NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)] 
md/multipath: add rcu protection to rdev access in multipath_status.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid5: add rcu protection to rdev accesses in raid5_status.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid5: add rcu protection to rdev accesses in want_replace
Being in the middle of resync is no longer protection against failed
rdevs disappearing. So add rcu protection.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid5: add rcu protection to rdev accesses in handle_failed_sync.
The rdev could be freed while handle_failed_sync is running, so
rcu protection is needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid1: add rcu protection to rdev in fix_read_error
Since remove_and_add_spares() was added to hot_remove_disk() it has
been possible for an rdev to be hot-removed while fix_read_error()
was running, so we need to be more careful, and take a reference to
the rdev while performing IO.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid1: small code cleanup in end_sync_write
'mirror' is only used to find 'rdev', several times.
So just find 'rdev' once, and use it instead.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid1: small cleanup in raid1_end_read/write_request
Both functions use conf->mirrors[mirror].rdev several times, so
improve readability by storing this in a local variable.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid10: simplify print_conf a little.
'tmp' is only ever used to extract 'tmp->rdev', so just use 'rdev' directly.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid10: minor code improvement in fix_read_error()
rdev already holds conf->mirrors[d].rdev, so no need to load it again.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid10: add rcu protection to rdev access during reshape.
mirrors[].rdev can become NULL at any point unless:
- a counted reference is held
- ->reconfig_mutex is held, or
- rcu_read_lock() is held
Reshape isn't always suitably careful as in the past rdev couldn't be
removed during reshape. It can now, so add protection.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid10: add rcu protection to rdev access in raid10_sync_request.
mirrors[].rdev can become NULL at any point unless:
- a counted reference is held
- ->reconfig_mutex is held, or
- rcu_read_lock() is held
Previously they could not become NULL during a resync/recovery/reshape either.
However when remove_and_add_spares() was added to hot_remove_disk(), that
changed.
So raid10_sync_request didn't previously need to protect rdev access,
but now it does.
Fix missed check(Shaohua)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid10: add rcu protection in raid10_status.
mirrors[].rdev can become NULL at any point unless:
- a counted reference is held
- ->reconfig_mutex is held, or
- rcu_read_lock() is held
raid10_status holds none of these. So add rcu_read_lock()
protection.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid10: fix refounct imbalance when resyncing an array with a replacement device.
If you have a raid10 with a replacement device that is resyncing -
e.g. after a crash before the replacement was complete - the write to
the replacement will increment nr_pending on the wrong device, which
will lead to strangeness.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md/raid1, raid10: don't recheck "Faulty" flag in read-balance.
Re-checking the faulty flag here brings no value.
The comment about "risk" refers to the risk that the device could
be in the process of being removed by ->hot_remove_disk().
However providing that the ->nr_pending count is incremented inside
an rcu_read_locked() region, there is no risk of that happening.
This is because the rdev pointer (in the personalities array) is set
to NULL before synchronize_rcu(), and ->nr_pending is tested
afterwards. If the rcu_read_locked region happens before the
synchronize_rcu(), the test will see that nr_pending has been incremented.
If it happens afterwards, the rdev pointer will be NULL so there is nothing
to increment.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
NeilBrown [Thu, 2 Jun 2016 06:19:52 +0000 (16:19 +1000)]
md: disconnect device from personality before trying to remove it.
When the HOT_REMOVE_DISK ioctl is used to remove a device, we
call remove_and_add_spares() which will remove it from the personality
if possible. This improves the chances that the removal will succeed.
When writing "remove" to dev-XX/state, we don't. So that can fail more easily.
So add the remove_and_add_spares() into "remove" handling.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Tomasz Majchrzak [Mon, 13 Jun 2016 13:51:19 +0000 (15:51 +0200)] 
raid1/raid10: slow down resync if there is non-resync activity pending
A performance drop of mkfs has been observed on RAID10 during resync
since commit
09314799e4f0 ("md: remove 'go_faster' option from
->sync_request()"). Resync sends so many IOs it slows down non-resync
IOs significantly (few times). Add a short delay to a resync. The
previous long sleep (1s) has proven unnecessary, even very short delay
brings performance right.
The change also applied to raid1. The problem has not been observed on
raid1, however it shares barriers code with raid10 so it might be an
issue for some setup too.
Suggested-by: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20160609134555.GA9104@proton.igk.intel.com
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Xiao Ni [Sun, 12 Jun 2016 09:18:00 +0000 (17:18 +0800)] 
MD:Update superblock when err == 0 in size_store
This is a simple check before updating the superblock. It should update
the superblock when update_size return 0.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Cong Wang [Wed, 8 Jun 2016 16:20:16 +0000 (09:20 -0700)] 
md: use a mutex to protect a global list
We saw a list corruption in the list all_detected_devices:
WARNING: CPU: 16 PID: 226 at lib/list_debug.c:29 __list_add+0x3c/0xa9()
list_add corruption. next->prev should be prev (
ffff880859d58320), but was
ffff880859ce74c0. (next=
ffffffff81abfdb0).
Modules linked in: ahci libahci libata sd_mod scsi_mod
CPU: 16 PID: 226 Comm: kworker/u241:4 Not tainted 4.1.20 #1
Hardware name: Dell Inc. PowerEdge C6220/04GD66, BIOS 2.2.3 11/07/2013
Workqueue: events_unbound async_run_entry_fn
0000000000000000 ffff880859a5baf8 ffffffff81502872 ffff880859a5bb48
0000000000000009 ffff880859a5bb38 ffffffff810692a5 ffff880859ee8828
ffffffff812ad02c ffff880859d58320 ffffffff81abfdb0 ffff880859eb90c0
Call Trace:
[<
ffffffff81502872>] dump_stack+0x4d/0x63
[<
ffffffff810692a5>] warn_slowpath_common+0xa1/0xbb
[<
ffffffff812ad02c>] ? __list_add+0x3c/0xa9
[<
ffffffff81069305>] warn_slowpath_fmt+0x46/0x48
[<
ffffffff812ad02c>] __list_add+0x3c/0xa9
[<
ffffffff81406f28>] md_autodetect_dev+0x41/0x62
[<
ffffffff81285862>] rescan_partitions+0x25f/0x29d
[<
ffffffff81506372>] ? mutex_lock+0x13/0x31
[<
ffffffff811a090f>] __blkdev_get+0x1aa/0x3cd
[<
ffffffff811a0b91>] blkdev_get+0x5f/0x294
[<
ffffffff81377ceb>] ? put_device+0x17/0x19
[<
ffffffff8128227c>] ? disk_put_part+0x12/0x14
[<
ffffffff812836f3>] add_disk+0x29d/0x407
[<
ffffffff81384345>] ? __pm_runtime_use_autosuspend+0x5c/0x64
[<
ffffffffa004a724>] sd_probe_async+0x115/0x1af [sd_mod]
[<
ffffffff81083177>] async_run_entry_fn+0x72/0x12c
[<
ffffffff8107c44c>] process_one_work+0x198/0x2ce
[<
ffffffff8107cac7>] worker_thread+0x1dd/0x2bb
[<
ffffffff8107c8ea>] ? cancel_delayed_work_sync+0x15/0x15
[<
ffffffff8107c8ea>] ? cancel_delayed_work_sync+0x15/0x15
[<
ffffffff81080d9c>] kthread+0xae/0xb6
[<
ffffffff81080000>] ? param_array_set+0x40/0xfa
[<
ffffffff81080cee>] ? __kthread_parkme+0x61/0x61
[<
ffffffff81508152>] ret_from_fork+0x42/0x70
[<
ffffffff81080cee>] ? __kthread_parkme+0x61/0x61
I suspect it is because there is no lock protecting this
global list, autostart_arrays() is called in ioctl() path
where there is no lock.
