Stefano Stabellini [Thu, 24 Jun 2010 15:42:04 +0000 (16:42 +0100)]
xen: implement xen_hvm_register_pirq
xen_hvm_register_pirq allows the kernel to map a GSI into a Xen pirq and
receive the interrupt as an event channel from that point on.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Stefano Stabellini [Fri, 20 Aug 2010 13:46:52 +0000 (14:46 +0100)]
xen: get the maximum number of pirqs from xen
Use PHYSDEVOP_get_nr_pirqs to get the maximum number of pirqs from xen.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Stefano Stabellini [Thu, 1 Jul 2010 16:08:14 +0000 (17:08 +0100)]
xen: support pirq != irq
PHYSDEVOP_map_pirq might return a pirq different from what we asked if
we are running as an HVM guest, so we need to be able to support pirqs
that are different from linux irqs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Stefano Stabellini [Fri, 22 Oct 2010 20:24:06 +0000 (21:24 +0100)]
Merge commit 'konrad/stable/xen-pcifront-0.8.2' into 2.6.36-rc8-initial-domain-v6
Konrad Rzeszutek Wilk [Thu, 21 Oct 2010 13:36:07 +0000 (09:36 -0400)]
X86/PCI: Remove the dependency on isapnp_disable.
This looks to be vestigial dependency that had never been used even
in the original code base (2.6.18) from which this driver
was up-ported. Without this fix, with the CONFIG_ISAPNP, we get this
compile failure:
arch/x86/pci/xen.c: In function 'pci_xen_init':
arch/x86/pci/xen.c:138: error: 'isapnp_disable' undeclared (first use in this function)
arch/x86/pci/xen.c:138: error: (Each undeclared identifier is reported only once
arch/x86/pci/xen.c:138: error: for each function it appears in.)
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 20 Oct 2010 17:04:13 +0000 (13:04 -0400)]
xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
Without this dependency we get these compile errors:
linux-next-
20101020/drivers/xen/biomerge.c: In function 'xen_biovec_phys_mergeable':
linux-next-
20101020/drivers/xen/biomerge.c:8: error: dereferencing pointer to incomplete type
linux-next-
20101020/drivers/xen/biomerge.c:9: error: dereferencing pointer to incomplete type
linux-next-
20101020/drivers/xen/biomerge.c:11: error: implicit declaration of function '__BIOVEC_PHYS_MERGEABLE'
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Konrad Rzeszutek Wilk [Wed, 20 Oct 2010 15:34:16 +0000 (11:34 -0400)]
MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
Chris is working on other stuff now, and I am working full-time
with Jeremy on these bits.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Konrad Rzeszutek Wilk [Mon, 18 Oct 2010 21:11:10 +0000 (17:11 -0400)]
x86: xen: Sanitse irq handling (part two)
Thomas Gleixner cleaned up event handling to use the
sparse_irq handling, but the xen-pcifront patches utilized the
old mechanism. This fixes them to work with sparse_irq handling.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Fri, 8 Oct 2010 15:06:20 +0000 (11:06 -0400)]
swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
We used to depend on CONFIG_SWIOTLB, but that is disabled by default.
So when compiling we get this compile error:
arch/x86/xen/pci-swiotlb-xen.c: In function 'pci_xen_swiotlb_detect':
arch/x86/xen/pci-swiotlb-xen.c:48: error: lvalue required as left operand of assignment
Fix it by actually activating the SWIOTLB library.
Reported-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Mon, 4 Oct 2010 17:32:26 +0000 (13:32 -0400)]
MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Thu, 19 Aug 2010 17:34:58 +0000 (13:34 -0400)]
xen/pci: Request ACS when Xen-SWIOTLB is activated.
It used to done in the Xen startup code but that is not really
appropiate.
[v2: Update Kconfig with PCI requirement]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Ryan Wilson [Tue, 3 Aug 2010 01:31:05 +0000 (21:31 -0400)]
xen-pcifront: Xen PCI frontend driver.
This is a port of the 2.6.18 Xen PCI front driver with fixes
to make it build under 2.6.34 and later (for the full list of
changes: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
historic/xen-pcifront-0.1). It also includes the fixes
to make it work properly.
[v2: Updated Kconfig, removed crud, added Reviewed-by]
[v3: Added 'static', fixed grant table leak, redid Kconfig]
[v4: Added one more 'static' and removed comments]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Jan Beulich <JBeulich@novell.com>
Noboru Iwamatsu [Tue, 13 Oct 2009 21:22:29 +0000 (17:22 -0400)]
xenbus: prevent warnings on unhandled enumeration values
XenbusStateReconfiguring/XenbusStateReconfigured were introduced by
c/s 437, but aren't handled in many switch statements.
