staging:iio:magnetometer:ak8975: allocate chip state with iio_dev.

Here the ordering is a little tricky, so to keep changes minimal, a copy of the gpio
number is introduced.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:resolver:ad2s90 general cleanup

Very simple driver, so not much to do.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:resolver:ad2s120x cleanup.

I've currently squashed the vel + pos combined attribute.  If people need them
precisely paired I doubt they will get them from the sysfs interface anyway.
If that is a requirement it should come via a buffer implementation.

Note this patch leaves the completely non standard interface alone.
That will get fixed later.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:resolver:ad2s1210 general driver cleanup.

Note I haven't made any changes to the userspace interface as yet.
This is all about cleaning up what was actually there (handling
all errors etc).

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:meter:ade7854: Allocate buffers in state and state with iio_dev.

Requires moving a few things around, but should be no functional changes.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:meter:ade7754: allocate state with iio_dev and buffers in state.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:meter:ade7753 allocate chip state with iio_dev; allocate buffers within state

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro:adxrs450: allocate chip state with iio_dev

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro:adis16260: allocate chip state with iio_dev and use iio_priv to access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro:adis16130: allocate chip state with iio_dev and use iio_priv to access it.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro:adis16080: allocate chip state with iio_dev

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro:adis16060 allocate chip state with iio_dev.

This is still a very odd driver.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dds:ad9951: allocate chip state with iio_dev

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dds:ad9910: allocate chip state with iio_dev

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dds:ad9810: allocate chip state with iio_dev and use iio_priv for access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dds:ad9850 allocate chip state with iio_dev + fix name of attr group.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:ad9834: allocate chip state with iio_dev and use iio_priv to access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dds:ad9832: allocate chip state with iio_dev and use iio_priv to access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dds:ad5930 Fix attr group location + allocate state with iio_dev

The main attribute group was placed under driver name for some reason.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dac:max517: allocate chip state with iio_dev and use iio_priv to access it.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dac:ad5791: allocate chip state with iio_dev and use iio_priv for access.

Slightly fiddly case with two regulators - could reorder, but this is the approach with
smallest likely impact.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dac:ad5446: allocate chip state with iio_dev and use iio_priv for access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dac:ad5504: allocate chip state with iio_dev and use iio_priv for access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:dac:ad5624r: allocate chip state with iio_dev and use iio_priv for access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:adt7410 allocate chip state with iio_dev and use iio_priv to access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:addac:adt7316: allocate chip state with iio_dev and use iio_priv to access.

Various minor cleanups needed to deal with removal of iio_dev pointer from chip state.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:adt7310: allocate chip state with iio_dev and use iio_priv for access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:adt75: allocate chip state with iio_dev and cleanup some function calls.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7816: allocate chip state with iio_dev and use iio_priv to access.

Again, get rid of unwanted iio_dev pointer in state.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7745 allocate chip state with iio_dev and use iio_priv to access.

Also remove the iio_dev pointer from chip state as never needed.

V2: Actually allocate the space for iio_priv data.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7314 allocate chip state with iio_dev and use iio_priv to access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7291: allocate chip state with iio_dev and use iio_priv for access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7152: allocate chip state with iio_dev and use iio_priv for access.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7150: allocate chip state with iio_dev and use iio_priv to access.

V2 - actually allocate some space for the iio_priv data.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x clear out last few uses of iio_dev->dev_data.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7887 clear out last few uses of iio_dev->dev_data.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7476 allocate state with iio_dev and use iio_priv to access.

Reg handling is a little fiddly given the ordering of calls.

All part of getting rid of iio_dev->dev_data

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:accel:kxsd9: allocate state with iio_dev and use iio_priv to access.

V2: Actually allocate the storage.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:accel:sca3000: allocate state in iio_dev and use iio_priv to access.

Mechanical change.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:accel:adis16220 allocate tx and rx in state plus state via iio_priv

Few other misc cleanups.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:accel:adis16240 allocate tx and rx in state plus state via iio_priv

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:accel:adis16209 allocate tx and rx in state plus state via iio_priv

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:accel:adis16204 allocate tx and rx in state plus state via iio_priv

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:accel:adis16203 move buffers into state and use iio_priv to avoid allocating state separately.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

iio: industrialio-core: iio_write_channel_info accept IIO_VAL_INT_PLUS_NANO

Allow iio_write_channel_info() to accept IIO_VAL_INT_PLUS_NANO

Changes since V1:
use callback to query expected format/precision

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

iio: trigger: Add filter callback

Allow devices to reject triggers and vice versa.

