Masami Hiramatsu [Mon, 5 Mar 2012 13:32:22 +0000 (22:32 +0900)]
x86/kprobes: Split out optprobe related code to kprobes-opt.c
Split out optprobe related code to arch/x86/kernel/kprobes-opt.c
for maintenanceability.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: systemtap@sourceware.org
Cc: anderson@redhat.com
Link: http://lkml.kernel.org/r/20120305133222.5982.54794.stgit@localhost.localdomain
[ Tidied up the code a tiny bit ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Masami Hiramatsu [Mon, 5 Mar 2012 13:32:16 +0000 (22:32 +0900)]
x86/kprobes: Fix a bug which can modify kernel code permanently
Fix a bug in kprobes which can modify kernel code
permanently at run-time. In the result, kernel can
crash when it executes the modified code.
This bug can happen when we put two probes enough near
and the first probe is optimized. When the second probe
is set up, it copies a byte which is already modified
by the first probe, and executes it when the probe is hit.
Even worse, the first probe and the second probe are removed
respectively, the second probe writes back the copied
(modified) instruction.
To fix this bug, kprobes always recovers the original
code and copies the first byte from recovered instruction.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: systemtap@sourceware.org
Cc: anderson@redhat.com
Link: http://lkml.kernel.org/r/20120305133215.5982.31991.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Masami Hiramatsu [Mon, 5 Mar 2012 13:32:09 +0000 (22:32 +0900)]
x86/kprobes: Fix instruction recovery on optimized path
Current probed-instruction recovery expects that only breakpoint
instruction modifies instruction. However, since kprobes jump
optimization can replace original instructions with a jump,
that expectation is not enough. And it may cause instruction
decoding failure on the function where an optimized probe
already exists.
This bug can reproduce easily as below:
1) find a target function address (any kprobe-able function is OK)
$ grep __secure_computing /proc/kallsyms
ffffffff810c19d0 T __secure_computing
2) decode the function
$ objdump -d vmlinux --start-address=0xffffffff810c19d0 --stop-address=0xffffffff810c19eb
vmlinux: file format elf64-x86-64
Disassembly of section .text:
ffffffff810c19d0 <__secure_computing>:
ffffffff810c19d0: 55 push %rbp
ffffffff810c19d1: 48 89 e5 mov %rsp,%rbp
ffffffff810c19d4: e8 67 8f 72 00 callq
ffffffff817ea940 <mcount>
ffffffff810c19d9: 65 48 8b 04 25 40 b8 mov %gs:0xb840,%rax
ffffffff810c19e0: 00 00
ffffffff810c19e2: 83 b8 88 05 00 00 01 cmpl $0x1,0x588(%rax)
ffffffff810c19e9: 74 05 je
ffffffff810c19f0 <__secure_computing+0x20>
3) put a kprobe-event at an optimize-able place, where no
call/jump places within the 5 bytes.
$ su -
# cd /sys/kernel/debug/tracing
# echo p __secure_computing+0x9 > kprobe_events
4) enable it and check it is optimized.
# echo 1 > events/kprobes/p___secure_computing_9/enable
# cat ../kprobes/list
ffffffff810c19d9 k __secure_computing+0x9 [OPTIMIZED]
5) put another kprobe on an instruction after previous probe in
the same function.
# echo p __secure_computing+0x12 >> kprobe_events
bash: echo: write error: Invalid argument
# dmesg | tail -n 1
[ 1666.500016] Probing address(0xffffffff810c19e2) is not an instruction boundary.
6) however, if the kprobes optimization is disabled, it works.
# echo 0 > /proc/sys/debug/kprobes-optimization
# cat ../kprobes/list
ffffffff810c19d9 k __secure_computing+0x9
# echo p __secure_computing+0x12 >> kprobe_events
(no error)
This is because kprobes doesn't recover the instruction
which is overwritten with a relative jump by another kprobe
when finding instruction boundary.
It only recovers the breakpoint instruction.
This patch fixes kprobes to recover such instructions.
With this fix:
# echo p __secure_computing+0x9 > kprobe_events
# echo 1 > events/kprobes/p___secure_computing_9/enable
# cat ../kprobes/list
ffffffff810c1aa9 k __secure_computing+0x9 [OPTIMIZED]
# echo p __secure_computing+0x12 >> kprobe_events
# cat ../kprobes/list
ffffffff810c1aa9 k __secure_computing+0x9 [OPTIMIZED]
ffffffff810c1ab2 k __secure_computing+0x12 [DISABLED]
Changes in v4:
- Fix a bug to ensure optimized probe is really optimized
by jump.
- Remove kprobe_optready() dependency.
- Cleanup code for preparing optprobe separation.
Changes in v3:
- Fix a build error when CONFIG_OPTPROBE=n. (Thanks, Ingo!)
To fix the error, split optprobe instruction recovering
path from kprobes path.
- Cleanup comments/styles.
Changes in v2:
- Fix a bug to recover original instruction address in
RIP-relative instruction fixup.
- Moved on tip/master.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: systemtap@sourceware.org
Cc: anderson@redhat.com
Link: http://lkml.kernel.org/r/20120305133209.5982.36568.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Mon, 5 Mar 2012 15:59:02 +0000 (16:59 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Improvements for 'perf annotate' from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Namhyung Kim [Thu, 23 Feb 2012 08:46:24 +0000 (17:46 +0900)]
perf annotate: Add missing newline on error message
If perf.data couldn't find vmlinux image for the given build-id,
it would print error message. However it lacked a newline at the
end, so the output looked like below:
$ perf annotate --stdio
No vmlinux file with build id
63b554b2e90f14a4bced200008865e757d3e8b36
was found in the path.
Please use:
perf buildid-cache -av vmlinux
or:
--vmlinux vmlinux Percent | Source code & Disassembly of a.out
------------------------------------------------
:
:
:
: Disassembly of section .text:
:
:
00000000004004f4 <foo>:
0.00 : 4004f4: push %rbp
0.00 : 4004f5: mov %rsp,%rbp
0.00 : 4004f8: movl $0x0,-0x4(%rbp)
0.00 : 4004ff: jmp 400517 <foo+0x23>
14.70 : 400501: mov 0x200b28(%rip),%rax # 601030 <count>
0.02 : 400508: add $0x1,%rax
0.01 : 40050c: mov %rax,0x200b1d(%rip) # 601030 <count>
0.01 : 400513: addl $0x1,-0x4(%rbp)
13.92 : 400517: cmpl $0x98967f,-0x4(%rbp)
71.33 : 40051e: jle 400501 <foo+0xd>
0.00 : 400520: leaveq
0.00 : 400521: retq
Fix it by adding a newline at the end of the message. It doesn't affect
the tui output AFAICS. New output will look like this:
...
or:
--vmlinux vmlinux
Percent | Source code & Disassembly of a.out
------------------------------------------------
:
:
:
: Disassembly of section .text:
...
