Li Wei [Thu, 29 Jan 2015 08:09:03 +0000 (16:09 +0800)]
ipv4: Don't increase PMTU with Datagram Too Big message.
RFC 1191 said, "a host MUST not increase its estimate of the Path
MTU in response to the contents of a Datagram Too Big message."
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Jan 2015 23:08:27 +0000 (15:08 -0800)]
Merge branch 'arm-build-fixes'
Arnd Bergmann says:
====================
net: driver fixes from arm randconfig builds
These four patches are fallout from test builds on ARM. I have a
few more of them in my backlog but have not yet confirmed them
to still be valid.
The first three patches are about incomplete dependencies on
old drivers. One could backport them to the beginning of time
in theory, but there is little value since nobody would run into
these problems.
The final patch is one I had submitted before together with the
respective pcmcia patch but forgot to follow up on that. It's
still a valid but relatively theoretical bug, because the previous
behavior of the driver was just as broken as what we have in
mainline.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 28 Jan 2015 14:15:04 +0000 (15:15 +0100)]
net: am2150: fix nmclan_cs.c shared interrupt handling
A recent patch tried to work around a valid warning for the use of a
deprecated interface by blindly changing from the old
pcmcia_request_exclusive_irq() interface to pcmcia_request_irq().
This driver has an interrupt handler that is not currently aware
of shared interrupts, but can be easily converted to be.
At the moment, the driver reads the interrupt status register
repeatedly until it contains only zeroes in the interesting bits,
and handles each bit individually.
This patch adds the missing part of returning IRQ_NONE in case none
of the bits are set to start with, so we can move on to the next
interrupt source.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5f5316fcd08ef7 ("am2150: Update nmclan_cs.c to use update PCMCIA API")
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 28 Jan 2015 14:15:03 +0000 (15:15 +0100)]
net: lance,ni64: don't build for ARM
The ni65 and lance ethernet drivers manually program the ISA DMA
controller that is only available on x86 PCs and a few compatible
systems. Trying to build it on ARM results in this error:
ni65.c: In function 'ni65_probe1':
ni65.c:496:62: error: 'DMA1_STAT_REG' undeclared (first use in this function)
((inb(DMA1_STAT_REG) >> 4) & 0x0f)
^
ni65.c:496:62: note: each undeclared identifier is reported only once for each function it appears in
ni65.c:497:63: error: 'DMA2_STAT_REG' undeclared (first use in this function)
| (inb(DMA2_STAT_REG) & 0xf0);
The DMA1_STAT_REG and DMA2_STAT_REG registers are only defined for
alpha, mips, parisc, powerpc and x86, although it is not clear
which subarchitectures actually have them at the correct location.
This patch for now just disables it for ARM, to avoid randconfig
build errors. We could also decide to limit it to the set of
architectures on which it does compile, but that might look more
deliberate than guessing based on where the drivers build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 28 Jan 2015 14:15:02 +0000 (15:15 +0100)]
net: wan: add missing virt_to_bus dependencies
The cosa driver is rather outdated and does not get built on most
platforms because it requires the ISA_DMA_API symbol. However
there are some ARM platforms that have ISA_DMA_API but no virt_to_bus,
and they get this build error when enabling the ltpc driver.
drivers/net/wan/cosa.c: In function 'tx_interrupt':
drivers/net/wan/cosa.c:1768:3: error: implicit declaration of function 'virt_to_bus'
unsigned long addr = virt_to_bus(cosa->txbuf);
^
The same problem exists for the Hostess SV-11 and Sealevel Systems 4021
drivers.
This adds another dependency in Kconfig to avoid that configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 28 Jan 2015 14:15:01 +0000 (15:15 +0100)]
net: cs89x0: always build platform code if !HAS_IOPORT_MAP
The cs89x0 driver can either be built as an ISA driver or a platform
driver, the choice is controlled by the CS89x0_PLATFORM Kconfig
symbol. Building the ISA driver on a system that does not have
a way to map I/O ports fails with this error:
drivers/built-in.o: In function `cs89x0_ioport_probe.constprop.1':
:(.init.text+0x4794): undefined reference to `ioport_map'
:(.init.text+0x4830): undefined reference to `ioport_unmap'
This changes the Kconfig logic to take that option away and
always force building the platform variant of this driver if
CONFIG_HAS_IOPORT_MAP is not set. This is the only correct
choice in this case, and it avoids the build error.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Wed, 28 Jan 2015 09:56:04 +0000 (10:56 +0100)]
ppp: deflate: never return len larger than output buffer
When we've run out of space in the output buffer to store more data, we
will call zlib_deflate with a NULL output buffer until we've consumed
remaining input.
When this happens, olen contains the size the output buffer would have
consumed iff we'd have had enough room.
This can later cause skb_over_panic when ppp_generic skb_put()s
the returned length.
Reported-by: Iain Douglas <centos@1n6.org.uk>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Jan 2015 22:20:16 +0000 (14:20 -0800)]
Merge branch 'netns'
Nicolas Dichtel says:
====================
netns: audit netdevice creation with IFLA_NET_NS_[PID|FD]
When one of these attributes is set, the netdevice is created into the netns
pointed by IFLA_NET_NS_[PID|FD] (see the call to rtnl_create_link() in
rtnl_newlink()). Let's call this netns the dest_net. After this creation, if the
newlink handler exists, it is called with a netns argument that points to the
netns where the netlink message has been received (called src_net in the code)
which is the link netns.
Hence, with one of these attributes, it's possible to create a x-netns
netdevice.
Here is the result of my code review:
- all ip tunnels (sit, ipip, ip6_tunnels, gre[tap][v6], ip_vti[6]) does not
really allows to use this feature: the netdevice is created in the dest_net
and the src_net is completely ignored in the newlink handler.
- VLAN properly handles this x-netns creation.
- bridge ignores src_net, which seems fine (NETIF_F_NETNS_LOCAL is set).
- CAIF subsystem is not clear for me (I don't know how it works), but it seems
to wrongly use src_net. Patch #1 tries to fix this, but it was done only by
code review (and only compile-tested), so please carefully review it. I may
miss something.
- HSR subsystem uses src_net to parse IFLA_HSR_SLAVE[1|2], but the netdevice has
the flag NETIF_F_NETNS_LOCAL, so the question is: does this netdevice really
supports x-netns? If not, the newlink handler should use the dest_net instead
of src_net, I can provide the patch.
- ieee802154 uses also src_net and does not have NETIF_F_NETNS_LOCAL. Same
question: does this netdevice really supports x-netns?
- bonding ignores src_net and flag NETIF_F_NETNS_LOCAL is set, ie x-netns is not
supported. Fine.
- CAN does not support rtnl/newlink, ok.
- ipvlan uses src_net and does not have NETIF_F_NETNS_LOCAL. After looking at
the code, it seems that this drivers support x-netns. Am I right?
- macvlan/macvtap uses src_net and seems to have x-netns support.
- team ignores src_net and has the flag NETIF_F_NETNS_LOCAL, ie x-netns is not
supported. Ok.
- veth uses src_net and have x-netns support ;-) Ok.
- VXLAN didn't properly handle this. The link netns (vxlan->net) is the src_net
and not dest_net (see patch #2). Note that it was already possible to create a
x-netns vxlan before the commit
f01ec1c017de ("vxlan: add x-netns support")
but the nedevice remains broken.
To summarize:
- CAIF patch must be carefully reviewed
- for HSR, ieee802154, ipvlan: is x-netns supported?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Mon, 26 Jan 2015 21:28:14 +0000 (22:28 +0100)]
vxlan: setup the right link netns in newlink hdlr
Rename the netns to src_net to avoid confusion with the netns where the
interface stands. The user may specify IFLA_NET_NS_[PID|FD] to create
a x-netns netndevice: IFLA_NET_NS_[PID|FD] points to the netns where the
netdevice stands and src_net to the link netns.
Note that before commit
f01ec1c017de ("vxlan: add x-netns support"), it was
possible to create a x-netns vxlan netdevice, but the netdevice was not
operational.
Fixes: f01ec1c017de ("vxlan: add x-netns support")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Mon, 26 Jan 2015 21:28:13 +0000 (22:28 +0100)]
caif: remove wrong dev_net_set() call
src_net points to the netns where the netlink message has been received. This
netns may be different from the netns where the interface is created (because
the user may add IFLA_NET_NS_[PID|FD]). In this case, src_net is the link netns.
It seems wrong to override the netns in the newlink() handler because if it
was not already src_net, it means that the user explicitly asks to create the
netdevice in another netns.
CC: Sjur Brændeland <sjur.brandeland@stericsson.com>
CC: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
Fixes: 8391c4aab1aa ("caif: Bugfixes in CAIF netdevice for close and flow control")
Fixes: c41254006377 ("caif-hsi: Add rtnl support")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
karl beldan [Thu, 29 Jan 2015 10:10:22 +0000 (11:10 +0100)]
lib/checksum.c: fix build for generic csum_tcpudp_nofold
Fixed commit added from64to32 under _#ifndef do_csum_ but used it
under _#ifndef csum_tcpudp_nofold_, breaking some builds (Fengguang's
robot reported TILEGX's). Move from64to32 under the latter.
