bfd:
2011-12-08  Andrew Pinski  <apinski@cavium.com>
            Adam Nemet  <anemet@caviumnetworks.com>

* archures.c (bfd_mach_mips_octeon2): New macro
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsocteon2): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeon2.
* elfxx-mips.c (_bfd_elf_mips_mach): Support E_MIPS_MACH_OCTEON2.
(mips_set_isa_flags): Add bfd_mach_mips_octeon2.
(mips_mach_extensions): Add bfd_mach_mips_octeon2.

gas:
2011-12-08  Andrew Pinski  <apinski@cavium.com>
            Adam Nemet  <anemet@caviumnetworks.com>

        * tc-mips.c (CPU_IS_OCTEON): Add Octeon2.
        (mips_cpu_info_table): Add Octeon2.
        * doc/c-mips.texi: Document octeon2 as an acceptable value for -march=.

gas/testsuite:
2011-12-08  Andrew Pinski  <apinski@cavium.com>
            Adam Nemet  <anemet@caviumnetworks.com>

        * gas/mips/mips.exp: Add Octeon2 for an architecture.
        Run octeon2 test.
        * gas/mips/octeon2.d: New file.
        * gas/mips/octeon2.s: New file.

include/opcode:
2011-12-08  Andrew Pinski  <apinski@cavium.com>
            Adam Nemet  <anemet@caviumnetworks.com>

        * mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEON2.
        (INSN_OCTEON2): New macro.
        (CPU_OCTEON2): New macro.
        (OPCODE_IS_MEMBER): Add Octeon2.

opcodes:
2011-12-08  Andrew Pinski  <apinski@cavium.com>
            Adam Nemet  <anemet@caviumnetworks.com>

* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".

* mips-tdep.c (mips_skip_mips16_trampoline_code): Sign-extend
address chunks retrieved from decoded lui/addiu pairs.

* mips-tdep.c (extended_offset): Correct calculation.
(unpack_mips16): Correct bitfield positions used for extraction
of the immediate argument; fix sign-extension of same.
(extended_mips16_next_pc): Correct B instruction's offset
calculation.  Correct register decoding of the BEQZ and BNEZ
as well as jump-register instructions.  Handle compact jumps.

* objfiles.h (struct objfile): Remove obsolete comment.
* objfiles.c (build_objfile_section_table): Remove obsolete
comment.

* gdb.cp/ovsrch.exp (test_class): Correctly use "a_param" in
condition.

gdb/gdbserver/
* linux-low.c (linux_kill): Skip PTRACE_KILL if LWP does not exist.
Print new debug message for such case.

* MAINTAINERS (Responsible Maintainers): Add Yao Qi as
maintainer of the tic6x target.

*** empty log message ***

daily update

Fix ChangeLog typo.

* gdb.trace/tfind.exp: Update for output changes.

* arm-tdep.h (arm_deal_with_atomic_sequence): Add prototype.
* arm-tdep.c (thumb_deal_with_atomic_sequence_raw): New function.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_software_single_step): Call it.
* arm-linux-tdep.c (arm_linux_software_single_step): Likewise.

2011-12-07  Sameera Deshpande  <sameera.deshpande@arm.com>

* gas/config/tc-arm.c (do_t_ldstd): Warn for unpredictable cases.
* gas/testsuite/gas/arm/thumb2_ldstd_unpredictable.d: New testcase.
* gas/testsuite/gas/arm/thumb2_ldstd_unpredictable.l: Likewise.
* gas/testsuite/gas/arm/thumb2_ldstd_unpredictable.s: Likewise.
* gas/testsuite/gas/testsuite/gas/arm/sp-pc-validations-bad-t.l: Update
testcase.
* gas/testsuite/gas/testsuite/gas/arm/sp-pc-validations-bad-t.s: Likewise.

* gas/config/tc-arm.c (ARM_IT_MAX_OPERANDS): New define.
(arm_it): Use ARM_IT_MAX_OPERANDS.
(neon_select_shape): Ensure we have matched all operands.
* gas/testsuite/gas/arm/neon-suffix-bad.l: Add testcase.
* gas/testsuite/gas/arm/neon-suffix-bad.s: Likewise.

* gas/config/tc-arm.c (parse_neon_mov): Update which_operand
correctly.

2011-12-07  Pedro Alves  <pedro@codesourcery.com>

* gdb.ada/catch_ex.exp: Skip as unsupported if "catch exception"
throws "Cannot insert catchpoints in this configuration".
* gdb.ada/mi_catch_ex.exp: Likewise.

