Vaishali Thakkar [Fri, 26 Jun 2015 04:34:37 +0000 (01:34 -0300)]
[media] pctv452e: Replace memset with eth_zero_addr
Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Note that the 6 in the third argument of memset appears to represent
an ethernet address size (ETH_ALEN).
The Coccinelle semantic patch that makes this change is as follows:
// <smpl>
@eth_zero_addr@
expression e;
@@
-memset(e,0x00,6);
+eth_zero_addr(e);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geert Uytterhoeven [Mon, 29 Jun 2015 13:46:49 +0000 (10:46 -0300)]
[media] tuners: Make all TV tuners visible if COMPILE_TEST=y
Make the TV tuners menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.
Without this, many drivers stay disabled during e.g. allmodconfig.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Vaishali Thakkar [Fri, 26 Jun 2015 04:47:49 +0000 (01:47 -0300)]
[media] ttpci: Replace memset with eth_zero_addr
Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Note that the 6 in the third argument of memset appears to represent
an ethernet address size (ETH_ALEN).
The Coccinelle semantic patch that makes this change is as follows:
// <smpl>
@eth_zero_addr@
expression e;
@@
-memset(e,0x00,6);
+eth_zero_addr(e);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Maninder Singh [Thu, 25 Jun 2015 09:58:58 +0000 (06:58 -0300)]
[media] usb/airspy: removing unneeded goto
This patch removes unneded goto,
reported by coccinelle.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Akhilesh Kumar <akhilesh.k@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geert Uytterhoeven [Mon, 29 Jun 2015 13:46:48 +0000 (10:46 -0300)]
[media] i2c: Make all i2c devices visible if COMPILE_TEST=y
Make the i2c devices menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.
Without this, many drivers stay disabled during e.g. allmodconfig.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geert Uytterhoeven [Mon, 29 Jun 2015 13:46:47 +0000 (10:46 -0300)]
[media] dvb-frontends: Make all DVB Frontends visible if COMPILE_TEST=y
Make the DVB Frontends menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.
Without this, many drivers stay disabled during e.g. allmodconfig.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Luis R. Rodriguez [Wed, 24 Jun 2015 17:23:20 +0000 (14:23 -0300)]
[media] x86/mm/pat, drivers/media/ivtv: move pat warn and replace WARN() with pr_warn()
On built-in kernels this warning will always splat as this is part
of the module init. Fix that by shifting the PAT requirement check
out under the code that does the "quasi-probe" for the device. This
device driver relies on an existing driver to find its own devices,
it looks for that device driver and its own found devices, then
uses driver_for_each_device() to try to see if it can probe each of
those devices as a frambuffer device with ivtvfb_init_card(). We
tuck the PAT requiremenet check then on the ivtvfb_init_card()
call making the check at least require an ivtv device present
before complaining.
Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot]
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antonio Borneo [Tue, 23 Jun 2015 14:53:19 +0000 (11:53 -0300)]
[media] s5c73m3: Remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Hałasa [Fri, 19 Jun 2015 10:20:40 +0000 (07:20 -0300)]
[media] pci/Kconfig: don't use MEDIA_ANALOG_TV_SUPPORT for grabber cards
I noticed certain cards are currently under MEDIA_ANALOG_TV_SUPPORT
but it seems they are frame grabbers (with CVBS, Svideo etc. inputs)
rather than TV receivers (with analog TV tuners).
MEDIA_CAMERA_SUPPORT maybe isn't the best name (only "meye" driver seems
to drive a real camera in a laptop) but it at least doesn't select the
TUNERs.
Perhaps the following patch would make sense.
Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 13:30:24 +0000 (10:30 -0300)]
[media] mantis: remove an uneeded goto
Gotos makes a little harder to check the code. In this
particular case, the goto is doing nothing but jumping into
a return.
Instead, just replace the goto by the return, making it
simpler.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fabio Estevam [Mon, 10 Aug 2015 17:11:41 +0000 (14:11 -0300)]
[media] mantis: Fix error handling in mantis_dma_init()
Current code assigns 0 to variable 'err', which makes mantis_dma_init()
to return success even if mantis_alloc_buffers() fails.
Fix it by checking the return value from mantis_alloc_buffers() and
propagating it in the case of error.
