Nicolas Schichan [Tue, 26 Jan 2016 15:12:35 +0000 (16:12 +0100)]
net: mv643xx_eth: fix packet corruption with TSO and tiny unaligned packets.
The code in txq_put_data() would use txq->tx_curr_desc to index the
tso_hdrs/tso_hdrs_dma buffers, for less than 8 bytes unaligned
fragments, which is already moved to the next descriptor at the
beginning of the function.
If that fragment was the last of the the skb, the next skb would use
that same space to place the ip headers, overwritting that small
fragment data.
Fixes: 91986fd3d335 (net: mv643xx_eth: Ensure proper data alignment in TSO TX path)
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Reviewed-by: Philipp Kirchhofer <philipp@familie-kirchhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 26 Jan 2016 14:12:30 +0000 (15:12 +0100)]
of: of_mdio: Ensure mdio device is a PHY
of_phy_find_device() is used to find the phy device associated with a
device node. It is expected the node is for a PHY device, but in fact
it could of been probed as a generic MDIO device. Ensure the device is
a PHY before returning it.
Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.")
Reported-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 29 Jan 2016 00:05:45 +0000 (16:05 -0800)]
Merge tag 'mac80211-for-davem-2016-01-26' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Here's a first set of fixes for the 4.5-rc cycle:
* make regulatory messages much less verbose by default
* various remain-on-channel fixes
* scheduled scanning fixes with hardware restart
* a PS-Poll handling fix; was broken just recently
* bugfix to avoid buffering non-bufferable MMPDUs
* world regulatory domain data fix
* a fix for scanning causing other work to get stuck
* hwsim: revert an older problematic patch that caused some
userspace tools to have issues - not that big a deal as
it's a debug only driver though
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Weinberger [Mon, 25 Jan 2016 22:24:12 +0000 (23:24 +0100)]
net: Fix dependencies for !HAS_IOMEM archs
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Mon, 25 Jan 2016 22:01:53 +0000 (14:01 -0800)]
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
This commit fixes a corner case in tcp_mark_head_lost() which was
causing the WARN_ON(len > skb->len) in tcp_fragment() to fire.
tcp_mark_head_lost() was assuming that if a packet has
tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of
M*mss bytes, for any M < N. But with the tricky way TCP pcounts are
maintained, this is not always true.
For example, suppose the sender sends 4 1-byte packets and have the
last 3 packet sacked. It will merge the last 3 packets in the write
queue into an skb with pcount = 3 and len = 3 bytes. If another
recovery happens after a sack reneging event, tcp_mark_head_lost()
may attempt to split the skb assuming it has more than 2*MSS bytes.
This sounds very counterintuitive, but as the commit description for
the related commit
c0638c247f55 ("tcp: don't fragment SACKed skbs in
tcp_mark_head_lost()") notes, this is because tcp_shifted_skb()
coalesces adjacent regions of SACKed skbs, and when doing this it
preserves the sum of their packet counts in order to reflect the
real-world dynamics on the wire. The
c0638c247f55 commit tried to
avoid problems by not fragmenting SACKed skbs, since SACKed skbs are
where the non-proportionality between pcount and skb->len/mss is known
to be possible. However, that commit did not handle the case where
during a reneging event one of these weird SACKed skbs becomes an
un-SACKed skb, which tcp_mark_head_lost() can then try to fragment.
The fix is to simply mark the entire skb lost when this happens.
This makes the recovery slightly more aggressive in such corner
cases before we detect reordering. But once we detect reordering
this code path is by-passed because FACK is disabled.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Stringer [Fri, 22 Jan 2016 23:49:12 +0000 (15:49 -0800)]
inet: frag: Always orphan skbs inside ip_defrag()
Later parts of the stack (including fragmentation) expect that there is
never a socket attached to frag in a frag_list, however this invariant
was not enforced on all defrag paths. This could lead to the
BUG_ON(skb->sk) during ip_do_fragment(), as per the call stack at the
end of this commit message.
While the call could be added to openvswitch to fix this particular
error, the head and tail of the frags list are already orphaned
indirectly inside ip_defrag(), so it seems like the remaining fragments
should all be orphaned in all circumstances.
kernel BUG at net/ipv4/ip_output.c:586!
[...]
Call Trace:
<IRQ>
[<
ffffffffa0205270>] ? do_output.isra.29+0x1b0/0x1b0 [openvswitch]
[<
ffffffffa02167a7>] ovs_fragment+0xcc/0x214 [openvswitch]
[<
ffffffff81667830>] ? dst_discard_out+0x20/0x20
[<
ffffffff81667810>] ? dst_ifdown+0x80/0x80
[<
ffffffffa0212072>] ? find_bucket.isra.2+0x62/0x70 [openvswitch]
[<
ffffffff810e0ba5>] ? mod_timer_pending+0x65/0x210
[<
ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<
ffffffffa03205a2>] ? nf_conntrack_in+0x252/0x500 [nf_conntrack]
[<
ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<
ffffffffa02051a3>] do_output.isra.29+0xe3/0x1b0 [openvswitch]
[<
ffffffffa0206411>] do_execute_actions+0xe11/0x11f0 [openvswitch]
[<
ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<
ffffffffa0206822>] ovs_execute_actions+0x32/0xd0 [openvswitch]
[<
ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
[<
ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<
ffffffffa02068a2>] ovs_execute_actions+0xb2/0xd0 [openvswitch]
[<
ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
[<
ffffffffa0215019>] ? ovs_ct_get_labels+0x49/0x80 [openvswitch]
[<
ffffffffa0213a1d>] ovs_vport_receive+0x5d/0xa0 [openvswitch]
[<
ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<
ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<
ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<
ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
[<
ffffffffa02148fc>] internal_dev_xmit+0x6c/0x140 [openvswitch]
[<
ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
[<
ffffffff81660299>] dev_hard_start_xmit+0x2b9/0x5e0
[<
ffffffff8165fc21>] ? netif_skb_features+0xd1/0x1f0
[<
ffffffff81660f20>] __dev_queue_xmit+0x800/0x930
[<
ffffffff81660770>] ? __dev_queue_xmit+0x50/0x930
[<
ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
[<
ffffffff81669876>] ? neigh_resolve_output+0x106/0x220
[<
ffffffff81661060>] dev_queue_xmit+0x10/0x20
[<
ffffffff816698e8>] neigh_resolve_output+0x178/0x220
[<
ffffffff816a8e6f>] ? ip_finish_output2+0x1ff/0x590
[<
ffffffff816a8e6f>] ip_finish_output2+0x1ff/0x590
[<
ffffffff816a8cee>] ? ip_finish_output2+0x7e/0x590
[<
ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
[<
ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
[<
ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
[<
ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
[<
ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
[<
ffffffff816ab4c0>] ip_output+0x70/0x110
[<
ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
[<
ffffffff816aa9f9>] ip_local_out+0x39/0x70
[<
ffffffff816abf89>] ip_send_skb+0x19/0x40
[<
ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
[<
ffffffff816df21a>] icmp_push_reply+0xea/0x120
[<
ffffffff816df93d>] icmp_reply.constprop.23+0x1ed/0x230
[<
ffffffff816df9ce>] icmp_echo.part.21+0x4e/0x50
[<
ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<
ffffffff810d5f9e>] ? rcu_read_lock_held+0x5e/0x70
[<
ffffffff816dfa06>] icmp_echo+0x36/0x70
[<
ffffffff816e0d11>] icmp_rcv+0x271/0x450
[<
ffffffff816a4ca7>] ip_local_deliver_finish+0x127/0x3a0
[<
ffffffff816a4bc1>] ? ip_local_deliver_finish+0x41/0x3a0
[<
ffffffff816a5160>] ip_local_deliver+0x60/0xd0
[<
ffffffff816a4b80>] ? ip_rcv_finish+0x560/0x560
[<
ffffffff816a46fd>] ip_rcv_finish+0xdd/0x560
[<
ffffffff816a5453>] ip_rcv+0x283/0x3e0
[<
ffffffff810b6302>] ? match_held_lock+0x192/0x200
[<
ffffffff816a4620>] ? inet_del_offload+0x40/0x40
[<
ffffffff8165d062>] __netif_receive_skb_core+0x392/0xae0
[<
ffffffff8165e68e>] ? process_backlog+0x8e/0x230
[<
ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
[<
ffffffff8165d7c8>] __netif_receive_skb+0x18/0x60
[<
ffffffff8165e678>] process_backlog+0x78/0x230
[<
ffffffff8165e6dd>] ? process_backlog+0xdd/0x230
[<
ffffffff8165e355>] net_rx_action+0x155/0x400
[<
ffffffff8106b48c>] __do_softirq+0xcc/0x420
[<
ffffffff816a8e87>] ? ip_finish_output2+0x217/0x590
[<
ffffffff8178e78c>] do_softirq_own_stack+0x1c/0x30
<EOI>
[<
ffffffff8106b88e>] do_softirq+0x4e/0x60
[<
ffffffff8106b948>] __local_bh_enable_ip+0xa8/0xb0
[<
