Ken Raeburn [Fri, 6 May 1994 06:55:35 +0000 (06:55 +0000)]
* emultempl/generic.em: Use "e" rather than "em_" as prefix for filename.
* emultempl/gld960.em, emultempl/gld960c.em, emultempl/lnk960.em,
emultempl/hppaelf.em, emultempl/m88kbcs.em, emultempl/vanilla.em: Ditto.
* Makefile.in: Changed all generated file names.
(ldemul-list.h): Depend on Makefile, not config.status. Changed sed patterns
to handle new filenames.
Ken Raeburn [Fri, 6 May 1994 06:54:15 +0000 (06:54 +0000)]
* config/mipsl-idt.mt: Renamed from mips-idtl.mt.
* configure.in: Adjusted.
Stan Shebs [Fri, 6 May 1994 03:31:15 +0000 (03:31 +0000)]
Thu May 5 20:23:36 1994 Stan Shebs (shebs@andros.cygnus.com)
* stabs.texinfo (Stab Section Basics): Add comment about alignment
of stabs-in-coff sections.
Ken Raeburn [Fri, 6 May 1994 00:40:18 +0000 (00:40 +0000)]
* emulparams/gld960coff.sh: New file.
Patches from Ralph Campbell:
* emulparams/mipsbsd.sh (OUTPUT_FORMAT): Fix name to have `a.out'
instead of `aout'.
Ken Raeburn [Fri, 6 May 1994 00:39:32 +0000 (00:39 +0000)]
* config/cf-h8300h.mt: Renamed from coff-h8300h.mt, to make it unique in 8.3.
* config/i960coff.mt: New file.
Patches from Ralph Campbell:
* config/mipsbsd.mh: New file.
Ken Raeburn [Fri, 6 May 1994 00:12:22 +0000 (00:12 +0000)]
* config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it unique in 8.3
naming schemes.
* configure.in (appdirs): New variable. Currently empty, but will be used in
gas distribution. If nonempty, lists a set of directories at least one of
which must get configured, or top level configuration is considered to have
failed.
(rs6000-*-lynxos*): Use new file name.
Ken Raeburn [Fri, 6 May 1994 00:11:03 +0000 (00:11 +0000)]
* config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it unique in 8.3
naming schemes.
Ken Raeburn [Fri, 6 May 1994 00:03:20 +0000 (00:03 +0000)]
Note deleted files.
Ken Raeburn [Fri, 6 May 1994 00:03:11 +0000 (00:03 +0000)]
* symbols.c (symbol_new) [BFD_ASSEMBLER]: Don't permit additions to the symbol
table if it's already been set in the output bfd.
(symbol_begin) [! EMIT_SECTION_SYMBOLS] [RELOC_REQUIRES_SYMBOL]: Don't use
bfd_abs_section.symbol for gas absolute symbol.
Ken Raeburn [Fri, 6 May 1994 00:00:41 +0000 (00:00 +0000)]
doc/Makefile.in (distclean, clean-dvi, clean-info): Delete gasp files too.
Ken Raeburn [Thu, 5 May 1994 23:25:12 +0000 (23:25 +0000)]
gprof.h, Makefile.in changes
Ken Raeburn [Thu, 5 May 1994 23:24:57 +0000 (23:24 +0000)]
(TRUE, FALSE): Always use undef before defining them.
Ken Raeburn [Thu, 5 May 1994 23:24:33 +0000 (23:24 +0000)]
(install-info): Check for gprof.info in build dir, fall back to srcdir. Depend
on it.
Ken Raeburn [Thu, 5 May 1994 22:53:04 +0000 (22:53 +0000)]
syslex.l, objdump.c/config changes
Ken Raeburn [Thu, 5 May 1994 22:52:31 +0000 (22:52 +0000)]
* Makefile.in (objdump.o): Deleted special rule.
* configure.in: Don't bother building ARCHDEFS variable for Makefile.
* objdump.c (ARCH_*): Deleted handling.
(disassemble_data): Call `disassembler' from opcodes library.