Reported-by: RUC_Soft_Sec <zy900702@163.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Tue, 28 Jul 2015 08:33:55 +0000 (05:33 -0300)]
[media] mt9v032: fix uninitialized variable warning
drivers/media/i2c/mt9v032.c: In function ‘mt9v032_probe’:
CC [M] drivers/media/i2c/s5k4ecgx.o
drivers/media/i2c/mt9v032.c:996:20: warning: ‘pdata’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (pdata && pdata->link_freqs) {
^
It can indeed be uninitialized in one corner case. Initialize to NULL.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 6 Aug 2015 12:38:02 +0000 (09:38 -0300)]
[media] v4l2: move tracepoint generation into separate file
To compile videobuf2-core as a module, the vb2_* tracepoints must be
exported from the videodev module. Instead of exporting vb2 tracepoint
symbols from v4l2-ioctl.c, move the tracepoint generation into a separate
file. This patch fixes the following build error in the modpost stage,
introduced by
2091f5181c66 ("[media] videobuf2: add trace events"):
ERROR: "__tracepoint_vb2_buf_done" undefined!
ERROR: "__tracepoint_vb2_dqbuf" undefined!
ERROR: "__tracepoint_vb2_qbuf" undefined!
ERROR: "__tracepoint_vb2_buf_queue" undefined!
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Prashant Laddha [Mon, 3 Aug 2015 08:36:43 +0000 (05:36 -0300)]
[media] vivid: support cvt, gtf timings for video out
The generation of cvt, gtf timings is already supported by v4l2-ctl.
This patch adds support for setting cvt,gtf timings for video out.
While enabling cvt,gtf in vivid capture, the vivid video out was
missed out. Adding it now.
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
William Towle [Thu, 23 Jul 2015 12:21:34 +0000 (09:21 -0300)]
[media] media: adv7604: reduce support to first (digital) input
Using adv7611_read_cable_det() for ADV7612 means that full
support for '.max_port = ADV7604_PAD_HDMI_PORT_B,' isn't available
due to the need for multiple port reads to determine cable detection,
and an agreed mechanism for communicating the separate statuses.
This patch replaces adv7611_read_cable_det() with a functionally
identical copy, commented appropriately.
Earlier submissions [leading to commit
8331d30b] also set .cp_csc,
which is used in a cp_read() call within adv76xx_log_status().
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
William Towle [Thu, 23 Jul 2015 12:21:33 +0000 (09:21 -0300)]
[media] media: adv7604: fix probe of ADV7611/7612
Prior to commit
f862f57d ("[media] media: i2c: ADV7604: Migrate to
regmap"), the local variable 'val' contained the combined register
reads used in the chipset version ID test. Restore this expectation
so that the comparison works as it used to.
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:40 +0000 (08:33 -0300)]
[media] soc_camera: always release queue for queue owner
Always release the queue if the owner closes its filehandle and not when
it is the last open filehandle.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:39 +0000 (08:33 -0300)]
[media] soc_camera: pass on streamoff error
If streamoff returned an error, then pass that on to the caller.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:38 +0000 (08:33 -0300)]
[media] soc_camera: compliance fixes
- REQBUFS(0) will stop streaming, free buffers and release the file ownership.
- Return ENOTTY for create_bufs for a vb1 driver
- Return EBUSY if there is a different streaming owner and set the new owner on
success.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:37 +0000 (08:33 -0300)]
[media] soc_camera: fix expbuf support
- For vb1 drivers just return -ENOTTY.
- For vb2 drivers allow vb2_expbuf without there being a stream owner:
the vb2_expbuf function will return the correct error message in that case.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:36 +0000 (08:33 -0300)]
[media] soc_camera: fix enum_input
Fill in the std field from the video_device tvnorms field.
This fixes a v4l2-compliance failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:35 +0000 (08:33 -0300)]
[media] sh_mobile_ceu_camera: set field to FIELD_NONE
Make sure that 'field' isn't FIELD_ANY when the driver is
first loaded. Fixes a v4l2-compliance failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:34 +0000 (08:33 -0300)]
[media] sh_mobile_ceu_camera: fix querycap
Fill in the bus_info and driver fields. Found by v4l2-compliance.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:33 +0000 (08:33 -0300)]
[media] mt9t112: JPEG -> SRGB
The JPEG colorspace should only be used for JPEG encoded images. This is
just a regular sRGB sensor.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:32 +0000 (08:33 -0300)]
[media] ak881x: simplify standard checks
Simplify confusing conditions. This also swaps the checks for NTSC and PAL:
to be consistent with other drivers check for NTSC first. So if the user
sets both NTSC and PAL bits, then NTSC wins.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:31 +0000 (08:33 -0300)]
[media] tw9910: init priv->scale and update standard
When the standard changes the VACTIVE and VDELAY values need to be updated.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:30 +0000 (08:33 -0300)]
[media] tw9910: don't use COLORSPACE_JPEG
This is an SDTV video receiver, so the colorspace should be SMPTE170M.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:28 +0000 (08:33 -0300)]
[media] sh-veu: initialize timestamp_flags and copy timestamp info
This field wasn't set, causing WARN_ON's from the vb2 core.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 21 Apr 2015 14:14:44 +0000 (11:14 -0300)]
[media] tda10071: implement DVBv5 statistics
Implement DVBv5 CNR, signal strength, BER and block errors.