ffffffff816a8eb0>] ip_finish_output2+0x240/0x590
[<
ffffffff816a9a31>] ? ip_do_fragment+0x831/0x8a0
[<
ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
[<
ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
[<
ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
[<
ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
[<
ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
[<
ffffffff816ab4c0>] ip_output+0x70/0x110
[<
ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
[<
ffffffff816aa9f9>] ip_local_out+0x39/0x70
[<
ffffffff816abf89>] ip_send_skb+0x19/0x40
[<
ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
[<
ffffffff816d55d3>] raw_sendmsg+0x7d3/0xc30
[<
ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<
ffffffff816e7557>] ? inet_sendmsg+0xc7/0x1d0
[<
ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<
ffffffff816e759a>] inet_sendmsg+0x10a/0x1d0
[<
ffffffff816e7495>] ? inet_sendmsg+0x5/0x1d0
[<
ffffffff8163e398>] sock_sendmsg+0x38/0x50
[<
ffffffff8163ec5f>] ___sys_sendmsg+0x25f/0x270
[<
ffffffff811aadad>] ? handle_mm_fault+0x8dd/0x1320
[<
ffffffff8178c147>] ? _raw_spin_unlock+0x27/0x40
[<
ffffffff810529b2>] ? __do_page_fault+0x1e2/0x460
[<
ffffffff81204886>] ? __fget_light+0x66/0x90
[<
ffffffff8163f8e2>] __sys_sendmsg+0x42/0x80
[<
ffffffff8163f932>] SyS_sendmsg+0x12/0x20
[<
ffffffff8178cb17>] entry_SYSCALL_64_fastpath+0x12/0x6f
Code: 00 00 44 89 e0 e9 7c fb ff ff 4c 89 ff e8 e7 e7 ff ff 41 8b 9d 80 00 00 00 2b 5d d4 89 d8 c1 f8 03 0f b7 c0 e9 33 ff ff f
66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48
RIP [<
ffffffff816a9a92>] ip_do_fragment+0x892/0x8a0
RSP <
ffff88006d603170>
Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Signed-off-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 28 Jan 2016 23:59:33 +0000 (15:59 -0800)]
Merge branch 'sctp-transport-races'
Xin Long says:
====================
fix the transport dead race check by using atomic_add_unless on refcnt
sctp: fix the transport dead race check by using atomic_add_unless on
refcnt
sctp: hold transport before we access t->asoc in sctp proc
sctp: remove the dead field of sctp_transport
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Thu, 21 Jan 2016 17:49:09 +0000 (01:49 +0800)]
sctp: remove the dead field of sctp_transport
After we use refcnt to check if transport is alive, the dead can be
removed from sctp_transport.
The traversal of transport_addr_list in procfs dump is using
list_for_each_entry_rcu, no need to check if it has been freed.
sctp_generate_t3_rtx_event and sctp_generate_heartbeat_event is
protected by sock lock, it's not necessary to check dead, either.
also, the timers are cancelled when sctp_transport_free() is
called, that it doesn't wait for refcnt to reach 0 to cancel them.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Thu, 21 Jan 2016 17:49:08 +0000 (01:49 +0800)]
sctp: hold transport before we access t->asoc in sctp proc
Previously, before rhashtable, /proc assoc listing was done by
read-locking the entire hash entry and dumping all assocs at once, so we
were sure that the assoc wasn't freed because it wouldn't be possible to
remove it from the hash meanwhile.
Now we use rhashtable to list transports, and dump entries one by one.
That is, now we have to check if the assoc is still a good one, as the
transport we got may be being freed.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Thu, 21 Jan 2016 17:49:07 +0000 (01:49 +0800)]
sctp: fix the transport dead race check by using atomic_add_unless on refcnt
Now when __sctp_lookup_association is running in BH, it will try to
check if t->dead is set, but meanwhile other CPUs may be freeing this
transport and this assoc and if it happens that
__sctp_lookup_association checked t->dead a bit too early, it may think
that the association is still good while it was already freed.
So we fix this race by using atomic_add_unless in sctp_transport_hold.
After we get one transport from hashtable, we will hold it only when
this transport's refcnt is not 0, so that we can make sure t->asoc
cannot be freed before we hold the asoc again.
Note that sctp association is not freed using RCU so we can't use
atomic_add_unless() with it as it may just be too late for that either.
Fixes: 4f0087812648 ("sctp: apply rhashtable api to send/recv path")
Reported-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 28 Jan 2016 23:55:32 +0000 (15:55 -0800)]
Merge branch 'mlxsw-fixes'
Jiri Pirko says:
====================
mlxsw: driver fixes
Couple of various mlxsw driver fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:26 +0000 (15:20 +0100)]
mlxsw: reg: Use correct offset in field definiton
The rx_lane, tx_lane and module fields in the PMLP register don't have
an additional offset besides the base one (0x04), so set it to 0x00.
Fixes: 4ec14b7634b2 ("mlxsw: Add interface to access registers and process events")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:25 +0000 (15:20 +0100)]
mlxsw: spectrum: Compare local ports instead of pointers
When dumping the FDB we can't compare the actual pointers of the ports
structs, as it's possible the struct represents a vPort instead of the
underlying physical port.
Solve this by comparing the local port number instead, as it's shared
between the physical ports and all the vPorts on top of him.
Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:24 +0000 (15:20 +0100)]
mlxsw: spectrum: Dump LAG FDB records only once
LAG FDB records can only point to LAG devices or VLAN devices configured
on top of them. Therefore, when dumping the FDB we shouldn't associate
these records with the underlying physical ports.
Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:23 +0000 (15:20 +0100)]
mlxsw: spectrum: Use correct netdev when notifying bridge
LAG FDB entries pointing to VLAN devices should be reported to the
bridge with the matching VLAN device and not the underlying LAG device.
Fixes: aac78a440887 ("mlxsw: spectrum: Adjust FDB notifications for VLAN devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:22 +0000 (15:20 +0100)]
mlxsw: spectrum: Don't report VLAN for 802.1D FDB entries
When dumping the hardware FDB we should report entries pointing to VLAN
devices with VLAN 0, as packets coming into the bridge are untagged.
Likewise, pass FDB_{ADD,DEL} notifications with VLAN 0 for these
devices.
Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:21 +0000 (15:20 +0100)]
mlxsw: spectrum: Notify bridge's FDB only based on learning_sync
When we disable learning on bridge port we should still update the
software bridge's FDB when entry pointing to this bridge port is
aged-out. We can otherwise have an inconsistency between software and
hardware tables.
Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:20 +0000 (15:20 +0100)]
mlxsw: spectrum: Disable learning according to STP state
When port is put into LISTENING state it shouldn't populate the FDB, so
set the port's STP state in hardware to DISCARDING instead of LEARNING.
It will therefore keep listening to BPDU packets, but discard other
non-control packets and won't perform any learning.
Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:19 +0000 (15:20 +0100)]
mlxsw: spectrum: Don't forward packets when STP state is DISABLED
When STP state is set to DISABLED the port is assumed to be inactive, but
currently we forward packets ingressing through it.
Instead, set the port's STP state in hardware to DISCARDING, which means
it doesn't forward packets or perform any learning, but it does trap
control packets. However, these packets will be dropped by bridge code,
which results in the expected behavior.
Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:18 +0000 (15:20 +0100)]
mlxsw: spectrum: Flush FDB when leaving bridge
As explained in previous commit, we should always take care of flushing
the FDB in the driver and not rely on bridge code.
We need to distinguish between two cases with regards to LAG:
1) Port is leaving LAG while LAG is bridged (or VLAN devices on top of
it). In this case don't flush the FDB entries pointing to the LAG ID, as
this will affect other ports still member in the LAG. Only flush the FDB
when the last port in the LAG is leaving the bridge.
2) LAG device is leaving the bridge. In this case the CHANGEUPPER event
is simply propagated to each member port, so make each port flush the
FDB in its turn.
Note that emptying a bridged LAG from ports creates an inconsistency
between hardware and software. A user who later (< ageing_time)
re-populates the LAG won't have any FDB entries pointing to the LAG ID
in hardware, but they will be present in the software bridge's FDB.