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Guoqing Jiang [Fri, 3 Jun 2016 03:32:05 +0000 (23:32 -0400)] 
md: simplify the code with md_kick_rdev_from_array
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Guoqing Jiang [Fri, 3 Jun 2016 03:32:04 +0000 (23:32 -0400)]
md-cluster: fix deadlock issue when add disk to an recoverying array
Add a disk to an array which is performing recovery
is a little complicated, we need to do both reap the
sync thread and perform add disk for the case, then
it caused deadlock as follows.
linux44:~ # ps aux|grep md|grep D
root 1822 0.0 0.0 0 0 ? D 16:50 0:00 [md127_resync]
root 1848 0.0 0.0 19860 952 pts/0 D+ 16:50 0:00 mdadm --manage /dev/md127 --re-add /dev/vdb
linux44:~ # cat /proc/1848/stack
[<
ffffffff8107afde>] kthread_stop+0x6e/0x120
[<
ffffffffa051ddb0>] md_unregister_thread+0x40/0x80 [md_mod]
[<
ffffffffa0526e45>] md_reap_sync_thread+0x15/0x150 [md_mod]
[<
ffffffffa05271e0>] action_store+0x260/0x270 [md_mod]
[<
ffffffffa05206b4>] md_attr_store+0xb4/0x100 [md_mod]
[<
ffffffff81214a7e>] sysfs_write_file+0xbe/0x140
[<
ffffffff811a6b98>] vfs_write+0xb8/0x1e0
[<
ffffffff811a75b8>] SyS_write+0x48/0xa0
[<
ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b
[<
00007f068ea1ed30>] 0x7f068ea1ed30
linux44:~ # cat /proc/1822/stack
[<
ffffffffa05251a6>] md_do_sync+0x846/0xf40 [md_mod]
[<
ffffffffa052402d>] md_thread+0x16d/0x180 [md_mod]
[<
ffffffff8107ad94>] kthread+0xb4/0xc0
[<
ffffffff8152a518>] ret_from_fork+0x58/0x90
Task1848 Task1822
md_attr_store (held reconfig_mutex by call mddev_lock())
action_store
md_reap_sync_thread
md_unregister_thread
kthread_stop md_wakeup_thread(mddev->thread);
wait_event(mddev->sb_wait, !test_bit(MD_CHANGE_PENDING))
md_check_recovery is triggered by wakeup mddev->thread,
but it can't clear MD_CHANGE_PENDING flag since it can't
get lock which was held by md_attr_store already.
To solve the deadlock problem, we move "->resync_finish()"
from md_do_sync to md_reap_sync_thread (after md_update_sb),
also MD_HELD_RESYNC_LOCK is introduced since it is possible
that node can't get resync lock in md_do_sync.
Then we do not need to wait for MD_CHANGE_PENDING is cleared
or not since metadata should be updated after md_update_sb,
so just call resync_finish if MD_HELD_RESYNC_LOCK is set.
We also unified the code after skip label, since set PENDING
for non-clustered case should be harmless.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Song Liu [Tue, 24 May 2016 00:25:06 +0000 (17:25 -0700)] 
right meaning of PARITY_ENABLE_RMW and PARITY_PREFER_RMW
In current handle_stripe_dirtying, the code prefers rmw with
PARITY_ENABLE_RMW; while prefers rcw with PARITY_PREFER_RMW.
This patch reverses this behavior.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Linus Torvalds [Thu, 26 May 2016 00:37:33 +0000 (17:37 -0700)] 
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: EFI, entry code, pkeys and MPX fixes, TASK_SIZE cleanups
and a tsc frequency table fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Switch from TASK_SIZE to TASK_SIZE_MAX in the page fault code
x86/fsgsbase/64: Use TASK_SIZE_MAX for FSBASE/GSBASE upper limits
x86/mm/mpx: Work around MPX erratum SKD046
x86/entry/64: Fix stack return address retrieval in thunk
x86/efi: Fix 7-parameter efi_call()s
x86/cpufeature, x86/mm/pkeys: Fix broken compile-time disabling of pkeys
x86/tsc: Add missing Cherrytrail frequency to the table
Linus Torvalds [Thu, 26 May 2016 00:11:43 +0000 (17:11 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two fixes: one for a lost wakeup, the other to fix the compiler
optimizing out preempt operations on ARM64 (and possibly other non-x86
architectures)"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix remote wakeups
sched/preempt: Fix preempt_count manipulations
Linus Torvalds [Thu, 26 May 2016 00:05:40 +0000 (17:05 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Mostly tooling and PMU driver fixes, but also a number of late updates
such as the reworking of the call-chain size limiting logic to make
call-graph recording more robust, plus tooling side changes for the
new 'backwards ring-buffer' extension to the perf ring-buffer"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
perf record: Read from backward ring buffer
perf record: Rename variable to make code clear
perf record: Prevent reading invalid data in record__mmap_read
perf evlist: Add API to pause/resume
perf trace: Use the ptr->name beautifier as default for "filename" args
perf trace: Use the fd->name beautifier as default for "fd" args
perf report: Add srcline_from/to branch sort keys
perf evsel: Record fd into perf_mmap
perf evsel: Add overwrite attribute and check write_backward
perf tools: Set buildid dir under symfs when --symfs is provided
perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced
perf annotate: Sort list of recognised instructions
perf annotate: Fix identification of ARM blt and bls instructions
perf tools: Fix usage of max_stack sysctl
perf callchain: Stop validating callchains by the max_stack sysctl
perf trace: Fix exit_group() formatting
perf top: Use machine->kptr_restrict_warned
perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1
perf machine: Do not bail out if not managing to read ref reloc symbol
perf/x86/intel/p4: Trival indentation fix, remove space
...
Linus Torvalds [Wed, 25 May 2016 23:52:19 +0000 (16:52 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull objtool build fix from Ingo Molnar:
"An libtool fix for older libelf versions"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Allow building with older libelf
Linus Torvalds [Wed, 25 May 2016 22:59:09 +0000 (15:59 -0700)]
Merge branch 'work.iov_iter' of git://git./linux/kernel/git/viro/vfs
Pull vfs iov_iter regression fix from Al Viro:
"Fix for braino in 'fold checks into iterate_and_advance()'"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do "fold checks into iterate_and_advance()" right
Linus Torvalds [Wed, 25 May 2016 22:54:35 +0000 (15:54 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs xattr regression fixes from Al Viro.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make xattr_resolve_handlers() safe to use with NULL ->s_xattr
xattr: Fail with -EINVAL for NULL attribute names
Linus Torvalds [Wed, 25 May 2016 22:38:56 +0000 (15:38 -0700)]
Merge tag 'acpi-4.7-rc1-more' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Additional ACPI update for v4.7-rc1
Just one fix for incorrect async_synchronize_cookie() usage in the
ACPI battery driver (Chris Wilson)"
* tag 'acpi-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Correctly serialise with the pending async probe
Linus Torvalds [Wed, 25 May 2016 22:29:21 +0000 (15:29 -0700)]
Merge tag 'pm-4.7-rc1-more' of git://git./linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are two stable-candidate fixes (PM core, cpuidle) and a bunch of
cpufreq cleanups.
Specifics:
- Stable-candidate cpuidle fix to make it check the right variable
when deciding whether or not to enable interrupts on the local CPU
so as to avoid enabling iterrupts too early in some cases if the
system has both coupled and per-core idle states (Daniel Lezcano).
- Stable-candidate PM core fix to make it handle failures at the
"late suspend" stage of device suspend consistently for all devices
regardless of whether or not async suspend/resume is enabled for
them (Rafael Wysocki).
- Cleanups in the cpufreq core, the schedutil governor and the
intel_pstate driver (Rafael Wysocki, Pankaj Gupta, Viresh Kumar)"
* tag 'pm-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: Handle failures in device_suspend_late() consistently
cpufreq: schedutil: Improve prints messages with pr_fmt
cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()
cpufreq: simplified goto out in cpufreq_register_driver()
cpufreq: governor: CPUFREQ_GOV_STOP never fails
cpufreq: governor: CPUFREQ_GOV_POLICY_EXIT never fails
intel_pstate: Simplify conditional in intel_pstate_set_policy()
Al Viro [Wed, 25 May 2016 21:36:19 +0000 (17:36 -0400)] 
do "fold checks into iterate_and_advance()" right
the only case when we should skip the iterate_and_advance() guts
is when nothing's left in the iterator, _not_ just when requested
amount is 0. Said guts will do nothing in the latter case anyway;
the problem we tried to deal with in the aforementioned commit is
that when there's nothing left *and* the amount requested is 0,
we might end up deferencing one iovec too many; the value we fetch
from there is discarded in that case, but theoretically it might
oops if the iovec array ends exactly at the end of page with the
next page not mapped.