.. also pulled from the linux-2.6-sparse-tree tree.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Yosuke Iwamatsu [Tue, 13 Oct 2009 21:22:27 +0000 (17:22 -0400)]
xenbus: Xen paravirtualised PCI hotplug support.
The Xen PCI front driver adds two new states that are utilizez
for PCI hotplug support. This is a patch pulled from the
linux-2.6-xen-sparse tree.
Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
Alex Nixon [Thu, 18 Mar 2010 20:31:34 +0000 (16:31 -0400)]
xen/x86/PCI: Add support for the Xen PCI subsystem
The frontend stub lives in arch/x86/pci/xen.c, alongside other
sub-arch PCI init code (e.g. olpc.c).
It provides a mechanism for Xen PCI frontend to setup/destroy
legacy interrupts, MSI/MSI-X, and PCI configuration operations.
[ Impact: add core of Xen PCI support ]
[ v2: Removed the IOMMU code and only focusing on PCI.]
[ v3: removed usage of pci_scan_all_fns as that does not exist]
[ v4: introduced pci_xen value to fix compile warnings]
[ v5: squished fixes+features in one patch, changed Reviewed-by to Ccs]
[ v7: added Acked-by]
Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Qing He <qing.he@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Stefano Stabellini [Wed, 6 Oct 2010 20:12:28 +0000 (16:12 -0400)]
x86: Introduce x86_msi_ops
Introduce an x86 specific indirect mechanism to setup MSIs.
The MSI setup functions become function pointers in an x86_msi_ops
struct, that defaults to the implementation in io_apic.c and msi.c.
[v2: Use HAVE_DEFAULT_* knobs]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Wed, 6 Oct 2010 20:05:35 +0000 (16:05 -0400)]
msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
Introduce an override for the arch_[teardown|setup]_msi_irqs
that can be utilized to fallback to the default arch_* code.
If a platform wants to utilize the code paths defined
in driver/pci/msi.c it has to define HAVE_DEFAULT_MSI_TEARDOWN_IRQS
or HAVE_DEFAULT_MSI_SETUP_IRQS. Otherwise the old mechanism
of over-ridding the arch_* works fine.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: x86@kernel.org
Konrad Rzeszutek Wilk [Tue, 22 Dec 2009 19:49:45 +0000 (14:49 -0500)]
x86/PCI: Export pci_walk_bus function.
In preperation of modularizing Xen-pcifront the pci_walk_bus
needs to be exported so that the xen-pcifront module can walk
call the pci subsystem to walk the PCI devices and claim them.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> [http://marc.info/?l=linux-pci&m=126149958010298&w=2]
Jeremy Fitzhardinge [Thu, 18 Mar 2010 18:31:30 +0000 (14:31 -0400)]
x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
When mapping pci space via /sys or /proc, make sure we're really
doing a hardware mapping by setting _PAGE_IOMAP.
[ Impact: bugfix; make PCI mappings map the right pages ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: "H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: x86@kernel.org
Alex Nixon [Thu, 18 Mar 2010 18:28:12 +0000 (14:28 -0400)]
x86/PCI: Clean up pci_cache_line_size
Separate out x86 cache_line_size initialisation code into its own
function (so it can be shared by Xen later in this patch series)
[ Impact: cleanup ]
Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: "H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: x86@kernel.org
Konrad Rzeszutek Wilk [Mon, 4 Oct 2010 17:43:27 +0000 (13:43 -0400)]
xen: fix shared irq device passthrough
In driver/xen/events.c, whether bind_pirq is shareable or not is
determined by desc->action is NULL or not. But in __setup_irq,
startup(irq) is invoked before desc->action is assigned with
new action. So desc->action in startup_irq is always NULL, and
bind_pirq is always not shareable. This results in pt_irq_create_bind
failure when passthrough a device which shares irq to other devices.
This patch doesn't use probing_irq to determine if pirq is shareable
or not, instead set shareable flag in irq_info according to trigger
mode in xen_allocate_pirq. Set level triggered interrupts shareable.
Thus use this flag to set bind_pirq flag accordingly.
[v2: arch/x86/xen/pci.c no more, so file skipped]
Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Thu, 5 Nov 2009 21:33:09 +0000 (16:33 -0500)]
xen: Provide a variant of xen_poll_irq with timeout.
The 'xen_poll_irq_timeout' provides a method to pass in
the poll timeout for IRQs if requested. We also export
those two poll functions as Xen PCI fronted uses them.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Konrad Rzeszutek Wilk [Mon, 18 Oct 2010 14:49:10 +0000 (10:49 -0400)]
xen: Find an unbound irq number in reverse order (high to low).
