Jérémie Galarneau [Wed, 29 Apr 2020 01:40:12 +0000 (21:40 -0400)]
kerner-ctl: add RING_RING_BUFFER_GET_NEXT_SUBBUF_METADATA_CHECK
Add a wrapper for RING_RING_BUFFER_GET_NEXT_SUBBUF_METADATA_CHECK
which gets the next metadata subbuffer and returns a boolean flag
indicating whether the metadata is guaranteed to be in a consistent
state at the end of this sub-buffer (can be parsed).
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I13fbdfe51c3c4ef04581409e0fbc9837ed6d555d
Jonathan Rajotte [Thu, 21 May 2020 00:53:45 +0000 (20:53 -0400)]
Fix: common: fs_handle_seek returns negative value on success
Observed issue
==============
Babeltrace 1/2 fails to fetch data from a live session.
Error:
PLUGIN/SRC.CTF.LTTNG-LIVE/VIEWER lttng_live_get_stream_bytes@viewer-connection.c:1593 [lttng-live] Received get_data_packet response: error
PLUGIN/CTF/MSG-ITER request_medium_bytes@msg-iter.c:546 [lttng-live] User function failed: status=ERROR
PLUGIN/CTF/MSG-ITER ctf_msg_iter_get_next_message@msg-iter.c:2881 [lttng-live] Cannot handle state: msg-it-addr=0x562d87521a40, state=DSCOPE_TRACE_PACKET_HEADER_BEGIN
PLUGIN/SRC.CTF.LTTNG-LIVE lttng_live_iterator_next_handle_one_active_data_stream@lttng-live.c:821 [lttng-live] CTF message iterator failed to get next message: msg-iter=0x562d87521a40, msg-iter-status=ERROR
PLUGIN/SRC.CTF.LTTNG-LIVE lttng_live_msg_iter_next@lttng-live.c:1499 [lttng-live] Error preparing the next batch of messages: live-iter-status=LTTNG_LIVE_ITERATOR_STATUS_ERROR
LIB/MSG-ITER bt_message_iterator_next@iterator.c:865 Component input port message iterator's "next" method failed: iter-addr=0x562d8751ab70, iter-upstream-comp-name="lttng-live", iter-upstream-comp-log-level=WARNING, iter-upstream-comp-class-type=SOURCE, iter-upstream-comp-class-name="lttng-live", iter-upstream-comp-class-partial-descr="Connect to an LTTng relay daemon", iter-upstream-port-type=OUTPUT, iter-upstream-port-name="out", status=ERROR
PLUGIN/FLT.UTILS.MUXER muxer_upstream_msg_iter_next@muxer.c:446 [muxer] Upstream iterator's next method returned an error: status=ERROR
PLUGIN/FLT.UTILS.MUXER validate_muxer_upstream_msg_iters@muxer.c:989 [muxer] Cannot validate muxer's upstream message iterator wrapper: muxer-msg-iter-addr=0x562d87515280, muxer-upstream-msg-iter-wrap-addr=0x562d8751ca90
PLUGIN/FLT.UTILS.MUXER muxer_msg_iter_next@muxer.c:1417 [muxer] Cannot get next message: comp-addr=0x562d8751a260, muxer-comp-addr=0x562d8751a2e0, muxer-msg-iter-addr=0x562d87515280, msg-iter-addr=0x562d8751aa90, status=ERROR
LIB/MSG-ITER bt_message_iterator_next@iterator.c:865 Component input port message iterator's "next" method failed: iter-addr=0x562d8751aa90, iter-upstream-comp-name="muxer", iter-upstream-comp-log-level=WARNING, iter-upstream-comp-class-type=FILTER, iter-upstream-comp-class-name="muxer", iter-upstream-comp-class-partial-descr="Sort messages from multiple inpu", iter-upstream-port-type=OUTPUT, iter-upstream-port-name="out", status=ERROR
LIB/GRAPH consume_graph_sink@graph.c:462 Component's "consume" method failed: status=ERROR, comp-addr=0x562d8751a3d0, comp-name="pretty", comp-log-level=WARNING, comp-class-type=SINK, comp-class-name="pretty", comp-class-partial-descr="Pretty-print messages (`text` fo", comp-class-is-frozen=0, comp-class-so-handle-addr=0x562d8751a110, comp-class-so-handle-path="/usr/local/lib/babeltrace2/plugins/babeltrace-plugin-text.so", comp-input-port-count=1, comp-output-port-count=0
CLI cmd_run@babeltrace2.c:2529 Graph failed to complete successfully
PLUGIN/SRC.CTF.LTTNG-LIVE/VIEWER lttng_live_session_detach@viewer-connection.c:1211 [lttng-live] Unknown detach return code 0
The relevant relayd log:
DEBUG2 - Relay get data packet (in viewer_get_packet() at live.c:1770)
PERROR - Failed to seek file system handle of viewer stream 4 to offset
2244861952: Success (in viewer_get_packet() at live.c:1810)
DEBUG1 - Sent 262156 bytes for stream 4 (in viewer_get_packet() at live.c:1852)
Cause
=====
The fs_handle_seek function calls lseek on a stream file of ~2.5GB. The
return value of the lseek call is downcasted from off_t (signed 64 bit
on my system) to int. The resulting value is negative and force an error
at the call sites.
Solution
========
Use off_t as the return type.
Note that current call sites of fs_handle_seek already expect an off_t
return value.
ag fs_handle_seek:
src/bin/lttng-relayd/stream.c
249: lseek_ret = fs_handle_seek(previous_stream_file, previous_stream_copy_origin, SEEK_SET);
src/bin/lttng-relayd/live.c
1804: lseek_ret = fs_handle_seek(vstream->stream_file.handle,
src/bin/lttng-relayd/viewer-stream.c
176: lseek_ret = fs_handle_seek(
ag lseek_ret:
src/bin/lttng-relayd/stream.c
193: off_t lseek_ret, previous_stream_copy_origin;
src/bin/lttng-relayd/live.c
1760: off_t lseek_ret;
src/bin/lttng-relayd/viewer-stream.c
174: off_t lseek_ret;
Known drawbacks
=========
This limitation existed before this patch.
On 32bit system without _FILE_OFFSET_BITS=64 defined at compile time
(-D_FILE_OFFSET_BITS=64) the lseek operation could return EOVERFLOW for
stream file bigger then 2,147,483,647 bytes. Anybody working on a 32bit
system should be aware of the limitation of working in 32bit.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ib6c7bb3c9c402bdfbe9b447b1f8f298de6058caa
Jérémie Galarneau [Thu, 14 May 2020 20:08:56 +0000 (16:08 -0400)]
Fix: lttng: Destroying session message repeated during destruction
Observed Issue
==============
The `Destroying session X` is repeated indifinitely whenever
the data pending phase lasts more than one iteration.
```
$ lttng destroy
Destroying session eloi_turcotte.Destroying session
eloi_turcotte.Destroying session eloi_turcotte.Destroying session
eloi_turcotte.D
```
Cause
=====
Missing check that the message has been printed.
Solution
========
Use the same check as is done later for
lttng_destruction_handle_wait_for_completion().
Known drawbacks
===============
None.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I6cd29d917925644a4994c515b4177bbd05ffa98e
Jérémie Galarneau [Fri, 15 May 2020 20:04:11 +0000 (16:04 -0400)]
Add lttng_dynamic_buffer_append_view util
Add lttng_dynamic_buffer_append_view() which appends the contents
of a buffer view to a dynamic buffer.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I4082ba2c848b79aa2116847987067453638de441
Jérémie Galarneau [Fri, 15 May 2020 19:55:27 +0000 (15:55 -0400)]
Make lttng_dynamic_buffer_append_buffer const-correct
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I6d42d2d9f8beca15b026fc43ee57270173480c2d
Jérémie Galarneau [Tue, 12 May 2020 18:37:37 +0000 (14:37 -0400)]
.gitignore: add test_buffer_view
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I620042eb36b6041887fe0d4dc7353c311d5e867a
Jérémie Galarneau [Wed, 20 May 2020 19:56:03 +0000 (15:56 -0400)]
Fix: liblttng-ctl: leak of tracker handle in lttng_[un]track_pid
The lttng_track_pid and lttng_untrack_pid functions were reimplemented
on top of the new lttng_process_attr_tracker_handle API (new in 2.12).
Both functions do not destroy the tracker handle on their return
path.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ieeeace2011ba6ee1e5024306ea735f0389c3980d
Jonathan Rajotte [Tue, 19 May 2020 16:23:18 +0000 (12:23 -0400)]
Fix: common: abort on rotation after time manipulation
Observed issue
==============
Core dump:
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x0000003eb4025548 in __GI_abort () at abort.c:79
#2 0x0000003eb402542f in __assert_fail_base (fmt=0x3eb4184ae0 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x4cdee0 "(trace_chunk->timestamp_close).is_set",
file=0x4cde78 "../../../lttng-tools-2.11.3/src/common/trace-chunk.c", line=903, function=0x4cf4a0 <__PRETTY_FUNCTION__.6756> "lttng_trace_chunk_move_to_completed")
at assert.c:92
#3 0x0000003eb4033af2 in __GI___assert_fail (assertion=assertion@entry=0x4cdee0 "(trace_chunk->timestamp_close).is_set",
file=file@entry=0x4cde78 "../../../lttng-tools-2.11.3/src/common/trace-chunk.c", line=line@entry=903,
function=function@entry=0x4cf4a0 <__PRETTY_FUNCTION__.6756> "lttng_trace_chunk_move_to_completed") at assert.c:101
#4 0x000000000047f37e in lttng_trace_chunk_move_to_completed (trace_chunk=0x7fcb5c00e570) at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:903
#5 0x0000000000480755 in lttng_trace_chunk_release (ref=0x7fcb5c00e598) at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1117
#6 urcu_ref_put (release=<optimized out>, ref=0x7fcb5c00e598) at /usr/include/urcu/ref.h:68
#7 lttng_trace_chunk_put (chunk=0x7fcb5c00e570) at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1150
#8 0x0000000000429c22 in cmd_rotate_session (session=0x7fcb5c003ff0, rotate_return=rotate_return@entry=0x7fcb6b7ed470, quiet_rotation=quiet_rotation@entry=false)
at ../../../../lttng-tools-2.11.3/src/bin/lttng-sessiond/cmd.c:5037
#9 0x00000000004451d7 in process_client_msg (cmd_ctx=0x7fcb5c00e760, sock=sock@entry=0x7fcb6b7fd4c0, sock_error=sock_error@entry=0x7fcb6b7fd4c4)
at ../../../../lttng-tools-2.11.3/src/bin/lttng-sessiond/client.c:1852
#10 0x00000000004474c6 in thread_manage_clients (data=<optimized out>) at ../../../../lttng-tools-2.11.3/src/bin/lttng-sessiond/client.c:2199
#11 0x00000000004422f2 in launch_thread (data=0x4f97a0) at ../../../../lttng-tools-2.11.3/src/bin/lttng-sessiond/thread.c:75
#12 0x0000003eb4408ed4 in start_thread (arg=<optimized out>) at pthread_create.c:479
#13 0x0000003eb40f8e6f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Reproduction:
Disable ntp/any time management mechanism.
lttng create
lttng enable-event -u 'lttng_ust_tracef:*'
lttng start
lttng rotate
date --set="$(date --date='-1 hour')"
lttng rotate auto-
20200515-142503
Waiting for rotation to complete
Error: Failed to query the state of the rotation.