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-6-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 23 Feb 2012 08:46:23 +0000 (17:46 +0900)]
perf annotate: Fix help string on tui
Separate multiple binding using /, capitalize descriptions, add missing
key binding.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 23 Feb 2012 08:46:22 +0000 (17:46 +0900)]
perf annotate: Restore title when came back to original symbol
On tui annotation, the title was set to name of the target symbol if
user selects the target. However it remained after returning to original
symbol from the target. Fix it.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 23 Feb 2012 08:46:21 +0000 (17:46 +0900)]
perf annotate: Handle lower case key code in annotate_browser__run()
Accepting upper case character only is unconvenient since it requires
SHIFT key too. Why not change to it accept a simple key stroke?
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 23 Feb 2012 08:46:20 +0000 (17:46 +0900)]
perf annotate: Print asm code as blue when source code is displayed
Print unselected asm code lines as blue. This is what we do now for
--stdio.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 23 Feb 2012 07:08:14 +0000 (16:08 +0900)]
perf tools: Add descriptions of missing Makefile arguments
There are some variable arguments can be specified on make invocation,
but some of them are missing descriptions so that user cannot be
informed easily. Fix it.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329980894-4289-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 23 Feb 2012 03:13:36 +0000 (12:13 +0900)]
perf evlist: Restore original errno after open failed
If perf_evsel__open() failed, the errno was set and returned properly.
However since the perf_evlist__open() called close() on fd's for all of
evsel x cpu x thread after the failure, the errno was overridden by
other code (EBADF). So the caller of the function ended up seeing
different error message and getting confused.
Fit it by restoring original return value. Because one of caller of the
function is in the python extension, and it uses system errno
internally, it'd be better restoring the original value rather than
using the return value of the function directly, IMHO (i.e. I'm not a
python expert :)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329966816-23175-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 5 Mar 2012 08:20:08 +0000 (09:20 +0100)]
Merge branch 'perf/urgent' into perf/core
Conflicts:
tools/perf/builtin-record.c
tools/perf/builtin-top.c
tools/perf/perf.h
tools/perf/util/top.h
Merge reason: resolve these cherry-picking conflicts.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Mon, 5 Mar 2012 08:05:44 +0000 (09:05 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Cherry picked fixes from perf/core, together with the kernel fix (
1018faa),
the sampling tools (top, record) are back working on AMD systems.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arnaldo Carvalho de Melo [Tue, 14 Feb 2012 16:05:30 +0000 (14:05 -0200)]
perf tools: Handle kernels that don't support attr.exclude_{guest,host}
Just fall back to resetting those fields, if set, warning the user that
that feature is not available.
If guest samples appear they will just be discarded because no struct
machine will be found and thus the event will be accounted as not
handled and dropped, see
0c09571.
Reported-by: Namhyung Kim <namhyung@gmail.com>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vuwxig36mzprl5n7nzvnxxsh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Joerg Roedel [Fri, 10 Feb 2012 17:05:05 +0000 (18:05 +0100)]
perf tools: Change perf_guest default back to false
Setting perf_guest to true by default makes no sense because the perf
subcommands can not setup guest symbol information and thus not process
and guest samples. The only exception is perf-kvm which changes the
perf_guest value on its own. So change the default for perf_guest back
to false.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328893505-4115-3-git-send-email-joerg.roedel@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 6 Feb 2012 22:27:52 +0000 (15:27 -0700)]
perf record: No build id option fails
A recent refactoring of perf-record introduced the following:
perf record -a -B
Couldn't generating buildids. Use --no-buildid to profile anyway.
sleep: Terminated
I believe the triple negative was meant to be only a double negative.
:-) While I'm there, fixed the grammar on the error message.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328567272-13190-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Joerg Roedel [Wed, 29 Feb 2012 13:57:32 +0000 (14:57 +0100)]
perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
It turned out that a performance counter on AMD does not
count at all when the GO or HO bit is set in the control
register and SVM is disabled in EFER.
This patch works around this issue by masking out the HO bit
in the performance counter control register when SVM is not
enabled.
The GO bit is not touched because it is only set when the
user wants to count in guest-mode only. So when SVM is
disabled the counter should not run at all and the
not-counting is the intended behaviour.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Avi Kivity <avi@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: stable@vger.kernel.org # v3.2
Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 2 Mar 2012 07:40:45 +0000 (08:40 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Various smaller perf/urgent fixes.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Prashanth Nageshappa [Tue, 28 Feb 2012 04:13:01 +0000 (09:43 +0530)]
perf probe: Ensure offset provided is not greater than function length without DWARF info too
The 'perf probe' command allows kprobe to be inserted at any offset from
a function start, which results in adding kprobes to unintended
location. (example: perf probe do_fork+10000 is allowed even though
size of do_fork is ~904).
My previous patch https://lkml.org/lkml/2012/2/24/42 addressed the case
where DWARF info was available for the kernel. This patch fixes the
case where perf probe is used on a kernel without debuginfo available.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F4C544D.1010909@linux.vnet.ibm.com
Signed-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Fri, 24 Feb 2012 19:31:38 +0000 (12:31 -0700)]
perf tools: Ensure comm string is properly terminated
If threads in a multi-threaded process have names shorter than the main
thread the comm for the named threads is not properly terminated.
E.g., for the process 'namedthreads' where each thread is named noploop%d
where %d is the thread number:
Before:
perf script -f comm,tid,ip,sym,dso
noploop:4ads 21616 400a49 noploop (/tmp/namedthreads)
The 'ads' in the thread comm bleeds over from the process name.
After:
perf script -f comm,tid,ip,sym,dso
noploop:4 21616 400a49 noploop (/tmp/namedthreads)
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1330111898-68071-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prashanth Nageshappa [Fri, 24 Feb 2012 07:41:39 +0000 (13:11 +0530)]
perf probe: Ensure offset provided is not greater than function length
The perf probe command allows kprobe to be inserted at any offset from a
function start, which results in adding kprobes to unintended location.
Example: perf probe do_fork+10000 is allowed even though size of do_fork
is ~904.
This patch will ensure probe addition fails when the offset specified is
greater than size of the function.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/4F473F33.4060409@linux.vnet.ibm.com
Signed-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 20 Feb 2012 01:47:26 +0000 (10:47 +0900)]
perf evlist: Return first evsel for non-sample event on old kernel
On old kernels that don't support sample_id_all feature,
perf_evlist__id2evsel() returns NULL for non-sampling events.
This breaks perf top when multiple events are given on command line. Fix
it by using first evsel in the evlist. This will also prevent getting
the same (potential) problem in such new tool/ old kernel combo.
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329702447-25045-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jason Baron [Tue, 28 Feb 2012 18:49:01 +0000 (13:49 -0500)]
static keys: Inline the static_key_enabled() function
In the jump label enabled case, calling static_key_enabled()
results in a function call. The function returns the results of
a compare, so it really doesn't need the overhead of a full
function call. Let's make it 'static inline' for both the jump
label enabled and disabled cases.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: a.p.zijlstra@chello.nl
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/201202281849.q1SIn1p2023270@int-mx10.intmail.prod.int.phx2.redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 28 Feb 2012 18:59:45 +0000 (19:59 +0100)]
Merge branch 'perf/jump-labels' into perf/core
Merge reason: After much naming discussion, there seems to be consensus
now - queue it up for v3.4.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Namhyung Kim [Tue, 28 Feb 2012 01:19:38 +0000 (10:19 +0900)]
perf/hwbp: Fix a possible memory leak
If kzalloc() for TYPE_DATA failed on a given cpu, previous chunk
of TYPE_INST will be leaked. Fix it.
