lttng: Remove unnecessary String object creation
Change-Id: I984c3218ebe2cff37b5596f53c2bb2d642f1bfd4
Signed-off-by: Alexis Cabana-Loriaux <alex021994@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47353
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Alexis Cabana-Loriaux [Wed, 6 May 2015 14:55:58 +0000 (10:55 -0400)]
gdbtrace: Change instantiation of Integer argument
Change-Id: Ib0bf057a4fd858271da1ea332e7ce94c3df72493
Signed-off-by: Alexis Cabana-Loriaux <alex021994@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47318
Reviewed-by: Hudson CI
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
France Lapointe Nguyen [Thu, 7 May 2015 22:25:18 +0000 (18:25 -0400)]
tmf: Remove nullcheck before an instanceof
Change-Id: Ia1f5b9d7c77046bb6baa7c8950dbe8acd000ab5e
Signed-off-by: France Lapointe Nguyen <francelap@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47504
Reviewed-by: Hudson CI
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
France Lapointe Nguyen [Fri, 8 May 2015 13:41:57 +0000 (09:41 -0400)]
Use equals and equalsNullable method instead of ==
Change-Id: I3dcc6c0a60f88b0ffcf92dd6f3d17a831403dbb8
Signed-off-by: France Lapointe Nguyen <francelap@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47535
Reviewed-by: Hudson CI
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
France Lapointe Nguyen [Tue, 5 May 2015 21:46:51 +0000 (17:46 -0400)]
pcap: Replace a null-check by a NonNullUtils function in ConversionHelper
Change-Id: I41aaaa5bdcd7cbe849dcfc096350c91663763ac4
Signed-off-by: France Lapointe Nguyen <francelap@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47226
Reviewed-by: Hudson CI
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
France Lapointe Nguyen [Tue, 5 May 2015 21:55:06 +0000 (17:55 -0400)]
lttng: Remove redundant null check by marking generateSessionConfig() @NonNull
Change-Id: I96e6536b44d45c0bf02fb675f14c86bfd016644e
Signed-off-by: France Lapointe Nguyen <francelap@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47227
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
France Lapointe Nguyen [Fri, 8 May 2015 21:42:06 +0000 (17:42 -0400)]
tmf: Remove repeated conditional test
Change-Id: Ia77d9ed5463e790a4526625e8f111946c470d891
Signed-off-by: France Lapointe Nguyen <francelap@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47537
Reviewed-by: Hudson CI
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Marc-Andre Laperle [Mon, 11 May 2015 20:04:17 +0000 (16:04 -0400)]
Bump target sequence number to pick up Mars M7
Change-Id: Iab76273eb5573cac436da167f9b404b1b6472a0d
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47663
Reviewed-by: Hudson CI
Bernd Hufmann [Tue, 5 May 2015 13:12:56 +0000 (09:12 -0400)]
tmf: Adjust xAxis range after mouse drag operation in XY chart viewer
This will provide correct values for x-Axis alignment.
Change-Id: Ic98423582b6c361f1fefc79e837dc919aaaad038
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47178
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Bernd Hufmann [Mon, 4 May 2015 15:24:56 +0000 (11:24 -0400)]
tmf: Align the time-axis for time range histogram
Change-Id: Ie1dfb34e9ffdbe881bb477622398dce44546529d
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47077
Reviewed-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Tested-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-by: Hudson CI
Patrick Tasse [Wed, 6 May 2015 21:02:47 +0000 (17:02 -0400)]
tmf: Allow shift key to extend selection in time graph
- Extend the selection range when shift key is pressed while pressing
left or right keys.
- Extend the selection range when shift key is pressed while running the
next event, previous event, follow arrow fwd, follow arrow bwd actions.
- Update status line when the above actions modify the selection.
- Make sure the selection end time is visible when modifying the
selection range.
- Show status line when time graph control has focus with mouse outside
of the control bounds, but without displaying the cursor time.
- Highlight the selected state at the selection end time instead of the
selection start time.
- Remove the margin factor that made 'ensure visible' change the time
range when the selection was near the left or right margin.