Currently there is no good solution to this problem, but this will be
addressed by us in the future.
In order to optimize the flushing process, flush by port or LAG ID if
there are no VLAN interfaces on top of the port. Otherwise, flush using
(Port / LAG ID, FID=VID} for each of the lower 4K FIDs. In the case of
VLAN device simply flush using {Port / LAG ID, vFID} with the vFID to
which the VLAN device is mapped to.
Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:17 +0000 (15:20 +0100)]
mlxsw: reg: Add the Switch Filtering DB Flush register
When removing a net device from a bridge we should flush the FDB entries
associated with this net device. Up until now, we relied upon bridge
code to do that for us, but it is possible for user to prevent hardware
from syncing with the software bridge (learning_sync=0), so we need to
flush overselves.
Add the Switch Filtering DB Flush (SFDF) register that is used to flush
FDB entries according to different parameters (per-port, per-FID etc).
Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 27 Jan 2016 14:20:16 +0000 (15:20 +0100)]
mlxsw: spectrum: Handle port leaving LAG while bridged
It is possible for a user to remove a port from a LAG device, while the
LAG device or VLAN devices on top of it are bridged. In these cases,
bridge's teardown sequence is never issued, so we need to take care of
it ourselves.
When LAG's unlinking event is received by port netdev:
1) Traverse its vPorts list and make those member in a bridge leave it.
They will be deleted later by LAG code.
2) Make the port netdev itself leave its bridge if member in one.
Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Tue, 26 Jan 2016 10:29:03 +0000 (11:29 +0100)]
rfkill: fix rfkill_fop_read wait_event usage
The code within wait_event_interruptible() is called with
!TASK_RUNNING, so mustn't call any functions that can sleep,
like mutex_lock().
Since we re-check the list_empty() in a loop after the wait,
it's safe to simply use list_empty() without locking.
This bug has existed forever, but was only discovered now
because all userspace implementations, including the default
'rfkill' tool, use poll() or select() to get a readable fd
before attempting to read.
Cc: stable@vger.kernel.org
Fixes: c64fb01627e24 ("rfkill: create useful userspace interface")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sachin Kulkarni [Tue, 12 Jan 2016 09:00:19 +0000 (14:30 +0530)]
mac80211: Requeue work after scan complete for all VIF types.
During a sw scan ieee80211_iface_work ignores work items for all vifs.
However after the scan complete work is requeued only for STA, ADHOC
and MESH iftypes.
This occasionally results in event processing getting delayed/not
processed for iftype AP when it coexists with a STA. This can result
in data halt and eventually disconnection on the AP interface.
Cc: stable@vger.kernel.org
Signed-off-by: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
David S. Miller [Tue, 26 Jan 2016 06:51:42 +0000 (22:51 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2016-01-25
This series contains updates to i40e only and so I won't continue receiving
patches to fix the same issue (again).
Arnd fixes the driver from causing the compiler whining about uninitialized
variables, so initialize those variables.
Eric fixes the build errors/warnings which were introduced by Anjali
when she added geneve support to i40e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 21 Jan 2016 03:53:17 +0000 (19:53 -0800)]
net: i40e: shut up uninitialized variable warnings
intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring':
intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized]
intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared here
intel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized]
intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Eric Dumazet [Thu, 21 Jan 2016 03:53:02 +0000 (19:53 -0800)]
i40e: fix build warnings
Fixes following build warnings :
drivers/net/ethernet/intel/i40e/i40e_main.c:7057:13: warning:
'i40e_sync_udp_filters_subtask' defined but not used [-Wunused-function]
drivers/net/ethernet/intel/i40e/i40e_main.c:8524:13: warning:
'i40e_add_vxlan_port' defined but not used [-Wunused-function]
drivers/net/ethernet/intel/i40e/i40e_main.c:8569:13: warning:
'i40e_del_vxlan_port' defined but not used [-Wunused-function]
drivers/net/ethernet/intel/i40e/i40e_main.c:8604:13: warning:
'i40e_add_geneve_port' defined but not used [-Wunused-function]
drivers/net/ethernet/intel/i40e/i40e_main.c:8651:13: warning:
'i40e_del_geneve_port' defined but not used [-Wunused-function]
Fixes: 6a899024058d ("i40e: geneve tunnel offload support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Haiyang Zhang [Mon, 25 Jan 2016 17:49:31 +0000 (09:49 -0800)]
hv_netvsc: Fix book keeping of skb during batching process
Since eliminating send_completion_tid from struct hv_netvsc_packet, we
haven't add proper book keeping for the skb of the batched packet. This
patch fixes this issue and allows the previous skb is properly freed.
Otherwise, a panic may happen.
Thanks to Simon Xiao <sixiao@microsoft.com> for bisecting and analysis.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Mon, 25 Jan 2016 15:00:41 +0000 (16:00 +0100)]
hv_netvsc: use skb_get_hash() instead of a homegrown implementation
Recent changes to 'struct flow_keys' (e.g commit
d34af823ff40 ("net: Add
VLAN ID to flow_keys")) introduced a performance regression in netvsc
driver. Is problem is, however, not the above mentioned commit but the
fact that netvsc_set_hash() function did some assumptions on the struct
flow_keys data layout and this is wrong.
Get rid of netvsc_set_hash() by switching to skb_get_hash(). This change
will also imply switching to Jenkins hash from the currently used Toeplitz
but it seems there is no good excuse for Toeplitz to stay.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thadeu Lima de Souza Cascardo [Mon, 25 Jan 2016 13:29:19 +0000 (11:29 -0200)]
sit: set rtnl_link_ops before calling register_netdevice
When creating a SIT tunnel with ip tunnel, rtnl_link_ops is not set before
ipip6_tunnel_create is called. When register_netdevice is called, there is
no linkinfo attribute in the NEWLINK message because of that.
Setting rtnl_link_ops before calling register_netdevice fixes that.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Mon, 25 Jan 2016 10:40:50 +0000 (11:40 +0100)]
net: fec: use CONFIG_ARM instead of CONFIG_ARCH_MXC/SOC_IMX28
As Arnd Bergmann points out, using CONFIG_ARCH_MXC and/or SOC_IMX28
is wrong if some other ARM platform uses this device - the operation
of the driver would depend on an unrelated ARM platform that might
or might not be set for multi-platform kernels.
Prior to my previous patch, any other platforms using it would have
been broken already due to having the cbd_datlen/cbd_sc fields in
the wrong order, but byte ordering correctly, so no such platforms
can exist and work today.
In any case, it seems likely that only Freescale SoCs use this part,
and those are little-endian on ARM, so CONFIG_ARM is safe for them.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudip Mukherjee [Mon, 25 Jan 2016 07:35:20 +0000 (13:05 +0530)]
defxx: fix build warning
We are getting many build warnings about:
'bar_start' may be used uninitialized
and
'bar_len' may be used uninitialized
They are not actually uninitialized as dfx_get_bars() will initialize
them properly. But still lets have them initialized just to satisfy the
compiler (gcc 4.8.2).
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudip Mukherjee [Mon, 25 Jan 2016 06:13:09 +0000 (11:43 +0530)]
net: macb: fix build warning
We are getting build warning about:
macb.c:2889:13: warning: 'tx_clk' may be used uninitialized in this function
macb.c:2888:11: warning: 'hclk' may be used uninitialized in this function
In reality they are not used uninitialized as clk_init() will initialize
them, this patch will just silence the warning.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Sun, 24 Jan 2016 15:52:37 +0000 (16:52 +0100)]
net: fec: make driver endian-safe
The driver treats the device descriptors as CPU-endian, which appears
to be correct with the default endianness on both ARM (typically LE)
and PowerPC (typically BE) SoCs, indicating that the hardware block
is generated differently. Add endianness annotations and byteswaps as
necessary.
It's not clear that the ifdef there really is correct and shouldn't
just be #ifdef CONFIG_ARM, but I also can't test on anything but the
i.MX6 HummingBoard where this gets it working with a BE kernel.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Sun, 24 Jan 2016 09:22:05 +0000 (09:22 +0000)]
net: dsa: fix mv88e6xxx switches
Since commit
76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del
ops"), the Marvell 88E6xxx switch has been unable to pass traffic
between ports - any received traffic is discarded by the switch.
Taking a port out of bridge mode and configuring a vlan on it also the
port to start passing traffic.
