Jason Gerecke [Tue, 22 Oct 2013 22:35:30 +0000 (15:35 -0700)]
Input: wacom - add support for ISDv4 0x10E sensor
Used in the Fujitsu T732
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Jason Gerecke [Wed, 16 Oct 2013 06:46:34 +0000 (23:46 -0700)]
Input: wacom - add support for ISDv4 0x10F sensor
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Tested-by: Filip Zarnecki <Filip.Zarnecki@fuw.edu.pl>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Bastien Nocera [Wed, 16 Oct 2013 06:33:00 +0000 (23:33 -0700)]
Input: wacom - export battery scope
This will stop UPower from detecting the tablet as a power supply,
and using its battery status to hibernate or switch off the machine.
https://bugs.freedesktop.org/show_bug.cgi?id=70321
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tim Gardner [Thu, 19 Sep 2013 21:24:04 +0000 (14:24 -0700)]
Input: cm109 - convert high volume dev_err() to dev_err_ratelimited()
BugLink: http://bugs.launchpad.net/bugs/1222850
This input device can get into a state that produces a high
volume of device status errors. Attempt to throttle these
error messages such that the kernel log is not flooded.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David Herrmann [Sun, 6 Oct 2013 08:15:08 +0000 (01:15 -0700)]
Input: move name/timer init to input_alloc_dev()
We want to allow drivers to call input_event() at any time after the
device got allocated. This means input_event() and input_register_device()
must be allowed to run in parallel.
The only conflicting calls in input_register_device() are init_timer() and
dev_set_name(). Both can safely be moved to device allocation and we're
good to go.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Andrey Moiseev [Mon, 16 Sep 2013 22:17:31 +0000 (15:17 -0700)]
Input: i8042 - i8042_flush fix for a full 8042 buffer
When 8042 internal data buffer is full, the driver
erroneously decides that the controller is not present.
i8042_flush returns the number of flushed bytes, which is
in 0 - I8042_BUFFER_SIZE range inclusive. Therefore, i8042_flush
has no way to indicate an error. Moreover i8042_controller_check
takes initially full buffer (i8042_flush returned
I8042_BUFFER_SIZE) as a sign of absence of the controller.
Let's change i8042 to return success/error instead and make sure
we do not return error prematurely.
Signed-off-by: Andrey Moiseev <o2g.org.ru@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Mike Dunn [Wed, 18 Sep 2013 15:07:41 +0000 (08:07 -0700)]
Input: pxa27x_keypad - fix NULL pointer dereference
A NULL pointer dereference exception occurs in the driver probe function when
device tree is used. The pdata pointer will be NULL in this case, but the code
dereferences it in all cases. When device tree is used, a platform data
structure is allocated and initialized, and in all cases this pointer is copied
to the driver's private data, so the variable being tested should be accessed
through the driver's private data structure.
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David Herrmann [Sat, 7 Sep 2013 19:23:05 +0000 (12:23 -0700)]
Input: evdev - add EVIOCREVOKE ioctl
If we have multiple sessions on a system, we normally don't want
background sessions to read input events. Otherwise, it could capture
passwords and more entered by the user on the foreground session. This is
a real world problem as the recent XMir development showed:
http://mjg59.dreamwidth.org/27327.html
We currently rely on sessions to release input devices when being
deactivated. This relies on trust across sessions. But that's not given on
usual systems. We therefore need a way to control which processes have
access to input devices.
With VTs the kernel simply routed them through the active /dev/ttyX. This
is not possible with evdev devices, though. Moreover, we want to avoid
routing input-devices through some dispatcher-daemon in userspace (which
would add some latency).
This patch introduces EVIOCREVOKE. If called on an evdev fd, this revokes
device-access irrecoverably for that *single* open-file. Hence, once you
call EVIOCREVOKE on any dup()ed fd, all fds for that open-file will be
rather useless now (but still valid compared to close()!). This allows us
to pass fds directly to session-processes from a trusted source. The
source keeps a dup()ed fd and revokes access once the session-process is
no longer active.
Compared to the EVIOCMUTE proposal, we can avoid the CAP_SYS_ADMIN
restriction now as there is no way to revive the fd again. Hence, a user
is free to call EVIOCREVOKE themself to kill the fd.
Additionally, this ioctl allows multi-layer access-control (again compared
to EVIOCMUTE which was limited to one layer via CAP_SYS_ADMIN). A middle
layer can simply request a new open-file from the layer above and pass it
to the layer below. Now each layer can call EVIOCREVOKE on the fds to
revoke access for all layers below, at the expense of one fd per layer.
There's already ongoing experimental user-space work which demonstrates
how it can be used:
http://lists.freedesktop.org/archives/systemd-devel/2013-August/012897.html
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Sat, 7 Sep 2013 03:23:44 +0000 (20:23 -0700)]
Merge branch 'next' into for-linus
Merge first round of changes for 3.12 merge window.
