Olof Johansson [Sun, 9 Mar 2014 19:46:59 +0000 (12:46 -0700)]
ARM: enable ARM_HAS_SG_CHAIN for multiplatform
Enable ARM_HAS_SG_CHAIN for all multiplatform targets, it makes sense
to enable on all "modern" platforms; downsides are limited for platforms
that don't need it.
Requested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 9 Mar 2014 19:03:18 +0000 (12:03 -0700)]
Merge tag 'imx-soc-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
i.MX SoC changes for 3.15 from Shawn Guo:
- Support suspend from ocram (DDR IO floating) for imx6 platforms
- Add cpuidle support for imx6sl
- Sparse warning fixes for imx6sl and vf610 clock code
- Remove PWM platform code
- Support ptp and rmii clock from pad
- Support WEIM CS GPR configuration
- Random cleanups and defconfig updates
* tag 'imx-soc-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6: (373 commits)
ARM: imx6: drop .text.head section annotation from headsmp.S
ARM: imx6: build suspend-imx6.o with CONFIG_SOC_IMX6
ARM: imx6: rename pm-imx6q.c to pm-imx6.c
ARM: imx6: introduce CONFIG_SOC_IMX6 for i.MX6 common stuff
ARM: imx6: do not call imx6q_suspend_init() with !CONFIG_SUSPEND
ARM: imx6: call suspend_set_ops() from suspend routine
ARM: imx6: build headsmp.o only on CONFIG_SMP
ARM: imx6: move v7_cpu_resume() into suspend-imx6.S
ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority
ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr
bus: imx-weim: support CS GPR configuration
ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53
ARM: imx_v6_v7_defconfig: Select CONFIG_DEBUG_FS
ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC level
ARM: imx: add speed grading check for i.mx6 soc
ARM: imx: avoid calling clk APIs in idle thread which may cause schedule
ARM: imx6q: support ptp and rmii clock from pad
ARM: imx6q: remove unneeded clk lookups
ARM: imx_v6_v7_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
ARM: imx_v4_v5_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
...
Olof Johansson [Sun, 9 Mar 2014 07:18:04 +0000 (23:18 -0800)]
Merge tag 'omap-for-v3.15/prcm-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/soc
Power, reset and clock related changes via Paul Walmsley <paul@pwsan.com>, via
Tony Lindgren:
Some low-level optimizations and fixes that don't belong in an -rc
series for various OMAP-family chips, targeted for v3.15.
Basic build, boot, and PM test logs are available here:
http://www.pwsan.com/omap/testlogs/prcm-a-for-v3.15/
20140228124518/
* tag 'omap-for-v3.15/prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP3+: DPLL: stop reparenting to same parent if already done
ARM: OMAP2+: clock: fix rate prints
ARM: AM43x: hwmod data: register spinlock OCP interface
ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support
ARM: OMAP2+: AM43xx: implement support for machine restart
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 9 Mar 2014 07:02:00 +0000 (23:02 -0800)]
Merge tag 'omap-for-v3.15/soc-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/soc
OMAP SoC changes from Tony Lindgren:
Few SoC related improvments for omaps.
* tag 'omap-for-v3.15/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF
ARM: OMAP2+: AM43x: Use gptimer as clocksource
ARM: OMAP2+: AM43x: determine features
ARM: OMAP2+: AM43x: Add ID for ES1.1
ARM: OMAP2+: AM43x: enable in default config
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 9 Mar 2014 06:55:31 +0000 (22:55 -0800)]
Merge tag 'v3.15-rockchip-smp' of git://git./linux/kernel/git/mmind/linux-rockchip into next/soc
Merge Rockchip SMP support from Heiko Stübner:
SMP-support for RK3066 and RK3188 SoCs from Rockchip.
* tag 'v3.15-rockchip-smp' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: add smp bringup code
ARM: rockchip: add power-management-unit
ARM: rockchip: add sram dt nodes and documentation
ARM: rockchip: add snoop-control-unit
Signed-off-by: Olof Johansson <olof@lixom.net>
Shawn Guo [Thu, 27 Feb 2014 08:30:24 +0000 (16:30 +0800)]
ARM: imx6: drop .text.head section annotation from headsmp.S
The function v7_secondary_startup() works just fine in .text section, so
there is no need to have .text.head section annotation at all. Drop it.
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Thu, 27 Feb 2014 08:00:55 +0000 (16:00 +0800)]
ARM: imx6: build suspend-imx6.o with CONFIG_SOC_IMX6
Even when CONFIG_SUSPEND is enabled, it makes no sense to build
suspend-imx6.o if none of i.MX6 support is built in. Let's build
suspend-imx6.o only when both CONFIG_SUSPEND and CONFIG_SOC_IMX6 are
enabled.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Thu, 27 Feb 2014 07:28:48 +0000 (15:28 +0800)]
ARM: imx6: rename pm-imx6q.c to pm-imx6.c
The pm-imx6q.c works for all i.MX6 SoCs, so let's rename it to pm-imx6.c
and have the build controlled by option CONFIG_SOC_IMX6.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Thu, 27 Feb 2014 07:22:49 +0000 (15:22 +0800)]
ARM: imx6: introduce CONFIG_SOC_IMX6 for i.MX6 common stuff
The i.MX6 SoCs have something in common, so let's introduce
CONFIG_SOC_IMX6 for those stuff.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Wed, 26 Feb 2014 13:40:32 +0000 (21:40 +0800)]
ARM: imx6: do not call imx6q_suspend_init() with !CONFIG_SUSPEND
When CONFIG_SUSPEND is not enabled, we should reasonably skip the call
to imx6q_suspend_init().