Logs:
DEBUG1 - 12:25:28.
570037987 [2660/2717]: Setting trace chunk close command to "move to completed chunk folder" (in lttng_trace_chunk_set_close_command() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1073)
Error: Failed to set trace chunk close timestamp: close timestamp is before creation timestamp
Error: Failed to set the close timestamp of the current trace chunk of session "auto-
20200515-142503"
lttng-sessiond: ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:903: lttng_trace_chunk_move_to_completed: Assertion `(trace_chunk->timestamp_close).is_set' failed.
...
Aborted (core dumped)
root@X10SDV-8C-TLN4F:~# DEBUG1 - 12:25:29.
534263017 [2739/2739]: Releasing trace chunk registry to all trace chunks (in lttng_trace_chunk_registry_put_each_chunk() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1414)
DEBUG1 - 12:25:29.
534317468 [2739/2739]: Releasing reference to trace chunk: session_id = 0chunk_id = 2, name = "20200515T122528+0000-2", status = closed (in lttng_trace_chunk_registry_put_each_chunk() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1435)
DEBUG1 - 12:25:29.
534365653 [2739/2739]: Releasing reference to trace chunk: session_id = 0chunk_id = 1, name = "20200515T142520+0000-1", status = closed (in lttng_trace_chunk_registry_put_each_chunk() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1435)
DEBUG1 - 12:25:29.
534400638 [2739/2739]: Released reference to 2 trace chunks in lttng_trace_chunk_registry_put_each_chunk() (in lttng_trace_chunk_registry_put_each_chunk() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1447)
Error: 2 trace chunks are leaked by lttng-consumerd. This can be caused by an internal error of the session daemon.
Cause
=====
The trace_chunk->timestamp_close is not set since the result from time()
is smaller than the creation timestamp.
The close timestamp is smaller because the calendar system time is
modified by an administrator.
time() offers no monotonicity guarantee and hence is exposed to time
modification of the system.
The begin and close timestamps are strictly used in the name generation
of the chunk/archives. Given the current usage of these timestamps
validating monotonicity should not be a fatal error. Name uniqueness is
provided by the chunk name suffix (auto increment).
Solution
========
Do not enforce monotonicity for the begin and close timestamps but warn
on unexpected return (begin > close).
Known drawbacks
=========
None.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ic4b17285d150358d1569d6821c451c243e64e9a1
Francis Deslauriers [Tue, 5 May 2020 16:27:52 +0000 (12:27 -0400)]
Tests: test_exclusion: exclusion after tracing active
This testcase tests for a UST bug where exclusions made when the tracing
is active are not excluding the undesired events.
This UST bug was fixed by the following commit:
commit
de713d8a77cbd77e60f58537b0fc222f98fde395
Author: Francis Deslauriers <francis.deslauriers@efficios.com>
Date: Tue May 5 11:51:58 2020 -0400
Fix: event probes attached before event enabled
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I6d896682d5f5e16582ab195c6f4d6946de394843
Depends-on: lttng-ust: Id984f266d976f346b001db81cd8a2b74965b5ef2
Francis Deslauriers [Tue, 5 May 2020 16:19:13 +0000 (12:19 -0400)]
Tests: `gen-ust-nevents`: add syncpoints
Adds two sync points:
`--sync-in-main`: create a file when `gen-ust-nevents` when app is in
main,
`--sync-before-first-event`: wait on a file before starting to
generate any events.
Those two sync points allow for tests to do work when the testapp has
reached main BUT before any events are generated.
This is useful to perform actions on a UST channel once tracing has
started and is active on a particular app.
For example, we want to test a scenario where events are enabled once an
app is already generating other events.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Id501c8b373e1a9b43aad6caef11672fe6c30a55a
Francis Deslauriers [Thu, 14 May 2020 18:56:05 +0000 (14:56 -0400)]
Tests: accept built-in kernel modules
When validating that the kernel tracer is available on the system also
consider that it might be built directly in the kernel.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I2b0e1767b8a6d561ad94ba38546cb183d9e98a95
Jonathan Rajotte [Mon, 11 May 2020 18:21:51 +0000 (14:21 -0400)]
API: missing includes in lttng.h
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I8ffc15f1ea855cdc6e08da6387936406ce9f7d75
Jonathan Rajotte [Mon, 11 May 2020 18:03:34 +0000 (14:03 -0400)]
API: missing clear and clear-handle includes in lttng.h
Refs: #1266
Reported-by: Shuo Yang <shuoyang@didiglobal.com>
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ia933831e806e51a071f05b2c0425799f2f6410cf
Jonathan Rajotte [Mon, 11 May 2020 18:02:00 +0000 (14:02 -0400)]
API: sort lttng.h includes
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I59699d6252c8b840cc3dc80316e0462c9420b465
Jonathan Rajotte [Mon, 11 May 2020 13:57:53 +0000 (09:57 -0400)]
Fix: API: missing end brace for C++ linkage specification.
Fixes: #1266
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ia8f2b4b55acc5770297d20df1b95575cf7fa480a
Jérémie Galarneau [Tue, 5 May 2020 17:49:37 +0000 (13:49 -0400)]
README.md: fix typos in component descriptions
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I569455d5011e46cda7046d0aa0d6c507f461677d
Francis Deslauriers [Mon, 4 May 2020 19:59:22 +0000 (15:59 -0400)]
Fix: tests: `-Wstringop-overflow` warning
I get the following warning when compiling with `-Wall -Werror` with gcc
9.3.0:
In file included from ../../src/common/macros.h:15,
from ../../src/common/lttng-kernel.h:14,
from ../../src/bin/lttng-sessiond/trace-kernel.h:14,
from test_kernel_data.c:16:
In function ‘lttng_strnlen’,
inlined from ‘lttng_strncpy’ at ../../src/common/macros.h:120:6,
inlined from ‘test_create_kernel_event’ at test_kernel_data.c:136:2:
../../src/common/compat/string.h:28:8: error: ‘memchr’ reading 256 bytes from a region of size 11 [-Werror=stringop-overflow=]
28 | end = memchr(str, 0, max);
| ^~~~~~~~~~~~~~~~~~~
Fix this warning by using the RANDOM_STRING_LEN value as the max number
of bytes to copy.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: I61752ee17163c4d642aad21b296c0fc4fad5b7a6
(cherry picked from commit
1dd622b10db0821d77490c937caee80c65332f14)
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Thu, 30 Apr 2020 16:33:51 +0000 (12:33 -0400)]
Improve README.md
Changes:
* Harmonize voice and style.
* Add non-breaking spaces and hyphens where missing.
* Add many internal and external links.
* Add `lttng-crash` and the Python bindings to the list of components.
* Use `≥` instead of `>=` (welcome to 2020).
* Do not specify why you need to configure with `--disable-epoll` to use
a Linux kernel < 2.6.27: I don't think the end user needs to know
about poll() vs. epoll().
* Do not mention Mathieu Desnoyers and Paul E. McKenney (this is a
README, not the `THANKS` file).
* Mention Babeltrace 2 instead of Babeltrace.
* Use `https://babeltrace.org/` instead of
`https://lttng.org/babeltrace`.
* Add kmod to the list of optional dependencies.
* Specify that you can use `--enable-embedded-help` at build
configuration time if you don't plan to have a manual pager installed
on your system.
* Don't mention the known GNU gold bug
(`http://sourceware.org/bugzilla/show_bug.cgi?id=11317`).
Again, the end user only cares about which minimal version of the tool
to use, not why.
* Use clear, ordered build steps.
For the configuration step, specify which options are available and
what they change.
* Remove the link to `doc/quickstart.txt`.
Link to the LTTng Documentation and online manual pages instead, which
are more complete.
* Remove the link to `doc/streaming-howto.txt`: the LTTng Documentation
and online manual pages cover this topic.
* Change the "Contact" section for the "Community" section and put all
the community/communication links in there.
* Remove the "Package contents" section: end users do not care about
this and we're not keeping it updated as we amend the project's source
anyway.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Change-Id: I4e4c0b183d9a18243db23cde3edb608e32c5e30e
(cherry picked from commit
f8bd3a12204c10743dfbc456d363e30894eddfc5)
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Christophe Bedard [Wed, 8 Apr 2020 21:04:48 +0000 (17:04 -0400)]
Docs: fix comment typo in lttng-error.h
Signed-off-by: Christophe Bedard <bedard.christophe@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I735b60dd072d717e5f8ad4dd4420e37187e05de4
Jérémie Galarneau [Tue, 21 Apr 2020 21:08:10 +0000 (17:08 -0400)]
Fix: sessiond: sessiond and agent deadlock on destroy
Observed issue
--------------
While running the out-of-tree java agent tests [1], the session daemon
and agent often end up in a deadlock.