Bailing out on zero size requested had an unexpected side effect -
zero-length segment in the beginning of iovec array ended up
throwing do_loop_readv_writev() into infinite spin; we do not
advance past the empty segment at all. Reproducer is trivial:
echo '#include <sys/uio.h>' >a.c
echo 'main() {char c; struct iovec v[] = {{&c,0},{&c,1}}; readv(0,v,2);}' >>a.c
cc a.c && ./a.out </proc/uptime
which should end up with the process not hanging. Probably ought to
go into LTP or xfstests...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 25 May 2016 21:34:41 +0000 (17:34 -0400)]
make xattr_resolve_handlers() safe to use with NULL ->s_xattr
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andreas Gruenbacher [Mon, 9 May 2016 11:28:49 +0000 (13:28 +0200)] 
xattr: Fail with -EINVAL for NULL attribute names
Commit
98e9cb57 improved the xattr name checks in xattr_resolve_name but
didn't update the NULL attribute name check appropriately, so NULL
attribute names lead to NULL pointer dereferences. Turn that into
-EINVAL results instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
fs/xattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rafael J. Wysocki [Wed, 25 May 2016 20:11:28 +0000 (22:11 +0200)] 
Merge branch 'acpi-battery'
* acpi-battery:
ACPI / battery: Correctly serialise with the pending async probe
Rafael J. Wysocki [Wed, 25 May 2016 19:54:45 +0000 (21:54 +0200)]
Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-core'
* pm-cpufreq:
cpufreq: schedutil: Improve prints messages with pr_fmt
cpufreq: simplified goto out in cpufreq_register_driver()
cpufreq: governor: CPUFREQ_GOV_STOP never fails
cpufreq: governor: CPUFREQ_GOV_POLICY_EXIT never fails
intel_pstate: Simplify conditional in intel_pstate_set_policy()
* pm-cpuidle:
cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()
* pm-core:
PM / sleep: Handle failures in device_suspend_late() consistently
Linus Torvalds [Wed, 25 May 2016 17:40:15 +0000 (10:40 -0700)]
Merge tag 'pwm/for-4.7-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes introduces an atomic API to the PWM subsystem.
This is influenced by the DRM atomic API that was introduced a while
back, though it is obviously a lot simpler. The fundamental idea
remains the same, though: drivers provide a single callback to
implement the atomic configuration of a PWM channel.
As a side-effect the PWM subsystem gains the ability for initial state
retrieval, so that the logical state mirrors that of the hardware.
Many use-cases don't care about this, but for others it is essential.
These new features require changes in all users, which these patches
take care of. The core is transitioned to use the atomic callback if
available and provides a fallback mechanism for other drivers.
Changes to transition users and drivers to the atomic API are
postponed to v4.8"
* tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
pwm: Add information about polarity, duty cycle and period to debugfs
pwm: Switch to the atomic API
pwm: Update documentation
pwm: Add core infrastructure to allow atomic updates
pwm: Add hardware readout infrastructure
pwm: Move the enabled/disabled info into pwm_state
pwm: Introduce the pwm_state concept
pwm: Keep PWM state in sync with hardware state
ARM: Explicitly apply PWM config extracted from pwm_args
drm: i915: Explicitly apply PWM config extracted from pwm_args
input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args
input: misc: max8997: Explicitly apply PWM config extracted from pwm_args
backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
backlight: lp855x: Explicitly apply PWM config extracted from pwm_args
backlight: lp8788: Explicitly apply PWM config extracted from pwm_args
backlight: pwm_bl: Use pwm_get_args() where appropriate
fbdev: ssd1307fb: Use pwm_get_args() where appropriate
regulator: pwm: Use pwm_get_args() where appropriate
leds: pwm: Use pwm_get_args() where appropriate
input: misc: max77693: Use pwm_get_args() where appropriate
...
Linus Torvalds [Wed, 25 May 2016 17:19:17 +0000 (10:19 -0700)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add support for Fintek F81865 Super-IO chip
- add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based
SoCs from Renesas
- octeon: Handle the FROZEN hot plug notifier actions
- f71808e_wdt fixes and cleanups
- some small improvements in code and documentation
* git://www.linux-watchdog.org/linux-watchdog:
MAINTAINERS: Add file patterns for watchdog device tree bindings
Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry
watchdog: shwdt: Use setup_timer()
watchdog: cpwd: Use setup_timer()
arm64: defconfig: enable Renesas Watchdog Timer
watchdog: renesas-wdt: add driver
watchdog: remove error message when unable to allocate watchdog device
watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
watchdog: f71808e_wdt: Fix typo
watchdog: f71808e_wdt: Add F81865 support
watchdog: sp5100_tco: properly check for new register layouts
watchdog: core: Fix circular locking dependency
watchdog: core: fix trivial typo in a comment
watchdog: hpwdt: Adjust documentation to match latest kernel module parameters.
watchdog: imx2_wdt: add external reset support via dt prop
watchdog: octeon: Handle the FROZEN hot plug notifier actions.
watchdog: qcom: Report reboot reason
Linus Torvalds [Wed, 25 May 2016 16:47:26 +0000 (09:47 -0700)]
Merge tag 'vfio-v4.7-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Hide INTx on certain known broken devices (Alex Williamson)
- Additional backdoor reset detection (Alex Williamson)
- Remove unused iommudata reference (Alexey Kardashevskiy)
- Use cfg_size to avoid probing extended config space (Alexey
Kardashevskiy)
* tag 'vfio-v4.7-rc1' of git://github.com/awilliam/linux-vfio:
vfio_pci: Test for extended capabilities if config space > 256 bytes
vfio_iommu_spapr_tce: Remove unneeded iommu_group_get_iommudata
vfio/pci: Add test for BAR restore
vfio/pci: Hide broken INTx support from user
Linus Torvalds [Wed, 25 May 2016 16:37:50 +0000 (09:37 -0700)]
Merge tag 'drm-4.7-rc1-headers-fix' of git://people.freedesktop.org/~airlied/linux
Pull header warning fix from Dave Airlie:
"Here is the C++ guards warning fix from Arnd"
[ Background: there are 'extern "C" { }' guards in include/uapi for the
GPU headers.
They should arguably be wrapped somehow, but as it is they caused
checkpatch to warn because it would trigger on the 'extern' and think
it's exporting a function or variable from the kernel to user space.
This just fixes checkpatch. Whether we wrap the C++ guards some way
in the future will be an independent issue. ]
* tag 'drm-4.7-rc1-headers-fix' of git://people.freedesktop.org/~airlied/linux:
headers_check: don't warn about c++ guards
Linus Torvalds [Wed, 25 May 2016 16:27:52 +0000 (09:27 -0700)]
Merge branch 'parisc-4.7-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Add native high-resolution timing code for sched_clock() and other
timing functions based on the processor internal cr16 cycle counters
- Add syscall tracepoint support
- Add regset support
- Speed up get_user() and put_user() functions
- Updated futex.h to match generic implementation (John David Anglin)
- A few smaller ftrace build fixes
- Fixed thuge-gen kernel self test to utilize architectured MAP_HUGETLB
value
- Added parisc architecture to seccomp_bpf kernel self test
- Various typo fixes (Andrea Gelmini)
* 'parisc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Whitespace cleanups in unistd.h
parisc: Use long jump to reach ftrace_return_to_handler()
parisc: Fix typo in fpudispatch.c
parisc: Fix typos in eisa_eeprom.h
parisc: Fix typo in ldcw.h
parisc: Fix typo in pdc.h
parisc: Update futex.h to match generic implementation
parisc: Merge ftrace C-helper and assembler functions into .text.hot section
selftests/thuge-gen: Use platform specific MAP_HUGETLB value
parisc: Add native high-resolution sched_clock() implementation
parisc: Add ARCH_TRACEHOOK and regset support
parisc: Add 64bit get_user() and put_user() for 32bit kernel
parisc: Simplify and speed up get_user() and put_user()
parisc: Add syscall tracepoint support
Helge Deller [Wed, 25 May 2016 13:40:49 +0000 (15:40 +0200)] 
parisc: Whitespace cleanups in unistd.h
Clean up whitespaces and mark unused syscalls as such.
Signed-off-by: Helge Deller <deller@gmx.de>
Peter Zijlstra [Mon, 23 May 2016 09:19:07 +0000 (11:19 +0200)] 
sched/core: Fix remote wakeups
Commit:
b5179ac70de8 ("sched/fair: Prepare to fix fairness problems on migration")
... introduced a bug: Mike Galbraith found that it introduced a
performance regression, while Paul E. McKenney reported lost
wakeups and bisected it to this commit.
The reason is that I mis-read ttwu_queue() such that I assumed any
wakeup that got a remote queue must have had the task migrated.