* s390-tdep.c: Replace "Linux" by "GNU/Linux" in comments
where appropriate.
* s390-tdep.h: Likewise.

PR ld/12772
* elflink.c (elf_gc_sweep_symbol): Discard unmarked symbols
defined in shared libraries.

2011-12-07  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_canonicalize_symtab): Fix indentation.
Adjust the condition.
(bfd_mach_o_read_symtab_symbol): Now returns a bfd_boolean.
Adjust return statements.
(bfd_mach_o_read_symtab_strtab): Likewise.
(bfd_mach_o_read_symtab_symbols): Likewise.
(bfd_mach_o_scan_start_address): Likewise.  Make it static.
(bfd_mach_o_scan): Likewise.
(bfd_mach_o_read_dysymtab_symbol): Remove unused function.
(bfd_mach_o_header_p): Adjust call.
(bfd_mach_o_cpu_name): Make it const.
(bfd_mach_o_filetype_name): Likewise.
(bfd_mach_o_header_flags_name): Likewise.
(bfd_mach_o_section_type_name): Likewise.
(bfd_mach_o_section_attribute_name): Likewise.
(bfd_mach_o_load_command_name): Likewise.
(bfd_mach_o_get_section_type_from_name): Add a const qualifier
after above change.
(bfd_mach_o_get_section_attribute_from_name): Likewise.
* mach-o.h (bfd_mach_o_read_dysymtab_symbol)
(bfd_mach_o_scan_start_address, bfd_mach_o_scan): Remove.

2011-12-07  Tristan Gingold  <gingold@adacore.com>

* machoread.c (macho_symtab_read): Do not consider N_OPT as
a debugging stab.  Improve complaint message.

2011-12-06 David Daney <david.daney@cavium.com>

* readelf.c (dynamic_section_mips_val): Factor out trailing '\n'
from printed strings and move it to the end of the function.
Use BFD_VMA_FMT for printf format specifier for dynamic tag value.
Use print_vma() to print dynamic tag values.

* mips-tdep.c (mips32_scan_prologue): Only update the immediate
load adjustment if still within the prologue.

*** empty log message ***

* mips-tdep.c (mips32_next_pc): Fix floating point condition
code mask.

* mips-tdep.c (deal_with_atomic_sequence): Fix the handling
of BLTZ* and BGEZ* instructions.

gdb/gdbserver/
Fix overlapping memcpy.
* mem-break.c (set_raw_breakpoint_at): New variable buf.  Use it for
the read_inferior_memory transfer.
(delete_fast_tracepoint_jump): New variable buf.  Use it for the
write_inferior_memory transfer.
(set_fast_tracepoint_jump): New variable buf.  Use it for the
read_inferior_memory and write_inferior_memory transfers.
(uninsert_fast_tracepoint_jumps_at, reinsert_fast_tracepoint_jumps_at)
(delete_raw_breakpoint, uninsert_raw_breakpoint): New variable buf.
Use it for the write_inferior_memory transfer.
(check_mem_read, check_mem_write): New gdb_asserts for overlapping
buffers.

* mips-tdep.c (mips_pc_is_mips16): Reverse the order of checks
performed to determine whether an address refers to standard
MIPS or MIPS16 code.
(mips16_next_pc): Use mips_pc_is_mips16 instead of
is_mips16_addr.

* linux-low.c (fetch_register, store_register): Make code
consistent, fix formatting.

* linux-low.c (usr_store_inferior_registers): Factor out code
to handle individual registers into...
(store_register): ... this new function.

daily update

2011-12-06  Pedro Alves  <pedro@codesourcery.com>

gdb/
* breakpoint.c (breakpoint_restore_shadows): Rename to ...
(breakpoint_xfer_memory): ... this.  Change prototype.  Handle
memory writes too.
* breakpoint.h (breakpoint_restore_shadows): Delete.
(breakpoint_xfer_memory): Declare.
* mem-break.c (default_memory_insert_breakpoint)
(default_memory_remove_breakpoint): Use target_write_raw_memory.
(memory_xfer_partial): Rename to ...
(memory_xfer_partial_1): ... this.  Don't mask out breakpoints
here.
(memory_xfer_partial): New.
(target_write_raw_memory): New.
* target.h (target_write_raw_memory): New.

gdb/testsuite/
* gdb.base/break-always.exp: Test changing memory at addresses
with breakpoints inserted.