Change-Id: Iee1dbbbc56e052de1a48bc638355e0c7dc126c2a
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47381
Reviewed-by: Hudson CI
Patrick Tasse [Wed, 6 May 2015 18:06:17 +0000 (14:06 -0400)]
tmf: Allow negative time range selection
This patch allows the selection end time to be lower than the selection
start time, better representing the user selection.
It will help to correctly update the end boundary using atomic
operations (keyboard or button) that extend a selection to the left of
the selection start.
The status line message delta is updated to allow a negative value.
Change-Id: I5228441cb049487783d4b0fdcba7ef766077677f
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47380
Matthew Khouzam [Wed, 22 Apr 2015 17:05:43 +0000 (13:05 -0400)]
tmf.ui: add percent of selection to timechart view
This allows us to know how much time is being used by one entry in a timechart.
Applies to Control flow view, resource view and the call stack view
Change-Id: If7052553473ca53929aafaba7fc5831883e4e087
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/46271
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Bernd Hufmann [Mon, 4 May 2015 14:55:06 +0000 (10:55 -0400)]
tmf: Add sash for time range histogram and time controls
Change-Id: I127751cc998e56cd47afae7922099e2861028e61
Signed-off-by: Bernd Hufmann <Bernd.Hufmann@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47075
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Matthew Khouzam [Mon, 27 Apr 2015 20:44:11 +0000 (16:44 -0400)]
tmf.ui: make histogram use entire range of plot area
This feature will help view alignment but has an issue with beat
aliasing due to sampling periods not being harmonics.
Change-Id: Iff033f90f68e0614a9f56a402400b9385108107d
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/46593
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Marc-Andre Laperle [Thu, 7 May 2015 22:37:10 +0000 (18:37 -0400)]
tmf: Fix time scale not visible at first in Control Flow view (GTK3)
Bug 466791
Change-Id: Ide2431eb9a48f5430e04f53bd3d76c28c03577d3
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47505
Reviewed-by: Hudson CI
Alexandre Montplaisir [Fri, 8 May 2015 19:59:48 +0000 (15:59 -0400)]
ctf: Provide a Maven property to specify a ctf-testsuite commit to use
Instead of automatically pulling all changes from ctf-testsuite,
which may break our builds unexpectedly, we'll define a commit
to use in the plugin's pom.xml.
We can regularly update this pointer to pull in newer versions
of the test suite.
The property can also be overridden on the command-line, for
example using:
mvn clean verify -DctfTestSuiteCommit=master
will use ctf-testsuite's master branch.
Change-Id: I06b8e11f12fec16d9c011f0f2a80b083fcadd8de
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/47554
Reviewed-by: Hudson CI
Reviewed-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Tested-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
France Lapointe Nguyen [Thu, 7 May 2015 21:00:11 +0000 (17:00 -0400)]
tmf: Synchronize initialization methods of static fields
Change-Id: Iedc625fb00e3f9745c03f3bea233c12bc5b9ca26
Signed-off-by: France Lapointe Nguyen <francelap@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47355
Reviewed-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Marc-Andre Laperle [Thu, 7 May 2015 19:32:50 +0000 (15:32 -0400)]
tmf: Fix bad width value when timegraph views are smaller than time axis offset
Change-Id: I2e2a4361e0ce1fb1857e4f0be7e781c56ead438c
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47485
Reviewed-by: Hudson CI
Marc-Andre Laperle [Wed, 6 May 2015 21:28:36 +0000 (17:28 -0400)]
tmf: Fix regression of XML analysis combined with custom text parser not working
bug: 466641
Change-Id: I9c6ea6014e6f25f73e52ed182b6abc2ab2394a17
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47382
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Tested-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Matthew Khouzam [Thu, 7 May 2015 21:33:38 +0000 (17:33 -0400)]
ctf: Allow mixing unspecified stream IDs with ID 0
If an event does not specify a stream ID, we will assign it to
stream with ID 0. This means they will be put in the same stream
as the events specifically defining stream 0.
A corrolary is that if a stream does not specify it's id, it too
is assigned to 0.
However, the trace must not define any stream IDs other than 0.
This behaviour matches the one of Babeltrace.