In earlier Xen Linux kernels, the IRQ mapping was a straight 1:1 and the
find_unbound_irq started looking around 256 for open IRQs and up. IRQs
from 0 to 255 were reserved for PCI devices. Previous to this patch,
the 'find_unbound_irq' started looking at get_nr_hw_irqs() number.
For privileged domain where the ACPI information is available that
returns the upper-bound of what the GSIs. For non-privileged PV domains,
where ACPI is no-existent the get_nr_hw_irqs() reports the IRQ_LEGACY (16).
With PCI passthrough enabled, and with PCI cards that have IRQs pinned
to a higher number than 16 we collide with previously allocated IRQs.
Specifically the PCI IRQs collide with the IPI's for Xen functions
(as they are allocated earlier).
For example:
00:00.11 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI])
...
Interrupt: pin A routed to IRQ 18
[root@localhost ~]# cat /proc/interrupts | head
CPU0 CPU1 CPU2
16: 38186 0 0 xen-dyn-virq timer0
17: 149 0 0 xen-dyn-ipi spinlock0
18: 962 0 0 xen-dyn-ipi resched0
and when the USB controller is loaded, the kernel reports:
IRQ handler type mismatch for IRQ 18
current handler: resched0
One way to fix this is to reverse the logic when looking for un-used
IRQ numbers and start with the highest available number. With that,
we would get:
CPU0 CPU1 CPU2
... snip ..
292: 35 0 0 xen-dyn-ipi callfunc0
293: 3992 0 0 xen-dyn-ipi resched0
294: 224 0 0 xen-dyn-ipi spinlock0
295: 57183 0 0 xen-dyn-virq timer0
NMI: 0 0 0 Non-maskable interrupts
.. snip ..
And interrupts for PCI cards are now accessible.
This patch also includes the fix, found by Ian Campbell, titled
"xen: fix off-by-one error in find_unbound_irq."
[v2: Added an explanation in the code]
[v3: Rebased on top of tip/irq/core]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Jeremy Fitzhardinge [Thu, 13 Aug 2009 19:50:37 +0000 (12:50 -0700)]
xen: statically initialize cpu_evtchn_mask_p
Sometimes cpu_evtchn_mask_p can get used early, before it has been
allocated. Statically initialize it with an initdata version to catch
any early references.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Gerd Hoffmann [Mon, 4 Oct 2010 17:42:27 +0000 (13:42 -0400)]
xen: set pirq name to something useful.
Impact: cleanup
Make pirq show useful information in /proc/interrupts
[v2: Removed the parts for arch/x86/xen/pci.c ]
Signed-off-by: Gerd Hoffmann <kraxel@xeni.home.kraxel.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jeremy Fitzhardinge [Mon, 7 Jun 2010 20:28:49 +0000 (16:28 -0400)]
xen: dynamically allocate irq & event structures
Dynamically allocate the irq_info and evtchn_to_irq arrays, so that
1) the irq_info array scales to the actual number of possible irqs,
and 2) we don't needlessly increase the static size of the kernel
when we aren't running under Xen.
Derived on patch from Mike Travis <travis@sgi.com>.
[Impact: reduce memory usage ]
[v2: Conflict in drivers/xen/events.c: Replaced alloc_bootmen with kcalloc ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Mon, 18 Oct 2010 14:41:08 +0000 (10:41 -0400)]
xen: identity map gsi->irqs
Impact: preserve compat with native
Reserve the lower irq range for use for hardware interrupts so we
can identity-map them.
[v2: Rebased on top tip/irq/core]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jeremy Fitzhardinge [Fri, 13 Feb 2009 01:22:49 +0000 (17:22 -0800)]
x86/io_apic: add get_nr_irqs_gsi()
Impact: new interface to get max GSI
Add get_nr_irqs_gsi() to return nr_irqs_gsi. Xen will use this to
determine how many irqs it needs to reserve for hardware irqs.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Jeremy Fitzhardinge [Fri, 1 Oct 2010 16:20:09 +0000 (12:20 -0400)]
xen: implement pirq type event channels
A privileged PV Xen domain can get direct access to hardware. In
order for this to be useful, it must be able to get hardware
interrupts.
Being a PV Xen domain, all interrupts are delivered as event channels.
PIRQ event channels are bound to a pirq number and an interrupt
vector. When a IO APIC raises a hardware interrupt on that vector, it
is delivered as an event channel, which we can deliver to the
appropriate device driver(s).