Attaching gdb to the session daemon, we can see that two threads are
blocked in an intriguing state.
Thread 13 (Thread 0x7f89027fc700 (LWP 9636)):
#0 0x00007f891e81a4cf in __lll_lock_wait () from /usr/lib/libpthread.so.0
#1 0x00007f891e812e03 in pthread_mutex_lock () from /usr/lib/libpthread.so.0
#2 0x000055637f1fbd92 in session_lock_list () at session.c:156
#3 0x000055637f25dc47 in update_agent_app (app=0x7f88ec003480) at agent-thread.c:56
#4 0x000055637f25ec0a in thread_agent_management (data=0x556380cd2400) at agent-thread.c:426
#5 0x000055637f22fb3a in launch_thread (data=0x556380cd24a0) at thread.c:65
#6 0x00007f891e81046f in start_thread () from /usr/lib/libpthread.so.0
#7 0x00007f891e7203d3 in clone () from /usr/lib/libc.so.6
Thread 8 (Thread 0x7f8919309700 (LWP 9631)):
#0 0x00007f891e81b44d in recvmsg () from /usr/lib/libpthread.so.0
#1 0x000055637f267847 in lttcomm_recvmsg_inet_sock (sock=0x7f88ec0033c0, buf=0x7f89192f5d5c, len=4, flags=0) at inet.c:367
#2 0x000055637f2146c6 in recv_reply (sock=0x7f88ec0033c0, buf=0x7f89192f5d5c, size=4) at agent.c:275
#3 0x000055637f215202 in app_context_op (app=0x7f88ec003400, ctx=0x7f8908020900, cmd=AGENT_CMD_APP_CTX_DISABLE) at agent.c:552
#4 0x000055637f215c2d in disable_context (ctx=0x7f8908020900, domain=LTTNG_DOMAIN_JUL) at agent.c:841
#5 0x000055637f217480 in agent_destroy (agt=0x7f890801dc20) at agent.c:1326
#6 0x000055637f243448 in trace_ust_destroy_session (session=0x7f8908004010) at trace-ust.c:1408
#7 0x000055637f1fd775 in session_release (ref=0x7f8908001e70) at session.c:873
#8 0x000055637f1fb9ac in urcu_ref_put (ref=0x7f8908001e70, release=0x55637f1fd62a <session_release>) at /usr/include/urcu/ref.h:68
#9 0x000055637f1fdad2 in session_put (session=0x7f8908000d10) at session.c:942
#10 0x000055637f2369e6 in process_client_msg (cmd_ctx=0x7f890800e6e0, sock=0x7f8919308560, sock_error=0x7f8919308564) at client.c:2102
#11 0x000055637f2375ab in thread_manage_clients (data=0x556380cd1840) at client.c:2347
#12 0x000055637f22fb3a in launch_thread (data=0x556380cd18b0) at thread.c:65
#13 0x00007f891e81046f in start_thread () from /usr/lib/libpthread.so.0
#14 0x00007f891e7203d3 in clone () from /usr/lib/libc.so.6
T8 is holding session list lock while the cmd_destroy_session
command is being processed. More specifically, it is attempting
to destroy an "agent_context" by communicating with an "agent"
application.
Meanwhile, T13 is still registering that same "agent" application.
Cause
-----
The deadlock itself is pretty simple to understand.
The "agent thread" (T13) has the responsability of accepting new agent
application connections. When such a connection occurs, the thread
creates a new `agent_app` instance and sends the current sessions'
configuration (i.e. their event rules and contexts) to the agent
application. When that "update" is complete, a "registration done"
message is sent to the new agent application.
From the stacktrace above, we can see that T13 is attempting to update
the agent application with its initial configuration, but it is
blocked on the acquisition of the session list lock. The application's
agent is also blocked since it is waiting for the "registration done"
message before allowing tracing to proceed (not shown here, but seen
in the test logs).
Meanwhile, T8 is holding the session list lock while destroying a
session. This is expected as all client commands are executed with
this lock held. It is, amongst other reasons, used to serialize
changes to the sessions' configuration and configuration updates sent
to the tracers (i.e. because new apps appear or to keep existing
tracers in sync with the users' session configuration).
The question becomes: why is T8 tearing down an application that is
not yet registered?
First, inspecting `agent_app` immediately shows that this structure
has no built-in synchronization mechanism. Therefore, the fact that
two threads are accessing it at the same time raises a big red flag.
Speculating on the intentions of the original design, my intuition is
that the "agent_management" thread's role is limited to instantiating
an `agent_app` and synchronizing it with the various sessions'
configuration. Once that synchronization is performed, the agent
application should be published and never accessed again by the "agent
thread".
Configuration updates (i.e. new event rules, contexts) are then sent
synchronously as they are requested by a client in the context of the
client thread. Those updates are performed while holding the session
list lock.
Hence, there is only one thread that should manipulate the agent
application at any given time making an explicit `agent_app` lock
unnecessary.
Overall, this would echo what is done when a 'user space tracer'
application registers to the session daemon (see dispatch.c:368).
Evidently this isn't what is happening here.
The agent thread creates the `agent_app`, publishes it, and then
performs an "agent app update" (sending the configuration) while
holding the session list lock. This means that there is a window where
an agent application is visible to the other threads, yet has not been
properly registered.
Solution
--------
The acquisition of the session list lock is moved outside of
update_agent_app() to allow the "agent thread" to hold the session
list lock during the "configuration update" phase of the agent
application registration.
Essentially, the sequence of operation changes from:
- Agent tcp connection established
- call handle_registration()
- agent version check
- allocation of agent_app instance
- new agent_add is published through the global agent_apps_ht_by_sock
hashtable
***
it is now reachable by all other threads without any form of
exclusivity synchronization.
***
- update_agent_app
- acquire session list lock
- iterate over sessions
- send configuration
- release session list lock
- send registration done
to:
- Agent tcp connection established
- call accept_agent_registration()
- agent version check
- allocation of agent_app instance
- acquire session list lock
- update_agent_app
- iterate over sessions
- send configuration
- send registration done
- new agent_add is published through the global agent_apps_ht_by_sock
hashtable
- release session list lock
Links
-----
[1] https://github.com/lttng/lttng-ust-java-tests
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ia34c5ad81ed3936acbca756b425423e0cb8dbddf
Jérémie Galarneau [Wed, 22 Apr 2020 16:25:20 +0000 (12:25 -0400)]
relayd: clean-up: remove unused DATETIME_STRING_SIZE definition
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I79d6fd63537792b3031075bb102daddce5db1bde
Jérémie Galarneau [Fri, 17 Apr 2020 19:49:52 +0000 (15:49 -0400)]
Fix: load: incomplete error handling for load_session_from_file
This fix is adapted from a fix against the stable-2.11 branch. The
commit message of the stable-2.11 branch follows.
An equivalent fix was already in place in `load_session_from_path()`,
but the same problem as the stable-2.11 branch is present in
`load_session_from_file()`.
Original message:
Observed issue
==============
lttng-ivc test fails to fail.
test_save_load_blocking_timeout[lttng-tools-2.12-lttng-tools-2.11-False]
Here we load a xml created by lttng-tools-2.12 and try to load it using
lttng-tools 2.11. We expect this to fail on the load.
The command report an error on the stderr but the command return code
value is zero.
From lttng-ivc test runtime.log:
Command #0
Return value: 0
Command: lttng load --input-path=/home/joraj/lttng/lttng-ivc/.tox/py3/tmp/test_save_load_blocking_timeou0/save_load saved_trace
STDOUT:
Session saved_trace has been loaded successfully
STDERR:
XML Error: Element 'process_attr_trackers': This element is not expected.
Error: Session configuration file validation failed
Cause
=====
The error coming from load_session_from_file is not handled correctly.
Solution
========
Rework error handling in load_session_from_path and
load_session_from_file.
LTTNG_ERR_LOAD_SESSION_NOENT is NOT an error when session_name is
specified in load_session_from_path. In this scenario, we are actively
looking for the configuration of the session.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Change-Id: Ic68c253aa194bf8ab72c3c271f10d443118bdeee
Simon Marchi [Fri, 29 Nov 2019 21:48:16 +0000 (16:48 -0500)]
actions: improve logging in lttng_action_create_from_buffer
Small improvements in the logging messages. Use "Create from buffer"
instead of "Deserializing", since that's the term used in the function
names.
Change-Id: I7e688df766602cfb73bc40d87d224591c0f29534
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Fri, 29 Nov 2019 21:46:05 +0000 (16:46 -0500)]
actions: introduce lttng_action_init
This function is to be used to initialize the common portion of all
action structures. I have updated the sole currently existing action
(notify), but the function will also be used in subsequent patches.
Change-Id: I4e42554c42a4e6a5ef2da292a6dfeb708d72a602
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Thu, 28 Nov 2019 22:51:01 +0000 (17:51 -0500)]
actions: introduce function typedef for creating actions from buffer
The only existing action type, LTTNG_ACTION_TYPE_NOTIFY, does not
require deserializing additional data (on top of the action type field),
so lttng_action_create_from_buffer handles it in a trivial way.
Upcoming patches will introduce new action types which will need to
deserialize some additional data. This patch prepares
lttng_action_create_from_buffer for that by making it call an
action-specific function for deserializing this additional data. The
changes are inspired by what lttng_condition_create_from_buffer does.
No functional changes intended.
Change-Id: I469a67b744aa2cf7a45d7d970f1bbee6a994a2a9
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Fri, 29 Nov 2019 21:42:24 +0000 (16:42 -0500)]
buffer-view: introduce lttng_buffer_view_contains_string
This function can be used to safely validate that a string in a buffer
view has the length we expect. The goal is to avoid doing any reads
outside the buffer view, whatever the input is, considering that the
buffer and advertised length of the string are untrusted data.
It will be used by subsequent patches to deserialize strings from
received buffers.
Change-Id: I8afc4b6f9334e035e0ef02cb96b157df59d8107d
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Mon, 25 Nov 2019 19:20:31 +0000 (14:20 -0500)]
Move actions source files to src/common/actions directory
Since more actions will be added, group them under an "actions"
directory. The files to be added are expected to have some pretty
generic/overloaded names, such as start-session.c and snapshot.c, so
having them under the actions directory make it clear that they
implement the action described by the name.