Change-Id: I0628acaa8566dde0a3659fe56d5a8e903c6feb26
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/45687
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
France Lapointe Nguyen [Thu, 7 May 2015 18:04:09 +0000 (14:04 -0400)]
tmf: Remove 2 redundant nullcheck in TmfEventsTable by using local copy
Change-Id: I5e0fb8f084afa7ef07f573c877fb2b8b24af0493
Signed-off-by: France Lapointe Nguyen <francelap@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47224
Reviewed-by: Hudson CI
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Patrick Tasse [Wed, 6 May 2015 17:43:30 +0000 (13:43 -0400)]
tmf: Fix status line not updating if trace editor is reused
The status line showing the delta of the selection range was not
updating if the trace editor was opened using a bookmark or was restored
following a restart of Eclipse.
Change-Id: I826b21209cfa329d5df99f077e9f3342950eae74
Signed-off-by: Patrick Tasse <patrick.tasse@gmail.com>
Reviewed-on: https://git.eclipse.org/r/47379
Reviewed-by: Hudson CI
Reviewed-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Matthew Khouzam [Thu, 7 May 2015 01:46:21 +0000 (21:46 -0400)]
histogram: reflow comments
Change-Id: I79e439e5bb03c4e35d3985b20a810f50714922e7
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47399
Reviewed-by: Hudson CI
Reviewed-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Matthew Khouzam [Thu, 7 May 2015 14:16:02 +0000 (10:16 -0400)]
tmf.ui: reflow events table
Change-Id: Ia36fd20caa4f1f38d34de2299f1a58dbe537b639
Signed-off-by: Matthew Khouzam <matthew.khouzam@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/47448
Reviewed-by: Patrick Tasse <patrick.tasse@gmail.com>
Tested-by: Patrick Tasse <patrick.tasse@gmail.com>
Marc-Andre Laperle [Wed, 29 Apr 2015 20:40:57 +0000 (16:40 -0400)]
tmf: Align the time-axis for MemoryUsageView, XmlXYView (TmfChartViews)
Change-Id: I22480ae2d4adc3b223a68dd9a859b2a3fb2b32c8
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/46819
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Marc-Andre Laperle [Wed, 29 Apr 2015 18:29:01 +0000 (14:29 -0400)]
tmf: Align the time-axis for the CPU usage view
Change-Id: I4eef728afc1092ee0fe9b340af97bf4345aa2d2b
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/46811
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Marc-Andre Laperle [Wed, 29 Apr 2015 18:28:27 +0000 (14:28 -0400)]
tmf: Align the time-axis of time chart views
This patch introduces a logic for time-axis alignment across view. The
time chart based views use this new mechanism as a first implementation.
Change-Id: I31a05b686c8028b8f3e0643afa7aa540c9165cdf
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Reviewed-on: https://git.eclipse.org/r/46810
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Alexandre Montplaisir [Thu, 23 Apr 2015 19:25:06 +0000 (15:25 -0400)]
lttng: Remove capital letter in package name
Rename lttng2.control.core.relayd.lttngviewerCommands to
.commands. Package names should not contain capital letters.
Change-Id: I250f9a72b2ea966e0c3e3e6568d87cab5a77dc9e
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/46378
Reviewed-by: Hudson CI
Reviewed-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Tested-by: Bernd Hufmann <bernd.hufmann@ericsson.com>
Alexandre Montplaisir [Fri, 1 May 2015 22:02:23 +0000 (18:02 -0400)]
Remove unneed null checks
A recent JDT update seems to have extended the null flow analysis
to consider the case where assigning an Integer from an int makes
it effectively non-null.
This points out that we were doing some redundant null checks.
Change-Id: Ie222b519f02e45584ae4f47381025fd28a8f6423
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/46967
Reviewed-by: Hudson CI
Alexandre Montplaisir [Wed, 6 May 2015 19:34:54 +0000 (15:34 -0400)]
Remove the Eclipse 4.4 target file
A recent change in org.eclipse.remote.core requires Eclipse 4.5.
As such, Trace Compass now also requires 4.5.
Change-Id: I8a71bc98123a7137a75cfcc4f20a8dfd21fde4a1
Signed-off-by: Alexandre Montplaisir <alexmonthy@voxpopuli.im>
Reviewed-on: https://git.eclipse.org/r/47369
Reviewed-by: Hudson CI
This page took 0.044889 seconds and 5 git commands to generate.