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Wed, 26 Feb 2014 13:28:18 +0000 (21:28 +0800)]
ARM: imx6: call suspend_set_ops() from suspend routine
Rename function imx6q_ocram_suspend_init() to imx6q_suspend_init() and
call suspend_set_ops() from there. Now we get a centralized function
for suspend initialization.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Wed, 26 Feb 2014 11:57:56 +0000 (19:57 +0800)]
ARM: imx6: build headsmp.o only on CONFIG_SMP
With v7_cpu_resume() being moved out of headsmp.S, all the remaining
code in the file is only needed by CONFIG_SMP build. So we can control
the build of headsmp.o with only obj-$(CONFIG_SMP) now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Wed, 26 Feb 2014 11:48:33 +0000 (19:48 +0800)]
ARM: imx6: move v7_cpu_resume() into suspend-imx6.S
The suspend-imx6.S is introduced recently for suspend low-level assembly
code. Since function v7_cpu_resume() is only used by suspend support,
it makes sense to move the function into suspend-imx6.S, and control the
build of the file with CONFIG_SUSPEND option.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Philipp Zabel [Mon, 24 Feb 2014 13:51:50 +0000 (14:51 +0100)]
ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority
This is needed so that the IPU framebuffer scanout cannot be
starved by VPU or GPU activity.
Some boards like the SabreLite and SabreSD seem to set this in
the DCD already, but the documented register reset values do not
contain the necessary settings.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Philipp Zabel [Mon, 24 Feb 2014 13:51:49 +0000 (14:51 +0100)]
ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr
Masks for IPU AXI transaction QoS settings
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Tue, 11 Feb 2014 01:52:09 +0000 (09:52 +0800)]
bus: imx-weim: support CS GPR configuration
For imx50-weim and imx6q-weim type of devices, there might a WEIM CS
space configuration register in General Purpose Register controller,
e.g. IOMUXC_GPR1 on i.MX6Q.
Depending on which configuration of the following 4 is chosen for given
system, IOMUXC_GPR1[11:0] should be set up as 05, 033, 0113 or 01111
correspondingly.
CS0(128M) CS1(0M) CS2(0M) CS3(0M)
CS0(64M) CS1(64M) CS2(0M) CS3(0M)
CS0(64M) CS1(32M) CS2(32M) CS3(0M)
CS0(32M) CS1(32M) CS2(32M) CS3(32M)
The patch creates a function for such type of devices, which scans
'ranges' property of WEIM node and build the GPR value incrementally.
Thus the WEIM CS GPR can be set up automatically at boot time.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Philippe De Muyter <phdm@macqel.be>
Tested-by: Philippe De Muyter <phdm@macqel.be>
Fabio Estevam [Fri, 21 Feb 2014 22:21:40 +0000 (19:21 -0300)]
ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53
SOC_IMX53 is a device-tree only platform, so we don't need
IMX_HAVE_PLATFORM_IMX2_WDT at all because this symbol only provides some code
to help register imx2-wdt platform devices.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Fabio Estevam [Mon, 17 Feb 2014 17:51:00 +0000 (14:51 -0300)]
ARM: imx_v6_v7_defconfig: Select CONFIG_DEBUG_FS
CONFIG_DEBUG_FS is a very useful debug option as it allow us to access key
data such as the clock tree, for example:
mount -t debugfs debugfs /sys/kernel/debug
cat /sys/kernel/debug/clk/clk_summary
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Fabio Estevam [Mon, 17 Feb 2014 17:04:17 +0000 (14:04 -0300)]
ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC level
Booting a mx6q system built with multi_v7_defconfig leads to the following
error messages on boot:
[ 0.037758] imx6q_ocram_suspend_init: ocram pool unavailable!
[ 0.037768] imx6_pm_common_init: failed to initialize ocram suspend -19!
This happens because CONFIG_SRAM is not selected by default in
multi_v7_defconfig.
Fix this by selecting CONFIG_SRAM at ARCH_MXC level, so that other SoCs could
use the SRAM driver as well.
As SRAM automatically selects GENERIC_ALLOCATOR, just drop it from the Kconfig
entry.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Anson Huang [Wed, 12 Feb 2014 09:57:03 +0000 (17:57 +0800)]
ARM: imx: add speed grading check for i.mx6 soc
The fuse map of speed_grading[1:0] defines the max speed
of ARM, see below the definition:
2b'11: 1200000000Hz;
2b'10: 996000000Hz;
2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
2b'00: 792000000Hz;
Need to remove all illegal setpoints according to fuse
map.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Anson Huang [Tue, 11 Feb 2014 08:25:48 +0000 (16:25 +0800)]
ARM: imx: avoid calling clk APIs in idle thread which may cause schedule
As clk_pllv3_wait_lock will call usleep_range, and the clk APIs
mutex lock may be held when CPU entering idle, so calling clk
APIs must be avoided in cpu idle thread, this is to avoid reschedule
warning in cpu idle, just access register directly to achieve that.
bad: scheduling from the idle thread!