Ken Raeburn [Thu, 5 May 1994 22:51:27 +0000 (22:51 +0000)]
(yywrap): Define as function if not defined as a macro.
Ian Lance Taylor [Thu, 5 May 1994 22:22:24 +0000 (22:22 +0000)]
* config/tc-mips.c (mips_emit_delays): Make call to
mips_no_prev_insn unconditional.
Ken Raeburn [Thu, 5 May 1994 21:38:25 +0000 (21:38 +0000)]
* config/obj-coff*.*: Merged coffbfd versions into coff versions, with a single
"#ifdef BFD_ASSEMBLER" controlling most of it for now. Deleted obj-coffbfd.*
files.
* configure.in: Always use obj-coff.* for COFF targets.
Ken Raeburn [Thu, 5 May 1994 21:34:11 +0000 (21:34 +0000)]
* config/default.exp: Renamed from unix-gas.exp.
Stan Shebs [Thu, 5 May 1994 19:07:10 +0000 (19:07 +0000)]
Thu May 5 12:00:22 1994 Stan Shebs (shebs@andros.cygnus.com)
* rs6000-nat.c (vmap_ldinfo): Don't fail if fstat returns an
error.
Ken Raeburn [Thu, 5 May 1994 05:27:24 +0000 (05:27 +0000)]
* configure.in (mips*-dec-bsd*): New target; do build linker.
(mips*-*-bsd*): New target; don't build linker.
Jim Kingdon [Thu, 5 May 1994 04:35:09 +0000 (04:35 +0000)]
* infrun.c (proceed, normal_stop, wait_for_inferior), breakpoint.c
(print_it_normal): Add annotations for the inferior starting and
stopping, and for all the various messages related to how it
stopped.
* printcmd.c (do_one_display): Annotate.
* stack.c (print_frame_info): Annotate printing of stack frames.
Jim Kingdon [Thu, 5 May 1994 04:25:03 +0000 (04:25 +0000)]
* annotate.texi: Change edition to 0.5 and date to May 1994.
Add index.
(Frames): New node, for frame annotation.
(Displays): New node, for display annotation.
Stu Grossman [Thu, 5 May 1994 01:18:26 +0000 (01:18 +0000)]
* remote.c (get_offsets): Handle case where stub doesn't support
qOffsets message.
Per Bothner [Thu, 5 May 1994 00:19:33 +0000 (00:19 +0000)]
Add partial support for g++ code compiled with -fvtable-thunks.
* c-valprint.c (c_val_print): Add vtblprint support
when using thunks.
* cp-valprint.c (cp_is_vtbl_member): A vtable can be an array of
pointers (if using thunks) as well as array of structs (otherwise).
* cp-valprint.c (vtbl_ptr_name_old, vtbl_ptr_name): Move to global
level, and make the latter non-static (so define_symbol can use it).
* stabsread.c (define_symbol): If the type being defined is a
pointer type named "__vtbl_ptr_type", set the TYPE_NAME to that name.
* symtab.h (VTBL_PREFIX_P): Allow "_VT" as well as "_vt".
* values.c (value_virtual_fn_field): Handle thunks.
* values.c (value_headof): Minor efficiency hack.
* values.c (value_headof): Incomplete thunk support. FIXME.
Stu Grossman [Wed, 4 May 1994 21:42:06 +0000 (21:42 +0000)]
* chardefs.h, rldefs.h: Move decls of string funcs from chardefs.h
to rldefs.h so that they don't pollute apps that include
readline.h.
* history.c: include rldefs.h to get decls of string funcs.
Ken Raeburn [Wed, 4 May 1994 20:24:51 +0000 (20:24 +0000)]
* config/te-dpx2.h (TARGET_FORMAT, REGISTER_PREFIX_OPTIONAL): Define.
* configure.in (m68k-bull-sysv3*): Enable.
Ian Lance Taylor [Wed, 4 May 1994 20:22:15 +0000 (20:22 +0000)]
* config/m68k.mt (EMUL): Set to m68kaout.