Changes since V1:
Added kernel-doc
Moved callback into iio_info
Changed function naming
Revised return value passing
Add forward declaration to avoid warnings

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

iio: trigger: Move declaration of struct iio_poll_func to avoid warnings

Move declaration of struct iio_poll_func to avoid warnings

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

iio: industrialio-core: introduce IIO_VAL_INT_PLUS_NANO

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: speakup: Use kstrtoul_from_user

This patch replaces the code for getting an unsigned long from a
userspace buffer by a simple call to kstroul_from_user.
This makes it easier to read and less error prone.

Kernel Version: staging of 20110606

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Winbond: Fix assorted spacing issues.

Fix the phy_calibration.c file's spacing issues and convert the spaces
to tabs. This reduces the number of errors and warnings returned by
checkpatch.pl.

Signed-off-by: Akshay Joshi <me@akshayjoshi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Removing '_t' from ce_stats_t struct

Removing '_t' from ce_stats_t struct name and renaming et131x_adapter ce_stats member from
 'Stats' to 'stats'

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Fixes multiple 'WARNING: do not add new typedefs'.

Removes unions, and uses definitions for bit manipulations.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: et131x_netdev.c checkpatch fixes

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: et131x_initpci.c checkpatch fixes

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: et131x_adapter.h checkpatch fixes

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: et1310_rx.c checkpatch fixes

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: checkpatch fixes for et1310_address_map.h (All 'do not add new typedefs')

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Fixed numerous coding style issues

Fixed all coding style issues thrown by checkpatch.pl.

Signed-off-by: Ken O'Brien <kernel@kenobrien.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Fixed numerous coding style issues

Coding style review: fixed all warnings, and all but three
typedef errors.

Signed-off-by: Ken O'Brien <kernel@kenobrien.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: fix brace coding style issue in prism2fw.c

This is a patch to the prism2fw.c file that fixes up a brace
warning found by the checkpatch.pl tool.

Signed-off-by: Joseph Salisbury <salisbury.joseph@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: octeon: use printk_ratelimited instead of printk_ratelimit

As per printk_ratelimit comment, it should not be used

Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: tty: epca: fixing return code-style issue

Fixed a coding-style issue, ``return'' with parens.

Signed-off-by: Aviv Ben-Yosef <aviv.by@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: msm: Use angle brackets for system includes

Use the normal include style.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tm6000: Cleaned up code style in tm6000-alsa.c

Fixed all errors but one (possibly a mistake by the checker) reported by
the checker.

Signed-off-by: Curtis McEnroe <programble@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tm6000: Clean up code style in tm6000-input.c

Removed unnecessary braces.

Signed-off-by: Curtis McEnroe <programble@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tm6000: Cleaned up code style in tm6000-i2c.c

Replaced __FUNCTION__ with __func__

Signed-off-by: Curtis McEnroe <programble@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tm6000: Cleaned up code style in tm6000-dbv.c

Replaced usage of __FUNCTION__ with __func__

Signed-off-by: Curtis McEnroe <programble@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Fix uninitialized variable and style issues

The return variable of psb_gtt_pin() may be used
uninitialized. Also fixed some coding style issues.

Signed-off-by: Andre Bartke <andre.bartke@gmail.com>
[Reapplied by hand due to other changes]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Set the correct bits according to the pipe

Squash a hardcoded assumption we shouldn't really make

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Make GTT pages uncached

Clean up the GTT code a bit, make the pages uncached and go via the proper
interfaces. This avoids any aliasing problems.

On the CPU side we need to access the pages via their true addresses not via
the GTT. This is fine for GEM created fb objects for X. For the kernel fb
when not in stolen RAM we are going to need to use vm_map_ram() and hope we
have enough virtual address space to steal.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: fix warnings

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: VME: Introduce IOCTL to generate VME interrupts.

The vme_irq_set is oblviously not needed (a remnant from old tests) and the
IOCTL exchange types have been updated following Greg's comments.

Allow the IOCTL call to generate VME interrupts when called on the vme/ctl
device with the right arguments.

Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: VME: Fix ca91cx42 VME interrupt generation.

The wait_event_interruptible call requires a condition as second argument that
needs to be true sometimes, which is obviously not the case with '0'. The new
logic is inspired from the tsi148 driver and takes into account Universe II chip
specifics.

Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: VME: Make vme/ctl device available for IOCTL operations only.

Resurrect the vme/ctl device by allowing to open it even if it has no resources
and make related read/write/llseek operations dummy.

Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: VME: Fix Universe II int ack logic.

The driver must acknowledge the interrupts that have been actually serviced, not
the ones active. The current code could acknowledge an interrupt that has not
been serviced at all.

Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging VME: Fix remaining checkpatch.pl errors.

This patch solves all the existing issues reported by checkpatch.pl in the VME
sub-system.

Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tm6000: cleaned up code in tm6000-video.c according to coding style

Fixed all errors reported by the checker in tm6000-video.c mostly relating
to whitespace.

Signed-off-by: Curtis McEnroe <programble@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (adv_pci1723): coding style, fix whitespace before quoted newline

Small fix in adv_pci1723.c for a "whitespace before quoted newline" warning
from checkpatch.pl

Signed-off-by: Matt Billenstein <matt@vazor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: intel_sst: Fix memory leak

In case of an error stream_bufs is not freed here.

Signed-off-by: Andre Bartke <andre.bartke@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: altera-stapl: Fix memory leak of altera_init()

In case kzalloc() fails the second or third time
we should free the previous allocated resources.
In order to keep one return point and to keep the cleanup code to one
place, some reordering was necessary.

Also while at it, removed the *sizeof(char) - to quote Linus:
"" Also removed the silly "* sizeof(u8)".  If that isn't 1, we have way
   deeper problems than a simple multiplication can fix. """

Reported-by: Andre Bartke <andre.bartke@gmail.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: use videobuf2 framework for drivers/staging/dt3155v4l driver

This patch transforms drivers/staging/dt3155v4l driver to use videobuf2 framework.
Tested and works with "xawtv -f".

Either streaming API or read method should be selected during kernel configuration.

If both are selected into the driver (not possible without another patching),
either due to my misunderstanding or problems in xawtv (or both), I get kernel panic
after some start/stop of xawtv (not strictly reproducible).

Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: synaptics: Implement error handling for rmi4 touch regulator

Implement the error handling for regulator in synaptics
rmi4 touch screen

Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: sep: fix function name in kernel-doc

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: sep: clean up some checkpatch.pl issues

Use consistent spacing in array indexing, and a whitespace fix.

Signed-off-by: Tim Retout <tim@retout.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Convert vmalloc/memset to vzalloc

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tty: fixed some whitespace coding style issues

Fixed some whitespace coding style issues.

Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fixed a declaration coding style issue

Fixed a declaration coding style issue.

Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove unneeded version.h include from drivers/staging/mei/main.c

It was pointed out by 'make versioncheck' that include of
linux/version.h is not needed in drivers/staging/mei/main.c .
This patch removes it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: mei: fix possible usage of uninitialized variable

Fix warning: reported in http://marc.info/?l=linux-kernel&m=130812960402606&w=2

drivers/staging/mei/interrupt.c: warning: 'buffer' may be used uninitialized in this function:  => 198

It is a real issue and wrong path in execution is taken when
list is empty or (cl && _mei_irq_thread_state_ok(cl, mei_hdr))
evaluates to false

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: mei: io_list functions revamp

1. remove list used for loop. There were only 2 loops used in non
   time critical places so we can safely unroll them
2. normalize functions names operating on io_list to mei_io_list_<op>
3. rename mei_fe_same_id to mei_cl_cmp_id  used for comparing list
   elements containing struct mei_cl
4. group together  io_list functions in the header file

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: mei: rename num_mei_me_clients to me_clients_num

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: mei: mei_dev - kill unused members

remove write only/unsed variables
mei_dev.write_hang and mei_io_lis.tdevice_extension

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: mei: mei_dev - use type bool instead of int

use type bool for boolean variables in struct mei_dev
this should save some space providing boolean is 8 bits

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: mei: fix mei driver namespace

All global functions must start with mei_ to reduce the risk of name colisions

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: mei: mei_dev.h: don't break lines where not needed.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: Add PMKSA cache management commands

Implement cfg80211_ops set_pmksa, del_pmksa, and flush_pmksa to enable
PMKSA caching support.

kvalo: backported from ath6kl-cleanup tree

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: testmode support

Add testmode support for running low level hardware tests. The testmode
is enabled by setting testmode module parameter to 1.

For now only a simple command passing is supported. More advanced
support will be implemented later.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: export firmware version to user space

cfg80211 exports wiphy->fw_version to user space via ethtool interface.

The obligatory screenshot:

$ sudo ethtool -i wlan0
driver: ath6kl_hifdev
version: 2.6.39-rc4+
firmware-version: 3:1:1:149
bus-info: mmc0:0001:1
$

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove unneeded version.h includes from drivers/staging/ath6kl/

It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/staging/ath6kl/.
This patch removes them.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: cache firmware

Drivers should not request firmware during resume. Fix ath6kl to
cache the firmware instead.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: stable <stable@kernel.org> [3.0]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>