* linespec.c (decode_dollar): Avoid "may be used uninitialized" warning.

the "ambiguous linespec" series
gdb
2011-12-06  Joel Brobecker  <brobecker@acacore.com>

        * language.h (struct language_defn): Add new component
        la_symbol_name_compare.
        * symfile.h (struct quick_symbol_functions): Update the profile
        of parameter "name_matcher" for the expand_symtabs_matching
        method.  Update the documentation accordingly.
        * ada-lang.h (ada_name_for_lookup): Add declaration.
        * ada-lang.c (ada_name_for_lookup): New function, extracted out
        from ada_iterate_over_symbols.
        (ada_iterate_over_symbols): Do not encode symbol name anymore.
        (ada_expand_partial_symbol_name): Adjust profile.
        (ada_language_defn): Add value for la_symbol_name_compare field.
        * linespec.c: #include "ada-lang.h".
        (iterate_name_matcher): Add language parameter. Replace call
        to strcmp_iw by call to language->la_symbol_name_compare.
        (decode_variable): Encode COPY if current language is Ada.
        * dwarf2read.c (dw2_expand_symtabs_matching): Adjust profile
        of name_matcher parameter.  Adjust call to name_matcher.
        * psymtab.c (expand_symtabs_matching_via_partial): Likewise.
        (expand_partial_symbol_names): Update profile of parameter "fun".
        * psymtab.h (expand_partial_symbol_names): Update profile of
        parameter "fun".
        * symtab.c (demangle_for_lookup): Update function documentation.
        (search_symbols_name_matches): Add language parameter.
        (expand_partial_symbol_name): Likewise.
        * c-lang.c (c_language_defn, cplus_language_defn)
        (asm_language_defn, minimal_language_defn): Add value for
        la_symbol_name_compare field.
        * d-lang.c (d_language_defn): Likewise.
        * f-lang.c (f_language_defn): Ditto.
        * jv-lang.c (java_language_defn): Ditto.
        * m2-lang.c (m2_language_defn): Ditto.
        * objc-lang.c (objc_language_defn): Ditto.
        * opencl-lang.c (opencl_language_defn): Ditto.
        * p-lang.c (pascal_language_defn): Ditto.
        * language.c (unknown_language_defn, auto_language_defn)
        (local_language_defn): Ditto.

2011-12-06  Tom Tromey  <tromey@redhat.com>

* linespec.c (iterate_over_all_matching_symtabs): Use
LA_ITERATE_OVER_SYMBOLS.
(lookup_prefix_sym, add_matching_symbols_to_info): Likewise.
(find_function_symbols, decode_variable): Remove Ada special
case.
* language.h (struct language_defn) <la_iterate_over_symbols>: New
field.
(LA_ITERATE_OVER_SYMBOLS): New macro.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* d-lang.c (d_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* p-lang.c (pascal_language_defn): Update.
* ada-lang.c (ada_iterate_over_symbols): New function.
(ada_language_defn): Update.

2011-12-06  Tom Tromey  <tromey@redhat.com>
    Joel Brobecker  <brobecker@acacore.com>