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc1+ #657
Backtrace:
[<
80012188>] (dump_backtrace) from [<
8001246c>] (show_stack+0x18/0x1c)
r6:
808c0038 r5:
00000000 r4:
808e5a1c r3:
00000000
[<
80012454>] (show_stack) from [<
8064b2ec>] (dump_stack+0x84/0x9c)
[<
8064b268>] (dump_stack) from [<
80055ee0>] (dequeue_task_idle+0x20/0x30)
r5:
808bef40 r4:
bf7dff40
[<
80055ec0>] (dequeue_task_idle) from [<
8004f028>] (dequeue_task+0x30/0x50)
r4:
bf7dff40 r3:
80055ec0
[<
8004eff8>] (dequeue_task) from [<
800503c0>] (deactivate_task+0x30/0x34)
r4:
bf7dff40
[<
80050390>] (deactivate_task) from [<
8064d8e4>] (__schedule+0x2c8/0x5c0)
[<
8064d61c>] (__schedule) from [<
8064dc14>] (schedule+0x38/0x88)
r10:
80912964 r9:
808c1e50 r8:
808c0038 r7:
808cbf30 r6:
80e128ec r5:
60000093
r4:
80912968
[<
8064dbdc>] (schedule) from [<
8064dfec>] (schedule_preempt_disabled+0x10/0x14)
[<
8064dfdc>] (schedule_preempt_disabled) from [<
8064ebc0>] (mutex_lock_nested+0x1c0/0x3c0)
[<
8064ea00>] (mutex_lock_nested) from [<
804ae71c>] (clk_prepare_lock+0x44/0xe4)
r10:
806554cc r9:
bf7df1bc r8:
808cf4f8 r7:
808cf544 r6:
bf7df1b8 r5:
808c0010
r4:
80e69750
[<
804ae6d8>] (clk_prepare_lock) from [<
804af214>] (clk_get_rate+0x14/0x64)
r6:
bf7df1b8 r5:
00000002 r4:
bf017000 r3:
80922ad0
[<
804af200>] (clk_get_rate) from [<
80025d30>] (imx6sl_set_wait_clk+0x18/0x20)
r5:
00000002 r4:
00000001
[<
80025d18>] (imx6sl_set_wait_clk) from [<
80023454>] (imx6sl_enter_wait+0x20/0x48)
[<
80023434>] (imx6sl_enter_wait) from [<
80477c24>] (cpuidle_enter_state+0x44/0xfc)
r4:
3c386e48 r3:
80023434
[<
80477be0>] (cpuidle_enter_state) from [<
80477dd8>] (cpuidle_idle_call+0xfc/0x160)
r8:
808cf4f8 r7:
00000001 r6:
80e69534 r5:
00000000 r4:
bf7df1b8
[<
80477cdc>] (cpuidle_idle_call) from [<
8000f61c>] (arch_cpu_idle+0x10/0x50)
r9:
808c0000 r8:
00000000 r7:
80921a89 r6:
808c8938 r5:
808c899c r4:
808c0000
[<
8000f60c>] (arch_cpu_idle) from [<
8006fa94>] (cpu_startup_entry+0x108/0x160)
[<
8006f98c>] (cpu_startup_entry) from [<
806452ac>] (rest_init+0xb4/0xdc)
r7:
808afae0
[<
806451f8>] (rest_init) from [<
8086fb58>] (start_kernel+0x328/0x38c)
r6:
ffffffff r5:
808c8880 r4:
808c8a30
[<
8086f830>] (start_kernel) from [<
80008074>] (0x80008074)
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Thu, 6 Feb 2014 05:22:02 +0000 (13:22 +0800)]
ARM: imx6q: support ptp and rmii clock from pad
On imx6qdl, the ENET RMII and PTP clock can come from either internal
ANATOP/CCM or external clock source through pad GPIO_16. But in case
of the external clock source, bit IOMUXC_GPR1[21] needs to be cleared.
The patch adds the support for systems that use an external clock source
and distinguishes above two cases by checking if the PTP clock specified
in device tree is the one coming from the internal ANATOP/CCM.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Thu, 6 Feb 2014 03:28:58 +0000 (11:28 +0800)]
ARM: imx6q: remove unneeded clk lookups
Since commit (
a94f8ec ARM: imx6q: remove board specific CLKO setup),
a number of clk lookups in imx6q clock driver is no longer needed.
Let's remove them.
The cpu0 lookup is also removed since we are now running imx6 cpufreq
driver and looking up clocks from device tree.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Fabio Estevam [Thu, 30 Jan 2014 15:04:12 +0000 (13:04 -0200)]
ARM: imx_v6_v7_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
PM subsystem treats mmc card as removed during suspend.
If MMC is used to store the root file system, it is better to tell the kernel
not to treat it as a removable media, so select CONFIG_MMC_UNSAFE_RESUME for
such purpose.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Fabio Estevam [Thu, 30 Jan 2014 15:04:11 +0000 (13:04 -0200)]
ARM: imx_v4_v5_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
PM subsystem treats mmc card as removed during suspend.
If MMC is used to store the root file system, it is better to tell the kernel
not to treat it as a removable media, so select CONFIG_MMC_UNSAFE_RESUME for
such purpose.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Sebastian Andrzej Siewior [Wed, 22 Jan 2014 11:35:44 +0000 (12:35 +0100)]
ARM: imx: enable delaytimer on the imx timer
The imx can support timer-based delays, so implement this.
Skips past jiffy calibration.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Anson Huang [Wed, 22 Jan 2014 07:14:47 +0000 (15:14 +0800)]
ARM: imx: add always-on clock array for i.mx6sl to maintain correct usecount
IPG, ARM and MMDC's clock should be enabled during kernel boot up,
so we need to maintain their usecount, otherwise, they may be
disabled unexpectedly if their children's clock are turned off, and
caused their parent PLLs also get disabled, which is incorrect.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Anson Huang [Fri, 17 Jan 2014 03:39:07 +0000 (11:39 +0800)]
ARM: imx: add suspend in ocram support for i.mx6sl
i.MX6SL's suspend in ocram function is derived from i.MX6Q,
it can lower the DDR IO power from ~10mA@1.2V to ~1mA@1.2V,
measured on i.MX6SL EVK board, SH5.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Anson Huang [Fri, 17 Jan 2014 03:39:06 +0000 (11:39 +0800)]
ARM: imx: add suspend in ocram support for i.mx6dl
i.MX6DL's suspend in ocram function is derived from i.MX6Q,
it can lower the DDR IO power from ~26mA@1.5V to ~15mA@1.5V,
measured on i.MX6DL SabreSD board, R25.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Anson Huang [Fri, 17 Jan 2014 03:39:05 +0000 (11:39 +0800)]
ARM: imx: add suspend in ocram support for i.mx6q
When system enter suspend, we can set the DDR IO to
high-Z state to save DDR IOs' power consumption, this
operation can save many power(from ~26mA@1.5V to ~15mA@1.5V,
measured on i.MX6Q SabreSD board, R25) of DDR IOs. To
achieve that, we need to copy the suspend code to ocram
and run the low level hardware related code(set DDR IOs
to high-Z state) in ocram.
If there is no ocram space available, then system will
still do suspend in external DDR, hence no DDR IOs will
be set to high-Z.
The OCRAM usage layout is as below,
ocram suspend region(4K currently):
======================== high address ======================
.
.
.