This patch simply implements the infrastructure for dealing with pirq
event channels.
[ Impact: integrate hardware interrupts into Xen's event scheme ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jeremy Fitzhardinge [Mon, 9 Feb 2009 20:05:46 +0000 (12:05 -0800)]
xen: define BIOVEC_PHYS_MERGEABLE()
Impact: allow Xen control of bio merging
When running in Xen domain with device access, we need to make sure
the block subsystem doesn't merge requests across pages which aren't
machine physically contiguous. To do this, we define our own
BIOVEC_PHYS_MERGEABLE. When CONFIG_XEN isn't enabled, or we're not
running in a Xen domain, this has identical behaviour to the normal
implementation. When running under Xen, we also make sure the
underlying machine pages are the same or adjacent.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Alex Nixon [Mon, 9 Feb 2009 20:05:46 +0000 (12:05 -0800)]
xen: Don't disable the I/O space
If a guest domain wants to access PCI devices through the frontend
driver (coming later in the patch series), it will need access to the
I/O space.
[ Impact: Allow for domU IO access, preparing for pci passthrough ]
Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Thomas Gleixner [Sat, 16 Oct 2010 19:17:08 +0000 (21:17 +0200)]
arm: Use ARCH_IRQ_INIT_FLAGS
The core code now initializes the requested number of interrupts and
sets the flags in irq_desc.status which are requested by the
architecture via ARCH_IRQ_INIT_FLAGS.
Add ARCH_IRQ_INIT_FLAGS and remove the loop which sets those flags
after the irq descriptors are allocated.
[ This patch should have been in the original irq rework and got
dropped accidentaly ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Anand Gadiyar [Thu, 14 Oct 2010 17:29:57 +0000 (22:59 +0530)]
genirq, ARM: Fix boot on ARM platforms
Commit
b683de2b3 in linux-next as of
20101014 (genirq: Query
arch for number of early descriptors) seems to have broken
bootup on several ARM boards - my beagleboard gives the
following dump with earlyprintk:
NR_IRQS:402
Unable to handle kernel NULL pointer dereference at virtual
address
00000028 pgd =
c0004000
[
00000028] *pgd=
00000000
Internal error: Oops: 5 [#1]
last sysfs file:
Modules linked in:
CPU: 0 Not tainted
(2.6.36-rc7-next-
20101014-linux-next-
20101012+ #40) PC is at
init_IRQ+0x14/0x48 LR is at start_kernel+0x150/0x2c0
[...]
We seem to be using desc->status without assigning desc to
anything. Fix this by adding back the code that was originally
there.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
LKML-Reference: <
1287077397-21781-1-git-send-email-gadiyar@ti.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Thu, 14 Oct 2010 23:26:43 +0000 (16:26 -0700)]
Linux 2.6.36-rc8
Linus Torvalds [Thu, 14 Oct 2010 21:32:06 +0000 (14:32 -0700)]
Un-inline the core-dump helper functions
Tony Luck reports that the addition of the access_ok() check in commit
0eead9ab41da ("Don't dump task struct in a.out core-dumps") broke the
ia64 compile due to missing the necessary header file includes.
Rather than add yet another include (<asm/unistd.h>) to make everything
happy, just uninline the silly core dump helper functions and move the
bodies to fs/exec.c where they make a lot more sense.
dump_seek() in particular was too big to be an inline function anyway,
and none of them are in any way performance-critical. And we really
don't need to mess up our include file headers more than they already
are.
Reported-and-tested-by: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 14 Oct 2010 18:19:44 +0000 (11:19 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
ehea: Fix a checksum issue on the receive path
net: allow FEC driver to use fixed PHY support
tg3: restore rx_dropped accounting
b44: fix carrier detection on bind
net: clear heap allocations for privileged ethtool actions
NET: wimax, fix use after free
ATM: iphase, remove sleep-inside-atomic
ATM: mpc, fix use after free
ATM: solos-pci, remove use after free
net/fec: carrier off initially to avoid root mount failure
r8169: use device model DMA API
r8169: allocate with GFP_KERNEL flag when able to sleep
Linus Torvalds [Thu, 14 Oct 2010 17:57:40 +0000 (10:57 -0700)]
Don't dump task struct in a.out core-dumps
akiphie points out that a.out core-dumps have that odd task struct
dumping that was never used and was never really a good idea (it goes
back into the mists of history, probably the original core-dumping
code). Just remove it.
Also do the access_ok() check on dump_write(). It probably doesn't
matter (since normal filesystems all seem to do it anyway), but he
points out that it's normally done by the VFS layer, so ...