PR breakpoints/13105, PR objc/8341, PR objc/8343, PR objc/8366,
PR objc/8535, PR breakpoints/11657, PR breakpoints/11970,
PR breakpoints/12023, PR breakpoints/12334, PR breakpoints/12856,
PR shlibs/8929, PR shlibs/7393:
* python/py-type.c (compare_maybe_null_strings): Rename from
compare_strings.
(check_types_equal): Update.
* utils.c (compare_strings): New function.
* tui/tui-winsource.c (tui_update_breakpoint_info): Update for
location changes.
* tracepoint.c (scope_info): Update.
(trace_find_line_command): Use DECODE_LINE_FUNFIRSTLINE.
* symtab.h (iterate_over_minimal_symbols)
(iterate_over_some_symtabs, iterate_over_symtabs)
(find_pcs_for_symtab_line, iterate_over_symbols)
(demangle_for_lookup): Declare.
(expand_line_sal): Remove.
* symtab.c (iterate_over_some_symtabs, iterate_over_symtabs)
(lookup_symtab_callback): New functions.
(lookup_symtab): Rewrite.
(demangle_for_lookup): New function, extract from
lookup_symbol_in_language.
(lookup_symbol_in_language): Use it.
(iterate_over_symbols): New function.
(find_line_symtab): Update.
(find_pcs_for_symtab_line): New functions.
(find_line_common): Add 'start' argument.
(decode_line_spec): Update.  Change argument to 'flags', change
interpretation.
(append_expanded_sal): Remove.
(append_exact_match_to_sals): Remove.
(expand_line_sal): Remove.
* symfile.h (struct quick_symbol_functions) <lookup_symtab>:
Remove.
<map_symtabs_matching_filename>: New field.
* stack.c (func_command): Only look in the current program space.
Use DECODE_LINE_FUNFIRSTLINE.
* source.c (line_info): Set pspace on sal.  Check program space in
the loop.  Use DECODE_LINE_LIST_MODE.
(select_source_symtab): Use DECODE_LINE_FUNFIRSTLINE.
* solib-target.c: Remove DEF_VEC_I(CORE_ADDR).
* python/python.c (gdbpy_decode_line): Update.
* psymtab.c (partial_map_expand_apply): New function.
(partial_map_symtabs_matching_filename): Rename from
lookup_partial_symbol.  Update arguments.
(lookup_symtab_via_partial_symtab): Remove.
(psym_functions): Update.
* objc-lang.h (parse_selector, parse_method): Don't declare.
(find_imps): Update.
* objc-lang.c (parse_selector, parse_method): Now static.
(find_methods): Change arguments.  Fill in a vector of symbol
names.
(uniquify_strings): New function.
(find_imps): Change arguments.
* minsyms.c (iterate_over_minimal_symbols): New function.
* linespec.h (enum decode_line_flags): New.
(struct linespec_sals): New.
(struct linespec_result) <canonical>: Remove.
<pre_expanded, addr_string, sals>: New fields.
(destroy_linespec_result, make_cleanup_destroy_linespec_result)
(decode_line_full): Declare.
(decode_line_1): Update.
* linespec.c (struct address_entry, struct linespec_state, struct
collect_info): New types.
(add_sal_to_sals_basic, add_sal_to_sals, hash_address_entry)
(eq_address_entry, maybe_add_address): New functions.
(total_number_of_methods): Remove.
(iterate_name_matcher, iterate_over_all_matching_symtabs): New
functions.
(find_methods): Change arguments.  Don't canonicalize input.
Simplify logic.
(add_matching_methods, add_constructors)
(build_canonical_line_spec): Remove.
(filter_results, convert_results_to_lsals): New functions.
(decode_line_2): Change arguments.  Rewrite for new data
structures.
(decode_line_internal): Rename from decode_line_1.  Change
arguments.  Add cleanups.  Update for new data structures.
(linespec_state_constructor, linespec_state_destructor)
(decode_line_full, decode_line_1): New functions.
(decode_indirect): Change arguments.  Update.
(locate_first_half): Use skip_spaces.
(decode_objc): Change arguments.  Update for new data structures.
Simplify logic.
(decode_compound): Change arguments.  Add cleanups.  Remove
fallback code, replace with error.
(struct decode_compound_collector): New type.
(collect_one_symbol): New function.
(lookup_prefix_sym): Change arguments.  Update.
(compare_symbol_name, add_all_symbol_names_from_pspace)
(find_superclass_methods ): New functions.
(find_method): Rewrite.
(struct symtab_collector): New type.
(add_symtabs_to_list, collect_symtabs_from_filename): New
functions.
(symtabs_from_filename): Change API.  Rename from
symtab_from_filename.
(collect_function_symbols): New function.
(find_function_symbols): Change API.  Rename from
find_function_symbol.  Rewrite.
(decode_all_digits): Change arguments.  Rewrite.
(decode_dollar): Change arguments.  Use decode_variable.
(decode_label): Change arguments.  Rewrite.
(collect_symbols): New function.
(minsym_found): Change arguments.  Rewrite.
(check_minsym, search_minsyms_for_name)
(add_matching_symbols_to_info): New function.
(decode_variable): Change arguments.  Iterate over all symbols.
(symbol_found): Remove.
(symbol_to_sal): New function.
(init_linespec_result, destroy_linespec_result)
(cleanup_linespec_result, make_cleanup_destroy_linespec_result):
New functions.
(decode_digits_list_mode, decode_digits_ordinary): New functions.
* dwarf2read.c (dw2_map_expand_apply): New function.
(dw2_map_symtabs_matching_filename): Rename from
dw2_lookup_symtab.  Change arguments.
(dwarf2_gdb_index_functions): Update.
* dwarf2loc.c: Remove DEF_VEC_I(CORE_ADDR).
* defs.h (compare_strings): Declare.
* cli/cli-cmds.c (compare_strings): Move to utils.c.
(edit_command, list_command): Use DECODE_LINE_LIST_MODE.  Call
filter_sals.
(compare_symtabs, filter_sals): New functions.
* breakpoint.h (struct bp_location) <line_number, source_file>:
New fields.
(struct breakpoint) <line_number, source_file>: Remove.
<filter>: New field.
* breakpoint.c (print_breakpoint_location, init_raw_breakpoint)
(momentary_breakpoint_from_master, add_location_to_breakpoint):
Update for changes to locations.
(init_breakpoint_sal): Add 'filter' argument.  Set 'filter' on
breakpoint.
(create_breakpoint_sal): Add 'filter' argument.
(remove_sal, expand_line_sal_maybe): Remove.
(create_breakpoints_sal): Remove 'sals' argument.  Handle
pre-expanded sals and the filter.
(parse_breakpoint_sals): Use decode_line_full.
(check_fast_tracepoint_sals): Use get_sal_arch.
(create_breakpoint): Create a linespec_sals.  Update.
(break_range_command): Use decode_line_full.  Update.
(until_break_command): Update.
(clear_command): Update match conditions for linespec.c changes.
Use DECODE_LINE_LIST_MODE.
(say_where): Update for changes to locations.
(bp_location_dtor): Free 'source_file'.
(base_breakpoint_dtor): Free 'filter'.  Don't free 'source_file'.
(update_static_tracepoint): Update for changes to locations.
(update_breakpoint_locations): Disable ranged breakpoint if too
many locations match.  Update.
(addr_string_to_sals): Use decode_line_full.  Resolve all sal
PCs.
(breakpoint_re_set_default): Don't call expand_line_sal_maybe.
(decode_line_spec_1): Update.  Change argument name to 'flags',
change interpretation.
* block.h (block_containing_function): Declare.
* block.c (block_containing_function): New function.
* skip.c (skip_function_command): Update.
(skip_re_set): Update.
* infcmd.c (jump_command): Use DECODE_LINE_FUNFIRSTLINE.
* mi/mi-main.c (mi_cmd_trace_find): Use DECODE_LINE_FUNFIRSTLINE.
* NEWS: Add entry.

