Nick Clifton [Thu, 2 Apr 2015 14:28:02 +0000 (15:28 +0100)]
Fix the binutils readelf.ss test for the AArch64 target.
* binutils-all/readelf.ss-64: Move possible location of the $d
mapping symbol.
Andrew Turner [Thu, 2 Apr 2015 14:07:27 +0000 (15:07 +0100)]
Add support for configuring an aarch64-freebsd target.
ld * Makefile.am: Add FreeBSD aarch64 files.
* Makefile.in: Regenerate.
* configure.tgt: Add aarch64-*-freebsd* target triple.
* emulparams/aarch64fbsd.sh: New file.
* emulparams/aarch64fbsdb.sh: New file.
bfd * config.bfd: Add aarch64-*-freebsd* target triple.
Renlin Li [Thu, 2 Apr 2015 13:59:45 +0000 (14:59 +0100)]
[AArch64] Emit DATA_MAP in order within text section
2015-03-27 Renlin Li <renlin.li@arm.com>
gas/
* config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
(mapping_state_2): Don't emit MAP_DATA here.
(s_aarch64_inst): Align frag during state transition.
(md_assemble): Likewise.
Ed Maste [Thu, 2 Apr 2015 13:44:59 +0000 (14:44 +0100)]
Remove unused functions in tc-aarch64.c.
* config/tc-aarch64.c (set_error_kind): Delete.
(set_error_message): Delete.
Yao Qi [Thu, 2 Apr 2015 12:51:31 +0000 (13:51 +0100)]
kfail two tests in no-unwaited-for-left.exp for remote target
I see these two fails in no-unwaited-for-left.exp in remote testing
for aarch64-linux target.
...
continue
Continuing.
warning: Remote failure reply: E.No unwaited-for children left.
[Thread 1084] #2 stopped.
(gdb) FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when thread 2 exits
....
continue
Continuing.
warning: Remote failure reply: E.No unwaited-for children left.
[Thread 1081] #1 stopped.
(gdb) FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when the main thread exits
I checked the gdb.log on buildbot, and find that these two fails also
appear on Debian-i686-native-extended-gdbserver and Fedora-ppc64be-native-gdbserver-m64.
I recall that they are about local/remote parity, and related RSP is missing.
There has been already a PR 14618 about it. This patch is to kfail them
on remote target.
gdb/testsuite:
2015-04-02 Yao Qi <yao.qi@linaro.org>
* gdb.threads/no-unwaited-for-left.exp: Set up kfail if target
is remote.
H.J. Lu [Thu, 2 Apr 2015 12:41:50 +0000 (05:41 -0700)]
Regenerate configure in bfd/binutils/gas/gdb/gold
bfd/
* configure: Regenerated.
binutils/
* configure: Regenerated.
gas/
* configure: Regenerated.
gdb/
* Makefile.in (top_srcdir): New.
* configure: Regenerated.
gold/
* configure: Regenerated.
H.J. Lu [Thu, 2 Apr 2015 12:38:34 +0000 (05:38 -0700)]
Regenerate configure in sim
* arm/configure: Regenerated.
* avr/configure: Likewise.
* bfin/configure: Likewise.
* common/configure: Likewise.
* cr16/configure: Likewise.
* cris/configure: Likewise.
* d10v/configure: Likewise.
* erc32/configure: Likewise.
* frv/configure: Likewise.
* ft32/configure: Likewise.
* h8300/configure: Likewise.
* igen/configure: Likewise.
* iq2000/configure: Likewise.
* lm32/configure: Likewise.
* m32c/configure: Likewise.
* m32r/configure: Likewise.
* m68hc11/configure: Likewise.
* mcore/configure: Likewise.
* microblaze/configure: Likewise.
* mips/configure: Likewise.
* mn10300/configure: Likewise.
* moxie/configure: Likewise.
* msp430/configure: Likewise.
* ppc/configure: Likewise.
* rl78/configure: Likewise.
* rx/configure: Likewise.
* sh/configure: Likewise.
* sh64/configure: Likewise.
* v850/configure: Likewise.
H.J. Lu [Thu, 2 Apr 2015 12:37:09 +0000 (05:37 -0700)]
Set zlibdir/zlibinc with top_builddir/top_srcdir
* zlib.m4 (AM_ZLIB): Set zlibdir to -L\$(top_builddir)/../zlib
and set zlibinc to -I\$(top_srcdir)/../zlib.
Gary Benson [Thu, 2 Apr 2015 12:38:29 +0000 (13:38 +0100)]
Document "target:" sysroot changes
This commit documents the newly added "target:" sysroot feature.
gdb/ChangeLog:
* NEWS: Announce the new default sysroot of "target:".
gdb/doc/ChangeLog:
* gdb.texinfo (set sysroot): Document "target:".
Gary Benson [Thu, 2 Apr 2015 12:38:29 +0000 (13:38 +0100)]
Make the default sysroot be "target:"
This commit makes GDB default to a sysroot of "target:".
One testcase needed updating as a result of this change.
gdb/ChangeLog:
* main.c (captured_main): Set gdb_sysroot to "target:"
if not otherwise set.
gdb/testsuite/ChangeLog:
* gdb.base/break-probes.exp: Cope with "target:" sysroot.
Gary Benson [Thu, 2 Apr 2015 12:38:29 +0000 (13:38 +0100)]
Update exec_file_attach to cope with "target:" filenames
This commit adds support for filenames prefixed with "target:" to
exec_file_attach. This is required to correctly follow inferior
exec* calls when a gdb_sysroot prefixed with "target:" is set.
gdb/ChangeLog:
* exec.c (exec_file_attach): Support "target:" filenames.
Gary Benson [Thu, 2 Apr 2015 12:38:29 +0000 (13:38 +0100)]
Strip "target:" prefix in solib_find if accessing local files
This commit updates solib_find to strip the "target:" prefix from
gdb_sysroot when accessing local files. This ensures that the same
search algorithm is used for local files regardless of whether a
"target:" prefix was used or not. It also avoids cluttering GDB's
output with unnecessary "target:" prefixes on paths.
gdb/ChangeLog:
* solib.c (solib_find): Strip "target:" prefix from sysroot
if accessing local files.
Gary Benson [Thu, 2 Apr 2015 12:38:29 +0000 (13:38 +0100)]
Rearrange symfile_bfd_open
symfile_bfd_open handled what were remote files as a special case.
Converting from "remote:" files to "target:" made symfile_bfd_open
look like this:
if remote:
open bfd, check format, etc
return
local-specific stuff
open bfd, check format, etc
return
This commit rearranges symfile_bfd_open to remove the duplicated
code, like this:
if local:
local-specific stuff
open bfd, check format, etc
return
gdb/ChangeLog:
* symfile.c (symfile_bfd_open): Reorder to remove duplicated
checks and error messages.
Gary Benson [Thu, 2 Apr 2015 12:38:29 +0000 (13:38 +0100)]
Convert "remote:" sysroots to "target:" and remove "remote:"
The functionality of "target:" sysroots is a superset of the
functionality of "remote:" sysroots. This commit causes the
"set sysroot" command to rewrite "remote:" sysroots as "target:"
sysroots and replaces "remote:" specific code with "target:"
specific code where still necessary.
gdb/ChangeLog:
* remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
(remote_filename_p): Remove declaration.