Since this is not so; we need to transfer this information between
queueing the wakeup and actually doing the wakeup. Use a new
task_struct::sched_flag for this, we already write to
sched_contributes_to_load in the wakeup path so this is a hot and
modified cacheline.
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Hunter <ahh@google.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ben Segall <bsegall@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Turner <pjt@google.com>
Cc: Pavan Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: byungchul.park@lge.com
Fixes: b5179ac70de8 ("sched/fair: Prepare to fix fairness problems on migration")
Link: http://lkml.kernel.org/r/20160523091907.GD15728@worktop.ger.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Tue, 24 May 2016 22:50:58 +0000 (15:50 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a first set of bug fixes on top of what was merged for 4.7.
Two patches for lpc32xx address a harmless build warning that was just
introduced, one patch for the mediatek soc driver fixes a warning for
arm64, and the pxa changes are minor cleanups that should have been
part of the original pull requests but that I forgot to apply to the
cleanup-fixes branch earlier"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: lpc32xx: fix NR_IRQS confict
ARM: lpc32xx: remove legacy irq controller driver
soc: mtk-pmic-wrap: avoid integer overflow warning
ARM: pxa: Remove CLK_IS_ROOT
ARM: pxa: activate pinctrl for device-tree machines
Linus Torvalds [Tue, 24 May 2016 22:46:06 +0000 (15:46 -0700)]
Merge tag 'armsoc-late' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC late DT updates from Arnd Bergmann:
"This is a collection of a few late fixes and other misc stuff that had
dependencies on things being merged from other trees.
The Renesas R-Car power domain handling, and the Nvidia Tegra USB
support both hand notable changes that required changing the DT
binding in a way that only provides compatibility with old DT blobs on
new kernels but not vice versa. As a consequence, the DT changes are
based on top of the driver changes and are now in this branch.
For NXP i.MX and Samsung Exynos, the changes in here depend on other
changes that got merged through the clk maintainer tree"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC
ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC
ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3
ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3
ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato
ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes
ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210
ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12
ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12
ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250
ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk
ARM: dts: exynos: Add DMC bus node for Exynos3250
ARM: tegra: Enable XUSB on Nyan
ARM: tegra: Enable XUSB on Jetson TK1
ARM: tegra: Enable XUSB on Venice2
ARM: tegra: Add Tegra124 XUSB controller
ARM: tegra: Move Tegra124 to the new XUSB pad controller binding
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
...
Linus Torvalds [Tue, 24 May 2016 22:24:37 +0000 (15:24 -0700)]
Merge tag 'asm-generic-4.7' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanup from Arnd Bergmann:
"I have only one patch for asm-generic in this release, this one is
from James Hogan and updates the generic system call table for
renameat2 so we don't need to provide both renameat and renameat2 in
newly added architectures"
* tag 'asm-generic-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Drop renameat syscall from default list
Linus Torvalds [Tue, 24 May 2016 21:39:20 +0000 (14:39 -0700)]
Merge tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"A very quiet cycle for nfsd, mainly just an RDMA update from Chuck
Lever"
* tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux:
sunrpc: fix stripping of padded MIC tokens
svcrpc: autoload rdma module
svcrdma: Generalize svc_rdma_xdr_decode_req()
svcrdma: Eliminate code duplication in svc_rdma_recvfrom()
svcrdma: Drain QP before freeing svcrdma_xprt
svcrdma: Post Receives only for forward channel requests
svcrdma: Remove superfluous line from rdma_read_chunks()
svcrdma: svc_rdma_put_context() is invoked twice in Send error path
svcrdma: Do not add XDR padding to xdr_buf page vector
svcrdma: Support IPv6 with NFS/RDMA
nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid
Remove unnecessary allocation
Linus Torvalds [Tue, 24 May 2016 19:55:26 +0000 (12:55 -0700)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Fix a number of bugs, most notably a potential stale data exposure
after a crash and a potential BUG_ON crash if a file has the data
journalling flag enabled while it has dirty delayed allocation blocks
that haven't been written yet. Also fix a potential crash in the new
project quota code and a maliciously corrupted file system.
In addition, fix some DAX-specific bugs, including when there is a
transient ENOSPC situation and races between writes via direct I/O and
an mmap'ed segment that could lead to lost I/O.
Finally the usual set of miscellaneous cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: pre-zero allocated blocks for DAX IO
ext4: refactor direct IO code
ext4: fix race in transient ENOSPC detection
ext4: handle transient ENOSPC properly for DAX
dax: call get_blocks() with create == 1 for write faults to unwritten extents
ext4: remove unmeetable inconsisteny check from ext4_find_extent()
jbd2: remove excess descriptions for handle_s
ext4: remove unnecessary bio get/put
ext4: silence UBSAN in ext4_mb_init()
ext4: address UBSAN warning in mb_find_order_for_block()
ext4: fix oops on corrupted filesystem
ext4: fix check of dqget() return value in ext4_ioctl_setproject()
ext4: clean up error handling when orphan list is corrupted
ext4: fix hang when processing corrupted orphaned inode list
ext4: remove trailing \n from ext4_warning/ext4_error calls
ext4: fix races between changing inode journal mode and ext4_writepages
ext4: handle unwritten or delalloc buffers before enabling data journaling
ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart()
ext4: do not ask jbd2 to write data for delalloc buffers
jbd2: add support for avoiding data writes during transaction commits
...
Arnd Bergmann [Thu, 19 May 2016 08:31:31 +0000 (10:31 +0200)] 
ARM: lpc32xx: fix NR_IRQS confict
With the change to sparse IRQs, the lpc32xx platform gets a warning about
conflicting macros:
In file included from arch/arm/mach-lpc32xx/irq.c:31:0:
arch/arm/mach-lpc32xx/include/mach/irqs.h:115:0: warning: "NR_IRQS" redefined
#define NR_IRQS 96
arch/arm/include/asm/irq.h:9:0: note: this is the location of the previous definition
#define NR_IRQS NR_IRQS_LEGACY
One such instance was in the old irq driver that is now removed by
the previous patch, but any other file including mach/irqs.h still
has the issue. Since none of them use this constant, we can just
remove the old definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8cb17b5ed017 ("irqchip: Add LPC32xx interrupt controller driver")
Vladimir Zapolskiy [Mon, 25 Apr 2016 01:00:44 +0000 (04:00 +0300)] 
ARM: lpc32xx: remove legacy irq controller driver
New NXP LPC32xx irq chip driver is used instead of a legacy one.
[this also fixes a harmless build warning about the NR_IRQS redefinition]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Tue, 24 May 2016 18:12:32 +0000 (11:12 -0700)]
Merge tag 'spi-v4.7' of git://git./linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Another quiet release for SPI, almost entirely driver specific changes
with the diffstat dominated by two new drivers which are about two
thirds of it in terms of lines of code:
- new drivers for PIC32 standard and SQI controllers
- the Cadence driver has had runtime PM support added and quite a few
fixes and cleanups
- flash-specific accelerated path support now has a feature query
interface
- the pxa2xx driver has been moved to use the core DMA mapping support"
* tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (48 commits)
spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops'
spi: dw-pci: Spelling s/paltforms/platforms/g
spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup
spi: Fix simple typo s/impelment/implement
spi: rockchip: potential NULL dereference on error
spi: zynqmp: disable clocks in error paths
spi: Drop unnecessary dependencies on relaxed I/O accessors
spi: qup: Add spi_master_put in remove function
spi: qup: Handle clocks in pm_runtime suspend and resume
spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths
spi: st-ssc4: Allow compile test build
spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel
spi: davinci: Use dma_request_chan() for requesting DMA channel
spi: pic32: Fix checking return value of devm_ioremap_resource
spi: spi-fsl-dspi: Update DT binding documentation
spi: Drop duplicate code to set master->dev.parent
spi: pic32: Set proper bits_per_word_mask
spi: return error if kmap'd buffers passed to spi_map_buf()
spi: core: add hook flash_read_supported to spi_master
spi: pic32-sqi: silence array overflow warning
...
Linus Torvalds [Tue, 24 May 2016 18:00:20 +0000 (11:00 -0700)]
Merge tag 'for-linus-
20160523' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"First cycle with Boris as NAND maintainer! Many (most) bullets stolen
from him.
Generic:
- Migrated NAND LED trigger to be a generic MTD trigger
NAND:
- Introduction of the "ECC algorithm" concept, to avoid overloading
the ECC mode field too much more
- Replaced the nand_ecclayout infrastructure with something a little
more flexible (finally!) and future proof
- Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
of this into their own tree as well
- Prepare the sunxi NAND driver to receive DMA support
- Handle bitflips in erased pages on GPMI revisions that do not
support this in hardware.