Change-Id: Ia47160dd75531eb9bcf13f875f4bc6caa2391d7b
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Wed, 1 Apr 2020 21:48:09 +0000 (17:48 -0400)]
ust registry: Refactor representation of nested types
Those allow LTTng-UST to internally represent nested types properly,
and to serialize them when sending them over to the session
daemon. However, for now, the session daemon only accepts arrays and
sequences which contain an integer type, which is the only use-case
emitted by lttng-ust. Wait until we have the nested types wired up
within lttng-ust before accepting and supporting nested types so it
can be tested.
Given the size of this change to ust-metadata.c, use this opportunity
to make sure that every
if (ret)
...
in this file is changed to conform to lttng-tools coding style:
if (ret) {
...
}
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I3ac44fc3a993f73d1fb08056331ad6fed7059981
Depends-on: lttng-ust: I45bb0886c5ac970c3ca75dbefcb94adb50801294
Simon Marchi [Fri, 3 Apr 2020 17:52:41 +0000 (13:52 -0400)]
common: keep libcommon_la_SOURCES list sorted
Change-Id: I8d263f4d876047074cab3169f929fd255536d702
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Fri, 3 Apr 2020 20:14:05 +0000 (16:14 -0400)]
lttng-crash(1): document the command's positional argument
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Change-Id: I919329f2e072b14ad94181e98e49cb8840991225
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Fri, 3 Apr 2020 02:48:57 +0000 (22:48 -0400)]
lttng-sessiond(8): append missing argument to short options
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Change-Id: Ifab424acfa6dedbe43167e69e2c2fb70f3ecf9a7
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Fri, 3 Apr 2020 02:46:40 +0000 (22:46 -0400)]
lttng-sessiond(8): sort the option list by long option name
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Change-Id: Icaeabbb95fa650c059f208b1808f0b2cf3202117
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Fri, 3 Apr 2020 02:45:57 +0000 (22:45 -0400)]
lttng-relayd(8): mention the `--config` option
This patch does not document the configuration file's format. This work
is reserved for a future patch.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Change-Id: If36dcaf244e194b58c1e6cacbe0e771176ac2045
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 7 Apr 2020 04:46:39 +0000 (00:46 -0400)]
Fix: lttng-load: support legacy PID tracker specification
The 2.12 release changes the way tracked process attributes are
expressed in the MI and save/restore formats. While the MI schema was
bumped to 4.0, the save/restore schema only undergoes a minor bump to
accomodate existing users.
The original commit introducing this change justified the breaking
change as saved PIDs being fairly unlikely. However, even the
'INCLUDE_ALL' policy will specify a 'trackers' node, which no longer
existed and made all existing configurations incompatible.
A legacy load path is introduced to support the former PID tracker
serialization format and preserve the compatibility with existing
configurations.
Configurations generated by the 2.11 releases are included to test
this new legacy path.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ied6532c42cb2d1a5c9e39785cc4e47aaf89b8288
Jérémie Galarneau [Tue, 7 Apr 2020 04:14:00 +0000 (00:14 -0400)]
Fix: sessiond: invalid session configuration on EXCLUDE_ALL policy
Saving a session with a process attribute tracker that uses the
`EXCLUDE_ALL` policy results in an invalid session configuration.
Currently, a tracker of the following form is produced:
<process_attr_values>
<vpid/>
</process_attr_values>
This is invalid as per the XSD as 'vpid' is not a list; it is an
individual tracked attribute.
The appropriate '<process_attr_values/>' empty node is now produced.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ia31e276fe7246a89e72d6808c9ed960fb04f1b3a
Jérémie Galarneau [Mon, 6 Apr 2020 16:39:17 +0000 (12:39 -0400)]
Fix: relayd: unchecked allocation result of unlinked file pool
`pool` is not checked for NULL after its allocation. Error out
if the allocation fails.
In lttng_unlinked_file_pool_create: Return value of function which
returns null is dereferenced without checking (CWE-476)
Reported-by: Coverity Scan
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I2a7717701cf3d11de557b9ecdc6609c1f6a1fd6f
Francis Deslauriers [Fri, 3 Apr 2020 18:57:55 +0000 (14:57 -0400)]
lttng-crash: use `spawn_viewer()` to launch trace viewer
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: I59f8d6c1189b3b3b4cfd0704ff2c8eb22e6df44f
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Fri, 3 Apr 2020 18:21:25 +0000 (14:21 -0400)]
lttng-view: clean-up: move `--viewer` code to specific file
This code will be reuse by the lttng-crash utility.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: Ide72ad08577d55bbf2f7833d46e734b8a680c9d2
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Thu, 2 Apr 2020 21:27:03 +0000 (17:27 -0400)]
lttng-crash: clean-up: fix alignment of format string
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: I893a8ab7cbc0ad35a4ebabcf5017dbc83be1efc3
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Thu, 2 Apr 2020 20:16:59 +0000 (16:16 -0400)]
lttng-view: clean-up: rename `parse_options()` -> `parse_viewer_option()`
This seems more representative of what this function does.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: I78e4282a13048f4a35df4ddeae91b89969b73941
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Fri, 27 Mar 2020 01:11:35 +0000 (21:11 -0400)]
Fix: python: suppress -Wmissing-prototypes warning with SWIG 3.0.10
SWIG 3.0.10 is used on SLES 12. It produces this warning:
CC lttng_wrap.lo
lttng_wrap.c:3411:1: error: no previous prototype for ‘SWIG_strnlen’ [-Werror=missing-prototypes]
3411 | SWIG_strnlen(const char* s, size_t maxlen)
| ^~~~~~
SWIG_strnlen is defined like this:
size_t
SWIG_strnlen(const char* s, size_t maxlen)
{
...
}
Since the function is not static and has no previous declaration, the
diagnostic is emitted. We can see that they have fixed it in SWIG
3.0.12, where the same function is defined as:
SWIGINTERN size_t
SWIG_strnlen(const char* s, size_t maxlen)
{
...
}
SWIGINTERN is defined as static.
We can workaround the warning by adding our own declaration for
SWIG_strnlen in lttng.i(.in).
Tested by build with SWIG 3.0.10, 3.0.11 and 3.0.12.
Change-Id: I7d9d93cf5fc04f2044a47ad384e16d726e27f72f
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Thu, 2 Apr 2020 20:04:49 +0000 (16:04 -0400)]
lttng-view: clean-up: use singular form for type name
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: Ibeb6363def3579761e9a5a4cb76f7c6ca22d6146
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Thu, 2 Apr 2020 20:00:14 +0000 (16:00 -0400)]
lttng-view: clean-up: remove references to LTTv
Those comments are not relevant anymore and were missed by the following
clean-up commit:
commit
6dd26587e926671cdec2545b7d3db74cbd6a7cd8
Author: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Date: Thu Jan 30 12:01:57 2020 -0500
lttng-view: clean-up: remove commented and unused references to lttv
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: Ie68614c8160f62a2c045153b377f036a4399ad87
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Fri, 3 Apr 2020 19:05:37 +0000 (15:05 -0400)]
Fix: relayd: harmonize path format in backward-compat mode
Observed issue
==============
Currently, the relay daemon produces the following path formats
depending on the whether a tracepath is provided, the version of the
session daemon peer, and the grouping option specified on launch of
the relay daemon.
Hostname grouping, no custom trace path
pre 2.11: $BASE/$SHOSTNAME/$SESSION-$DATETIME
2.12: $BASE/$SHOSTNAME/$SESSION-$DATETIME
Hostname grouping, custom trace path
pre 2.11: $BASE/$HOSTNAME/$TRACEPATH
2.12: $BASE/$HOSTNAME/$TRACEPATH
Tracing session grouping, no custom trace path
pre 2.11: $BASE/$SESSION/$HOSTNAME-$DATETIME
2.12: $BASE/$SESSION/$HOSTNAME-$DATETIME
Tracing session grouping, custom trace path
pre 2.11: $BASE/$SESSION/$HOSTNAME/$TRACEPATH
2.12: $BASE/$SESSION/$HOSTNAME-$DATETIME/$TRACEPATH
As you can see, there is a single case where the format
diverges based on the version of the session daemon.
Cause
=====
Pre-2.11 session daemons do not transmit a session creation time when
a TRACEPATH is specified as part of the streaming url (e.g.
`lttng create my_session --set-url net://localhost/a_path`)
Hence, the backward compatibility path formatting code does not
insert a "DATETIME" string in the resulting path.
Solution
========
The relay daemon samples the time when it creates its session and that
time is formatted into the DATETIME representation if no DATETIME is
present in the path provided by pre-2.11 peers.
Drawbacks
=========
Sampling the relay session creation time will not yield the exact same
behaviour as what a 2.11+ peer would produce, but it is a reasonable
approximation for most use-cases.
Users depending on this time being the exact same as that sampled by
the session daemon will need to adapt tools anyhow if they use the new
--group-output-by-session option, so the change doesn't introduce more
problems.
This behaviour can be surprising when snapshots are streamed by
pre-2.11 peers as the session creation DATETIME will be different for
all snapshots. This is not ideal, but still less jarring than getting
a completely different path format depending on a peer's version.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I3316aa35a34985e83ae759851af3a899b0011789
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Fri, 3 Apr 2020 14:43:18 +0000 (10:43 -0400)]
Bump session.xsd version to 2.12
The session schema has changed to include new tracked process
attributes. This change is technically non-backward compatible if
tracked PIDs were saved.
As it is extremely unlikely that anyone saves PIDs to a session
configuration to load it in another lttng-tools version, the schema
does not allow the pre-2.12 PID tracking specification to be
expressed. In my opinion, this is unlikely enough not to warrant a
major version bump.
