drtracing.org Git - deliverable/linux.git/log

Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize

With 64K sectorsize, 1G sized block group cannot span across bitmaps.
To execute test_bitmaps() function, this commit allocates
"BITS_PER_BITMAP * sectorsize + PAGE_SIZE" sized block group.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: self-tests: Use macros instead of constants and add missing newline

This commit replaces numerical constants with appropriate
preprocessor macros.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes

To test all possible sectorsizes, this commit adds a sectorsize
array. This commit executes the tests for all possible sectorsizes and
nodesizes.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE

On ppc64, PAGE_SIZE is 64k which is same as BTRFS_MAX_METADATA_BLOCKSIZE.
In such a scenario, we will never be able to have an extent buffer
containing more than one page. Hence in such cases this commit does not
execute the page straddling tests.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: self-tests: Support non-4k page size

self-tests code assumes 4k as the sectorsize and nodesize. This commit
fix hardcoded 4K. Enables the self-tests code to be executed on non-4k
page sized systems (e.g. ppc64).

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: Fix integer overflow when calculating bytes_per_bitmap

On ppc64, bytes_per_bitmap will be (65536*8*65536). Hence append UL to
fix integer overflow.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: test_check_exists: Fix infinite loop when searching for free space entries

On a ppc64 machine using 64K as the block size, assume that the RB
tree at btrfs_free_space_ctl->free_space_offset contains following
two entries:

1. A bitmap entry having an offset value of 0 and having the bits
   corresponding to the address range [128M+512K, 128M+768K] set.
2. An extent entry corresponding to the address range
   [128M-256K, 128M-128K]

In such a scenario, test_check_exists() invoked for checking the
existence of address range [128M+768K, 256M] can lead to an
infinite loop as explained below:

- Checking for the extent entry fails.
- Checking for a bitmap entry results in the free space info in
  range [128M+512K, 128M+768K] beng returned.
- rb_prev(info) returns NULL because the bitmap entry starting from
  offset 0 comes first in the RB tree.
- current_node = bitmap node.
- while (current_node)
tmp = rb_next(bitmap_node);/*tmp is extent based free space entry*/
Since extent based free space entry's last address is smaller
than the address being searched for (i.e. 128M+768K) we
incorrectly again obtain the extent node as the "next right node"
of the RB tree and thus end up looping infinitely.

This patch fixes the issue by checking the "tmp" variable which point
to the most recently searched free space node.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: fix handling of faults from btrfs_copy_from_user

When btrfs_copy_from_user isn't able to copy all of the pages, we need
to adjust our accounting to reflect the work that was actually done.

Commit 2e78c927d79 changed around the decisions a little and we ended up
skipping the accounting adjustments some of the time.  This commit makes
sure that when we don't copy anything at all, we still hop into
the adjustments, and switches to release_bytes instead of write_bytes,
since write_bytes isn't aligned.

The accounting errors led to warnings during btrfs_destroy_inode:

[   70.847532] WARNING: CPU: 10 PID: 514 at fs/btrfs/inode.c:9350 btrfs_destroy_inode+0x2b3/0x2c0
[   70.847536] Modules linked in: i2c_piix4 virtio_net i2c_core input_leds button led_class serio_raw acpi_cpufreq sch_fq_codel autofs4 virtio_blk
[   70.847538] CPU: 10 PID: 514 Comm: umount Tainted: G        W 4.6.0-rc6_00062_g2997da1-dirty #23
[   70.847539] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014
[   70.847542]  0000000000000000 ffff880ff5cafab8 ffffffff8149d5e9 0000000000000202
[   70.847543]  0000000000000000 0000000000000000 0000000000000000 ffff880ff5cafb08
[   70.847547]  ffffffff8107bdfd ffff880ff5cafaf8 000024868120013d ffff880ff5cafb28
[   70.847547] Call Trace:
[   70.847550]  [<ffffffff8149d5e9>] dump_stack+0x51/0x78
[   70.847551]  [<ffffffff8107bdfd>] __warn+0xfd/0x120
[   70.847553]  [<ffffffff8107be3d>] warn_slowpath_null+0x1d/0x20
[   70.847555]  [<ffffffff8139c9e3>] btrfs_destroy_inode+0x2b3/0x2c0
[   70.847556]  [<ffffffff812003a1>] ? __destroy_inode+0x71/0x140
[   70.847558]  [<ffffffff812004b3>] destroy_inode+0x43/0x70
[   70.847559]  [<ffffffff810b7b5f>] ? wake_up_bit+0x2f/0x40
[   70.847560]  [<ffffffff81200c68>] evict+0x148/0x1d0
[   70.847562]  [<ffffffff81398ade>] ? start_transaction+0x3de/0x460
[   70.847564]  [<ffffffff81200d49>] dispose_list+0x59/0x80
[   70.847565]  [<ffffffff81201ba0>] evict_inodes+0x180/0x190
[   70.847566]  [<ffffffff812191ff>] ? __sync_filesystem+0x3f/0x50
[   70.847568]  [<ffffffff811e95f8>] generic_shutdown_super+0x48/0x100
[   70.847569]  [<ffffffff810b75c0>] ? woken_wake_function+0x20/0x20
[   70.847571]  [<ffffffff811e9796>] kill_anon_super+0x16/0x30
[   70.847573]  [<ffffffff81365cde>] btrfs_kill_super+0x1e/0x130
[   70.847574]  [<ffffffff811e99be>] deactivate_locked_super+0x4e/0x90
[   70.847576]  [<ffffffff811e9e61>] deactivate_super+0x51/0x70
[   70.847577]  [<ffffffff8120536f>] cleanup_mnt+0x3f/0x80
[   70.847579]  [<ffffffff81205402>] __cleanup_mnt+0x12/0x20
[   70.847581]  [<ffffffff81098358>] task_work_run+0x68/0xa0
[   70.847582]  [<ffffffff810022b6>] exit_to_usermode_loop+0xd6/0xe0
[   70.847583]  [<ffffffff81002e1d>] do_syscall_64+0xbd/0x170
[   70.847586]  [<ffffffff817d4dbc>] entry_SYSCALL64_slow_path+0x25/0x25

This is the test program I used to force short returns from
btrfs_copy_from_user

void *dontneed(void *arg)
{
char *p = arg;
int ret;

while(1) {
ret = madvise(p, BUFSIZE/4, MADV_DONTNEED);
if (ret) {
perror("madvise");
exit(1);
}
}
}

int main(int ac, char **av) {
int ret;
int fd;
char *filename;
unsigned long offset;
char *buf;
int i;
pthread_t tid;

if (ac != 2) {
fprintf(stderr, "usage: dammitdave filename\n");
exit(1);
}

buf = mmap(NULL, BUFSIZE, PROT_READ|PROT_WRITE,
   MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
if (buf == MAP_FAILED) {
perror("mmap");
exit(1);
}
memset(buf, 'a', BUFSIZE);
filename = av[1];

ret = pthread_create(&tid, NULL, dontneed, buf);
if (ret) {
fprintf(stderr, "error %d from pthread_create\n", ret);
exit(1);
}

ret = pthread_detach(tid);
if (ret) {
fprintf(stderr, "pthread detach failed %d\n", ret);
exit(1);
}

while (1) {
fd = open(filename, O_RDWR | O_CREAT, 0600);
if (fd < 0) {
perror("open");
exit(1);
}

for (i = 0; i < ROUNDS; i++) {
int this_write = BUFSIZE;

offset = rand() % MAXSIZE;
ret = pwrite(fd, buf, this_write, offset);
if (ret < 0) {
perror("pwrite");
exit(1);
} else if (ret != this_write) {
fprintf(stderr, "short write to %s offset %lu ret %d\n",
filename, offset, ret);
exit(1);
}
if (i == ROUNDS - 1) {
ret = sync_file_range(fd, offset, 4096,
    SYNC_FILE_RANGE_WRITE);
if (ret < 0) {
perror("sync_file_range");
exit(1);
}
}
}
ret = ftruncate(fd, 0);
if (ret < 0) {
perror("ftruncate");
exit(1);
}
ret = close(fd);
if (ret) {
perror("close");
exit(1);
}
ret = unlink(filename);
if (ret) {
perror("unlink");
exit(1);
}

}
return 0;
}

Signed-off-by: Chris Mason <clm@fb.com>
Reported-by: Dave Jones <dsj@fb.com>
Fixes: 2e78c927d79333f299a8ac81c2fd2952caeef335
cc: stable@vger.kernel.org # v4.6
Signed-off-by: Chris Mason <clm@fb.com>

Merge branch 'for-chris-4.7' of git://git./linux/kernel/git/kdave/linux into for-linus-4.7

Merge branch 'dev/comp-workspaces' into for-chris-4.7-20160525

Merge branch 'cleanups-4.7' into for-chris-4.7-20160525

Merge branch 'misc-4.7' into for-chris-4.7-20160525

btrfs: fix string and comment grammatical issues and typos

Signed-off-by: Nicholas D Steeves <nsteeves@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: scrub: Set bbio to NULL before calling btrfs_map_block

We usually call btrfs_put_bbio() when btrfs_map_block() failed,
btrfs_put_bbio() works right whether bbio is a valid value, or NULL.

But there is a exception, in some case, btrfs_map_block() will return
fail without touching *bbio(keeping its original value), and if bbio
was not initialized yet, invalid memory accessing will happened.