2011-12-06  Tom Tromey  <tromey@redhat.com>

* elfread.c (elf_gnu_ifunc_resolver_return_stop): Allow
breakpoint's pspace to be NULL.
* breakpoint.h (struct breakpoint) <pspace>: Update comment.
* breakpoint.c (init_raw_breakpoint): Conditionally set
breakpoint's pspace.
(init_breakpoint_sal): Don't set breakpoint's pspace.
(prepare_re_set_context): Conditionally switch program space.
(addr_string_to_sals): Check executing_startup on location's
program space.

2011-12-06  Tom Tromey  <tromey@redhat.com>

* breakpoint.h (enum enable_state) <bp_startup_disabled>: Remove.
* breakpoint.c (should_be_inserted): Explicitly check if program
space is executing startup.
(describe_other_breakpoints): Update.
(disable_breakpoints_before_startup): Change executing_startup
earlier.  Remove loop.
(enable_breakpoints_after_startup): Likewise.
(init_breakpoint_sal): Don't use bp_startup_disabled.
(create_breakpoint): Don't use bp_startup_disabled.
(update_global_location_list): Use should_be_inserted.
(bkpt_re_set): Update.
gdb/testsuite
2011-12-06  Joel Brobecker  <brobecker@acacore.com>

        * gdb.ada/fullname_bp.exp: Add tests for other valid linespecs
        involving a fully qualified function name.

2011-12-06  Tom Tromey  <tromey@redhat.com>

* gdb.ada/homonym.exp: Add three breakpoint tests.