SPI NOR:
- Start using the spi_flash_read() API for SPI drivers that support
it (i.e., SPI drivers with special memory-mapped flash modes)
And other small scattered improvments"
* tag 'for-linus-
20160523' of git://git.infradead.org/linux-mtd: (155 commits)
mtd: spi-nor: support GigaDevice gd25lq64c
mtd: nand_bch: fix spelling of "probably"
mtd: brcmnand: respect ECC algorithm set by NAND subsystem
gpmi-nand: Handle ECC Errors in erased pages
Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
mtd: nand: add support for "nand-ecc-algo" DT property
mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
mtd: nand: read ECC algorithm from the new field
mtd: nand: fsmc: validate ECC setup by checking algorithm directly
mtd: nand: set ECC algorithm to Hamming on fallback
staging: mt29f_spinand: set ECC algorithm explicitly
CRIS v32: nand: set ECC algorithm explicitly
mtd: nand: atmel: set ECC algorithm explicitly
mtd: nand: davinci: set ECC algorithm explicitly
mtd: nand: bf5xx: set ECC algorithm explicitly
mtd: nand: omap2: Fix high memory dma prefetch transfer
mtd: nand: omap2: Start dma request before enabling prefetch
mtd: nandsim: add __init attribute
mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
...
Linus Torvalds [Tue, 24 May 2016 17:22:34 +0000 (10:22 -0700)]
Merge tag 'for-linus-4.7-rc0-tag' of git://git./linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel.
* tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: use same main loop for counting and remapping pages
xen/events: Don't move disabled irqs
xen/x86: actually allocate legacy interrupts on PV guests
Xen: don't warn about 2-byte wchar_t in efi
xen/gntdev: reduce copy batch size to 16
xen/x86: don't lose event interrupts
Linus Torvalds [Tue, 24 May 2016 16:46:45 +0000 (09:46 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Looks like a quiet cycle for virtio. There's a new inorder option for
the ringtest tool, and a bugfix for balloon for ppc platforms when
using virtio 1 mode"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
ringtest: pass buf != NULL
virtio_balloon: fix PFN format for virtio-1
virtio: add inorder option
Linus Torvalds [Tue, 24 May 2016 16:41:46 +0000 (09:41 -0700)]
Merge tag 'nios2-v4.7' of git://git./linux/kernel/git/lftan/nios2
Pull nios2 update from Ley Foon Tan:
- add order-only DTC dependency to %.dtb target
- fix libgcc location detection
* tag 'nios2-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: Add order-only DTC dependency to %.dtb target
nios2: Fix libgcc location detection
Linus Torvalds [Tue, 24 May 2016 16:19:38 +0000 (09:19 -0700)]
Merge tag 'microblaze-4.7-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze updates from Michal Simek:
- Wire-up new syscalls
- Fix link error
* tag 'microblaze-4.7-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: pci: export isa_io_base to fix link errors
microblaze: Wire up userfaultfd, membarrier, mlock2 syscalls
Juergen Gross [Wed, 18 May 2016 14:44:54 +0000 (16:44 +0200)] 
xen: use same main loop for counting and remapping pages
Instead of having two functions for cycling through the E820 map in
order to count to be remapped pages and remap them later, just use one
function with a caller supplied sub-function called for each region to
be processed. This eliminates the possibility of a mismatch between
both loops which showed up in certain configurations.
Suggested-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Ross Lagerwall [Tue, 10 May 2016 15:11:00 +0000 (16:11 +0100)] 
xen/events: Don't move disabled irqs
Commit
ff1e22e7a638 ("xen/events: Mask a moving irq") open-coded
irq_move_irq() but left out checking if the IRQ is disabled. This broke
resuming from suspend since it tries to move a (disabled) irq without
holding the IRQ's desc->lock. Fix it by adding in a check for disabled
IRQs.
The resulting stacktrace was:
kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31!
invalid opcode: 0000 [#1] SMP
Modules linked in: xenfs xen_privcmd ...
CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu
Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016
task:
ffff88003d75ee00 ti:
ffff88003d7bc000 task.ti:
ffff88003d7bc000
RIP: 0010:[<
ffffffff810e26e2>] [<
ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0
RSP: 0018:
ffff88003d7bfc50 EFLAGS:
00010046
RAX:
0000000000000000 RBX:
ffff88003d40ba00 RCX:
0000000000000001
RDX:
0000000000000001 RSI:
0000000000000100 RDI:
ffff88003d40bad8
RBP:
ffff88003d7bfc68 R08:
0000000000000000 R09:
ffff88003d000000
R10:
0000000000000000 R11:
000000000000023c R12:
ffff88003d40bad0
R13:
ffffffff81f3a4a0 R14:
0000000000000010 R15:
00000000ffffffff
FS:
0000000000000000(0000) GS:
ffff88003da00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fd4264de624 CR3:
0000000037922000 CR4:
00000000003406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Stack:
ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0
ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009
0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66
Call Trace:
[<
ffffffff814c8d92>] eoi_pirq+0xb2/0xf0
[<
ffffffff814c8f66>] __startup_pirq+0xe6/0x150
[<
ffffffff814ca659>] xen_irq_resume+0x319/0x360
[<
ffffffff814c7e75>] xen_suspend+0xb5/0x180
[<
ffffffff81120155>] multi_cpu_stop+0xb5/0xe0
[<
ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80
[<
ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140
[<
ffffffff810a94e6>] ? finish_task_switch+0x76/0x220
[<
ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20
[<
ffffffff810a3935>] smpboot_thread_fn+0x105/0x160
[<
ffffffff810a3830>] ? sort_range+0x30/0x30
[<
ffffffff810a0588>] kthread+0xd8/0xf0
[<
ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
[<
ffffffff8182568f>] ret_from_fork+0x3f/0x70
[<
ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Stefano Stabellini [Wed, 20 Apr 2016 13:15:01 +0000 (14:15 +0100)] 
xen/x86: actually allocate legacy interrupts on PV guests
b4ff8389ed14 is incomplete: relies on nr_legacy_irqs() to get the number
of legacy interrupts when actually nr_legacy_irqs() returns 0 after
probe_8259A(). Use NR_IRQS_LEGACY instead.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
CC: stable@vger.kernel.org
Arnd Bergmann [Wed, 11 May 2016 12:47:59 +0000 (14:47 +0200)]
Xen: don't warn about 2-byte wchar_t in efi
The XEN UEFI code has become available on the ARM architecture
recently, but now causes a link-time warning:
ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail
This seems harmless, because the efi code only uses 2-byte
characters when interacting with EFI, so we don't pass on those
strings to elsewhere in the system, and we just need to
silence the warning.
It is not clear to me whether we actually need to build the file
with the -fshort-wchar flag, but if we do, then we should also
pass --no-wchar-size-warning to the linker, to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Fixes: 37060935dc04 ("ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services")
David Vrabel [Mon, 9 May 2016 09:59:48 +0000 (10:59 +0100)] 
xen/gntdev: reduce copy batch size to 16
IOCTL_GNTDEV_GRANT_COPY batches copy operations to reduce the number
of hypercalls. The stack is used to avoid a memory allocation in a
hot path. However, a batch size of 24 requires more than 1024 bytes of
stack which in some configurations causes a compiler warning.
xen/gntdev.c: In function ‘gntdev_ioctl_grant_copy’:
xen/gntdev.c:949:1: warning: the frame size of 1248 bytes is
larger than 1024 bytes [-Wframe-larger-than=]
This is a harmless warning as there is still plenty of stack spare,
but people keep trying to "fix" it. Reduce the batch size to 16 to
reduce stack usage to less than 1024 bytes. This should have minimal
impact on performance.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Stefano Stabellini [Sat, 16 Apr 2016 01:23:00 +0000 (18:23 -0700)]
xen/x86: don't lose event interrupts
On slow platforms with unreliable TSC, such as QEMU emulated machines,
it is possible for the kernel to request the next event in the past. In
that case, in the current implementation of xen_vcpuop_clockevent, we
simply return -ETIME. To be precise the Xen returns -ETIME and we pass
it on. However the result of this is a missed event, which simply causes
the kernel to hang.