David Herrmann [Thu, 29 Aug 2013 16:35:11 +0000 (09:35 -0700)]
Input: add SYN_MAX and SYN_CNT constants
SYN_* events are special and not enabled via set_bit() for devices. Hence,
they haven't been really needed, yet. However, user-space can still make
great use of that for int->string debugging helpers or alike.
Also, I haven't seen any reason not to define these, so here they are.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fabio Estevam [Thu, 29 Aug 2013 16:13:35 +0000 (09:13 -0700)]
Input: max11801_ts - convert to devm
Converting to devm functions can make the code smaller and cleaner.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fabio Estevam [Thu, 29 Aug 2013 16:12:08 +0000 (09:12 -0700)]
Input: egalax-ts - fix typo and improve text
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Mischa Jonker [Thu, 29 Aug 2013 16:29:40 +0000 (09:29 -0700)]
Input: i8042 - disable the driver on ARC platforms
It causes crashes when enabled, and we don't have such a peripheral
anyway on ARC platforms.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Javier Martinez Canillas [Thu, 29 Aug 2013 15:43:58 +0000 (08:43 -0700)]
Input: MAINTAINERS - change maintainer for cyttsp driver
I haven't had time to work on this driver for a long time and
Ferruh has been doing a great job making it more generic,
adding support for new hardware and providing bug fixes.
So, let's make MAINTAINERS reflect reality and add him as the
cyttsp maintainer instead of me.
Also, since Ferruh works for Cypress, we may change the driver
status from Maintained to Supported.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Ferruh Yigit <fery@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Geert Uytterhoeven [Thu, 29 Aug 2013 15:40:42 +0000 (08:40 -0700)]
Input: cyttsp4 - kill 'defined but not used' compiler warnings
If both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME are unset:
drivers/input/touchscreen/cyttsp4_core.c:1556: warning: ‘cyttsp4_core_sleep’ defined but not used
drivers/input/touchscreen/cyttsp4_core.c:1634: warning: ‘cyttsp4_core_wake’ defined but not used
Move cyttsp4_core_sleep(), cyttsp4_core_wake(), and cyttsp4_core_wake_()
(which is called from cyttsp4_core_wake() only) inside the existing section
protected by #if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Andrey Moiseev [Mon, 26 Aug 2013 05:51:15 +0000 (22:51 -0700)]
Input: add driver for slidebar on Lenovo IdeaPad laptops
This driver adds support for slidebars found on some Lenovo IdeaPad
laptops (the slidebars work with SlideNav/Desktop Navigator under
Windows).
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16004
Registers 'IdeaPad Slidebar' input device and
/sys/devices/platform/ideapad_slidebar/slidebar_mode
for switching slidebar's modes.
Now works on:
IdeaPad Y550, Y550P.
May work on (testing and adding new models is needed):
Ideapad Y560, Y460, Y450, Y650,
and, probably, some others.
Signed-off-by: Andrey Moiseev <o2g.org.ru@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Mag [Mon, 26 Aug 2013 07:22:01 +0000 (00:22 -0700)]
Input: xpad - add signature for Razer Onza Classic Edition
Signed-off-by: Nol "Mag" Archinova <magissia@magissia.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Illia Smyrnov [Mon, 26 Aug 2013 06:32:45 +0000 (23:32 -0700)]
Input: omap-keypad - set up irq type from DT
OMAP4 is DT only, so read the keypad IRQ type from DT instead hard-coding
it in the driver.
Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Illia Smyrnov [Mon, 26 Aug 2013 06:29:30 +0000 (23:29 -0700)]
Input: omap-keypad - enable wakeup capability for keypad.
Enable/disable IRQ wake in suspend/resume handlers
to make the keypad wakeup capable.
Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Illia Smyrnov [Mon, 26 Aug 2013 06:26:16 +0000 (23:26 -0700)]
Input: omap-keypad - clear interrupts on open
According to TRM, the recommended way for keyboard controller
initialization is clear the interrupt-status register, then set up
certain keyboard events for generating an interrupt request and
set up expected source of wake-up event that generates a wake-up
request.
Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Illia Smyrnov [Mon, 26 Aug 2013 06:25:50 +0000 (23:25 -0700)]
Input: omap-keypad - convert to threaded IRQ
Convert to use threaded IRQ.
Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Illia Smyrnov [Mon, 26 Aug 2013 06:25:18 +0000 (23:25 -0700)]
Input: omap-keypad - use bitfiled instead of hardcoded values
Use bitfiled instead of hardcoded values to set KBD_CTRL, use BIT macro,
remove unused defines.
Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Wei Yongjun [Mon, 26 Aug 2013 06:24:35 +0000 (23:24 -0700)]
Input: cyttsp4 - remove useless NULL test from cyttsp4_watchdog_timer()
Remove useless NULL test from cyttsp4_watchdog_timer().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Ferruh Yigit <fery@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Matteo Delfino [Thu, 15 Aug 2013 07:09:41 +0000 (00:09 -0700)]
Input: elantech - fix packet check for v3 and v4 hardware
The signatures of v3 and v4 packets change depending on the value of a
hardware flag called 'crc_enabled'. The packet type detection must change
accordingly.