Fixes: 150ae0e94634 ("lib/checksum.c: fix carry in csum_tcpudp_nofold")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 28 Jan 2015 13:47:11 +0000 (05:47 -0800)]
tcp: ipv4: initialize unicast_sock sk_pacing_rate
When I added sk_pacing_rate field, I forgot to initialize its value
in the per cpu unicast_sock used in ip_send_unicast_reply()
This means that for sch_fq users, RST packets, or ACK packets sent
on behalf of TIME_WAIT sockets might be sent to slowly or even dropped
once we reach the per flow limit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing")
Signed-off-by: David S. Miller <davem@davemloft.net>
karl beldan [Wed, 28 Jan 2015 09:58:11 +0000 (10:58 +0100)]
lib/checksum.c: fix carry in csum_tcpudp_nofold
The carry from the 64->32bits folding was dropped, e.g with:
saddr=0xFFFFFFFF daddr=0xFF0000FF len=0xFFFF proto=0 sum=1,
csum_tcpudp_nofold returned 0 instead of 1.
Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Thu, 29 Jan 2015 00:23:11 +0000 (16:23 -0800)]
bridge: dont send notification when skb->len == 0 in rtnl_bridge_notify
Reported in: https://bugzilla.kernel.org/show_bug.cgi?id=92081
This patch avoids calling rtnl_notify if the device ndo_bridge_getlink
handler does not return any bytes in the skb.
Alternately, the skb->len check can be moved inside rtnl_notify.
For the bridge vlan case described in 92081, there is also a fix needed
in bridge driver to generate a proper notification. Will fix that in
subsequent patch.
v2: rebase patch on net tree
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Jan 2015 06:19:09 +0000 (22:19 -0800)]
Merge branch 'tcp_stretch_acks'
Neal Cardwell says:
====================
fix stretch ACK bugs in TCP CUBIC and Reno
This patch series fixes the TCP CUBIC and Reno congestion control
modules to properly handle stretch ACKs in their respective additive
increase modes, and in the transitions from slow start to additive
increase.
This finishes the project started by commit
9f9843a751d0a2057 ("tcp:
properly handle stretch acks in slow start"), which fixed behavior for
TCP congestion control when handling stretch ACKs in slow start mode.
Motivation: In the Jan 2015 netdev thread 'BW regression after "tcp:
refine TSO autosizing"', Eyal Perry documented a regression that Eric
Dumazet determined was caused by improper handling of TCP stretch
ACKs.
Background: LRO, GRO, delayed ACKs, and middleboxes can cause "stretch
ACKs" that cover more than the RFC-specified maximum of 2
packets. These stretch ACKs can cause serious performance shortfalls
in common congestion control algorithms, like Reno and CUBIC, which
were designed and tuned years ago with receiver hosts that were not
using LRO or GRO, and were instead ACKing every other packet.
Testing: at Google we have been using this approach for handling
stretch ACKs for CUBIC datacenter and Internet traffic for several
years, with good results.
v2:
* fixed return type of tcp_slow_start() to be u32 instead of int
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 29 Jan 2015 01:01:39 +0000 (20:01 -0500)]
tcp: fix timing issue in CUBIC slope calculation
This patch fixes a bug in CUBIC that causes cwnd to increase slightly
too slowly when multiple ACKs arrive in the same jiffy.
If cwnd is supposed to increase at a rate of more than once per jiffy,
then CUBIC was sometimes too slow. Because the bic_target is
calculated for a future point in time, calculated with time in
jiffies, the cwnd can increase over the course of the jiffy while the
bic_target calculated as the proper CUBIC cwnd at time
t=tcp_time_stamp+rtt does not increase, because tcp_time_stamp only
increases on jiffy tick boundaries.
So since the cnt is set to:
ca->cnt = cwnd / (bic_target - cwnd);
as cwnd increases but bic_target does not increase due to jiffy
granularity, the cnt becomes too large, causing cwnd to increase
too slowly.
For example:
- suppose at the beginning of a jiffy, cwnd=40, bic_target=44
- so CUBIC sets:
ca->cnt = cwnd / (bic_target - cwnd) = 40 / (44 - 40) = 40/4 = 10
- suppose we get 10 acks, each for 1 segment, so tcp_cong_avoid_ai()
increases cwnd to 41
- so CUBIC sets:
ca->cnt = cwnd / (bic_target - cwnd) = 41 / (44 - 41) = 41 / 3 = 13
So now CUBIC will wait for 13 packets to be ACKed before increasing
cwnd to 42, insted of 10 as it should.
The fix is to avoid adjusting the slope (determined by ca->cnt)
multiple times within a jiffy, and instead skip to compute the Reno
cwnd, the "TCP friendliness" code path.
Reported-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 29 Jan 2015 01:01:38 +0000 (20:01 -0500)]
tcp: fix stretch ACK bugs in CUBIC
Change CUBIC to properly handle stretch ACKs in additive increase mode
by passing in the count of ACKed packets to tcp_cong_avoid_ai().
In addition, because we are now precisely accounting for stretch ACKs,
including delayed ACKs, we can now remove the delayed ACK tracking and
estimation code that tracked recent delayed ACK behavior in
ca->delayed_ack.
Reported-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 29 Jan 2015 01:01:37 +0000 (20:01 -0500)]
tcp: fix stretch ACK bugs in Reno
Change Reno to properly handle stretch ACKs in additive increase mode
by passing in the count of ACKed packets to tcp_cong_avoid_ai().
In addition, if snd_cwnd crosses snd_ssthresh during slow start
processing, and we then exit slow start mode, we need to carry over
any remaining "credit" for packets ACKed and apply that to additive
increase by passing this remaining "acked" count to
tcp_cong_avoid_ai().
Reported-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 29 Jan 2015 01:01:36 +0000 (20:01 -0500)]
tcp: fix the timid additive increase on stretch ACKs
tcp_cong_avoid_ai() was too timid (snd_cwnd increased too slowly) on
"stretch ACKs" -- cases where the receiver ACKed more than 1 packet in
a single ACK. For example, suppose w is 10 and we get a stretch ACK
for 20 packets, so acked is 20. We ought to increase snd_cwnd by 2
(since acked/w = 20/10 = 2), but instead we were only increasing cwnd
by 1. This patch fixes that behavior.
Reported-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 29 Jan 2015 01:01:35 +0000 (20:01 -0500)]
tcp: stretch ACK fixes prep
LRO, GRO, delayed ACKs, and middleboxes can cause "stretch ACKs" that
cover more than the RFC-specified maximum of 2 packets. These stretch
ACKs can cause serious performance shortfalls in common congestion
control algorithms that were designed and tuned years ago with
receiver hosts that were not using LRO or GRO, and were instead
politely ACKing every other packet.
This patch series fixes Reno and CUBIC to handle stretch ACKs.
This patch prepares for the upcoming stretch ACK bug fix patches. It
adds an "acked" parameter to tcp_cong_avoid_ai() to allow for future
fixes to tcp_cong_avoid_ai() to correctly handle stretch ACKs, and
changes all congestion control algorithms to pass in 1 for the ACKed
count. It also changes tcp_slow_start() to return the number of packet
ACK "credits" that were not processed in slow start mode, and can be
processed by the congestion control module in additive increase mode.
In future patches we will fix tcp_cong_avoid_ai() to handle stretch
ACKs, and fix Reno and CUBIC handling of stretch ACKs in slow start
and additive increase mode.
Reported-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 27 Jan 2015 21:55:36 +0000 (13:55 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Don't OOPS on socket AIO, from Christoph Hellwig.
2) Scheduled scans should be aborted upon RFKILL, from Emmanuel
Grumbach.
3) Fix sleep in atomic context in kvaser_usb, from Ahmed S Darwish.
4) Fix RCU locking across copy_to_user() in bpf code, from Alexei
Starovoitov.
5) Lots of crash, memory leak, short TX packet et al bug fixes in
sh_eth from Ben Hutchings.
6) Fix memory corruption in SCTP wrt. INIT collitions, from Daniel
Borkmann.
7) Fix return value logic for poll handlers in netxen, enic, and bnx2x.
From Eric Dumazet and Govindarajulu Varadarajan.
8) Header length calculation fix in mac80211 from Fred Chou.
9) mv643xx_eth doesn't handle highmem correctly in non-TSO code paths.
From Ezequiel Garcia.
10) udp_diag has bogus logic in it's hash chain skipping, copy same fix
tcp diag used. From Herbert Xu.
11) amd-xgbe programs wrong rx flow control register, from Thomas
Lendacky.
12) Fix race leading to use after free in ping receive path, from Subash
Abhinov Kasiviswanathan.
13) Cache redirect routes otherwise we can get a heavy backlog of rcu
jobs liberating DST_NOCACHE entries. From Hannes Frederic Sowa.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
net: don't OOPS on socket aio
stmmac: prevent probe drivers to crash kernel
bnx2x: fix napi poll return value for repoll
ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too
sh_eth: Fix DMA-API usage for RX buffers
sh_eth: Check for DMA mapping errors on transmit
sh_eth: Ensure DMA engines are stopped before freeing buffers
sh_eth: Remove RX overflow log messages
ping: Fix race in free in receive path
udp_diag: Fix socket skipping within chain
can: kvaser_usb: Fix state handling upon BUS_ERROR events
can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT
can: kvaser_usb: Send correct context to URB completion
can: kvaser_usb: Do not sleep in atomic context
ipv4: try to cache dst_entries which would cause a redirect
samples: bpf: relax test_maps check
bpf: rcu lock must not be held when calling copy_to_user()
net: sctp: fix slab corruption from use after free on INIT collisions
net: mv643xx_eth: Fix highmem support in non-TSO egress path
sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers
...