(remote_bfd_open): Likewise.
* remote.c (remote_bfd_iovec_open): Remove function.
(remote_bfd_iovec_close): Likewise.
(remote_bfd_iovec_pread): Likewise.
(remote_bfd_iovec_stat): Likewise.
(remote_filename_p): Likewise.
(remote_bfd_open): Likewise.
* symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
* symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
(gdb_bfd_open_maybe_remote): Remove function.
(symfile_bfd_open): Replace remote filename check with
target filename check.
(reread_symbols): Use gdb_bfd_open.
* build-id.c (gdbcore.h): New include.
(build_id_to_debug_bfd): Use gdb_bfd_open.
* infcmd.c (attach_command_post_wait): Remove remote filename
check.
* solib.c (solib_find): Replace remote-specific handling with
target-specific handling. Update comments where necessary.
(solib_bfd_open): Replace remote-specific handling with
target-specific handling.
(gdb_sysroot_changed): New function.
(_initialize_solib): Call the above when gdb_sysroot changes.
* windows-tdep.c (gdbcore.h): New include.
(windows_xfer_shared_library): Use gdb_bfd_open.
Gary Benson [Thu, 2 Apr 2015 12:38:29 +0000 (13:38 +0100)]
Make gdb_bfd_open able to open BFDs using target fileio
This commit updates gdb_bfd_open to access files using target
fileio functions if the supplied path starts with "target:"
and if the local and target filesystems are not the same.
This allows users to specify "set sysroot target:" and have
GDB access files locally or from the remote as appropriate.
The new functions in gdb_bfd.c are copies of functions from
remote.c. This duplication is intentional and will be removed
by the next commit in this series.
gdb/ChangeLog:
* gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
(is_target_filename): New declaration.
(gdb_bfd_has_target_filename): Likewise.
(gdb_bfd_open): Update documentation comment.
* gdb_bfd.c (target.h): New include.
(gdb/fileio.h): Likewise.
(is_target_filename): New function.
(gdb_bfd_has_target_filename): Likewise.
(fileio_errno_to_host): Likewise.
(gdb_bfd_iovec_fileio_open): Likewise.
(gdb_bfd_iovec_fileio_pread): Likewise.
(gdb_bfd_iovec_fileio_close): Likewise.
(gdb_bfd_iovec_fileio_fstat): Likewise.
(gdb_bfd_open): Use target fileio to access paths prefixed
with "target:" where necessary.
Gary Benson [Thu, 2 Apr 2015 12:38:28 +0000 (13:38 +0100)]
Introduce target_filesystem_is_local
This commit introduces a new target method target_filesystem_is_local
which can be used to determine whether or not the filesystem accessed
by the target_fileio_* methods is the local filesystem.
gdb/ChangeLog:
* target.h (struct target_ops) <to_filesystem_is_local>:
New field.
(target_filesystem_is_local): New macro.
* target-delegates.c: Regenerate.
* remote.c (remote_filesystem_is_local): New function.
(init_remote_ops): Initialize to_filesystem_is_local.
Gary Benson [Thu, 2 Apr 2015 12:38:28 +0000 (13:38 +0100)]
Introduce target_fileio_fstat
This commit introduces a new target method target_fileio_fstat
which can be used to retrieve information about files opened with
target_fileio_open.
gdb/ChangeLog:
* target.h (struct target_ops) <to_fileio_fstat>: New field.
(target_fileio_fstat): New declaration.
* target.c (target_fileio_fstat): New function.
* inf-child.c (inf_child_fileio_fstat): Likewise.
(inf_child_target): Initialize to_fileio_fstat.
* remote.c (init_remote_ops): Likewise.
Mike Frysinger [Thu, 2 Apr 2015 04:48:04 +0000 (00:48 -0400)]
binutils: update my e-mail address
Mike Frysinger [Wed, 1 Apr 2015 06:34:00 +0000 (02:34 -0400)]
sim: clean up SIM_EXTRA_OBJS references
This variable was deleted in previous commits and is not used anymore.
Prune any stray references to it.
GDB Administrator [Thu, 2 Apr 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Evandro Menezes [Thu, 26 Mar 2015 20:18:08 +0000 (15:18 -0500)]
[AArch64] Add support for the Samsung Exynos M1 processor
2015-03-26 Evandro Menezes <e.menezes@samsung.com>
gas/
* config/tc-aarch64.c: Add support for Samsung Exynos M1.
* doc/c-aarch64.texi (-mcpu=): Add "exynos-m1".
Evandro Menezes [Thu, 26 Mar 2015 20:51:14 +0000 (15:51 -0500)]
[ARM] Add support for the Samsung Exynos M1 processor
2015-03-26 Evandro Menezes <e.menezes@samsung.com>
gas/
* config/tc-arm.c: Add support for Samsung Exynos M1.
* doc/c-arm.texi (-mcpu=): Add "exynos-m1".
Sasha Smundak [Wed, 1 Apr 2015 18:49:12 +0000 (11:49 -0700)]
Add support for writing unwinders in Python.
gdb/ChangeLog:
* Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
(SUBDIR_PYTHON_SRCS): Add py-unwind.c.
(py-unwind.o): New recipe.
* NEWS: mention Python frame unwinding.
* data-directory/Makefile.in (PYTHON_FILE_LIST): Add
gdb/unwinder.py and gdb/command/unwinder.py
* python/lib/gdb/__init__.py (packages): Add frame_unwinders
list.
(execute_unwinders): New function.
* python/lib/gdb/command/unwinders.py: New file.
* python/lib/gdb/unwinder.py: New file.
* python/py-objfile.c (objfile_object): Add frame_unwinders field.
(objfpy_dealloc): Decrement frame_unwinders reference count.
(objfpy_initialize): Create frame_unwinders list.
(objfpy_get_frame_unwinders): New function.
(objfpy_set_frame_unwinders): Ditto.
(objfile_getset): Add frame_unwinders attribute to Objfile.
* python/py-progspace.c (pspace_object): Add frame_unwinders field.
(pspy_dealloc): Decrement frame_unwinders reference count.
(pspy_initialize): Create frame_unwinders list.
(pspy_get_frame_unwinders): New function.
(pspy_set_frame_unwinders): Ditto.
(pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
* python/py-unwind.c: New file.
* python/python-internal.h (pspy_get_name_unwinders): New prototype.
(objpy_get_frame_unwinders): New prototype.
(gdbpy_initialize_unwind): New prototype.
* python/python.c (gdbpy_apply_type_printers): Call
gdbpy_initialize_unwind.
gdb/doc/ChangeLog:
* doc/python.texi (Writing a Frame Unwinder in Python): Add
section.
gdb/testsuite/ChangeLog:
* gdb.python/py-unwind-maint.c: New file.
* gdb.python/py-unwind-maint.exp: New test.
* gdb.python/py-unwind-maint.py: New file.
* gdb.python/py-unwind.c: New file.
* gdb.python/py-unwind.exp: New test.
* gdb.python/py-unwind.py: New test.
H.J. Lu [Wed, 1 Apr 2015 17:27:34 +0000 (10:27 -0700)]
Fix sim build
* common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
(BFD_LIB): Remove $(ZLIB).