This patch also restores a consistency check for v4 packets inadvertently
removed by commit:
9eebed7de660c0b5ab129a9de4f89d20b60de68c
Input: elantech - fix for newer hardware versions (v7)
A note about the naming convention: v3 hardware is associated with IC body
v5 while v4 hardware is associated with IC body v6 and v7. The above commit
refers to IC body v7, not to v7 hardware.
Tested on Samsung NP730U3E (fw = 0x675f05, ICv7, crc_enabled = 1)
Tested-by: Giovanni Frigione <gio.frigione@gmail.com>
Signed-off-by: Matteo Delfino <kendatsuba@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ping Cheng [Wed, 21 Aug 2013 16:14:49 +0000 (09:14 -0700)]
Input: wacom - add support for 0x300 and 0x301
Tested-by: Arjuna Rao Chavala <arjunaraoc@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Wei Yongjun [Sat, 24 Aug 2013 23:41:56 +0000 (16:41 -0700)]
Input: wacom - fix error return code in wacom_probe()
Fix to return a negative error code from the urb submit error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Wei Yongjun [Sat, 24 Aug 2013 23:39:26 +0000 (16:39 -0700)]
Input: as5011 - fix error return code in as5011_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Julia Lawall [Thu, 15 Aug 2013 07:08:17 +0000 (00:08 -0700)]
Input: keyboard, serio - simplify use of devm_ioremap_resource
Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.
Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more clear.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@
- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Julia Lawall [Thu, 15 Aug 2013 07:07:43 +0000 (00:07 -0700)]
Input: tegra-kbc - simplify use of devm_ioremap_resource
Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.
Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more clear.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@
- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sachin Kamat [Thu, 15 Aug 2013 06:50:48 +0000 (23:50 -0700)]
Input: htcpen - fix incorrect placement of __initdata
__initdata should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Pau Oliva Fora <pau@eslack.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Bo Shen [Tue, 13 Aug 2013 16:46:40 +0000 (09:46 -0700)]
Input: qt1070 - add power management ops
Add power management ops for qt1070, it may be a wakeup source.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stefan Lippers-Hollmann [Tue, 13 Aug 2013 05:45:58 +0000 (22:45 -0700)]
Input: wistron_btns - add MODULE_DEVICE_TABLE
This allows the wistron_btns module to be autoloaded on boot, its functionality
is required to support the hardware rfkill switches on most of the supported
notebooks, in order to unblock the hard blocked rfkill state for wireless and
bluetooth devices.
Tested on a Medion MD96500:
alias: dmi*:svn*MEDIONPC*:pn*WIM2040*:
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stefan Lippers-Hollmann [Tue, 13 Aug 2013 05:45:38 +0000 (22:45 -0700)]
Input: wistron_btns - mark the Medion MD96500 keymap as tested
DMI: MEDIONPC WIM 2040/WIM 2040, BIOS R01-A0O 11/04/2005
wistron_btns: BIOS signature found at
c00f6b00, entry point
000FDD50
input: Wistron laptop buttons as /devices/platform/wistron-bios/input/input5
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stefan Lippers-Hollmann [Tue, 13 Aug 2013 05:45:23 +0000 (22:45 -0700)]
Input: wistron_btns - drop bogus MODULE_VERSION macro
MODULE_VERSION is pointless for an in-kernel module and git log confirms that
it has never been actually maintained as well (bumped a single time, despite
quite major feature additions later on, which haven't been reflected in
MODULE_VERSION).
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sachin Kamat [Mon, 12 Aug 2013 18:05:58 +0000 (11:05 -0700)]
Input: synaptics - fix incorrect placement of __initconst
__initconst should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sachin Kamat [Mon, 12 Aug 2013 18:05:43 +0000 (11:05 -0700)]
Input: lifebook - fix incorrect placement of __initconst
__initconst should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sachin Kamat [Mon, 12 Aug 2013 18:05:18 +0000 (11:05 -0700)]
Input: wistron_btns - fix incorrect placement of __initconst
__initconst should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Jingoo Han [Mon, 5 Aug 2013 16:13:27 +0000 (09:13 -0700)]
Input: joysticks - use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Jingoo Han [Mon, 5 Aug 2013 16:06:42 +0000 (09:06 -0700)]
Input: pwm-beeper - add CONFIG_PM_SLEEP to suspend/resume
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the build
warnings when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used
when the CONFIG_PM_SLEEP is enabled.
drivers/input/misc/pwm-beeper.c:147:12: warning: 'pwm_beeper_suspend' defined but not used [-Wunused-function]
drivers/input/misc/pwm-beeper.c:157:12: warning: 'pwm_beeper_resume' defined but not used [-Wunused-function]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Jingoo Han [Mon, 5 Aug 2013 16:06:00 +0000 (09:06 -0700)]
Input: eeti_ts - add CONFIG_PM_SLEEP to suspend/resume
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the build
warnings when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used
when the CONFIG_PM_SLEEP is enabled.
