Wei Yongjun [Tue, 21 Aug 2012 08:39:04 +0000 (16:39 +0800)]
Staging: rtl8192u: using random_ether_addr() to generate random MAC
Using random_ether_addr() to generate a random Ethernet
address (MAC) that is not multicast and has the local
assigned bit set. Not need to duplicating its implementation.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Tue, 21 Aug 2012 08:38:45 +0000 (16:38 +0800)]
staging: rtl8192e: using random_ether_addr() to generate random MAC
Using random_ether_addr() to generate a random Ethernet
address (MAC) that is not multicast and has the local
assigned bit set. Not need to duplicating its implementation.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Tue, 21 Aug 2012 08:36:28 +0000 (16:36 +0800)]
staging: rtl8187se: using random_ether_addr() to generate random MAC
Using random_ether_addr() to generate a random Ethernet
address (MAC) that is not multicast and has the local
assigned bit set. Not need to duplicating its implementation.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Tue, 4 Sep 2012 19:24:41 +0000 (00:54 +0530)]
staging: rtl8192e: remove casting of returned pointer from kmalloc
as per Documentation/CodingStyle we dont need to cast the return of
kmalloc
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Tue, 28 Aug 2012 13:10:35 +0000 (21:10 +0800)]
staging: rtl8192e: remove pointless conditional before kfree_skb()
Remove pointless conditional before kfree_skb().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Sun, 26 Aug 2012 05:36:33 +0000 (11:06 +0530)]
staging: rtl8192u: use kzalloc to allocate firmware pointer
the firmware pointer is allocated with kmalloc and memset,
instead we can just do a kzalloc which will return a memory that
has been memset.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Fri, 24 Aug 2012 05:29:09 +0000 (13:29 +0800)]
staging: r8712u: rtl871x_mlme.c: use is_zero_ether_addr() instead of memcmp()
Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is
all zeros.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Thu, 23 Aug 2012 08:50:12 +0000 (16:50 +0800)]
staging: rtl8192e: use is_zero_ether_addr() instead of memcmp()
Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is all
zeros.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Thu, 23 Aug 2012 07:19:37 +0000 (15:19 +0800)]
Staging: rtl8192u: use is_zero_ether_addr() instead of memcmp()
Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is all
zeros.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Thu, 23 Aug 2012 07:18:28 +0000 (15:18 +0800)]
Staging: rtl8187se: use is_zero_ether_addr() instead of memcmp()
Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is all
zeros.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Thibault [Sun, 26 Aug 2012 21:35:17 +0000 (23:35 +0200)]
speakup: lower default software speech rate
Speech synthesis beginners need a low speech rate, and trained people
want a high speech rate. A medium speech rate is thus actually not a
good default for neither. Since trained people will typically know how
to change the rate, better default for a low speech rate, which
beginners can grasp and learn how to increase it afterwards
This was agreed with users on the speakup mailing list.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Sun, 26 Aug 2012 01:22:33 +0000 (09:22 +0800)]
staging: r8712u: use is_broadcast_ether_addr() to simplify the code
Using is_broadcast_ether_addr() to simplify the code.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Sun, 26 Aug 2012 00:59:58 +0000 (08:59 +0800)]
staging: rtl8187se: use is_broadcast_ether_addr() instead of memcmp()
Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Sun, 26 Aug 2012 01:00:30 +0000 (09:00 +0800)]
Staging: rtl8192u: use is_broadcast_ether_addr() instead of memcmp()
Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Sun, 26 Aug 2012 01:04:23 +0000 (09:04 +0800)]
staging: rtl8192e: use is_broadcast_ether_addr() instead of memcmp()
Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Sun, 26 Aug 2012 01:02:16 +0000 (09:02 +0800)]
Staging: vt6655: using is_broadcast_ether_addr() to simplify the code
Using is_broadcast_ether_addr() to simplify the code.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Sun, 26 Aug 2012 01:03:04 +0000 (09:03 +0800)]