Thanks to Peter Zijlstra for suggesting this better solution. It
should work as long as the initial value of the region is all
0's and that's the case of static (per-cpu) memory allocation.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1330391978-28070-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Mon, 27 Feb 2012 15:59:33 +0000 (07:59 -0800)]
Merge git://git./linux/kernel/git/aia21/ntfs
Here are some trivial NTFS changes (a spelling fix and two use before
NULL check cases found by Coverity as well as an update in MAINTAINERS
for the path to the ntfs git repo) together with a simple LDM fix for
parsing fragmented VBLKs.
* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs:
NTFS: Update git repo path in MAINTAINERS file.
LDM: Fix reassembly of extended VBLKs.
NTFS: Correct two spelling errors "dealocate" to "deallocate" in mft.c.
NTFS: Do not dereference pointer before checking for NULL.
NTFS: Remove unused variable.
Linus Torvalds [Mon, 27 Feb 2012 15:55:51 +0000 (07:55 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/AMD: Fix UP build error
x86: Specify a size for the cmp in the NMI handler
x86/nmi: Test saved %cs in NMI to determine nested NMI case
x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h processors
x86/microcode: Remove noisy AMD microcode warning
Linus Torvalds [Mon, 27 Feb 2012 15:55:39 +0000 (07:55 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/events: Revert trace_sched_stat_sleeptime()
Linus Torvalds [Mon, 27 Feb 2012 15:54:57 +0000 (07:54 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Handle pending irqs in irq_startup()
genirq: Unmask oneshot irqs when thread was not woken
Heiko Carstens [Mon, 27 Feb 2012 09:01:52 +0000 (10:01 +0100)]
compat: fix compile breakage on s390
The new is_compat_task() define for the !COMPAT case in
include/linux/compat.h conflicts with a similar define in
arch/s390/include/asm/compat.h.
This is the minimal patch which fixes the build issues.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton Altaparmakov [Mon, 27 Feb 2012 09:08:33 +0000 (09:08 +0000)]
NTFS: Update git repo path in MAINTAINERS file.
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Anton Altaparmakov [Mon, 27 Feb 2012 09:01:22 +0000 (09:01 +0000)]
Merge branch 'master' of /Volumes/CaseSensitiveDisk/linux
Ingo Molnar [Mon, 27 Feb 2012 07:44:48 +0000 (08:44 +0100)]
Merge branch 'tip/perf/core' of git://git./linux/kernel/git/rostedt/linux-trace into perf/core
Linus Torvalds [Mon, 27 Feb 2012 05:03:16 +0000 (21:03 -0800)]
Merge tag 'stable/for-linus-fixes-3.3-rc5' of git://git./linux/kernel/git/konrad/xen
Two fixes to fix a memory corruption bug when WC pages never get
converted back to WB but end up being recycled in the general memory
pool as WC.
There is a better way of fixing this, but there is not enough time to do
the full benchmarking to pick one of the right options - so picking the
one that favors stability for right now.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* tag 'stable/for-linus-fixes-3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/pat: Disable PAT support for now.
xen/setup: Remove redundant filtering of PTE masks.
Linus Torvalds [Mon, 27 Feb 2012 05:02:07 +0000 (21:02 -0800)]
Merge tag 'for-linus' of git://github.com/rustyrussell/linux
* tag 'for-linus' of git://github.com/rustyrussell/linux:
mod/file2alias: make modpost compile on darwin again
Ian Kent [Mon, 27 Feb 2012 00:03:38 +0000 (08:03 +0800)]
autofs4 - update MAINTAINERS mailing list entry
The autofs mailing list has moved to vger.kernel.org.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andreas BieĂźmann [Fri, 24 Feb 2012 07:23:53 +0000 (08:23 +0100)]
mod/file2alias: make modpost compile on darwin again
commit
e49ce14150c64b29a8dd211df785576fa19a9858 breaks cross compiling
the linux kernel on darwin hosts.
This fix introduce some minimal glue to adopt linker section handling
for darwin hosts.
Signed-off-by: Andreas BieĂźmann <andreas@biessmann.de>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Jochen Friedrich <jochen@scram.de>
CC: Samuel Ortiz <sameo@linux.intel.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Bernhard Walle <bernhard@bwalle.de>
Linus Torvalds [Sun, 26 Feb 2012 20:47:17 +0000 (12:47 -0800)]
Merge git://git./linux/kernel/git/davem/net
1) ICMP sockets leave err uninitialized but we try to return it for the
unsupported MSG_OOB case, reported by Dave Jones.
2) Add new Zaurus device ID entries, from Dave Jones.
3) Pointer calculation in hso driver memset is wrong, from Dan
Carpenter.
4) ks8851_probe() checks unsigned value as negative, fix also from Dan
Carpenter.
5) Fix crashes in atl1c driver due to TX queue handling, from Eric
Dumazet. I anticipate some TX side locking fixes coming in the near
future for this driver as well.
6) The inline directive fix in Bluetooth which was breaking the build
only with very new versions of GCC, from Johan Hedberg.
7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge
window, reported by Meelis Roos and fixed by Eric Dumazet.
8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng.
9) Some ip6_route_output() callers test the return value for NULL, but
this never happens as the convention is to return a dst entry with
dst->error set. Fixes from RonQing Li.
10) Logitech Harmony 900 should be handled by zaurus driver not
cdc_ether, update white lists and black lists accordingly. From
Scott Talbert.
11) Receiving from certain kinds of devices there won't be a MAC header,
so there is no MAC header to fixup in the IPSEC code, and if we try
to do it we'll crash. Fix from Eric Dumazet.
12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny
Petrilin.
13) Fix regression in link-down handling in davinci_emac which causes
all RX descriptors to be freed up and therefore RX to wedge
completely, from Christian Riesch.
14) It took two attempts, but ctnetlink soft lockups seem to be
cured now, from Pablo Neira Ayuso.
15) Endianness bug fix in ENIC driver, from Santosh Nayak.
16) The long ago conversion of the PPP fragmentation code over to
abstracted SKB list handling wasn't perfect, once we get an
out of sequence SKB we don't flush the rest of them like we
should. From Ben McKeegan.
17) Fix regression of ->ip_summed initialization in sfc driver.
From Ben Hutchings.
18) Bluetooth timeout mistakenly using msecs instead of jiffies,
from Andrzej Kaczmarek.
19) Using _sync variant of work cancellation results in deadlocks,
use the non _sync variants instead. From Andre Guedes.
20) Bluetooth rfcomm code had reference counting problems leading
to crashes, fix from Octavian Purdila.
21) The conversion of netem over to classful qdisc handling added
two bugs to netem_dequeue(), fixes from Eric Dumazet.
22) Missing pci_iounmap() in ATM Solos driver. Fix from Julia Lawall.
23) b44_pci_exit() should not have __exit tag since it's invoked from
non-__exit code. From Nikola Pajkovsky.
24) The conversion of the neighbour hash tables over to RCU added a
race, fixed here by adding the necessary reread of tbl->nht, fix
from Michel Machado.