With the debugfs files re-instated to allow debug of this issue by
comparing the register settings between the working and non-working
case, the reason becomes clear:
GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6
- 7: 1111 707f 2001 2 2 2 2 2 0 2
+ 7: 1111 707f 2001 1 1 1 1 1 0 1
Register 7 for the ports is the default vlan tag register, and in the
non-working setup, it has been set to 2, despite vlan 2 not being
configured. This causes the switch to drop all packets coming in to
these ports. The working setup has the default vlan tag register set
to 1, which is the default vlan when none is configured.
Inspection of the code reveals why. The code prior to this commit
was:
- for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
...
- if (!err && vlan->flags & BRIDGE_VLAN_INFO_PVID)
- err = ds->drv->port_pvid_set(ds, p->port, vid);
but the new code is:
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
...
+ }
...
+ if (pvid)
+ err = _mv88e6xxx_port_pvid_set(ds, port, vid);
This causes the new code to always set the default vlan to one higher
than the old code.
Fix this.
Fixes: 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Roth [Sat, 23 Jan 2016 22:56:19 +0000 (00:56 +0200)]
82xx: FCC: Fixing a bug causing to FCC port lock-up (second try)
This is an additional patch to the one already submitted recently.
The previous patch was not complete, and the FCC port lock-up scenario
has been reproduced in lab.
I had an opportunity to check the current patch in lab and the FCC
port lock no longer freezes, while the previous patch still locks-up the
FCC port.
The current patch fixes a pointer arithmetic bug (second bug in the same
line), which leads FCC port lock-up during underrun/collision handling.
Within the tx_startup() function in mac-fcc.c, the address of last BD is
not calculated correctly. As a result of wrong calculation of the last BD
address, the next transmitted BD may be set to an area out of the transmit
BD ring. This actually causes to port lock-up and it is not recoverable.
Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Egerer [Mon, 25 Jan 2016 11:58:44 +0000 (12:58 +0100)]
ipv4+ipv6: Make INET*_ESP select CRYPTO_ECHAINIV
The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have
to select CRYPTO_ECHAINIV in order to work properly. This solves the
issues caused by a misconfiguration as described in [1].
The original approach, patching crypto/Kconfig was turned down by
Herbert Xu [2].
[1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html
[2] http://marc.info/?l=linux-crypto-vger&m=
145224655809562&w=2
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Fri, 22 Jan 2016 20:29:49 +0000 (18:29 -0200)]
sctp: allow setting SCTP_SACK_IMMEDIATELY by the application
This patch extends commit
b93d6471748d ("sctp: implement the sender side
for SACK-IMMEDIATELY extension") as it didn't white list
SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be
understood as an invalid flag and returning -EINVAL to the application.
Note that the actual handling of the flag is already there in
sctp_datamsg_from_user().
https://tools.ietf.org/html/rfc7053#section-7
Fixes: b93d6471748d ("sctp: implement the sender side for SACK-IMMEDIATELY extension")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Fri, 22 Jan 2016 10:43:44 +0000 (11:43 +0100)]
net: simplify napi_synchronize() to avoid warnings
The napi_synchronize() function is defined twice: The definition
for SMP builds waits for other CPUs to be done, while the uniprocessor
variant just contains a barrier and ignores its argument.
In the mvneta driver, this leads to a warning about an unused variable
when we lookup the NAPI struct of another CPU and then don't use it:
ethernet/marvell/mvneta.c: In function 'mvneta_percpu_notifier':
ethernet/marvell/mvneta.c:2910:30: error: unused variable 'other_port' [-Werror=unused-variable]
There are no other CPUs on a UP build, so that code never runs, but
gcc does not know this.
The nicest solution seems to be to turn the napi_synchronize() helper
into an inline function for the UP case as well, as that leads gcc to
not complain about the argument being unused. Once we do that, we can
also combine the two cases into a single function definition and use
if(IS_ENABLED()) rather than #ifdef to make it look a bit nicer.
The warning first came up in linux-4.4, but I failed to catch it
earlier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f86428854480 ("net: mvneta: Statically assign queues to CPUs")
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Fri, 22 Jan 2016 00:39:43 +0000 (01:39 +0100)]
pptp: fix illegal memory access caused by multiple bind()s
Several times already this has been reported as kasan reports caused by
syzkaller and trinity and people always looked at RCU races, but it is
much more simple. :)
In case we bind a pptp socket multiple times, we simply add it to
the callid_sock list but don't remove the old binding. Thus the old
socket stays in the bucket with unused call_id indexes and doesn't get
cleaned up. This causes various forms of kasan reports which were hard
to pinpoint.
Simply don't allow multiple binds and correct error handling in
pptp_bind. Also keep sk_state bits in place in pptp_connect.
Fixes: 00959ade36acad ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Cc: Dmitry Kozlov <xeb@mail.ru>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Fri, 22 Jan 2016 00:07:41 +0000 (16:07 -0800)]
drivers: net: xgene: fix extra IRQ issue
For interrupt controller that doesn't support irq_disable and hardware
with level interrupt, an extra interrupt may be pending. This patch fixes
the issue by setting IRQ_DISABLE_UNLAZY flag for the interrupt line,
as suggested by,
'commit
e9849777d0e2 ("genirq: Add flag to force mask in
disable_irq[_nosync]()")'
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Toan Le <toanle@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 24 Jan 2016 21:53:50 +0000 (13:53 -0800)]
af_unix: fix struct pid memory leak
Dmitry reported a struct pid leak detected by a syzkaller program.
Bug happens in unix_stream_recvmsg() when we break the loop when a
signal is pending, without properly releasing scm.
Fixes: b3ca9b02b007 ("net: fix multithreaded signal handling in unix recv routines")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Weiner [Thu, 21 Jan 2016 20:56:28 +0000 (15:56 -0500)]
net: sock: remove dead cgroup methods from struct proto
The cgroup methods are no longer used after
baac50bbc3cd ("net:
tcp_memcontrol: simplify linkage between socket and page counter").
The hunk to delete them was included in the original patch but must
have gotten lost during conflict resolution on the way upstream.
Fixes: baac50bbc3cd ("net: tcp_memcontrol: simplify linkage between socket and page counter")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Teresa Remmet [Wed, 20 Jan 2016 12:40:35 +0000 (13:40 +0100)]
net: phy: smsc: Fix disabling energy detect mode
When the lan87xx_read_status function is getting called the
energy detect mode is enabled again even if it has been
disabled by device tree.
Added private struct to check the energy detect status.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 21 Jan 2016 20:04:59 +0000 (12:04 -0800)]
Merge branch 'mvneta-multi-clk'
Jisheng Zhang says:
====================
net: mvneta: support more than one clk
Some platforms may provide more than one clk for the mvneta IP, for
example Marvell BG4CT provides "core" clk for the mac core, and "axi"
clk for the AXI bus logic.
This series tries to addess the "more than one clk" issue. Note: to
support BG4CT, we have lots of refactor work to do, eg. BG4CT doesn't
have mbus concept etc.
Since v2:
- Name the optional clock as "bus", which is a bit more flexible.
Since v1:
- Add Thomas Acks to patch1 and patch2.
- make sure the headers are really sorted (some headers are still
unsorted in v1).
- disable axi clk before disabling core clk, Thank Thomas.
- update dt binding as Thomas suggested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jisheng Zhang [Wed, 20 Jan 2016 11:27:25 +0000 (19:27 +0800)]
net: mvneta: update clocks property and document additional clock-names
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jisheng Zhang [Wed, 20 Jan 2016 11:27:24 +0000 (19:27 +0800)]
net: mvneta: get optional bus clk
Some platforms may provide more than one clk for the mvneta IP, for
example Marvell BG4CT provides one clk for the mac core, and one
clk for the AXI bus logic. Obviously this bus clk also need to
be enabled. This patch adds this optional "bus" clk support.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jisheng Zhang [Wed, 20 Jan 2016 11:27:23 +0000 (19:27 +0800)]
net: mvneta: Try to get named core clock first
Some platforms may provide more than one clk for the mvneta IP, for
example Marvell BG4CT provides one clk for the mac core, and one
clk for the AXI bus logic.