Christoph Hellwig [Tue, 27 Jan 2015 20:25:33 +0000 (12:25 -0800)]
net: don't OOPS on socket aio
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Tue, 27 Jan 2015 16:38:03 +0000 (18:38 +0200)]
stmmac: prevent probe drivers to crash kernel
In the case when alloc_netdev fails we return NULL to a caller. But there is no
check for NULL in the probe drivers. This patch changes NULL to an error
pointer. The function description is amended to reflect what we may get
returned.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 27 Jan 2015 18:04:38 +0000 (10:04 -0800)]
Merge tag 'powerpc-3.19-5' of git://git./linux/kernel/git/mpe/linux
Pull powerpc fixes from Michael Ellerman:
"Two powerpc fixes"
* tag 'powerpc-3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc/powernv: Restore LPCR with LPCR_PECE1 cleared
powerpc/xmon: Fix another endiannes issue in RTAS call from xmon
Linus Torvalds [Tue, 27 Jan 2015 17:02:09 +0000 (09:02 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/rusty/linux
Pull one more module fix from Rusty Russell:
"SCSI was using module_refcount() to figure out when the module was
unloading: this broke with new atomic refcounting. The code is still
suspicious, but this solves the WARN_ON()"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
scsi: always increment reference count
Govindarajulu Varadarajan [Sun, 25 Jan 2015 10:39:23 +0000 (16:09 +0530)]
bnx2x: fix napi poll return value for repoll
With the commit
d75b1ade567ffab ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget. When in busy_poll is we return 0
in napi_poll. We should return budget.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 27 Jan 2015 08:28:38 +0000 (00:28 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
ipsec 2015-01-26
Just two small fixes for _decode_session6() where we
might decode to wrong header information in some rare
situations.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Mon, 26 Jan 2015 14:11:17 +0000 (15:11 +0100)]
ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too
Lubomir Rintel reported that during replacing a route the interface
reference counter isn't correctly decremented.
To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>:
| [root@rhel7-5 lkundrak]# sh -x lal
| + ip link add dev0 type dummy
| + ip link set dev0 up
| + ip link add dev1 type dummy
| + ip link set dev1 up
| + ip addr add 2001:db8:8086::2/64 dev dev0
| + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20
| + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10
| + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20
| + ip link del dev0 type dummy
| Message from syslogd@rhel7-5 at Jan 23 10:54:41 ...
| kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2
|
| Message from syslogd@rhel7-5 at Jan 23 10:54:51 ...
| kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2
During replacement of a rt6_info we must walk all parent nodes and check
if the to be replaced rt6_info got propagated. If so, replace it with
an alive one.
Fixes: 4a287eba2de3957 ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag")
Reported-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 27 Jan 2015 08:18:57 +0000 (00:18 -0800)]
Merge branch 'sh_eth'
Ben Hutchings says:
====================
Fixes for sh_eth #3
I'm continuing review and testing of Ethernet support on the R-Car H2
chip. This series fixes the last of the more serious issues I've found.
These are not tested on any of the other supported chips.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 27 Jan 2015 00:50:24 +0000 (00:50 +0000)]
sh_eth: Fix DMA-API usage for RX buffers
- Use the return value of dma_map_single(), rather than calling
virt_to_page() separately
- Check for mapping failue
- Call dma_unmap_single() rather than dma_sync_single_for_cpu()
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 27 Jan 2015 00:49:47 +0000 (00:49 +0000)]
sh_eth: Check for DMA mapping errors on transmit
dma_map_single() may fail if an IOMMU or swiotlb is in use, so
we need to check for this.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 27 Jan 2015 00:49:32 +0000 (00:49 +0000)]
sh_eth: Ensure DMA engines are stopped before freeing buffers
Currently we try to clear EDRRR and EDTRR and immediately continue to
free buffers. This is unsafe because:
- In general, register writes are not serialised with DMA, so we still
have to wait for DMA to complete somehow
- The R8A7790 (R-Car H2) manual states that the TX running flag cannot
be cleared by writing to EDTRR
- The same manual states that clearing the RX running flag only stops
RX DMA at the next packet boundary
I applied this patch to the driver to detect DMA writes to freed
buffers:
> --- a/drivers/net/ethernet/renesas/sh_eth.c
> +++ b/drivers/net/ethernet/renesas/sh_eth.c
> @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev)
> /* Free Rx skb ringbuffer */
> if (mdp->rx_skbuff) {
> for (i = 0; i < mdp->num_rx_ring; i++)
> + memcpy(mdp->rx_skbuff[i]->data,
> + "Hello, world", 12);
> + msleep(100);
> + for (i = 0; i < mdp->num_rx_ring; i++) {
> + WARN_ON(memcmp(mdp->rx_skbuff[i]->data,
> + "Hello, world", 12));
> dev_kfree_skb(mdp->rx_skbuff[i]);
> + }
> }
> kfree(mdp->rx_skbuff);
> mdp->rx_skbuff = NULL;
then ran the loop:
while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done
and 'ping -f' toward the sh_eth port from another machine. The
warning fired several times a minute.
To fix these issues:
- Deactivate all TX descriptors rather than writing to EDTRR
- As there seems to be no way of telling when RX DMA is stopped,
perform a soft reset to ensure that both DMA enginess are stopped
- To reduce the possibility of the reset truncating a transmitted
frame, disable egress and wait a reasonable time to reach a
packet boundary before resetting
- Update statistics before resetting
(The 'reasonable time' does not allow for CS/CD in half-duplex
mode, but half-duplex no longer seems reasonable!)
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 27 Jan 2015 00:41:16 +0000 (00:41 +0000)]
sh_eth: Remove RX overflow log messages
If RX traffic is overflowing the FIFO or DMA ring, logging every time
this happens just makes things worse. These errors are visible in the
statistics anyway.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 27 Jan 2015 08:13:05 +0000 (00:13 -0800)]
Merge tag 'linux-can-fixes-for-3.19-
20150127' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2015-01-27
this is another pull request for net/master which consists of 4 patches.
All 4 patches are contributed by Ahmed S. Darwish, he fixes more problems in
the kvaser_usb driver.
David, please merge net/master to net-next/master, as we have more kvaser_usb
patches in the queue, that target net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
subashab@codeaurora.org [Fri, 23 Jan 2015 22:26:02 +0000 (22:26 +0000)]
ping: Fix race in free in receive path
An exception is seen in ICMP ping receive path where the skb
destructor sock_rfree() tries to access a freed socket. This happens
because ping_rcv() releases socket reference with sock_put() and this
internally frees up the socket. Later icmp_rcv() will try to free the
skb and as part of this, skb destructor is called and which leads
to a kernel panic as the socket is freed already in ping_rcv().
-->|exception
-007|sk_mem_uncharge
-007|sock_rfree
-008|skb_release_head_state
-009|skb_release_all
-009|__kfree_skb
-010|kfree_skb
-011|icmp_rcv
-012|ip_local_deliver_finish
Fix this incorrect free by cloning this skb and processing this cloned
skb instead.
This patch was suggested by Eric Dumazet
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 23 Jan 2015 21:02:40 +0000 (08:02 +1100)]
udp_diag: Fix socket skipping within chain
While working on rhashtable walking I noticed that the UDP diag
dumping code is buggy. In particular, the socket skipping within
a chain never happens, even though we record the number of sockets
that should be skipped.
As this code was supposedly copied from TCP, this patch does what
TCP does and resets num before we walk a chain.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ahmed S. Darwish [Mon, 26 Jan 2015 05:25:43 +0000 (07:25 +0200)]
can: kvaser_usb: Fix state handling upon BUS_ERROR events
While being in an ERROR_WARNING state, and receiving further
bus error events with error counters still in the ERROR_WARNING
range of 97-127 inclusive, the state handling code erroneously
reverts back to ERROR_ACTIVE.
Per the CAN standard, only revert to ERROR_ACTIVE when the
error counters are less than 96.
Moreover, in certain Kvaser models, the BUS_ERROR flag is
always set along with undefined bits in the M16C status
register. Thus use bitwise operators instead of full equality
for checking that register against bus errors.
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ahmed S. Darwish [Mon, 26 Jan 2015 05:24:06 +0000 (07:24 +0200)]
can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT
On some x86 laptops, plugging a Kvaser device again after an
unplug makes the firmware always ignore the very first command.
For such a case, provide some room for retries instead of
completely exiting the driver init code.
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ahmed S. Darwish [Mon, 26 Jan 2015 05:22:54 +0000 (07:22 +0200)]
can: kvaser_usb: Send correct context to URB completion
Send expected argument to the URB completion hander: a CAN
netdevice instead of the network interface private context
`kvaser_usb_net_priv'.
This was discovered by having some garbage in the kernel
log in place of the netdevice names: can0 and can1.
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ahmed S. Darwish [Mon, 26 Jan 2015 05:20:39 +0000 (07:20 +0200)]
can: kvaser_usb: Do not sleep in atomic context
Upon receiving a hardware event with the BUS_RESET flag set,
the driver kills all of its anchored URBs and resets all of
its transmit URB contexts.
Unfortunately it does so under the context of URB completion
handler `kvaser_usb_read_bulk_callback()', which is often
called in an atomic context.