Staging: vt6656: using is_broadcast_ether_addr() to simplify the code
Using is_broadcast_ether_addr() to simplify the code.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin P. Mattock [Sun, 26 Aug 2012 15:16:45 +0000 (08:16 -0700)]
staging "vt6656" Typo rename Embeded to Embedded.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin P. Mattock [Sun, 26 Aug 2012 15:16:44 +0000 (08:16 -0700)]
staging "vt6656" Typo rename Caculate to Calculate.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin P. Mattock [Sun, 26 Aug 2012 15:16:43 +0000 (08:16 -0700)]
staging "vt6656" Fix typos in comments, and in a printk message.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin P. Mattock [Mon, 20 Aug 2012 15:43:15 +0000 (08:43 -0700)]
staging: "vt6655" Typo change *Caculate to *Calculate.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin P. Mattock [Mon, 20 Aug 2012 15:43:14 +0000 (08:43 -0700)]
staging: "vt6655" Typo change *Embeded to *Embedded.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin P. Mattock [Mon, 20 Aug 2012 15:43:13 +0000 (08:43 -0700)]
staging: "vt6655" Fix typos in comments.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toshiaki Yamane [Tue, 21 Aug 2012 11:13:09 +0000 (20:13 +0900)]
staging/vme: Use pr_ printks in vme_pio2_core.c
The below checkpatch warnings was fixed,
-WARNING: Prefer pr_err(... to printk(KERN_ERR, ...
and added pr_fmt.
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toshiaki Yamane [Tue, 21 Aug 2012 11:12:33 +0000 (20:12 +0900)]
Staging: vme: Fix a white space issue
The below checkpatch error was fixed.
-ERROR: trailing whitespace
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Wed, 22 Aug 2012 22:32:38 +0000 (15:32 -0700)]
staging: nvec: use system_nrt_wq instead of custom one
There isn't much reason to use custom workqueue in nvec. It can use
system_nrt_wq instead and cancel the two work items on removal.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Dietrich [Sun, 19 Aug 2012 17:03:08 +0000 (19:03 +0200)]
staging: nvec: do not depend on MACH_PAZ00
With the removal of board files on the tegra arch, drivers can now only
be instantiated via device tree. Consequently, all MACH_<board> config
variables are removed. As a temporary solution always enable building
for the (up to now) only supported paz00 board until nvec is full ported
to device tree.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Dietrich [Sun, 19 Aug 2012 17:03:07 +0000 (19:03 +0200)]
staging: nvec: release sync write lock in error case
We forgot to release the sync write lock in case the async write
fails. Found by rpiloose on IRC.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Dietrich [Sun, 19 Aug 2012 17:03:06 +0000 (19:03 +0200)]
staging: nvec: fix clock setup
commit
30b68231 "ARM: tegra: clock: add i2c fast clock entry in clock table"
added a new clock for the i2c controllers, so clock requests are no longer
conclusive. Fix this by specifying "div-clk" explicitly.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Sun, 26 Aug 2012 00:52:48 +0000 (08:52 +0800)]
staging: wlags49_h2: use is_broadcast_ether_addr() instead of memcmp()
Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Mon, 27 Aug 2012 14:21:13 +0000 (23:21 +0900)]
staging: wlags49_h2: Fix typo in staging/wlags49_h2 driver
Correct spelling typo in staging/wlags49_h2
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Sat, 18 Aug 2012 18:54:12 +0000 (00:24 +0530)]
staging: wlagn49_h2: move open brace of if from below to beside of if statement
the opening brace of the if statement should be beside to it, not below to it.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Sat, 18 Aug 2012 18:54:11 +0000 (00:24 +0530)]
staging: wlags49_h2: remove return statements at the end of all void functions
this patch removes the return statement at the end of all void functions,
since the function returning void no need to have a return at the end of the
function.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Sat, 18 Aug 2012 18:54:10 +0000 (00:24 +0530)]
staging: wlagn49_h2: fix the checkpatch warning about the space after the open paranthesis