(CONFIG_LIBS): Add $(ZLIB).
* ppc/Makefile.in (ZLIBINC): Removed.
(INCLUDES): Remove $(ZLIBINC).
(BFD_LIB): Remove $(ZLIB).
H.J. Lu [Wed, 1 Apr 2015 17:15:13 +0000 (10:15 -0700)]
Regenerate configure in sim
* arm/configure: Regenerated.
* avr/configure: Likewise.
* bfin/configure: Likewise.
* common/configure: Likewise.
* cr16/configure: Likewise.
* cris/configure: Likewise.
* d10v/configure: Likewise.
* erc32/configure: Likewise.
* frv/configure: Likewise.
* ft32/configure: Likewise.
* h8300/configure: Likewise.
* igen/configure: Likewise.
* iq2000/configure: Likewise.
* lm32/configure: Likewise.
* m32c/configure: Likewise.
* m32r/configure: Likewise.
* m68hc11/configure: Likewise.
* mcore/configure: Likewise.
* microblaze/configure: Likewise.
* mips/configure: Likewise.
* mn10300/configure: Likewise.
* moxie/configure: Likewise.
* msp430/configure: Likewise.
* ppc/configure: Likewise.
* rl78/configure: Likewise.
* rx/configure: Likewise.
* sh/configure: Likewise.
* sh64/configure: Likewise.
* v850/configure: Likewise.
H.J. Lu [Wed, 1 Apr 2015 15:14:32 +0000 (08:14 -0700)]
Work around a GCC uninitialized warning bug
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation): Work
around a GCC uninitialized warning bug fixed in GCC 4.6.
Pedro Alves [Mon, 30 Mar 2015 15:39:56 +0000 (16:39 +0100)]
infrun.c:resume: currently_stepping after clearing stepped_breakpoint
My all-stop-on-top-of-non-stop series manages to shows regressions due
to this latent bug. currently_stepping returns true if
stepped_breakpoint is set. Obviously we should clear
it before checking currently_stepping, not after.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (resume): Check currently_stepping after clearing
stepped_breakpoint, not before.
Pedro Alves [Tue, 31 Mar 2015 17:36:51 +0000 (18:36 +0100)]
gdb.threads/manythreads.exp: can't read "test": no such variable
If interrupt_and_wait manages to trigger the FAIL path, we get:
ERROR OCCURED: can't read "test": no such variable
gdb/testsuite/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* gdb.threads/manythreads.exp (interrupt_and_wait): Pass $message
to fail instead of non-existent $test.
Pedro Alves [Mon, 30 Mar 2015 17:00:28 +0000 (18:00 +0100)]
Fix gdb_spawn_with_cmdline_opts with non-empty GDBFLAGS
Running attach.exp with a DejaGnu board that sets GDBFLAGS, like
e.g.,:
set GDBFLAGS "-ex \"set displaced off\""
fails with (line breaks added for clarity):
(gdb) PASS: gdb.base/attach.exp: starting with --pid
Executing on build: kill -9 3537 (timeout = 300)
spawn -ignore SIGHUP kill -9 3537
spawn of build/gdb/gdb -nw -nx \
-data-directory build/gdb/testsuite/../data-directory \
-ex "set displaced off"-iex "set height 0" -iex "set width 0" \
^^^^^^^^
--pid=4468 -ex "start" failed
ERROR: Spawning build/gdb/gdb failed.
UNRESOLVED: gdb.base/attach.exp: cmdline attach run: run to prompt
gdb/testsuite/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_spawn_with_cmdline_opts): Append space to
GDBFLAGS if not empty.
Pedro Alves [Mon, 30 Mar 2015 16:02:01 +0000 (17:02 +0100)]
Make print_target_wait_results print the whole ptid
Makes "set debug infrun 1" a bit clearer. Before:
infrun: target_wait (-1, status) =
infrun: 6299 [Thread 0x7ffff7fc1700 (LWP 6340)],
after:
infrun: target_wait (-1.0.0, status) =
infrun: 7233.7237.0 [Thread 0x7ffff7fc1700 (LWP 7237)],
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (print_target_wait_results): Print all the ptid
elements.
Pedro Alves [Thu, 26 Mar 2015 19:05:40 +0000 (19:05 +0000)]
keep_going: Add missing discard_cleanups call
By inspection, I noticed a path where we return without discarding the
cleanups.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (keep_going): Also discard cleanups if inserting
breakpoints fails.
Pedro Alves [Wed, 1 Apr 2015 13:58:56 +0000 (14:58 +0100)]
wait_for_inferior and errors thrown from target_wait
Noticed that if an error is thrown out of target_wait, we miss running
finish_thread_state_cleanup.
Tested on x86_64 Fedora 20, with "maint set target-async off".
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (wait_for_inferior): Install the
finish_thread_state_cleanup cleanup across the whole function, not
just around handle_inferior_event.
Ilya Tocar [Wed, 1 Apr 2015 13:48:38 +0000 (16:48 +0300)]
Convert mov foo@GOT(%reg), %reg to lea foo@GOTOFF(%reg), %reg
2015-04-01 Ilya Tocar <ilya.tocar@intel.com>
PR gold/17640
* i386.cc (Target_i386::can_convert_mov_to_lea): New.
(Target_i386::Scan::local): Don't create GOT entry, when we
can convert GOT to GOTOFF.
(Target_i386::Scan::global): Ditto.
(Target_i386::Relocate::relocate): Convert mov foo@GOT(%reg), %reg to
lea foo@GOTOFF(%reg), %reg if possible.
* testsuite/Makefile.am (i386_mov_to_lea): New test.
* testsuite/i386_mov_to_lea1.s: New.
* testsuite/i386_mov_to_lea2.s: Ditto.
* testsuite/i386_mov_to_lea3.s: Ditto.
* testsuite/i386_mov_to_lea4.s: Ditto.
* testsuite/i386_mov_to_lea5.s: Ditto.
* testsuite/i386_mov_to_lea.sh: Ditto.
H.J. Lu [Wed, 1 Apr 2015 13:24:42 +0000 (06:24 -0700)]
Regenerate configure in gold
Regenerate configure for zlib.m4 change, which adds --with-system-zlib and
removes --with-zlib in gold. zlib is enabled unconditionally with builtin
zlib imported from GCC.
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Add $(ZLIBINC).
(AM_CXXFLAGS): Likewise.
(ldadd_varldadd_var): Add $(ZLIB).
(incremental_dump_LDADD): Likewise.
(dwp_LDADD): Likewise.
* compressed_output.cc: Don't check HAVE_ZLIB_H to include
<zlib.h>.
(zlib_compress): Don't check HAVE_ZLIB_H.
(zlib_decompress): Likewise.
* options.h (compress_debug_sections): Likewise.
* configure.ac (AM_CONDITIONAL): Removed.
* testsuite/Makefile.am (ZLIB): New.
(LDADD): Add $(ZLIB).
Don't check HAVE_ZLIB.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
Pedro Alves [Wed, 1 Apr 2015 14:24:54 +0000 (14:24 +0000)]
Use do_target_resume when stepping past permanent breakpoint too
We can use the recently added do_target_resume do simplify the code a
bit here.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (resume) <step past permanent breakpoint>: Use
do_target_resume.