Above case is in scrub_missing_raid56_pages(), and similar case in
scrub_raid56_parity().

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: fix unexpected return value of fiemap

btrfs's fiemap is supposed to return 0 on success and return < 0 on
error. however, ret becomes 1 after looking up the last file extent:

btrfs_lookup_file_extent ->
btrfs_search_slot(..., ins_len=0, cow=0)

and if the offset is beyond EOF, we'll get 'path' pointed to the place
of potentail insertion, and ret == 1.

This may confuse applications using ioctl(FIEL_IOC_FIEMAP).

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: free sys_array eb as soon as possible

While reading sys_chunk_array in superblock, btrfs creates a temporary
extent buffer. Since we don't use it after finishing reading
sys_chunk_array, we don't need to keep it in memory.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Merge branch 'for-chris-4.7' of git://git./linux/kernel/git/fdmanana/linux into for-linus-4.7

Signed-off-by: Chris Mason <clm@fb.com>

Merge branch 'for-chris-4.7' of git://git./linux/kernel/git/kdave/linux into for-linus-4.7

Merge branch 'foreign/jeffm/uapi' into for-chris-4.7-20160516

# Conflicts:
# include/uapi/linux/btrfs.h

Merge branch 'foreign/anand/dev-del-by-id-ext' into for-chris-4.7-20160516

Merge branch 'cleanups-4.7' into for-chris-4.7-20160516

Merge branch 'misc-4.7' into for-chris-4.7-20160516

btrfs: fix memory leak during RAID 5/6 device replacement

A 'struct bio' is allocated in scrub_missing_raid56_pages(), but it was never
freed anywhere.

Signed-off-by: Scott Talbert <scott.talbert@hgst.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: add semaphore to synchronize direct IO writes with fsync

Due to the optimization of lockless direct IO writes (the inode's i_mutex
is not held) introduced in commit 38851cc19adb ("Btrfs: implement unlocked
dio write"), we started having races between such writes with concurrent
fsync operations that use the fast fsync path. These races were addressed
in the patches titled "Btrfs: fix race between fsync and lockless direct
IO writes" and "Btrfs: fix race between fsync and direct IO writes for
prealloc extents". The races happened because the direct IO path, like
every other write path, does create extent maps followed by the
corresponding ordered extents while the fast fsync path collected first
ordered extents and then it collected extent maps. This made it possible
to log file extent items (based on the collected extent maps) without
waiting for the corresponding ordered extents to complete (get their IO
done). The two fixes mentioned before added a solution that consists of
making the direct IO path create first the ordered extents and then the
extent maps, while the fsync path attempts to collect any new ordered
extents once it collects the extent maps. This was simple and did not
require adding any synchonization primitive to any data structure (struct
btrfs_inode for example) but it makes things more fragile for future
development endeavours and adds an exceptional approach compared to the
other write paths.

This change adds a read-write semaphore to the btrfs inode structure and
makes the direct IO path create the extent maps and the ordered extents
while holding read access on that semaphore, while the fast fsync path
collects extent maps and ordered extents while holding write access on
that semaphore. The logic for direct IO write path is encapsulated in a
new helper function that is used both for cow and nocow direct IO writes.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>

Btrfs: fix race between block group relocation and nocow writes

Relocation of a block group waits for all existing tasks flushing
dellaloc, starting direct IO writes and any ordered extents before
starting the relocation process. However for direct IO writes that end
up doing nocow (inode either has the flag nodatacow set or the write is
against a prealloc extent) we have a short time window that allows for a
race that makes relocation proceed without waiting for the direct IO
write to complete first, resulting in data loss after the relocation
finishes. This is illustrated by the following diagram:

           CPU 1                                     CPU 2

btrfs_relocate_block_group(bg X)

                                               direct IO write starts against
                                               an extent in block group X
                                               using nocow mode (inode has the
                                               nodatacow flag or the write is
                                               for a prealloc extent)

                                               btrfs_direct_IO()
                                                 btrfs_get_blocks_direct()
                                                   --> can_nocow_extent() returns 1

   btrfs_inc_block_group_ro(bg X)
     --> turns block group into RO mode

   btrfs_wait_ordered_roots()
     --> returns and does not know about
         the DIO write happening at CPU 2
         (the task there has not created
          yet an ordered extent)

   relocate_block_group(bg X)
     --> rc->stage == MOVE_DATA_EXTENTS

     find_next_extent()
       --> returns extent that the DIO
           write is going to write to

     relocate_data_extent()

       relocate_file_extent_cluster()

         --> reads the extent from disk into
             pages belonging to the relocation
             inode and dirties them

                                                   --> creates DIO ordered extent

                                                 btrfs_submit_direct()
                                                   --> submits bio against a location
                                                       on disk obtained from an extent
                                                       map before the relocation started

   btrfs_wait_ordered_range()
     --> writes all the pages read before
         to disk (belonging to the
         relocation inode)

   relocation finishes

                                                 bio completes and wrote new data
                                                 to the old location of the block
                                                 group

So fix this by tracking the number of nocow writers for a block group and
make sure relocation waits for that number to go down to 0 before starting
to move the extents.

The same race can also happen with buffered writes in nocow mode since the
patch I recently made titled "Btrfs: don't do unnecessary delalloc flushes
when relocating", because we are no longer flushing all delalloc which
served as a synchonization mechanism (due to page locking) and ensured
the ordered extents for nocow buffered writes were created before we
called btrfs_wait_ordered_roots(). The race with direct IO writes in nocow
mode existed before that patch (no pages are locked or used during direct
IO) and that fixed only races with direct IO writes that do cow.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>

Btrfs: fix race between fsync and direct IO writes for prealloc extents

When we do a direct IO write against a preallocated extent (fallocate)
that does not go beyond the i_size of the inode, we do the write operation
without holding the inode's i_mutex (an optimization that landed in
commit 38851cc19adb ("Btrfs: implement unlocked dio write")). This allows
for a very tiny time window where a race can happen with a concurrent
fsync using the fast code path, as the direct IO write path creates first
a new extent map (no longer flagged as a prealloc extent) and then it
creates the ordered extent, while the fast fsync path first collects
ordered extents and then it collects extent maps. This allows for the
possibility of the fast fsync path to collect the new extent map without
collecting the new ordered extent, and therefore logging an extent item
based on the extent map without waiting for the ordered extent to be
created and complete. This can result in a situation where after a log
replay we end up with an extent not marked anymore as prealloc but it was
only partially written (or not written at all), exposing random, stale or
garbage data corresponding to the unwritten pages and without any
checksums in the csum tree covering the extent's range.

This is an extension of what was done in commit de0ee0edb21f ("Btrfs: fix
race between fsync and lockless direct IO writes").

So fix this by creating first the ordered extent and then the extent
map, so that this way if the fast fsync patch collects the new extent
map it also collects the corresponding ordered extent.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>

Btrfs: fix number of transaction units for renames with whiteout

When we do a rename with the whiteout flag, we need to create the whiteout
inode, which in the worst case requires 5 transaction units (1 inode item,
1 inode ref, 2 dir items and 1 xattr if selinux is enabled). So bump the
number of transaction units from 11 to 16 if the whiteout flag is set.

Signed-off-by: Filipe Manana <fdmanana@suse.com>

Btrfs: pin logs earlier when doing a rename exchange operation

The btrfs_rename_exchange() started as a copy-paste from btrfs_rename(),
which had a race fixed by my previous patch titled "Btrfs: pin log earlier
when renaming", and so it suffers from the same problem.

We pin the logs of the affected roots after we insert the new inode
references, leaving a time window where concurrent tasks logging the
inodes can end up logging both the new and old references, resulting
in log trees that when replayed can turn the metadata into inconsistent
states. This behaviour was added to btrfs_rename() in 2009 without any
explanation about why not pinning the logs earlier, just leaving a
comment about the posibility for the race. As of today it's perfectly
safe and sane to pin the logs before we start doing any of the steps
involved in the rename operation.

Signed-off-by: Filipe Manana <fdmanana@suse.com>

Btrfs: unpin logs if rename exchange operation fails

If rename exchange operations fail at some point after we pinned any of
the logs, we end up aborting the current transaction but never unpin the
logs, which leaves concurrent tasks that are trying to sync the logs (as
part of an fsync request from user space) blocked forever and preventing
the filesystem from being unmountable.

Fix this by safely unpinning the log.

Signed-off-by: Filipe Manana <fdmanana@suse.com>

Btrfs: fix inode leak on failure to setup whiteout inode in rename

If we failed to fully setup the whiteout inode during a rename operation
with the whiteout flag, we ended up leaking the inode, not decrementing
its link count nor removing all its items from the fs/subvol tree.

Signed-off-by: Filipe Manana <fdmanana@suse.com>

btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT

Two new flags, RENAME_EXCHANGE and RENAME_WHITEOUT, provide for new
behavior in the renameat2() syscall. This behavior is primarily used by
overlayfs. This patch adds support for these flags to btrfs, enabling it to
be used as a fully functional upper layer for overlayfs.

RENAME_EXCHANGE support was written by Davide Italiano originally
submitted on 2 April 2015.