25) When we added VF (virtual function) attributes for network device
dumps, this potentially bloats up the size of the dump of one
network device such that the dump size is too large for the buffer
allocated by properly written netlink applications.
In particular, if you add 255 VFs to a network device, parts of
GLIBC stop working.
To fix this, we add an attribute that is used to turn on these
extended portions of the network device dump. Sophisticaed
applications like 'ip' that want to see this stuff will be changed
to set the attribute, whereas things like GLIBC that don't care
about VFs simply will not, and therefore won't be busted by the
mere presence of VFs on a network device.
Thanks to the tireless work of Greg Rose on this fix.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
sfc: Fix assignment of ip_summed for pre-allocated skbs
ppp: fix 'ppp_mp_reconstruct bad seq' errors
enic: Fix endianness bug.
gre: fix spelling in comments
netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)
Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries"
davinci_emac: Do not free all rx dma descriptors during init
mlx4_core: Fixing array indexes when setting port types
phy: IC+101G and PHY_HAS_INTERRUPT flag
netdev/phy/icplus: Correct broken phy_init code
ipsec: be careful of non existing mac headers
Move Logitech Harmony 900 from cdc_ether to zaurus
hso: memsetting wrong data in hso_get_count()
netfilter: ip6_route_output() never returns NULL.
ethernet/broadcom: ip6_route_output() never returns NULL.
ipv6: ip6_route_output() never returns NULL.
jme: Fix FIFO flush issue
atm: clip: remove clip_tbl
ipv4: ping: Fix recvmsg MSG_OOB error handling.
rtnetlink: Fix problem with buffer allocation
...
Linus Torvalds [Sun, 26 Feb 2012 17:44:55 +0000 (09:44 -0800)]
Fix autofs compile without CONFIG_COMPAT
The autofs compat handling fix caused a compile failure when
CONFIG_COMPAT isn't defined.
Instead of adding random #ifdef'fery in autofs, let's just make the
compat helpers earlier to use: without CONFIG_COMPAT, is_compat_task()
just hardcodes to zero.
We could probably do something similar for a number of other cases where
we have #ifdef's in code, but this is the low-hanging fruit.
Reported-and-tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 25 Feb 2012 20:18:16 +0000 (12:18 -0800)]
Linux 3.3-rc5
Linus Torvalds [Sat, 25 Feb 2012 20:12:08 +0000 (12:12 -0800)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Couple of minor driver fixes.
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max34440) Fix resetting temperature history
hwmon: (f75375s) Fix register write order when setting fans to full speed
hwmon: (ads1015) Fix file leak in probe function
hwmon: (max6639) Fix PPR register initialization to set both channels
hwmon: (max6639) Fix FAN_FROM_REG calculation
Linus Torvalds [Sat, 25 Feb 2012 20:11:25 +0000 (12:11 -0800)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild
three kbuild fixes for 3.3:
- make deb-pkg symlink race fix.
- make coccicheck fix.
- Dropping the check for modutils. This is not a regression, but
allows the module-init-tools replacement kmod work with the 3.3
kernel.
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
coccicheck: change handling of C={1,2} when M= is set
builddeb: Don't create files in /tmp with predictable names
kbuild: do not check for ancient modutils tools
Ian Kent [Wed, 22 Feb 2012 12:45:44 +0000 (20:45 +0800)]
autofs: work around unhappy compat problem on x86-64
When the autofs protocol version 5 packet type was added in commit
5c0a32fc2cd0 ("autofs4: add new packet type for v5 communications"), it
obvously tried quite hard to be word-size agnostic, and uses explicitly
sized fields that are all correctly aligned.
However, with the final "char name[NAME_MAX+1]" array at the end, the
actual size of the structure ends up being not very well defined:
because the struct isn't marked 'packed', doing a "sizeof()" on it will
align the size of the struct up to the biggest alignment of the members
it has.
And despite all the members being the same, the alignment of them is
different: a "__u64" has 4-byte alignment on x86-32, but native 8-byte
alignment on x86-64. And while 'NAME_MAX+1' ends up being a nice round
number (256), the name[] array starts out a 4-byte aligned.
End result: the "packed" size of the structure is 300 bytes: 4-byte, but
not 8-byte aligned.
As a result, despite all the fields being in the same place on all
architectures, sizeof() will round up that size to 304 bytes on
architectures that have 8-byte alignment for u64.
Note that this is *not* a problem for 32-bit compat mode on POWER, since
there __u64 is 8-byte aligned even in 32-bit mode. But on x86, 32-bit
and 64-bit alignment is different for 64-bit entities, and as a result
the structure that has exactly the same layout has different sizes.
So on x86-64, but no other architecture, we will just subtract 4 from
the size of the structure when running in a compat task. That way we
will write the properly sized packet that user mode expects.
Not pretty. Sadly, this very subtle, and unnecessary, size difference
has been encoded in user space that wants to read packets of *exactly*
the right size, and will refuse to touch anything else.
Reported-and-tested-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 25 Feb 2012 04:03:14 +0000 (20:03 -0800)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband
One InfiniBand/RDMA regression fix for 3.3:
- mlx4 SR-IOV changes added static exported functions, which doesn't
build on powerpc at least. Fix from Doug Ledford for this.
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
mlx4_core: Exported functions can't be static
David S. Miller [Sat, 25 Feb 2012 03:12:44 +0000 (22:12 -0500)]
Merge branch 'sfc-3.3' of git://git./linux/kernel/git/bwh/sfc
Ben Hutchings [Sat, 25 Feb 2012 00:03:10 +0000 (00:03 +0000)]
sfc: Fix assignment of ip_summed for pre-allocated skbs
When pre-allocating skbs for received packets, we set ip_summed =
CHECKSUM_UNNCESSARY. We used to change it back to CHECKSUM_NONE when
the received packet had an incorrect checksum or unhandled protocol.
Commit
bc8acf2c8c3e43fcc192762a9f964b3e9a17748b ('drivers/net: avoid
some skb->ip_summed initializations') mistakenly replaced the latter
assignment with a DEBUG-only assertion that ip_summed ==
CHECKSUM_NONE. This assertion is always false, but it seems no-one
has exercised this code path in a DEBUG build.
Fix this by moving our assignment of CHECKSUM_UNNECESSARY into
efx_rx_packet_gro().
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Linus Torvalds [Sat, 25 Feb 2012 00:08:51 +0000 (16:08 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6
SCSI fixes on
20120224:
"This is a set of assorted bug fixes for power management, mpt2sas,
ipr, the rdac device handler and quite a big chunk for qla2xxx (plus a
use after free of scsi_host in scsi_scan.c). "
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] scsi_dh_rdac: Fix for unbalanced reference count
[SCSI] scsi_pm: Fix bug in the SCSI power management handler
[SCSI] scsi_scan: Fix 'Poison overwritten' warning caused by using freed 'shost'
[SCSI] qla2xxx: Update version number to 8.03.07.13-k.
[SCSI] qla2xxx: Proper detection of firmware abort error code for ISP82xx.
[SCSI] qla2xxx: Remove resetting memory during device initialization for ISP82xx.
[SCSI] qla2xxx: Complete mailbox command timedout to avoid initialization failures during next reset cycle.