the following fix is done in the wl_wds_netif_carrier_off function:
wl_netdev.c:1764: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1764: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1768: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1768: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1768: ERROR: space required before the open parenthesis '('
wl_netdev.c:1769: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1769: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1769: ERROR: space required before the open parenthesis '('
wl_netdev.c:1770: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1770: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1770: ERROR: space required before the open parenthesis '('
wl_netdev.c:1771: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1771: ERROR: space prohibited before that close parenthesis ')'
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Sat, 18 Aug 2012 18:54:09 +0000 (00:24 +0530)]
staging: wlags49_h2: style fix in w1_wds_netif_carrier_off
whitespaces at beginning of the line are removed and are replaced
with the tabs
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Sat, 18 Aug 2012 18:54:08 +0000 (00:24 +0530)]
staging: wlags49_h2: remove unneded return in wl_wds_netif_carrier_off
the return is at the end of void function, which is not needed as this
function returns void.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Sat, 18 Aug 2012 18:54:07 +0000 (00:24 +0530)]
staging: wlags49_h2: coding style fix at wl_wds_netif_carrier_off
no braces needed for single statement if block
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Tue, 28 Aug 2012 13:11:00 +0000 (21:11 +0800)]
staging: ozwpan: remove pointless conditional before kfree_skb()
Remove pointless conditional before kfree_skb().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Thu, 23 Aug 2012 06:33:11 +0000 (15:33 +0900)]
staging: ozwpan: Fix typo in staging/ozwpan
Fix spelling typo in staging/ozwpan
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Brett [Fri, 17 Aug 2012 20:13:18 +0000 (21:13 +0100)]
Staging: asus_oled: Add suspend/resume callbacks
- Add simple suspend/resume PM callbacks to disable oled display on
suspend and return to previous state on resume
Signed-off-by: Jonathan Brett <jonbrett.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toshiaki Yamane [Wed, 29 Aug 2012 13:45:15 +0000 (22:45 +0900)]
staging/rts_pstor: remove braces {} in rtsx_chip.c
fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toshiaki Yamane [Thu, 30 Aug 2012 13:45:11 +0000 (22:45 +0900)]
staging/rts_pstor: remove braces {} in rtsx_transport.c
fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toshiaki Yamane [Fri, 31 Aug 2012 12:23:29 +0000 (21:23 +0900)]
staging/rts_pstor: remove braces {} in rtsx_card.c
fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Tue, 4 Sep 2012 14:23:46 +0000 (15:23 +0100)]
staging: rts_pstor: Fix invalid check
As noted by David Binderman
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=46581
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rob Clark [Tue, 4 Sep 2012 16:36:20 +0000 (11:36 -0500)]
staging: drm/omap: invert dimensions on crtc when rotated
If rotated 90 or 270, we need to invert the dimensions used by drm
core for calculating if the dimensions of an attached fb are correct.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Wed, 22 Aug 2012 23:49:44 +0000 (16:49 -0700)]
staging: omapdrm: use alloc_ordered_workqueue() instead of UNBOUND w/ max_active = 1
This is an equivalent conversion and will ease scheduled removal of
WQ_NON_REENTRANT.
Only compile tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emil Goode [Fri, 17 Aug 2012 16:53:26 +0000 (18:53 +0200)]
staging: drm/omap: Add error handling
This patch adds fail checks for kmalloc and kzalloc calls
and also adds a error path that frees allocated pages by
introducing a call to _drm_gem_put_pages.
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 4 Sep 2012 19:12:05 +0000 (12:12 -0700)]
Merge tag 'iio-for-v3.7b' of git://git./linux/kernel/git/jic23/iio into work-next
Second set of IIO rework and new drivers for the 3.7 cycle.