^
^
^
imx6_suspend code
PM_INFO structure(imx6_cpu_pm_info)
======================== low address =======================
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Sascha Hauer [Thu, 16 Jan 2014 15:39:42 +0000 (16:39 +0100)]
ARM i.MX: remove PWM platform support
As the i.MX pwm driver is devicetree only, remove the platform
support for this device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Liu Ying [Wed, 15 Jan 2014 06:19:58 +0000 (14:19 +0800)]
ARM: imx: clk-vf610: Suppress duplicate const sparse warning
There should be no duplicate const specifiers for those static
constant character string arrays defined for clock mux options.
Also, the arrays are only taken as the 5th argument for the
imx_clk_mux() function, which is in the type of 'const char
**parents'. So, let's remove the 2nd const specifier right
after 'char'.
This patch fixes these sparse warnings:
arch/arm/mach-imx/clk-vf610.c:66:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:67:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:68:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:69:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:70:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:71:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:72:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:73:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:74:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:75:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:76:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:77:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:78:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:79:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:80:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:81:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:83:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:84:25: warning: duplicate const
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Liu Ying [Wed, 15 Jan 2014 06:19:34 +0000 (14:19 +0800)]
ARM: imx: clk-imx6sl: Suppress duplicate const sparse warning
There should be no duplicate const specifiers for those static
constant character string arrays defined for clock mux options.
Also, the arrays are only taken as the 5th argument for the
imx_clk_mux() function, which is in the type of 'const char
**parents'. So, let's remove the 2nd const specifier right
after 'char'.
This patch fixes these sparse warnings:
arch/arm/mach-imx/clk-imx6sl.c:21:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:22:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:23:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:24:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:25:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:26:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:27:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:28:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:29:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:30:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:31:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:32:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:33:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:34:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:35:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:36:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:37:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:38:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:39:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:40:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:41:25: warning: duplicate const
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
John Tobias [Tue, 14 Jan 2014 14:36:47 +0000 (06:36 -0800)]
ARM: imx: add select on ARCH_MXC for cpufreq support
Move ARCH_HAS_CPUFREQ, ARCH_HAS_OPP and PM_OPP on ARCH_MXC so that
the user can enable the cpufreq support for iMX6Q and/or iMX6SL.
Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Denis Carikli [Fri, 10 Jan 2014 15:40:41 +0000 (16:40 +0100)]
ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35.
The eukrea cpuimx35 has a pcf8563 RTC and a LCD gpio regulator.
We enable the respective drivers in order to be able to use theses
features with this configuration.
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Denis Carikli [Fri, 10 Jan 2014 15:40:39 +0000 (16:40 +0100)]
ARM i.MX35: build in pinctrl support.
shawn.guo: While at it, we drop 'select PINCTRL' from SOC_IMX35, since
it's been covered by ARCH_MXC.
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Denis Carikli [Fri, 10 Jan 2014 15:07:24 +0000 (16:07 +0100)]
ARM: imx_v6_v7_defconfig: Enable backlight gpio support.
The eukrea mbimxsd51 has a gpio backlight for its
LCD display, so we turn that driver on.
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Anson Huang [Thu, 9 Jan 2014 08:03:16 +0000 (16:03 +0800)]
ARM: imx: add cpuidle support for i.mx6sl
Add cpuidle support for i.MX6SL, currently only support
two cpuidle levels(ARM wfi and WAIT mode), and add software
workaround for WAIT mode errata as below:
ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
during WAIT mode entry process could cause cache memory
corruption.
Software workaround:
To prevent this issue from occurring, software should ensure that
the ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before
entering WAIT mode.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Anson Huang [Tue, 7 Jan 2014 17:46:04 +0000 (12:46 -0500)]
ARM: imx: AHB rate must be set to 132MHz on i.mx6sl
The reset value of AHB divider is 3, so current AHB rate
is 99MHz which is not correct for kernel, need to ensure
AHB rate is 132MHz in clk driver, as ipg is sourcing from
AHB, and it should be 66MHz by default.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Fabio Estevam [Tue, 7 Jan 2014 10:00:40 +0000 (08:00 -0200)]
ARM: imx: Use INT_MEM_CLK_LPM as the bit name
Bit 17 of register CCM_CGPR is called INT_MEM_CLK_LPM as per the mx6
reference manual, so use this name instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Fabio Estevam [Mon, 30 Dec 2013 13:12:01 +0000 (11:12 -0200)]
ARM: imx_v6_v7_defconfig: Select PCI support
Let PCI driver be enabled by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Wed, 5 Mar 2014 02:31:54 +0000 (10:31 +0800)]
Merge tag 'kconfig-cleanup-for-3.15' into imx/soc
- Remove common kconfig options required by multi-platform builds out
of individual platforms as they are redundant.
- Make SMP, CACHE_L2X0 and GPIO config options user visible on
multi-platform builds as most platforms enable these options and all
platforms can run with them enabled.
- Make multi-platform v6 default to more optimal v6k rather than v6
- Remove the last bit of mach-virt and convert it to just a kconfig
option.
Conflicts:
arch/arm/mach-omap2/Kconfig
Heiko Stuebner [Mon, 17 Jun 2013 20:29:23 +0000 (22:29 +0200)]
ARM: rockchip: add smp bringup code
This adds the necessary smp-operations and startup code to use
additional cores on Rockchip SoCs.
We currently hog the power management unit in the smp code, as it is
necessary to control the power to the cpu core and nothing else is
currently using it, so a generic implementation can be done later.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Heiko Stuebner [Mon, 17 Jun 2013 20:17:16 +0000 (22:17 +0200)]
ARM: rockchip: add power-management-unit
The pmu is needed to bring up the cores during smp operations and later
also other system parts. Therefore add a node and documentation for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Heiko Stuebner [Mon, 17 Jun 2013 20:08:31 +0000 (22:08 +0200)]
ARM: rockchip: add sram dt nodes and documentation
Add dt-nodes for the sram on rk3066 and rk3188 including the reserved section
needed for smp bringup.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Heiko Stuebner [Mon, 17 Jun 2013 19:28:57 +0000 (21:28 +0200)]
ARM: rockchip: add snoop-control-unit
This adds the device-node and config select to enable the
scu in all Rockchip Cortex-A9 SoCs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Tony Lindgren [Fri, 28 Feb 2014 23:41:55 +0000 (15:41 -0800)]
Merge tag 'for-v3.15/omap-hwmod-clk-prcm-a' of git://git./linux/kernel/git/pjw/omap-pending into omap-for-v3.15/prcm
Some low-level optimizations and fixes that don't belong in an -rc
series for various OMAP-family chips, targeted for v3.15.