This can be changed if someone really encounters this in the wild or
has a legitimate use case for going through this trouble.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I8fd8dac02065b09c3e3c75b38699caea3223ce50
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Thu, 2 Apr 2020 19:32:59 +0000 (15:32 -0400)]
lttng-relayd(8): normalize style and add details
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Change-Id: Ifd2e90686bf9955f0c68fe158c60344d346814d0
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Thu, 2 Apr 2020 19:03:15 +0000 (15:03 -0400)]
doc/man: refer to Babeltrace 2 instead of Babeltrace 1
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Change-Id: Icafd69f28304b14e49e8cf8e21d2c6ebe3e319b6
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Thu, 2 Apr 2020 18:44:36 +0000 (14:44 -0400)]
lttng-clear(1): normalize style and add details
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Change-Id: I50709df27a04bbb5f300c734b9a85ae3a7c311c2
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Tue, 31 Mar 2020 03:24:24 +0000 (23:24 -0400)]
Fix: filter-grammar-test: add dependencies between steps
If the user specifies only the -B switch of the filter-grammar-test
program, the program will try to print the bytecode without having
generated it first, leaving to a segfault. Similarly, if the user
specifies only the -b switch, the program will try to generate the
bytecode from the IR, without having generated the IR first, also
leading to a segfault.
This patch adds some kind of dependency between the steps, such that if
the user is interested in a particular step (let's say, print the
bytecode), all the required steps will also be done.
Change-Id: Idc365a12b992a950566f227759fd3223cf5c5fd8
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Thu, 2 Apr 2020 19:47:30 +0000 (15:47 -0400)]
Fix: relayd: assertion fails on creation of session by peer < 2.11
Observed issue
==============
An assertion that a chunk has no active directory handle fails when
creating an anonymous chunk. More specifically, this occurs when
associating an fd tracker to the newly created anonymous trace chunk.
This occurs when a session is created by a peer that is older than
2.11.
Cause
=====
Trace chunks that should monitor their file descriptors with a file
descriptor tracker must be associated with the tracker before any
other operation occurs on the chunk. This is to ensure that "raw" file
descriptors are not created when they were meant to be tracked.
Here, the credentials and session output directory are set before the
file descriptor tracker was provided to the anonymous chunk which is a
breach of the API contract (enforced by the assert()).
Solution
========
Associate the fd tracker immediately to the anonymous chunk before
providing it with a reference to the file descriptor
tracker. Moreover, a leak of the output_directory is prevented by not
setting it to NULL. The trace chunk will acquire a reference to the
trace chunk; it is not transferred to the trace chunk.
Note
====
The problem was introduced during the 2.12 release cycle (clear
feature); this doesn't need to be backported.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I92ca2f156f500dfe02e09f8b4783447e46710246
Jérémie Galarneau [Thu, 2 Apr 2020 18:08:12 +0000 (14:08 -0400)]
Fix: relayd: crash on creation of session by peer < 2.11
Observed issue
==============
A NULL pointer dereference occurs during the creation of
a session that is associated with a peer older than 2.11.
The resulting backtrace follows:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x0000564af45b755b in lttng_trace_chunk_set_as_owner (chunk=0x7f8ca8004730, session_output_directory=0x7f8ca8004680) at trace-chunk.c:1033
1033 if (chunk->path[0] != '\0') {
[Current thread is 1 (Thread 0x7f8cb808d700 (LWP 7300))]
#0 0x0000564af45b755b in lttng_trace_chunk_set_as_owner (chunk=0x7f8ca8004730, session_output_directory=0x7f8ca8004680) at trace-chunk.c:1033
#1 0x0000564af45a6a78 in session_set_anonymous_chunk (session=0x7f8ca8001380) at session.c:229
#2 session_create (session_name=<optimized out>, hostname=<optimized out>, base_path=<optimized out>, live_timer=<optimized out>, snapshot=<optimized out>,
sessiond_uuid=<optimized out>, id_sessiond=<optimized out>, current_chunk_id=<optimized out>, creation_time=<optimized out>, major=<optimized out>,
minor=<optimized out>, session_name_contains_creation_time=<optimized out>) at session.c:416
#3 0x0000564af459207e in relay_create_session (conn=0x7f8ca0000f60, payload=<optimized out>, recv_hdr=<optimized out>) at main.c:1428
#4 0x0000564af4594f12 in relay_process_control_command (payload=0x7f8cb808c940, header=0x7f8ca0001000, conn=0x7f8ca0000f60) at main.c:3218
#5 relay_process_control_receive_payload (conn=0x7f8ca0000f60) at main.c:3361
#6 0x0000564af45980b0 in relay_process_control (conn=0x7f8ca0000f60) at main.c:3478
#7 relay_thread_worker (data=<optimized out>) at main.c:3927
#8 0x00007f8cbba9a46f in start_thread () from /usr/lib/libpthread.so.0
#9 0x00007f8cbb9ca3d3 in clone () from /usr/lib/libc.so.6
Cause
=====
lttng_trace_chunk_set_as_owner() correctly handles the case
where a trace chunk has no output path, but expects the path
to be an empty string rather than being NULL.
This is not correct as an anonymous chunk, created in backward
compatibility mode when interacting with older peers, has no
path; the path is transmitted as part of the streams' attributes
upon their creation.
Solution
========
Simply check for a NULL pointer in the same place where the empty
chunk path string is created. The rest of the code in trace-chunk.c
doesn't assume that the chunk's path is non-NULL.
Note
====
The problem was introduced during the 2.12 release cycle (clear
feature); this doesn't need to be backported.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Iaeb41e1648d61fbbe78d70b21191fd6d720900df
Jérémie Galarneau [Thu, 2 Apr 2020 04:57:38 +0000 (00:57 -0400)]
Fix: consumer: fallback to flush when flush empty is unsupported
Session destruction fails on older (<= 2.8) lttng-modules as the
flush_empty fails on the kernel streams during the quiet rotation.
Fallback to the regular flush as the semantics of regular rotations
are not expected here; we merely want to flush any pending data and
destroy the session.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ifdf8a4e60b55dbf582747d71f5c2485d24c11964
Jérémie Galarneau [Thu, 2 Apr 2020 04:45:21 +0000 (00:45 -0400)]
Fix: consumerd: incorrect clear logging statement
A logging statement was apparently copy-pasted from the rotation code
and not adapted for the consumer_clear_buffer command and would
indicate that a flush operation failed when a clear operation was
performed.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I909a391fbd8b8bf48c7481d394571ad19d7f6332
Jérémie Galarneau [Thu, 2 Apr 2020 04:25:11 +0000 (00:25 -0400)]
Fix: sessiond: error reported on session destruction for old modules
The session destruction command will return
-LTTNG_ERR_ROTATION_NOT_AVAILABLE_KERNEL when the kernel tracer
version does not support packet sequence numbers which prevents
rotations from being performed.
It is okay to not perform an implicit rotation in this case since we
know that no rotations have occurred during the session's lifetime (as
it is not supported). Thus, the client/library only needs to stop the
session, wait for pending data, and destroy the session.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ibccf73f08eecb6431ea3cc358bf8dd6af3ba4427
Jérémie Galarneau [Thu, 2 Apr 2020 02:16:32 +0000 (22:16 -0400)]
Fix: sessiond: erroneous error code returned on rotation failure
`LTTNG_ERR_KERN_CONSUMER_FAIL` is returned by the kernel domain
rotation handling code. This code is associated with a failure to
launch the kernel consumer daemon which is not the case here.
The `LTTNG_ERR_ROTATION_FAIL_CONSUMER` is used instead and returned to
the client.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ifdc9e46addcc4dc7ca2002d6dff5b2d7ac6c31f3
Jérémie Galarneau [Wed, 1 Apr 2020 22:34:59 +0000 (18:34 -0400)]
Fix: lttng-destroy: missing newline on session destruction message
The lost packets/discarded events statistics are printed on the same
line as the session destruction progress message when the session is
stopped as part of the `destroy` command.
This is a consequence of printing the statistics as they are
retrieved; the statistics must be fetched before the destruction,
but the progress indicator is still being printed.
The statistics output is now formatted to a buffer and printed
after the session's destruction has completed.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I2105056b109774a57c83be3e30984038880c0fb7
Jérémie Galarneau [Wed, 1 Apr 2020 20:16:05 +0000 (16:16 -0400)]
relayd: clean-up: reference is repeated in comment
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I2d963d5a3c0a2980eb745780b342b1fa9b14184d
Michael Jeanson [Wed, 1 Apr 2020 19:13:54 +0000 (15:13 -0400)]
Typo: 'Descritptor' -> 'Descriptor'
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Change-Id: I3b616777c9d39e23b84224cb1a6a92fa43fceb45
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Michael Jeanson [Wed, 1 Apr 2020 19:09:22 +0000 (15:09 -0400)]
Typo: 'Accomodate' -> 'Accommodate'
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Change-Id: I1f5408d82546db7df14d4899d4d2c52ec1421b52
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Wed, 1 Apr 2020 14:51:56 +0000 (10:51 -0400)]
Clean-up: trace-ust comment still refers to only PID trackers
An application must meet all process attribute trackers restrictions
to be traced.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I9d8cd00b95c7db70ebf4fe91d6aea60646e3c525
Jérémie Galarneau [Tue, 31 Mar 2020 02:10:36 +0000 (22:10 -0400)]
Fix: tracker: NULL pointer dereference after NULL check
value_view can be NULL and must thus be checked before use.
Moreover, the fix introduced in
1ad5cb59 is erreneous: the
function must validate that either:
- value is a 'name' type, value_view is not null, and not len == 0,
- value is an integer and value_view does not contain more data.
In process_attr_value_from_comm: Pointer is checked against null but
then dereferenced anyway (CWE-476)
Reported-by: Coverity Scan
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ia130ef57e10118960f1023338b90f7a10d588ee2
Jérémie Galarneau [Fri, 27 Mar 2020 15:27:13 +0000 (11:27 -0400)]
Fix: sessiond: NULL pointer dereference after NULL check
The process attribute value deserialization allows the buffer view to
be NULL when the value's type is not USER_NAME nor GROUP_NAME. This is
not checked when ensuring that no string is passed (len == 0) in the
case of integral values.
A NULL check is added to the condition.