[SCSI] qla2xxx: Remove check for null fcport from host reset handler.
[SCSI] qla2xxx: Correct out of bounds read of ISP2200 mailbox registers.
[SCSI] qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing.
[SCSI] qla2xxx: Clear options-flags while issuing stop-firmware mbx command.
[SCSI] qla2xxx: Add an "is reset active" helper.
[SCSI] qla2xxx: Add check for null fcport references in qla2xxx_queuecommand.
[SCSI] qla2xxx: Propagate up abort failures.
[SCSI] isci: Fix NULL ptr dereference when no firmware is being loaded
[SCSI] ipr: fix eeh recovery for 64-bit adapters
[SCSI] mpt2sas: Fix mismatch in mpt2sas_base_hard_reset_handler() mutex lock-unlock
Ben McKeegan [Fri, 24 Feb 2012 06:33:56 +0000 (06:33 +0000)]
ppp: fix 'ppp_mp_reconstruct bad seq' errors
This patch fixes a (mostly cosmetic) bug introduced by the patch
'ppp: Use SKB queue abstraction interfaces in fragment processing'
found here: http://www.spinics.net/lists/netdev/msg153312.html
The above patch rewrote and moved the code responsible for cleaning
up discarded fragments but the new code does not catch every case
where this is necessary. This results in some discarded fragments
remaining in the queue, and triggering a 'bad seq' error on the
subsequent call to ppp_mp_reconstruct. Fragments are discarded
whenever other fragments of the same frame have been lost.
This can generate a lot of unwanted and misleading log messages.
This patch also adds additional detail to the debug logging to
make it clearer which fragments were lost and which other fragments
were discarded as a result of losses. (Run pppd with 'kdebug 1'
option to enable debug logging.)
Signed-off-by: Ben McKeegan <ben@netservers.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Santosh Nayak [Fri, 24 Feb 2012 06:56:39 +0000 (06:56 +0000)]
enic: Fix endianness bug.
Sparse complaints the endian bug.
Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Dietsche [Fri, 20 Jan 2012 23:10:35 +0000 (17:10 -0600)]
coccicheck: change handling of C={1,2} when M= is set
This patch reverts a portion of
d0bc1fb4 so that coccicheck will
work properly when C=1 or C=2.
Reported-and-tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
David S. Miller [Fri, 24 Feb 2012 22:41:57 +0000 (17:41 -0500)]
Merge branch 'master' of git://1984.lsi.us.es/net
stephen hemminger [Fri, 24 Feb 2012 08:08:20 +0000 (08:08 +0000)]
gre: fix spelling in comments
The original spelling and bad word choice makes these comments hard to read.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 24 Feb 2012 20:32:51 +0000 (12:32 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] hdpvr: update picture controls to support firmware versions > 0.15
[media] wl128x: fix build errors when GPIOLIB is not enabled
[media] hdpvr: fix race conditon during start of streaming
[media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes
[media] imon: don't wedge hardware after early callbacks
Oleg Nesterov [Fri, 24 Feb 2012 19:07:29 +0000 (20:07 +0100)]
epoll: ep_unregister_pollwait() can use the freed pwq->whead
signalfd_cleanup() ensures that ->signalfd_wqh is not used, but
this is not enough. eppoll_entry->whead still points to the memory
we are going to free, ep_unregister_pollwait()->remove_wait_queue()
is obviously unsafe.
Change ep_poll_callback(POLLFREE) to set eppoll_entry->whead = NULL,
change ep_unregister_pollwait() to check pwq->whead != NULL under
rcu_read_lock() before remove_wait_queue(). We add the new helper,
ep_remove_wait_queue(), for this.
This works because sighand_cachep is SLAB_DESTROY_BY_RCU and because
->signalfd_wqh is initialized in sighand_ctor(), not in copy_sighand.
ep_unregister_pollwait()->remove_wait_queue() can play with already
freed and potentially reused ->sighand, but this is fine. This memory
must have the valid ->signalfd_wqh until rcu_read_unlock().
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Cc: <stable@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Fri, 24 Feb 2012 19:07:11 +0000 (20:07 +0100)]
epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()
This patch is intentionally incomplete to simplify the review.
It ignores ep_unregister_pollwait() which plays with the same wqh.
See the next change.
epoll assumes that the EPOLL_CTL_ADD'ed file controls everything
f_op->poll() needs. In particular it assumes that the wait queue
can't go away until eventpoll_release(). This is not true in case
of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand
which is not connected to the file.
This patch adds the special event, POLLFREE, currently only for
epoll. It expects that init_poll_funcptr()'ed hook should do the
necessary cleanup. Perhaps it should be defined as EPOLLFREE in
eventpoll.
__cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if
->signalfd_wqh is not empty, we add the new signalfd_cleanup()
helper.
ep_poll_callback(POLLFREE) simply does list_del_init(task_list).
This make this poll entry inconsistent, but we don't care. If you
share epoll fd which contains our sigfd with another process you
should blame yourself. signalfd is "really special". I simply do
not know how we can define the "right" semantics if it used with
epoll.
The main problem is, epoll calls signalfd_poll() once to establish
the connection with the wait queue, after that signalfd_poll(NULL)
returns the different/inconsistent results depending on who does
EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd
has nothing to do with the file, it works with the current thread.
In short: this patch is the hack which tries to fix the symptoms.
It also assumes that nobody can take tasklist_lock under epoll
locks, this seems to be true.
Note:
- we do not have wake_up_all_poll() but wake_up_poll()
is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE.
- signalfd_cleanup() uses POLLHUP along with POLLFREE,
we need a couple of simple changes in eventpoll.c to
make sure it can't be "lost".
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Cc: <stable@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 24 Feb 2012 17:02:53 +0000 (09:02 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Quoth Chris:
"This is later than I wanted because I got backed up running through
btrfs bugs from the Oracle QA teams. But they are all bug fixes that
we've queued and tested since rc1.
Nothing in particular stands out, this just reflects bug fixing and QA
done in parallel by all the btrfs developers. The most user visible
of these is:
Btrfs: clear the extent uptodate bits during parent transid failures
Because that helps deal with out of date drives (say an iscsi disk
that has gone away and come back). The old code wasn't always
properly retrying the other mirror for this type of failure."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits)
Btrfs: fix compiler warnings on 32 bit systems
Btrfs: increase the global block reserve estimates
Btrfs: clear the extent uptodate bits during parent transid failures
Btrfs: add extra sanity checks on the path names in btrfs_mksubvol
Btrfs: make sure we update latest_bdev
Btrfs: improve error handling for btrfs_insert_dir_item callers
Btrfs: be less strict on finding next node in clear_extent_bit
Btrfs: fix a bug on overcommit stuff
Btrfs: kick out redundant stuff in convert_extent_bit
Btrfs: skip states when they does not contain bits to clear
Btrfs: check return value of lookup_extent_mapping() correctly
Btrfs: fix deadlock on page lock when doing auto-defragment
Btrfs: fix return value check of extent_io_ops
btrfs: honor umask when creating subvol root
btrfs: silence warning in raid array setup
btrfs: fix structs where bitfields and spinlock/atomic share 8B word
btrfs: delalloc for page dirtied out-of-band in fixup worker
Btrfs: fix memory leak in load_free_space_cache()
btrfs: don't check DUP chunks twice
Btrfs: fix trim 0 bytes after a device delete
...