While the device is flooded with many received error packets,
usb_kill_urb() typically sleeps/reschedules till the transfer
request of each killed URB in question completes, leading to
the sleep in atomic bug. [3]
In v2 submission of the original driver patch [1], it was
stated that the URBs kill and tx contexts reset was needed
since we don't receive any tx acknowledgments later and thus
such resources will be locked down forever. Fortunately this
is no longer needed since an earlier bugfix in this patch
series is now applied: all tx URB contexts are reset upon CAN
channel close. [2]
Moreover, a BUS_RESET is now treated _exactly_ like a BUS_OFF
event, which is the recommended handling method advised by
the device manufacturer.
[1] http://article.gmane.org/gmane.linux.network/239442
http://www.webcitation.org/6Vr2yagAQ
[2] can: kvaser_usb: Reset all URB tx contexts upon channel close
889b77f7fd2bcc922493d73a4c51d8a851505815
[3] Stacktrace:
<IRQ> [<
ffffffff8158de87>] dump_stack+0x45/0x57
[<
ffffffff8158b60c>] __schedule_bug+0x41/0x4f
[<
ffffffff815904b1>] __schedule+0x5f1/0x700
[<
ffffffff8159360a>] ? _raw_spin_unlock_irqrestore+0xa/0x10
[<
ffffffff81590684>] schedule+0x24/0x70
[<
ffffffff8147d0a5>] usb_kill_urb+0x65/0xa0
[<
ffffffff81077970>] ? prepare_to_wait_event+0x110/0x110
[<
ffffffff8147d7d8>] usb_kill_anchored_urbs+0x48/0x80
[<
ffffffffa01f4028>] kvaser_usb_unlink_tx_urbs+0x18/0x50 [kvaser_usb]
[<
ffffffffa01f45d0>] kvaser_usb_rx_error+0xc0/0x400 [kvaser_usb]
[<
ffffffff8108b14a>] ? vprintk_default+0x1a/0x20
[<
ffffffffa01f5241>] kvaser_usb_read_bulk_callback+0x4c1/0x5f0 [kvaser_usb]
[<
ffffffff8147a73e>] __usb_hcd_giveback_urb+0x5e/0xc0
[<
ffffffff8147a8a1>] usb_hcd_giveback_urb+0x41/0x110
[<
ffffffffa0008748>] finish_urb+0x98/0x180 [ohci_hcd]
[<
ffffffff810cd1a7>] ? acct_account_cputime+0x17/0x20
[<
ffffffff81069f65>] ? local_clock+0x15/0x30
[<
ffffffffa000a36b>] ohci_work+0x1fb/0x5a0 [ohci_hcd]
[<
ffffffff814fbb31>] ? process_backlog+0xb1/0x130
[<
ffffffffa000cd5b>] ohci_irq+0xeb/0x270 [ohci_hcd]
[<
ffffffff81479fc1>] usb_hcd_irq+0x21/0x30
[<
ffffffff8108bfd3>] handle_irq_event_percpu+0x43/0x120
[<
ffffffff8108c0ed>] handle_irq_event+0x3d/0x60
[<
ffffffff8108ec84>] handle_fasteoi_irq+0x74/0x110
[<
ffffffff81004dfd>] handle_irq+0x1d/0x30
[<
ffffffff81004727>] do_IRQ+0x57/0x100
[<
ffffffff8159482a>] common_interrupt+0x6a/0x6a
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
David S. Miller [Tue, 27 Jan 2015 01:32:24 +0000 (17:32 -0800)]
Merge tag 'mac80211-for-davem-2015-01-23' of git://git./linux/kernel/git/jberg/mac80211
Another set of last-minute fixes:
* fix station double-removal when suspending while associating
* fix the HT (802.11n) header length calculation
* fix the CCK radiotap flag used for monitoring, a pretty
old regression but a simple one-liner
* fix per-station group-key handling
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Fri, 23 Jan 2015 11:01:26 +0000 (12:01 +0100)]
ipv4: try to cache dst_entries which would cause a redirect
Not caching dst_entries which cause redirects could be exploited by hosts
on the same subnet, causing a severe DoS attack. This effect aggravated
since commit
f88649721268999 ("ipv4: fix dst race in sk_dst_get()").
Lookups causing redirects will be allocated with DST_NOCACHE set which
will force dst_release to free them via RCU. Unfortunately waiting for
RCU grace period just takes too long, we can end up with >1M dst_entries
waiting to be released and the system will run OOM. rcuos threads cannot
catch up under high softirq load.
Attaching the flag to emit a redirect later on to the specific skb allows
us to cache those dst_entries thus reducing the pressure on allocation
and deallocation.
This issue was discovered by Marcelo Leitner.
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Marcelo Leitner <mleitner@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 27 Jan 2015 01:20:48 +0000 (17:20 -0800)]
Merge branch 'bpf'
Alexei Starovoitov says:
====================
bpf: fix two bugs
Michael Holzheu caught two issues (in bpf syscall and in the test).
Fix them. Details in corresponding patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Fri, 23 Jan 2015 01:11:09 +0000 (17:11 -0800)]
samples: bpf: relax test_maps check
hash map is unordered, so get_next_key() iterator shouldn't
rely on particular order of elements. So relax this test.
Fixes: ffb65f27a155 ("bpf: add a testsuite for eBPF maps")
Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Fri, 23 Jan 2015 01:11:08 +0000 (17:11 -0800)]
bpf: rcu lock must not be held when calling copy_to_user()
BUG: sleeping function called from invalid context at mm/memory.c:3732
in_atomic(): 0, irqs_disabled(): 0, pid: 671, name: test_maps
1 lock held by test_maps/671:
#0: (rcu_read_lock){......}, at: [<
0000000000264190>] map_lookup_elem+0xe8/0x260
Call Trace:
([<
0000000000115b7e>] show_trace+0x12e/0x150)
[<
0000000000115c40>] show_stack+0xa0/0x100
[<
00000000009b163c>] dump_stack+0x74/0xc8
[<
000000000017424a>] ___might_sleep+0x23a/0x248
[<
00000000002b58e8>] might_fault+0x70/0xe8
[<
0000000000264230>] map_lookup_elem+0x188/0x260
[<
0000000000264716>] SyS_bpf+0x20e/0x840
Fix it by allocating temporary buffer to store map element value.
Fixes: db20fd2b0108 ("bpf: add lookup/update/delete/iterate methods to BPF maps")
Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Thu, 22 Jan 2015 17:26:54 +0000 (18:26 +0100)]
net: sctp: fix slab corruption from use after free on INIT collisions
When hitting an INIT collision case during the 4WHS with AUTH enabled, as
already described in detail in commit
1be9a950c646 ("net: sctp: inherit
auth_capable on INIT collisions"), it can happen that we occasionally
still remotely trigger the following panic on server side which seems to
have been uncovered after the fix from commit
1be9a950c646 ...
[ 533.876389] BUG: unable to handle kernel paging request at
00000000ffffffff
[ 533.913657] IP: [<
ffffffff811ac385>] __kmalloc+0x95/0x230
[ 533.940559] PGD
5030f2067 PUD 0
[ 533.957104] Oops: 0000 [#1] SMP
[ 533.974283] Modules linked in: sctp mlx4_en [...]
[ 534.939704] Call Trace:
[ 534.951833] [<
ffffffff81294e30>] ? crypto_init_shash_ops+0x60/0xf0
[ 534.984213] [<
ffffffff81294e30>] crypto_init_shash_ops+0x60/0xf0
[ 535.015025] [<
ffffffff8128c8ed>] __crypto_alloc_tfm+0x6d/0x170
[ 535.045661] [<
ffffffff8128d12c>] crypto_alloc_base+0x4c/0xb0
[ 535.074593] [<
ffffffff8160bd42>] ? _raw_spin_lock_bh+0x12/0x50
[ 535.105239] [<
ffffffffa0418c11>] sctp_inet_listen+0x161/0x1e0 [sctp]
[ 535.138606] [<
ffffffff814e43bd>] SyS_listen+0x9d/0xb0
[ 535.166848] [<
ffffffff816149a9>] system_call_fastpath+0x16/0x1b
... or depending on the the application, for example this one:
[ 1370.026490] BUG: unable to handle kernel paging request at
00000000ffffffff
[ 1370.026506] IP: [<
ffffffff811ab455>] kmem_cache_alloc+0x75/0x1d0
[ 1370.054568] PGD
633c94067 PUD 0
[ 1370.070446] Oops: 0000 [#1] SMP
[ 1370.085010] Modules linked in: sctp kvm_amd kvm [...]
[ 1370.963431] Call Trace:
[ 1370.974632] [<
ffffffff8120f7cf>] ? SyS_epoll_ctl+0x53f/0x960
[ 1371.000863] [<
ffffffff8120f7cf>] SyS_epoll_ctl+0x53f/0x960
[ 1371.027154] [<
ffffffff812100d3>] ? anon_inode_getfile+0xd3/0x170
[ 1371.054679] [<
ffffffff811e3d67>] ? __alloc_fd+0xa7/0x130
[ 1371.080183] [<
ffffffff816149a9>] system_call_fastpath+0x16/0x1b
With slab debugging enabled, we can see that the poison has been overwritten:
[ 669.826368] BUG kmalloc-128 (Tainted: G W ): Poison overwritten
[ 669.826385] INFO: 0xffff880228b32e50-0xffff880228b32e50. First byte 0x6a instead of 0x6b
[ 669.826414] INFO: Allocated in sctp_auth_create_key+0x23/0x50 [sctp] age=3 cpu=0 pid=18494
[ 669.826424] __slab_alloc+0x4bf/0x566
[ 669.826433] __kmalloc+0x280/0x310
[ 669.826453] sctp_auth_create_key+0x23/0x50 [sctp]
[ 669.826471] sctp_auth_asoc_create_secret+0xcb/0x1e0 [sctp]
[ 669.826488] sctp_auth_asoc_init_active_key+0x68/0xa0 [sctp]
[ 669.826505] sctp_do_sm+0x29d/0x17c0 [sctp] [...]