Instead it is better to always ask the hypervisor for a timer event,
even if the timeout is in the past. That way there are no lost
interrupts and the kernel survives. To do that, remove the
VCPU_SSHOTTMR_future flag.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>
Ingo Molnar [Tue, 24 May 2016 05:40:52 +0000 (07:40 +0200)] 
Merge tag 'perf-core-for-mingo-
20160523' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Add "srcline_from" and "srcline_to" branch sort keys to 'perf top' and
'perf report' (Andi Kleen)
Infrastructure changes:
- Make 'perf trace' auto-attach fd->name and ptr->name beautifiers based
on the name of syscall arguments, this way new syscalls that have
'const char * (path,pathname,filename)' will use the fd->name beautifier
(vfs_getname perf probe, if in place) and the 'fd->name' (vfs_getname
or via /proc/PID/fd/) (Arnaldo Carvalho de Melo)
- Infrastructure to read from a ring buffer in backward write mode (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnd Bergmann [Wed, 18 May 2016 16:07:29 +0000 (18:07 +0200)]
headers_check: don't warn about c++ guards
A recent addition to the DRM tree for 4.7 added 'extern "C"' guards
for c++ to all the DRM headers, and that now causes warnings
in 'make headers_check':
usr/include/drm/amdgpu_drm.h:38: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm.h:63: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm.h:699: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm_fourcc.h:30: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm_mode.h:33: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm_sarea.h:38: userspace cannot reference function or variable defined in the kernel
usr/include/drm/exynos_drm.h:21: userspace cannot reference function or variable defined in the kernel
usr/include/drm/i810_drm.h:7: userspace cannot reference function or variable defined in the kernel
This changes the headers_check.pl script to not warn about this.
I'm listing the merge commit as introducing the problem, because
there are several patches in this branch that each do this for
one file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 7c10ddf87472 ("Merge branch 'drm-uapi-extern-c-fixes' of https://github.com/evelikov/linux into drm-next")
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Tue, 24 May 2016 02:42:28 +0000 (19:42 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
- Oleg's "wait/ptrace: assume __WALL if the child is traced". It's a
kernel-based workaround for existing userspace issues.
- A few hotfixes
- befs cleanups
- nilfs2 updates
- sys_wait() changes
- kexec updates
- kdump
- scripts/gdb updates
- the last of the MM queue
- a few other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (84 commits)
kgdb: depends on VT
drm/amdgpu: make amdgpu_mn_get wait for mmap_sem killable
drm/radeon: make radeon_mn_get wait for mmap_sem killable
drm/i915: make i915_gem_mmap_ioctl wait for mmap_sem killable
uprobes: wait for mmap_sem for write killable
prctl: make PR_SET_THP_DISABLE wait for mmap_sem killable
exec: make exec path waiting for mmap_sem killable
aio: make aio_setup_ring killable
coredump: make coredump_wait wait for mmap_sem for write killable
vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
ipc, shm: make shmem attach/detach wait for mmap_sem killable
mm, fork: make dup_mmap wait for mmap_sem for write killable
mm, proc: make clear_refs killable
mm: make vm_brk killable
mm, elf: handle vm_brk error
mm, aout: handle vm_brk failures
mm: make vm_munmap killable
mm: make vm_mmap killable
mm: make mmap_sem for write waits killable for mm syscalls
MAINTAINERS: add co-maintainer for scripts/gdb
...
Linus Torvalds [Tue, 24 May 2016 02:37:41 +0000 (19:37 -0700)]
Merge tag 'linux-kselftest-4.7-rc1' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This update for Kselftest adds:
- a new ftrace testcase
- fixes for ftrace and intel_pstate tests"
* tag 'linux-kselftest-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools: testing: define the _GNU_SOURCE macro
kselftests/ftrace: Add a test case for event pid filtering
kselftests/ftrace: Detect tracefs mount point
Linus Torvalds [Tue, 24 May 2016 02:30:30 +0000 (19:30 -0700)]
Merge tag 'trace-v4.7-3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Reviewing the selftest I recently submitted, I realize that the second
part of it uses my old hack to get the PID of the spawned background
tasks, which doesn't work for all shells, instead of the common use of
$!"
* tag 'trace-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftracetest: Use proper logic to find process PID
Linus Torvalds [Tue, 24 May 2016 02:05:11 +0000 (19:05 -0700)]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile updates from Chris Metcalf:
"This is an even quieter cycle than usual"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
Fix typo
Fix typo
Fix typo
tile: sort the "select" lines in the TILE/TILEGX configs
tile: clarify barrier semantics of atomic_add_return
tile/defconfigs: Remove CONFIG_IPV6_PRIVACY
Linus Torvalds [Tue, 24 May 2016 01:19:21 +0000 (18:19 -0700)]
Merge branch 'for-4.7-dw' of git://git./linux/kernel/git/tj/libata
Pull libata sata_dwc_460ex updates from Tejun Heo:
"Patches to bring sata_dwc_460ex up to snuff.
It was a separate pull request because it depends on dmaengine dw
platform changes which are now in mainline"
* 'for-4.7-dw' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (24 commits)
ata: dwc: add DMADEVICES dependency
powerpc/4xx: Device tree update for the 460ex DWC SATA
ata: sata_dwc_460ex: make debug messages neat
ata: sata_dwc_460ex: supply physical address of FIFO to DMA
ata: sata_dwc_460ex: use devm_ioremap
ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()
ata: sata_dwc_460ex: use readl/writel_relaxed()
ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API
ata: sata_dwc_460ex: add __iomem to register base pointer
ata: sata_dwc_460ex: get rid of incorrect cast
ata: sata_dwc_460ex: get rid of some pointless casts
ata: sata_dwc_460ex: remove empty libata callback
ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
ata: sata_dwc_460ex: get rid of global data
ata: sata_dwc_460ex: add phy support
ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
ata: sata_dwc_460ex: skip dma setup for non-dma commands
ata: sata_dwc_460ex: select only core part of DMA driver
ata: sata_dwc_460ex: DMA is always a flow controller
...
Linus Torvalds [Tue, 24 May 2016 00:53:39 +0000 (17:53 -0700)]
Merge branch 'for-4.7-zac' of git://git./linux/kernel/git/tj/libata
Pull libata ZAC support from Tejun Heo:
"This contains Zone ATA Command support for Shingled Magnetic Recording
devices.
In addition to sending the new commands down to the device, as ZAC
commands depend on getting a lot of responses from the device, piping
up responses is beefed up too. However, it doesn't involve changes to
libata core mechanism or its interaction with upper layers, so I'm not
expecting too many fallouts.
Kudos to Hannes for driving SMR support"
* 'for-4.7-zac' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (28 commits)
libata: support host-aware and host-managed ZAC devices
libata: support device-managed ZAC devices
libata: NCQ encapsulation for ZAC MANAGEMENT OUT
libata: Implement ZBC OUT translation
libata: implement ZBC IN translation
libata: fixup ZAC device disabling
libata-scsi: Generate sense code for disabled devices
libata-trace: decode subcommands
libata: Check log page directory before accessing pages
libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXT
libata: Separate out ata_dev_config_ncq_send_recv()
libata/libsas: Define ATA_CMD_NCQ_NON_DATA
libsas: enable FPDMA SEND/RECEIVE
libata: do not attempt to retrieve sense code twice
libata-scsi: Set information sense field for invalid parameter
libata-scsi: set bit pointer for sense code information
libata-scsi: Set field pointer in sense code
scsi: add scsi_set_sense_field_pointer()
libata: Implement control mode page to select sense format
libata-scsi: generate correct ATA pass-through sense
...
Linus Torvalds [Tue, 24 May 2016 00:26:27 +0000 (17:26 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull more security subsystem updates from James Morris:
"Minor updates for the keys code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
MAINTAINERS: Update keyrings record and add asymmetric keys record
lib: asn1_decoder - add MODULE_LICENSE("GPL")
KEYS: The PKCS#7 test key type should use the secondary keyring
Jiri Slaby [Mon, 23 May 2016 23:26:20 +0000 (16:26 -0700)] 
kgdb: depends on VT
With VT=n, the kernel build fails with:
drivers/built-in.o: In function `kgdboc_pre_exp_handler':
kgdboc.c:(.text+0x7b5aa): undefined reference to `fg_console'
kgdboc.c:(.text+0x7b5ce): undefined reference to `vc_cons'
kgdboc.c:(.text+0x7b5d5): undefined reference to `vc_cons'
kgdboc.o is built when KGDB_SERIAL_CONSOLE is set. So make
KGDB_SERIAL_CONSOLE depend on HW_CONSOLE which includes those symbols.