* emulparams/m68kaout.sh: New file.
* Makefile.in (ALL_EMULATIONS): Add em_m68kaout.o.
(em_m68kaout.c): New target.
Ian Lance Taylor [Wed, 4 May 1994 19:58:58 +0000 (19:58 +0000)]
* config/tc-m68k.h (TARGET_FORMAT): If not TE_SUN3, define as
"a.out-zero.big".
Ian Lance Taylor [Wed, 4 May 1994 19:37:36 +0000 (19:37 +0000)]
For PR 1927.
Changed m68k-aout to set flags to 0; m68k-sunos still uses 1.
* aout0.c: New file.
* targets.c (aout0_big_vec): Declare.
(bfd_target_vector): Add aout0_big_vec.
* config.bfd (m68*-*-aout*): Use m68k-0aout, not m68k-aout.
* config/m68k-aout.mt (SELECT_VECS): Removed.
* config/m68k-0aout.mt: New file.
* configure.in (aout0_big_vec): New target vector: use aout0.o,
aout32.o and stab-syms.o.
* Makefile.in: Rebuilt dependencies.
(BFD32_BACKENDS): Add aout0.o.
(CFILES): Add aout0.c.
* libaout.h (struct aout_backend_data): Add field exec_hdr_flags.
* aout-target.h (MY_exec_hdr_flags): If not defined, define as 0.
MY(backend_data): Initialize exec_hdr_flags field.
* aoutf1.h (sunos_32_set_arch_mach): Make static.
(aout32_sunos4_write_object_contents): Set flags from backend
info.
(MY_exec_hdr_flags): If not defined, define as 1.
(sunos4_aout_backend): Initialize exec_hdr_flags field.
* aout-encap.c (encap_write_object_contents): Set flags from
backend info.
(MY_exec_hdr_flags): Define as N_FLAGS_COFF_ENCAPSULATE.
* hp300hpux.c (MY_exec_hdr_flags): Define as 0x2.
(MY(write_object_contents)): Set flags from backend info.
* i386aout.c (MY(backend_data)): Initialize exec_hdr_flags field.
* i386mach3.c (MY(backend_data)): Likewise.
* mipsbsd.c (MY(backend_data)): Likewise.
* sparclynx.c (NAME(aout,sparclynx_write_object_contents)): Set
flags from backend info.
(sparclynx_aout_backend): Initialize exec_hdr_flags field.
Stan Shebs [Wed, 4 May 1994 19:19:44 +0000 (19:19 +0000)]
Wed May 4 12:15:11 1994 Stan Shebs (shebs@andros.cygnus.com)
* configure.in (rs6000-bull-bosx*): New configuration, RS/6000
variant.
Fixes PR 4903.
Ken Raeburn [Wed, 4 May 1994 17:38:50 +0000 (17:38 +0000)]
coff_gnu deletion
Ken Raeburn [Wed, 4 May 1994 17:33:50 +0000 (17:33 +0000)]
not used
Ken Raeburn [Wed, 4 May 1994 17:31:36 +0000 (17:31 +0000)]
* config.bfd (i386-*-gnu*): Treat like i386-*-mach*.
(m68*-apollo-*): Treat all Apollo configs the same, don't handle BSD specially.
Ian Lance Taylor [Wed, 4 May 1994 16:14:00 +0000 (16:14 +0000)]
For PR 4906.
* ldlang.c (lang_size_sections): If dot moves because of an
assignment, don't try to insert a pad into the absolute output
section, just change the address of the default memory region
instead.
Ian Lance Taylor [Wed, 4 May 1994 16:00:30 +0000 (16:00 +0000)]
* Makefile.in (mostlyclean): Remove cdtest.tmp, cdtest-ur,
cdtest-ur.out, and cdtest-ur.tmp.
Ian Lance Taylor [Wed, 4 May 1994 15:31:17 +0000 (15:31 +0000)]
* config/obj-coffbfd.c (fixup_segment): Make common symbol and PC
relative adjustments when TE_LYNX is defined as well as when
TC_I386 is defined.