Pedro Alves [Tue, 24 Mar 2015 14:24:53 +0000 (14:24 +0000)]
linux_nat.c: Mark new thread running even if momentarily pausing
My all-stop-on-top-of-non-stop series manages to trip on a bug in the
linux-nat.c backend while running the testsuite. If a thread is
discovered while threads are being momentarily paused (without the
core's intervention), the thread ends up stuck in THREAD_STOPPED
state, even though from the user's perspective, the thread is running
even while it is paused.
From inspection, in the current sources, this can happen if we call
stop_and_resume_callback, though there's no way to test that with
current Linux kernels.
(While trying to come up with test to exercise this, I stumbled on:
https://sourceware.org/ml/gdb-patches/2015-03/msg00850.html
... which does include a non-trivial test, so I think I can still
claim I come out net positive. :-) )
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_handle_extended_wait): Always call set_running.
Pierre-Marie de Rodat [Tue, 10 Mar 2015 08:51:27 +0000 (09:51 +0100)]
Share the "multi_line" helper among all testcases
gdb/testsuite/ChangeLog:
* gdb.ada/complete.exp: Remove "multi_line".
* gdb.ada/info_exc.exp: Remove "multi_line".
* gdb.ada/packed_tagged.exp: Remove "multi_line".
* gdb.ada/ptype_field.exp: Remove "multi_line".
* gdb.ada/sym_print_name.exp: Remove "multi_line".
* gdb.ada/tagged.exp: Remove "multi_line".
* gdb.btrace/buffer-size.exp: Replace [join [list ...]] with
[multi_line ...]
* gdb.btrace/delta.exp: Likewise.
* gdb.btrace/exception.exp: Likewise.
* gdb.btrace/function_call_history.exp: Likewise.
* gdb.btrace/instruction_history.exp: Likewise.
* gdb.btrace/nohist.exp: Likewise.
* gdb.btrace/record_goto.exp: Likewise.
* gdb.btrace/segv.exp: Likewise.
* gdb.btrace/stepi.exp: Likewise.
* gdb.btrace/tailcall.exp: Likewise.
* gdb.btrace/unknown_functions.exp: Likewise.
* gdb.dwarf2/dw2-undefined-ret-addr.exp: Likewise.
* lib/gdb.exp: Add the "multi_line" helper.
Pierre-Marie de Rodat [Wed, 1 Apr 2015 12:53:42 +0000 (14:53 +0200)]
Add myself as a write-after-approval GDB maintainer
gdb/ChangeLog:
* MAINTAINERS (Write After Approval): Add "Pierre-Marie de
Rodat".
Pedro Alves [Wed, 1 Apr 2015 12:38:06 +0000 (13:38 +0100)]
Crash on thread id wrap around
On GNU/Linux, if the target reuses the TID of a thread that GDB still
has in its list marked as THREAD_EXITED, GDB crashes, like:
(gdb) continue
Continuing.
src/gdb/thread.c:789: internal-error: set_running: Assertion `tp->state != THREAD_EXITED' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/tid-reuse.exp: continue to breakpoint: after_reuse_time (GDB internal error)
Here:
(top-gdb) bt
#0 internal_error (file=0x953dd8 "src/gdb/thread.c", line=789, fmt=0x953da0 "%s: Assertion `%s' failed.")
at src/gdb/common/errors.c:54
#1 0x0000000000638514 in set_running (ptid=..., running=1) at src/gdb/thread.c:789
#2 0x00000000004bda42 in linux_handle_extended_wait (lp=0x16f5760, status=0, stopping=0) at src/gdb/linux-nat.c:2114
#3 0x00000000004bfa24 in linux_nat_filter_event (lwpid=20570, status=198015) at src/gdb/linux-nat.c:3127
#4 0x00000000004c070e in linux_nat_wait_1 (ops=0xe193d0, ptid=..., ourstatus=0x7fffffffd2c0, target_options=1) at src/gdb/linux-nat.c:3478
#5 0x00000000004c1015 in linux_nat_wait (ops=0xe193d0, ptid=..., ourstatus=0x7fffffffd2c0, target_options=1) at src/gdb/linux-nat.c:3722
#6 0x00000000004c92d2 in thread_db_wait (ops=0xd80b60 <thread_db_ops>, ptid=..., ourstatus=0x7fffffffd2c0, options=1)
at src/gdb/linux-thread-db.c:1525
#7 0x000000000066db43 in delegate_wait (self=0xd80b60 <thread_db_ops>, arg1=..., arg2=0x7fffffffd2c0, arg3=1) at src/gdb/target-delegates.c:116
#8 0x000000000067e54b in target_wait (ptid=..., status=0x7fffffffd2c0, options=1) at src/gdb/target.c:2206
#9 0x0000000000625111 in fetch_inferior_event (client_data=0x0) at src/gdb/infrun.c:3275
#10 0x0000000000648a3b in inferior_event_handler (event_type=INF_REG_EVENT, client_data=0x0) at src/gdb/inf-loop.c:56
#11 0x00000000004c2ecb in handle_target_event (error=0, client_data=0x0) at src/gdb/linux-nat.c:4655
I managed to come up with a test that reliably reproduces this. It
spawns enough threads for the pid number space to wrap around, so
could potentially take a while. On my box that's 4 seconds; on
gcc110, a PPC box which has max_pid set to 65536, it's over 10
seconds. So I made the test compute how long that would take, and cap
the time waited if it would be unreasonably long.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* linux-thread-db.c (record_thread): Readd the thread to gdb's
list if it was marked exited.
gdb/testsuite/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* gdb.threads/tid-reuse.c: New file.
* gdb.threads/tid-reuse.exp: New file.
Marcus Shawcroft [Tue, 24 Feb 2015 12:04:41 +0000 (12:04 +0000)]
[AArch64] Workaround for Cortex A53 erratum 843419
Some early revisions of the Cortex-A53 have an erratum (843419). The
details of the erratum are quite complex and involve dynamic
conditions. For the purposes of the workaround we have simplified the
static conditions to an ADRP in the last two instructions of a 4KByte
page, followed within four instructions by a load/store dependent on
the ADRP.
This patch adds support to conservatively scan for and workaround
Cortex A53 erratum 843419. There are two different workaround
strategies used. The first is to rewrite ADRP instructions which form
part of an erratum sequence with an ADR instruction. In situations
where the ADR provides insufficient offset the dependent load or store
instruction from the sequence is moved to a stub section and branches
are inserted from the original sequence to the relocated instruction
and back again.
Stub section sizes are rounded up to a multiple of 4096 in order to
ensure that the act of inserting work around stubs does not create
more errata sequences.
Workaround stubs are always inserted into the stub section associated
with the input section containing the erratum sequence. This ensures
that the fully relocated form of the veneered load store instruction
is available at the point in time when the stub section is written.
H.J. Lu [Wed, 1 Apr 2015 11:57:28 +0000 (04:57 -0700)]
Add --with-system-zlib to top level configure
The top level configure supports --with-system-zlib. This patch makes
configure --help to display --with-system-zlib.
* configure.ac: Add --with-system-zlib.
* configure: Regenerated.