To support for more than one clock, we'll need to distinguish between
the clock by name. Change clock probing to first try to get "core"
clock before falling back to unnamed clock.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jisheng Zhang [Wed, 20 Jan 2016 11:27:22 +0000 (19:27 +0800)]
net: mvneta: sort the headers in alphabetic order
Sorting the headers in alphabetic order will help to reduce the conflict
when adding new headers in the future.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jisheng Zhang [Wed, 20 Jan 2016 08:36:25 +0000 (16:36 +0800)]
net: mvneta: fix trivial cut-off issue in mvneta_ethtool_update_stats
When s->type is T_REG_64, the high 32bits are lost in val. This patch
fixes this trivial issue.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Fixes: 9b0cdefa4cd5 ("net: mvneta: add ethtool statistics")
Signed-off-by: David S. Miller <davem@davemloft.net>
yankejian [Wed, 20 Jan 2016 08:00:19 +0000 (16:00 +0800)]
net: hns: enet specifies a reference to dsaf
This patch replace the assoication between dsaf and enet from string
matching to object reference. It requires the DTS to be updated within
BIOS. Thanks god it can be done for all released boards.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 21 Jan 2016 16:02:54 +0000 (08:02 -0800)]
tcp: fix NULL deref in tcp_v4_send_ack()
Neal reported crashes with this stack trace :
RIP: 0010:[<
ffffffff8c57231b>] tcp_v4_send_ack+0x41/0x20f
...
CR2:
0000000000000018 CR3:
000000044005c000 CR4:
00000000001427e0
...
[<
ffffffff8c57258e>] tcp_v4_reqsk_send_ack+0xa5/0xb4
[<
ffffffff8c1a7caa>] tcp_check_req+0x2ea/0x3e0
[<
ffffffff8c19e420>] tcp_rcv_state_process+0x850/0x2500
[<
ffffffff8c1a6d21>] tcp_v4_do_rcv+0x141/0x330
[<
ffffffff8c56cdb2>] sk_backlog_rcv+0x21/0x30
[<
ffffffff8c098bbd>] tcp_recvmsg+0x75d/0xf90
[<
ffffffff8c0a8700>] inet_recvmsg+0x80/0xa0
[<
ffffffff8c17623e>] sock_aio_read+0xee/0x110
[<
ffffffff8c066fcf>] do_sync_read+0x6f/0xa0
[<
ffffffff8c0673a1>] SyS_read+0x1e1/0x290
[<
ffffffff8c5ca262>] system_call_fastpath+0x16/0x1b
The problem here is the skb we provide to tcp_v4_send_ack() had to
be parked in the backlog of a new TCP fastopen child because this child
was owned by the user at the time an out of window packet arrived.
Before queuing a packet, TCP has to set skb->dev to NULL as the device
could disappear before packet is removed from the queue.
Fix this issue by using the net pointer provided by the socket (being a
timewait or a request socket).
IPv6 is immune to the bug : tcp_v6_send_response() already gets the net
pointer from the socket if provided.
Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jerry Chu <hkchu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Gross [Thu, 21 Jan 2016 00:22:47 +0000 (16:22 -0800)]
tunnels: Allow IPv6 UDP checksums to be correctly controlled.
When configuring checksums on UDP tunnels, the flags are different
for IPv4 vs. IPv6 (and reversed). However, when lightweight tunnels
are enabled the flags used are always the IPv4 versions, which are
ignored in the IPv6 code paths. This uses the correct IPv6 flags, so
checksums can be controlled appropriately.
Fixes: a725e514 ("vxlan: metadata based tunneling for IPv6")
Fixes: abe492b4 ("geneve: UDP checksum configuration via netlink")
Signed-off-by: Jesse Gross <jesse@kernel.org>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 21 Jan 2016 18:48:51 +0000 (10:48 -0800)]
Merge branch 'fix-phy-ignore-interrupts'
Florian Fainelli says:
====================
net: phy: Finally fix PHY_IGNORE_INTERRUPTS
This patch series finally fixes how PHY_IGNORE_INTERRUPTS are treated by
avoiding to poll the PHY *and* getting notified from link state changes by the
Ethernet MAC interrupt service routine.
Tested with bcmgenet since this is the HW that I have access to.
Targetting the "net" tree since these are bugfixes, but I would like Woojun and
Andrew to take a look and test that on their respective HW setups as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 19 Jan 2016 03:33:08 +0000 (19:33 -0800)]
net: bcmgenet: Properly configure PHY to ignore interrupt
By the time we execute bcmgenet_mii_probe(), the MDIO bus structure has
long been allocated and registered. Overirring the PHY interrupt using
the MDIO bus structure has no chance to work anymore, because
of_mdiobus_register() has call phy_device_create() for use, which copied
the MDIO bus address's irq for the PHY into the PHY device "irq" member.
Since we do have a proper reference to a PHY device in
bcmgenet_mii_probe(), just assign the desired IRQ value here.
Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 19 Jan 2016 03:33:07 +0000 (19:33 -0800)]
net: phy: Fix phy_mac_interrupt()
Commit
5ea94e7686a3 ("phy: add phy_mac_interrupt()") to use with
PHY_IGNORE_INTERRUPT added a cancel_work_sync() into phy_mac_interrupt()
which is allowed to sleep, whereas phy_mac_interrupt() is expected to be
callable from interrupt context.
Now that we have fixed how the PHY state machine treats
PHY_IGNORE_INTERRUPT with respect to state changes, we can just set the
new link state, and queue the PHY state machine for execution so it is
going to read the new link state.
For that to work properly, we need to update phy_change() not to try to
invoke any interrupt callbacks if we have configured the PHY device for
PHY_IGNORE_INTERRUPT, because that PHY device and its driver are not
required to implement those.
Fixes: 5ea94e7686a3 ("phy: add phy_mac_interrupt() to use with PHY_IGNORE_INTERRUPT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 19 Jan 2016 03:33:06 +0000 (19:33 -0800)]
net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS
Commit
2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT") changed
a hunk in phy_state_machine() in the PHY_RUNNING case which was not
needed. The change essentially makes the PHY library treat PHY devices
with PHY_IGNORE_INTERRUPT to keep polling for the PHY device, even
though the intent is not to do it.
Fix this by reverting that specific hunk, which makes the PHY state
machine wait for state changes, and stay in the PHY_RUNNING state for as
long as needed.
Fixes: 2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudip Mukherjee [Thu, 21 Jan 2016 05:12:31 +0000 (10:42 +0530)]
net/irda: bfin_sir: remove duplicate defines
The defconfig build of blackfin is failing with the error:
arch/blackfin/include/asm/bfin_serial.h:269:0: warning: "port_membase" redefined
drivers/net/irda/bfin_sir.h:85:0: note: this is the location of the previous definition
arch/blackfin/include/asm/bfin_serial.h:382:0: warning: "get_lsr_cache" redefined
drivers/net/irda/bfin_sir.h:86:0: note: this is the location of the previous definition
arch/blackfin/include/asm/bfin_serial.h:383:0: warning: "put_lsr_cache" redefined
drivers/net/irda/bfin_sir.h:87:0: note: this is the location of the previous definition
port_membase, get_lsr_cache, put_lsr_cache are already defined in the
architecture files, no need to define them again in the driver.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 21 Jan 2016 02:56:44 +0000 (18:56 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Xin Long [Wed, 20 Jan 2016 08:12:33 +0000 (16:12 +0800)]
net: change tcp_syn_retries documentation
Documentation should be kept consistent with the code:
static int tcp_syn_retries_max = MAX_TCP_SYNCNT;
#define MAX_TCP_SYNCNT 127
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manfred Rudigier [Wed, 20 Jan 2016 10:22:28 +0000 (11:22 +0100)]
net: dp83640: Fix tx timestamp overflow handling.
PHY status frames are not reliable, the PHY may not be able to send them
during heavy receive traffic. This overflow condition is signaled by the
PHY in the next status frame, but the driver did not make use of it.
Instead it always reported wrong tx timestamps to user space after an
overflow happened because it assigned newly received tx timestamps to old
packets in the queue.
This commit fixes this issue by clearing the tx timestamp queue every time
an overflow happens, so that no timestamps are delivered for overflow
packets. This way time stamping will continue correctly after an overflow.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 21 Jan 2016 00:25:01 +0000 (16:25 -0800)]
net: diag: support v4mapped sockets in inet_diag_find_one_icsk()
Lorenzo reported that we could not properly find v4mapped sockets
in inet_diag_find_one_icsk(). This patch fixes the issue.
Reported-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Gross [Thu, 21 Jan 2016 01:59:49 +0000 (17:59 -0800)]
gro: Make GRO aware of lightweight tunnels.
GRO is currently not aware of tunnel metadata generated by lightweight
tunnels and stored in the dst. This leads to two possible problems:
* Incorrectly merging two frames that have different metadata.
* Leaking of allocated metadata from merged frames.
This avoids those problems by comparing the tunnel information before
merging, similar to how we handle other metadata (such as vlan tags),
and releasing any state when we are done.
Reported-by: John <john.phillips5@hpe.com>
Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.")