Basic build, boot, and PM test logs are available here:
http://www.pwsan.com/omap/testlogs/prcm-a-for-v3.15/
20140228124518/
Paul Bolle [Sun, 16 Feb 2014 18:51:37 +0000 (19:51 +0100)]
ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF
The Kconfig symbols OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF were added in
v2.6.36. They have never been used. Setting them has no effect. These
symbols can safely be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
[tony@atomide.com: updated to remove also the related mux.h entries]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Rajendra Nayak [Fri, 7 Feb 2014 10:21:26 +0000 (15:51 +0530)]
ARM: OMAP2+: AM43x: Use gptimer as clocksource
The SyncTimer in AM43x is clocked using the following two sources:
1) An inaccuarte 32k clock (CLK_32KHZ) derived from PER DPLL, causing system
time to go slowly (~10% deviation).
2) external 32KHz RTC clock, which may not always be available on board like
in the case of ePOS EVM
Use gptimer as clocksource instead, as is done in the case of AM335x
(which does not have a SyncTimer). With this, system time keeping works
accurately.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Afzal Mohammed [Fri, 7 Feb 2014 10:21:25 +0000 (15:51 +0530)]
ARM: OMAP2+: AM43x: determine features
Determine AM43x device features by reusing AM335x helper as feature
register layout is similar.
And also exporting AM43xx family name.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lokesh Vutla [Fri, 7 Feb 2014 10:21:24 +0000 (15:51 +0530)]
ARM: OMAP2+: AM43x: Add ID for ES1.1
Adding ID for AM437x ES1.1 silicon.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Afzal Mohammed [Fri, 7 Feb 2014 10:21:23 +0000 (15:51 +0530)]
ARM: OMAP2+: AM43x: enable in default config
Enable AM43x SoC in omap2plus_defconfig
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Nishanth Menon [Fri, 28 Feb 2014 19:43:47 +0000 (12:43 -0700)]
ARM: OMAP3+: DPLL: stop reparenting to same parent if already done
omap3_noncore_dpll_set_rate forces a reparent to the same clk_ref
for every call that takes place. This is an can be done only if a change
is detected.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tomi Valkeinen [Fri, 28 Feb 2014 19:43:46 +0000 (12:43 -0700)]
ARM: OMAP2+: clock: fix rate prints
Printing with unsigned long rates with %ld gives wrong result if the
rate is high enough. Fix this by using %lu.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Suman Anna [Fri, 28 Feb 2014 19:43:46 +0000 (12:43 -0700)]
ARM: AM43x: hwmod data: register spinlock OCP interface
AM43xx has a spinlock module which is identical to the
one present on AM33xx. Register the spinlock ocp_if link
so that the spinlock hwmod and associated omap_device can
be instantiated, and the runtime pm API could be used by
the OMAP hwspinlock driver.
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Dave Gerlach [Fri, 28 Feb 2014 19:43:46 +0000 (12:43 -0700)]
ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support
Since commit
65aa94b204d (ARM: OMAP4: clockdomain/CM code: Update supported
transition modes), on OMAP4, all CLKDMs support HW_AUTO so this is used
instead of SW_SLEEP for the idling of clockdomains. However, additional
SoCs now leverage the OMAP4 clockdomain code so update it to use SW_SLEEP
if the clockdomain data specifies that the CLKDM has the
CLKDM_CAN_FORCE_SLEEP flag set rather than using HW_AUTO for both cases.
Without this patch, clockdomain handling is broken on AM43xx and no
clockdomains are actually being put into idle on this platform. Any
attempt to idle them results in the HW_AUTO value (0x3) being written
to them with no apparent effect.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[paul@pwsan.com: added extra explanatory text from patch set intro]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Lokesh Vutla [Fri, 28 Feb 2014 19:43:45 +0000 (12:43 -0700)]
ARM: OMAP2+: AM43xx: implement support for machine restart
Add restart hook so that AM4372 builds can restart the platform.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Alexander Shiyan [Sun, 2 Feb 2014 08:09:01 +0000 (12:09 +0400)]
ARM: clps711x: Migrate CLPS711X subarch to the new irqchip driver
This patch remove old code and migrate Cirrus Logic CLPS711X subarch
to the new irqchip driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Alexander Shiyan [Sun, 2 Feb 2014 08:08:40 +0000 (12:08 +0400)]
ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driver
Add OF document for Cirrus Logic CLPS711X irqchip driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
Alexander Shiyan [Sun, 2 Feb 2014 08:07:46 +0000 (12:07 +0400)]
ARM: clps711x: Add CLPS711X irqchip driver
This adds the irqchip driver for Cirrus Logic CLPS711X series SoCs.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 25 Feb 2014 17:34:42 +0000 (18:34 +0100)]
Merge tag 'mvebu-soc-3xx-3.15' of git://git.infradead.org/linux-mvebu into next/soc
Merge "mvebu new SoCs for v3.15" from Jason Cooper:
- mvebu
- initial support for Armada 375, 380, and 385
Depends:
- tags/mvebu-soc-3.15 (resolves delete/rename hidden conflict)
* tag 'mvebu-soc-3xx-3.15' of git://git.infradead.org/linux-mvebu:
Documentation: arm: update Marvell documentation about Armada 375/38x
ARM: mvebu: add initial support for the Armada 380/385 SOCs
ARM: mvebu: add workaround for data abort issue on Armada 375
ARM: mvebu: add initial support for the Armada 375 SOCs
ARM: mvebu: add Armada 375 support to the system-controller driver
ARM: mvebu: make CPU_PJ4B selection a per-SoC choice
ARM: mvebu: rename DT machine structure for Armada 370/XP
ARM: mvebu: rename armada-370-xp.c to board-v7.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 25 Feb 2014 17:33:37 +0000 (18:33 +0100)]
Merge branch 'mvebu/soc' into next/soc
Merge dependency for mvebu-soc-3xx branch from cleanups.