2011-12-06  Tom Tromey  <tromey@redhat.com>

* gdb.base/solib-weak.exp (do_test): Remove kfail.
* gdb.trace/tracecmd.exp: Disable pending breakpoints earlier.
* gdb.objc/objcdecode.exp: Update for output changes.
* gdb.linespec/linespec.exp: New file.
* gdb.linespec/lspec.cc: New file.
* gdb.linespec/lspec.h: New file.
* gdb.linespec/body.h: New file.
* gdb.linespec/base/two/thefile.cc: New file.
* gdb.linespec/base/one/thefile.cc: New file.
* gdb.linespec/Makefile.in: New file.
* gdb.cp/templates.exp (test_template_breakpoints): Update for
output changes.
* gdb.cp/re-set-overloaded.exp: Remove kfail.
* gdb.cp/ovldbreak.exp: Update for output changes.  "all" test now
makes one breakpoint.
* gdb.cp/method2.exp (test_break): Update for output changes.
* gdb.cp/mb-templates.exp: Update for output changes.
* gdb.cp/mb-inline.exp: Update for output changes.
* gdb.cp/mb-ctor.exp: Update for output changes.
* gdb.cp/ovsrch.exp: Use fully-qualified names.
* gdb.base/solib-symbol.exp: Run to main later.  Breakpoint now
has multiple matches.
* gdb.base/sepdebug.exp: Disable pending breakpoints.  Update for
error message change.
* gdb.base/list.exp (test_list_filename_and_number): Update for
error message change.
* gdb.base/break.exp: Disable pending breakpoints.  Update for
output changes.
* configure.ac: Add gdb.linespec.
* configure: Rebuild.
* Makefile.in (ALL_SUBDIRS): Add gdb.linespec.
gdb/doc
2011-12-06  Tom Tromey  <tromey@redhat.com>

* gdb.texinfo (Set Breaks): Update for new behavior.

* python/lib/gdb/command/pretty_printers.py
(InfoPrettyPrinter.invoke1): Remove extra double quote.

* NEWS: Add MI news.

ChangeLog:

* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.

(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.

(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.

* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description.  Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.

* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.

* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.

* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.

* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.

* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.

gdbserver/ChangeLog:

* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.

* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.

testsuite/ChangeLog:

* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.

include/elf/ChangeLog:

* common.h (NT_S390_LAST_BREAK): Define.
(NT_S390_SYSTEM_CALL): Likewise.

bfd/ChangeLog:

* elf-bfd.h (elfcore_write_s390_last_break): Add prototype.
(elfcore_write_s390_system_call): Likewise.
* elf.c (elfcore_write_s390_last_break): New function.
(elfcore_write_s390_system_call): Likewise.
(elfcore_write_register_note): Call them.
(elfcore_grok_s390_last_break): New function.
(elfcore_grok_s390_system_call): Likewise.
(elfcore_grok_note): Call them.

fix incorrect assumption in gdb.ada/watch_arg

The testcase is assuming that the parameter being watched isn't being
modified. But the way the test program is written, this is not true
at all.  So this changes fixes the code to still reference the variable,
but in a way that does not modify its value.

gdb/testsuite:

        * gdb.ada/watch_arg/pck.ads, gdb.ada/watch_arg/pck.adb: New files.
        * gdb.ada/watch_arg/watch.adb: Adjust code to avoid modification
        of parameter X in procedure Foo.

*** empty log message ***

* gdb.trace/tfind.exp: Update help string matches.

daily update

2011-12-05  Pedro Alves  <pedro@codesourcery.com>

* linux-nat.c (resume_stopped_resumed_lwps): Call
registers_changed.

gdb/testsuite/
* gdb.server/ext-run.exp (get process list): Accept also systemd
as PID 1.

* ld-cris/weakref4.d: Updated pattern match for the message from
readelf stating that there are no decoded unwind sections.
* tls-js1.d: Likewise.
* tls-local-63.d: Likewise.
* tls-local-64.d: Likewise.
* tls-und-38.d: Likewise.
* tls-und-42.d: Likewise.
* tls-und-46.d: Likewise.
* tls-und-50.d: Likewise.
* weakref3.d: Likewise.
* weakref4.d: Likewise.

* breakpoint.c: Include record.h.
(breakpoints_always_inserted_mode): Return false when the record
target is in use.

* tc-arm.c (aeabi_set_public_attributes): Correctly set
Tag_ARM_ISA_use and Tag_Thumb_ISA_use.

* gas/arm/attr-any-armv4t.d: New test.
* gas/arm/attr-any-armv4t.s: New file.
* gas/arm/attr-any-thumbv6.d: New test.
* gas/arm/attr-any-thumbv6.s: New file.

* gas/config/tc-arm.c (arm_cpu_option_table): Add name_len field.
(arm_arch_option_table): Likewise.
(arm_option_extension_value_table): Likewise.
(ARM_CPU_OPT): New define.
(ARM_ARCH_OPT): Likewise.
(ARM_EXT_OPT): Likewise.
(arm_cpus): Use ARM_CPU_OPT to initialize.
(arm_archs): Use ARM_ARCH_OPT to initialize.
(arm_extensions): Use ARM_EXT_OPT to initialize.
(arm_parse_extension): Ensure option string matching matches
the whole string.
(arm_parse_cpu): Likewise.
(arm_parse_arch): Likewise.
* gas/testsuite/gas/arm/cmdline-bad-arch.d: New test case.
* gas/testsuite/gas/arm/cmdline-bad-cpu.d: Likewise.