Jim Kingdon [Wed, 4 May 1994 15:24:41 +0000 (15:24 +0000)]
* valprint.c (print_longest): Clarify comment about use_local.
* printcmd.c, defs.h (print_address_numeric), callers in
symmisc.c, symfile.c, stack.c, source.c, remote.c, infcmd.c,
cp-valprint.c, core.c, ch-valprint.c, c-valprint.c, breakpoint.c,
exec.c: New argument use_local.
* source.c (identify_source_line): Use filtered output. Use
print_address_numeric.
Jim Kingdon [Wed, 4 May 1994 14:20:32 +0000 (14:20 +0000)]
* core.c (memory_error), symtab.c (cplusplus_hint, decode_line_1),
language.c (type_error, range_error): Use filtered output.
* utils.c (error_begin): Update comment to tell people to use
filtered output.
Jim Kingdon [Wed, 4 May 1994 14:04:34 +0000 (14:04 +0000)]
* Makefile.in (HFILES_WITH_SRCDIR): List bfd.h.
(HFILES_NO_SRCDIR): List gdbcore.h not gdbcore_h, so as not to get
bfd.h.
Jim Kingdon [Wed, 4 May 1994 13:28:23 +0000 (13:28 +0000)]
* remote.texi (MIPS Remote): Say that set timeout doesn't apply
when waiting for your program to stop.
Ken Raeburn [Wed, 4 May 1994 07:08:44 +0000 (07:08 +0000)]
adjust_symtab, as.h changes
Ken Raeburn [Wed, 4 May 1994 06:32:20 +0000 (06:32 +0000)]
i386-gnu config, coff sync, i960 coff changes
Ken Raeburn [Wed, 4 May 1994 06:29:30 +0000 (06:29 +0000)]
(i386-*-gnu*): New target, handled like i386-mach.
Ken Raeburn [Wed, 4 May 1994 06:19:26 +0000 (06:19 +0000)]
* obj-coff.h (TARGET_FORMAT) [TC_I960]: Select little endian version.
* obj-coffbfd.h (TARGET_FORMAT) [TC_I960]: Ditto.
* obj-coff.c (coff_frob_section): Round up the size of every section to a
multiple of the alignment, so that BFD doesn't surprise us.
Eliminate many simple differences between the two COFF back ends:
* obj-coffbfd.c: Removed all uses of DEFUN and DEFUN_VOID. Made minor
stylistic changes, deleted some register declarations.
(stack_top): Deleted.
(symbol_to_chars): Use absolute_section and reg_section instead of the
corresponding SEG_* symbols.
(obj_coff_endef, tag_find_or_make, fixup_segment): Likewise.
(stack typedef, stack_init, stack_delete, stack_push, stack_pop): Moved to just
after pseudo-op table. All functions now static.
(stack_delete): Removed declaration.
(tag_init, tag_insert, tag_find_or_make, tag_find): Moved to just after stack
functions.
* obj-coffbfd.h: Reordered some declarations and macros.
(stack_init, stack_delete, stack_push, stack_pop): Don't declare.
(stack typedef): Deleted.
(SYMBOLS_NEED_BACKPOINTERS): Always undef then define; don't test.
(SYM_AUXENT): New macro.
(SA_GET_*, SA_SET_*): Define in terms of SYM_AUXENT when feasible.
(SF_GET_*, SF_SET_*): Define in terms of SF_GET when feasible.
(SA_GET_SYM_TAGNDX, SA_GET_SYM_ENDNDX, SA_SET_SYM_TAGNDX, SA_SET_SYM_ENDNDX,
object_headers typedef, data_section_header, text_section_header): Delete
non-BFD_HEADERS versions, since we always define that symbol now.
* obj-coff.c (stack_top): Deleted.
(obj_coff_endef, obj_coff_dim, obj_coff_line, obj_coff_size, obj_coff_scl,
obj_coff_tag, obj_coff_type, obj_coff_val): Change argument name from "ignored"
to "ignore".