Wrap legacy DVBv3 statistics to DVBv5 internally.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 21 Apr 2015 14:16:44 +0000 (11:16 -0300)]
[media] tda10071: do not get_frontend() when not ready
This is a bit hack, but returning error when driver is not tuned yet
causes DVBv5 zap stop polling DVBv5 statistics. Thus return 0 even
callback is called during invalid device state.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 21 Apr 2015 12:58:15 +0000 (09:58 -0300)]
[media] tda10071: protect firmware command exec with mutex
There should be clearly some lock in order to make sure firmware
command in execution is not disturbed by another command. It has
worked as callbacks are serialized somehow pretty well and command
execution happens usually without any delays.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 21 Apr 2015 01:21:44 +0000 (22:21 -0300)]
[media] tda10071: convert to regmap I2C API
Use regmap API for I2C operations.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 23:04:00 +0000 (20:04 -0300)]
[media] tda10071: rename device state struct to dev
Rename device state struct from 'priv' to 'dev'.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 22:54:56 +0000 (19:54 -0300)]
[media] tda10071: remove legacy media attach
All users are now using I2C binding and old attach could be removed.
Use I2C client for proper logging at the same.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 21:57:03 +0000 (18:57 -0300)]
[media] a8293: coding style issues
Remove FSF address from license. Indent parameter correctly.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 21:47:44 +0000 (18:47 -0300)]
[media] a8293: improve LNB register programming logic
On power-on LNB power supply voltage is disabled, due to that no
need to disable it during probe. Tone is supply is hard-coded as
external tone coming from the demodulator. Program both voltage
and tone on set_voltage(). Use register cache to prevent unneeded
programming.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 21:16:19 +0000 (18:16 -0300)]
[media] a8293: use i2c_master_send / i2c_master_recv for I2C I/O
As driver is now proper I2C client driver, we could use correct
functions for I2C I/O. Also rename state from priv to dev. Fix
logging too.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 20:39:33 +0000 (17:39 -0300)]
[media] a8293: remove legacy media attach
Remove legacy media attach as all users are on I2C bindings now.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Fri, 17 Apr 2015 01:55:31 +0000 (22:55 -0300)]
[media] em28xx: remove unused a8293 SEC config
Devices that were using a8293 SEC are converted to I2C platform data
thus that old config structure is left unused.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:18:22 +0000 (10:18 -0300)]
[media] bt819/saa7110/vpx3220: remove legacy control ops
The zoran driver has now been converted to the control framework
which means that these three subdevice drivers no longer need to
support the legacy core control ops since the last bridge driver
that needed that has now been converted.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:18:21 +0000 (10:18 -0300)]
[media] zoran: convert to the control framework and to v4l2_fh
Switch this driver to the control framework and to v4l2_fh for
handling control events.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:18:20 +0000 (10:18 -0300)]
[media] zoran: use standard core lock
Use the standard core lock to take care of serializing ioctl calls and
to serialize file operations.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:18:19 +0000 (10:18 -0300)]
[media] zoran: remove unused read/write functions
The zoran_read/write functions always return an error. Just remove them.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:18:18 +0000 (10:18 -0300)]
[media] zoran: remove unnecessary memset
There is no need to zero the v4l2_capability struct, the v4l2 core has done
that already.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:09:33 +0000 (10:09 -0300)]
[media] fsl-viu: drop format names
The names of the pixelformats is set by the core. So there no longer
is any need for drivers to fill it in.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:09:32 +0000 (10:09 -0300)]
[media] fsl-viu: small fixes
- Fix an off-by-one index check in vidioc_enum_fmt()
- Fill in the pix.sizeimage field in vidioc_try_fmt_cap()
- Fix an off-by-one index check in vidioc_s_input()
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:09:31 +0000 (10:09 -0300)]
[media] fsl-viu: add control event support
Convert the driver to use v4l2_fh in order to support control events.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:09:30 +0000 (10:09 -0300)]
[media] fsl-viu: fill in colorspace, always set field to interlaced
- fill in the missing colorspace value.