drivers/input/touchscreen/eeti_ts.c:268:12: warning: 'eeti_ts_suspend' defined but not used [-Wunused-function]
drivers/input/touchscreen/eeti_ts.c:287:12: warning: 'eeti_ts_resume' defined but not used [-Wunused-function]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Jingoo Han [Mon, 5 Aug 2013 16:04:23 +0000 (09:04 -0700)]
Input: cy8ctmg110_ts - add CONFIG_PM_SLEEP to suspend/resume
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the build
warnings when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used
when the CONFIG_PM_SLEEP is enabled.
drivers/input/touchscreen/cy8ctmg110_ts.c:295:12: warning: 'cy8ctmg110_suspend' defined but not used [-Wunused-function]
drivers/input/touchscreen/cy8ctmg110_ts.c:309:12: warning: 'cy8ctmg110_resume' defined but not used [-Wunused-function]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Jingoo Han [Mon, 5 Aug 2013 16:04:18 +0000 (09:04 -0700)]
Input: max7359 - add CONFIG_PM_SLEEP to suspend/resume
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the build
warnings when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used
when the CONFIG_PM_SLEEP is enabled.
drivers/input/keyboard/max7359_keypad.c:275:12: warning: 'max7359_suspend' defined but not used [-Wunused-function]
drivers/input/keyboard/max7359_keypad.c:287:12: warning: 'max7359_resume' defined but not used [-Wunused-function]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Mathieu J. Poirier [Sun, 4 Aug 2013 00:22:08 +0000 (17:22 -0700)]
Input: sysrq - DT binding for key sequence
Adding a simple device tree binding for the specification of key
sequences. Definition of the keys found in the sequence are located in
'include/uapi/linux/input.h'.
For the sysrq driver, holding the sequence of keys down for a specific
amount of time will reset the system.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ping Cheng [Sun, 28 Jul 2013 07:38:54 +0000 (00:38 -0700)]
Input: wacom - integrate resolution calculation
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Peter Ujfalusi [Sat, 13 Jul 2013 20:36:19 +0000 (13:36 -0700)]
Input: twl6040-vibra - remove support for legacy (pdata) mode
TWL6040 is used only with OMAP4/5 SoCs and they can only boot in in DT mode.
The support for pdata/legacy boot can be removed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Sat, 13 Jul 2013 06:34:25 +0000 (23:34 -0700)]
Merge branch 'next' into for-linus
Bring in second round of updates for 3.11.
Daniel Tang [Sun, 7 Jul 2013 04:53:26 +0000 (21:53 -0700)]
Input: nspire-keypad - replace magic offset with define
Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Matteo Delfino [Sun, 7 Jul 2013 04:52:26 +0000 (21:52 -0700)]
Input: elantech - fix for newer hardware versions (v7)
* Fix version recognition in elantech_set_properties
The new hardware reports itself as v7 but the packets'
structure is unaltered.
* Fix packet type recognition in elantech_packet_check_v4
The bitmask used for v6 is too wide, only the last three bits of
the third byte in a packet (packet[3] & 0x03) are actually used to
distinguish between packet types.
Starting from v7, additional information (to be interpreted) is
stored in the remaining bits (packets[3] & 0x1c).
In addition, the value stored in (packet[0] & 0x0c) is no longer
a constant but contains additional information yet to be deciphered.
This change should be backwards compatible with v6 hardware.
Additional-author: Giovanni Frigione <gio.frigione@gmail.com>
Signed-off-by: Matteo Delfino <kendatsuba@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ferruh Yigit [Thu, 4 Jul 2013 21:02:57 +0000 (14:02 -0700)]
Input: cyttsp4 - use 16bit address for I2C/SPI communication
In TSG4, register map is 512bytes long and to access all of it,
one bit from address byte is used (which bit to use differs for
I2C and SPI);
Since common code used for TSG3 and TSG4 for I2C, this parameter
wrongly used as u8. TSG3 does not access beyond 255 bytes
but TSG4 may.
Tested-on:TMA3XX DVB && TMA4XX DVB
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ferruh Yigit [Thu, 4 Jul 2013 21:02:45 +0000 (14:02 -0700)]
Input: cyttsp4 - kfree xfer_buf on error path in probe()
If probe() fails after cd->xfer_buf allocated, it will not freed.
Added kfree(cd->xfer_buf) with and error label.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Wed, 3 Jul 2013 06:08:18 +0000 (23:08 -0700)]
Input: tps6507x-ts - select INPUT_POLLDEV
Since the driver was converted to polled device infrastructure we need
to make sure it is enabled.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Daniel Mack [Fri, 28 Jun 2013 06:42:17 +0000 (23:42 -0700)]
Input: ads7846 - add device tree bindings
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Fri, 28 Jun 2013 06:29:25 +0000 (23:29 -0700)]
Input: ads7846 - make sure we do not change platform data
Let's declare platform data a const pointer so that we don't accitentally
change it. Also fetch it with dev_get_platdata().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Mon, 1 Jul 2013 18:47:51 +0000 (11:47 -0700)]
Input: bcm5974 - add support for the 2013 MacBook Air
The June 2013 Macbook Air (13'') has a new trackpad protocol; four new
values are inserted in the header, and the mode switch is no longer
needed. This patch adds support for the new devices.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Mon, 1 Jul 2013 18:46:27 +0000 (11:46 -0700)]
HID: apple: Add support for the 2013 Macbook Air
This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8
(0x0291, 0x0292, 0x0293). The touchpad is handled in a separate
bcm5974 patch, as usual.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dan Carpenter [Wed, 3 Jul 2013 03:32:58 +0000 (20:32 -0700)]
Input: cyttsp4 - leak on error path in probe()
We leak "cd" if the cd->xfer_buf allocation fails. It was weird to
"goto error_gpio_irq" so I changed the label name. (Label names should
reflect the label location not the goto location otherwise you get an
"all roads lead to Rome problem").