[ I suspect that we should possibly do "vfs_write()" instead of
calling ->write directly. That also does the whole fsnotify and write
statistics thing, which may or may not be a good idea. ]
And just to be anal, do this all for the x86-64 32-bit a.out emulation
code too, even though it's not enabled (and won't currently even
compile)
Reported-by: akiphie <akiphie@lavabit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 13 Oct 2010 23:51:59 +0000 (16:51 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/djbw/async_tx
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
ioat2: fix performance regression
Linus Torvalds [Wed, 13 Oct 2010 23:51:29 +0000 (16:51 -0700)]
Merge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink
Linus Torvalds [Wed, 13 Oct 2010 23:50:23 +0000 (16:50 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ring-buffer: Fix typo of time extends per page
perf, MIPS: Support cross compiling of tools/perf for MIPS
perf: Fix incorrect copy_from_user() usage
Linus Torvalds [Wed, 13 Oct 2010 23:35:33 +0000 (16:35 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: relax ioremap prohibition (
309caa9) for -final and -stable
ARM: 6440/1: ep93xx: DMA: fix channel_disable
cpuimx27: fix i2c bus selection
cpuimx27: fix compile when ULPI is selected
ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9
ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors
ARM: fix section mismatch warnings in Versatile Express
ARM: 6412/1: kprobes-decode: add support for MOVW instruction
ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags
ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption
Linus Torvalds [Wed, 13 Oct 2010 23:35:05 +0000 (16:35 -0700)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
omap: iommu-load cam register before flushing the entry
Linus Torvalds [Wed, 13 Oct 2010 23:34:46 +0000 (16:34 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: Silent spurious error message
drm/radeon/kms: fix bad cast/shift in evergreen.c
drm/radeon/kms: make TV/DFP table info less verbose
drm/radeon/kms: leave certain CP int bits enabled
drm/radeon/kms: avoid corner case issue with unmappable vram V2
Linus Torvalds [Wed, 13 Oct 2010 23:34:23 +0000 (16:34 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, numa: For each node, register the memory blocks actually used
x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order
x86, mce, therm_throt.c: Fix missing curly braces in error handling logic
Dan Williams [Wed, 13 Oct 2010 22:43:10 +0000 (15:43 -0700)]
ioat2: fix performance regression
Commit
0793448 "DMAENGINE: generic channel status v2" changed the interface for
how dma channel progress is retrieved. It inadvertently exported an internal
helper function ioat_tx_status() instead of ioat_dma_tx_status(). The latter
polls the hardware to get the latest completion state, while the helper just
evaluates the current state without touching hardware. The effect is that we
end up waiting for completion timeouts or descriptor allocation errors before
the completion state is updated.
iperf (before fix):
[SUM] 0.0-41.3 sec 364 MBytes 73.9 Mbits/sec
iperf (after fix):
[SUM] 0.0- 4.5 sec 499 MBytes 940 Mbits/sec
This is a regression starting with 2.6.35.
Cc: <stable@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: Richard Scobie <richard@sauce.co.nz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Breno Leitao [Thu, 7 Oct 2010 13:17:33 +0000 (13:17 +0000)]
ehea: Fix a checksum issue on the receive path
Currently we set all skbs with CHECKSUM_UNNECESSARY, even
those whose protocol we don't know. This patch just
add the CHECKSUM_COMPLETE tag for non TCP/UDP packets.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
J. Bruce Fields [Wed, 13 Oct 2010 18:46:17 +0000 (14:46 -0400)]
nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink
As of commit
43a9aa64a2f4330a9cb59aaf5c5636566bce067c "NFSD:
Fill in WCC data for REMOVE, RMDIR, MKNOD, and MKDIR", we sometimes call
fh_unlock on a filehandle that isn't fully initialized.
We should fix up the callers, but as a quick fix it is also sufficient
just to remove this assertion.
Reported-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Greg Ungerer [Mon, 11 Oct 2010 21:03:05 +0000 (21:03 +0000)]
net: allow FEC driver to use fixed PHY support
At least one board using the FEC driver does not have a conventional
PHY attached to it, it is directly connected to a somewhat simple
ethernet switch (the board is the SnapGear/LITE, and the attached
4-port ethernet switch is a RealTek RTL8305). This switch does not
present the usual register interface of a PHY, it presents nothing.
So a PHY scan will find nothing - it finds ID's of 0 for each PHY
on the attached MII bus.
After the FEC driver was changed to use phylib for supporting PHYs
it no longer works on this particular board/switch setup.
Add code support to use a fixed phy if no PHY is found on the MII bus.