H.J. Lu [Wed, 1 Apr 2015 11:55:48 +0000 (04:55 -0700)]
Regenerate configure in bfd/binutils/gas/gdb
bfd/
2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
binutils/
2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
gas/
2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
gdb/
2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
H.J. Lu [Wed, 1 Apr 2015 11:51:55 +0000 (04:51 -0700)]
Unset zlibdir/zlibinc only for --with-system-zlib
* zlib.m4 (AM_ZLIB): Unset zlibdir and zlibinc only for
--with-system-zlib.
H.J. Lu [Wed, 1 Apr 2015 11:24:05 +0000 (04:24 -0700)]
Add a testcase for PR ld/18176
PR ld/18176
* ld-x86-64/pr18176.d: New file.
* ld-x86-64/pr18176.s: Likewise.
* ld-x86-64/pr18176.t: Likewise.
* ld-x86-64/x86-64.exp: Run pr18176.
Chen Gang [Wed, 1 Apr 2015 10:29:46 +0000 (11:29 +0100)]
Prevent multiple definitions for _HEAP_START, _HEAP_MAX, and _STACK_START when performing a relocatable link with a tic6x target.
* emulparams/elf32_tic6x_le.sh: Skip OTHER_BSS_SECTIONS for
relocating operation.
Pedro Alves [Wed, 1 Apr 2015 10:01:44 +0000 (11:01 +0100)]
GDBServer: give more complete usage information
--attach/--multi are currently only mentioned on the usage info first
lines, the meaning of PROG is completely absent and the COMM text does
not mention '-/stdio'.
A few options are missing:
. --disable-randomization / --no-disable-randomization is not mentioned.
Although the manual has a comment saying these are superceded by
QDisableRandomization, that only makes sense for "run" in
extended-remote mode. When we start gdbserver passing it a PROG,
--disable-randomization / --no-disable-randomization do take effect.
So I think we should document these.
. We show --debug / --remote-debug, so might as well show --disable-packet too.
GDB's --help has this "For more information, consult the GDB manual"
blurb that is missing in GDBserver's --help.
Then shuffle things around a bit into "Operating modes", "Other
options" and "Debug options" sections, similarly to GDB's --help
structure.
Before:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ ./gdbserver/gdbserver --help
Usage: gdbserver [OPTIONS] COMM PROG [ARGS ...]
gdbserver [OPTIONS] --attach COMM PID
gdbserver [OPTIONS] --multi COMM
COMM may either be a tty device (for serial debugging), or
HOST:PORT to listen for a TCP connection.
Options:
--debug Enable general debugging output.
--debug-format=opt1[,opt2,...]
Specify extra content in debugging output.
Options:
all
none
timestamp
--remote-debug Enable remote protocol debugging output.
--version Display version information and exit.
--wrapper WRAPPER -- Run WRAPPER to start new programs.
--once Exit after the first connection has closed.
Report bugs to "<http://www.gnu.org/software/gdb/bugs/>".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ ./gdbserver/gdbserver --help
Usage: gdbserver [OPTIONS] COMM PROG [ARGS ...]
gdbserver [OPTIONS] --attach COMM PID
gdbserver [OPTIONS] --multi COMM
COMM may either be a tty device (for serial debugging),
HOST:PORT to listen for a TCP connection, or '-' or 'stdio' to use
stdin/stdout of gdbserver.
PROG is the executable program. ARGS are arguments passed to inferior.
PID is the process ID to attach to, when --attach is specified.
Operating modes:
--attach Attach to running process PID.
--multi Start server without a specific program, and
only quit when explicitly commanded.
--once Exit after the first connection has closed.
--help Print this message and then exit.
--version Display version information and exit.
Other options:
--wrapper WRAPPER -- Run WRAPPER to start new programs.
--disable-randomization
Run PROG with address space randomization disabled.
--no-disable-randomization
Don't disable address space randomization when
starting PROG.
Debug options:
--debug Enable general debugging output.
--debug-format=opt1[,opt2,...]
Specify extra content in debugging output.
Options:
all
none
timestamp
--remote-debug Enable remote protocol debugging output.
--disable-packet=opt1[,opt2,...]
Disable support for RSP packets or features.
Options:
vCont, Tthread, qC, qfThreadInfo and
threads (disable all threading packets).
For more information, consult the GDB manual (available as on-line
info or a printed manual).
Report bugs to "<http://www.gnu.org/software/gdb/bugs/>".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gdb/gdbserver/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
Cleber Rosa <crosa@redhat.com>
* server.c (gdbserver_usage): Reorganize and extend the usage
message.
Alan Modra [Wed, 1 Apr 2015 08:49:27 +0000 (19:19 +1030)]
Start of relro segment adjustment
Adjusting the start of the relro segment in order to make it end
exactly on a page boundary runs into difficulties when sections in the
relro segment are aligned; Adjusting the start by (next_page - end)
sometimes results in more than that adjustment occurring at the end,
overrunning the page boundary. So when that occurs we try a new lower
start position by masking the adjusted start with the maximum section
alignment. However, we didn't consider that this masked start address
may in fact be before the initial relro base, which is silly since
that can only increase padding at the relro end.
I've also moved some calculations closer to where they are used, and
comments closer to the relevant statements.
* ldlang.c (lang_size_sections): When alignment of sections
results in relro base adjustment being too large, don't go lower
than the initial value.
* ldexp.c (fold_binary <DATA_SEGMENT_RELRO_END>): Comment.
* scripttempl/elf.sc (DATA_SEGMENT_ALIGN): Omit SEGMENT_SIZE
alignment when SEGMENT_SIZE is the same as MAXPAGESIZE.
Mike Frysinger [Wed, 1 Apr 2015 06:21:21 +0000 (02:21 -0400)]
sim: m32c: enable warnings & clean up a bunch
This doesn't clean up all the warnings, just most of them.
The ones that are left will require some care to unravel.
Mike Frysinger [Tue, 31 Mar 2015 05:13:12 +0000 (01:13 -0400)]
sim: run: punt!
Now that all targets have been converted to nrun, we can finally punt
this old inconsistent interface.
A few stray references to the old run were sprinkled about; clean them
up in the process.
We leave behind the run(1) man page mostly so that we get it updated for
the new nrun interface.
Mike Frysinger [Wed, 1 Apr 2015 03:32:49 +0000 (23:32 -0400)]
sim: update zlib handling
With zlib being mandatory, and the updated m4 configs, we need to regen
and use the new settings w/bfd to avoid linkage errors.
Alan Modra [Wed, 1 Apr 2015 02:31:38 +0000 (13:01 +1030)]
Yet another warning fix
Older compilers that warn wrongly will just need -Wno-error. No way
am I going to init every single field, then have to edit this code
whenever bfd_link_hash_entry changes. Another option, making the
struct static, isn't very nice since it means larger binaries and
worse code.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation): Don't
init ehdr_start_save.
Alan Modra [Wed, 1 Apr 2015 00:13:20 +0000 (10:43 +1030)]
Fix ld eelf32ppcvxworks.c dependencies
* Makefile.am (eelf32ppcvxworks.c): Depend on ppc32elf.em and
ldemul-list.h.
(eelf32lppc.c, eelf32lppclinux.c, eelf32lppcnto.c, eelf32lppcsim.c,
eelf32ppc.c, eelf32ppc_fbsd.c, eelf32ppclinux.c, eelf32ppcnto.c,
eelf32ppcsim.c): Rearrange deps for consistency.