2011-12-05  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_read_symtab_symbol): Accept indirect symbols.

Not 2012 yet...

2012-12-05  Pedro Alves  <pedro@codesourcery.com>

* amd64-linux-nat.c (amd64_linux_dr_get): Remove FIXME comment.
Reinstate perror_with_name call on ptrace error.  Remove #if 0.
* i386-linux-nat.c (i386_linux_dr_get): Likewise.
* i386bsd-nat.c (i386bsd_dr_get_status): Likewise.

2011-12-05  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_write_contents): Handle LC_LOAD_UPWARD_DYLIB.
(bfd_mach_o_read_dylib): Likewise.
(bfd_mach_o_read_command): Likewise.
(bfd_mach_o_bfd_print_private_bfd_data): Likewise.

2011-12-05  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_read_command): Add the bfd in the error
message.
(bfd_mach_o_openr_next_archived_file): Use arch name as member name.
(bfd_mach_o_fat_extract): Ditto.

* breakpoint.c (init_breakpoint_sal): Remove nested definitions of
  `i'(-Wshadow).

* bcache.c (bcache): Rename `bcache' to `cache'(-Wshadow).

* amd64-tdep.c (amd64_push_dummy_call): Remove nested definition
  of `tdep'(-Wshadow).

*** empty log message ***

daily update

*** empty log message ***

daily update

gdb/testsuite/
* gdb.base/break-entry.exp: Move the target use_gdb_stub test before
starting GDB.
* gdb.base/default.exp: Replace target use_gdb_stub checks by global
$use_gdb_stub.
* gdb.base/display.exp: Likewise.
* gdb.base/ending-run.exp: Likewise.
* gdb.base/list.exp (test_listsize): Likewise.
* gdb.base/setshow.exp: Likewise.
* gdb.base/valgrind-db-attach.exp: Set global use_gdb_stub to 1.
* lib/gdb.exp (gdb_run_cmd, gdb_start_cmd): Replace target use_gdb_stub
check by global $use_gdb_stub.
(gdb_test_multiple): Forbid run, start or attach for !$use_gdb_stub.
(default_gdb_start): Set global use_gdb_stub from target use_gdb_stub.
(default_gdb_init): Unset global $use_gdb_stub.
(gdb_continue_to_end, rerun_to_main): Replace target use_gdb_stub check
by global $use_gdb_stub.
* lib/gdbserver-support.exp: Extend comments for set_board_info
gdb_protocol and gdb,socketport.
(gdbserver_start_extended): Set global gdbserver_protocol and
gdbserver_gdbport.  Clear global use_gdb_stub.
* lib/mi-support.exp (default_mi_gdb_start): Set global use_gdb_stub
from target use_gdb_stub.
(mi_run_cmd): Replace target use_gdb_stub check by global $use_gdb_stub.

sim: bfin: lookup target strings when tracing system calls

Parsing target addresses is hard if not generally useless, so use the new
cb_get_string function to lookup the associated strings as well.  Now the
trace output is quickly useful instead of just marginally so.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: export cb_get_string for people to use

The common sim code provides a useful "get_string" function which reads
a C string out of the target's memory space.  So rename and export it
for other people to use.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

gdb/
Fix compilation --without-expat.
* solib-svr4.c (svr4_free_so, svr4_free_library_list): Move them here
from ...
[HAVE_LIBEXPAT] (svr4_free_so, svr4_free_library_list): ... here.

sim: generate build dependencies on the fly

Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim.  Now people shouldn't have to manually maintain
these in their Makefile's.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

* lib/gdb.exp (gdb_run_cmd, gdb_start_cmd, run_to_main): Add comments.
(gdb_step_for_stub): Add comments.

2011-12-03 David Daney <david.daney@cavium.com>

* ld-bootstrap/bootstrap.exp: Use consistent flags for final link
in ia64 and mips cases.

gas/testsuite/
* gas/mips/mips.exp (run_dump_test_arch): Add an opts parameter.
(run_dump_test_arches): Allow additional options to be passed.
(run_list_test_arch): Add opts to the name.
(run_list_test_arches): Allow the options to be elided.
(mips4-fp, mips5-fp): Run twice, one with -32 and once with -mabi=o64.
(mips64r2-ill, octeon-ill): Remove empty options string.