(obj_coff_val): Use frag_now_fix.
(obj_pseudo_table): Removed IGNORE_DEBUG version, since it doesn't get used.
(stack typedef, stack_init, stack_delete, stack_push, stack_pop): Moved to just
after pseudo-op table. All functions now static.
(tag_init, tag_insert, tag_find_or_make, tag_find): Moved to just after stack
functions.
* obj-coff.h: Reordered some declarations and macros. Protected against
multiple inclusions.
(stack_init, stack_delete, stack_push, stack_pop): Don't declare.
(stack typedef): Deleted.
(SYMBOLS_NEED_BACKPOINTERS): Always undef then define; don't test.
(stdoutput): Deleted declaration.
(TARGET_FORMAT) [TC_I386]: Don't define if already defined.
Ken Raeburn [Wed, 4 May 1994 05:45:43 +0000 (05:45 +0000)]
* configure.in (i[34]86-*-sco*): Move to be with other i386 targets.
(romp-*-*): New target. Skip various binary utilities.
(vax-*-*): New target. Don't build newlib.
(vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
Ian Lance Taylor [Tue, 3 May 1994 23:58:06 +0000 (23:58 +0000)]
* cache.c: Rewrote to work correctly.
* libbfd.h: Rebuilt.
* opncls.c (bfd_cache_init, bfd_open_file): Don't declare.
(bfd_fdopenr): Check return value of bfd_cache_init.
Jim Kingdon [Tue, 3 May 1994 15:13:26 +0000 (15:13 +0000)]
* procfs.c (procfs_wait): Reinstate code which deduces the signal
from the fault, #ifndef FAULTED_USE_SIGINFO.
* config/sparc/tm-sun4sol2.h: Define FAULTED_USE_SIGINFO.
Ian Lance Taylor [Tue, 3 May 1994 00:15:24 +0000 (00:15 +0000)]
Remove obsolete files. Add mt-slite to .Sanitize.
Steve Chamberlain [Mon, 2 May 1994 23:20:10 +0000 (23:20 +0000)]
Kill three year old cruft.
Stan Shebs [Mon, 2 May 1994 22:51:34 +0000 (22:51 +0000)]
Keep Lynx linker scripts.
Ian Lance Taylor [Mon, 2 May 1994 21:26:55 +0000 (21:26 +0000)]
* subsegs.h (segment_info_type): Use fix_tail field even if
BFD_ASSEMBLER.
* subsegs.c (subseg_change): Initialize fix_tail field.
(subseg_get): Likewise.
* write.c (frags_chained): New static variable.
(fix_new_internal): If frags_chained is set, use fix_root and
fix_tail from seg_info (now_seg), rather than frchain_now.
(chain_frchains_together_1): Set fix_tail field.
(chain_frchains_together): Set frags_chained.
Jim Kingdon [Sat, 30 Apr 1994 01:31:49 +0000 (01:31 +0000)]
* annotate.texi (Breakpoint Info): Document annotation of header
fields and record annotation.
Jim Kingdon [Sat, 30 Apr 1994 01:30:28 +0000 (01:30 +0000)]
* breakpoint.c (breakpoint_1): Annotate each field of the headers.
Explicitly annotate each record.
Stan Shebs [Sat, 30 Apr 1994 00:04:43 +0000 (00:04 +0000)]
Fri Apr 29 15:56:18 1994 Stan Shebs (shebs@andros.cygnus.com)
* xcoffexec.c: Reformat to standards and lint.
(language.h): Include.
(exec_close): Declare arg "quitting".
(file_command): Declare arg "from_tty".
(map_vmap): Cast xmalloc result to PTR.
* rs6000-nat.c: Reformat to standards and lint.
(exec_one_dummy_insn): Use char array for saved instruction.
(fixup_breakpoints): Declare.
(vmap_ldinfo): Be more informative in fatal error messages.
(xcoff_relocate_symtab): Define to return void.
* xcoffsolib.h: Reformat to standards, improve comments.