Firstly we have the second half of a series reworking support for
the various sigma delta ADCs from Analog. The first half was fixes
that have already merged in the v3.6 cycle. Other than some
little cleanups this mainly consists of a unifying library module
that the various drivers can then use. Another new driver is
using this undergoing revisions and the code reduction already
seen from this is considerable. A nice piece of work.
Secondly we have a good number of tidying up patches from various
sources doing things like adding include guards and removing
unintended header ordering requirements. Also a mass annotation
of missing __devinit/exit. Peter Meerwald has been getting around
with cleanup of lis3l02dq, documentation fixes, white space clenaups
and a small issue with my spelling ;)
Thirdly we have some improvements to our kfifo usage that have
been around for a while but are now suddenly in demand from a
number of users.
Forth we have some clk_prepare_enable and clk_prepare_disable
cleanups.
Fifth is the addition of i2c dacs to the ad5446 driver
Finally we have some email address updates. I'll do the
MAINTAINERS one separately.
So a general mixed bag but nothing terribly controversial
or 'exciting'.
Ian Abbott [Fri, 31 Aug 2012 19:41:49 +0000 (20:41 +0100)]
staging: comedi: das08: abbreviate IS_ENABLED()
The `IS_ENABLED(CONFIG_COMEDI_DAS08_ISA)` and
`IS_ENABLED(CONFIG_COMEDI_DAS08_PCI)` macro calls are a bit long-winded.
Define a couple of macros `DO_ISA` and `DO_PCI` as abbreviations for
them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:48 +0000 (20:41 +0100)]
staging: comedi: das08: Add helper functions to check bus type
Add inline helper function `is_isa_board(board)` to check if the driver
supports ISA boards and this is an ISA board, and `is_pci_board(board)`
to check if the driver supports PCI boards and this is a PCI board.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:47 +0000 (20:41 +0100)]
staging: comedi: das08: Don't report iobase for PCI device
Don't bother reporting the I/O base address for PCI devices as it's not
very interesting.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 3 Sep 2012 16:42:18 +0000 (17:42 +0100)]
staging: comedi: das08: absorb das08_pci_attach_common()
Absorb `das08_pci_attach_common()` into `das08_attach_pci()` since
that's the only place it was called from.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:45 +0000 (20:41 +0100)]
staging: comedi: das08: Remove manual configuration of PCI boards
Remove the code that allows PCI boards to be manually attached by the
`COMEDI_DEVCONFIG` ioctl (or the `comedi_config` application).
Supported PCI boards will be attached automatically at probe time via
`comedi_pci_auto_config()` and the `attach_pci` hook in the `struct
comedi_driver`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:44 +0000 (20:41 +0100)]
staging: comedi: das08: Support read-back of AO subdevice
Stash the last value written to each AO channel in private data and
support the INSN_READ instruction to read it back. Don't bother setting
the SDF_READABLE subdevice flag though as the hardware isn't really
readable - we're just faking it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:43 +0000 (20:41 +0100)]
staging: comedi: das08: Initialize AO channels
Initialize the AO subdevice channels to mid-range data value so they are
in a known state. This allows us to support reading back the current
value in a later patch.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:42 +0000 (20:41 +0100)]
staging: comedi: das08: Rearrange AO write functions
Combine the AO write functions for 'JR' boards and other boards into a
single function and factor out the data writing from the comedi
instruction handling so it can be called from elsewhere in a later
patch.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:41 +0000 (20:41 +0100)]
staging: comedi: das08: Unmark some __maybe_unused functions
The `das08jr_di_rbits()`, `das08jr_do_wbits()`, `das08jr_ao_winsn()` and
`das08ao_ao_winsn()` static functions are currently marked as
`__maybe_unused` as they were formerly only referred to by possibly
conditionally compiled out code. This is no longer the case (they are
referred to by `das08_common_attach()`) so their `__maybe_unused` tags
can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:40 +0000 (20:41 +0100)]
staging: comedi: das08: No need to check insn->n for counter config
There is no need to check the value of `insn->n` is correct in
`das08_counter_config()` as the core comedi module will have already
checked it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:39 +0000 (20:41 +0100)]
staging: comedi: das08: Remove i8254_iobase from private data
The I/O port base address for the counter subdevice doesn't need to be
stored in the private data. It can be calculated on the fly using the
offset in the static board data.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:38 +0000 (20:41 +0100)]
staging: comedi: das08: Remove pci_iobase from private data
The `pci_iobase` I/O port registers from PCI BAR 1 are never accessed,
so don't bother storing this base address in `struct
das08_private_struct`.