Reported-by: Coverity Scan
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I343f747c325f739196284dadd3c407cfb4084268
Jérémie Galarneau [Fri, 27 Mar 2020 15:07:10 +0000 (11:07 -0400)]
Fix: sessiond: missing goto in error handler
The trace_ust inclusion set add/remove methods do not jump to the
end label after checking the `tracker` variable. This can result
in a NULL pointer dereference when an invalid process attribute
is specified.
The same problem appears in save_process_attr_trackers() and
process_attr_value_from_comm().
The missing jump (goto) is added in all cases.
Reported-by: Coverity Scan
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I473e008e5330a4c3820c8ab7c57ce4f2961e79b2
Jérémie Galarneau [Fri, 27 Mar 2020 15:01:05 +0000 (11:01 -0400)]
Fix: sessiond: user/group name can be leaked on malformed command
process_attr_value_from_comm() can leak a copy of the user/group
name when the value type is erroneous. This is not reachable in
"normal" execution, but could be triggered by invalid "crafter"
lttng-ctl commands.
In process_attr_value_from_comm: Leak of memory or pointers to
system resources (CWE-404).
Reported-by: Coverity Scan
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I7ef55c0743c954a93e3d27ce17e6478708b49437
Simon Marchi [Wed, 25 Mar 2020 22:40:02 +0000 (18:40 -0400)]
configure: add -Wmissing-declarations, -Wmissing-prototypes, and more
Here's the rationale for each:
- -Wmissing-declarations: Make sure the definition of a function can
"see" a corresponding (usually in a header file), if it isn't static.
This makes sure that the declaration and definition don't go out of
sync, which can lead to hard to debug problems (because it still
builds, but the function doesn't receives what it thinks it receives).
On top of pointing out out-of-sync declarations, it can help point out
that a foo.c file misses including its header foo.c, or that a
function should actually be made static.
- -Wmissing-prototypes: makes sure that functions without parameters are
declared as `foo(void)` instead of `foo()`. In C, the former declares
a function that takes no parameters, whereas the latter declares a
function without specifying its parameters. The latter could be
called with any number of parameters, which is a recipe for confusion.
- -Wmissing-parameter-type, -Wold-style-definition,
-Wold-style-declarations, -Wstrict-prototypes: makes sure there's no
function declared with parameters without types specified, or using
the old style:
int foo(bar)
int bar;
{
...
}
Unlikely, but there's no harm in enabling them.
Change-Id: I7ddf5ff61b4466c0bd7b03485ef29156c399e2a8
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Wed, 25 Mar 2020 22:39:56 +0000 (18:39 -0400)]
Fix: sessiond: make the --without-lttng-ust version of launch_application_notification_thread static
When building with --without-lttng-ust, a simple version of
launch_application_notification_thread, implemented in the header file,
is used. We get this warning:
CC main.o
In file included from /home/simark/src/lttng-tools/src/bin/lttng-sessiond/main.c:61:
/home/simark/src/lttng-tools/src/bin/lttng-sessiond/notify-apps.h:17:6: error: no previous prototype for ‘launch_application_notification_thread’ [-Werror=missing-prototypes]
17 | bool launch_application_notification_thread(int apps_cmd_notify_pipe_read_fd)
| ^~~~~~~
Make the function `static inline` to avoid that. The `inline` is not
strictly required here, but if that header ended up included by some
other source file that didn't use
launch_application_notification_thread, we would get a -Wunused-function
warning. The `inline` avoids that.
Change-Id: I19605e0594af0d7997951def2da3a6313bf65e11
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Wed, 25 Mar 2020 22:39:52 +0000 (18:39 -0400)]
Fix: tests: include callsites.h from callsites.c
In commit:
commit
f12eb9c1ceb619db54be0842323a32cda12651cd
Author: Simon Marchi <simon.marchi@efficios.com>
Date: Mon Nov 25 16:41:29 2019 -0500
Fix all -Wmissing-declarations warning instances
I've fixed the -Wmissing-declarations warning in callsites.c by adding a local
declaration. That was wrong, since there is actually a callsites.h header file
that needs to be included, which contains the declaration. This is nicely
pointed out when building with clang and -Wstrict-prototypes:
CC exec_with_callsites-multi-lib-test.o
In file included from /home/simark/src/lttng-tools/tests/regression/ust/multi-lib/multi-lib-test.c:15:
/home/simark/src/lttng-tools/tests/regression/ust/multi-lib/callsites.h:10:21: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
void call_tracepoint();
^
void
Remove the local declaration and include callsites.h in callsites.c.
Change-Id: Ib656d96c2ed3b389697a2022e343e98ac0b66447
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Wed, 25 Mar 2020 22:39:48 +0000 (18:39 -0400)]
Fix: relayd: cast idigit argument to unsigned char
This diagnostic is emitted when building on cygwin:
main.c:233:34: warning: array subscript has type ‘char’ [-Wchar-subscripts]
233 | if (errno != 0 || !isdigit(arg[0])) {
| ~~~^~~
This is due to passing a `char` argument to isdigit. According to the
man page of isdigit, the arguments of type `char` must be cast to
`unsigned char`, so they are able to represent the EOF value. This
patch does that, and should get rid of the warning.
Change-Id: Iaed4c0b494a79b917761e65f18388f43478b97e1
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Wed, 25 Mar 2020 22:39:43 +0000 (18:39 -0400)]
Fix: tests: make some functions static
Make two functions static, they are only used in their respective file.
Change-Id: I022dd064249683c9414ab36602e9645865373c51
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Wed, 25 Mar 2020 22:39:39 +0000 (18:39 -0400)]
Fix: tests: add `void` parameter to functions that take no parameters
In C, empty parenthesis declare a function without a prorotype (without
specifying its parameters). This is not the same as having a `void`
parameter, which declares a function which has no parameters.
It's safer to use the later, otherwise it makes it possible to
erroneously call the function with some arguments.
Change this `test_function` to add `void`. It fixes diagnostics like:
CC userspace-probe-elf-binary.o
/home/simark/src/lttng-tools/tests/utils/testapp/userspace-probe-elf-binary/userspace-probe-elf-binary.c:12:33: error: no previous prototype for ‘test_function’ [-Werror=missing-prototypes]
12 | void __attribute__ ((noinline)) test_function()
|
Change-Id: Iceb7636e44d45f51889667ec76f2c04c032b5df8
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Wed, 25 Mar 2020 22:39:35 +0000 (18:39 -0400)]
Fix: common: make lttng_trace_chunk_remove_subdirectory_recursive static
This function is only used in this file, make it static. Fixes this
diagnostic:
CC trace-chunk.lo
/home/simark/src/lttng-tools/src/common/trace-chunk.c:1498:5: error: no previous prototype for ‘lttng_trace_chunk_remove_subdirectory_recursive’ [-Werror=missing-prototypes]
1498 | int lttng_trace_chunk_remove_subdirectory_recursive(struct lttng_trace_chunk *chunk,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: I19e03b64557ce845b94f02fcf0d6fbafba654d95
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Wed, 25 Mar 2020 22:39:30 +0000 (18:39 -0400)]
Fix: common: add `void` parameter to log_add_time declaration
It makes it match the definition and fixes this warning:
CC error.lo
/home/smarchi/src/lttng-tools/src/common/error.c:33:13: error: no previous prototype for ‘log_add_time’ [-Werror=missing-prototypes]
const char *log_add_time(void)
^~~~~~~~~~~~
Change-Id: Ibbf5eebd8171504bc7050c754e2a5d113b6b5387
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 10 Mar 2020 20:01:56 +0000 (16:01 -0400)]
CONTRIBUTING.md: harmonize list style with the rest of the docs
Append full stops (periods, for our non-British friends) and
capitalize list elements as they are complete sentences on their own.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I7646cafa8a23a3dc6cfabea2dd5a54ce244eb2b3
Jérémie Galarneau [Tue, 10 Mar 2020 17:22:02 +0000 (13:22 -0400)]
CONTRIBUTING.md: clarify the guidelines for commit messages
In order to streamline the code review process, I am adding a more
detailed explanation of the desired commit message format.
Of note, the commit title format `Fix: sub-system`, used informally
for a couple of months, is adopted for bug fixes. A template of the
sections expected in the commit message body of those patches is also
included.
More general guidelines are also added for feature contributions.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Id0097949ca984e88367e8e78cb6111adb30c5b99
Jérémie Galarneau [Mon, 23 Mar 2020 23:12:26 +0000 (19:12 -0400)]
Fix: lttng-list: don't warn when the kernel domain has no channels
Some commands beside lttng-enable-channel have the side-effect of
creating a domain. For instance, the lttng-track and lttng-untrack
commands will implicitly create their target domains if they don't
exist. Thus, it is not unexpected for a domain to exist without
channels.
Currently, tracking process attributes in the user space and kernel
domains will result in a warning being printed when lttng-status
(or lttng-list `the_session`) is invoked.
Example output:
Tracing session arielle_bolduc: [inactive]
Trace output: /home/jgalar/lttng-traces/arielle_bolduc-
20200323-191128
=== Domain: Linux kernel ===
Tracked process attributes
Process IDs: all
Virtual Process IDs: 12365, 526, 41
User IDs: all
Virtual User IDs: all
Group IDs: all
Virtual Group IDs: all
Warning: No kernel channel
=== Domain: User space ===
Buffering scheme: per-user
Tracked process attributes
Virtual Process IDs: 12365, 526, 41
Virtual User IDs: all
Virtual Group IDs: all
The warning is removed since it can only confuse users.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I733ee6c3d8c1d297194842c7bdbdf3f237661e51
Jérémie Galarneau [Tue, 17 Mar 2020 20:14:30 +0000 (16:14 -0400)]
Refactor: lttng-ctl: follow terminology of the tracker documentation
This commit harmonizes the process attribute tracker API and
serialization formats (save/restore and MI) with the documentation
with regards to the terminology used.
The message of the parent commit adjusting the manual pages of the
lttng-track and lttng-untrack commands details those terminology
changes and their rationale.
Some problems with the API introduced during the 2.12 development
cycle are also adressed:
Type safety:
- The process attribute tracker is made type safe with regards
to the platform's native types to express process
attributes. Where the original API casted all integral values to
integers, this change introduces accessors for all process
attribute types (pid_t, uid_t, gid_t). This makes it easier to
use the API safely and without producing warnings in user's
code.