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dan Carpenter [Wed, 3 Jul 2013 03:32:53 +0000 (20:32 -0700)]
Input: cyttsp4 - silence NULL dereference warning
If "cd" were NULL then we would dereference it when we print the error
message. Fortunately enough, it can't ever be NULL so we can remove
those lines.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dan Carpenter [Wed, 3 Jul 2013 03:32:39 +0000 (20:32 -0700)]
Input: cyttsp4 - silence shift wrap warning
"*max" is a size_t (long) type but "1" is an int so static checkers
complain that the shift could wrap.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Tue, 2 Jul 2013 16:01:31 +0000 (09:01 -0700)]
Merge branch 'next' into for-linus
Prepare first set of updates for 3.11 merge window.
Dmitry Torokhov [Mon, 15 Apr 2013 18:11:00 +0000 (11:11 -0700)]
Input: tps6507x-ts - convert to polled input device infrastructure
There is no need to roll our own polling scheme when we already have
one implemented by the core.
Tested-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Manish Badarkhe [Mon, 1 Jul 2013 18:35:19 +0000 (11:35 -0700)]
ARM: davinci: da850-evm: remove vref from touchscreen platform data
The vref field was not used by the driver and was removed from the
platform data structure.
Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ferruh Yigit [Mon, 1 Jul 2013 01:50:05 +0000 (18:50 -0700)]
Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devices
Cypress TrueTouch(tm) Standard Product controllers,
Generation4 devices, SPI adapter module.
This driver adds communication support with TTSP controller
using SPI bus.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ferruh Yigit [Mon, 1 Jul 2013 01:49:44 +0000 (18:49 -0700)]
Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devices
Cypress TrueTouch(tm) Standard Product controllers,
Generation4 devices, I2C adapter module.
This driver adds communication support with TTSP controller
using I2C bus.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ferruh Yigit [Mon, 1 Jul 2013 01:49:02 +0000 (18:49 -0700)]
Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
Cypress TrueTouch(tm) Standard Product controllers,
Generetion4 devices, Core driver.
Core driver is interface between host and TTSP controller and processes
data sent by controller.
Responsibilities of module are IRQ handling, reading system information
registers and sending multi-touch protocol type B events.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ferruh Yigit [Mon, 1 Jul 2013 01:46:56 +0000 (18:46 -0700)]
Input: cyttsp - I2C driver split into two modules
Existing I2C code is for TrueTouch Gen3 devices
TrueTouch Gen4 device is using same protocol, will split driver into
two pieces to use common code with both drivers.
Read/Write functions parameter list modified, since shared code will
be used by two separate drivers and these drivers are not sharing same
structs, parameters updated to use common structures.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Daniel Drake [Mon, 1 Jul 2013 01:37:24 +0000 (18:37 -0700)]
Input: add OLPC AP-SP driver
The OLPC XO-1.75 and XO-4 laptops include a PS/2 touchpad and an AT
keyboard, yet they do not have a hardware PS/2 controller. Instead, a
firmware runs on a dedicated core ("Security Processor", part of the SoC)
that acts as a PS/2 controller through bit-banging.
Communication between the main cpu (Application Processor) and the
Security Processor happens via a standard command mechanism implemented
by the SoC. Add a driver for this interface to enable keyboard/mouse
input on this platform.
Original author: Saadia Baloch
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Wei Yongjun [Wed, 26 Jun 2013 16:32:50 +0000 (09:32 -0700)]
Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Fri, 28 Jun 2013 06:00:25 +0000 (23:00 -0700)]
Merge branch 'for-next' of git://github.com/rydberg/linux into next
Pull in changes from Henrik: "a trivial MT documentation fix".
Dmitry Torokhov [Mon, 15 Apr 2013 18:05:54 +0000 (11:05 -0700)]
Input: tps6507x-ts - remove vref from platform data
Although defined in platform data, vref is not used anywhere.