This is based on the way the cpmac.c driver solved this same problem.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 12 Oct 2010 23:15:25 +0000 (00:15 +0100)]
ARM: relax ioremap prohibition (
309caa9) for -final and -stable
... but produce a big warning about the problem as encouragement
for people to fix their drivers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 12 Oct 2010 21:43:26 +0000 (22:43 +0100)]
Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6
Mika Westerberg [Tue, 12 Oct 2010 09:37:59 +0000 (10:37 +0100)]
ARM: 6440/1: ep93xx: DMA: fix channel_disable
When channel_disable() is called, it disables per channel interrupts and
waits until channels state becomes STATE_STALL, and then disables the
channel. Now, if the DMA transfer is disabled while the channel is in
STATE_NEXT we will not wait anything and disable the channel immediately.
This seems to cause weird data corruption for example in audio transfers.
Fix is to wait while we are in STATE_NEXT or STATE_ON and only then
disable the channel.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Thomas Gleixner [Tue, 12 Oct 2010 19:58:27 +0000 (21:58 +0200)]
genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build
This option can be set to verify the full conversion to the new chip
functions. Fix the fallout of the patch rework, so the core code
compiles and works with it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds [Tue, 12 Oct 2010 16:16:01 +0000 (09:16 -0700)]
Merge branch 'kvm-updates/2.6.36' of git://git./virt/kvm/kvm
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Move TSC reset out of vmcb_init
KVM: x86: Fix SVM VMCB reset
Steven Rostedt [Tue, 12 Oct 2010 16:06:43 +0000 (12:06 -0400)]
ring-buffer: Fix typo of time extends per page
Time stamps for the ring buffer are created by the difference between
two events. Each page of the ring buffer holds a full 64 bit timestamp.
Each event has a 27 bit delta stamp from the last event. The unit of time
is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events
happen more than 134 milliseconds apart, a time extend is inserted
to add more bits for the delta. The time extend has 59 bits, which
is good for ~18 years.
Currently the time extend is committed separately from the event.
If an event is discarded before it is committed, due to filtering,
the time extend still exists. If all events are being filtered, then
after ~134 milliseconds a new time extend will be added to the buffer.
This can only happen till the end of the page. Since each page holds
a full timestamp, there is no reason to add a time extend to the
beginning of a page. Time extends can only fill a page that has actual
data at the beginning, so there is no fear that time extends will fill
more than a page without any data.
When reading an event, a loop is made to skip over time extends
since they are only used to maintain the time stamp and are never
given to the caller. As a paranoid check to prevent the loop running
forever, with the knowledge that time extends may only fill a page,
a check is made that tests the iteration of the loop, and if the
iteration is more than the number of time extends that can fit in a page
a warning is printed and the ring buffer is disabled (all of ftrace
is also disabled with it).
There is another event type that is called a TIMESTAMP which can
hold 64 bits of data in the theoretical case that two events happen
18 years apart. This code has not been implemented, but the name
of this event exists, as well as the structure for it. The
size of a TIMESTAMP is 16 bytes, where as a time extend is only
8 bytes. The macro used to calculate how many time extends can fit on
a page used the TIMESTAMP size instead of the time extend size
cutting the amount in half.
The following test case can easily trigger the warning since we only
need to have half the page filled with time extends to trigger the
warning:
# cd /sys/kernel/debug/tracing/
# echo function > current_tracer
# echo 'common_pid < 0' > events/ftrace/function/filter
# echo > trace
# echo 1 > trace_marker
# sleep 120
# cat trace
Enabling the function tracer and then setting the filter to only trace
functions where the process id is negative (no events), then clearing
the trace buffer to ensure that we have nothing in the buffer,
then write to trace_marker to add an event to the beginning of a page,
sleep for 2 minutes (only 35 seconds is probably needed, but this
guarantees the bug), and then finally reading the trace which will
trigger the bug.
This patch fixes the typo and prevents the false positive of that warning.
Reported-by: Hans J. Koch <hjk@linutronix.de>
Tested-by: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Thomas Gleixner [Wed, 6 Oct 2010 14:28:51 +0000 (16:28 +0200)]
x86: Switch sparse_irq allocations to GFP_KERNEL
No callers from atomic context (except boot) anymore.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 5 Oct 2010 13:14:35 +0000 (15:14 +0200)]
genirq: Switch sparse_irq allocator to GFP_KERNEL
The allocator functions are now called outside of preempt disabled
regions. Switch to GFP_KERNEL.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Fri, 8 Oct 2010 10:47:53 +0000 (12:47 +0200)]
genirq: Make sparse_lock a mutex
No callers from atomic regions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Thu, 30 Sep 2010 10:19:03 +0000 (12:19 +0200)]
x86: lguest: Use new irq allocator
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Thomas Gleixner [Wed, 29 Sep 2010 15:18:47 +0000 (17:18 +0200)]
genirq: Remove the now unused sparse irq leftovers
The move_irq_desc() function was only used due to the problem that the
allocator did not free the old descriptors. So the descriptors had to
be moved in create_irq_nr(). That's history.