* mvebu/soc:
ARM: mvebu: remove unneeded ->map_io field for Armada 370/XP
ARM: mvebu: make use of of_find_matching_node_and_match
ARM: mvebu: Makefile clean-up
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Mon, 24 Feb 2014 01:40:03 +0000 (17:40 -0800)]
Linux 3.14-rc4
Linus Torvalds [Mon, 24 Feb 2014 01:38:04 +0000 (17:38 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
Linus Torvalds [Mon, 24 Feb 2014 01:37:25 +0000 (17:37 -0800)]
Merge tag 'regulator-v3.14-rc4' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Mostly unexciting driver fixes, plus one fix to lower the severity of
the log message when we don't use an optional regulator - the fixes
for ACPI system made this come up more often and it was correctly
observed that it was causing undue concern for users"
* tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Fix invalid return value on DT parse success
regulator: core: Change dummy supplies error message to a warning
regulator: s5m8767: Add missing of_node_put
regulator: s5m8767: Use of_get_child_by_name
regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
Linus Torvalds [Sun, 23 Feb 2014 22:17:08 +0000 (14:17 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Serialize the registration of a new sched_clock in the currently ARM
only generic sched_clock facilty to avoid sched_clock havoc"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched_clock: Prevent callers from seeing half-updated data
Linus Torvalds [Sun, 23 Feb 2014 22:15:46 +0000 (14:15 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- a bugfix which prevents a divide by 0 panic when the newly introduced
try_msr_calibrate_tsc() fails
- enablement of the Baytrail platform to utilize the newfangled msr
based calibration
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: tsc: Add missing Baytrail frequency to the table
x86, tsc: Fallback to normal calibration if fast MSR calibration fails
Linus Torvalds [Sun, 23 Feb 2014 22:15:08 +0000 (14:15 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Another four fixlets to tame the ARM orion irq chip"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: orion: Fix getting generic chip pointer.
irqchip: orion: clear stale interrupts in irq_startup
irqchip: orion: use handle_edge_irq on bridge irqs
irqchip: orion: clear bridge cause register on init
Linus Torvalds [Sun, 23 Feb 2014 18:40:22 +0000 (10:40 -0800)]
Merge tag 'usb-3.14-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for reported issues for 3.14-rc4
The majority of these are for USB gadget, phy, and musb driver issues.
And there's a few new device ids thrown in for good measure"
* tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: need to mask when writting endptflush and endptprime
usb: musb: correct use of schedule_delayed_work()
usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
usb: gadget: fix NULL pointer dereference
usb: gadget: printer: using gadget_is_otg to check otg support at runtime
phy: let phy_provider_register be the last step in registering PHY
phy-core: Don't allow building phy-core as a module
phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller
phy-core: phy_get: Leave error logging to the caller
phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM
usb: musb: correct use of schedule_delayed_work()
usb: musb: do not sleep in atomic context
USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8
USB: EHCI: add delay during suspend to prevent erroneous wakeups
usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
usb: musb: do not sleep in atomic context
usb: gadget: s3c2410_udc: Fix build error
usb: musb: core: Fix remote-wakeup resume
usb: musb: host: Fix SuperSpeed hub enumeration
usb: musb: fix obex in g_nokia.ko causing kernel panic
Linus Torvalds [Sun, 23 Feb 2014 18:39:50 +0000 (10:39 -0800)]
Merge tag 'tty-3.14-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull TTY revert from Greg KH:
"Here is a single commit, a revert of a sysfs file change that ended up
breaking a userspace tool"
* tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: Set correct tty name in 'active' sysfs attribute"
Linus Torvalds [Sun, 23 Feb 2014 18:39:21 +0000 (10:39 -0800)]
Merge tag 'staging-3.14-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging tree fix from Greg KH:
"Here is a single android driver fix for 3.14-rc4 that fixes a reported
problem in the binder driver"
* tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: binder: Fix death notifications
Linus Torvalds [Sun, 23 Feb 2014 18:38:51 +0000 (10:38 -0800)]
Merge tag 'char-misc-3.14-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single commit, to fix a reported problem in the mei driver"
* tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: set client's read_cb to NULL when flow control fails
Matt Porter [Fri, 14 Feb 2014 15:15:03 +0000 (10:15 -0500)]
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
Add myself as an additional maintainer for the Broadcom mobile
SoCs.
Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Christian Daudt <bcm@fixthebug.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Mark Brown [Sun, 23 Feb 2014 03:22:18 +0000 (12:22 +0900)]
Merge remote-tracking branches 'regulator/fix/da9063', 'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus
Mark Brown [Sun, 23 Feb 2014 03:22:18 +0000 (12:22 +0900)]
Merge remote-tracking branch 'regulator/fix/core' into regulator-linus
Greg Kroah-Hartman [Sat, 22 Feb 2014 22:31:04 +0000 (14:31 -0800)]
Revert "tty: Set correct tty name in 'active' sysfs attribute"
This reverts commit
d8a5dc3033af2fd6d16030d2ee4fbd073460fe54.
This breaks plymouth installs, either because plymouth is using the file
"incorrectly" or because the patch is incorrect. Either way, this needs
to be reverted until it is all figured out.