Signed-off-by: Jesse Gross <jesse@kernel.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Levin [Tue, 19 Jan 2016 00:23:51 +0000 (19:23 -0500)]
netfilter: nf_conntrack: use safer way to lock all buckets
When we need to lock all buckets in the connection hashtable we'd attempt to
lock 1024 spinlocks, which is way more preemption levels than supported by
the kernel. Furthermore, this behavior was hidden by checking if lockdep is
enabled, and if it was - use only 8 buckets(!).
Fix this by using a global lock and synchronize all buckets on it when we
need to lock them all. This is pretty heavyweight, but is only done when we
need to resize the hashtable, and that doesn't happen often enough (or at all).
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sowmini Varadhan [Mon, 18 Jan 2016 21:12:09 +0000 (16:12 -0500)]
sunvnet: Initialize network_header and transport_header in vnet_rx_one()
vnet_fullcsum() accesses ip_hdr() and transport header to compute
the checksum for IPv4 packets, so these need to be initialized in
skb created in vnet_rx_one().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Craig Gallek [Tue, 19 Jan 2016 19:27:08 +0000 (14:27 -0500)]
soreuseport: fix NULL ptr dereference SO_REUSEPORT after bind
Marc Dionne discovered a NULL pointer dereference when setting
SO_REUSEPORT on a socket after it is bound.
This patch removes the assumption that at least one socket in the
reuseport group is bound with the SO_REUSEPORT option before other
bind calls occur.
Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Tue, 19 Jan 2016 09:41:33 +0000 (10:41 +0100)]
af_iucv: Validate socket address length in iucv_sock_bind()
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Evgeny Cherkashin <Eugene.Crosser@ru.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 19 Jan 2016 16:36:43 +0000 (08:36 -0800)]
udp: fix potential infinite loop in SO_REUSEPORT logic
Using a combination of connected and un-connected sockets, Dmitry
was able to trigger soft lockups with his fuzzer.
The problem is that sockets in the SO_REUSEPORT array might have
different scores.
Right after sk2=socket(), setsockopt(sk2,...,SO_REUSEPORT, on) and
bind(sk2, ...), but _before_ the connect(sk2) is done, sk2 is added into
the soreuseport array, with a score which is smaller than the score of
first socket sk1 found in hash table (I am speaking of the regular UDP
hash table), if sk1 had the connect() done, giving a +8 to its score.
hash bucket [X] -> sk1 -> sk2 -> NULL
sk1 score = 14 (because it did a connect())
sk2 score = 6
SO_REUSEPORT fast selection is an optimization. If it turns out the
score of the selected socket does not match score of first socket, just
fallback to old SO_REUSEPORT logic instead of trying to be too smart.
Normal SO_REUSEPORT users do not mix different kind of sockets, as this
mechanism is used for load balance traffic.
Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Craig Gallek <kraigatgoog@gmail.com>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 19 Jan 2016 00:44:24 +0000 (16:44 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio barrier rework+fixes from Michael Tsirkin:
"This adds a new kind of barrier, and reworks virtio and xen to use it.
Plus some fixes here and there"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (44 commits)
checkpatch: add virt barriers
checkpatch: check for __smp outside barrier.h
checkpatch.pl: add missing memory barriers
virtio: make find_vqs() checkpatch.pl-friendly
virtio_balloon: fix race between migration and ballooning
virtio_balloon: fix race by fill and leak
s390: more efficient smp barriers
s390: use generic memory barriers
xen/events: use virt_xxx barriers
xen/io: use virt_xxx barriers
xenbus: use virt_xxx barriers
virtio_ring: use virt_store_mb
sh: move xchg_cmpxchg to a header by itself
sh: support 1 and 2 byte xchg
virtio_ring: update weak barriers to use virt_xxx
Revert "virtio_ring: Update weak barriers to use dma_wmb/rmb"
asm-generic: implement virt_xxx memory barriers
x86: define __smp_xxx
xtensa: define __smp_xxx
tile: define __smp_xxx
...
Linus Torvalds [Mon, 18 Jan 2016 20:57:18 +0000 (12:57 -0800)]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile updates from Chris Metcalf:
"This is a grab bag of changes that includes some NOHZ and
context-tracking related changes, some debugging improvements,
JUMP_LABEL support, and some fixes for tilepro allmodconfig support.
We also remove the now-unused node_has_online_mem() definitions both
for tile's asm/topology.h as well as in linux/topology.h itself"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
numa: remove stale node_has_online_mem() define
arch/tile: move user_exit() to early kernel entry sequence
tile: fix bug in setting PT_FLAGS_DISABLE_IRQ on kernel entry
tile: fix tilepro casts for readl, writel, etc
tile: fix a -Wframe-larger-than warning
tile: include the syscall number in the backtrace
MAINTAINERS: add git URL for tile
arch/tile: adopt prepare_exit_to_usermode() model from x86
tile/jump_label: add jump label support for TILE-Gx
tile: define a macro ktext_writable_addr to get writable kernel text address
Linus Torvalds [Mon, 18 Jan 2016 20:50:55 +0000 (12:50 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/egtvedt/linux-avr32
Pull AVR32 updates from Hans-Christian Noren Egtvedt.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
mmc: atmel: get rid of struct mci_dma_data
mmc: atmel-mci: restore dma on AVR32
avr32: wire up missing syscalls
avr32: wire up accept4 syscall
Linus Torvalds [Mon, 18 Jan 2016 20:44:40 +0000 (12:44 -0800)]
Merge branch 'for-linus-4.5' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
"This has our usual assortment of fixes and cleanups, but the biggest
change included is Omar Sandoval's free space tree. It's not the
default yet, mounting -o space_cache=v2 enables it and sets a readonly
compat bit. The tree can actually be deleted and regenerated if there
are any problems, but it has held up really well in testing so far.
For very large filesystems (30T+) our existing free space caching code
can end up taking a huge amount of time during commits. The new tree
based code is faster and less work overall to update as the commit
progresses.
Omar worked on this during the summer and we'll hammer on it in
production here at FB over the next few months"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (73 commits)
Btrfs: fix fitrim discarding device area reserved for boot loader's use
Btrfs: Check metadata redundancy on balance
btrfs: statfs: report zero available if metadata are exhausted
btrfs: preallocate path for snapshot creation at ioctl time
btrfs: allocate root item at snapshot ioctl time
btrfs: do an allocation earlier during snapshot creation
btrfs: use smaller type for btrfs_path locks
btrfs: use smaller type for btrfs_path lowest_level
btrfs: use smaller type for btrfs_path reada
btrfs: cleanup, use enum values for btrfs_path reada
btrfs: constify static arrays
btrfs: constify remaining structs with function pointers
btrfs tests: replace whole ops structure for free space tests
btrfs: use list_for_each_entry* in backref.c
btrfs: use list_for_each_entry_safe in free-space-cache.c
btrfs: use list_for_each_entry* in check-integrity.c
Btrfs: use linux/sizes.h to represent constants
btrfs: cleanup, remove stray return statements
btrfs: zero out delayed node upon allocation
btrfs: pass proper enum type to start_transaction()
...
Linus Torvalds [Mon, 18 Jan 2016 20:35:14 +0000 (12:35 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull more networking fixes from David Miller:
1) Fix brcmfmac build with older gcc, from Arend van Spriel.
2) IRQ values unintentionally truncated to u8 in mlx5 driver, from
Doron Tsur.
3) Fix build warnings wrt tcp cgroup changes, from Geert Uytterhoeven.
4) Limit deep recursion in ovs stack, from Hannes Frederic Sowa.
5) at803x phy driver bug fixes from, Martin Blumenstingl.
6) Fix TSO handling in hns driver, from Daode Huang
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
ovs: limit ovs recursions in ovs_execute_actions to not corrupt stack
team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid
net: hns: bug fix about hisilicon TSO BD mode
brcmfmac: fix BRCMF_FW_NVRAM_DEF macro for older gcc compilers
net: phy: at803x: Add the interrupt register bit definitions
net: phy: at803x: Clean up duplicate register definitions
net: phy: at803x: Allow specifying the RGMII RX clock delay via phy mode
net: phy: at803x: Don't set gbit features for the AR8030 phy
arm64: bpf: add extra pass to handle faulty codegen
arm64: insn: remove BUG_ON from codegen
sctp: the temp asoc's transports should not be hashed/unhashed
net/mlx5_core: Fix trimming down IRQ number
tcp_memcontrol: Forward declare cgroup_subsys and mem_cgroup stucts
batman-adv: Drop immediate orig_node free function
batman-adv: Drop immediate batadv_hard_iface free function
batman-adv: Drop immediate neigh_ifinfo free function
batman-adv: Drop immediate batadv_hardif_neigh_node free function
batman-adv: Drop immediate batadv_neigh_node free function
batman-adv: Drop immediate batadv_orig_ifinfo free function
batman-adv: Avoid recursive call_rcu for batadv_nc_node
...