Also remove model, irq, and clear_penirq as they are not used either.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Mon, 15 Apr 2013 18:01:21 +0000 (11:01 -0700)]
Input: tps6507x-ts - use bool for booleans
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Alan Cox [Sat, 3 Nov 2012 19:16:12 +0000 (12:16 -0700)]
Input: tps6507x-ts - remove bogus unreachable code
tsc->polling is write only and the poll local is meaningless
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Thomas Abraham [Tue, 25 Jun 2013 16:20:08 +0000 (09:20 -0700)]
Input: samsung-keypad - let device core setup the default pin configuration
With device core now able to setup the default pin configuration,
the pin configuration code based on the deprecated Samsung specific
gpio bindings is removed.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Shawn Joseph [Wed, 19 Jun 2013 06:07:45 +0000 (23:07 -0700)]
Input: xpad - fix for "Mad Catz Street Fighter IV FightPad" controllers
Added MAP_TRIGGERS_TO_BUTTONS for Mad Catz Street Fighter IV FightPad
device. This controller model was already supported by the xpad
driver, but none of the buttons work correctly without this change.
Tested on kernel version 3.9.5.
Signed-off-by: Shawn Joseph <jms.576@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ping Cheng [Wed, 19 Jun 2013 06:14:25 +0000 (23:14 -0700)]
Input: wacom - add a new stylus (0x100802) for Intuos5 and Cintiqs
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tatsunosuke Tobita [Wed, 19 Jun 2013 06:13:28 +0000 (23:13 -0700)]
Input: wacom_i2c - implement hovering capability
Although BTN_TOOL_PEN and BTN_TOOL_RUBBER functioned properly, the driver
didn't have hover functionality, so it's been added.
Also, "WACOM_RETRY_CNT" was not used, so it was removed.
Signed-off-by: Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Tue, 11 Jun 2013 05:16:29 +0000 (22:16 -0700)]
Input: pxa27x-keypad - make platform data const
It should not be changed by the driver, so let's make it const pointer.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Tue, 11 Jun 2013 05:10:07 +0000 (22:10 -0700)]
Input: pxa27x-keypad - convert to using SIMPLE_DEV_PM_OPS
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Chao Xie [Mon, 6 May 2013 03:25:10 +0000 (20:25 -0700)]
Input: pxa27x-keypad - add device tree support
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Chao Xie [Mon, 6 May 2013 03:24:58 +0000 (20:24 -0700)]
Input: pxa27x-keypad - use matrix_keymap for matrix keys
pxa27x-keypad includes matrix keys. Make use of matrix_keymap
for the matrix keys.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Peter Hutterer [Fri, 31 May 2013 06:29:44 +0000 (16:29 +1000)]
Input: MT - Specify that ABS_MT_SLOT must have a minimum of 0
This is effectively already in force through input_mt_init_slots, and uinput
too ignores the actual minimum.
Since slots are a kernel-genenerated axis only, non-zero minimums make
little sense and are likely to cause errors. Better to treat a non-zero
minimum as kernel bug if it ever happens.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Ben Hutchings [Mon, 10 Jun 2013 18:05:40 +0000 (11:05 -0700)]
Input: add missing dependencies on CONFIG_HAS_IOMEM
Several drivers don't build on s390 with CONFIG_PCI disabled as
they require MMIO functions.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David Herrmann [Mon, 8 Apr 2013 04:13:19 +0000 (21:13 -0700)]
Input: evdev - flush queues during EVIOCGKEY-like ioctls
If userspace requests current KEY-state, they very likely assume that no
such events are pending in the output queue of the evdev device.
Otherwise, they will parse events which they already handled via
EVIOCGKEY(). For XKB applications this can cause irreversible keyboard
states if a modifier is locked multiple times because a CTRL-DOWN event is
handled once via EVIOCGKEY() and once from the queue via read(), even
though it should handle it only once.
Therefore, lets do the only logical thing and flush the evdev queue
atomically during this ioctl. We only flush events that are affected by
the given ioctl.
This only affects boolean events like KEY, SND, SW and LED. ABS, REL and
others are not affected as duplicate events can be handled gracefully by
user-space.
Note: This actually breaks semantics of the evdev ABI. However,
investigations showed that userspace already expects the new semantics and
we end up fixing at least all XKB applications.
All applications that are aware of this race-condition mirror the KEY
state for each open-file and detect/drop duplicate events. Hence, they do
not care whether duplicates are posted or not and work fine with this fix.
Also note that we need proper locking to guarantee atomicity and avoid
dead-locks. event_lock must be locked before queue_lock (see input-core).
However, we can safely release event_lock while flushing the queue. This
allows the input-core to proceed with pending events and only stop if it
needs our queue_lock to post new events.
This should guarantee that we don't block event-dispatching for too long
while flushing a single event queue.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Sun, 9 Jun 2013 00:41:04 +0000 (17:41 -0700)]
Linux 3.10-rc5
Mikulas Patocka [Sat, 8 Jun 2013 23:25:57 +0000 (01:25 +0200)]
hpfs: fix warnings when the filesystem fills up
This patch fixes warnings due to missing lock on write error path.
WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]()
Hardware name: empty
Pid: 26563, comm: dd Tainted: P O 3.9.4 #12
Call Trace:
hpfs_truncate+0x75/0x80 [hpfs]
hpfs_write_begin+0x84/0x90 [hpfs]
_hpfs_bmap+0x10/0x10 [hpfs]
generic_file_buffered_write+0x121/0x2c0
__generic_file_aio_write+0x1c7/0x3f0
generic_file_aio_write+0x7c/0x100
do_sync_write+0x98/0xd0
hpfs_file_write+0xd/0x50 [hpfs]
vfs_write+0xa2/0x160
sys_write+0x51/0xa0
page_fault+0x22/0x30
system_call_fastpath+0x1a/0x1f
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: stable@kernel.org # 2.6.39+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 8 Jun 2013 22:51:21 +0000 (15:51 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
- Trivial: unused variable removal
- Posix-timers: Add the clock ID to the new proc interface to make it
useful. The interface is new and should be functional when we reach
the final 3.10 release.
- Cure a false positive warning in the tick code introduced by the
overhaul in 3.10
- Fix for a persistent clock detection regression introduced in this
cycle
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Correct run-time detection of persistent_clock.
ntp: Remove unused variable flags in __hardpps
posix-timers: Show clock ID in proc file
tick: Cure broadcast false positive pending bit warning
Linus Torvalds [Sat, 8 Jun 2013 22:50:42 +0000 (15:50 -0700)]
Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux
Pull irqdomain bug fixes from Grant Likely:
"This branch contains a set of straight forward bug fixes to the
irqdomain code and to a couple of drivers that make use of it."
* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux:
irqchip: Return -EPERM for reserved IRQs
irqdomain: document the simple domain first_irq
kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.
irqdomain: export irq_domain_add_simple
Grant Likely [Thu, 6 Jun 2013 13:11:38 +0000 (14:11 +0100)]
irqchip: Return -EPERM for reserved IRQs
The irqdomain core will report a log message for any attempted map call
that fails unless the error code is -EPERM. This patch changes the
Versatile irq controller drivers to use -EPERM because it is normal for
a subset of the IRQ inputs to be marked as reserved on the various
Versatile platforms.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Linus Walleij [Thu, 6 Jun 2013 11:10:23 +0000 (12:10 +0100)]
irqdomain: document the simple domain first_irq
The first_irq needs to be zero to get a linear domain and that
comes with special semantics. We want to simplify this going
forward but some documentation never hurts.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Chen Gang [Tue, 14 May 2013 11:02:45 +0000 (19:02 +0800)]
kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.
Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq'
which related with 'irq_data' has to initialize later, or it will cause
issue.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Arnd Bergmann [Thu, 25 Apr 2013 17:28:54 +0000 (19:28 +0200)]
irqdomain: export irq_domain_add_simple
All other irq_domain_add_* functions are exported already, and apparently
this one got left out by mistake, which causes build errors for ARM
allmodconfig kernels:
ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined!
ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined!
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Linus Torvalds [Sat, 8 Jun 2013 18:56:22 +0000 (11:56 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another week, another batch of fixes for arm-soc platforms.
Nothing controversial here, a handful of fixes for regressions and/or
serious problems across several of the platforms. Things are slowing
down nicely on fix rates for 3.10"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: exynos: add debug_ll_io_init() call in exynos_init_io()
ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined
ARM: shmobile: sh73a0: Update CMT clockevent rating to 80
sh-pfc: r8a7779: Don't group USB OVC and PENC pins
ARM: mxs: icoll: Fix interrupts gpio bank 0
ARM: imx: clk-imx6q: AXI clock select index is incorrect
ARM: bcm2835: override the HW UART periphid
ARM: mvebu: Fix bug in coherency fabric low level init function
ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation
ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3
ARM: ux500: Only configure wake-up reasons on ux500 based platforms
ARM: dts: imx: fix clocks for cspi
ARM i.MX6q: fix for ldb_di_sels
Linus Torvalds [Sat, 8 Jun 2013 18:51:13 +0000 (11:51 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"MIPS fixes across the field. The only area that's standing out is the
exception handling which received it's dose of breakage as part of the
microMIPS patchset"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: ralink: add missing SZ_1M multiplier
MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf.
MIPS: OCTEON: Improve _machine_halt implementation.
MIPS: rtlx: Fix implicit declaration of function set_vi_handler()
MIPS: Trap exception handling fixes
MIPS: Quit exposing Kconfig symbols in uapi headers.
MIPS: Remove duplicate definition of check_for_high_segbits.
Linus Torvalds [Sat, 8 Jun 2013 18:50:17 +0000 (11:50 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"A single fix for compilation breakage to many of the ColdFire CPU
targets"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: only use local gpio_request_one if not using GPIOLIB
Linus Torvalds [Sat, 8 Jun 2013 18:35:20 +0000 (11:35 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Regression fixers for the big 3:
- nouveau: hdmi audio, dac load detect, s/r regressions fixed
- radeon: long standing system hang fixed, hdmi audio and rs780 fast
fb fixes
- intel: one old regression, a WARN removal, and a stop X dying fix
Otherwise one mgag200 fix, a couple of arm build fixes, and a core use
after free fix."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nv50/kms: use dac loadval from vbios, where it's available
drm/nv50/disp: force dac power state during load detect
drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix
drm/nv84/disp: Fix HDMI audio regression
drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.