Signed-off-by: Davide Italiano <dccitaliano@gmail.com>
Signed-off-by: Dan Fuhry <dfuhry@datto.com>
[ remove unlikely ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>

Btrfs: pin log earlier when renaming

We were pinning the log right after the first step in the rename operation
(inserting inode ref for the new name in the destination directory)
instead of doing it before. This behaviour was introduced in 2009 for some
reason that was not mentioned neither on the changelog nor any comment,
with the drawback of a small time window where concurrent log writers can
end up logging the new inode reference for the inode we are renaming while
the rename operation is in progress (so that we can end up with a log
containing both the new and old references). As of today there's no reason
to not pin the log before that first step anymore, so just fix this.

Signed-off-by: Filipe Manana <fdmanana@suse.com>

Btrfs: unpin log if rename operation fails

If rename operations fail at some point after we pinned the log, we end
up aborting the current transaction but never unpin the log, which leaves
concurrent tasks that are trying to sync the log (as part of an fsync
request from user space) blocked forever and preventing the filesystem
from being unmountable.

Fix this by safely unpinning the log.

Signed-off-by: Filipe Manana <fdmanana@suse.com>

Btrfs: don't do unnecessary delalloc flushes when relocating

Before we start the actual relocation process of a block group, we do
calls to flush delalloc of all inodes and then wait for ordered extents
to complete. However we do these flush calls just to make sure we don't
race with concurrent tasks that have actually already started to run
delalloc and have allocated an extent from the block group we want to
relocate, right before we set it to readonly mode, but have not yet
created the respective ordered extents. The flush calls make us wait
for such concurrent tasks because they end up calling
filemap_fdatawrite_range() (through btrfs_start_delalloc_roots() ->
__start_delalloc_inodes() -> btrfs_alloc_delalloc_work() ->
btrfs_run_delalloc_work()) which ends up serializing us with those tasks
due to attempts to lock the same pages (and the delalloc flush procedure
calls the allocator and creates the ordered extents before unlocking the
pages).

These flushing calls not only make us waste time (cpu, IO) but also reduce
the chances of writing larger extents (applications might be writing to
contiguous ranges and we flush before they finish dirtying the whole
ranges).

So make sure we don't flush delalloc and just wait for concurrent tasks
that have already started flushing delalloc and have allocated an extent
from the block group we are about to relocate.

This change also ends up fixing a race with direct IO writes that makes
relocation not wait for direct IO ordered extents. This race is
illustrated by the following diagram:

        CPU 1                                       CPU 2

btrfs_relocate_block_group(bg X)

                                           starts direct IO write,
                                           target inode currently has no
                                           ordered extents ongoing nor
                                           dirty pages (delalloc regions),
                                           therefore the root for our inode
                                           is not in the list
                                           fs_info->ordered_roots

                                           btrfs_direct_IO()
                                             __blockdev_direct_IO()
                                               btrfs_get_blocks_direct()
                                                 btrfs_lock_extent_direct()
                                                   locks range in the io tree
                                                 btrfs_new_extent_direct()
                                                   btrfs_reserve_extent()
                                                     --> extent allocated
                                                         from bg X

   btrfs_inc_block_group_ro(bg X)

   btrfs_start_delalloc_roots()
     __start_delalloc_inodes()
       --> does nothing, no dealloc ranges
           in the inode's io tree so the
           inode's root is not in the list
           fs_info->delalloc_roots

   btrfs_wait_ordered_roots()
     --> does not find the inode's root in the
         list fs_info->ordered_roots

     --> ends up not waiting for the direct IO
         write started by the task at CPU 2

   relocate_block_group(rc->stage ==
     MOVE_DATA_EXTENTS)

     prepare_to_relocate()
       btrfs_commit_transaction()

     iterates the extent tree, using its
     commit root and moves extents into new
     locations

                                                   btrfs_add_ordered_extent_dio()
                                                     --> now a ordered extent is
                                                         created and added to the
                                                         list root->ordered_extents
                                                         and the root added to the
                                                         list fs_info->ordered_roots
                                                     --> this is too late and the
                                                         task at CPU 1 already
                                                         started the relocation

     btrfs_commit_transaction()

                                                   btrfs_finish_ordered_io()
                                                     btrfs_alloc_reserved_file_extent()
                                                       --> adds delayed data reference
                                                           for the extent allocated
                                                           from bg X

   relocate_block_group(rc->stage ==
     UPDATE_DATA_PTRS)

     prepare_to_relocate()
       btrfs_commit_transaction()
         --> delayed refs are run, so an extent
             item for the allocated extent from
             bg X is added to extent tree
         --> commit roots are switched, so the
             next scan in the extent tree will
             see the extent item

     sees the extent in the extent tree

When this happens the relocation produces the following warning when it
finishes:

[ 7260.832836] ------------[ cut here ]------------
[ 7260.834653] WARNING: CPU: 5 PID: 6765 at fs/btrfs/relocation.c:4318 btrfs_relocate_block_group+0x245/0x2a1 [btrfs]()
[ 7260.838268] Modules linked in: btrfs crc32c_generic xor ppdev raid6_pq psmouse sg acpi_cpufreq evdev i2c_piix4 tpm_tis serio_raw tpm i2c_core pcspkr parport_pc
[ 7260.850935] CPU: 5 PID: 6765 Comm: btrfs Not tainted 4.5.0-rc6-btrfs-next-28+ #1
[ 7260.852998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 7260.852998]  0000000000000000 ffff88020bf57bc0 ffffffff812648b3 0000000000000000
[ 7260.852998]  0000000000000009 ffff88020bf57bf8 ffffffff81051608 ffffffffa03c1b2d
[ 7260.852998]  ffff8800b2bbb800 0000000000000000 ffff8800b17bcc58 ffff8800399dd000
[ 7260.852998] Call Trace:
[ 7260.852998]  [<ffffffff812648b3>] dump_stack+0x67/0x90
[ 7260.852998]  [<ffffffff81051608>] warn_slowpath_common+0x99/0xb2
[ 7260.852998]  [<ffffffffa03c1b2d>] ? btrfs_relocate_block_group+0x245/0x2a1 [btrfs]
[ 7260.852998]  [<ffffffff810516d4>] warn_slowpath_null+0x1a/0x1c
[ 7260.852998]  [<ffffffffa03c1b2d>] btrfs_relocate_block_group+0x245/0x2a1 [btrfs]
[ 7260.852998]  [<ffffffffa039d9de>] btrfs_relocate_chunk.isra.29+0x66/0xdb [btrfs]
[ 7260.852998]  [<ffffffffa039f314>] btrfs_balance+0xde1/0xe4e [btrfs]
[ 7260.852998]  [<ffffffff8127d671>] ? debug_smp_processor_id+0x17/0x19
[ 7260.852998]  [<ffffffffa03a9583>] btrfs_ioctl_balance+0x255/0x2d3 [btrfs]
[ 7260.852998]  [<ffffffffa03ac96a>] btrfs_ioctl+0x11e0/0x1dff [btrfs]
[ 7260.852998]  [<ffffffff811451df>] ? handle_mm_fault+0x443/0xd63
[ 7260.852998]  [<ffffffff81491817>] ? _raw_spin_unlock+0x31/0x44
[ 7260.852998]  [<ffffffff8108b36a>] ? arch_local_irq_save+0x9/0xc
[ 7260.852998]  [<ffffffff811876ab>] vfs_ioctl+0x18/0x34
[ 7260.852998]  [<ffffffff81187cb2>] do_vfs_ioctl+0x550/0x5be
[ 7260.852998]  [<ffffffff81190c30>] ? __fget_light+0x4d/0x71
[ 7260.852998]  [<ffffffff81187d77>] SyS_ioctl+0x57/0x79
[ 7260.852998]  [<ffffffff81492017>] entry_SYSCALL_64_fastpath+0x12/0x6b
[ 7260.893268] ---[ end trace eb7803b24ebab8ad ]---

This is because at the end of the first stage, in relocate_block_group(),
we commit the current transaction, which makes delayed refs run, the
commit roots are switched and so the second stage will find the extent
item that the ordered extent added to the delayed refs. But this extent
was not moved (ordered extent completed after first stage finished), so
at the end of the relocation our block group item still has a positive
used bytes counter, triggering a warning at the end of
btrfs_relocate_block_group(). Later on when trying to read the extent
contents from disk we hit a BUG_ON() due to the inability to map a block
with a logical address that belongs to the block group we relocated and
is no longer valid, resulting in the following trace:

[ 7344.885290] BTRFS critical (device sdi): unable to find logical 12845056 len 4096
[ 7344.887518] ------------[ cut here ]------------
[ 7344.888431] kernel BUG at fs/btrfs/inode.c:1833!
[ 7344.888431] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 7344.888431] Modules linked in: btrfs crc32c_generic xor ppdev raid6_pq psmouse sg acpi_cpufreq evdev i2c_piix4 tpm_tis serio_raw tpm i2c_core pcspkr parport_pc
[ 7344.888431] CPU: 0 PID: 6831 Comm: od Tainted: G        W       4.5.0-rc6-btrfs-next-28+ #1
[ 7344.888431] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 7344.888431] task: ffff880215818600 ti: ffff880204684000 task.ti: ffff880204684000
[ 7344.888431] RIP: 0010:[<ffffffffa037c88c>]  [<ffffffffa037c88c>] btrfs_merge_bio_hook+0x54/0x6b [btrfs]
[ 7344.888431] RSP: 0018:ffff8802046878f0  EFLAGS: 00010282
[ 7344.888431] RAX: 00000000ffffffea RBX: 0000000000001000 RCX: 0000000000000001
[ 7344.888431] RDX: ffff88023ec0f950 RSI: ffffffff8183b638 RDI: 00000000ffffffff
[ 7344.888431] RBP: ffff880204687908 R08: 0000000000000001 R09: 0000000000000000
[ 7344.888431] R10: ffff880204687770 R11: ffffffff82f2d52d R12: 0000000000001000
[ 7344.888431] R13: ffff88021afbfee8 R14: 0000000000006208 R15: ffff88006cd199b0
[ 7344.888431] FS:  00007f1f9e1d6700(0000) GS:ffff88023ec00000(0000) knlGS:0000000000000000
[ 7344.888431] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7344.888431] CR2: 00007f1f9dc8cb60 CR3: 000000023e3b6000 CR4: 00000000000006f0
[ 7344.888431] Stack:
[ 7344.888431]  0000000000001000 0000000000001000 ffff880204687b98 ffff880204687950
[ 7344.888431]  ffffffffa0395c8f ffffea0004d64d48 0000000000000000 0000000000001000
[ 7344.888431]  ffffea0004d64d48 0000000000001000 0000000000000000 0000000000000000
[ 7344.888431] Call Trace:
[ 7344.888431]  [<ffffffffa0395c8f>] submit_extent_page+0xf5/0x16f [btrfs]
[ 7344.888431]  [<ffffffffa03970ac>] __do_readpage+0x4a0/0x4f1 [btrfs]
[ 7344.888431]  [<ffffffffa039680d>] ? btrfs_create_repair_bio+0xcb/0xcb [btrfs]
[ 7344.888431]  [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs]
[ 7344.888431]  [<ffffffff8108df55>] ? trace_hardirqs_on+0xd/0xf
[ 7344.888431]  [<ffffffffa039728c>] __do_contiguous_readpages.constprop.26+0xc2/0xe4 [btrfs]
[ 7344.888431]  [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs]
[ 7344.888431]  [<ffffffffa039739b>] __extent_readpages.constprop.25+0xed/0x100 [btrfs]
[ 7344.888431]  [<ffffffff81129d24>] ? lru_cache_add+0xe/0x10
[ 7344.888431]  [<ffffffffa0397ea8>] extent_readpages+0x160/0x1aa [btrfs]
[ 7344.888431]  [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs]
[ 7344.888431]  [<ffffffff8115daad>] ? alloc_pages_current+0xa9/0xcd
[ 7344.888431]  [<ffffffffa037cdc9>] btrfs_readpages+0x1f/0x21 [btrfs]
[ 7344.888431]  [<ffffffff81128316>] __do_page_cache_readahead+0x168/0x1fc
[ 7344.888431]  [<ffffffff811285a0>] ondemand_readahead+0x1f6/0x207
[ 7344.888431]  [<ffffffff811285a0>] ? ondemand_readahead+0x1f6/0x207
[ 7344.888431]  [<ffffffff8111cf34>] ? pagecache_get_page+0x2b/0x154
[ 7344.888431]  [<ffffffff8112870e>] page_cache_sync_readahead+0x3d/0x3f
[ 7344.888431]  [<ffffffff8111dbf7>] generic_file_read_iter+0x197/0x4e1
[ 7344.888431]  [<ffffffff8117773a>] __vfs_read+0x79/0x9d
[ 7344.888431]  [<ffffffff81178050>] vfs_read+0x8f/0xd2
[ 7344.888431]  [<ffffffff81178a38>] SyS_read+0x50/0x7e
[ 7344.888431]  [<ffffffff81492017>] entry_SYSCALL_64_fastpath+0x12/0x6b
[ 7344.888431] Code: 8d 4d e8 45 31 c9 45 31 c0 48 8b 00 48 c1 e2 09 48 8b 80 80 fc ff ff 4c 89 65 e8 48 8b b8 f0 01 00 00 e8 1d 42 02 00 85 c0 79 02 <0f> 0b 4c 0
[ 7344.888431] RIP  [<ffffffffa037c88c>] btrfs_merge_bio_hook+0x54/0x6b [btrfs]
[ 7344.888431]  RSP <ffff8802046878f0>
[ 7344.970544] ---[ end trace eb7803b24ebab8ae ]---

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>

Btrfs: don't wait for unrelated IO to finish before relocation

Before the relocation process of a block group starts, it sets the block
group to readonly mode, then flushes all delalloc writes and then finally
it waits for all ordered extents to complete. This last step includes
waiting for ordered extents destinated at extents allocated in other block
groups, making us waste unecessary time.

So improve this by waiting only for ordered extents that fall into the
block group's range.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>

Btrfs: fix empty symlink after creating symlink and fsync parent dir

If we create a symlink, fsync its parent directory, crash/power fail and
mount the filesystem, we end up with an empty symlink, which not only is
useless it's also not allowed in linux (the man page symlink(2) is well
explicit about that).  So we just need to make sure to fully log an inode
if it's a symlink, to ensure its inline extent gets logged, ensuring the
same behaviour as ext3, ext4, xfs, reiserfs, f2fs, nilfs2, etc.

Example reproducer:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt
  $ mkdir /mnt/testdir
  $ sync
  $ ln -s /mnt/foo /mnt/testdir/bar
  $ xfs_io -c fsync /mnt/testdir
  <power fail>
  $ mount /dev/sdb /mnt
  $ readlink /mnt/testdir/bar
  <empty string>

A test case for fstests follows soon.

Signed-off-by: Filipe Manana <fdmanana@suse.com>

Btrfs: fix for incorrect directory entries after fsync log replay

If we move a directory to a new parent and later log that parent and don't
explicitly log the old parent, when we replay the log we can end up with
entries for the moved directory in both the old and new parent directories.
Besides being ilegal to have directories with multiple hard links in linux,
it also resulted in the leaving the inode item with a link count of 1.
A similar issue also happens if we move a regular file - after the log tree
is replayed the file has a link in both the old and new parent directories,
when it should be only at the new directory.

Sample reproducer:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ mkdir /mnt/x
  $ mkdir /mnt/y
  $ touch /mnt/x/foo
  $ mkdir /mnt/y/z
  $ sync
  $ ln /mnt/x/foo /mnt/x/bar
  $ mv /mnt/y/z /mnt/x/z
  < power fail >
  $ mount /dev/sdc /mnt
  $ ls -1Ri /mnt
  /mnt:
  257 x
  258 y

  /mnt/x:
  259 bar
  259 foo
  260 z

  /mnt/x/z:

  /mnt/y:
  260 z

  /mnt/y/z:

  $ umount /dev/sdc
  $ btrfs check /dev/sdc
  Checking filesystem on /dev/sdc
  UUID: a67e2c4a-a4b4-4fdc-b015-9d9af1e344be
  checking extents
  checking free space cache
  checking fs roots
  root 5 inode 260 errors 2000, link count wrong
        unresolved ref dir 257 index 4 namelen 1 name z filetype 2 errors 0
        unresolved ref dir 258 index 2 namelen 1 name z filetype 2 errors 0
  (...)

Attempting to remove the directory becomes impossible:

  $ mount /dev/sdc /mnt
  $ rmdir /mnt/y/z
  $ ls -lh /mnt/y
  ls: cannot access /mnt/y/z: No such file or directory
  total 0
  d????????? ? ? ? ?            ? z
  $ rmdir /mnt/x/z
  rmdir: failed to remove ‘/mnt/x/z’: Stale file handle
  $ ls -lh /mnt/x
  ls: cannot access /mnt/x/z: Stale file handle
  total 0
  -rw-r--r-- 2 root root 0 Apr  6 18:06 bar
  -rw-r--r-- 2 root root 0 Apr  6 18:06 foo
  d????????? ? ?    ?    ?            ? z

So make sure that on rename we set the last_unlink_trans value for our
inode, even if it's a directory, to the value of the current transaction's
ID and that if the new parent directory is logged that we fallback to a
transaction commit.

A test case for fstests is being submitted as well.

Signed-off-by: Filipe Manana <fdmanana@suse.com>

btrfs: build fixup for qgroup_account_snapshot

The macro btrfs_std_error got renamed to btrfs_handle_fs_error in an
independent branch for the same merge target (4.7). To make the code
compilable for bisectability reasons, add a temporary stub.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: qgroup: Fix qgroup accounting when creating snapshot

Current btrfs qgroup design implies a requirement that after calling
btrfs_qgroup_account_extents() there must be a commit root switch.

Normally this is OK, as btrfs_qgroup_accounting_extents() is only called
inside btrfs_commit_transaction() just be commit_cowonly_roots().

However there is a exception at create_pending_snapshot(), which will
call btrfs_qgroup_account_extents() but no any commit root switch.

In case of creating a snapshot whose parent root is itself (create a
snapshot of fs tree), it will corrupt qgroup by the following trace:
(skipped unrelated data)
======
btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1
qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0
qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384
btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0
======

The problem here is in first qgroup_account_extent(), the
nr_new_roots of the extent is 1, which means its reference got
increased, and qgroup increased its rfer and excl.

But at second qgroup_account_extent(), its reference got decreased, but
between these two qgroup_account_extent(), there is no switch roots.
This leads to the same nr_old_roots, and this extent just got ignored by
qgroup, which means this extent is wrongly accounted.