Linus Torvalds [Mon, 18 Jan 2016 20:28:57 +0000 (12:28 -0800)]
Merge git://git./linux/kernel/git/davem/ide
Pull IDE updates from David Miller:
"Just a few small changes this merge window, marking ops const, printf
string type fixes, etc"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
drivers/ide: make ide-scan-pci.c driver explicitly non-modular
ide: constify ide_dma_ops structures
ide: silence some underflow warnings
Linus Torvalds [Mon, 18 Jan 2016 20:10:45 +0000 (12:10 -0800)]
Merge tag 'rtc-4.5' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Core:
- fix module reference count in rtc-proc
- Replace simple_strtoul by kstrtoul
New driver:
- Epson RX8010SJ
Subsystem wide cleanups:
- use %ph for short hex dumps
- constify *_chip_ops structures
Drivers:
- abx80x: Microcrystal rv1805 support, alarm support
- cmos: prevent kernel warning on IRQ flags mismatch
- s5m: various cleanups
- rv8803: rx8900 compatibility, small error path fix
- sunxi: various cleanups
- lpc32xx: remove irq > NR_IRQS check from probe()
- imxdi: fix spelling mistake in warning message
- ds1685: don't try to micromanage sysfs output size
- da9063: avoid writing undefined data to rtc
- gemini: Remove unnecessary platform_set_drvdata()
- efi: add efi_procfs in efi_rtc_ops
- pcf8523: refuse to write dates later than 2099"
* tag 'rtc-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (24 commits)
rtc: cmos: prevent kernel warning on IRQ flags mismatch
rtc: rtc-ds2404: constify ds2404_chip_ops structures
rtc: s5m: Make register configuration per S2MPS device to remove exceptions
rtc: s5m: Add separate field for storing auto-cleared mask in register config
rtc: s5m: Cleanup by removing useless 'rtc' prefix from fields
rtc: Replace simple_strtoul by kstrtoul
rtc: abx80x: add alarm support
rtc: abx80x: Add Microcrystal rv1805 support
rtc: v3020: constify v3020_chip_ops structures
rtc: rv8803: Extend compatibility with the rx8900
rtc: rv8803: fix handling return value of i2c_smbus_read_byte_data
rtc: Add Epson RX8010SJ RTC driver
rtc: lpc32xx: remove irq > NR_IRQS check from probe()
rtc: imxdi: fix spelling mistake in warning message
rtc: ds1685: don't try to micromanage sysfs output size
rtc: use %ph for short hex dumps
rtc: da9063: avoid writing undefined data to rtc
rtc: sunxi: use of_device_get_match_data
rtc: sunxi: constify the data_year_param structure
rtc: sunxi: fix signedness issues
...
Linus Torvalds [Mon, 18 Jan 2016 19:58:31 +0000 (11:58 -0800)]
Merge tag 'fbdev-4.5' of git://git./linux/kernel/git/tomba/linux
Pull fbdev updates from Tomi Valkeinen:
"Summary:
- pxafb: device-tree support
- An unsafe kernel parameter 'lockless_register_fb' for debugging
problems happening while inside the console lock
- Small miscellaneous fixes & cleanups
- omapdss: add writeback support functions
- Separation of omapfb and omapdrm (see below)
About the separation of omapfb and omapdrm, see
http://permalink.gmane.org/gmane.comp.video.dri.devel/143151
for longer story. The short version:
omapfb and omapdrm have shared low level drivers (omapdss and panel
drivers), making further development of omapdrm difficult. After
these patches omapfb and omapdrm have their own versions of the
drivers, which are more or less direct copies for now but will diverge
soon.
This also means that omapfb (everything under drivers/video/fbdev/omap2/)
is now in maintenance mode, and all new development will be done for
omapdrm (drivers/gpu/drm/omapdrm/)"
* tag 'fbdev-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (49 commits)
video: fbdev: pxafb: fix out of memory error path
drm/omap: make omapdrm select OMAP2_DSS
drm/omap: move omapdss & displays under omapdrm
omapfb: move vrfb into omapfb
omapfb: take omapfb's private omapdss into use
omapfb/displays: change CONFIG_DISPLAY_* to CONFIG_FB_OMAP2_*
omapfb/dss: change CONFIG_OMAP* to CONFIG_FB_OMAP*
omapdss: remove CONFIG_OMAP2_DSS_VENC from omapdss.h
omapfb: copy omapdss & displays for omapfb
omapfb: allow compilation only if DRM_OMAP is disabled
fbdev: omap2: panel-dpi: simplify gpio setting
fbdev: omap2: panel-dpi: in .disable first disable backlight then display
OMAPDSS: DSS: fix a warning message
video: omapdss: delete unneeded of_node_put
OMAPDSS: DISPC: Remove boolean comparisons
OMAPDSS: DSI: cleanup DSI_IRQ_ERROR_MASK define
OMAPDSS: remove extra out == NULL checks
OMAPDSS: change internal dispc functions to static
OMAPDSS: make a two dss feat funcs internal to omapdss
OMAPDSS: remove extra EXPORT_SYMBOLs
...
Chris Metcalf [Tue, 5 Jan 2016 16:22:10 +0000 (11:22 -0500)]
numa: remove stale node_has_online_mem() define
This isn't used anywhere, so delete it.
Looks like the last usage (in x86-specific code) was removed by Tejun
in 2011 in commit
bd6709a91a59 ("x86, NUMA: Make 32bit use common NUMA
init path").
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Chris Metcalf [Wed, 23 Dec 2015 22:13:04 +0000 (17:13 -0500)]
arch/tile: move user_exit() to early kernel entry sequence
This ensures that we always notify context tracking that we
have exited from user space no matter how we enter the kernel.
It is similar to how arm64 handles context tracking, for example.
This allows the removal of all the exception_enter() calls that
were added in commit
49e4e15619cd ("tile: support CONTEXT_TRACKING and
thus NOHZ_FULL").
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Chris Metcalf [Wed, 23 Dec 2015 20:02:47 +0000 (15:02 -0500)]
tile: fix bug in setting PT_FLAGS_DISABLE_IRQ on kernel entry
This flag value is saved in ptregs and used to decide whether
to disable irqs when returning from the kernel. Commit
1168df528fe4
("tile: don't assume user privilege is zero") performed a bad
merge from some KVM-enabled code that had not yet been upstreamed.
The only issue with the old code is that we will read the interrupt
mask in more conditions than we need to (e.g., coming from user
space when user space has the Interrupt Critical Section bit set, or
coming from a guest kernel), which is a slow multi-cycle operation.
This change saves those few cycles in the common case.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Chris Metcalf [Mon, 21 Dec 2015 18:03:03 +0000 (13:03 -0500)]
tile: fix tilepro casts for readl, writel, etc
Missing parentheses could cause an argument of the form
"integer + pointer" to get cast to "(long)integer + pointer"
and remain a pointer type, causing compiler warnings.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Chris Metcalf [Mon, 21 Dec 2015 17:14:24 +0000 (12:14 -0500)]
tile: fix a -Wframe-larger-than warning
The warning occurs in setup.c, where it is known that it can't be
a problem, but it's still a good idea to silence the warning.
The onstack array is converted from an s32 to a u8, which still
is plenty of range for the values being managed there.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Chris Metcalf [Thu, 17 Dec 2015 20:01:38 +0000 (15:01 -0500)]
tile: include the syscall number in the backtrace
This information is easily available in the backtrace data and can
be helpful when trying to figure out the backtrace, particularly
if we're early in kernel entry or late in kernel exit.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Fengguang Wu [Fri, 18 Dec 2015 15:15:37 +0000 (10:15 -0500)]
MAINTAINERS: add git URL for tile
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Chris Metcalf [Tue, 22 Sep 2015 18:49:41 +0000 (14:49 -0400)]
arch/tile: adopt prepare_exit_to_usermode() model from x86
This change is a prerequisite change for TASK_ISOLATION but also
stands on its own for readability and maintainability. The existing
tile do_work_pending() was called in a loop from assembly on
the slow path; this change moves the loop into C code as well.
For the x86 version see commit
c5c46f59e4e7 ("x86/entry: Add new,
comprehensible entry and exit handlers written in C").