- don't reject incorrect field values, always replace with a valid value.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:09:29 +0000 (10:09 -0300)]
[media] fsl-viu: fill in bus_info in vidioc_querycap
The bus_info field was never filled.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 13:09:28 +0000 (10:09 -0300)]
[media] fsl-viu: convert to the control framework
Interestingly enough, the existing control handling code basically did
nothing. At least the new code will inherit the controls from the
saa7115 driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:38 +0000 (09:59 -0300)]
[media] usbvision: move init code to probe()
These things are only initialized if you start streaming video, but
they are also used in the disconnect function. So just init them
always during probe time.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:37 +0000 (09:59 -0300)]
[media] usbvision: fix standards for S-Video/Composite inputs
The standards supported by S-Video and Composite inputs are not
limited by PAL, so make it more generic.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:36 +0000 (09:59 -0300)]
[media] usbvision: fix DMA from stack warnings
In various places the stack was used to provide buffers for USB data, but
this should be allocated memory.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:35 +0000 (09:59 -0300)]
[media] usbvision: fix locking error
If remove_pending is non-zero, then the v4l2_lock is never unlocked.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:34 +0000 (09:59 -0300)]
[media] usbvision: set field and colorspace
Set the colorspace and field in vidioc_try_fmt_vid_cap().
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:33 +0000 (09:59 -0300)]
[media] usbvision: frequency fixes
- setup initial radio and tv frequencies.
- set/get the correct frequency (radio vs tv).
- disable tuner/freq ioctls if there is no tuner.
- fix some tuner index checks.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:32 +0000 (09:59 -0300)]
[media] usbvision: the radio device node has wrong caps
The radio device node had the same caps as the video node. Fix this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:31 +0000 (09:59 -0300)]
[media] usbvision: remove g/s_audio and for radio remove enum/g/s_input
The g/s_audio ioctls didn't do anything, so remove them all for both
video and radio nodes and remove V4L2_CAP_AUDIO.
The enum/g/s_input ioctls are invalid for radio nodes, so remove them
from the radio ioctl_ops.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:30 +0000 (09:59 -0300)]
[media] usbvision: return valid error in usbvision_register_video()
Don't return -1, return a proper error code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:29 +0000 (09:59 -0300)]
[media] usbvision: convert to the control framework
Convert this driver to the control framework and struct v4l2_fh
(needed for handling control events).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 12:59:28 +0000 (09:59 -0300)]
[media] usbvision: remove power_on_at_open and timed power off
This causes lots of problems and is *very* slow as well.
One of the main problems is that this prohibits the use of the control
framework since subdevs will be unloaded on power off which is not allowed
as long as they are used by a usb device.
Apparently the reason for doing this is to turn off a noisy tuner. My hardware
has no problem with that, and I wonder whether the hardware with that noisy
tuner wasn't just functioning improperly as I have never heard of noisy tuners.
Contact me if you have one of those devices and I can take a look whether the
tuner can't be powered off if necessary by letting the tuner subdevice go
into standby mode. Unloading the tuner module is just evil and is not the
right approach.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Masanari Iida [Mon, 13 Jul 2015 23:36:50 +0000 (20:36 -0300)]
[media] DocBook: Fix typo in intro.xml
This patch fix spelling typos in intro.xml.
This xml file is not created from comments within source,
I fix the xml file.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
[hans.verkuil@cisco.com: removed mention of obsolete devfs]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mikhail Ulyanov [Wed, 22 Jul 2015 11:23:05 +0000 (08:23 -0300)]
[media] MAINTAINERS: V4L2: PLATFORM: Add entry for Renesas JPEG Processing Unit driver
Update RENESAS JPU driver maintainer in MAINTAINERS file.
Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mikhail Ulyanov [Wed, 22 Jul 2015 11:23:03 +0000 (08:23 -0300)]
[media] V4L2: platform: Add Renesas R-Car JPEG codec driver
Here's the driver for the Renesas R-Car JPEG processing unit.
The driver is implemented within the V4L2 framework as a memory-to-memory
device. It presents two video nodes to userspace, one for the encoding part,
and one for the decoding part.
It was found that the only working mode for encoding is no markers output, so we
generate markers with software. In the current version of driver we also use
software JPEG header parsing because with hardware parsing performance is lower
than desired.
>From a userspace point of view the process is typical (S_FMT, REQBUF,
optionally QUERYBUF, QBUF, STREAMON, DQBUF) for both the source and destination
queues. STREAMON can return -EINVAL in case of mismatch of output and capture
queues format. Also during decoding driver can return buffers if queued
buffer with JPEG image contains image with inappropriate subsampling (e.g.
4:2:0 in JPEG and 4:2:2 in capture). If JPEG image and queue format dimensions
differ driver will return buffer on QBUF with VB2_BUF_STATE_ERROR flag.