The code would have never been able to move active interrupt
descriptors on affinity settings. That can be done in a completely
different way w/o all this horror.
Remove all of it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Wed, 29 Sep 2010 16:46:55 +0000 (18:46 +0200)]
genirq: Sanitize dynamic irq handling
Use the cleanup functions of the dynamic allocator. No need to have
separate implementations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Wed, 29 Sep 2010 16:44:23 +0000 (18:44 +0200)]
genirq: Remove arch_init_chip_data()
This function should have not been there in the first place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Wed, 29 Sep 2010 15:37:10 +0000 (17:37 +0200)]
x86: xen: Sanitise sparse_irq handling
There seems to be more cleanups possible, but that's left to the xen
experts :)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Thomas Gleixner [Thu, 30 Sep 2010 09:26:43 +0000 (11:26 +0200)]
x86: Use sane enumeration
Instead of looping through all interrupts, use the bitmap lookup to
find the next.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Thu, 30 Sep 2010 09:43:08 +0000 (11:43 +0200)]
x86: uv: Clean up the direct access to irq_desc
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Mon, 4 Oct 2010 19:08:56 +0000 (21:08 +0200)]
x86: Make io_apic.c local functions static
No users outside of io_apic.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Mon, 11 Oct 2010 10:21:18 +0000 (12:21 +0200)]
genirq: Remove irq_2_iommu
irq_2_iommu is now in the x86 code where it belongs. Remove all
leftovers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Mon, 11 Oct 2010 09:55:37 +0000 (11:55 +0200)]
x86: Speed up the irq_remapped check in hot pathes
irq_2_iommu is in struct irq_cfg, so we can do the irq_remapped check
based on irq_cfg instead of going through a lookup function. That's
especially interesting in the eoi_ioapic_irq() hotpath.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Sun, 10 Oct 2010 10:34:27 +0000 (12:34 +0200)]
intr_remap: Simplify the code further
Having irq_2_iommu in struct irq_cfg allows further simplifications.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Sun, 10 Oct 2010 10:29:27 +0000 (12:29 +0200)]
intr_remap: Use irq_2_iommu in struct irq_cfg
Switch the intr_remapping code to use the irq_2_iommu struct in
irg_cfg.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Sun, 10 Oct 2010 09:39:09 +0000 (11:39 +0200)]
x86: Embedd irq_2_iommu into irq_cfg
That interrupt remapping code is x86 specific and tied to the io_apic
code. No need for separate allocator functions in the interrupt
remapping code. This allows to simplify the code and irq_2_iommu is
small (13 bytes on 64bit) so it's not a real problem even if interrupt
remapping is runtime disabled. If it's compile time disabled the
impact is zero.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Mon, 4 Oct 2010 16:41:37 +0000 (18:41 +0200)]
pci: intr_remap: Remove unused functions
No users.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Mon, 4 Oct 2010 14:51:27 +0000 (16:51 +0200)]
pci: intr_remap: Use irq_data
No need to dereference irq_desc.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Mon, 4 Oct 2010 14:20:16 +0000 (16:20 +0200)]
pci: intr-remap: Free irte memory if SPARSE_IRQ=y
With SPARSE_IRQ=y the irte descriptors are dynamically allocated, but not
freed in free_irte().
That was ok as long as the sparse irq core was not freeing irq descriptors on
destroy_irq(). Now we leak the irte descriptor. Free it in free_irte().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Fri, 8 Oct 2010 08:40:53 +0000 (10:40 +0200)]
x86: io_apic: Remove the now unused sparse_irq arch_* functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 18:34:53 +0000 (20:34 +0200)]
x86: ioapic: Cleanup sparse irq code
Switch over to the new allocator and remove all the magic which was
caused by the unability to destroy irq descriptors. Get rid of the
create_irq_nr() loop for sparse and non sparse irq.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Yinghai Lu [Sat, 9 Oct 2010 05:44:02 +0000 (22:44 -0700)]
x86: Don't setup ioapic irq for sci twice
The sparseirq rework triggered a warning in the iommu code, which was
caused by setting up ioapic for ACPI irq 9 twice. This function is
solely to handle interrupts which are on a secondary ioapic and
outside the legacy irq range.