The `pci_iobase` member was checked for non-zero in `das08_detach()` but
we can check `dev->iobase` is non-zero instead.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:37 +0000 (20:41 +0100)]
staging: comedi: das08: Remove dead code
Remove the code that has been in `#if 0` for a long time.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:36 +0000 (20:41 +0100)]
staging: comedi: das08,das08_cs: Move das08_cs_boards[]
Move `das08_cs_boards[]` from "das08.c" to "das08_cs.c" and make it
static const. It no longer refers to anything in "das08.c" and no
longer needs to be exported.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:35 +0000 (20:41 +0100)]
staging: comedi: das08: Avoid zero initializers in board structure
Don't bother initializing the `i8255_offset` and/or `i8254_offset`
members of `struct das08_board_struct` in `das08_boards[]` and
`das08_cs_boards[]` if they are zero as they are implicitly initialized
to zero anyway, and zero means the corresponding subdevices are absent.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:34 +0000 (20:41 +0100)]
staging: comedi: das08: Remove function pointers from board structure
Remove the `ai`, `ao`, `di` and `do` pointers from `struct
das08_board_struct`. These were initialized in `das08_boards[]` and
`das08_cs_boards[]` to point to comedi instruction handler functions for
the subdevice, but there are only two sets of functions depending on
whether the `is_jr` member is true or false, and some of the functions
will be NULL if the corresponding `ai_nbits`, `ao_nbits`, `di_nchan` and
`do_nchan` members are zero. Determine which handler functions to use
in das08_common_attach().
One element of `das08_boards[]` had `ao` set to NULL and `ao_nbits` set
to 12. Set `ao_nbits` to 0 in this case to let das08_common_attach()
know this board has no AO subdevice.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:33 +0000 (20:41 +0100)]
staging: comedi: das08: Mark 'JR' boards in board data
Add a bool member `is_jr` to `struct das08_board_struct` and initialize
it to `true` in those elements of `das08_boards[]` corresponding to the
'JR' board models. This will be used by a following patch that removes
the `ai`, `ao`, `di` and `do` members from `struct das08_board_struct`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:32 +0000 (20:41 +0100)]
staging: comedi: das08: Add number of DI channels in board structure
Add member `di_nchan` to `struct das08_board_struct` to set the number
of digital input channels explicitly. Currently, the code determines
the number of channels to 3 or 8 depending on what function the `di`
member points to, which is not very elegant.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:31 +0000 (20:41 +0100)]
staging: comedi: das08: Remove pc104 bustype value
Remove the `pc104` value from `enum das08_bustype` and replace
occurrences of it in the code and data with the `isa` value. The code
treats them as equivalent anyway with expressions like
`(thisboard->bustype == isa || thisboard->bustype == pc104)`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 4 Sep 2012 18:58:26 +0000 (11:58 -0700)]
Merge branch 'staging-linus' into staging-next
Pick up 2 more comedi patches from Ian that are needed for other
changes in the future.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:30 +0000 (20:41 +0100)]
staging: comedi: das08: Correct AO output for das08jr-16-ao
Don't zero out bits 15..12 of the data value in `das08jr_ao_winsn()` as
that knobbles the upper three-quarters of the output range for the
'das08jr-16-ao' board.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Aug 2012 19:41:29 +0000 (20:41 +0100)]
staging: comedi: das08: Correct AI encoding for das08jr-16-ao
The element of `das08_boards[]` for the 'das08jr-16-ao' board has the
`ai_encoding` member set to `das08_encode12`. It should be set to
`das08_encode16` same as the 'das08jr/16' board. After all, this board
has 16-bit AI resolution.