During encoding the available formats are: V4L2_PIX_FMT_NV12M,
V4L2_PIX_FMT_NV12, V4L2_PIX_FMT_NV16, V4L2_PIX_FMT_NV16M for source and
V4L2_PIX_FMT_JPEG for destination.
During decoding the available formats are: V4L2_PIX_FMT_JPEG for source and
V4L2_PIX_FMT_NV12M, V4L2_PIX_FMT_NV16M, V4L2_PIX_FMT_NV12, V4L2_PIX_FMT_NV16
for destination.
Performance of current version:
1280x800 NV12 image encoding/decoding
decoding ~122 FPS
encoding ~191 FPS
Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mikhail Ulyanov [Wed, 22 Jul 2015 11:23:04 +0000 (08:23 -0300)]
[media] devicetree: bindings: Document Renesas R-Car JPEG Processing Unit
Add Renesas R-Car JPEG processing unit driver device tree bindings
documentation.
Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Laura Abbott [Thu, 23 Jul 2015 22:28:48 +0000 (19:28 -0300)]
[media] v4l2-ioctl: Give more information when device_caps are missing
Currently, the warning for missing device_caps gives a backtrace like so:
[<
ffffffff8175c199>] dump_stack+0x45/0x57
[<
ffffffff8109ad5a>] warn_slowpath_common+0x8a/0xc0
[<
ffffffff8109ae8a>] warn_slowpath_null+0x1a/0x20
[<
ffffffffa0237453>] v4l_querycap+0x43/0x80 [videodev]
[<
ffffffffa0237734>] __video_do_ioctl+0x2a4/0x320 [videodev]
[<
ffffffff812207e5>] ? do_last+0x195/0x1210
[<
ffffffffa023a11e>] video_usercopy+0x22e/0x5b0 [videodev]
[<
ffffffffa0237490>] ? v4l_querycap+0x80/0x80 [videodev]
[<
ffffffffa023a4b5>] video_ioctl2+0x15/0x20 [videodev]
[<
ffffffffa0233733>] v4l2_ioctl+0x113/0x150 [videodev]
[<
ffffffff81225798>] do_vfs_ioctl+0x2f8/0x4f0
[<
ffffffff8113b2d4>] ? __audit_syscall_entry+0xb4/0x110
[<
ffffffff81022d7c>] ? do_audit_syscall_entry+0x6c/0x70
[<
ffffffff81225a11>] SyS_ioctl+0x81/0xa0
[<
ffffffff8113b526>] ? __audit_syscall_exit+0x1f6/0x2a0
[<
ffffffff81763549>] system_call_fastpath+0x12/0x17
This indicates that device_caps are missing but doesn't give
much of a clue which driver is actually at fault. Improve
the warning output by showing the capabilities and the
responsible driver.
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 09:47:23 +0000 (06:47 -0300)]
[media] tc358743: remove unused variable
The bt pointer was never used, remove it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 20 Jul 2015 07:58:24 +0000 (04:58 -0300)]
[media] v4l2-mem2mem: drop lock in v4l2_m2m_fop_mmap
The v4l2_m2m_fop_mmap function takes the core mutex, but this will result in a potential
circular locking dependency:
[ 262.517164] ======================================================
[ 262.517166] [ INFO: possible circular locking dependency detected ]
[ 262.517169] 4.2.0-rc2-koryphon #844 Not tainted
[ 262.517171] -------------------------------------------------------
[ 262.517173] v4l2-compliance/1379 is trying to acquire lock:
[ 262.517175] (&dev->dev_mutex){+.+.+.}, at: [<
ffffffffa000ddab>] v4l2_m2m_fop_mmap+0x2b/0x90 [v4l2_mem2mem]
[ 262.517187]
but task is already holding lock:
[ 262.517189] (&mm->mmap_sem){++++++}, at: [<
ffffffff81159309>] vm_mmap_pgoff+0x69/0xc0
[ 262.517199]
which lock already depends on the new lock.