Replace the sparse irq_to_desc check with a non ifdeffed version.
[ tglx: Moved it before the ioapic sparse conversion and simplified
the inverse logic ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <
4CB00122.
3030301@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Fri, 8 Oct 2010 08:44:21 +0000 (10:44 +0200)]
x86: io_apic: Prepare alloc/free_irq_cfg()
Rename the grossly misnamed get_one_free_irq_cfg() to alloc_irq_cfg().
Add a (not yet used) irq number argument to free_irq_cfg()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Wed, 6 Oct 2010 20:14:21 +0000 (22:14 +0200)]
x86: Implement new allocator functions
Implement new allocator functions which make use of the core changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Wed, 6 Oct 2010 20:07:03 +0000 (22:07 +0200)]
x86: ioapic: Cleanup get_one_free_irq_cfg()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 21:31:50 +0000 (23:31 +0200)]
x86: ioapic: Cleanup some more
Cleanup after the irq_chip conversion a bit.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Fri, 8 Oct 2010 20:31:46 +0000 (22:31 +0200)]
x86: Convert ht set_affinity to new chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Fri, 8 Oct 2010 20:21:26 +0000 (22:21 +0200)]
x86: Cleanup hpet affinity setting
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Fri, 8 Oct 2010 20:19:29 +0000 (22:19 +0200)]
x86: Convert dmar affinity setting to new chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Thomas Gleixner [Fri, 8 Oct 2010 20:15:49 +0000 (22:15 +0200)]
x86: Convert remapped msi to new chip.irq_set_affinity function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Fri, 8 Oct 2010 19:50:22 +0000 (21:50 +0200)]
x86: Convert remapped ioapic affinity setting to new irq chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Thomas Gleixner [Fri, 8 Oct 2010 19:49:03 +0000 (21:49 +0200)]
x86: Convert msi affinity setting to new chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Fri, 8 Oct 2010 19:40:23 +0000 (21:40 +0200)]
x86: Prepare the affinity common functions for taking struct irq_data *
While at it rename it to sensible function names and fix the return
value from unsigned to int for __ioapic_set_affinity (set_desc_affinity).
Returning -1 in a function returning unsigned int is somewhat strange.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 15:28:38 +0000 (17:28 +0200)]
x86: ioapic: Clean up the direct access to irq_desc
Most of it is useless pseudo optimization.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 15:22:09 +0000 (17:22 +0200)]
ht: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Thomas Gleixner [Tue, 28 Sep 2010 15:15:11 +0000 (17:15 +0200)]
dmar: Convert to new irq chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Thomas Gleixner [Tue, 28 Sep 2010 14:18:39 +0000 (16:18 +0200)]
x86: ioapic/hpet: Convert to new chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 14:03:54 +0000 (16:03 +0200)]
x86: ioapic: Convert mask to new irq_chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 14:00:34 +0000 (16:00 +0200)]
x86: io_apic: Convert startup to new irq_chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 13:18:35 +0000 (15:18 +0200)]
x86: Cleanup io_apic
Sanitize functions. Remove irq_desc pointer magic.
Preparatory patch for further cleanups.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Fri, 24 Sep 2010 10:26:18 +0000 (12:26 +0200)]
x86: Cleanup access to irq_data
Fixup the open coded access to
irq_desc->[handler_data|chip_data|msi-desc]
Use the macros and inline functions for it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 13:01:33 +0000 (15:01 +0200)]
x86: i8259: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 12:59:58 +0000 (14:59 +0200)]
x86: Cleanup visws interrupt handling
Remove the open coded access to irq_desc and convert to the new irq
chip functions. Change the mask function of piix4_virtual_irq_type so
we can use the generic irq handling function for the virtual interrupt
instead of open coding it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Tue, 28 Sep 2010 12:57:24 +0000 (14:57 +0200)]
x86: lguest: Convert to new irq chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Thomas Gleixner [Tue, 28 Sep 2010 09:11:10 +0000 (11:11 +0200)]
x86: Sanitize apb timer interrupt handling
Disable the interrupt in CPU_DEAD where it belongs. Remove the
open coded irq_desc manipulation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Thomas Gleixner [Fri, 8 Oct 2010 18:24:58 +0000 (20:24 +0200)]
x86: Convert irq_chip access to new functions
Before moving the irq chips to the new functions, fixup direct callers.
The cpu offline irq fixup code needs to become generic and archs need
to honour the "force" flag as an indicator, but that's for later.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
This page took 0.046199 seconds and 5 git commands to generate.