Linus Torvalds [Fri, 24 Feb 2012 17:01:46 +0000 (09:01 -0800)]
Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming
This is the arch/c6x part of commit
7c43185138cf ("Kbuild: Use dtc's -d
(dependency) option") which was dropped because c6x had not yet been
merged at the time.
* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
Kbuild: Use dtc's -d (dependency) option
Kyle McMartin [Fri, 24 Feb 2012 15:36:16 +0000 (10:36 -0500)]
MAINTAINERS: drop me from PA-RISC maintenance
I don't even live in the same country as any of my PA-RISC hardware
these days, so the odds of me touching the code are pretty low.
(Also re-order things to ensure jejb gets CC'd since he's been the
primary maintainer for the last few years.)
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Thu, 23 Feb 2012 13:51:00 +0000 (13:51 +0000)]
NOMMU: Don't need to clear vm_mm when deleting a VMA
Don't clear vm_mm in a deleted VMA as it's unnecessary and might
conceivably break the filesystem or driver VMA close routine.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Thu, 23 Feb 2012 13:50:35 +0000 (13:50 +0000)]
NOMMU: Lock i_mmap_mutex for access to the VMA prio list
Lock i_mmap_mutex for access to the VMA prio list to prevent concurrent
access. Currently, certain parts of the mmap handling are protected by
the region mutex, but not all.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 24 Feb 2012 16:57:22 +0000 (08:57 -0800)]
Merge tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh
SH/R-Mobile fixes for 3.3-rc5
* tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh:
arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twice
ARM: mach-shmobile: r8a7779 PFC IPSR4 fix
ARM: mach-shmobile: sh73a0 PSTR 32-bit access fix
ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372
ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support
arm: fix compile failure in mach-shmobile/board-ag5evm.c
ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment
ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd
ARM: mach-shmobile: simplify MMCIF DMA configuration
ARM: mach-shmobile: IRQ driven GPIO key support for Kota2
ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix
ARM: mach-shmobile: sh73a0 PINT IRQ base fix
Linus Torvalds [Fri, 24 Feb 2012 16:56:51 +0000 (08:56 -0800)]
Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh
SuperH fixes for 3.3-rc5
* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH
sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr
arch/sh: remove references to cpu_*_map.
sh: Fix typo in pci-sh7780.c
sh: add platform_device for SPI1 in setup-sh7757
sh: modify resource for SPI0 in setup-sh7757
sh: se7724: fix compile breakage
sh: clkfwk: bugfix: use clk_reparent() for div6 clocks
sh: clock-sh7724: fixup sh_fsi clock settings
sh: sh7757lcr: update to the new MMCIF DMA configuration
sh: fix the sh_mmcif_plat_data in board-sh7757lcr
video: pvr2fb: Fix up spurious section mismatch warnings.
sh: Defer to asm-generic/device.h.
Anton Vorontsov [Fri, 24 Feb 2012 01:14:46 +0000 (05:14 +0400)]
mm: memcg: Correct unregistring of events attached to the same eventfd
There is an issue when memcg unregisters events that were attached to
the same eventfd:
- On the first call mem_cgroup_usage_unregister_event() removes all
events attached to a given eventfd, and if there were no events left,
thresholds->primary would become NULL;
- Since there were several events registered, cgroups core will call
mem_cgroup_usage_unregister_event() again, but now kernel will oops,
as the function doesn't expect that threshold->primary may be NULL.
That's a good question whether mem_cgroup_usage_unregister_event()
should actually remove all events in one go, but nowadays it can't
do any better as cftype->unregister_event callback doesn't pass
any private event-associated cookie. So, let's fix the issue by
simply checking for threshold->primary.
FWIW, w/o the patch the following oops may be observed:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000004
IP: [<
ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0
Pid: 574, comm: kworker/0:2 Not tainted 3.3.0-rc4+ #9 Bochs Bochs
RIP: 0010:[<
ffffffff810be32c>] [<
ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0
RSP: 0018:
ffff88001d0b9d60 EFLAGS:
00010246
Process kworker/0:2 (pid: 574, threadinfo
ffff88001d0b8000, task
ffff88001de91cc0)
Call Trace:
[<
ffffffff8107092b>] cgroup_event_remove+0x2b/0x60
[<
ffffffff8103db94>] process_one_work+0x174/0x450
[<
ffffffff8103e413>] worker_thread+0x123/0x2d0
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Fri, 24 Feb 2012 11:44:34 +0000 (03:44 -0800)]
hwmon: (max34440) Fix resetting temperature history
Temperature history is reset by writing 0x8000 into the peak temperature
register, not 0xffff.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Chris Mason [Fri, 24 Feb 2012 15:39:05 +0000 (10:39 -0500)]
Btrfs: fix compiler warnings on 32 bit systems
The enospc tracing code added some interesting uses of
u64 pointer casts.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Jozsef Kadlecsik [Fri, 24 Feb 2012 10:45:49 +0000 (11:45 +0100)]
netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)
Marcell Zambo and Janos Farago noticed and reported that when
new conntrack entries are added via netlink and the conntrack table
gets full, soft lockup happens. This is because the nf_conntrack_lock
is held while nf_conntrack_alloc is called, which is in turn wants
to lock nf_conntrack_lock while evicting entries from the full table.
The patch fixes the soft lockup with limiting the holding of the
nf_conntrack_lock to the minimum, where it's absolutely required.
It required to extend (and thus change) nf_conntrack_hash_insert
so that it makes sure conntrack and ctnetlink do not add the same entry
twice to the conntrack table.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Fri, 24 Feb 2012 11:18:38 +0000 (12:18 +0100)]
Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries"
This reverts commit
af14cca162ddcdea017b648c21b9b091e4bf1fa4.
This patch contains a race condition between packets and ctnetlink
in the conntrack addition. A new patch to fix this issue follows up.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Anton Altaparmakov [Fri, 24 Feb 2012 09:39:16 +0000 (09:39 +0000)]
Merge branch 'master' of /Volumes/CaseSensitiveDisk/linux
Anton Altaparmakov [Fri, 24 Feb 2012 09:37:42 +0000 (09:37 +0000)]
LDM: Fix reassembly of extended VBLKs.
From: Ben Hutchings <ben@decadent.org.uk>
Extended VBLKs (those larger than the preset VBLK size) are divided
into fragments, each with its own VBLK header. Our LDM implementation
generally assumes that each VBLK is contiguous in memory, so these
fragments must be assembled before further processing.
Currently the reassembly seems to be done quite wrongly - no VBLK
header is copied into the contiguous buffer, and the length of the
header is subtracted twice from each fragment. Also the total
length of the reassembled VBLK is calculated incorrectly.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Anton Altaparmakov [Fri, 24 Feb 2012 09:17:09 +0000 (09:17 +0000)]
NTFS: Correct two spelling errors "dealocate" to "deallocate" in mft.c.
From: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Ingo Molnar [Fri, 24 Feb 2012 07:31:31 +0000 (08:31 +0100)]
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]()
So here's a boot tested patch on top of Jason's series that does
all the cleanups I talked about and turns jump labels into a
more intuitive to use facility. It should also address the
various misconceptions and confusions that surround jump labels.