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: Ray Strode <halfline@gmail.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Werner Fink <werner@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 22 Feb 2014 20:12:50 +0000 (12:12 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixlets: a fair number of them resulting from the new
SCHED_DEADLINE code"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Remove useless dl_nr_total
sched/deadline: Test for CPU's presence explicitly
sched: Add 'flags' argument to sched_{set,get}attr() syscalls
sched: Fix information leak in sys_sched_getattr()
sched,numa: add cond_resched to task_numa_work
sched/core: Make dl_b->lock IRQ safe
sched/core: Fix sched_rt_global_validate
sched/deadline: Fix overflow to handle period==0 and deadline!=0
sched/deadline: Fix bad accounting of nr_running
Linus Torvalds [Sat, 22 Feb 2014 20:11:54 +0000 (12:11 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixlets from all around the place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table
perf/x86: Correctly use FEATURE_PDCM
perf, nmi: Fix unknown NMI warning
perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches
perf trace: Add fallback definition of EFD_SEMAPHORE
perf list: Fix checking for supported events on older kernels
perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly
perf probe: Do not add offset twice to uprobe address
perf/x86: Fix Userspace RDPMC switch
perf/x86/intel/p6: Add userspace RDPMC quirk for PPro
Linus Torvalds [Sat, 22 Feb 2014 16:29:25 +0000 (08:29 -0800)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix writing the minimum temperature in max1668 driver"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Fix writing the minimum temperature
Linus Torvalds [Sat, 22 Feb 2014 16:26:01 +0000 (08:26 -0800)]
Merge branch 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs
Pull xfs fixes from Dave Chinner:
"This is the first pull request I've had to do for you, so I'm still
sorting things out. The reason I'm sending this and not Ben should be
obvious from the first commit below - SGI has stepped down from the
XFS maintainership role. As such, I'd like to take another
opportunity to thank them for their many years of effort maintaining
XFS and supporting the XFS community that they developed from the
ground up.
So I haven't had time to work things like signed tags into my
workflows yet, so this is just a repo branch I'm asking you to pull
from. And yes, I named the branch -rc4 because I wanted the fixes in
rc4, not because the branch was for merging into -rc3. Probably not
right, either.
Anyway, I should have everything sorted out by the time the next merge
window comes around. If there's anything that you don't like in the
pull req, feel free to flame me unmercifully.
The changes are fixes for recent regressions and important thinkos in
verification code:
- a log vector buffer alignment issue on ia32
- timestamps on truncate got mangled
- primary superblock CRC validation fixes and error message
sanitisation"
* 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: limit superblock corruption errors to actual corruption
xfs: skip verification on initial "guess" superblock read
MAINTAINERS: SGI no longer maintaining XFS
xfs: xfs_sb_read_verify() doesn't flag bad crcs on primary sb
xfs: ensure correct log item buffer alignment
xfs: ensure correct timestamp updates from truncate
Ingo Molnar [Sat, 22 Feb 2014 16:20:46 +0000 (17:20 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Handle PERF_RECORD_HEADER_EVENT_TYPE properly. (Jiri Olsa)
* Fix checking for supported events on older kernels in
'perf list' (Vince Weaver)
* Do not add offset twice to uprobe address in
'perf probe' (Masami Hiramatsu)
* Fix perf trace's ioctl 'request' beautifier build problems
on !(i386 || x86_64) arches (Arnaldo Carvalho de Melo)
* Fix 'perf trace' build by adding a fallback definition for
EFD_SEMAPHORE (Ben Hutchings)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Krzysztof Kozlowski [Fri, 21 Feb 2014 12:12:38 +0000 (13:12 +0100)]
regulator: max14577: Fix invalid return value on DT parse success
This fixes bug introduced in
667a6b7a (regulator: max14577: Add missing
of_node_put). The DTS parsing function returned number of matched
regulators as success status which then was compared against 0 in probe.
Result was a probe fail after successful parsing the DTS:
max14577-regulator: probe of max14577-regulator failed with error 2
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviwed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Thomas Petazzoni [Mon, 17 Feb 2014 14:23:31 +0000 (15:23 +0100)]
Documentation: arm: update Marvell documentation about Armada 375/38x
This commit updates the documentation that describes the various
families of SOCs produced by Marvell, together with the corresponding
available technical documents. It adds Armada 375 and Armada 38x, and
adds a link to the product brief for the already supported Armada 370.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Mon, 17 Feb 2014 14:23:27 +0000 (15:23 +0100)]
ARM: mvebu: add initial support for the Armada 380/385 SOCs
This commit adds the basic support for the Armada 380 and Armada 385
SOCs. These SoCs share most of their IP with the Armada 370/XP
SoCs. The main difference is the use of a Cortex A9 CPU instead of the
PJ4B CPU. The Armada 380 is a single core Cortex-A9, while the Armada
385 is a dual-core Cortex-A9.
The support is introduced in board-v7.c, together with Armada 370/XP,
but a separate DT structure is added, because Armada 38x will need a
different set of SMP operations when the SMP support is introduced.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Mon, 17 Feb 2014 14:23:24 +0000 (15:23 +0100)]
ARM: mvebu: add workaround for data abort issue on Armada 375
Early versions of Armada 375 SoC have a bug where the BootROM leaves
an external data abort pending. The kernel is hit by this data abort
as soon as it enters userspace, because it unmasks the data aborts at
this moment. We register a custom abort handler below to ignore the
first data abort to work around this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Mon, 17 Feb 2014 14:23:23 +0000 (15:23 +0100)]
ARM: mvebu: add initial support for the Armada 375 SOCs
This commit adds the basic support for the Armada 375 SOCs. These SoCs
share most of their IP with the Armada 370/XP SoCs. The main
difference is the use of a Cortex A9 CPU instead of the PJ4B CPU. The
interrupt controller and the L2 cache controller are also different
they are respectively the GIC and the PL310.
The support is introduced in board-v7.c, together with Armada 370/XP,
but a separate DT structure is added, because Armada 375 will need a
different set of SMP operations when the SMP support is introduced.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Mon, 17 Feb 2014 14:23:22 +0000 (15:23 +0100)]
ARM: mvebu: add Armada 375 support to the system-controller driver
The system controller block in the Armada 375 has different register
offsets for the system reset and other related functions. Therefore,
this commit introduces the new "armada-375-system-controller"
compatible string to identify the Armada 375 variant of the system
controller.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Mon, 17 Feb 2014 14:23:21 +0000 (15:23 +0100)]
ARM: mvebu: make CPU_PJ4B selection a per-SoC choice
Until now, the CPU_PJ4B Kconfig option was selected by
MACH_ARMADA_MVEBU, i.e for all Armada MVEBU SOCs. In preparation to
the introduction of Cortex-A9 based Armada MVEBU SOCs, this selection
is moved down to the Armada 370 and Armada XP specific options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Mon, 17 Feb 2014 14:23:20 +0000 (15:23 +0100)]
ARM: mvebu: rename DT machine structure for Armada 370/XP
Due to a mistake made when merging Armada 370 and Armada XP DT machine
structures, the name of the structure was incorrectly chosen as being
ARMADA_XP_DT, while the structure also covers Armada 370. Therefore,
we rename the structure to ARMADA_370_XP_DT.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Mon, 17 Feb 2014 14:23:19 +0000 (15:23 +0100)]
ARM: mvebu: rename armada-370-xp.c to board-v7.c
In preparation to the introduction of the support of Armada 375 and
Armada 38x, this commit renames arch/arm/mach-mvebu/armada-370-xp.c to
arch/arm/mach-mvebu/board-v7.c. The board-v7.c name as we expect this
file to ultimately contain the DT_MACHINE_START definitions for all
ARMv7 Marvell EBU platforms (370, 375, 38x, XP and Dove as of today).