Fix it by call commit_cowonly_roots() after qgroup_account_extent() in
create_pending_snapshot(), with needed preparation.

Mark: I added a check at the top of qgroup_account_snapshot() to skip this
code if qgroups are turned off. xfstest btrfs/122 exposes this problem.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: fix fspath error deallocation

Make sure to deallocate fspath with vfree() in case of error in
init_ipath().

fspath is allocated with vmalloc() in init_data_container() since
commit 425d17a290c0 ("Btrfs: use larger limit for translation of logical to
inode").

Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make find_workspace warn if there are no workspaces

Be verbose if there are no workspaces at all, ie. the module init time
preallocation failed.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make find_workspace always succeed

With just one preallocated workspace we can guarantee forward progress
even if there's no memory available for new workspaces. The cost is more
waiting but we also get rid of several error paths.

On average, there will be several idle workspaces, so the waiting
penalty won't be so bad.

In the worst case, all cpus will compete for one workspace until there's
some memory. Attempts to allocate a new one are done each time the
waiters are woken up.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: preallocate compression workspaces

Preallocate one workspace for each compression type so we can guarantee
forward progress in the worst case. A failure cannot be a hard error as
we might not use compression at all on the filesystem. If we can't
allocate the workspaces later when need them, it might actually
deadlock, but in such situation the system has effectively not enough
memory to operate properly.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename and document compression workspace members

The names are confusing, pick more fitting names and add comments.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: GFP_NOFS does not GFP_HIGHMEM

Masking HIGHMEM out of NOFS does not make sense.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: switch to common message helpers in open_ctree, adjust messages

Currently we lack the identification of the filesystem in most if not
all mount messages, done via printk/pr_* functions. We can use the
btrfs_* helpers in open_ctree, as the fs_info <-> sb link is established
at the beginning of the function.

The messages have been updated at the same time to be more consistent:

* dropped sb->s_id, as it's not available via btrfs_*
* added %d for return code where appropriate
* wording changed
* %Lx replaced by %llx

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix int32 overflow in shrink_delalloc().

UBSAN: Undefined behaviour in fs/btrfs/extent-tree.c:4623:21
signed integer overflow:
10808 * 262144 cannot be represented in type 'int [8]'

If 8192<=items<16384, we request a writeback of an insane number of pages
which is benign (everything will be written). But if items>=16384, the
space reservation won't be enough.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Linux 4.6-rc7

Merge tag 'char-misc-4.6-rc7' of git://git./linux/kernel/git/gregkh/char-misc

Pull misc driver fixes from Gfreg KH:
"Here are three small fixes for some driver problems that were
  reported.  Full details in the shortlog below.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: mxs-ocotp: fix buffer overflow in read
  Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()
  misc: mic: Fix for double fetch security bug in VOP driver

Merge tag 'staging-4.6-rc7' of git://git./linux/kernel/git/gregkh/staging

Pull IIO driver fixes from Grek KH:
"It's really just IIO drivers here, some small fixes that resolve some
  'crash on boot' errors that have shown up in the -rc series, and other
  bugfixes that are required.

  All have been in linux-next with no reported problems"

* tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: mpu6050: Fix name/chip_id when using ACPI
  iio: imu: mpu6050: fix possible NULL dereferences
  iio:adc:at91-sama5d2: Repair crash on module removal
  iio: ak8975: fix maybe-uninitialized warning
  iio: ak8975: Fix NULL pointer exception on early interrupt

Merge tag 'usb-4.6-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some last-remaining fixes for USB drivers to resolve issues
  that have shown up in testing.  And two new device ids as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping"
  usb: musb: jz4740: fix error check of usb_get_phy()
  Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half"
  usb: musb: gadget: nuke endpoint before setting its descriptor to NULL
  USB: serial: cp210x: add Straizona Focusers device ids
  USB: serial: cp210x: add ID for Link ECU

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"These are a number of updates to fix a few problems found in the ARM
  nommu code over the last couple of years, caused mostly by changes on
  the mmu side"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8573/1: domain: move {set,get}_domain under config guard
  ARM: 8572/1: nommu: change memory reserve for the vectors
  ARM: 8571/1: nommu: fix PMSAv7 setup

Merge tag 'media/v4.6-5' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

  - deadlock fixes on driver probe at exynos4-is and s43-camif drivers

  - a build breakage if media controller is enabled and USB or PCI is
   built as module.

* tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media-device: fix builds when USB or PCI is compiled as module
  [media] media: s3c-camif: fix deadlock on driver probe()
  [media] media: exynos4-is: fix deadlock on driver probe

Merge branch 'for-4.6-fixes' of git://git./linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
"An ahci driver addition and updates to ahci port enable handling for
  some platform devices"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: add AMD Seattle platform driver
  ARM: dts: apq8064: add ahci ports-implemented mask
  ata: ahci-platform: Add ports-implemented DT bindings.
  libahci: save port map for forced port map

Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma fix from Doug Ledford:
"Fix for max sector calculation in iSER"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/iser: Fix max_sectors calculation

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull writeback fix from Jens Axboe:
"Just a single fix for domain aware writeback, fixing a regression that
  can cause balance_dirty_pages() to keep looping while not getting any
  work done"

* 'for-linus' of git://git.kernel.dk/linux-block:
  writeback: Fix performance regression in wb_over_bg_thresh()

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"This contains two fixes: a boot fix for older SGI/UV systems, and an
  APIC calibration fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
  x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_init

Merge tag 'pm+acpi-4.6-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
"Fixes for problems introduced or discovered recently (intel_pstate,
  sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework,
  generic device properties framework) and one fix for a hotplug-related
  deadlock in ACPICA that's been there forever, but is nasty enough.

  Specifics:

   - Fix for a recent regression in the intel_pstate driver causing it
     to fail to restore the HWP (HW-managed P-states) configuration of
     the boot CPU after suspend-to-RAM (Rafael Wysocki).

   - Fix for two recent regressions in the intel_pstate driver, one that
     can trigger a divide by zero if the driver is accessed via sysfs
     before it manages to take the first sample and one causing it to
     fail to update a structure field used in a trace point, so the
     information coming from it is less useful (Rafael Wysocki).

   - Fix for a problem in the sti-cpufreq driver introduced during the
     4.5 cycle that causes it to break CPU PM in multi-platform kernels
     by registering cpufreq-dt (which subsequently doesn't work)
     unconditionally and preventing the driver that would actually work
     from registering (Sudeep Holla).

   - Stable-candidate fix for an ARM64 cpuidle issue causing idle state
     usage counters to be incorrectly updated for idle states that were
     not entered due to errors (James Morse).

   - Fix for a recently introduced issue in the OPP (Operating
     Performance Points) framework causing it to print bogus error
     messages for missing optional regulators (Viresh Kumar).

   - Fix for a recently introduced issue in the generic device
     properties framework that may cause it to attempt to dereferece and
     invalid pointer in some cases (Heikki Krogerus).

   - Fix for a deadlock in the ACPICA core that may be triggered by
     device (eg Thunderbolt) hotplug (Prarit Bhargava)"

* tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Remove useless check
  ACPICA: Dispatcher: Update thread ID for recursive method calls
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
  device property: Avoid potential dereferences of invalid pointers

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Ingo Molnar:
"This contains a single fix that fixes a nohz tick stopping bug when
mixed-poliocy SCHED_FIFO and SCHED_RR tasks are present on a runqueue"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz/full, sched/rt: Fix missed tick-reenabling bug in sched_can_stop_tick()

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"This tree contains two fixes: new Intel CPU model numbers and an
  AMD/iommu uncore PMU driver fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUs
  perf/x86: Add model numbers for Kabylake CPUs

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
"This tree contains three fixes: a console spam fix, a file pattern fix
  and a sysfb_efi fix for a bug that triggered on older ThinkPads"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sysfb_efi: Fix valid BAR address range check
  x86/efi-bgrt: Switch all pr_err() to pr_notice() for invalid BGRT
  MAINTAINERS: Remove asterisk from EFI directory names

Merge branch 'parisc-4.6-5' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fix from Helge Deller:
"Patch from Dmitry V Levin to fix a kernel crash when a straced process
calls the (invalid) syscall which is equal to value of __NR_Linux_syscalls"

* 'parisc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls

Merge tag 'arc-4.6-rc7-fixes' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:
"Late in the cycle, but this has fixes for couple of issues: a PAE40
  boot crash and Arnd spotting lack of barriers in BE io-accessors.

  The 3rd patch for enabling highmem in low physical mem ;-) honestly is
  more than a "fix" but its been in works for some time, seems to be
  stable in testing and enables 2 of our customers to go forward with
  4.6 kernel.

   - Fix for PTE truncation in PAE40 builds
   - Fix for big endian IO accessors lacking IO barrier
   - Allow HIGHMEM to work with low physical addresses"

* tag 'arc-4.6-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: support HIGHMEM even without PAE40
  ARC: Fix PAE40 boot failures due to PTE truncation
  ARC: Add missing io barriers to io{read,write}{16,32}be()

Merge tag 'powerpc-4.6-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
"Fix bad inline asm constraint in create_zero_mask() from Anton
Blanchard"

* tag 'powerpc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix bad inline asm constraint in create_zero_mask()

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"Fixes for i915, amdgpu/radeon and imx.