[ 669.826629] INFO: Freed in kzfree+0x31/0x40 age=1 cpu=0 pid=18494
[ 669.826635] __slab_free+0x39/0x2a8
[ 669.826643] kfree+0x1d6/0x230
[ 669.826650] kzfree+0x31/0x40
[ 669.826666] sctp_auth_key_put+0x19/0x20 [sctp]
[ 669.826681] sctp_assoc_update+0x1ee/0x2d0 [sctp]
[ 669.826695] sctp_do_sm+0x674/0x17c0 [sctp]
Since this only triggers in some collision-cases with AUTH, the problem at
heart is that sctp_auth_key_put() on asoc->asoc_shared_key is called twice
when having refcnt 1, once directly in sctp_assoc_update() and yet again
from within sctp_auth_asoc_init_active_key() via sctp_assoc_update() on
the already kzfree'd memory, which is also consistent with the observation
of the poison decrease from 0x6b to 0x6a (note: the overwrite is detected
at a later point in time when poison is checked on new allocation).
Reference counting of auth keys revisited:
Shared keys for AUTH chunks are being stored in endpoints and associations
in endpoint_shared_keys list. On endpoint creation, a null key is being
added; on association creation, all endpoint shared keys are being cached
and thus cloned over to the association. struct sctp_shared_key only holds
a pointer to the actual key bytes, that is, struct sctp_auth_bytes which
keeps track of users internally through refcounting. Naturally, on assoc
or enpoint destruction, sctp_shared_key are being destroyed directly and
the reference on sctp_auth_bytes dropped.
User space can add keys to either list via setsockopt(2) through struct
sctp_authkey and by passing that to sctp_auth_set_key() which replaces or
adds a new auth key. There, sctp_auth_create_key() creates a new sctp_auth_bytes
with refcount 1 and in case of replacement drops the reference on the old
sctp_auth_bytes. A key can be set active from user space through setsockopt()
on the id via sctp_auth_set_active_key(), which iterates through either
endpoint_shared_keys and in case of an assoc, invokes (one of various places)
sctp_auth_asoc_init_active_key().
sctp_auth_asoc_init_active_key() computes the actual secret from local's
and peer's random, hmac and shared key parameters and returns a new key
directly as sctp_auth_bytes, that is asoc->asoc_shared_key, plus drops
the reference if there was a previous one. The secret, which where we
eventually double drop the ref comes from sctp_auth_asoc_set_secret() with
intitial refcount of 1, which also stays unchanged eventually in
sctp_assoc_update(). This key is later being used for crypto layer to
set the key for the hash in crypto_hash_setkey() from sctp_auth_calculate_hmac().
To close the loop: asoc->asoc_shared_key is freshly allocated secret
material and independant of the sctp_shared_key management keeping track
of only shared keys in endpoints and assocs. Hence, also commit
4184b2a79a76
("net: sctp: fix memory leak in auth key management") is independant of
this bug here since it concerns a different layer (though same structures
being used eventually). asoc->asoc_shared_key is reference dropped correctly
on assoc destruction in sctp_association_free() and when active keys are
being replaced in sctp_auth_asoc_init_active_key(), it always has a refcount
of 1. Hence, it's freed prematurely in sctp_assoc_update(). Simple fix is
to remove that sctp_auth_key_put() from there which fixes these panics.
Fixes: 730fc3d05cd4 ("[SCTP]: Implete SCTP-AUTH parameter processing")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 27 Jan 2015 00:25:42 +0000 (16:25 -0800)]
Merge branch 'akpm' (patches from Andrew Morton)
Merge misc fixes from Andrew Morton:
"Six fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
drivers/rtc/rtc-s5m.c: terminate s5m_rtc_id array with empty element
printk: add dummy routine for when CONFIG_PRINTK=n
mm/vmscan: fix highidx argument type
memcg: remove extra newlines from memcg oom kill log
x86, build: replace Perl script with Shell script
mm: page_alloc: embed OOM killing naturally into allocation slowpath
Ezequiel Garcia [Thu, 22 Jan 2015 14:33:02 +0000 (11:33 -0300)]
net: mv643xx_eth: Fix highmem support in non-TSO egress path
Commit
69ad0dd7af22b61d9e0e68e56b6290121618b0fb
Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Mon May 19 13:59:59 2014 -0300
net: mv643xx_eth: Use dma_map_single() to map the skb fragments
caused a nasty regression by removing the support for highmem skb
fragments. By using page_address() to get the address of a fragment's
page, we are assuming a lowmem page. However, such assumption is incorrect,
as fragments can be in highmem pages, resulting in very nasty issues.
This commit fixes this by using the skb_frag_dma_map() helper,
which takes care of mapping the skb fragment properly. Additionally,
the type of mapping is now tracked, so it can be unmapped using
dma_unmap_page or dma_unmap_single when appropriate.
This commit also fixes the error path in txq_init() to release the
resources properly.
Fixes: 69ad0dd7af22 ("net: mv643xx_eth: Use dma_map_single() to map the skb fragments")
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 27 Jan 2015 00:13:20 +0000 (16:13 -0800)]
Merge branch 'sh_eth'
Ben Hutchings says:
====================
Fixes for sh_eth #2
I'm continuing review and testing of Ethernet support on the R-Car H2
chip. This series fixes more of the issues I've found, but it won't be
the last set.
These are not tested on any of the other supported chips.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 22 Jan 2015 12:44:08 +0000 (12:44 +0000)]
sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers
In order to stop the RX path accessing the RX ring while it's being
stopped or resized, we clear the interrupt mask (EESIPR) and then call
free_irq() or synchronise_irq(). This is insufficient because the
interrupt handler or NAPI poller may set EESIPR again after we clear
it. Also, in sh_eth_set_ringparam() we currently don't disable NAPI
polling at all.
I could easily trigger a crash by running the loop:
while ethtool -G eth0 rx 128 && ethtool -G eth0 rx 64; do echo -n .; done
and 'ping -f' toward the sh_eth port from another machine.
To fix this:
- Add a software flag (irq_enabled) to signal whether interrupts
should be enabled
- In the interrupt handler, if the flag is clear then clear EESIPR
and return
- In the NAPI poller, if the flag is clear then don't set EESIPR
- Set the flag before enabling interrupts in sh_eth_dev_init() and
sh_eth_set_ringparam()
- Clear the flag and serialise with the interrupt and NAPI
handlers before clearing EESIPR in sh_eth_close() and
sh_eth_set_ringparam()
After this, I could run the loop for 100,000 iterations successfully.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 22 Jan 2015 12:41:34 +0000 (12:41 +0000)]
sh_eth: Fix crash or memory leak when resizing rings on device that is down
If the device is down then no packet buffers should be allocated.
We also must not touch its registers as it may be powered off.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 22 Jan 2015 12:40:25 +0000 (12:40 +0000)]
sh_eth: Detach net device when stopping queue to resize DMA rings
We must only ever stop TX queues when they are full or the net device
is not 'ready' so far as the net core, and specifically the watchdog,
is concerned. Otherwise, the watchdog may fire *immediately* if no
packets have been added to the queue in the last 5 seconds.
What's more, sh_eth_tx_timeout() will likely crash if called while
we're resizing the TX ring.
I could easily trigger this by running the loop:
while ethtool -G eth0 rx 128 && ethtool -G eth0 rx 64; do echo -n .; done
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 22 Jan 2015 12:40:13 +0000 (12:40 +0000)]
sh_eth: Fix padding of short frames on TX
If an skb to be transmitted is shorter than the minimum Ethernet frame
length, we currently set the DMA descriptor length to the minimum but
do not add zero-padding. This could result in leaking sensitive
data. We also pass different lengths to dma_map_single() and
dma_unmap_single().
Use skb_padto() to pad properly, before calling dma_map_single().
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Thu, 22 Jan 2015 09:49:22 +0000 (15:19 +0530)]
drivers: net: cpsw: discard dual emac default vlan configuration
In Dual EMAC, the default VLANs are used to segregate Rx packets between
the ports, so adding the same default VLAN to the switch will affect the
normal packet transfers. So returning error on addition of dual EMAC
default VLANs.
Even if EMAC 0 default port VLAN is added to EMAC 1, it will lead to
break dual EMAC port separations.
Fixes: d9ba8f9e6298 (driver: net: ethernet: cpsw: dual emac interface implementation)
Cc: <stable@vger.kernel.org> # v3.9+
Reported-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 26 Jan 2015 23:50:24 +0000 (15:50 -0800)]
Merge branch 'cls_bpf'
Daniel Borkmann says:
====================
Two cls_bpf fixes
Found them while doing a review on act_bpf and going over the
cls_bpf code again. Will also address the first issue in act_bpf
as it needs to be fixed there, too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Thu, 22 Jan 2015 09:41:02 +0000 (10:41 +0100)]
net: cls_bpf: fix auto generation of per list handles
When creating a bpf classifier in tc with priority collisions and
invoking automatic unique handle assignment, cls_bpf_grab_new_handle()
will return a wrong handle id which in fact is non-unique. Usually
altering of specific filters is being addressed over major id, but
in case of collisions we result in a filter chain, where handle ids
address individual cls_bpf_progs inside the classifier.