* Makefile.in: Regenerate.
Ed Schouten [Tue, 31 Mar 2015 14:47:10 +0000 (16:47 +0200)]
Fixes for a small number of compiler warnings
The ehdr_start_save variable does not need to be initialized. However,
not initializing it will trigger a compiler warning when using older
versions of GCC. Self-assignment unfortunately doesn't work for Clang
as Clang has a warning similar to -Winit-self as part of -Wall.
* emultempl/elf32.em (gld*_before_allocation): Zero-initialize
the ehdr_start_save variable.
GDB Administrator [Wed, 1 Apr 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Sergio Durigan Junior [Tue, 31 Mar 2015 23:32:34 +0000 (19:32 -0400)]
Implement support for checking /proc/PID/coredump_filter
This patch, as the subject says, extends GDB so that it is able to use
the contents of the file /proc/PID/coredump_filter when generating a
corefile. This file contains a bit mask that is a representation of
the different types of memory mappings in the Linux kernel; the user
can choose to dump or not dump a certain type of memory mapping by
enabling/disabling the respective bit in the bit mask. Currently,
here is what is supported:
bit 0 Dump anonymous private mappings.
bit 1 Dump anonymous shared mappings.
bit 2 Dump file-backed private mappings.
bit 3 Dump file-backed shared mappings.
bit 4 (since Linux 2.6.24)
Dump ELF headers.
bit 5 (since Linux 2.6.28)
Dump private huge pages.
bit 6 (since Linux 2.6.28)
Dump shared huge pages.
(This table has been taken from core(5), but you can also read about it
on Documentation/filesystems/proc.txt inside the Linux kernel source
tree).
The default value for this file, used by the Linux kernel, is 0x33,
which means that bits 0, 1, 4 and 5 are enabled. This is also the
default for GDB implemented in this patch, FWIW.
Well, reading the file is obviously trivial. The hard part, mind you,
is how to determine the types of the memory mappings. For that, I
extended the code of gdb/linux-tdep.c:linux_find_memory_regions_full and
made it rely *much more* on the information gathered from
/proc/<PID>/smaps. This file contains a "verbose dump" of the
inferior's memory mappings, and we were not using as much information as
we could from it. If you want to read more about this file, take a look
at the proc(5) manpage (I will also write a blog post soon about
everything I had to learn to get this patch done, and when I it is ready
I will post it here).
With Oleg Nesterov's help, we could improve the current algorithm for
determining whether a memory mapping is anonymous/file-backed,
private/shared. GDB now also respects the MADV_DONTDUMP flag and does
not dump the memory mapping marked as so, and will always dump
"[vsyscall]" or "[vdso]" mappings (just like the Linux kernel).
In a nutshell, what the new code is doing is:
- If the mapping is associated to a file whose name ends with
" (deleted)", or if the file is "/dev/zero", or if it is "/SYSV%08x"
(shared memory), or if there is no file associated with it, or if
the AnonHugePages: or the Anonymous: fields in the /proc/PID/smaps
have contents, then GDB considers this mapping to be anonymous.
There is a special case in this, though: if the memory mapping is a
file-backed one, but *also* contains "Anonymous:" or
"AnonHugePages:" pages, then GDB considers this mapping to be *both*
anonymous and file-backed, just like the Linux kernel does. What
that means is simple: this mapping will be dumped if the user
requested anonymous mappings *or* if the user requested file-backed
mappings to be present in the corefile.
It is worth mentioning that, from all those checks described above,
the most fragile is the one to see if the file name ends with
" (deleted)". This does not necessarily mean that the mapping is
anonymous, because the deleted file associated with the mapping may
have been a hard link to another file, for example. The Linux
kernel checks to see if "i_nlink == 0", but GDB cannot easily do
this check (as it has been discussed, GDB would need to run as root,
and would need to check the contents of the /proc/PID/map_files/
directory in order to determine whether the deleted was a hardlink
or not). Therefore, we made a compromise here, and we assume that
if the file name ends with " (deleted)", then the mapping is indeed
anonymous. FWIW, this is something the Linux kernel could do
better: expose this information in a more direct way.
- If we see the flag "sh" in the VmFlags: field (in /proc/PID/smaps),
then certainly the memory mapping is shared (VM_SHARED). If we have
access to the VmFlags, and we don't see the "sh" there, then
certainly the mapping is private. However, older Linux kernels (see
the code for more details) do not have the VmFlags field; in that
case, we use another heuristic: if we see 'p' in the permission
flags, then we assume that the mapping is private, even though the
presence of the 's' flag there would mean VM_MAYSHARE, which means
the mapping could still be private. This should work OK enough,
however.
Finally, it is worth mentioning that I added a new command, 'set
use-coredump-filter on/off'. When it is 'on', it will read the
coredump_filter' file (if it exists) and use its value; otherwise, it
will use the default value mentioned above (0x33) to decide which memory
mappings to dump.
gdb/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Oleg Nesterov <oleg@redhat.com>
PR corefiles/16092
* linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
New enum identifying the various options of the coredump_filter
file.
(struct smaps_vmflags): New struct.
(use_coredump_filter): New variable.
(decode_vmflags): New function.
(mapping_is_anonymous_p): Likewise.
(dump_mapping_p): Likewise.
(linux_find_memory_regions_full): New variables
'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
parsing of its information. Implement memory mapping filtering
based on its contents.
(show_use_coredump_filter): New function.
(_initialize_linux_tdep): New command 'set use-coredump-filter'.
* NEWS: Mention the possibility of using the
'/proc/PID/coredump_filter' file when generating a corefile.
Mention new command 'set use-coredump-filter'.
gdb/doc/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/16092
* gdb.texinfo (gcore): Mention new command 'set
use-coredump-filter'.
(set use-coredump-filter): Document new command.
gdb/testsuite/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/16092
* gdb.base/coredump-filter.c: New file.
* gdb.base/coredump-filter.exp: Likewise.
Sergio Durigan Junior [Tue, 31 Mar 2015 23:17:23 +0000 (19:17 -0400)]
Catch exception on solib_svr4_r_ldsomap
When loading a corefile that has some inaccessible memory region(s),
GDB complains about it:
(gdb) core /my/corefile
[New LWP 28468]
Cannot access memory at address 0x355fc21148
Cannot access memory at address 0x355fc21140
(gdb)
However, despite not seeing the message "Core was generated by...", it
is still possible to inspect the corefile using regular GDB commands.
The reason for that is because read_memory_unsigned_integer throws an
exception when it cannot read the memory region, but
solib_svr4_r_ldsomap was not catching it. The fix is to catch the
exception and act accordingly.
Tested on Fedora 20 x86_64, no regressions found.
gdb/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
* solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
read_memory_unsigned_integer.
H.J. Lu [Tue, 31 Mar 2015 20:15:43 +0000 (13:15 -0700)]
Add missing ChangeLog entry
H.J. Lu [Tue, 31 Mar 2015 20:15:01 +0000 (13:15 -0700)]
Add missing ChangeLog entry
H.J. Lu [Tue, 31 Mar 2015 18:36:17 +0000 (11:36 -0700)]
Remove --with-target-subdir=. --disable-multilib
zlib/configure is updated to properly handle in-tree build for host.