Typical usage scenarios:
#include <linux/static_key.h>
struct static_key key = STATIC_KEY_INIT_TRUE;
if (static_key_false(&key))
do unlikely code
else
do likely code
Or:
if (static_key_true(&key))
do likely code
else
do unlikely code
The static key is modified via:
static_key_slow_inc(&key);
...
static_key_slow_dec(&key);
The 'slow' prefix makes it abundantly clear that this is an
expensive operation.
I've updated all in-kernel code to use this everywhere. Note
that I (intentionally) have not pushed through the rename
blindly through to the lowest levels: the actual jump-label
patching arch facility should be named like that, so we want to
decouple jump labels from the static-key facility a bit.
On non-jump-label enabled architectures static keys default to
likely()/unlikely() branches.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jason Baron <jbaron@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: a.p.zijlstra@chello.nl
Cc: mathieu.desnoyers@efficios.com
Cc: davem@davemloft.net
Cc: ddaney.cavm@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Christian Riesch [Thu, 23 Feb 2012 01:14:17 +0000 (01:14 +0000)]
davinci_emac: Do not free all rx dma descriptors during init
This patch fixes a regression that was introduced by
commit
0a5f38467765ee15478db90d81e40c269c8dda20
davinci_emac: Add Carrier Link OK check in Davinci RX Handler
Said commit adds a check whether the carrier link is ok. If the link is
not ok, the skb is freed and no new dma descriptor added to the rx dma
channel. This causes trouble during initialization when the carrier
status has not yet been updated. If a lot of packets are received while
netif_carrier_ok returns false, all dma descriptors are freed and the
rx dma transfer is stopped.
The bug occurs when the board is connected to a network with lots of
traffic and the ifconfig down/up is done, e.g., when reconfiguring
the interface with DHCP.
The bug can be reproduced by flood pinging the davinci board while doing
ifconfig eth0 down
ifconfig eth0 up
on the board.
After that, the rx path stops working and the overrun value reported
by ifconfig is counting up.
This patch reverts commit
0a5f38467765ee15478db90d81e40c269c8dda20
and instead issues warnings only if cpdma_chan_submit returns -ENOMEM.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: <stable@vger.kernel.org>
Cc: Hegde, Vinay <vinay.hegde@ti.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Tue, 21 Feb 2012 20:03:30 +0000 (15:03 -0500)]
static keys: Add docs better explaining the whole 'struct static_key' mechanism
Add better documentation for static keys.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: davem@davemloft.net
Cc: ddaney.cavm@gmail.com
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/52570e566e5f1914f27b67e4eafb5781b8f9f9db.1329851692.git.jbaron@redhat.com
[ Added a 'Summary' section and rewrote it to explain static keys ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yevgeny Petrilin [Thu, 23 Feb 2012 07:04:35 +0000 (07:04 +0000)]
mlx4_core: Fixing array indexes when setting port types
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danny Kukawka [Thu, 16 Feb 2012 14:46:38 +0000 (15:46 +0100)]
arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twice
arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h'
twice, remove the duplicate.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Mon, 30 Jan 2012 02:25:07 +0000 (11:25 +0900)]
ARM: mach-shmobile: r8a7779 PFC IPSR4 fix
Fix the bit field width information for the IPSR4 register
in the r8a7779 pin function controller (PFC).
Without this fix the Marzen board fails to receive data
over the serial console due to misconfigured pin function
for the RX pin.
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Mon, 30 Jan 2012 02:03:49 +0000 (11:03 +0900)]
ARM: mach-shmobile: sh73a0 PSTR 32-bit access fix
Convert the sh73a0 SMP code to use 32-bit PSTR access.
This fixes wakeup from deep sleep for sh73a0 secondary CPUs.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Fri, 24 Feb 2012 04:23:23 +0000 (13:23 +0900)]
Merge git://git./linux/kernel/git/torvalds/linux into rmobile-fixes-for-linus
Phil Edworthy [Tue, 21 Feb 2012 08:29:57 +0000 (08:29 +0000)]
sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Shimoda, Yoshihiro [Mon, 20 Feb 2012 08:26:50 +0000 (17:26 +0900)]
sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr
The latest sh_eth driver needs a resource of TSU in the channel 1,
if the controller has TSU registers. So, this patch adds the resource.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Rusty Russell [Wed, 15 Feb 2012 04:58:04 +0000 (15:28 +1030)]
arch/sh: remove references to cpu_*_map.
This has been obsolescent for a while; time for the final push.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Masanari Iida [Sat, 4 Feb 2012 12:40:24 +0000 (21:40 +0900)]
sh: Fix typo in pci-sh7780.c
Correct spelling "erorr" to "error" in
arch/sh/drivers/pci/pci-sh7780.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Anton Altaparmakov [Thu, 23 Feb 2012 23:40:05 +0000 (23:40 +0000)]
Restore direct_io / truncate locking API
With kernel 3.1, Christoph removed i_alloc_sem and replaced it with
calls (namely inode_dio_wait() and inode_dio_done()) which are
EXPORT_SYMBOL_GPL() thus they cannot be used by non-GPL file systems and
further inode_dio_wait() was pushed from notify_change() into the file
system ->setattr() method but no non-GPL file system can make this call.
That means non-GPL file systems cannot exist any more unless they do not
use any VFS functionality related to reading/writing as far as I can
tell or at least as long as they want to implement direct i/o.
Both Linus and Al (and others) have said on LKML that this breakage of
the VFS API should not have happened and that the change was simply
missed as it was not documented in the change logs of the patches that
did those changes.
This patch changes the two function exports in question to be
EXPORT_SYMBOL() thus restoring the VFS API as it used to be - accessible
for all modules.
Christoph, who introduced the two functions and exported them GPL-only
is CC-ed on this patch to give him the opportunity to object to the
symbols being changed in this manner if he did indeed intend them to be
GPL-only and does not want them to become available to all modules.
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
CC: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 23 Feb 2012 23:38:57 +0000 (15:38 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
A fix from Jesper Juhl removes an assignment in an ASSERT when a compare
is intended. Two fixes from Mitsuo Hayasaka address off-by-ones in XFS
quota enforcement.
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: make inode quota check more general
xfs: change available ranges of softlimit and hardlimit in quota check
XFS: xfs_trans_add_item() - don't assign in ASSERT() when compare is intended
Giuseppe CAVALLARO [Tue, 21 Feb 2012 21:26:28 +0000 (21:26 +0000)]
phy: IC+101G and PHY_HAS_INTERRUPT flag
This patch adds the PHY_HAS_INTERRUPT flag for IC+101 device series.
Also the patch does a simple dity-up to signal that
the driver actually is for IP101A LF and IP101G devices.
In fact, these are two similar PHYs that have the same IDs
and mainly differ for the EEE capability supported in the
G series.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David McKay [Tue, 21 Feb 2012 21:24:57 +0000 (21:24 +0000)]
netdev/phy/icplus: Correct broken phy_init code
The code for ip1001_config_init() was totally broken if you were not
using RGMII. Instead of returning an error code or zero it actually
returned the value in the IP1001_SPEC_CTRL_STATUS_2 register. It was
also trying to set the IP1001_APS_ON bit , but never actually wrote
back the register.