The description of the A/D LSB register at offset 0 seems incorrect in
the user manual "cio-das08jr-16-ao.pdf" as it implies that the AI
resolution is only 12 bits. The diagrams of the A/D LSB and MSB
registers show 15 data bits and a sign bit, which matches what the
software expects for the `das08_encode16` AI encoding method.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 24 Aug 2012 16:26:26 +0000 (17:26 +0100)]
staging: comedi: serial2002: Set range for digital inputs and outputs
I got an update from the original author of this driver (Anders
Blomdell) to set the range table for digital input and digital output
subdevices. Apply it.
Cc: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 4 Sep 2012 18:46:38 +0000 (11:46 -0700)]
Merge branch 'staging-linus' into staging-next
This gets the 6 staging comedi patches that are needed for further
patches that Ian sent.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 3 Sep 2012 15:39:43 +0000 (16:39 +0100)]
staging: comedi: das08: Fix PCI ref count
When attaching a PCI device manually via the comedi driver `attach` hook
(`das08_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG`
ioctl), its reference count is incremented in the `for_each_pci_dev`
loop (in `das08_find_pci()`). It is decremented when the `detach` hook
(`das08_detach()`) is called to detach the device. However, when the
PCI device is attached automatically via the `attach_pci` hook
(`das08_attach_pci()`, called at probe time via
`comedi_pci_auto_config()`) it's reference count is not incremented so
there will be an unmatched decrement when detaching the device.
Increment the PCI device reference count in `das08_attach_pci()` to
correct the mismatch.
Once support for manual configuration has been removed from this driver,
the calls to `pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 3 Sep 2012 15:39:42 +0000 (16:39 +0100)]
staging: comedi: amplc_pci230: Fix PCI ref count
When attaching a PCI device manually via the comedi driver `attach` hook
(`pci230_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG`
ioctl), its reference count is incremented in the `for_each_pci_dev`
loop (in `pci230_find_pci_dev()`). It is decremented when the `detach`
hook (`pci230_detach()`) is called to detach the device. However, when
the PCI device is attached automatically via the `attach_pci` hook
(`pci230_attach_pci()`, called at probe time via
`comedi_pci_auto_config()`) it's reference count is not incremented so
there will be an unmatched decrement when detaching the device.
Increment the PCI device reference count in `pci230_attach_pci()` to
correct the mismatch.
Once support for manual configuration has been removed from this driver,
the calls to `pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 3 Sep 2012 15:39:41 +0000 (16:39 +0100)]
staging: comedi: amplc_pc263: Fix PCI ref count
When attaching a PCI device manually via the comedi driver `attach` hook
(`pc263_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG`
ioctl), its reference count is incremented in the `for_each_pci_dev`
loop (in `pc263_find_pci_dev()`). It is decremented when the `detach`
hook (`pc263_detach()`) is called to detach the device. However, when
the PCI device is attached automatically via the `attach_pci` hook
(`pc263_attach_pci()`, called at probe time via
`comedi_pci_auto_config()`) it's reference count is not incremented so
there will be an unmatched decrement when detaching the device.
Increment the PCI device reference count in `pc263_attach_pci()` to
correct the mismatch.
Once support for manual configuration has been removed from this driver,
the calls to `pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 3 Sep 2012 15:39:40 +0000 (16:39 +0100)]
staging: comedi: amplc_pc236: Fix PCI ref count
When attaching a PCI device manually via the comedi driver `attach` hook
(`pc236_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG`
ioctl), its reference count is incremented in the `for_each_pci_dev`
loop (in `pc236_find_pci_dev()`). It is decremented when the `detach`
hook (`pc236_detach()`) is called to detach the device. However, when
the PCI device is attached automatically via the `attach_pci` hook
(`pc236_attach_pci()`, called at probe time via
`comedi_pci_auto_config()`) it's reference count is not incremented so
there will be an unmatched decrement when detaching the device.