Link: http://lkml.kernel.org/r/1459412955-4696-1-git-send-email-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: "Jim Davis" <jim.epost@gmail.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:26:17 +0000 (16:26 -0700)] 
drm/amdgpu: make amdgpu_mn_get wait for mmap_sem killable
amdgpu_mn_get which is called during ioct path relies on mmap_sem for
write. If the waiting task gets killed by the oom killer it would block
oom_reaper from asynchronous address space reclaim and reduce the
chances of timely OOM resolving. Wait for the lock in the killable mode
and return with EINTR if the task got killed while waiting.
[arnd@arndb.de: use ERR_PTR() to return from amdgpu_mn_get]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:26:14 +0000 (16:26 -0700)]
drm/radeon: make radeon_mn_get wait for mmap_sem killable
radeon_mn_get which is called during ioct path relies on mmap_sem for
write. If the waiting task gets killed by the oom killer it would block
oom_reaper from asynchronous address space reclaim and reduce the
chances of timely OOM resolving. Wait for the lock in the killable mode
and return with EINTR if the task got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:26:11 +0000 (16:26 -0700)]
drm/i915: make i915_gem_mmap_ioctl wait for mmap_sem killable
i915_gem_mmap_ioctl relies on mmap_sem for write. If the waiting task
gets killed by the oom killer it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving. Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:26:08 +0000 (16:26 -0700)]
uprobes: wait for mmap_sem for write killable
xol_add_vma needs mmap_sem for write. If the waiting task gets killed
by the oom killer it would block oom_reaper from asynchronous address
space reclaim and reduce the chances of timely OOM resolving. Wait for
the lock in the killable mode and return with EINTR if the task got
killed while waiting.
Do not warn in dup_xol_work if __create_xol_area failed due to fatal
signal pending because this is usually considered a kernel issue.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:26:05 +0000 (16:26 -0700)]
prctl: make PR_SET_THP_DISABLE wait for mmap_sem killable
PR_SET_THP_DISABLE requires mmap_sem for write. If the waiting task
gets killed by the oom killer it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving. Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:26:02 +0000 (16:26 -0700)]
exec: make exec path waiting for mmap_sem killable
setup_arg_pages requires mmap_sem for write. If the waiting task gets
killed by the oom killer it would block oom_reaper from asynchronous
address space reclaim and reduce the chances of timely OOM resolving.
Wait for the lock in the killable mode and return with EINTR if the task
got killed while waiting. All the callers are already handling error
path and the fatal signal doesn't need any additional treatment.
The same applies to __bprm_mm_init.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:59 +0000 (16:25 -0700)]
aio: make aio_setup_ring killable
aio_setup_ring waits for mmap_sem in writable mode. If the waiting task
gets killed by the oom killer it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving. Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting. This will also expedite the
return to the userspace and do_exit.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Benamin LaHaise <bcrl@kvack.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:57 +0000 (16:25 -0700)]
coredump: make coredump_wait wait for mmap_sem for write killable
coredump_wait waits for mmap_sem for write currently which can prevent
oom_reaper to reclaim the oom victims address space asynchronously
because that requires mmap_sem for read. This might happen if the oom
victim is multi threaded and some thread(s) is holding mmap_sem for read
(e.g. page fault) and it is stuck in the page allocator while other
thread(s) reached coredump_wait already.
This patch simply uses down_write_killable and bails out with EINTR if
the lock got interrupted by the fatal signal. do_coredump will return
right away and do_group_exit will take care to zap the whole thread
group.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:54 +0000 (16:25 -0700)]
vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
most architectures are relying on mmap_sem for write in their
arch_setup_additional_pages. If the waiting task gets killed by the oom
killer it would block oom_reaper from asynchronous address space reclaim
and reduce the chances of timely OOM resolving. Wait for the lock in
the killable mode and return with EINTR if the task got killed while
waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Andy Lutomirski <luto@amacapital.net> [x86 vdso]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:51 +0000 (16:25 -0700)]
ipc, shm: make shmem attach/detach wait for mmap_sem killable
shmat and shmdt rely on mmap_sem for write. If the waiting task gets
killed by the oom killer it would block oom_reaper from asynchronous
address space reclaim and reduce the chances of timely OOM resolving.
Wait for the lock in the killable mode and return with EINTR if the task
got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:48 +0000 (16:25 -0700)]
mm, fork: make dup_mmap wait for mmap_sem for write killable
dup_mmap needs to lock current's mm mmap_sem for write. If the waiting
task gets killed by the oom killer it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving. Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:45 +0000 (16:25 -0700)]
mm, proc: make clear_refs killable
CLEAR_REFS_MM_HIWATER_RSS and CLEAR_REFS_SOFT_DIRTY are relying on
mmap_sem for write. If the waiting task gets killed by the oom killer
and it would operate on the current's mm it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving. Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting. This will also expedite the
return to the userspace and do_exit even if the mm is remote.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Petr Cermak <petrcermak@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:42 +0000 (16:25 -0700)]
mm: make vm_brk killable
Now that all the callers handle vm_brk failure we can change it wait for
mmap_sem killable to help oom_reaper to not get blocked just because
vm_brk gets blocked behind mmap_sem readers.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:39 +0000 (16:25 -0700)]
mm, elf: handle vm_brk error
load_elf_library doesn't handle vm_brk failure although nothing really
indicates it cannot do that because the function is allowed to fail due
to vm_mmap failures already. This might be not a problem now but later
patch will make vm_brk killable (resp. mmap_sem for write waiting will
become killable) and so the failure will be more probable.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:36 +0000 (16:25 -0700)]
mm, aout: handle vm_brk failures
vm_brk is allowed to fail but load_aout_binary simply ignores the error
and happily continues. I haven't noticed any problem from that in real
life but later patches will make the failure more likely because vm_brk
will become killable (resp. mmap_sem for write waiting will become
killable) so we should be more careful now.
The error handling should be quite straightforward because there are
calls to vm_mmap which check the error properly already. The only
notable exception is set_brk which is called after beyond_if label. But
nothing indicates that we cannot move it above set_binfmt as the two do
not depend on each other and fail before we do set_binfmt and alter
reference counting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:33 +0000 (16:25 -0700)]
mm: make vm_munmap killable
Almost all current users of vm_munmap are ignoring the return value and
so they do not handle potential error. This means that some VMAs might
stay behind. This patch doesn't try to solve those potential problems.
Quite contrary it adds a new failure mode by using down_write_killable
in vm_munmap. This should be safer than other failure modes, though,
because the process is guaranteed to die as soon as it leaves the kernel
and exit_mmap will clean the whole address space.
This will help in the OOM conditions when the oom victim might be stuck
waiting for the mmap_sem for write which in turn can block oom_reaper
which relies on the mmap_sem for read to make a forward progress and
reclaim the address space of the victim.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:30 +0000 (16:25 -0700)]
mm: make vm_mmap killable
All the callers of vm_mmap seem to check for the failure already and
bail out in one way or another on the error which means that we can
change it to use killable version of vm_mmap_pgoff and return -EINTR if
the current task gets killed while waiting for mmap_sem. This also
means that vm_mmap_pgoff can be killable by default and drop the
additional parameter.
This will help in the OOM conditions when the oom victim might be stuck
waiting for the mmap_sem for write which in turn can block oom_reaper
which relies on the mmap_sem for read to make a forward progress and
reclaim the address space of the victim.
Please note that load_elf_binary is ignoring vm_mmap error for
current->personality & MMAP_PAGE_ZERO case but that shouldn't be a
problem because the address is not used anywhere and we never return to
the userspace if we got killed.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 23 May 2016 23:25:27 +0000 (16:25 -0700)]
mm: make mmap_sem for write waits killable for mm syscalls
This is a follow up work for oom_reaper [1]. As the async OOM killing
depends on oom_sem for read we would really appreciate if a holder for
write didn't stood in the way. This patchset is changing many of
down_write calls to be killable to help those cases when the writer is
blocked and waiting for readers to release the lock and so help
__oom_reap_task to process the oom victim.
Most of the patches are really trivial because the lock is help from a
shallow syscall paths where we can return EINTR trivially and allow the
current task to die (note that EINTR will never get to the userspace as
the task has fatal signal pending). Others seem to be easy as well as
the callers are already handling fatal errors and bail and return to
userspace which should be sufficient to handle the failure gracefully.
I am not familiar with all those code paths so a deeper review is really
appreciated.