Issue is, in cls_bpf_grab_new_handle() we probe for head->hgen handle
in cls_bpf_get() and in case we found a free handle, we're supposed
to use exactly head->hgen. In case of insufficient numbers of handles,
we bail out later as handle id 0 is not allowed.
Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Thu, 22 Jan 2015 09:41:01 +0000 (10:41 +0100)]
net: cls_bpf: fix size mismatch on filter preparation
In cls_bpf_modify_existing(), we read out the number of filter blocks,
do some sanity checks, allocate a block on that size, and copy over the
BPF instruction blob from user space, then pass everything through the
classic BPF checker prior to installation of the classifier.
We should reject mismatches here, there are 2 scenarios: the number of
filter blocks could be smaller than the provided instruction blob, so
we do a partial copy of the BPF program, and thus the instructions will
either be rejected from the verifier or a valid BPF program will be run;
in the other case, we'll end up copying more than we're supposed to,
and most likely the trailing garbage will be rejected by the verifier
as well (i.e. we need to fit instruction pattern, ret {A,K} needs to be
last instruction, load/stores must be correct, etc); in case not, we
would leak memory when dumping back instruction patterns. The code should
have only used nla_len() as Dave noted to avoid this from the beginning.
Anyway, lets fix it by rejecting such load attempts.
Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 26 Jan 2015 23:24:14 +0000 (15:24 -0800)]
Merge tag 'linux-can-fixes-for-3.19-
20150121' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2015-01-21
this is a pull request for v3.19, net/master, which consists of a single patch.
Viktor Babrian fixes the issue in the c_can dirver, that the CAN interface
might continue to send frames after the interface has been shut down.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 26 Jan 2015 23:17:34 +0000 (15:17 -0800)]
Merge branch 'for-3.19-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"The lifetime rules of cgroup hierarchies always have been somewhat
counter-intuitive and cgroup core tried to enforce that hierarchies
w/o userland-visible usages must die in finite amount of time so that
the controllers can be reused for other hierarchies; unfortunately,
this can't be implemented reasonably for the memory controller - the
kmemcg part doesn't have any way to forcefully drain the existing
usages, leading to an interruptible hang if a following mount attempts
to use the controller in any way.
So, it seems like we're stuck with "hierarchies live on till they die
whenever that may be" at least for now. This pretty much confines
attaching controllers to hierarchies to before the hierarchies are
actively used by making dynamic configurations post active usages
unreliable. This has never been reliable and should be fine in
practice given how cgroups are used.
After the patch, hierarchies aren't killed if it isn't already
drained. A following mount attempt of the same mount options will
reuse the existing hierarchy. Mount attempts with differing options
will fail w/ -EBUSY"
* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: prevent mount hang due to memory controller lifetime
Linus Torvalds [Mon, 26 Jan 2015 22:52:08 +0000 (14:52 -0800)]
Merge tag 'regulator-v3.19-rc6' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"One correctness fix here for the s2mps11 driver which would have
resulted in some of the regulators being completely broken together
with a fix for locking in regualtor_put() (which is fortunately rarely
called at all in practical systems)"
* tag 'regulator-v3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: s2mps11: Fix wrong calculation of register offset
regulator: core: fix race condition in regulator_put()
Linus Torvalds [Mon, 26 Jan 2015 22:51:19 +0000 (14:51 -0800)]
Merge tag 'spi-v3.19-rc6' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes here, some fixes for issues introduced and
discovered during recent work on the DesignWare driver (which has been
getting a lot of attention recently) and a couple of other drivers.
All serious things for people who run into them"
* tag 'spi-v3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dw: amend warning message
spi: sh-msiof: fix MDR1_FLD_MASK value
spi: dw-mid: fix FIFO size
spi: dw: Fix detecting FIFO depth
spi/pxa2xx: Clear cur_chip pointer before starting next message
Andrey Ryabinin [Mon, 26 Jan 2015 20:58:46 +0000 (12:58 -0800)]
drivers/rtc/rtc-s5m.c: terminate s5m_rtc_id array with empty element
Array of platform_device_id elements should be terminated with empty
element.
Fixes: 5bccae6ec458 ("rtc: s5m-rtc: add real-time clock driver for s5m8767")
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pranith Kumar [Mon, 26 Jan 2015 20:58:43 +0000 (12:58 -0800)]
printk: add dummy routine for when CONFIG_PRINTK=n
There are missing dummy routines for log_buf_addr_get() and
log_buf_len_get() for when CONFIG_PRINTK is not set causing build
failures.
This patch adds these dummy routines at the appropriate location.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael S. Tsirkin [Mon, 26 Jan 2015 20:58:41 +0000 (12:58 -0800)]
mm/vmscan: fix highidx argument type
for_each_zone_zonelist_nodemask wants an enum zone_type argument, but is
passed gfp_t:
mm/vmscan.c:2658:9: expected int enum zone_type [signed] highest_zoneidx
mm/vmscan.c:2658:9: got restricted gfp_t [usertype] gfp_mask
mm/vmscan.c:2658:9: warning: incorrect type in argument 2 (different base types)
mm/vmscan.c:2658:9: expected int enum zone_type [signed] highest_zoneidx
mm/vmscan.c:2658:9: got restricted gfp_t [usertype] gfp_mask
convert argument to the correct type.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Thelen [Mon, 26 Jan 2015 20:58:38 +0000 (12:58 -0800)]
memcg: remove extra newlines from memcg oom kill log
Commit
e61734c55c24 ("cgroup: remove cgroup->name") added two extra
newlines to memcg oom kill log messages. This makes dmesg hard to read
and parse. The issue affects 3.15+.
Example:
Task in /t <<< extra #1
killed as a result of limit of /t
<<< extra #2
memory: usage 102400kB, limit 102400kB, failcnt 274712
Remove the extra newlines from memcg oom kill messages, so the messages
look like:
Task in /t killed as a result of limit of /t
memory: usage 102400kB, limit 102400kB, failcnt 240649
Fixes: e61734c55c24 ("cgroup: remove cgroup->name")
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Mon, 26 Jan 2015 20:58:35 +0000 (12:58 -0800)]
x86, build: replace Perl script with Shell script
Commit
e6023367d779 ("x86, kaslr: Prevent .bss from overlaping initrd")
added Perl to the required build environment. This reimplements in
shell the Perl script used to find the size of the kernel with bss and
brk added.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Rob Landley <rob@landley.net>
Acked-by: Rob Landley <rob@landley.net>
Cc: Anca Emanuel <anca.emanuel@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Mon, 26 Jan 2015 20:58:32 +0000 (12:58 -0800)]
mm: page_alloc: embed OOM killing naturally into allocation slowpath
The OOM killing invocation does a lot of duplicative checks against the
task's allocation context. Rework it to take advantage of the existing
checks in the allocator slowpath.
The OOM killer is invoked when the allocator is unable to reclaim any
pages but the allocation has to keep looping. Instead of having a check
for __GFP_NORETRY hidden in oom_gfp_allowed(), just move the OOM
invocation to the true branch of should_alloc_retry(). The __GFP_FS
check from oom_gfp_allowed() can then be moved into the OOM avoidance
branch in __alloc_pages_may_oom(), along with the PF_DUMPCORE test.
__alloc_pages_may_oom() can then signal to the caller whether the OOM
killer was invoked, instead of requiring it to duplicate the order and
high_zoneidx checks to guess this when deciding whether to continue.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Brown [Mon, 26 Jan 2015 11:16:27 +0000 (11:16 +0000)]
Merge remote-tracking branches 'spi/fix/dw', 'spi/fix/msiof' and 'spi/fix/pxa2xx' into spi-linus
David S. Miller [Mon, 26 Jan 2015 07:38:20 +0000 (23:38 -0800)]
Merge branch 's390'
Ursula Braun says:
====================
s390/qeth patches for net
here are two s390/qeth patches built for net.
One patch is quite large, but we would like to fix the locking warning
seen in recent kernels as soon as possible. But if you want me to submit
these patches for net-next, I will do.
Or Gerlitz says:
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Richter [Wed, 21 Jan 2015 12:39:10 +0000 (13:39 +0100)]
390/qeth: Fix locking warning during qeth device setup
Do not wait for channel command buffers in IPA commands.