* src-release.sh: Don't configure with --with-target-subdir=.
--disable-multilib.
H.J. Lu [Tue, 31 Mar 2015 18:35:30 +0000 (11:35 -0700)]
Use AM_ENABLE_MULTILIB only if with_target_subdir isn't empty
* configure.ac (AM_ENABLE_MULTILIB): Use only if
${with_target_subdir} isn't empty.
* configure: Regenerated.
H.J. Lu [Tue, 31 Mar 2015 18:44:00 +0000 (11:44 -0700)]
Replace src-release with src-release.sh
* src-release.sh (DEVO_SUPPORT): Replace src-release with
src-release.sh.
H.J. Lu [Tue, 31 Mar 2015 15:24:02 +0000 (08:24 -0700)]
Add --with-system-zlib in gdb
This patch adds --with-system-zlib and removes --with-zlib in gdb.
* Makefile.in (ZLIB): New.
(ZLIBINC): Likewise.
(INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
(CLIBS): Add $(ZLIB).
* acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
Add -lz to LIBS.
* gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
* top.c (print_gdb_configuration): Remove --with-zlib and
--without-zlib.
* config.in: Regenerated.
* configure: Likewise.
H.J. Lu [Tue, 31 Mar 2015 15:20:55 +0000 (08:20 -0700)]
Remove the last change on dw2-compress-1.d
The compressed .debug_info section is bigger than the original in 32-bit.
Ed Schouten [Tue, 31 Mar 2015 09:33:45 +0000 (11:33 +0200)]
Add support for Nuxi CloudABI on x86-64
bfd/
* config.bfd (targ_defvec): Set to x86_64_elf64_cloudabi_vec
for x86_64-*-cloudabi*.
* configure.ac: Handle x86_64_elf64_cloudabi_vec.
* configure: Regenerated.
* elf64-x86-64.c (TARGET_LITTLE_SYM): Support x86_64-*-cloudabi*.
(TARGET_LITTLE_NAME): Likewise.
(ELF_OSABI): Likewise.
(elf64_bed): Likewise.
* targets.c (x86_64_elf64_cloudabi_vec): New.
(_bfd_target_vector): Add x86_64_elf64_cloudabi_vec.
gas/
* configure.tgt (fmt): Set to elf for *-*-cloudabi*.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Add
eelf_x86_64_cloudabi.c.
(eelf_x86_64_cloudabi.c): New.
* configure.tgt (targ_emul): Set to elf_x86_64_cloudabi for
x86_64-*-cloudabi*.
* Makefile.in: Regenerated.
* emulparams/elf_x86_64_cloudabi.sh: New file.
Petr Machata [Mon, 23 Feb 2015 14:41:52 +0000 (15:41 +0100)]
dwarf.exp: Allow generating a stub .debug_line section
Example of use:
Dwarf::assemble "foo.s" {
build_id
0102030405060708
declare_labels L;
cu {is_64 0 version 4 addr_size 8} {
DW_TAG_compile_unit {
{DW_AT_stmt_list $L DW_FORM_sec_offset}
} {
DW_TAG_subprogram {
# We can now reference the source file.
{DW_AT_decl_file 1 DW_FORM_data1}
}
}
}
lines {is_64 0 version 2 addr_size 8} L {
include_dir "foo"
include_dir "bar"
file_name "foo.c" 1
file_name "bar.c" 1
file_name "baz.c" 2
}
}
Signed-off-by: Petr Machata <pmachata@redhat.com>
H.J. Lu [Tue, 31 Mar 2015 12:55:18 +0000 (05:55 -0700)]
Revert the AM_ZLIB change in gas
* configure.ac: Revert the AM_ZLIB change.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
H.J. Lu [Tue, 31 Mar 2015 12:55:46 +0000 (05:55 -0700)]
Revert the AM_ZLIB change in binutils
* configure.ac: Revert the AM_ZLIB change.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
H.J. Lu [Tue, 31 Mar 2015 12:54:55 +0000 (05:54 -0700)]
Revert the AM_ZLIB change in bfd
* configure.ac: Revert the AM_ZLIB change.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
H.J. Lu [Tue, 31 Mar 2015 12:53:39 +0000 (05:53 -0700)]
Replace --with-zlib with --with-system-zlib
* zlib.m4 (AM_ZLIB): Replace --with-zlib with --with-system-zlib.
Antoine Tremblay [Wed, 25 Mar 2015 15:49:05 +0000 (11:49 -0400)]
Add cpu information to the info os command on linux.
This patch adds cpu information on linux based on /proc/cpuinfo as :
cpus Listing of all cpus/cores on the system
This patch also reorders the info os commands so that they are listed
in alphabetical order.
gdb/ChangeLog:
* NEWS: Mention info os cpus support.
* gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
(struct osdata_type): Add cpus entry, reorder the entries in
alphabetical order.
gdb/doc/ChangeLog:
* gdb.texinfo (Operating System Auxiliary Information): Add info os cpus
documentation, reorder the info os entries in alphabetical order.
Matthias Klose [Tue, 31 Mar 2015 13:15:42 +0000 (14:15 +0100)]
Fix the triplet regexp to recognize triplets, not only quadruplets
This allows triplets where the vendor is not set.
gdb/ChangeLog:
2015-03-31 Matthias Klose <doko@ubuntu.com>
* compile/compile.c (compile_to_object): Allow triplets with or
without vendor set.
H.J. Lu [Tue, 31 Mar 2015 10:58:15 +0000 (03:58 -0700)]
Remove --with-zlib from ld
This patch removes --with-zlib from ld.
ld/
* configure.ac (AM_ZLIB): Removed.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
ld/testsuite/
* ld-bootstrap/bootstrap.exp (extralibs): Add -lz.
H.J. Lu [Tue, 31 Mar 2015 10:55:56 +0000 (03:55 -0700)]
Add --with-system-zlib in gas
This patch adds --with-system-zlib and remove --with-zlib in gas.
gas/
* Makefile.am (ZLIBINC): New.
(AM_CFLAGS): Add $(ZLIBINC).
* as.c: (show_usage): Don't check HAVE_ZLIB_H.
(parse_args): Likewise.
* compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
(compress_init): Don't check HAVE_ZLIB_H.
(compress_data): Likewise.
(compress_finish): Likewise.
* configure.ac (AM_ZLIB): Removed.
(zlibinc): New. AC_SUBST.
Add --with-system-zlib.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
gas/testsuite/
* gas/i386/dw2-compress-1.d: Expect .zdebug_info.
H.J. Lu [Tue, 31 Mar 2015 10:53:41 +0000 (03:53 -0700)]
Add --with-system-zlib in binutils
This patch adds --with-system-zlib and remove --with-zlib in binutils.
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Add $(ZLIBINC).
(readelf_LDADD): Add $(ZLIB).
* configure.ac (AM_ZLIB): Removed.
(zlibdir): New. AC_SUBST.
(zlibinc): Likewise.
Add --with-system-zlib.