  The IMX fix is for an autoloading regression found in Fedora.  The
  radeon fixes, are the same fix to amdgpu/radeon to avoid a hardware
  lockup in some circumstances with a bad mode, and a double free bug I
  took a few hours chasing down the other morning.

  The i915 fixes are across the board, all stable material, and fixing
  some hangs and suspend/resume issues, along with a live status
  regressions"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading
  drm/amdgpu: make sure vertical front porch is at least 1
  drm/radeon: make sure vertical front porch is at least 1
  drm/amdgpu: set metadata pointer to NULL after freeing.
  drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
  drm/i915: Fake HDMI live status
  drm/i915: Fix eDP low vswing for Broadwell
  drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
  drm/i915: Fix system resume if PCI device remained enabled
  drm/i915: Avoid stalling on pending flips for legacy cursor updates

btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes

During a mount, we start the cleaner kthread first because the transaction
kthread wants to wake up the cleaner kthread.  We start the transaction
kthread next because everything in btrfs wants transactions.  We do reloc
recovery in the thread that was doing the original mount call once the
transaction kthread is running.  This means that the cleaner kthread
could already be running when reloc recovery happens (e.g. if a snapshot
delete was started before a crash).

Relocation does not play well with the cleaner kthread, so a mutex was
added in commit 5f3164813b90f7dbcb5c3ab9006906222ce471b7 "Btrfs: fix
race between balance recovery and root deletion" to prevent both from
being active at the same time.

If the cleaner kthread is already holding the mutex by the time we get
to btrfs_recover_relocation, the mount will be blocked until at least
one deleted subvolume is cleaned (possibly more if the mount process
doesn't get the lock right away).  During this time (which could be an
arbitrarily long time on a large/slow filesystem), the mount process is
stuck and the filesystem is unnecessarily inaccessible.

Fix this by locking cleaner_mutex before we start cleaner_kthread, and
unlocking the mutex after mount no longer requires it.  This ensures
that the mounting process will not be blocked by the cleaner kthread.
The cleaner kthread is already prepared for mutex contention and will
just go to sleep until the mutex is available.

Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: ioctl: reorder exclusive op check in RM_DEV

Move the op exclusivity check before the other code (same as in
ADD_DEV).

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add write protection to SET_FEATURES ioctl

Perform the want_write check if we get far enough to do any writes.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix lock dep warning move scratch super outside of chunk_mutex

Move scratch super outside of the chunk lock to avoid below
lockdep warning. The better place to scratch super is in
the function btrfs_rm_dev_replace_free_srcdev() just before
free_device, which is outside of the chunk lock as well.

To reproduce:
  (fresh boot)
  mkfs.btrfs -f -draid5 -mraid5 /dev/sdc /dev/sdd /dev/sde
  mount /dev/sdc /btrfs
  dd if=/dev/zero of=/btrfs/tf1 bs=4096 count=100
  (get devmgt from https://github.com/asj/devmgt.git)
  devmgt detach /dev/sde
  dd if=/dev/zero of=/btrfs/tf1 bs=4096 count=100
  sync
  btrfs replace start -Brf 3 /dev/sdf /btrfs <--
  devmgt attach host7

======================================================
[ INFO: possible circular locking dependency detected ]
4.6.0-rc2asj+ #1 Not tainted
---------------------------------------------------

btrfs/2174 is trying to acquire lock:
(sb_writers){.+.+.+}, at:
[<ffffffff812449b4>] __sb_start_write+0xb4/0xf0

but task is already holding lock:
(&fs_info->chunk_mutex){+.+.+.}, at:
[<ffffffffa05c5f55>] btrfs_dev_replace_finishing+0x145/0x980 [btrfs]

which lock already depends on the new lock.

Chain exists of:
sb_writers --> &fs_devs->device_list_mutex --> &fs_info->chunk_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
lock(&fs_info->chunk_mutex);
lock(sb_writers);

*** DEADLOCK ***

-> #0 (sb_writers){.+.+.+}:
[<ffffffff810e6415>] __lock_acquire+0x1bc5/0x1ee0
[<ffffffff810e707e>] lock_acquire+0xbe/0x210
[<ffffffff810df49a>] percpu_down_read+0x4a/0xa0
[<ffffffff812449b4>] __sb_start_write+0xb4/0xf0
[<ffffffff81265534>] mnt_want_write+0x24/0x50
[<ffffffff812508a2>] path_openat+0x952/0x1190
[<ffffffff81252451>] do_filp_open+0x91/0x100
[<ffffffff8123f5cc>] file_open_name+0xfc/0x140
[<ffffffff8123f643>] filp_open+0x33/0x60
[<ffffffffa0572bb6>] update_dev_time+0x16/0x40 [btrfs]
[<ffffffffa057f60d>] btrfs_scratch_superblocks+0x5d/0xb0 [btrfs]
[<ffffffffa057f70e>] btrfs_rm_dev_replace_remove_srcdev+0xae/0xd0 [btrfs]
[<ffffffffa05c62c5>] btrfs_dev_replace_finishing+0x4b5/0x980 [btrfs]
[<ffffffffa05c6ae8>] btrfs_dev_replace_start+0x358/0x530 [btrfs]

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: Fix BUG_ON condition in scrub_setup_recheck_block()

pagev array in scrub_block{} is of size SCRUB_MAX_PAGES_PER_BLOCK.
page_index should be checked with the same to trigger BUG_ON().

Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: remove BUG_ON()'s in btrfs_map_block

btrfs_map_block can go horribly wrong in the face of fs corruption, lets agree
to not be assholes and panic at any possible chance things are all fucked up.

Signed-off-by: Josef Bacik <jbacik@fb.com>
[ removed type casts ]
Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: fix divide error upon chunk's stripe_len

The struct 'map_lookup' uses type int for @stripe_len, while
btrfs_chunk_stripe_len() can return a u64 value, and it may end up with
@stripe_len being undefined value and it can lead to 'divide error' in
__btrfs_map_block().

This changes 'map_lookup' to use type u64 for stripe_len, also right now
we only use BTRFS_STRIPE_LEN for stripe_len, so this adds a valid checker for
BTRFS_STRIPE_LEN.

Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ folded division fix to scrub_raid56_parity ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: sysfs: protect reading label by lock

If the label setting ioctl races with sysfs label handler, we could get
mixed result in the output, part old part new. We should either get the
old or new label. The chances to hit this race are low.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add check to sysfs handler of label

Add a sanity check for the fs_info as we will dereference it, similar to
what the 'store features' handler does.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add read-only check to sysfs handler of features

We don't want to trigger the change on a read-only filesystem, similar
to what the label handler does.

Signed-off-by: David Sterba <dsterba@suse.cz>

btrfs: reuse existing variable in scrub_stripe, reduce stack usage

The key variable occupies 17 bytes, the key_start is used once, we can
simply reuse existing 'key' for that purpose. As the key is not a simple
type, compiler doest not do it on itself.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use dynamic allocation for root item in create_subvol

The size of root item is more than 400 bytes, which is quite a lot of
stack space. As we do IO from inside the subvolume ioctls, we should
keep the stack usage low in case the filesystem is on top of other
layers (NFS, device mapper, iscsi, etc).

Reviewed-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: clone: use vmalloc only as fallback for nodesize bufer

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: use vmalloc only as fallback for clone_sources_tmp

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: use vmalloc only as fallback for clone_roots

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: use temporary variable to store allocation size

We're going to use the argument multiple times later.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: use vmalloc only as fallback for read_buf

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: use vmalloc only as fallback for send_buf

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix lock dep warning, move scratch dev out of device_list_mutex and uuid_mutex

When the replace target fails, the target device will be taken
out of fs device list, scratch + update_dev_time and freed. However
we could do the scratch  + update_dev_time and free part after the
device has been taken out of device list, so that we don't have to
hold the device_list_mutex and uuid_mutex locks.

Reported issue:

[ 5375.718845] ======================================================
[ 5375.718846] [ INFO: possible circular locking dependency detected ]
[ 5375.718849] 4.4.5-scst31x-debug-11+ #40 Not tainted
[ 5375.718849] -------------------------------------------------------
[ 5375.718851] btrfs-health/4662 is trying to acquire lock:
[ 5375.718861]  (sb_writers){.+.+.+}, at: [<ffffffff812214f7>] __sb_start_write+0xb7/0xf0
[ 5375.718862]
[ 5375.718862] but task is already holding lock:
[ 5375.718907]  (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa028263c>] btrfs_destroy_dev_replace_tgtdev+0x3c/0x150 [btrfs]
[ 5375.718907]
[ 5375.718907] which lock already depends on the new lock.
[ 5375.718907]
[ 5375.718908]
[ 5375.718908] the existing dependency chain (in reverse order) is:
[ 5375.718911]
[ 5375.718911] -> #3 (&fs_devs->device_list_mutex){+.+.+.}:
[ 5375.718917]        [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.718921]        [<ffffffff81633949>] mutex_lock_nested+0x69/0x3c0
[ 5375.718940]        [<ffffffffa0219bf6>] btrfs_show_devname+0x36/0x210 [btrfs]
[ 5375.718945]        [<ffffffff81267079>] show_vfsmnt+0x49/0x150
[ 5375.718948]        [<ffffffff81240b07>] m_show+0x17/0x20
[ 5375.718951]        [<ffffffff81246868>] seq_read+0x2d8/0x3b0
[ 5375.718955]        [<ffffffff8121df28>] __vfs_read+0x28/0xd0
[ 5375.718959]        [<ffffffff8121e806>] vfs_read+0x86/0x130
[ 5375.718962]        [<ffffffff8121f4c9>] SyS_read+0x49/0xa0
[ 5375.718966]        [<ffffffff81637976>] entry_SYSCALL_64_fastpath+0x16/0x7a
[ 5375.718968]
[ 5375.718968] -> #2 (namespace_sem){+++++.}:
[ 5375.718971]        [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.718974]        [<ffffffff81635199>] down_write+0x49/0x80
[ 5375.718977]        [<ffffffff81243593>] lock_mount+0x43/0x1c0
[ 5375.718979]        [<ffffffff81243c13>] do_add_mount+0x23/0xd0
[ 5375.718982]        [<ffffffff81244afb>] do_mount+0x27b/0xe30
[ 5375.718985]        [<ffffffff812459dc>] SyS_mount+0x8c/0xd0
[ 5375.718988]        [<ffffffff81637976>] entry_SYSCALL_64_fastpath+0x16/0x7a
[ 5375.718991]
[ 5375.718991] -> #1 (&sb->s_type->i_mutex_key#5){+.+.+.}:
[ 5375.718994]        [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.718996]        [<ffffffff81633949>] mutex_lock_nested+0x69/0x3c0
[ 5375.719001]        [<ffffffff8122d608>] path_openat+0x468/0x1360
[ 5375.719004]        [<ffffffff8122f86e>] do_filp_open+0x7e/0xe0
[ 5375.719007]        [<ffffffff8121da7b>] do_sys_open+0x12b/0x210
[ 5375.719010]        [<ffffffff8121db7e>] SyS_open+0x1e/0x20
[ 5375.719013]        [<ffffffff81637976>] entry_SYSCALL_64_fastpath+0x16/0x7a
[ 5375.719015]
[ 5375.719015] -> #0 (sb_writers){.+.+.+}:
[ 5375.719018]        [<ffffffff810d97ca>] __lock_acquire+0x17ba/0x1ae0
[ 5375.719021]        [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.719026]        [<ffffffff810d3bef>] percpu_down_read+0x4f/0xa0
[ 5375.719028]        [<ffffffff812214f7>] __sb_start_write+0xb7/0xf0
[ 5375.719031]        [<ffffffff81242eb4>] mnt_want_write+0x24/0x50
[ 5375.719035]        [<ffffffff8122ded2>] path_openat+0xd32/0x1360
[ 5375.719037]        [<ffffffff8122f86e>] do_filp_open+0x7e/0xe0
[ 5375.719040]        [<ffffffff8121d8a4>] file_open_name+0xe4/0x130
[ 5375.719043]        [<ffffffff8121d923>] filp_open+0x33/0x60
[ 5375.719073]        [<ffffffffa02776a6>] update_dev_time+0x16/0x40 [btrfs]
[ 5375.719099]        [<ffffffffa02825be>] btrfs_scratch_superblocks+0x4e/0x90 [btrfs]
[ 5375.719123]        [<ffffffffa0282665>] btrfs_destroy_dev_replace_tgtdev+0x65/0x150 [btrfs]
[ 5375.719150]        [<ffffffffa02c6c80>] btrfs_dev_replace_finishing+0x6b0/0x990 [btrfs]
[ 5375.719175]        [<ffffffffa02c729e>] btrfs_dev_replace_start+0x33e/0x540 [btrfs]
[ 5375.719199]        [<ffffffffa02c7f58>] btrfs_auto_replace_start+0xf8/0x140 [btrfs]
[ 5375.719222]        [<ffffffffa02464e6>] health_kthread+0x246/0x490 [btrfs]
[ 5375.719225]        [<ffffffff810a70df>] kthread+0xef/0x110
[ 5375.719229]        [<ffffffff81637d2f>] ret_from_fork+0x3f/0x70
[ 5375.719230]
[ 5375.719230] other info that might help us debug this:
[ 5375.719230]
[ 5375.719233] Chain exists of:
[ 5375.719233]   sb_writers --> namespace_sem --> &fs_devs->device_list_mutex
[ 5375.719233]
[ 5375.719234]  Possible unsafe locking scenario:
[ 5375.719234]
[ 5375.719234]        CPU0                    CPU1
[ 5375.719235]        ----                    ----
[ 5375.719236]   lock(&fs_devs->device_list_mutex);
[ 5375.719238]                                lock(namespace_sem);
[ 5375.719239]                                lock(&fs_devs->device_list_mutex);
[ 5375.719241]   lock(sb_writers);
[ 5375.719241]
[ 5375.719241]  *** DEADLOCK ***
[ 5375.719241]
[ 5375.719243] 4 locks held by btrfs-health/4662:
[ 5375.719266]  #0:  (&fs_info->health_mutex){+.+.+.}, at: [<ffffffffa0246303>] health_kthread+0x63/0x490 [btrfs]
[ 5375.719293]  #1:  (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.+.}, at: [<ffffffffa02c6611>] btrfs_dev_replace_finishing+0x41/0x990 [btrfs]
[ 5375.719319]  #2:  (uuid_mutex){+.+.+.}, at: [<ffffffffa0282620>] btrfs_destroy_dev_replace_tgtdev+0x20/0x150 [btrfs]
[ 5375.719343]  #3:  (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa028263c>] btrfs_destroy_dev_replace_tgtdev+0x3c/0x150 [btrfs]
[ 5375.719343]
[ 5375.719343] stack backtrace:
[ 5375.719347] CPU: 2 PID: 4662 Comm: btrfs-health Not tainted 4.4.5-scst31x-debug-11+ #40
[ 5375.719348] Hardware name: Supermicro SYS-6018R-WTRT/X10DRW-iT, BIOS 1.0c 01/07/2015
[ 5375.719352]  0000000000000000 ffff880856f73880 ffffffff813529e3 ffffffff826182a0
[ 5375.719354]  ffffffff8260c090 ffff880856f738c0 ffffffff810d667c ffff880856f73930
[ 5375.719357]  ffff880861f32b40 ffff880861f32b68 0000000000000003 0000000000000004
[ 5375.719357] Call Trace:
[ 5375.719363]  [<ffffffff813529e3>] dump_stack+0x85/0xc2
[ 5375.719366]  [<ffffffff810d667c>] print_circular_bug+0x1ec/0x260
[ 5375.719369]  [<ffffffff810d97ca>] __lock_acquire+0x17ba/0x1ae0
[ 5375.719373]  [<ffffffff810f606d>] ? debug_lockdep_rcu_enabled+0x1d/0x20
[ 5375.719376]  [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.719378]  [<ffffffff812214f7>] ? __sb_start_write+0xb7/0xf0
[ 5375.719383]  [<ffffffff810d3bef>] percpu_down_read+0x4f/0xa0
[ 5375.719385]  [<ffffffff812214f7>] ? __sb_start_write+0xb7/0xf0
[ 5375.719387]  [<ffffffff812214f7>] __sb_start_write+0xb7/0xf0
[ 5375.719389]  [<ffffffff81242eb4>] mnt_want_write+0x24/0x50
[ 5375.719393]  [<ffffffff8122ded2>] path_openat+0xd32/0x1360
[ 5375.719415]  [<ffffffffa02462a0>] ? btrfs_congested_fn+0x180/0x180 [btrfs]
[ 5375.719418]  [<ffffffff810f606d>] ? debug_lockdep_rcu_enabled+0x1d/0x20
[ 5375.719420]  [<ffffffff8122f86e>] do_filp_open+0x7e/0xe0
[ 5375.719423]  [<ffffffff810f615d>] ? rcu_read_lock_sched_held+0x6d/0x80
[ 5375.719426]  [<ffffffff81201a9b>] ? kmem_cache_alloc+0x26b/0x5d0
[ 5375.719430]  [<ffffffff8122e7d4>] ? getname_kernel+0x34/0x120
[ 5375.719433]  [<ffffffff8121d8a4>] file_open_name+0xe4/0x130
[ 5375.719436]  [<ffffffff8121d923>] filp_open+0x33/0x60
[ 5375.719462]  [<ffffffffa02776a6>] update_dev_time+0x16/0x40 [btrfs]
[ 5375.719485]  [<ffffffffa02825be>] btrfs_scratch_superblocks+0x4e/0x90 [btrfs]
[ 5375.719506]  [<ffffffffa0282665>] btrfs_destroy_dev_replace_tgtdev+0x65/0x150 [btrfs]
[ 5375.719530]  [<ffffffffa02c6c80>] btrfs_dev_replace_finishing+0x6b0/0x990 [btrfs]
[ 5375.719554]  [<ffffffffa02c6b23>] ? btrfs_dev_replace_finishing+0x553/0x990 [btrfs]
[ 5375.719576]  [<ffffffffa02c729e>] btrfs_dev_replace_start+0x33e/0x540 [btrfs]
[ 5375.719598]  [<ffffffffa02c7f58>] btrfs_auto_replace_start+0xf8/0x140 [btrfs]
[ 5375.719621]  [<ffffffffa02464e6>] health_kthread+0x246/0x490 [btrfs]
[ 5375.719641]  [<ffffffffa02463d8>] ? health_kthread+0x138/0x490 [btrfs]
[ 5375.719661]  [<ffffffffa02462a0>] ? btrfs_congested_fn+0x180/0x180 [btrfs]
[ 5375.719663]  [<ffffffff810a70df>] kthread+0xef/0x110
[ 5375.719666]  [<ffffffff810a6ff0>] ? kthread_create_on_node+0x200/0x200
[ 5375.719669]  [<ffffffff81637d2f>] ret_from_fork+0x3f/0x70
[ 5375.719672]  [<ffffffff810a6ff0>] ? kthread_create_on_node+0x200/0x200
[ 5375.719697] ------------[ cut here ]------------

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reported-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: silence an integer overflow warning

The "sizeof(*arg->clone_sources) * arg->clone_sources_count" expression
can overflow. It causes several static checker warnings. It's all
under CAP_SYS_ADMIN so it's not that serious but lets silence the
warnings.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: avoid overflowing f_bfree

Since mixed block groups accounting isn't byte-accurate and f_bree is an
unsigned integer, it could overflow. Avoid this.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Suggested-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix mixed block count of available space

Metadata for mixed block is already accounted in total data and should not
be counted as part of the free metadata space.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=114281
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: allow balancing to dup with multi-device

Currently, we don't allow the user to try and rebalance to a dup profile
on a multi-device filesystem. In most cases, this is a perfectly sensible
restriction as raid1 uses the same amount of space and provides better
protection.