Another benefit of adopting this explicit type-safe approach is
that is will make it easier to add new attributes which are not
expressible (or non-ambiguously expressible) using `int` and
`string` types (e.g. tracking a virtual PID within a given
namespace).
Ambiguity of INCLUDE_ALL, EXCLUDE_ALL, and INCLUDE_SET states:
- The original tracker API has a notion of 'enabled' pid_tracker
which is confusing to users:
- enable = 0: everything is tracked,
- enable = 1: a list of tracked pids is provided, which may be
empty.
- pid '-1' is *special* and tracks or untracks everything.
This was replaced with a 'special' opaque value meaning 'ALL'
which, while being clearer, was still confusing and hard to
document.
The revised API explicitly expresses the notion of a tracking
policy (`enum lttng_tracking_policy`). When that policy is set
to `LTTNG_TRACKING_POLICY_INCLUDE_SET`, the inclusion set can
be queried and/or mutated.
On top of being clearer, this aligns more closely with the
internal lttng-sessiond daemon API which gets rid of a lot
of code to handle those special cases. The resulting code is
more verbose, but a lot easier to understand.
Moreover, the types introduced (e.g. lttng_process_attr_values)
are meant to be re-used if a new
`LTTNG_TRACKING_POLICY_EXCLUDE_SET` tracking policy is added in
the future.
Documentation:
- The revised API includes a complete documentation. It documents
the API usage, but also adds implementation notes such explicitly
mentionning when/where user names and group names are resolved.
Client:
- While making the changes to use this new API, some error messages
are clarified (or added). The resulting output when listing the
trackers was also changed to be more compact.
The CLI output now also makes use of the terminology used in
the documentation for all commands interacting with process
attribute trackers.
It is now also possible to specify multiple process attribute
trackers along with the --all option for the lttng-track and
lttng-untrack command. For instance: `lttng tracker --userspace
--vpid --vuid --all` is now allowed.
The same process attribute tracker can also be specified more than
once in a command, as follows:
`lttng track --userspace --vpid 43,11 --vpid 55,77`
Since the serialization had been changed during the 2.12 cycle, I
changed them further to use the API's terminology in the element
names.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I5f0ea2849eb024ea6944b2ee7dbadfd893cc0be4
Jérémie Galarneau [Fri, 20 Mar 2020 21:27:00 +0000 (17:27 -0400)]
lttng: list: replace domain headers with the official names
The lttng-list command uses the following domain headers
when printing domain listings:
- `Kernel`
- `UST global`
- `JUL (Java Util Logging)`
- `LOG4j (Logging for Java)`
- `Python (logging)`
Those don't match the official project names and/or names
used in the LTTng online documentation.
They are replaced by:
- `Linux kernel`
- `User space`
- `java.util.logging (JUL)`
- `log4j`
- `Python logging`
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I549b309eebf0d00dfaacbed00e263f4e5e3d718b
Jérémie Galarneau [Fri, 20 Mar 2020 21:17:34 +0000 (17:17 -0400)]
lttng: list: print `per-user` and `per-process` buffer types
The lttng-list command prints `per UID` and `per PID` for the
buffer type which is inconsistent with the terms used in the
documentation.
Moreover, `Buffer type` is replaced by `Buffering scheme` for
the same reason.
Change the print-out to match the online documentation.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Id20098386ec0369fae017d01786ecc13c78820c0
Jérémie Galarneau [Wed, 4 Mar 2020 21:37:32 +0000 (16:37 -0500)]
Docs: overhaul of lttng-track(1) and lttng-untrack(1)
- Replace the term whitelist by "inclusion set"
The use of whitelist (and its counterpart, blacklist) is somewhat
controversial and doesn't align with the terms used in the tracker
API.
The "inclusion set" nomenclature is inspired by that used by ACL,
namely "include list" and "exclude list". Set is preferred to list
as there is no implied notion of order.
- Adapt process attribute descriptions
The process attribute descriptions were apparently copy-pasted from
the original PID description (all are referencing "process IDs").
A suitable description is added for each process attribute.
- Add new process attributes to lttng-untrack(1)
The lttng-untrack man page was not updated when the resource types
introduced in LTTng 2.12 were added to lttng-track(1).
- Group all process attributes with their 'virtual' counter-parts
The order in which process attributes were described was: pid, uid,
gid, vpid, vuid, vgid.
Grouping process attributes with their virtual counterpart (e.g. pid
followed by vpid) makes it easier to understand the difference at a
glance.
The order becomes: pid, vpid, uid, vuid, gid, vgid
- Remove all PID-specific wordings in lttng-untrack(1)
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I46486c4e90003da3e860682f6c22a0e4a154492b
Jérémie Galarneau [Thu, 19 Mar 2020 01:02:03 +0000 (21:02 -0400)]
Fix: MI: bump MI schema version to 4.0 in mi-lttng.c
The MI schema has been bumped to 4.0, but the internal constant
in mi-lttng.c still indicates a 3.0 schema. Synchronize both
versions to 4.0 for the 2.12 release.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ia27e15e2c154b2fd39eeaaa6c71df922a233bc80
Jérémie Galarneau [Thu, 5 Mar 2020 21:52:32 +0000 (16:52 -0500)]
Fix: sessiond: occasional badfd error on repeated SIGTERM
The session daemon occasionally prints the following messages
when it received multiple SIGTERM signals:
PERROR - 16:50:18.
505585257 [49845/49845]: write poll pipe: Bad file
descriptor (in notify_thread_pipe() at utils.c:35)
This is caused by a (somewhat inevitable) race between the teardown of
the daemon and the closing of its quit pipe. This happens more often
when kernel modules take a long time to be unloaded and the user
spams ctrl+c in the hope of convincing the daemon process to close
faster since modules are unloaded after closing the quit pipe.
Setting closed pipe fds to '-1' is safe anyway and is already
handled by the notify_thread_pipe() util.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: If08a455c65055dcb56ffbad3703173e6a45cfba5
Jérémie Galarneau [Wed, 4 Mar 2020 23:27:28 +0000 (18:27 -0500)]
Fix: lttng: incorrect domain list printed when no domain is provided
The following commands make use of a common utility function to
validate the count of domains specified and print an error when it
is invalid:
- lttng-enable-event,
- lttng-disable-event,
- lttng-track,
- lttng-untrack,
- lttng-add-context,
- lttng-enable-channel,
- lttng-disable-channel.
Those commands do not allow the same domains to be used. In fact, they
all expect --kernel or --userspace only, except for the
lttng-enable-event, lttng-disable-event, and lttng-add-context
commands which allow the --log4j, --jul, and --python domain options
to be used.
Currently, the error message when no domain is specified is incorrect
for all of those commands. The error reads as follows:
`Error: Please specify a domain (-k/-u/-j).`
For most commands, the -j option cannot be used. For those that allow
agent domains, the message is missing the -l and -p domains.
This ensures that the expected domains are printed for each of those
commands.
Moreover, the message is clarified by using the long form option
names.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I45aee075dbf6c62c4120bdeb06697b88b2d8716c
Simon Marchi [Thu, 13 Feb 2020 15:36:31 +0000 (10:36 -0500)]
Fix all -Wdiscarded-qualifiers warning instances
Change-Id: I85246856d284d5a2dad9609f5fb06d32a89dbb7c
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Tue, 17 Mar 2020 23:04:32 +0000 (19:04 -0400)]
Remove part of last name to fit in a 80 character line
It plays much more nicely with the .clang-format since it ensure that
the line stay inside the 80 column limit.
It also match my signed-off and other files already present in the
project.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Change-Id: Ib1ce1f101e9f24c03a05888b5fb1901341d8c005
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Tue, 17 Mar 2020 21:48:40 +0000 (17:48 -0400)]
Fix: Tests: trace path wildcards not expanded
Issue
=====
Some testcases related to `--live` sessions in
`tools/clear/{test_ust,test_kernel}` fail with the following error:
ls: cannot access '/tmp/tmp.gi1eVM3fZ9/tmp.dNL0WHRTQ3/ci-node-bionic-amd64-02-04/LUP49x7iV7xexehS*': No such file or directory
not ok 61 - Failed to list content of directory "/tmp/tmp.gi1eVM3fZ9/tmp.dNL0WHRTQ3/ci-node-bionic-amd64-02-04/LUP49x7iV7xexehS*"
FAIL: tools/clear/test_ust 61 - Failed to list content of directory "/tmp/tmp.gi1eVM3fZ9/tmp.dNL0WHRTQ3/ci-node-bionic-amd64-02-04/LUP49x7iV7xexehS*"
# Failed test 'Failed to list content of directory "/tmp/tmp.gi1eVM3fZ9/tmp.dNL0WHRTQ3/ci-node-bionic-amd64-02-04/LUP49x7iV7xexehS*"'
# in ./tools/clear//../../../utils/tap/tap.sh:fail() at line 159.
They fail because the wildcard character `*` is used in a path and is
not expanded when comes the time to list the content of the expanded
path.
In `--live` related tests, we use a wildcard in those paths because we
can't know the full name of the output directory as it's named by the
sessiond.
This bug was introduced (or rather not fixed) by the following commit:
commit
94360c17201a28466af49058735166c73f9ae130
Author: Francis Deslauriers <francis.deslauriers@efficios.com>
Date: Fri Mar 6 18:18:14 2020 -0500
Fix: Tests: utils.sh: merge `validate_{directory,folder_is}_empty` functions
Solution
========
Remove the double quotes around the path variable so that wildcards can
be expanded as expected.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: If4a72fab0d487cf6e6b021dfad9eca6d0d60d5f4
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Wed, 4 Mar 2020 21:18:37 +0000 (16:18 -0500)]
Fix: Tests: `gen-ust-events` doesn't error out on invalid option
Issue
=====
When running `gen-ust-events` with an invalid option:
./gen-ust-events -h
The `getopt_long()` function prints the following error:
./gen-ust-events: invalid option -- 'h'
which is very kind of it.
The problem is that the process keep running and go on to generate
events. It should exit right away.