[ 262.517202]
the existing dependency chain (in reverse order) is:
[ 262.517204]
-> #1 (&mm->mmap_sem){++++++}:
[ 262.517209] [<
ffffffff810d0e6b>] __lock_acquire+0x62b/0xe80
[ 262.517215] [<
ffffffff810d2095>] lock_acquire+0x65/0x90
[ 262.517218] [<
ffffffff811612e5>] __might_fault+0x75/0xa0
[ 262.517222] [<
ffffffffa06dead9>] video_usercopy+0x3e9/0x4e0 [videodev]
[ 262.517231] [<
ffffffffa06debe0>] video_ioctl2+0x10/0x20 [videodev]
[ 262.517238] [<
ffffffffa06d8663>] v4l2_ioctl+0xc3/0xe0 [videodev]
[ 262.517243] [<
ffffffff811a8cac>] do_vfs_ioctl+0x2fc/0x550
[ 262.517248] [<
ffffffff811a8f74>] SyS_ioctl+0x74/0x80
[ 262.517252] [<
ffffffff81a4d2ee>] entry_SYSCALL_64_fastpath+0x12/0x76
[ 262.517258]
-> #0 (&dev->dev_mutex){+.+.+.}:
[ 262.517262] [<
ffffffff810cf464>] validate_chain.isra.38+0xd04/0x1170
[ 262.517266] [<
ffffffff810d0e6b>] __lock_acquire+0x62b/0xe80
[ 262.517270] [<
ffffffff810d2095>] lock_acquire+0x65/0x90
[ 262.517273] [<
ffffffff81a48e3c>] mutex_lock_interruptible_nested+0x6c/0x4b0
[ 262.517279] [<
ffffffffa000ddab>] v4l2_m2m_fop_mmap+0x2b/0x90 [v4l2_mem2mem]
[ 262.517284] [<
ffffffffa06d80ff>] v4l2_mmap+0x4f/0x90 [videodev]
[ 262.517288] [<
ffffffff8116b06c>] mmap_region+0x38c/0x5b0
[ 262.517293] [<
ffffffff8116b585>] do_mmap_pgoff+0x2f5/0x3e0
[ 262.517297] [<
ffffffff8115932a>] vm_mmap_pgoff+0x8a/0xc0
[ 262.517300] [<
ffffffff81169bab>] SyS_mmap_pgoff+0x1cb/0x270
[ 262.517304] [<
ffffffff8100876d>] SyS_mmap+0x1d/0x20
[ 262.517309] [<
ffffffff81a4d2ee>] entry_SYSCALL_64_fastpath+0x12/0x76
[ 262.517313]
other info that might help us debug this:
[ 262.517315] Possible unsafe locking scenario:
[ 262.517318] CPU0 CPU1
[ 262.517319] ---- ----
[ 262.517321] lock(&mm->mmap_sem);
[ 262.517324] lock(&dev->dev_mutex);
[ 262.517327] lock(&mm->mmap_sem);
[ 262.517329] lock(&dev->dev_mutex);
[ 262.517332]
*** DEADLOCK ***
Since vb2_fop_mmap doesn't take the lock, neither should v4l2_m2m_fop_mmap.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Andrzej Pietrasiewicz [Fri, 3 Jul 2015 10:04:38 +0000 (07:04 -0300)]
[media] s5p-jpeg: Eliminate double kfree()
video_unregister_device() calls device_unregister(), which calls
put_device(), which calls kobject_put(), and if this is the last reference
then kobject_release() is called, which calls kobject_cleanup(), which
calls ktype's release method which happens to be device_release() in this
case, which calls dev->release(), which happens to be
v4l2_device_release() in this case, which calls vdev->release(), which
happens to be video_device_release(). But video_device_release() is
called explicitly both in error recovery path of s5p_jpeg_probe() and
in s5p_jpeg_remove(). The pointers in question are not nullified between
the two calls, so this is harmful.
This patch fixes the driver so that video_device_release() is not called
twice for the same object.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Marek Szyprowski [Wed, 3 Jun 2015 10:36:23 +0000 (07:36 -0300)]
[media] s5p-mfc: add additional check for incorrect memory configuration
MFC hardware is known to trash random memory if one tries to use a
buffer which has lower DMA addresses than the configured DMA base
address. This patch adds a check for this case and proper error
handling.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Kamil Debski <kamil@wypas.org>
[s.nawrocki@samsung.com: fixed typo (addres -> address]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Marek Szyprowski [Wed, 3 Jun 2015 10:36:22 +0000 (07:36 -0300)]
[media] s5p-mfc: add return value check in mfc_sys_init_cmd
alloc_dev_context_buffer method might fail, so add proper
return value check.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Seung-Woo Kim [Wed, 13 May 2015 07:25:25 +0000 (04:25 -0300)]
[media] s5p-mfc: fix state check from encoder queue_setup
MFCINST_GOT_INST state is set to encoder context with set_format
only for capture buffer. In queue_setup of encoder called during
reqbufs, it is checked MFCINST_GOT_INST state for both capture
and output buffer. So this patch fixes encoder to check
MFCINST_GOT_INST state only for capture buffer from queue_setup.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Nicholas Mc Guire [Wed, 10 Jun 2015 09:02:03 +0000 (06:02 -0300)]
[media] s5p-tv: fix wait_event_timeout return handling
event API conformance testing with coccinelle spatches are being
used to locate API usage inconsistencies this triggert with:
./drivers/media/platform/s5p-tv/mixer_reg.c:364
incorrect check for negative return
Return type of wait_event_timeout is signed long not int and the
return type is >=0 always thus the negative check is unnecessary.