The potential wait could be done while holding a spin lock and causes
in recent kernels such a bug if kernel lock debugging is enabled:
kernel: BUG: sleeping function called from invalid context at drivers/s390/net/qeth_core_main.c:
794
kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 2031, name: NetworkManager
kernel: 2 locks held by NetworkManager/2031:
kernel: #0: (rtnl_mutex){+.+.+.}, at: [<
00000000006e0d7a>] rtnetlink_rcv+0x32/0x50
kernel: #1: (_xmit_ETHER){+.....}, at: [<
00000000006cfe90>] dev_set_rx_mode+0x30/0x50
kernel: CPU: 0 PID: 2031 Comm: NetworkManager Not tainted 3.18.0-rc5-next-
20141124 #1
kernel:
00000000275fb1f0 00000000275fb280 0000000000000002 0000000000000000
00000000275fb320 00000000275fb298 00000000275fb298 00000000007e326a
0000000000000000 000000000099ce2c 00000000009b4988 000000000000000b
00000000275fb2e0 00000000275fb280 0000000000000000 0000000000000000
0000000000000000 00000000001129c8 00000000275fb280 00000000275fb2e0
kernel: Call Trace:
kernel: ([<
00000000001128b0>] show_trace+0xf8/0x158)
kernel: [<
000000000011297a>] show_stack+0x6a/0xe8
kernel: [<
00000000007e995a>] dump_stack+0x82/0xb0
kernel: [<
000000000017d668>] ___might_sleep+0x170/0x228
kernel: [<
000003ff80026f0e>] qeth_wait_for_buffer+0x36/0xd0 [qeth]
kernel: [<
000003ff80026fe2>] qeth_get_ipacmd_buffer+0x3a/0xc0 [qeth]
kernel: [<
000003ff80105078>] qeth_l3_send_setdelmc+0x58/0xf8 [qeth_l3]
kernel: [<
000003ff8010b1fe>] qeth_l3_set_ip_addr_list+0x2c6/0x848 [qeth_l3]
kernel: [<
000003ff8010bbb4>] qeth_l3_set_multicast_list+0x434/0xc48 [qeth_l3]
kernel: [<
00000000006cfe9a>] dev_set_rx_mode+0x3a/0x50
kernel: [<
00000000006cff90>] __dev_open+0xe0/0x140
kernel: [<
00000000006d02a0>] __dev_change_flags+0xa0/0x178
kernel: [<
00000000006d03a8>] dev_change_flags+0x30/0x70
kernel: [<
00000000006e14ee>] do_setlink+0x346/0x9a0
...
The device driver has plenty of command buffers available
per channel for channel command communication.
In the extremely rare case when there is no command buffer
available, return a NULL pointer and issue a warning
in the kernel log. The caller handles the case when
a NULL pointer is encountered and returns an error.
In the case the wait for command buffer is possible
(because no lock is held as in the OSN case), still wait
until a channel command buffer is available.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Crosser [Wed, 21 Jan 2015 12:39:09 +0000 (13:39 +0100)]
qeth: clean up error handling
In the functions that are registering and unregistering MAC
addresses in the qeth-handled hardware, remove callback functions
that are unnesessary, as only the return code is analyzed.
Translate hardware response codes to semi-standard 'errno'-like
codes for readability.
Add kernel-doc description to the internal API function
qeth_send_control_data().
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau [Wed, 21 Jan 2015 03:16:02 +0000 (19:16 -0800)]
ipv6: Fix __ip6_route_redirect
In my last commit (
a3c00e4: ipv6: Remove BACKTRACK macro), the changes in
__ip6_route_redirect is incorrect. The following case is missed:
1. The for loop tries to find a valid gateway rt. If it fails to find
one, rt will be NULL.
2. When rt is NULL, it is set to the ip6_null_entry.
3. The newly added 'else if', from
a3c00e4, will stop the backtrack from
happening.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 26 Jan 2015 04:04:41 +0000 (20:04 -0800)]
Linux 3.19-rc6
Linus Torvalds [Mon, 26 Jan 2015 02:11:17 +0000 (18:11 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Hopefully the last round of fixes for 3.19
- regression fix for the LDT changes
- regression fix for XEN interrupt handling caused by the APIC
changes
- regression fixes for the PAT changes
- last minute fixes for new the MPX support
- regression fix for 32bit UP
- fix for a long standing relocation issue on 64bit tagged for stable
- functional fix for the Hyper-V clocksource tagged for stable
- downgrade of a pr_err which tends to confuse users
Looks a bit on the large side, but almost half of it are valuable
comments"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Change Fast TSC calibration failed from error to info
x86/apic: Re-enable PCI_MSI support for non-SMP X86_32
x86, mm: Change cachemode exports to non-gpl
x86, tls: Interpret an all-zero struct user_desc as "no segment"
x86, tls, ldt: Stop checking lm in LDT_empty
x86, mpx: Strictly enforce empty prctl() args
x86, mpx: Fix potential performance issue on unmaps
x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels
x86, hyperv: Mark the Hyper-V clocksource as being continuous
x86: Don't rely on VMWare emulating PAT MSR correctly
x86, irq: Properly tag virtualization entry in /proc/interrupts
x86, boot: Skip relocs when load address unchanged
x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi
ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable()
x86/xen: Treat SCI interrupt as normal GSI interrupt
Linus Torvalds [Mon, 26 Jan 2015 02:07:01 +0000 (18:07 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"From the irqchip departement you get:
- regression fix for omap-intc
- regression fix for atmel-aic-common
- functional correctness fix for hip04
- type mismatch fix for gic-v3-its
- proper error pointer check for mtd-sysirq
Mostly one and two liners except for the omap regression fix which is
slightly larger than desired"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type
irqchip: omap-intc: Fix legacy DMA regression
irqchip: gic-v3-its: Fix use of max with decimal constant
irqchip: hip04: Initialize hip04_cpu_map to 0xffff
irqchip: mtk-sysirq: Use IS_ERR() instead of NULL pointer check
Linus Torvalds [Mon, 26 Jan 2015 01:47:34 +0000 (17:47 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- regression fix for exynos_mct clocksource
- trivial build fix for kona clocksource
- functional one liner fix for the sh_tmu clocksource
- two validation fixes to prevent (root only) data corruption in the
kernel via settimeofday and adjtimex. Tagged for stable"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: adjtimex: Validate the ADJ_FREQUENCY values
time: settimeofday: Validate the values of tv from user
clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast
clocksource: kona: fix __iomem annotation
clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
Linus Torvalds [Mon, 26 Jan 2015 01:29:06 +0000 (17:29 -0800)]
Merge tag 'armsoc-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A week's worth of fixes for various ARM platforms. Diff wise, the
largest fix is for OMAP to deal with how GIC now registers interrupts
(irq_domain_add_legacy() -> irq_domain_add_linear() changes).
Besides this, a few more renesas platforms needed the GIC instatiation
done for legacy boards. There's also a fix that disables coherency of
mvebu due to issues, and a few other smaller fixes"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: add baud rate to Juno stdout-path
ARM: dts: imx25: Fix PWM "per" clocks
bus: mvebu-mbus: fix support of MBus window 13
Merge tag 'mvebu-fixes-3.19-3' of git://git.infradead.org/linux-mvebu into fixes
ARM: mvebu: completely disable hardware I/O coherency
ARM: OMAP: Work around hardcoded interrupts
ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
arm: boot: dts: dra7: enable dwc3 suspend PHY quirk
Linus Torvalds [Mon, 26 Jan 2015 01:27:18 +0000 (17:27 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes - deadlock in CIFS and build breakage in cris serial
driver (resurfaced f_dentry in there)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Convert file->f_dentry->d_inode to file_inode()
fix deadlock in cifs_ioctl_clone()
Linus Torvalds [Mon, 26 Jan 2015 01:25:01 +0000 (17:25 -0800)]
Merge tag 'dm-3.19-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Two stable fixes for dm-cache and one 3.19 DM core fix:
- fix potential for dm-cache metadata corruption via stale metadata
buffers being used when switching an inactive cache table to
active; this could occur due to each table having it's own bufio
client rather than sharing the client between tables.
- fix dm-cache target to properly account for discard IO while
suspending otherwise IO quiescing could complete prematurely.
- fix DM core's handling of multiple internal suspends by maintaining
an 'internal_suspend_count' and only resuming the device when this
count drops to zero"
* tag 'dm-3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix handling of multiple internal suspends
dm cache: fix problematic dual use of a single migration count variable
dm cache: share cache-metadata object across inactive and active DM tables
Linus Torvalds [Mon, 26 Jan 2015 01:23:34 +0000 (17:23 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull two block layer fixes from Jens Axboe:
"Two small patches that should make it into 3.19:
- a fixup from me for NVMe, making the cq_vector a signed variable.
Otherwise our -1 comparison fails, and commit
2b25d981790b doesn't
do what it was supposed to.
- a fixup for the hotplug handling for blk-mq from Ming Lei, using
the proper kobject referencing to ensure we release resources at
the right time"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: fix hctx/ctx kobject use-after-free
NVMe: cq_vector should be signed
Vivien Didelot [Wed, 21 Jan 2015 00:13:32 +0000 (19:13 -0500)]
net: dsa: set slave MII bus PHY mask
When registering a mdio bus, Linux assumes than every port has a PHY and tries
to scan it. If a switch port has no PHY registered, DSA will fail to register
the slave MII bus. To fix this, set the slave MII bus PHY mask to the switch
PHYs mask.
As an example, if we use a Marvell MV88E6352 (which is a 7-port switch with no
registered PHYs for port 5 and port 6), with the following declared names:
static struct dsa_chip_data switch_cdata = {
[...]
.port_names[0] = "sw0",
.port_names[1] = "sw1",
.port_names[2] = "sw2",
.port_names[3] = "sw3",
.port_names[4] = "sw4",
.port_names[5] = "cpu",
};
DSA will fail to create the switch instance. With the PHY mask set for the
slave MII bus, only the PHY for ports 0-4 will be scanned and the instance will
be successfully created.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Sun, 25 Jan 2015 05:53:43 +0000 (21:53 -0800)]
ipvlan: fix incorrect usage of IS_ERR() macro in IPv6 code path.