Increment the PCI device reference count in `pc236_attach_pci()` to
correct the mismatch.
Once support for manual configuration has been removed from this driver,
the calls to `pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 3 Sep 2012 15:39:39 +0000 (16:39 +0100)]
staging: comedi: amplc_dio200: Fix PCI ref count
When attaching a PCI device manually via the comedi driver `attach` hook
(`dio200_attach()`) (called by the comedi core for the
`COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the
`for_each_pci_dev` loop (in `dio200_find_pci_dev()`). It is decremented
when the `detach` hook (`dio200_detach()`) is called to detach the
device. However, when the PCI device is attached automatically via the
`attach_pci` hook (`dio200_attach_pci()`, called at probe time via
`comedi_pci_auto_config()`) it's reference count is not incremented so
there will be an unmatched decrement when detaching the device.
Increment the PCI device reference count in `dio200_attach_pci()` to
correct the mismatch.
Once support for manual configuration has been removed from this driver,
the calls to `pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 3 Sep 2012 15:39:38 +0000 (16:39 +0100)]
staging: comedi: amplc_pci224: Fix PCI ref count
When attaching a PCI device manually via the comedi driver `attach` hook
(`pci224_attach()`) (called by the comedi core for the
`COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the
`for_each_pci_dev` loop (in `pci224_find_pci_dev()`). It is decremented
when the `detach` hook (`pci224_detach()`) is called to detach the
device. However, when the PCI device is attached automatically via the
`attach_pci` hook (`pci224_attach_pci()`, called at probe time via
`comedi_pci_auto_config()`) it's reference count is not incremented so
there will be an unmatched decrement when detaching the device.
Increment the PCI device reference count in `pci224_attach_pci()` to
correct the mismatch.
Once support for manual configuration has been removed from this driver,
the calls to `pci_dev_get()` and `pci_dev_put()` can be removed.
Cc: stable <stable@vger.kernel.org> # 3.5.x
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 22:05:23 +0000 (15:05 -0700)]
staging: comedi: comedi_test: convert attach message to dev_info
Convert the 'attach' message from a printk to a dev_info.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 22:05:02 +0000 (15:05 -0700)]
staging: comedi: comedi_test: remove boardinfo
This boardinfo for this driver is unneccesary. This driver is only
for testing the comedi subsystem. It defines two dummy subdevices,
an 8 channel analog input subdevice and an 8 channel analog output
subdevice. There is no "board" associated with it.
Remove the boardinfo to keep the driver simple.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 22:04:24 +0000 (15:04 -0700)]
staging: comedi: comedi_test: remove devpriv macro
This macro relies on a local variable having a specific name. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 21:31:10 +0000 (14:31 -0700)]
staging: comedi: comedi_parport: remove the printk noise
Remove the function trace message in parport_intr_cancel() and the
"bogus irq..." message is parport_interrupt(). They are just added
noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 21:30:53 +0000 (14:30 -0700)]
staging: comedi: comedi_parport: cleanup 'attach' printk's
Convert the printk messages in the 'attach' to dev_printk messages.
Consolidate the attach message into one message after the device
is attached.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 21:30:27 +0000 (14:30 -0700)]
staging: comedi: comedi_parport: cleanup dev->board_name
Use the 'dev->driver->driver_name' for the 'dev->board_name'. And use
the 'dev->board_name' for the resource name passed to request_region
and request_irq.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 21:30:08 +0000 (14:30 -0700)]
staging: comedi: comedi_parport: remove devpriv macro
This macro relies on a local variable having a specific name, Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 19:53:56 +0000 (12:53 -0700)]
staging: comedi: comedi_bond: remove MODULE_NAME macro
This macro is only used in the MODULE_DESCRIPTION. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 19:53:36 +0000 (12:53 -0700)]
staging: comedi: comedi_bond: remove the STR macro
This macro is not used in the file. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 19:53:20 +0000 (12:53 -0700)]
staging: comedi: comedi_bond: remove private printk macros
Remove the macros LOG_MSG, DEBUG, WARNING, and ERROR. Convert
the printk's into dev_printk format.