An appropriately named variable of type long is inserted and the
call fixed up aswell as the negative return check dropped.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:19:45 +0000 (03:19 -0300)]
[media] s5p-tv: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Vaishali Thakkar [Sat, 20 Jun 2015 02:58:17 +0000 (23:58 -0300)]
[media] dvb_core: Replace memset with eth_zero_addr
Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
The Coccinelle semantic patch that makes this change is as follows:
// <smpl>
@eth_zero_addr@
expression e;
@@
-memset(e,0x00,ETH_ALEN);
+eth_zero_addr(e);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sunil Shahu [Sat, 20 Jun 2015 08:53:50 +0000 (05:53 -0300)]
[media] staging: media: lirc: fix coding style error
Fix code indentation error by replacing tab in place of spaces.
Signed-off-by: Sunil Shahu <shshahu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:29 +0000 (08:33 -0300)]
[media] sh-veu: don't use COLORSPACE_JPEG
COLORSPACE_JPEG should only be used for JPEGs. Use SMPTE170M instead,
which is how YCbCr images are usually encoded.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Joe Perches [Mon, 15 Jun 2015 02:01:45 +0000 (23:01 -0300)]
[media] media: ttpci: Use vsprintf %pM extension
Format mac addresses with the normal kernel extension.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 17 Jul 2015 15:26:45 +0000 (12:26 -0300)]
[media] tc358743: allow event subscription
This is useful to subscribe to HDMI hotplug events via the
V4L2_CID_DV_RX_POWER_PRESENT control.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 17 Jul 2015 14:02:56 +0000 (11:02 -0300)]
[media] tc358743: add direct interrupt handling
When probed from device tree, the i2c client driver can handle the interrupt
on its own.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 17 Jul 2015 14:02:55 +0000 (11:02 -0300)]
[media] tc358743: support probe from device tree
Add support for probing the TC358743 subdevice from device tree.
The reference clock must be supplied using the common clock bindings.
MIPI CSI-2 specific properties are parsed from the OF graph endpoint
node and support for a non-continuous MIPI CSI-2 clock is added.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 17 Jul 2015 14:02:54 +0000 (11:02 -0300)]
[media] tc358743: enable v4l2 subdevice devnode
Add V4L2_SUBDEV_FL_HAS_DEVNODE to subdev flags, in order to
enable a subdev device node.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 17 Jul 2015 14:02:53 +0000 (11:02 -0300)]
[media] tc358743: register v4l2 asynchronous subdevice
Add support for registering the sensor subdevice using the v4l2-async API.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 17 Jul 2015 11:45:22 +0000 (08:45 -0300)]
[media] cobalt: allow fewer than 8 PCIe lanes
Currently the cobalt driver refuses to load if fewer than 8 PCIe lanes
are assigned. This patch changes this and just issues a warning. The
only time it will refuse to load is if the number of assigned lanes is less
than what the PCIe host is capable of since this suggests that the card
isn't seated correctly in the slot.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 17 Jul 2015 11:29:40 +0000 (08:29 -0300)]
[media] cobalt: accept unchanged timings when vb2_is_busy()
When vb2_is_busy() it should still be possible to call S_DV_TIMINGS
provided the new timings are the same as the current timings.
For input 1 (test generator) the size is always 1080p, so just return
that.
Fixes a v4l2-compliance issue.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Benoit Parrot [Wed, 15 Jul 2015 21:00:06 +0000 (18:00 -0300)]
[media] media: am437x-vpfe: Fix a race condition during release
There was a race condition where during cleanup/release operation
on-going streaming would cause a kernel panic because the hardware
module was disabled prematurely with IRQ still pending.
Fixes: 417d2e507edc ("[media] media: platform: add VPFE capture driver support for AM437X")
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 10 Jul 2015 13:49:26 +0000 (10:49 -0300)]
[media] videobuf2: add trace events
Add videobuf2 specific vb2_qbuf and vb2_dqbuf trace events that mirror the
v4l2_qbuf and v4l2_dqbuf trace events, only they include additional
information about queue fill state and are emitted right before the buffer
is enqueued in the driver or userspace is woken up. This allows to make
sense of the timeline of trace events in combination with others that might
be triggered by __enqueue_in_driver.