The error checking was also incorrect in both this function and the
reset function, so this patch fixes that up in a consistent fashion.
Signed-off-by: David McKay <david.mckay@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 23 Feb 2012 10:55:02 +0000 (10:55 +0000)]
ipsec: be careful of non existing mac headers
Niccolo Belli reported ipsec crashes in case we handle a frame without
mac header (atm in his case)
Before copying mac header, better make sure it is present.
Bugzilla reference: https://bugzilla.kernel.org/show_bug.cgi?id=42809
Reported-by: Niccolò Belli <darkbasic@linuxsystems.it>
Tested-by: Niccolò Belli <darkbasic@linuxsystems.it>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 23 Feb 2012 19:48:36 +0000 (11:48 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
BenH says:
'Here are a few more powerpc bits for you. A stupid regression I
introduced with my previous commit to "fix" program check exceptions
(brown paper bag for me), fix the cpuidle default, a bug fix for
something that isn't strictly speaking a regression but some upstream
changes causes it to show in lockdep now while it didn't before, and
finally a trivial one for rusty to make his life easier later on
removing the old cpumask cruft. '
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix various issues with return to userspace
cpuidle: Default y on powerpc pSeries
powerpc: Fix program check handling when lockdep is enabled
powerpc: Remove references to cpu_*_map
Linus Torvalds [Thu, 23 Feb 2012 19:28:05 +0000 (11:28 -0800)]
Merge tag 'sound-fixes' of git://git./linux/kernel/git/tiwai/sound
sound fixes for 3.3-rc5
Just a collection of boring small fixes for ASoC, HD-audio Realtek
and USB-audio drivers.
* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: snd-usb-caiaq: Fix the return of XRUN
ASoC: ak4642: fixup HeadPhone L/R dapm settings
ALSA: hda/realtek - Fix surround output regression on Acer Aspire 5935
ALSA: hda/realtek - Fix overflow of vol/sw check bitmap
ALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk()
ASoC: wm8962: Fix sidetone enumeration texts
Liu Bo [Thu, 23 Feb 2012 15:49:04 +0000 (10:49 -0500)]
Btrfs: increase the global block reserve estimates
When doing IO with large amounts of data fragmentation, the global block
reserve calulations are too low. This increases them to avoid
ENOSPC crashes.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 22 Feb 2012 17:36:24 +0000 (12:36 -0500)]
Btrfs: clear the extent uptodate bits during parent transid failures
If btrfs reads a block and finds a parent transid mismatch, it clears
the uptodate flags on the extent buffer, and the pages inside it. But
we only clear the uptodate bits in the state tree if the block straddles
more than one page.
This is from an old optimization from to reduce contention on the extent
state tree. But it is buggy because the code that retries a read from
a different copy of the block is going to find the uptodate state bits
set and skip the IO.
The end result of the bug is that we'll never actually read the good
copy (if there is one).
The fix here is to always clear the uptodate state bits, which is safe
because this code is only called when the parent transid fails.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Tue, 21 Feb 2012 03:14:55 +0000 (22:14 -0500)]
Btrfs: add extra sanity checks on the path names in btrfs_mksubvol
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Tue, 21 Feb 2012 01:53:43 +0000 (20:53 -0500)]
Btrfs: make sure we update latest_bdev
When we are setting up the mount, we close all the
devices that were not actually part of the metadata we found.
But, we don't make sure that one of those devices wasn't
fs_devices->latest_bdev, which means we can do a use after free
on the one we closed.
This updates latest_bdev as it goes.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Mon, 20 Feb 2012 13:40:56 +0000 (08:40 -0500)]
Btrfs: improve error handling for btrfs_insert_dir_item callers
This allows us to gracefully continue if we aren't able to insert
directory items, both for normal files/dirs and snapshots.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Nikolaus Schulz [Wed, 22 Feb 2012 22:18:44 +0000 (23:18 +0100)]
hwmon: (f75375s) Fix register write order when setting fans to full speed
By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan
to full speed. In the f75375s driver, this need be done by enabling
manual fan control, plus duty mode for the
F875387 chip, and then setting
the maximum duty cycle. Fix a bug where the two necessary register writes
were swapped, effectively discarding the setting to full-speed.
Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Guenter Roeck [Wed, 22 Feb 2012 16:13:52 +0000 (08:13 -0800)]
hwmon: (ads1015) Fix file leak in probe function
An error while creating sysfs attribute files in the driver's probe function
results in an error abort, but already created files are not removed. This patch
fixes the problem.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org # 3.0+
Cc: Dirk Eibach <eibach@gdsys.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
David Smith [Tue, 7 Feb 2012 16:11:05 +0000 (10:11 -0600)]
tracepoint, vfs, sched: Add exec() tracepoint
Added a minimal exec tracepoint. Exec is an important major event
in the life of a task, like fork(), clone() or exit(), all of
which we already trace.
[ We also do scheduling re-balancing during exec() - so it's useful
from a scheduler instrumentation POV as well. ]
If you want to watch a task start up, when it gets exec'ed is a good place
to start. With the addition of this tracepoint, exec's can be monitored
and better picture of general system activity can be obtained. This
tracepoint will also enable better process life tracking, allowing you to
answer questions like "what process keeps starting up binary X?".
This tracepoint can also be useful in ftrace filtering and trigger
conditions: i.e. starting or stopping filtering when exec is called.
Signed-off-by: David Smith <dsmith@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F314D19.7030504@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Doug Ledford [Mon, 20 Feb 2012 17:19:03 +0000 (12:19 -0500)]
mlx4_core: Exported functions can't be static
At least on powerpc, it breaks the build if exported functions are
static. Fix some static exported functions introduced with the mlx4
SR-IOV support added in 3.3-rc1.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
David S. Miller [Thu, 23 Feb 2012 05:20:14 +0000 (00:20 -0500)]
Merge branch 'nf' of git://1984.lsi.us.es/net
Linus Torvalds [Wed, 22 Feb 2012 21:00:53 +0000 (13:00 -0800)]
Merge tag 'usb-3.3-rc4' of git://git./linux/kernel/git/gregkh/usb
USB bugfixes for 3.3-rc4
A number of new device ids, and a cleanup/fix for some of the option
device ids that shouldn't have been added in the first place.
There's also a few USB 3 fixes for problems that people have reported,
and a usb-storage bugfix to round it out.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'usb-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Added Kamstrup VID/PIDs to cp210x serial driver.
USB: Serial: ti_usb_3410_5052: Add Abbot Diabetes Care cable id
usb-storage: fix freezing of the scanning thread
xhci: Fix encoding for HS bulk/control NAK rate.
USB: Set hub depth after USB3 hub reset
USB: Fix handoff when BIOS disables host PCI device.
USB: option: cleanup zte 3g-dongle's pid in option.c
USB: Don't fail USB3 probe on missing legacy PCI IRQ.
xhci: Fix oops caused by more USB2 ports than USB3 ports.
USB: Remove duplicate USB 3.0 hub feature #defines.
This page took 0.051915 seconds and 5 git commands to generate.