* config/rs6000/nm-rs6000.h (xcoff_relocate_symtab): Declare.
Stan Shebs [Fri, 29 Apr 1994 21:41:14 +0000 (21:41 +0000)]
Fri Apr 29 14:26:35 1994 Stan Shebs (shebs@andros.cygnus.com)
* Makefile.in (RUNTEST): Default to just "runtest".
Ian Lance Taylor [Fri, 29 Apr 1994 19:09:51 +0000 (19:09 +0000)]
* cf-m68klynx.c (CALC_ADDEND): Check for PC relative relocs by
enumerating them, since the reloc type can not serve as an index
into the m68k COFF howto_table.
Steve Chamberlain [Fri, 29 Apr 1994 16:51:18 +0000 (16:51 +0000)]
lint.
Steve Chamberlain [Fri, 29 Apr 1994 16:48:25 +0000 (16:48 +0000)]
* config.bfd (*-go32): Changed to coff.
* coff-h8300.c (JMPL1): Get HOWTO right for 24bit branches.
* srec.c (srec_write_symbols): Write out the correct number of
symbols and don't stick in extra nulls.
Steve Chamberlain [Fri, 29 Apr 1994 16:44:48 +0000 (16:44 +0000)]
* coff-h8300.c (JMPL1): Get HOWTO right for 24bit branches.
Ken Raeburn [Fri, 29 Apr 1994 15:46:36 +0000 (15:46 +0000)]
keep disassemble.c
Jim Kingdon [Fri, 29 Apr 1994 00:04:16 +0000 (00:04 +0000)]
new window management code
Ken Raeburn [Thu, 28 Apr 1994 22:59:09 +0000 (22:59 +0000)]
* m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the opcode being
examined.
David MacKenzie [Thu, 28 Apr 1994 22:04:49 +0000 (22:04 +0000)]
* configure.in: Only set host_makefile_frag if config
directory exists.
Bill Cox [Thu, 28 Apr 1994 21:49:40 +0000 (21:49 +0000)]
Back-migrate minor changes in these files from 94Q1 progressive into devo:
dejagnu/ChangeLog, dejagnu/Makefile.in,
dejagnu/example/calc/Makefile.in, dejagnu/lib/remote.exp,
dejagnu/testsuite/Makefile.in,
dejagnu/testsuite/runtest.all/options.exp,
gcc/testsuite/config/unix.exp, gdb/testsuite/Makefile.in,
ld/ChangeLog, newlib/testsuite/ChangeLog, texinfo/testsuite/ChangeLog
Jim Kingdon [Thu, 28 Apr 1994 21:43:10 +0000 (21:43 +0000)]
* annotate.texi: New file, to document annotations.
Jim Kingdon [Thu, 28 Apr 1994 21:38:15 +0000 (21:38 +0000)]
* utils.c, defs.h (error_begin): New function.
(quit): Print annotation before printing the error message.
* main.c (return_to_top_level): Print annotation before doing the
longjmp.
* symtab.c (decode_line_1): Call error not warning and then
return_to_top_level. Call error_begin and printf_unfiltered
rather calling warning (before calls to return_to_top_level).
* core.c (memory_error): Use error_begin, printf_unfiltered,
print_address_numeric and return_to_top_level instead of error.
Cleans up a FIXME-32x64.
* language.c (type_error, range_error): Call error_begin
not just target_terminal_ours.
Jim Kingdon [Thu, 28 Apr 1994 20:10:45 +0000 (20:10 +0000)]
* dbxread.c (stabsect_build_psymtabs): Assign to sym_stab_info
directly, rather than via DBX_SYMFILE_INFO. A cast on the left
side of an assignment is non-portable.
Jim Kingdon [Thu, 28 Apr 1994 19:47:46 +0000 (19:47 +0000)]
add gdba.el
Jim Kingdon [Thu, 28 Apr 1994 19:46:25 +0000 (19:46 +0000)]
x
Jim Kingdon [Thu, 28 Apr 1994 19:43:30 +0000 (19:43 +0000)]
* annotate.texi: New file, to document annotations.