However, when reshaping a multi-device filesystem down to a single device
filesystem, this requires the user to convert metadata and system chunks
to single profile before deleting devices, and then convert again to dup,
which leaves a period of time where metadata integrity is reduced.

This patch removes the single-device-only restriction from converting to
dup profile to remove this potential data integrity reduction.

Signed-off-by: Austin S. Hemmelgarn <ahferroin7@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>

parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls

Do not load one entry beyond the end of the syscall table when the
syscall number of a traced process equals to __NR_Linux_syscalls.
Similar bug with regular processes was fixed by commit 3bb457af4fa8
("[PARISC] Fix bug when syscall nr is __NR_Linux_syscalls").

This bug was found by strace test suite.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>

btrfs: ioctl: reorder exclusive op check in RM_DEV

Move the op exclusivity check before the other code (same as in
ADD_DEV).

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: kill unused writepage_io_hook callback

It seems to be long time unused, since 2008 and
6885f308b5570 ("Btrfs: Misc 2.6.25 updates").

Propagating the removal touches some code but has no functional effect.

Signed-off-by: David Sterba <dsterba@suse.com>

Merge branches 'pm-opp-fixes', 'pm-cpufreq-fixes' and 'pm-cpuidle-fixes'

* pm-opp-fixes:
  PM / OPP: Remove useless check

* pm-cpufreq-fixes:
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform

* pm-cpuidle-fixes:
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value

Merge branches 'acpica-fixes' and 'device-properties-fixes'

* acpica-fixes:
ACPICA: Dispatcher: Update thread ID for recursive method calls

* device-properties-fixes:
device property: Avoid potential dereferences of invalid pointers

x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO

Currently we read the tsc radio: ratio = (MSR_PLATFORM_INFO >> 8) & 0x1f;

Thus we get bit 8-12 of MSR_PLATFORM_INFO, however according to the SDM
(35.5), the ratio bits are bit 8-15.

Ignoring the upper bits can result in an incorrect tsc ratio, which causes the
TSC calibration and the Local APIC timer frequency to be incorrect.

Fix this problem by masking 0xff instead.

[ tglx: Massaged changelog ]

Fixes: 7da7c1561366 "x86, tsc: Add static (MSR) TSC calibration on Intel Atom SoCs"
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org
Cc: Bin Gao <bin.gao@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1462505619-5516-1-git-send-email-yu.c.chen@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
"14 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  byteswap: try to avoid __builtin_constant_p gcc bug
  lib/stackdepot: avoid to return 0 handle
  mm: fix kcompactd hang during memory offlining
  modpost: fix module autoloading for OF devices with generic compatible property
  proc: prevent accessing /proc/<PID>/environ until it's ready
  mm/zswap: provide unique zpool name
  mm: thp: kvm: fix memory corruption in KVM with THP enabled
  MAINTAINERS: fix Rajendra Nayak's address
  mm, cma: prevent nr_isolated_* counters from going negative
  mm: update min_free_kbytes from khugepaged after core initialization
  huge pagecache: mmap_sem is unlocked when truncation splits pmd
  rapidio/mport_cdev: fix uapi type definitions
  mm: memcontrol: let v2 cgroups follow changes in system swappiness
  mm: thp: correct split_huge_pages file permission

mailmap: add John Paul Adrian Glaubitz

Apparently patchwork ended up truncating the full name.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:

- a fix for the persistent memory 'struct page' driver.  The
   implementation overlooked the fact that pages are allocated in 2MB
   units leading to -ENOMEM when establishing some configurations.

   It's tagged for -stable as the problem was introduced with the
   initial implementation in 4.5.

- The new "error status translation" routine, introduced with the 4.6
   updates to the nfit driver, missed a necessary path in
   acpi_nfit_ctl().

   The end result is that we are falsely assuming commands complete
   successfully when the embedded status says otherwise.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit: fix translation of command status results
  libnvdimm, pfn: fix memmap reservation sizing

byteswap: try to avoid __builtin_constant_p gcc bug

This is another attempt to avoid a regression in wwn_to_u64() after that
started using get_unaligned_be64(), which in turn ran into a bug on
gcc-4.9 through 6.1.

The regression got introduced due to the combination of two separate
workarounds (commits e3bde9568d99: "include/linux/unaligned: force
inlining of byteswap operations" and ef3fb2422ffe: "scsi: fc: use
get/put_unaligned64 for wwn access") that each try to sidestep distinct
problems with gcc behavior (code growth and increased stack usage).

Unfortunately after both have been applied, a more serious gcc bug has
been uncovered, leading to incorrect object code that discards part of a
function and causes undefined behavior.

As part of this problem is how __builtin_constant_p gets evaluated on an
argument passed by reference into an inline function, this avoids the
use of __builtin_constant_p() for all architectures that set
CONFIG_ARCH_USE_BUILTIN_BSWAP.  Most architectures do not set
ARCH_SUPPORTS_OPTIMIZED_INLINING, which means they probably do not
suffer from the problem in the qla2xxx driver, but they might still run
into it elsewhere.

Both of the original workarounds were only merged in the 4.6 kernel, and
the bug that is fixed by this patch should only appear if both are
there, so we probably don't need to backport the fix.  On the other
hand, it works by simplifying the code path and should not have any
negative effects.

[arnd@arndb.de: fix older gcc warnings]
  (http://lkml.kernel.org/r/12243652.bxSxEgjgfk@wuerfel)
Link: https://lkml.org/lkml/headers/2016/4/12/1103
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70232
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70646
Fixes: e3bde9568d99 ("include/linux/unaligned: force inlining of byteswap operations")
Fixes: ef3fb2422ffe ("scsi: fc: use get/put_unaligned64 for wwn access")
Link: http://lkml.kernel.org/r/1780465.XdtPJpi8Tt@wuerfel
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> # on gcc-5.3
Tested-by: Quinn Tran <quinn.tran@qlogic.com>
Cc: Martin Jambor <mjambor@suse.cz>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Jan Hubicka <hubicka@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/stackdepot: avoid to return 0 handle

Recently, we allow to save the stacktrace whose hashed value is 0.  It
causes the problem that stackdepot could return 0 even if in success.
User of stackdepot cannot distinguish whether it is success or not so we
need to solve this problem.  In this patch, 1 bit are added to handle
and make valid handle none 0 by setting this bit.  After that, valid
handle will not be 0 and 0 handle will represent failure correctly.

Fixes: 33334e25769c ("lib/stackdepot.c: allow the stack trace hash to be zero")
Link: http://lkml.kernel.org/r/1462252403-1106-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix kcompactd hang during memory offlining

Assume memory47 is the last online block left in node1.  This will hang:

  # echo offline > /sys/devices/system/node/node1/memory47/state

After a couple of minutes, the following pops up in dmesg:

  INFO: task bash:957 blocked for more than 120 seconds.
         Not tainted 4.6.0-rc6+ #6
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  bash            D ffff8800b7adbaf8     0   957    951 0x00000000
  Call Trace:
    schedule+0x35/0x80
    schedule_timeout+0x1ac/0x270
    wait_for_completion+0xe1/0x120
    kthread_stop+0x4f/0x110
    kcompactd_stop+0x26/0x40
    __offline_pages.constprop.28+0x7e6/0x840
    offline_pages+0x11/0x20
    memory_block_action+0x73/0x1d0
    memory_subsys_offline+0x47/0x60
    device_offline+0x86/0xb0
    store_mem_state+0xda/0xf0
    dev_attr_store+0x18/0x30
    sysfs_kf_write+0x37/0x40
    kernfs_fop_write+0x11d/0x170
    __vfs_write+0x37/0x120
    vfs_write+0xa9/0x1a0
    SyS_write+0x55/0xc0
    entry_SYSCALL_64_fastpath+0x1a/0xa4

kcompactd is waiting for kcompactd_max_order > 0 when it's woken up to
actually exit.  Check kthread_should_stop() to break out of the wait.

Fixes: 698b1b306 ("mm, compaction: introduce kcompactd").
Reported-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>