The ip6_route_output() always returns a valid dst pointer unlike in IPv4
case. So the validation has to be different from the IPv4 path. Correcting
that error in this patch.
This was picked up by a static checker with a following warning -
drivers/net/ipvlan/ipvlan_core.c:380 ipvlan_process_v6_outbound()
warn: 'dst' isn't an ERR_PTR
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Levin [Sat, 24 Jan 2015 01:47:00 +0000 (20:47 -0500)]
net: llc: use correct size for sysctl timeout entries
The timeout entries are sizeof(int) rather than sizeof(long), which
means that when they were getting read we'd also leak kernel memory
to userspace along with the timeout values.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 22 Jan 2015 15:56:18 +0000 (07:56 -0800)]
netxen: fix netxen_nic_poll() logic
NAPI poll logic now enforces that a poller returns exactly the budget
when it wants to be called again.
If a driver limits TX completion, it has to return budget as well when
the limit is hit, not the number of received packets.
Reported-and-tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: d75b1ade567f ("net: less interrupt masking in NAPI")
Cc: Manish Chopra <manish.chopra@qlogic.com>
Acked-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Govindarajulu Varadarajan [Tue, 20 Jan 2015 13:16:15 +0000 (18:46 +0530)]
enic: fix rx napi poll return value
With the commit
d75b1ade567ffab ("net: less interrupt masking in NAPI") napi repoll
is done only when work_done == budget. When we are in busy_poll we return 0 in
napi_poll. We should return budget.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 25 Jan 2015 05:55:26 +0000 (21:55 -0800)]
Merge tag 'wireless-drivers-for-davem-2015-01-20' of git://git./linux/kernel/git/kvalo/wireless-drivers
ath9k:
* fix an IRQ storm caused by commit
872b5d814f99
iwlwifi:
* A fix for scan that fixes a firmware assertion
* A fix that improves roaming behavior. Same fix has been tested for
a while in iwldvm. This is a bit of a work around, but the real fix
should be in mac80211 and will come later.
* A fix for BARs that avoids a WARNING.
* one fix for rfkill while scheduled scan is running.
Linus's system hit this issue. WiFi would be unavailable
after this has happpened because of bad state in cfg80211.
Signed-off-by: David S. Miller <davem@davemloft.net>
Nimrod Andy [Tue, 20 Jan 2015 08:48:17 +0000 (16:48 +0800)]
ARM: dts: imx6sx: correct i.MX6sx sdb board enet phy address
The commit (
3d125f9c91c5) cause i.MX6SX sdb enet cannot work. The cause is
the commit add mdio node with un-correct phy address.
The patch just correct i.MX6sx sdb board enet phy address.
V2:
* As Shawn's suggestion that unit-address should match 'reg' property, so
update ethernet-phy unit-address.
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 24 Jan 2015 22:52:30 +0000 (14:52 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
pULL SCSI fixes from James Bottomley:
"This consists of four real fixes and three MAINTAINER updates.
Three of the fixes are obvious (the DIX and atomic allocation are bug
on and warn on fixes and the other is just trivial) and the ipr one is
a bit more involved but is required because without it, the card
double completes aborted commands and causes a kernel oops"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
MAINTAINERS: ibmvscsi driver maintainer change
MAINTAINERS: ibmvfc driver maintainer change
MAINTAINERS: Remove self as isci maintainer
scsi_debug: test always evaluates to false, || should be used instead
scsi: Avoid crashing if device uses DIX but adapter does not support it
scsi_debug: use atomic allocation in resp_rsup_opcodes
ipr: wait for aborted command responses
Linus Torvalds [Sat, 24 Jan 2015 22:47:24 +0000 (14:47 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
"This will fix reboot issues with the imx2_wdt driver and it also drops
some forgotten owner assignments from platform_drivers"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: drop owner assignment from platform_drivers
watchdog: imx2_wdt: Disable power down counter on boot
watchdog: imx2_wdt: Improve power management support.
Linus Torvalds [Sat, 24 Jan 2015 22:37:31 +0000 (14:37 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
Pull hwmon update from Jean Delvare:
"This contains a single thing: a new driver for the temperature sensor
embedded in the Intel 5500/5520/X58 chipsets.
Sorry for the late request, it's been so long since I last sent a pull
request and I've been so busy with other tasks meanwhile that I simply
forgot about these patches. But given that this is a new driver, it
can't introduce any regression so I thought it could still be OK.
This has been in linux-next for months now"
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro
hwmon: (i5500_temp) Convert to module_pci_driver
hwmon: (i5500_temp) Don't bind to disabled sensors
hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups
hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets
Linus Torvalds [Sat, 24 Jan 2015 22:34:54 +0000 (14:34 -0800)]
Merge tag 'media/v3.19-4' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix some race conditions caused by a regression on videobuf2
- fix a interrupt release bug on cx23885
- fix support for Mygica T230 and HVR4400
- fix compilation breakage when USB is not selected on tlg2300
- fix capabilities report on ompa3isp, soc-camera, rcar_vin and
pvrusb2
* tag 'media/v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] omap3isp: Correctly set QUERYCAP capabilities
[media] cx23885: fix free interrupt bug
[media] pvrusb2: fix missing device_caps in querycap
[media] vb2: fix vb2_thread_stop race conditions
[media] rcar_vin: Update device_caps and capabilities in querycap
[media] soc-camera: fix device capabilities in multiple camera host drivers
[media] Fix Mygica T230 support
[media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry
[media] tlg2300: Fix media dependencies
Mikulas Patocka [Thu, 8 Jan 2015 23:52:26 +0000 (18:52 -0500)]
dm: fix handling of multiple internal suspends
Commit
ffcc393641 ("dm: enhance internal suspend and resume interface")
attempted to handle multiple internal suspends on the same device, but
it did that incorrectly. When these functions are called in this order
on the same device the device is no longer suspended, but it should be:
dm_internal_suspend_noflush
dm_internal_suspend_noflush
dm_internal_resume
Fix this bug by maintaining an 'internal_suspend_count' and resuming
the device when this count drops to zero.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Axel Lin [Sat, 24 Jan 2015 13:16:22 +0000 (14:16 +0100)]
hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro
Use ATTRIBUTE_GROUPS macro to simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Axel Lin [Sat, 24 Jan 2015 13:16:22 +0000 (14:16 +0100)]
hwmon: (i5500_temp) Convert to module_pci_driver
Use module_pci_driver to simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Jean Delvare [Sat, 24 Jan 2015 13:16:21 +0000 (14:16 +0100)]
hwmon: (i5500_temp) Don't bind to disabled sensors
On many motherboards, for an unknown reason, the thermal sensor seems
to be disabled and will return a constant temperature value of 36.5
degrees Celsius. Don't bind to the device in that case, so that we
don't report this bogus value to userspace.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Romain Dolbeau <romain@dolbeau.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Jean Delvare [Sat, 24 Jan 2015 13:16:21 +0000 (14:16 +0100)]
hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups
Use devm_hwmon_device_register_with_groups() to simplify the code a
bit.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Romain Dolbeau <romain@dolbeau.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Jean Delvare [Sat, 24 Jan 2015 13:16:21 +0000 (14:16 +0100)]
hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets
The Intel 5500, 5520 and X58 chipsets embed a digital thermal sensor.
This new driver supports it.
Note that on many boards the sensor seems to be disabled and reports
the minimum value (36.5 degrees Celsius) all the time.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Romain Dolbeau <romain@dolbeau.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Lendacky, Thomas [Tue, 20 Jan 2015 18:20:31 +0000 (12:20 -0600)]
amd-xgbe: Use proper Rx flow control register
Updated hardware documention shows the Rx flow control settings were
moved from the Rx queue operation mode register to a new Rx queue flow
control register. The old flow control settings are now reserved areas
of the Rx queue operation mode register. Update the code to use the new
register.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 24 Jan 2015 02:31:27 +0000 (14:31 +1200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"We have a few fixes in my for-linus branch.
Qu Wenruo's batch fix a regression between some our merge window pull
and the inode_cache feature. The rest are smaller bugs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: Don't call btrfs_start_transaction() on frozen fs to avoid deadlock.
btrfs: Fix the bug that fs_info->pending_changes is never cleared.
btrfs: fix state->private cast on 32 bit machines
Btrfs: fix race deleting block group from space_info->ro_bgs list
Btrfs: fix incorrect freeing in scrub_stripe
btrfs: sync ioctl, handle errors after transaction start
Linus Torvalds [Fri, 23 Jan 2015 23:26:13 +0000 (11:26 +1200)]
Merge tag 'platform-drivers-x86-v3.19-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull platform driver fix from Darren Hart:
"Revert keyboard backlight sysfs support and documentation.
The support for the dell-laptop keyboard backlight was flawed and the
fix:
https://lkml.org/lkml/2015/1/14/539
was more invasive that I felt comfortable sending at RC5.
This series reverts the support for the dell-laptop keyboard backlight
as well as the documentation for the newly created sysfs attributes.
We'll get this implemented correctly for 3.20"
* tag 'platform-drivers-x86-v3.19-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
Revert "platform: x86: dell-laptop: Add support for keyboard backlight"
Revert "Documentation: Add entry for dell-laptop sysfs interface"
This page took 0.058093 seconds and 5 git commands to generate.