This change exposes a pre-existing bug on the older tilepro platform;
the singlestep processing is done last, but on tilepro (unlike tilegx)
we enable interrupts while doing that processing, so we could in
theory miss a signal or other asynchronous event. A future change
could fix this by breaking the singlestep work into a "prepare"
step done in the main loop, and a "trigger" step done after exiting
the loop. Since this change is intended as purely a restructuring
change, we call out the bug explicitly now, but don't yet fix it.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Paul Gortmaker [Wed, 9 Dec 2015 21:45:51 +0000 (16:45 -0500)]
drivers/ide: make ide-scan-pci.c driver explicitly non-modular
The Kconfig for this support is currently:
config IDEPCI_PCIBUS_ORDER
bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
...meaning that it currently is not being built as a module by anyone.
Lets change the initcall to be the equivalent device_initcall, so that
when reading the driver code, there is no doubt it is builtin-only.
Unlike other similar changes, we leave the module.h header to be
included since this code interacts with other drivers and needs to
know what a struct module is.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Sun, 15 Nov 2015 20:36:30 +0000 (21:36 +0100)]
ide: constify ide_dma_ops structures
The ide_dma_ops structures are never modified, so declare these as const,
as is already done for the others.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 13 Nov 2015 14:34:01 +0000 (17:34 +0300)]
ide: silence some underflow warnings
Back in the day we used to just say this code was root only so it was
ok that the bounds checking was sloppy. These days it annoys static
checkers so we fix it.
In the original code "c > INT_MAX" was never true since "c" was an int.
I am not sure what was intended so I left it alone. But because I made
"c" unsigned it means we don't have a warning any more.
The second warning is that we cap "i" but allow negatives leading to an
underflow of the ide_disks_chs[] array. The third set of warnings is
because these values come from the user and we cap most of the upper
bounds but allow negative values. Negative cylinders doesn't make
sense.
drivers/ide/ide.c:262 ide_set_disk_chs() warn: impossible condition '(c > ((~0 >> 1))) => (s32min-s32max > s32max)'
drivers/ide/ide.c:270 ide_set_disk_chs() warn: check 'ide_disks_chs[i]' for negative offsets 'i' = s32min. extra = 's32min-19'
drivers/ide/ide.c:271 ide_set_disk_chs() warn: no lower bound on 'h'
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Mon, 18 Jan 2016 17:03:48 +0000 (18:03 +0100)]
ovs: limit ovs recursions in ovs_execute_actions to not corrupt stack
It was seen that defective configurations of openvswitch could overwrite
the STACK_END_MAGIC and cause a hard crash of the kernel because of too
many recursions within ovs.
This problem arises due to the high stack usage of openvswitch. The rest
of the kernel is fine with the current limit of 10 (RECURSION_LIMIT).
We use the already existing recursion counter in ovs_execute_actions to
implement an upper bound of 5 recursions.
Cc: Pravin Shelar <pshelar@ovn.org>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 18 Jan 2016 15:30:22 +0000 (17:30 +0200)]
team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid
We can't be within an RCU read-side critical section when deleting
VLANs, as underlying drivers might sleep during the hardware operation.
Therefore, replace the RCU critical section with a mutex. This is
consistent with team_vlan_rx_add_vid.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
huangdaode [Mon, 18 Jan 2016 09:24:16 +0000 (17:24 +0800)]
net: hns: bug fix about hisilicon TSO BD mode
The current upstreaming code fails to set the tso_mode register
when initilizes, when processes large size packets, the default 4 bd is
not enough, so this patch initilizes it and set the default value to 8 bds
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arend van Spriel [Sat, 16 Jan 2016 15:39:13 +0000 (16:39 +0100)]
brcmfmac: fix BRCMF_FW_NVRAM_DEF macro for older gcc compilers
With gcc < 4.3 __UNIQUE_ID does not create unique ids with the macro
BRCMF_FW_NVRAM_DEF. Fix this by removing the MODULE_FIRMWARE instance
for the nvram file. This file is not in linux-firmware repo so it may
not be needed anyway. Otherwise consider this as a temporary fix.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arend van Spriel <aspriel@gmail.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Mon, 18 Jan 2016 12:52:29 +0000 (13:52 +0100)]
netfilter: nf_tables_netdev: fix error path in module initialization
Unregister the chain type and return error, otherwise this leaks the
subscription to the netdevice notifier call chain.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric Dumazet [Fri, 15 Jan 2016 16:21:32 +0000 (08:21 -0800)]
netfilter: xt_TCPMSS: handle CHECKSUM_COMPLETE in tcpmss_tg6()
In case MSS option is added in TCP options, skb length increases by 4.
IPv6 needs to update skb->csum if skb has CHECKSUM_COMPLETE,
otherwise kernel complains loudly in netdev_rx_csum_fault() with a
stack dump.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Robert Jarzmik [Sat, 19 Dec 2015 12:14:31 +0000 (13:14 +0100)]
video: fbdev: pxafb: fix out of memory error path
As seen by Julia, the initial allocation memory is not checked anymore
after commit "video: fbdev: pxafb: initial devicetree conversion".
Introduce back the removed test.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Linus Torvalds [Mon, 18 Jan 2016 03:13:15 +0000 (19:13 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
- EVM gains support for loading an x509 cert from the kernel
(EVM_LOAD_X509), into the EVM trusted kernel keyring.
- Smack implements 'file receive' process-based permission checking for
sockets, rather than just depending on inode checks.
- Misc enhancments for TPM & TPM2.
- Cleanups and bugfixes for SELinux, Keys, and IMA.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
selinux: Inode label revalidation performance fix
KEYS: refcount bug fix
ima: ima_write_policy() limit locking
IMA: policy can be updated zero times
selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
selinux: export validatetrans decisions
gfs2: Invalid security labels of inodes when they go invalid
selinux: Revalidate invalid inode security labels
security: Add hook to invalidate inode security labels
selinux: Add accessor functions for inode->i_security
security: Make inode argument of inode_getsecid non-const
security: Make inode argument of inode_getsecurity non-const
selinux: Remove unused variable in selinux_inode_init_security
keys, trusted: seal with a TPM2 authorization policy
keys, trusted: select hash algorithm for TPM2 chips
keys, trusted: fix: *do not* allow duplicate key options
tpm_ibmvtpm: properly handle interrupted packet receptions
tpm_tis: Tighten IRQ auto-probing
tpm_tis: Refactor the interrupt setup
tpm_tis: Get rid of the duplicate IRQ probing code
...
Linus Torvalds [Mon, 18 Jan 2016 02:48:49 +0000 (18:48 -0800)]
Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
"Seven audit patches for 4.5, all very minor despite the diffstat.
The diffstat churn for linux/audit.h can be attributed to needing to
reshuffle the linux/audit.h header to fix the seccomp auditing issue
(see the commit description for details).
Besides the seccomp/audit fix, most of the fixes are around trying to
improve the connection with the audit daemon and a Kconfig
simplification. Nothing crazy, and everything passes our little
audit-testsuite"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
audit: always enable syscall auditing when supported and audit is enabled
audit: force seccomp event logging to honor the audit_enabled flag
audit: Delete unnecessary checks before two function calls
audit: wake up threads if queue switched from limited to unlimited
audit: include auditd's threads in audit_log_start() wait exception
audit: remove audit_backlog_wait_overflow
audit: don't needlessly reset valid wait time
Linus Torvalds [Mon, 18 Jan 2016 02:33:15 +0000 (18:33 -0800)]
vm: fix incorrect unlock error path in madvise_free_huge_pmd
Commit
b8d3c4c3009d ("mm/huge_memory.c: don't split THP page when
MADV_FREE syscall is called") introduced this new function, but got the
error handling for when pmd_trans_huge_lock() fails wrong. In the
failure case, the lock has not been taken, and we should not unlock on
the way out.
Cc: Minchan Kim <minchan@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Sun, 17 Jan 2016 23:10:42 +0000 (09:10 +1000)]
drm/vc4: fix warning in validate printf.
This just fixes a warning on 64-bit builds:
drivers/gpu/drm/vc4/vc4_validate.c: In function ‘validate_gl_shader_rec’:
drivers/gpu/drm/vc4/vc4_validate.c:864:12: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t {aka long unsigned int}’ [-Wformat=]
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Martin Blumenstingl [Fri, 15 Jan 2016 00:55:24 +0000 (01:55 +0100)]
net: phy: at803x: Add the interrupt register bit definitions
Also use them instead of a magic value when enabling the interrupts.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Blumenstingl [Fri, 15 Jan 2016 00:55:23 +0000 (01:55 +0100)]
net: phy: at803x: Clean up duplicate register definitions
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This page took 0.053835 seconds and 5 git commands to generate.