Solution
========
Remove the `break` statement and so that we execute the `goto end`
right away.
Apply the same changes to `gen-ust-nevents`.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: Ib1c96f4c9ed8f98395bf842215f858a69db2bbf0
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Fri, 6 Mar 2020 23:18:14 +0000 (18:18 -0500)]
Fix: Tests: utils.sh: merge `validate_{directory,folder_is}_empty` functions
Issues
======
1. Both functions aim to do the same thing.
2. The current `validate_folder_is_empty` function uses an erroneous
way of checking if a folder is empty. `ls -A` returns zero on
success; it doesn't return the number of files and sub-folders. A
correct way to get the number of elements in a directory is to pipe
the output of `ls -A` to `wc -l`.
3. The `local_path` variable is used undefined in the current
`validate_directory_empty` function.
It just happens that the `local_path` variable is defined in all
but one of the callsites of this function so those calls work as
expected.
The other call to this function was
bogus (tests/regression/tools/clear/test_ust:323) because it uses
the `$TRACE_PATH` variable name.
Fixes
=====
- Merge both functions into one, keeping the name
`validate_directory_empty`,
- Fix the emptiness check,
- Fix usages of `validate_directory_empty` in tests.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: Id75baf16f42866e3b978389f9aada4a2f6b6f2ae
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Thu, 5 Mar 2020 19:09:51 +0000 (14:09 -0500)]
Fix: Tests: undefined `NR_USEC_WAIT` bash variable
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: I18eff11e47340245c595d4883f280d0fed23ca48
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Mon, 9 Mar 2020 14:49:51 +0000 (10:49 -0400)]
directory-handle: print `errno` reason on `unlinkat()` error
This is helpful while troubleshooting clear and rotation issues.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I92f9551a49fced7603c8dca832566de71b188528
Jonathan Rajotte [Tue, 3 Mar 2020 20:30:10 +0000 (15:30 -0500)]
Fix: lttng-ctl: _handle can be NULL
lttng_destroy_session_no_wait does not care for the returned handle
and passes a NULL _handle.
This leads to an immediate LTTNG_ERR_INVALID failure on
lttng_destroy_session_no_wait calls.
lttng_destroy_session_ext already performs a null check on _handle
before assigning it to transfer ownership of the handle.
Fixes #1241
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Change-Id: I9e8bee28382fa2250dee720037efdf77b4e776b8
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Mon, 9 Mar 2020 18:45:20 +0000 (14:45 -0400)]
Fix: sessiond: domain subdirectory not deleted on empty clear
Scenario
=====
$ lttng create
$ lttng enable-event -u -a
$ lttng start
// no events are produced.
$ lttng clear
Sessiond fails on clear with this message:
Error: Error removing subdirectory '.tmp_new_chunk' file when deleting
chunk
Cause
=====
The "ust" domain directory is still present preventing the removal of
the ".tmp_new_chunk" directory.
Solution
=====
Use lttng_trace_chunk_create_subdirectory, ensuring that the domain
folder is moved/deleted as necessary.
Fixes #1244
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Change-Id: I81d23ffc9f330f50f718957d460ee7a2718c95a1
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Thu, 13 Feb 2020 15:35:34 +0000 (10:35 -0500)]
Ignore -Wincomplete-setjmp-declaration warnings
We currently get this when building a test that requires UST:
make[4]: Entering directory '/home/smarchi/build/lttng-tools-clang/tests/regression/ust/linking'
CC tp.lo
In file included from /home/smarchi/src/lttng-tools/tests/regression/ust/linking/tp.c:11:
In file included from /home/smarchi/src/lttng-tools/tests/regression/ust/linking/./ust_tests_demo.h:38:
In file included from /home/smarchi/install/include/lttng/tracepoint-event.h:58:
In file included from /home/smarchi/install/include/lttng/ust-tracepoint-event.h:28:
In file included from /home/smarchi/install/include/lttng/ust-events.h:41:
/usr/include/pthread.h:744:12: error: declaration of built-in
function '__sigsetjmp' requires the declaration of the 'jmp_buf'
type, commonly provided in the header
<setjmp.h>. [-Werror,-Wincomplete-setjmp-declaration]
extern int __sigsetjmp (struct __jmp_buf_tag *__env, int __savemask) __THROWNL;
^
I'm not sure what we can do about it, and I believe the warning is
bogus. I do have a definition for the "jmp_buf" type in
/usr/include/setjmp.h:
typedef struct __jmp_buf_tag jmp_buf[1];
And even with I include <setjmp.h>, the warning does not go away. I'm
not sure if that's right, but this patch disables the warning.
Change-Id: Ibe7451dc0afc9aaca59431296d42011d9e4306f9
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Thu, 13 Feb 2020 15:36:04 +0000 (10:36 -0500)]
tests: put -no-pie in LDFLAGS instead of CFLAGS
When building with clang, we get:
make[4]: Entering directory
'/home/smarchi/build/lttng-tools-clang/tests/utils/testapp/gen-syscall-events-callstack'
CC gen-syscall-events-callstack.o
clang: error: argument unused during compilation: '-no-pie'
[-Werror,-Wunused-command-line-argument]
Indeed, -no-pie should be in LDFLAGS, not CFLAGS.
To make sure that Makefiles can use `AM_LDFLAGS += ...`, I have added
an AC_SUBST for AM_LDFLAGS in configure.ac. This makes it so that if
we ever set AM_LDFLAGS for real in configure.ac, the Makefiles won't
inadvertently overwrite that value.
Change-Id: I7bad985bb135e50750917db6a928f2705a85b445
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 10 Mar 2020 02:06:01 +0000 (22:06 -0400)]
Silence `POSIX Yacc` warnings
Flex/Bison warn that we make use of two non-POSIX directives,
%code and %define. Coincidentally, we don't use POSIX Yacc!
From the bison documentation, "[...] -Wno-yacc will hide the warnings
about POSIX Yacc incompatibilities." [1].
Thus, this flag is added to the YFLAGS.
YACC filter-parser.c
/home/jgalar/EfficiOS/src/lttng-tools/src/lib/lttng-ctl/filter/filter-parser.y:293.1-5:
warning: POSIX Yacc does not support %code [-Wyacc]
293 | %code provides
| ^~~~~
/home/jgalar/EfficiOS/src/lttng-tools/src/lib/lttng-ctl/filter/filter-parser.y:301.1-7:
warning: POSIX Yacc does not support %define [-Wyacc]
301 | %define api.pure
| ^
[1] https://www.gnu.org/software/bison/manual/html_node/Diagnostics.html
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Iaf65534bc47514d3a99b97ce414880a6afc723b9
Simon Marchi [Mon, 25 Nov 2019 20:32:19 +0000 (15:32 -0500)]
Fix -Wmissing-declarations warnings in filter-parser.y
Make gc_string_append and yyerror static, as they are only used in
this file.
Remove yywrap, apparently, it's not used. This probably has to do
with the fact that our lexer uses the noyywrap option.
setstring is used by filter-lexer.c (generated from filter-lexer.l),
which has its own local setstring declaration. This is not very good,
because the prototype of setstring could change in the implementation,
and the users of the function would still compile, but then it would
probably crash inexplicably at runtime.
Instead, put the declaration in filter-parser.h, using a "%code
provides" directive. That seems to be the intent of "%code provides"
[1]:
Purpose: This is the best place to write additional definitions and
declarations that should be provided to other modules.
[1] https://www.gnu.org/software/bison/manual/html_node/_0025code-Summary.html
Change-Id: I04ce69ae9808b72e96bf9e602772f0e5758dfc10
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Mon, 25 Nov 2019 20:39:22 +0000 (15:39 -0500)]
Include cmd-2-2.h in cmd-2-1.h
Fixes:
CC cmd-2-2.o
/home/smarchi/src/lttng-tools/src/bin/lttng-relayd/cmd-2-2.c:36:5:
error: no previous declaration for ‘cmd_recv_stream_2_2’
[-Werror=missing-declarations] int cmd_recv_stream_2_2(const
struct lttng_buffer_view *payload, ^~~~~~~~~~~~~~~~~~~
... and helps ensure that the declarations are in sync with the
definitions.
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Change-Id: I889d7306c157b0d68d24bf610fce18c8949422d8
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Mon, 25 Nov 2019 21:00:56 +0000 (16:00 -0500)]
Make create_file function static in gen-ust-tracef.c
Fixes:
CC gen-ust-tracef.o
/home/smarchi/src/lttng-tools/tests/utils/testapp/gen-ust-tracef/gen-ust-tracef.c:36:6:
error: no previous declaration for ‘create_file’
[-Werror=missing-declarations] void create_file(const char *path)
^~~~~~~~~~~
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Change-Id: I12359b30054da609be2aca998de960719120083e
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Mon, 25 Nov 2019 21:16:32 +0000 (16:16 -0500)]
Make remove_file_from_hierarchy function static in test_directory_handle.c
Fixes:
CC test_directory_handle.o
/home/smarchi/src/lttng-tools/tests/unit/test_directory_handle.c:139:5:
error: no previous declaration for ‘remove_file_from_hierarchy’
[-Werror=missing-declarations] int
remove_file_from_hierarchy(struct
lttng_directory_handle *test_dir_handle,
^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Change-Id: I060a89d88f2de8e12368496968708d273cb318f2
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Mon, 25 Nov 2019 21:17:37 +0000 (16:17 -0500)]
Make fd_count function static in test_fd_tracker.c
Fixes:
CC test_fd_tracker.o
/home/smarchi/src/lttng-tools/tests/unit/test_fd_tracker.c:65:5:
error: no previous declaration for ‘fd_count’
[-Werror=missing-declarations] int fd_count(void) ^~~~~~~~
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Change-Id: I02775d5d601211052b4cad323bc33623beabc8f9
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Mon, 25 Nov 2019 21:21:52 +0000 (16:21 -0500)]
Add declarations for exported functions in health_exit.c
Silences a bunch of -Wmissing-declarations warnings.
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Change-Id: Ib8ca00c2f9eaeec1821a15c3978d988e58804367
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
This page took 0.056141 seconds and 5 git commands to generate.