The DEBUG macro is not being used in the file so the module
parameter 'debug' can also be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 19:52:58 +0000 (12:52 -0700)]
staging: comedi: comedi_bond: remove devpriv macro
This macro relies on a local variable having a specific name.
Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 19:52:41 +0000 (12:52 -0700)]
staging: comedi: comedi_bond: remove boardinfo
The only field in the boardinfo for this driver is a pointer to the
board 'name'. This field is used by the comedi core to match against
the driver when doing a legacy attach. If a driver does not have any
boardinfo, the comedi core matches against the driver name.
Since the boardinfo name and driver name are identical we can simplify
this driver a bit bu just removing the boardinfo completely.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 18:29:16 +0000 (11:29 -0700)]
staging: comedi: aio_aio12_8: fix i/o region size
This board has jumpers to set the board base address. These
jumpers are marked A5 through A9 and A5 is the least significant
bit of the address. This makes the address reqion for the board
32 bytes not 24.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 18:28:52 +0000 (11:28 -0700)]
staging: comedi: aio_aio12_8: document the register map
Fully document the register map and add namespace to all the
defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 18:28:28 +0000 (11:28 -0700)]
staging: comedi: aio_aio12_8: add ai and ao only card versions
Add the analog input and analog output only versions of the card
to the boardinfo. These cards all share the same i/o map.
Cleanup the attach so that the unsupported subdevices are not
initialized.
All of these boards also have an 8254 counter/timer. The 8254
device is not currently supported but stub in the subdevice
information so it can easily be added.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 20 Aug 2012 18:28:07 +0000 (11:28 -0700)]
staging: comedi: aio_aio12_8: remove devpriv macro
This macro relies on a local variable having a specific name. Remove
it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 18 Aug 2012 01:21:12 +0000 (18:21 -0700)]
staging: comedi: adv_pci_dio: fix bug in 'detach'
The 'attach' function can fail between when the devpriv and
the comedi subdevices are allocated. If it does the 'detach'
will try to access unallocated memory when it goes thru the
subdevices.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 18 Aug 2012 01:20:51 +0000 (18:20 -0700)]
staging: comedi: adv_pci_dio: simplify the 'detach'
Currently the 'detach' function in this driver walks thru the
boardinfo in order to find the subdevice index for any sdio
subdevices in order to call the subdev_8255_cleanup(). Then
it goes thru all the subdevices to clean the s->private pointer.
All the sdio subdevices are unique in that the s->type is
COMEDI_SUBD_DIO. Use that to know when to call the cleanup
for the 8255 subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 18 Aug 2012 01:20:34 +0000 (18:20 -0700)]
staging: comedi: adv_pci_dio: add the number of subdevices to the boardinfo
Instead of calculating the number of subdevices in the 'attach'
simply add the number to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 18 Aug 2012 01:20:14 +0000 (18:20 -0700)]
staging: comedi: adv_pci_dio: remove '0' boardinfo data
Remove all the boardinfo data that is simply '0'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 18 Aug 2012 01:19:56 +0000 (18:19 -0700)]
staging: comedi: adv_pci_dio: convert boardinfo initialization to C99 format
Convert the boardinfo initialization to C99 format to make it
less error prone.
The struct diosubd_data information is not converted to C99 format
yet because some of it will be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 18 Aug 2012 01:19:36 +0000 (18:19 -0700)]
staging: comedi: adv_pci_dio: use attach_pci callback
Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options, and
the legacy 'attach' callback is now optional, remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.046053 seconds and 5 git commands to generate.