As this work is touching more areas which are not directly connected I
have tried to keep the CC list as small as possible and people who I
believed would be familiar are CCed only to the specific patches (all
should have received the cover though).
This patchset is based on linux-next and it depends on
down_write_killable for rw_semaphores which got merged into tip
locking/rwsem branch and it is merged into this next tree. I guess it
would be easiest to route these patches via mmotm because of the
dependency on the tip tree but if respective maintainers prefer other
way I have no objections.
I haven't covered all the mmap_write(mm->mmap_sem) instances here
$ git grep "down_write(.*\<mmap_sem\>)" next/master | wc -l
98
$ git grep "down_write(.*\<mmap_sem\>)" | wc -l
62
I have tried to cover those which should be relatively easy to review in
this series because this alone should be a nice improvement. Other
places can be changed on top.
[0] http://lkml.kernel.org/r/
1456752417-9626-1-git-send-email-mhocko@kernel.org
[1] http://lkml.kernel.org/r/
1452094975-551-1-git-send-email-mhocko@kernel.org
[2] http://lkml.kernel.org/r/
1456750705-7141-1-git-send-email-mhocko@kernel.org
This patch (of 18):
This is the first step in making mmap_sem write waiters killable. It
focuses on the trivial ones which are taking the lock early after
entering the syscall and they are not changing state before.
Therefore it is very easy to change them to use down_write_killable and
immediately return with -EINTR. This will allow the waiter to pass away
without blocking the mmap_sem which might be required to make a forward
progress. E.g. the oom reaper will need the lock for reading to
dismantle the OOM victim address space.
The only tricky function in this patch is vm_mmap_pgoff which has many
call sites via vm_mmap. To reduce the risk keep vm_mmap with the
original non-killable semantic for now.
vm_munmap callers do not bother checking the return value so open code
it into the munmap syscall path for now for simplicity.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kieran Bingham [Mon, 23 May 2016 23:25:24 +0000 (16:25 -0700)] 
MAINTAINERS: add co-maintainer for scripts/gdb
Add myself as a co-maintainer for scripts/gdb supporting Jan Kizka
Link: http://lkml.kernel.org/r/fb5d34ce563f33d2f324f26f592b24ded30032ee.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kieran Bingham [Mon, 23 May 2016 23:25:21 +0000 (16:25 -0700)]
scripts/gdb: decode bytestream on dmesg for Python3
The recent fixes to lx-dmesg, now allow the command to print
successfully on Python3, however the python interpreter wraps the bytes
for each line with a b'<text>' marker.
To remove this, we need to decode the line, where .decode() will default
to 'UTF-8'
Link: http://lkml.kernel.org/r/d67ccf93f2479c94cb3399262b9b796e0dbefcf2.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Dom Cote <buzdelabuz2@gmail.com>
Tested-by: Dom Cote <buzdelabuz2@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dom Cote [Mon, 23 May 2016 23:25:19 +0000 (16:25 -0700)] 
scripts/gdb: fix issue with dmesg.py and python 3.X
When built against Python 3, GDB differs in the return type for its
read_memory function, causing the lx-dmesg command to fail.
Now that we have an improved read_16() we can use the new
read_memoryview() abstraction to make lx-dmesg return valid data on both
current Python APIs
Tested with python 3.4 and 2.7
Tested with gdb 7.7
Link: http://lkml.kernel.org/r/28477b727ff7fe3101fd4e426060e8a68317a639.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Dom Cote <buzdelabuz2+git@gmail.com>
[kieran@bingham.xyz: Adjusted commit log to better reflect code changes]
Tested-by: Kieran Bingham <kieran@bingham.xyz> (Py2.7,Py3.4,GDB10)
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dom Cote [Mon, 23 May 2016 23:25:16 +0000 (16:25 -0700)]
scripts/gdb: improve types abstraction for gdb python scripts
Change the read_u16 function so it accepts both 'str' and 'byte' as type
for the arguments.
When calling read_memory() from gdb API, depending on if it was built
with 2.7 or 3.X, the format used to return the data will differ ( 'str'
for 2.7, and 'byte' for 3.X ).
Add a function read_memoryview() to be able to get a 'memoryview' object
back from read_memory() both with python 2.7 and 3.X .
Tested with python 3.4 and 2.7
Tested with gdb 7.7
Link: http://lkml.kernel.org/r/73621f564503137a002a639d174e4fb35f73f462.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Dom Cote <buzdelabuz2+git@gmail.com>
Tested-by: Kieran Bingham <kieran@bingham.xyz> (Py2.7,Py3.4,GDB10)
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kieran Bingham [Mon, 23 May 2016 23:25:13 +0000 (16:25 -0700)] 
scripts/gdb: add lx_thread_info_by_pid helper
The tasks module already provides helpers to find the task struct by
pid, and the thread_info by task struct; however this is cumbersome to
utilise on the gdb commandline.
Wrap these two functionalities together in an extra single helper to
allow exploring the thread info, from a PID value
Link: http://lkml.kernel.org/r/dadc5667f053ec811eb3e3033d99d937fedbc93b.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kieran Bingham [Mon, 23 May 2016 23:25:10 +0000 (16:25 -0700)]
scripts/gdb: add documentation example for radix tree
Provide a worked example for utilising the lx_radix_tree_lookup function
Link: http://lkml.kernel.org/r/e786008ac5aec4b84198812805b326d718bdeb4b.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kieran Bingham [Mon, 23 May 2016 23:25:07 +0000 (16:25 -0700)]
scripts/gdb: add a Radix Tree Parser
Linux makes use of the Radix Tree data structure to store pointers
indexed by integer values. This structure is utilised across many
structures in the kernel including the IRQ descriptor tables, and
several filesystems.
This module provides a method to lookup values from a structure given
its head node.
Usage:
The function lx_radix_tree_lookup, must be given a symbol of type struct
radix_tree_root, and an index into that tree.
The object returned is a generic integer value, and must be cast
correctly to the type based on the storage in the data structure.
For example, to print the irq descriptor in the sparse irq_desc_tree at
index 18, try the following:
(gdb) print (struct irq_desc)$lx_radix_tree_lookup(irq_desc_tree, 18)
Link: http://lkml.kernel.org/r/d2028c55e50cf95a9b7f8ca0d11885174b0cc709.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kiszka [Mon, 23 May 2016 23:25:05 +0000 (16:25 -0700)] 
scripts/gdb: cast CPU numbers to integer
We won't see more than 2 billion CPUs any time soon, and having cpu_list
return long makes the output of lx-cpus a bit ugly.
Link: http://lkml.kernel.org/r/dcb45c3b0a59e0fd321fa56ff7aa398458c689b3.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kieran Bingham [Mon, 23 May 2016 23:25:02 +0000 (16:25 -0700)]
scripts/gdb: add cpu iterators
The linux kernel provides macro's for iterating against values from the
cpu_list masks. By providing some commonly used masks, we can mirror
the kernels helper macros with easy to use generators.
Link: http://lkml.kernel.org/r/d045c6599771ada1999d49612ee30fd2f9acf17f.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kieran Bingham [Mon, 23 May 2016 23:24:59 +0000 (16:24 -0700)]
scripts/gdb: add mount point list command
lx-mounts will identify current mount points based on the 'init_task'
namespace by default, as we do not yet have a kernel thread list
implementation to select the current running thread.
Optionally, a user can specify a PID to list from that process'
namespace
Link: http://lkml.kernel.org/r/e614c7bc32d2350b4ff1627ec761a7148e65bfe6.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kieran Bingham [Mon, 23 May 2016 23:24:56 +0000 (16:24 -0700)]
scripts/gdb: add io resource readers
Provide iomem_resource and ioports_resource printers and command hooks
It can be quite interesting to halt the kernel as it's booting and check
to see this list as it is being populated.
It should be useful in the event that a kernel is not booting, you can
identify what memory resources have been registered
Link: http://lkml.kernel.org/r/f0a6b9fa9c92af4d7ed2e7343ccc84150e9c6fc5.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kieran Bingham [Mon, 23 May 2016 23:24:53 +0000 (16:24 -0700)]
scripts/gdb: provide a dentry_name VFS path helper
Walk the VFS entries, pre-pending the iname strings to generate a full
VFS path name from a dentry.
Link: http://lkml.kernel.org/r/4328fdb2d15ba7f1b21ad21c2eecc38d9cfc4d13.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This page took 0.055557 seconds and 5 git commands to generate.
projects / deliverable / linux.git / log