Also two new trace events vb2_buf_queue and vb2_buf_done are added,
allowing to trace the handover between videobuf2 framework and driver.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 10 Jul 2015 13:49:25 +0000 (10:49 -0300)]
[media] v4l2-mem2mem: set the queue owner field just as vb2_ioctl_reqbufs does
The queue owner will be used by videobuf2 trace events to determine and
record the device minor number. It is set in v4l2_m2m_reqbufs instead of
v4l2_m2m_ioctl_reqbufs because several drivers implement their own
vidioc_reqbufs handlers that still call v4l2_m2m_reqbufs directly.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 10 Jul 2015 13:49:24 +0000 (10:49 -0300)]
[media] v4l2-dev: use event class to deduplicate v4l2 trace events
Trace events with exactly the same parameters and trace output, such as
v4l2_qbuf and v4l2_dqbuf, are supposed to use the DECLARE_EVENT_CLASS and
DEFINE_EVENT macros instead of duplicated TRACE_EVENT macro calls.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 16 Jul 2015 16:19:39 +0000 (13:19 -0300)]
[media] coda: make NV12 format default
The chroma interleaved NV12 format has higher memory bandwidth efficiency
because the chroma planes can be read/written with longer burst lengths.
Use NV12 as default format if available and consistently sort it first.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 16 Jul 2015 16:19:38 +0000 (13:19 -0300)]
[media] coda: add macroblock tiling support
Storing internal frames in macroblock tiled order improves memory
access patterns by allowing increased burst sizes when transferring
the uncompressed macroblocks to or from main memory.
The translation logic only supports a single chroma base address,
so this is only supported for the chroma interleaved NV12 format.
Since the rotator used to copy the decoder output into the v4l2
capture buffers does not seem to support the tiled format correctly,
only enable it in the encoder for now.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 16 Jul 2015 16:19:37 +0000 (13:19 -0300)]
[media] coda: move cache setup into coda9_set_frame_cache, also use it in start_encoding
The frame cache should be set up correctly to encode NV12 source frames.
This was not done before, so move the cache setup out of start_decoding
into its own function and call it from both start_encoding and
start_decoding.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 16 Jul 2015 16:13:24 +0000 (13:13 -0300)]
[media] coda: Use S_PARM to set nominal framerate for h.264 encoder
The encoder needs to know the nominal framerate for the constant bitrate
control mechanism to work. Currently the only way to set the framerate is
by using VIDIOC_S_PARM on the output queue.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 10 Jul 2015 13:37:52 +0000 (10:37 -0300)]
[media] coda: implement VBV delay and buffer size controls
The encoder allows to specify the VBV model reference decoder's initial
delay and buffer size. Export the corresponding V4L2 controls.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Fri, 10 Jul 2015 13:37:44 +0000 (10:37 -0300)]
[media] coda: reset CODA960 hardware after sequence end
On i.MX6, sometimes after decoding a stream, encoding will produce macroblock
errors caused by missing 8-byte sequences in the output stream. Until the cause
for this is found, reset the hardware after sequence end, which seems to help.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 9 Jul 2015 10:10:21 +0000 (07:10 -0300)]
[media] coda: rework meta counting and add separate lock
Keep count of number of buffer meta structures in the list and use
a separate spinlock for operations on this counted list instead
of reusing the bitstream mutex in some places and none at all in
others.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 9 Jul 2015 10:10:20 +0000 (07:10 -0300)]
[media] coda: reuse src_bufs in coda_job_ready
The v4l2_m2m_num_src_bufs_ready() function is called in multiple places
in coda_cob_ready, and there already is a variable src_bufs that is
assigned to its result. Move it to the beginning and use it everywhere.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 9 Jul 2015 10:10:19 +0000 (07:10 -0300)]
[media] coda: use event class to deduplicate v4l2 trace events
Trace events with exactly the same parameters and trace output, such as
coda_enc_pic_run and coda_enc_pic_done, are supposed to use the
DECLARE_EVENT_CLASS and DEFINE_EVENT macros instead of duplicated
TRACE_EVENT macro calls.
This patch changes the order of parameters to coda_dec_rot_done and adds
a timestamp so it can share an event class with coda_bit_queue.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 9 Jul 2015 10:10:18 +0000 (07:10 -0300)]
[media] coda: drop custom list of pixel format descriptions
Since commit
ba3002045f80 ("[media] v4l2-ioctl: fill in the description
for VIDIOC_ENUM_FMT"), all pixel formats are assigned their description
in a central place. We can now drop the custom list.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 9 Jul 2015 10:10:17 +0000 (07:10 -0300)]
[media] coda: reset stream end in stop_streaming
Otherwise a restarted stream won't queue buffers.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This page took 0.045387 seconds and 5 git commands to generate.