* readelf.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
(uncompress_section_contents): Don't check HAVE_ZLIB_H.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
Mike Frysinger [Tue, 31 Mar 2015 05:59:44 +0000 (01:59 -0400)]
sim: cr16/d10v: restore generated headers dep
While cleaning up stale make rules, one too many were deleted. The
build system autogenerates static rules, but not generated files.
Mike Frysinger [Tue, 31 Mar 2015 05:58:01 +0000 (01:58 -0400)]
common: cgen-mem/cgen-ops: fix extern inline handling
With newer versions of gcc (5.x), the extern inline we're using with the
cgen-{mem,ops} modules no longer work. Since this code really wants the
gnu inline semantics, use that attribute explicitly.
Mike Frysinger [Tue, 31 Mar 2015 05:54:47 +0000 (01:54 -0400)]
sim: m68hc11: fix gcc-5 build error w/restrict keyword
GDB Administrator [Tue, 31 Mar 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Doug Evans [Mon, 30 Mar 2015 23:41:05 +0000 (16:41 -0700)]
PR c++/18141
gdb/ChangeLog:
PR c++/18141
* cp-namespace.c (cp_search_static_and_baseclasses): Always look for
klass in VAR_DOMAIN.
Jing Yu [Mon, 30 Mar 2015 21:06:12 +0000 (14:06 -0700)]
Support AARCH64_TLSLD_ADD_DTPREL_* relocations.
Also Change _TLS_MODULE_BASE_. Always let it point to the start
of TLS segment.
2015-03-28 Jing Yu <jingyu@google.com>
* aarch64-reloc.def: New TLSLD_ADD_DTPREL_HI12,
TLSLD_ADD_DTPREL_LO12_NC.
* aarch64.cc (Target_aarch64::define_tls_base_symbol): Always
let _TLS_MODULE_BASE_ point to the start of tls segment.
(Target_aarch64::optimize_tls_reloc): Add cases for
R_AARCH64_TLSLD_ADD_DTPREL_HI12 and
R_AARCH64_TLSLD_ADD_DTPREL_LO12_NC.
(Target_aarch64::Scan::local): Likewise.
(Target_aarch64::Scan::global): Likewise.
(Target_aarch64::Relocate::relocate): Likewise.
(Target_aarch64::Relocate::relocate_tls): Likewise. And remove
subtracting tls segment size from symbol value for
TLSLD_*_DTPREL relocations.
Ed Schouten [Sat, 28 Mar 2015 07:33:21 +0000 (08:33 +0100)]
Update config.guess and config.sub to the latest upstream version
This version adds support for a platform I'd like to add support for,
namely CloudABI.
H.J. Lu [Mon, 30 Mar 2015 17:17:40 +0000 (10:17 -0700)]
Make all-bfd depend on all-zlib
* Makefile.def (dependencies): Add all-zlib to all-bfd.
* Makefile.in: Regenerated.
Mike Frysinger [Mon, 30 Mar 2015 07:05:57 +0000 (03:05 -0400)]
sim: arm: convert to nrun
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
Mike Frysinger [Mon, 30 Mar 2015 06:45:41 +0000 (02:45 -0400)]
sim: arm: delete NEED_UI_LOOP_HOOK handling
Mike Frysinger [Mon, 30 Mar 2015 06:41:51 +0000 (02:41 -0400)]
sim: arm: clean up misc warnings
Also delete a few unused funcs.
Mike Frysinger [Mon, 30 Mar 2015 06:27:22 +0000 (02:27 -0400)]
sim: arm: use common configure options
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
Gary Benson [Mon, 30 Mar 2015 13:58:33 +0000 (14:58 +0100)]
Remove three redundant wrapper functions in remote.c
gdb/ChangeLog:
* remote.c (remote_mourn_1): Remove function. Update all callers
to use remote_mourn.
(extended_remote_mourn_1): Remove function. Update all callers
to use extended_remote_mourn.
(extended_remote_attach_1): Remove function. Update all callers
to use extended_remote_attach.
H.J. Lu [Mon, 30 Mar 2015 11:40:33 +0000 (04:40 -0700)]
Properly set sh_info for .rela.plt/rel.plt section
Since .rela.plt/rel.plt section may contain relocations against .got.plt
section, we set sh_info for .rela.plt/rel.plt section to .got.plt section
index if target has .got.plt section.
bfd/
PR ld/18169
* elf-bfd.h (elf_backend_data): Add get_reloc_section.
(_bfd_elf_get_reloc_section): New.
* elf.c (_bfd_elf_get_reloc_section): Likewise.
(assign_section_numbers): Call get_reloc_section to look up the
section the relocs apply.
* elfxx-target.h (elf_backend_get_reloc_section): Likewise.
(elfNN_bed): Initialize get_reloc_section with
elf_backend_get_reloc_section.
ld/testsuite/
PR ld/18169
* ld-elf/linkinfo1a.d: Updated.
* ld-elf/linkinfo1b.d: Likewise.
Mike Frysinger [Mon, 30 Mar 2015 06:26:24 +0000 (02:26 -0400)]
sim: arm: move COPRO settings to the makefile
These values are the same all the time, so just list them directly in
the Makefile.
Mike Frysinger [Mon, 30 Mar 2015 07:06:20 +0000 (03:06 -0400)]
sim: d10v: add missing sim-main.h
Mike Frysinger [Mon, 30 Mar 2015 06:05:33 +0000 (02:05 -0400)]
sim: d10v: convert to nrun
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
Mike Frysinger [Mon, 30 Mar 2015 05:44:57 +0000 (01:44 -0400)]
sim: d10v: delete NEED_UI_LOOP_HOOK handling
This hook is used only when linked into gdb, and d10v doesn't have a gdb
port anymore. Punt it.
Mike Frysinger [Mon, 30 Mar 2015 05:38:59 +0000 (01:38 -0400)]
sim: d10v: clean up misc warnings
Mike Frysinger [Mon, 30 Mar 2015 05:14:04 +0000 (01:14 -0400)]
sim: d10v: use common configure options
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
Mike Frysinger [Mon, 30 Mar 2015 05:40:09 +0000 (01:40 -0400)]
opcodes: d10v: fix old style prototype
Mike Frysinger [Mon, 30 Mar 2015 05:06:57 +0000 (01:06 -0400)]
sim: d10v: link in missing testsuite
Looks like historical restructuring in this dir lost the d10v-elf subdir
and no one noticed in the meantime. Re-add it to the testsuite.
There are some failures, but better some tests get run than none at all.
Mike Frysinger [Mon, 30 Mar 2015 04:13:38 +0000 (00:13 -0400)]
sim: cr16: convert to nrun
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
Mike Frysinger [Mon, 30 Mar 2015 04:10:27 +0000 (00:10 -0400)]
sim: cr16: delete NEED_UI_LOOP_HOOK handling
This hook is used only when linked into gdb, and cr16 doesn't have a gdb
port anymore. Punt it.
Mike Frysinger [Mon, 30 Mar 2015 04:08:46 +0000 (00:08 -0400)]
sim: cr16: delete dead code
This code is getting in the way of porting to nrun, so just drop it.
If anyone actually cares about this cpu, they can revive it.
Mike Frysinger [Mon, 30 Mar 2015 02:41:14 +0000 (22:41 -0400)]
sim: cr16: clean up misc warnings
This page took 0.047149 seconds and 4 git commands to generate.