drm/radeon: don't allow audio on DCE6
drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2)
radeon: Fix system hang issue when using KMS with older cards
drm/i915: no lvds quirk for hp t5740
drm/i915: Quirk the pipe A quirk in the modeset state checker
drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus
drm/mgag200: Add missing write to index before accessing data register
drm/nouveau: use mdelay instead of large udelay constants
drm/tilcd: select BACKLIGHT_LCD_SUPPORT
drm: fix a use-after-free when GPU acceleration disabled
Linus Torvalds [Sat, 8 Jun 2013 17:05:10 +0000 (10:05 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
"Fix from Andy is for dmatest regression reported by Will and Rabin has
fixed runtime ref counting for st_dma40"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmatest: do not allow to interrupt ongoing tests
dmaengine: ste_dma40: fix pm runtime ref counting
Linus Torvalds [Sat, 8 Jun 2013 01:46:51 +0000 (18:46 -0700)]
Merge tag 'trace-fixes-v3.10-rc3-v3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains 4 fixes.
The first two fix the case where full RCU debugging is enabled,
enabling function tracing causes a live lock of the system. This is
due to the added debug checks in rcu_dereference_raw() that is used by
the function tracer. These checks are also traced by the function
tracer as well as cause enough overhead to the function tracer to slow
down the system enough that the time to finish an interrupt can take
longer than when the next interrupt is triggered, causing a live lock
from the timer interrupt.
Talking this over with Paul McKenney, we came up with a fix that adds
a new rcu_dereference_raw_notrace() that does not perform these added
checks, and let the function tracer use that.
The third commit fixes a failed compile when branch tracing is
enabled, due to the conversion of the trace_test_buffer() selftest
that the branch trace wasn't converted for.
The forth patch fixes a bug caught by the RCU lockdep code where a
rcu_read_lock() is performed when rcu is disabled (either going to or
from idle, or user space). This happened on the irqsoff tracer as it
calls task_uid(). The fix here was to use current_uid() when possible
that doesn't use rcu locking. Which luckily, is always used when
irqsoff calls this code."
* tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Use current_uid() for critical time tracing
tracing: Fix bad parameter passed in branch selftest
ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends
rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu()
Rafael J. Wysocki [Sat, 8 Jun 2013 00:55:07 +0000 (02:55 +0200)]
Revert "ACPI / scan: do not match drivers against objects having scan handlers"
Commit
9f29ab11ddbf ("ACPI / scan: do not match drivers against objects
having scan handlers") introduced a boot regression on Tony's ia64 HP
rx2600. Tony says:
"It panics with the message:
Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel
[...] my problem comes from arch/ia64/hp/common/sba_iommu.c
where the code in sba_init() says:
acpi_bus_register_driver(&acpi_sba_ioc_driver);
if (!ioc_list) {
but because of this change we never managed to call ioc_init()
so ioc_list doesn't get set up, and we die."
Revert it to avoid this breakage and we'll fix the problem it attempted
to address later.
Reported-by: Tony Luck <tony.luck@gmail.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Sat, 8 Jun 2013 01:19:30 +0000 (18:19 -0700)]
Merge tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
From Shawn Guo, mxs fixes for 3.10:
- Since the time we move to MULTI_IRQ_HANDLER, the 0x7f polling for no
interrupt in icoll_handle_irq() becomes insane, because 0x7f is an
valid interrupt number, the irq of gpio bank 0. That unnecessary
polling results in the driver not detecting when irq 0x7f is active
which makes the machine effectively dead lock. The fix removes the
interrupt poll loop and allows usage of gpio0 interrupt without an
infinite loop.
* tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs: icoll: Fix interrupts gpio bank 0
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 8 Jun 2013 01:18:08 +0000 (18:18 -0700)]
Merge tag 'imx-fixes-3.10-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
From Shawn Guo, imx fixes for 3.10, take 2:
- One device tree fix for all spi node to have per clock added.
The clock is needed by spi driver to calculate bit rate divisor.
The spi node in the current device trees either does not have the
clock or is defined as dummy clock, in which case the driver probe
will fail or spi will run at a wrong bit rate.
- Two imx6q clock fixes, which correct axi_sels and ldb_di_sels.
* tag 'imx-fixes-3.10-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx: clk-imx6q: AXI clock select index is incorrect
ARM: dts: imx: fix clocks for cspi
ARM i.MX6q: fix for ldb_di_sels
Signed-off-by: Olof Johansson <olof@lixom.net>
Doug Anderson [Wed, 5 Jun 2013 20:56:33 +0000 (13:56 -0700)]
ARM: exynos: add debug_ll_io_init() call in exynos_init_io()
If the early MMU mapping of the UART happens to get booted out of the
TLB between the start of paging_init() and when we finally re-add the
UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if
we've got early_printk enabled. Avoid this hang by calling
debug_ll_io_init() early.
Without this patch, you can reliably reproduce a hang when early
printk is enabled by adding flush_tlb_all() at the start of
exynos_init_io(). After this patch the hang goes away.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This page took 0.048505 seconds and 5 git commands to generate.