Jim Kingdon [Thu, 28 Apr 1994 18:34:29 +0000 (18:34 +0000)]
Oops, wrong file name
Jim Kingdon [Thu, 28 Apr 1994 18:34:28 +0000 (18:34 +0000)]
new, emacs gdb mode with annotation stuff
Jim Kingdon [Thu, 28 Apr 1994 16:54:02 +0000 (16:54 +0000)]
* annotate.texi: New file, to document annotations.
Jim Kingdon [Thu, 28 Apr 1994 16:04:36 +0000 (16:04 +0000)]
(prompt_for_continue): Likewise for prompt-for-continue annotation.
Jim Kingdon [Thu, 28 Apr 1994 15:48:15 +0000 (15:48 +0000)]
* utils.c (query): Change syntax of query annotations to be
consistent with other input annotations.
Jim Kingdon [Thu, 28 Apr 1994 14:43:44 +0000 (14:43 +0000)]
new, to document annotations
Peter Schauer [Thu, 28 Apr 1994 08:29:22 +0000 (08:29 +0000)]
* mdebugread.c (psymtab_to_symtab_1): Do not call sort_blocks
for stabs symtabs.
* mips-tdep.c (mips_skip_prologue): Handle prologues for functions
that have a stack frame size of 32k or larger (from Paul Flinders).
Remove #if 0'd code.
Ken Raeburn [Thu, 28 Apr 1994 06:25:53 +0000 (06:25 +0000)]
* config/tc-mips.c (s_option): Only refer to g_switch_* variables if GPOPT is
defined.
(s_abicalls): Ditto.
(md_apply_fix): Cast char* to unsigned char* to avoid pointer mismatch.
Stan Shebs [Wed, 27 Apr 1994 23:35:49 +0000 (23:35 +0000)]
Wed Apr 27 16:33:51 1994 Stan Shebs (shebs@andros.cygnus.com)
* lynx-nat.c (CANNOT_STORE_REGISTER): Add a fallback definition
for Lynx platforms that need it.
* config/nm-lynx.h (__LYNXOS): Define if not already defined.
Jim Kingdon [Wed, 27 Apr 1994 23:10:26 +0000 (23:10 +0000)]
* procfs.c (procfs_wait): Use the signal from the pr_info rather
than trying to deduce it from the fault.
Ian Lance Taylor [Wed, 27 Apr 1994 20:04:55 +0000 (20:04 +0000)]
* scripttempl/sa29200.sc: Align all sections to four byte
boundaries.
Steve Chamberlain [Wed, 27 Apr 1994 19:31:08 +0000 (19:31 +0000)]
* printcmd.c (print_address_symbolic): Initialize name to empty
string to avoid core dump if lookup fails.
* remote-e7000.c (printf_e7000debug): Error if target not open.
David MacKenzie [Wed, 27 Apr 1994 19:19:56 +0000 (19:19 +0000)]
* install.sh: If $dstdir exists, don't check whether each component does.
Steve Chamberlain [Wed, 27 Apr 1994 18:30:33 +0000 (18:30 +0000)]
* h8300.h (dec, inc): Get encoding right.
Steve Chamberlain [Wed, 27 Apr 1994 18:27:18 +0000 (18:27 +0000)]
* Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
* coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
sysroff.info: Major changes.
Steve Chamberlain [Wed, 27 Apr 1994 18:19:42 +0000 (18:19 +0000)]
Fix dos on H'digits..
Steve Chamberlain [Wed, 27 Apr 1994 18:15:14 +0000 (18:15 +0000)]
* configure.in (i386-*-go32): Uses coff now.
* gasp.c (main): Now takes -D on command line.
(show_usage): Describe new options.
Steve Chamberlain [Wed, 27 Apr 1994 18:03:31 +0000 (18:03 +0000)]
More testcases.