In relation to this file rename, this commit also:
* Renames the hidden Kconfig symbol MACH_ARMADA_370_XP to
MACH_MVEBU_V7. This hidden symbol is selected by the various
per-SoC visible Kconfig options to trigger the build of board-v7.c.
* Renames a certain number of functions in board-v7.c so that their
armada_370_xp prefix is replaced by a mvebu prefix. The .dt_compat
array keeps its armada_370_xp prefix because the new SOCs will be
introduced with separate .dt_compat arrays, due to the need for
different SMP operations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Jason Cooper [Sat, 22 Feb 2014 00:34:01 +0000 (00:34 +0000)]
Merge tag 'tags/mvebu-soc-3.15' into mvebu/soc-3xx
mvebu soc changes for v3.15
- mvebu
- Makefile cleanup and remove map_io
- use of_find_matching_node_and_match
Thomas Gleixner [Fri, 21 Feb 2014 22:57:33 +0000 (23:57 +0100)]
Merge tag 'irqchip-mvebu-fixes-3.14' of git://git.infradead.org/linux-mvebu into irq/urgent
irqchip mvebu fixes for v3.14
- orion:
- fixes for clearing bridge cause register, and clearing stale interrupts
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds [Fri, 21 Feb 2014 22:35:05 +0000 (14:35 -0800)]
Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux
Pull devicetree fixes from Grant Likely:
"Device tree compatible match order bug fix
This branch contains a bug fix for the way devicetree code identifies
the type of device. Device drivers can contain a list of
of_device_ids, but it more than one entry will match, then the device
driver may choose the wrong one. Commit
105353145e, "match each node
compatible against all given matches first", was queued for v3.14 but
ended up causing other bugs. Commit
06b29e76a7 attempted to fix it
but it had other bugs. Merely reverting the fix and waiting until
v3.15 isn't a good option because there is code in v3.14 that depends
on the revised behaviour to boot.
This branch should finally fixes the problem correctly. This time
instead of just hoping that the patch is correct, this branch also
adds new testcases that validate the behaviour.
The changes in this branch are larger than I would like for a -rc
pull, but moving the test case data out of out of arch/arm so that it
could be validated on other architectures was important"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
of: Add self test for of_match_node()
of: Move testcase FDT data into drivers/of
of: reimplement the matching method for __of_match_node()
Revert "of: search the best compatible match first in __of_match_node()"
Linus Torvalds [Fri, 21 Feb 2014 22:34:26 +0000 (14:34 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fix from Wim Van Sebroeck:
"It corrects the error code when no device was found for w83697hf_wdt"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: w83697hf_wdt: return ENODEV if no device was found
Andrew Lunn [Thu, 6 Feb 2014 23:41:58 +0000 (00:41 +0100)]
irqchip: orion: Fix getting generic chip pointer.
Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt
handler. The bridge interrupt is implemented using a single generic
chip. Thus the parameter passed to irq_get_domain_generic_chip()
should always be zero.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Fixes: 9dbd90f17e4f ("irqchip: Add support for Marvell Orion SoCs")
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Stephane Eranian [Wed, 19 Feb 2014 13:10:18 +0000 (14:10 +0100)]
perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table
This patch updates the CBOX PMU filters mapping tables for SNB-EP
and IVT (model 45 and 62 respectively).
The NID umask always comes in addition to another umask.
When set, the NID filter is applied.
The current mapping tables were missing some code/umask
combinations to account for the NID umask. This patch
fixes that.
Cc: mingo@elte.hu
Cc: ak@linux.intel.com
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140219131018.GA24475@quad
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Peter Zijlstra [Mon, 3 Feb 2014 13:29:03 +0000 (14:29 +0100)]
perf/x86: Correctly use FEATURE_PDCM
The current code simply assumes Intel Arch PerfMon v2+ to have
the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check
CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead.
This was found by KVM which implements v2+ but didn't provide the
capabilities MSR. Change the code to DTRT; KVM will also implement the
MSR and return 0.
Cc: pbonzini@redhat.com
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Markus Metzger [Sat, 15 Feb 2014 00:44:08 +0000 (16:44 -0800)]
perf, nmi: Fix unknown NMI warning
When using BTS on Core i7-4*, I get the below kernel warning.
$ perf record -c 1 -e branches:u ls
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2.
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317920] Do you have a strange power saving mode enabled?
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317945] Dazed and confused, but trying to continue
Make intel_pmu_handle_irq() take the full exit path when returning early.
Cc: eranian@google.com
Cc: peterz@infradead.org
Cc: mingo@kernel.org
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Matthieu CASTET [Wed, 19 Feb 2014 05:46:31 +0000 (13:46 +0800)]
usb: chipidea: need to mask when writting endptflush and endptprime
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.
Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arve Hjønnevåg [Mon, 17 Feb 2014 21:58:29 +0000 (13:58 -0800)]
staging: binder: Fix death notifications
The change (
008fa749e0fe5b2fffd20b7fe4891bb80d072c6a) that moved the
node release code to a separate function broke death notifications in
some cases. When it encountered a reference without a death
notification request, it would skip looking at the remaining
references, and therefore fail to send death notifications for them.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: stable <stable@vger.kernel.org> # 3.10
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.050891 seconds and 5 git commands to generate.