Steve Chamberlain [Wed, 27 Apr 1994 17:52:13 +0000 (17:52 +0000)]
* Makefile.in, configure.in: Support for go32 coff.
* config/i386-go32.mt: New file
* emulparams/i386go32.sh: New file
* scripttempl/i386go32.sc: New file
Ken Raeburn [Wed, 27 Apr 1994 17:19:58 +0000 (17:19 +0000)]
Trying to make yesterday's "simplification" actually work...
Stu Grossman [Wed, 27 Apr 1994 05:50:42 +0000 (05:50 +0000)]
* nlm/gdbserve.c (putDebugChar): Install bug fix from i386-nlmstub.
* (hex2mem): Init ptr.
* General cleanups to use ConsolePrintf, standard prologues, etc...
Stu Grossman [Wed, 27 Apr 1994 05:50:14 +0000 (05:50 +0000)]
* i386-nlmstub.c: Update to be more in line with PIN stub.
* nlm/gdbserve.c (putDebugChar): Install bug fix from i386-nlmstub.
* (hex2mem): Init ptr.
* General cleanups to use ConsolePrintf, standard prologues, etc...
Jeff Law [Wed, 27 Apr 1994 05:24:08 +0000 (05:24 +0000)]
* gdb.t17/callfuncs.exp: More comments about t_func_values tests.
* gdb.t17/gdbme.c (t_func_values): Add comments about how and why
the code has been restructured.
Stu Grossman [Wed, 27 Apr 1994 01:39:38 +0000 (01:39 +0000)]
[Sharp eyes, Jim...]
* remote.c:
* (get_offsets): Temporary kludge to force data & bss sections to
have the same relocation.
Stan Shebs [Wed, 27 Apr 1994 01:27:49 +0000 (01:27 +0000)]
Remove new Mac files.
Stan Shebs [Wed, 27 Apr 1994 01:21:56 +0000 (01:21 +0000)]
Tue Apr 26 18:18:24 1994 Stan Shebs (shebs@andros.cygnus.com)
* objdump.c (print_section_stabs): Indicate the stab header symbol
more clearly, print numbers of unrecognized stab n_type values.
Stan Shebs [Wed, 27 Apr 1994 01:17:25 +0000 (01:17 +0000)]
Tue Apr 26 18:10:40 1994 Stan Shebs (shebs@andros.cygnus.com)
* mpw-xconfig.in (archname): Only set ARCH_mips if targeting Mips.
Stan Shebs [Wed, 27 Apr 1994 00:55:59 +0000 (00:55 +0000)]
Tue Apr 26 17:44:27 1994 Stan Shebs (shebs@andros.cygnus.com)
* mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb.
(XDEPFILES): Define.
(main.c.o): Compile with gC instead of C.
* mac-defs.h: New file, menu etc definitions shared between
C and Rez files.
* macgdb.r: New file, Rez (resource compiler) resource
definitions.
* mac-xdep.c: New file, Mac host interface code.
* config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to
DIRNAME_SEPARATOR.
(PATHNAME_SEPARATOR_STRING): Remove.
(SIGQUIT, SIGHUP): Define.
(fileno, R_OK): Define.
Stan Shebs [Wed, 27 Apr 1994 00:31:11 +0000 (00:31 +0000)]
Tue Apr 26 17:20:03 1994 Stan Shebs (shebs@andros.cygnus.com)
* Makefile.in (em_m68klynx.c, em_i386lynx.c, em_sparclynx.c): Use
Lynx-specific script templates.
* configure.in (sparclite*-*-coff): Use coff-sparc.
* emulparams/i386lynx.sh (SCRIPT_NAME): Set to i386lynx.
* emulparams/sparclynx.sh (SCRIPT_NAME): Set to sparclynx.
(ENTRY): Set to __main.
* scripttempl/i386lynx.sc: New file, script for I386 Lynx.
* scripttempl/m68klynx.sc: Add insertion of ctor/dtor sections.
* scripttempl/sparclynx.sc: New file, script for uSparc Lynx.
This page took 0.03928 seconds and 4 git commands to generate.