PR ld/13468
* elflink.c (bfd_elf_final_link): Don't segfault when checking
for DT_TEXTREL and .dynamic does not exist.

PR ld/13470
* elf32-ppc.c (ppc_elf_copy_indirect_symbol): Revert substantive
change in 2011-07-01 commit.  Comment.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Likewise.

*** empty log message ***

* lib/gdb.exp (gdb_expect): Pass all the exception conditions up
to the caller.
(gdb_test_multiple): Likewise.

daily update

gdb/testsuite/
Fix gdb.mi/mi-solib.exp without system debug info installed.
* lib/mi-support.exp (mi_expect_stop): Accept FILE also for `from'
expect attribute, return 0 for it.  Update comments.

gdb/
* Makefile.in (XMLFILES): Add library-list-svr4.dtd.
* features/library-list-svr4.dtd: New file.
* remote.c (PACKET_qXfer_libraries_svr4): New.
(remote_protocol_features): new entry for PACKET_qXfer_libraries_svr4.
(remote_xfer_partial): Handle TARGET_OBJECT_LIBRARIES_SVR4.
* solib-svr4.c (struct svr4_library_list): New.
[HAVE_LIBEXPAT]: Include xml-support.h.
[HAVE_LIBEXPAT] (svr4_library_list_start_library)
[HAVE_LIBEXPAT] (svr4_library_list_start_list, svr4_library_attributes)
[HAVE_LIBEXPAT] (svr4_library_list_children)
[HAVE_LIBEXPAT] (svr4_library_list_attributes)
[HAVE_LIBEXPAT] (svr4_library_list_elements, svr4_parse_libraries)
[HAVE_LIBEXPAT] (svr4_current_sos_via_xfer_libraries)
[!HAVE_LIBEXPAT] (svr4_current_sos_via_xfer_libraries): New.
(svr4_read_so_list): Extend the corruption message by addresses.
(svr4_current_sos): New variable library_list, call
svr4_current_sos_via_xfer_libraries.
* target.h (enum target_object): New TARGET_OBJECT_LIBRARIES_SVR4.

gdb/gdbserver/
* linux-low.c (get_phdr_phnum_from_proc_auxv, get_dynamic, get_r_debug)
(read_one_ptr, struct link_map_offsets, linux_qxfer_libraries_svr4):
New.
(struct linux_target_ops): Install linux_qxfer_libraries_svr4.
* linux-low.h (struct process_info_private): New member r_debug.
* server.c (handle_qxfer_libraries): Call
the_target->qxfer_libraries_svr4.
(handle_qxfer_libraries_svr4): New function.
(qxfer_packets): New entry "libraries-svr4".
(handle_query): Check QXFER_LIBRARIES_SVR4 and report libraries-svr4.
* target.h (struct target_ops): New member qxfer_libraries_svr4.
* remote.c (remote_xfer_partial): Call add_packet_config_cmd for
PACKET_qXfer_libraries_svr4.

gdb/doc/
* gdb.texinfo (Requirements, Remote Protocol): Reference also `Library
List Format for SVR4 Targets'.
(General Query Packets): New item qXfer:libraries-svr4:read.
(Library List Format for SVR4 Targets): New node.

gdb/testsuite/
* gdb.base/solib-corrupted.exp: Suppress test on is_remote target.
(corrupted list): Adjust the expectation.

* readelf.c (ia64_process_unwind): Turn into a void funtion.
(hppa_process_unwind): Likewise.
(arm_process_unwind): Likewise.
(process_unwind): Likewise.
(arm_get_section_word): Rename to get_unwind_section_word.
Add sym_name parameter to return the offset into the string table
of the symbol associated with the reloc applied to the word.
(decode_tic6x_unwind_regmask): Add NULL argument to invocation of
get_unwind_section_word.
(dump_arm_unwind): Likewise.
(decode_arm_unwind_bytecode): Prepend a comma when *not* the first
register in a list.
(decode_arm_unwind): If the returned function address is 0 and a
valid symname offset is provided use that to compute the name
associated with the entry.
Add extra checks of the compact model index entry.

gdb/
PR threads/13448
* dwarf2read.c (decode_locdesc): Handle DW_OP_const8u.
For DW_OP_GNU_push_tls_address increment the value, new comment for it.

gdb/testsuite/
PR threads/13448
* gdb.dwarf2/dw2-var-zero-addr.S: New file.
* gdb.dwarf2/dw2-var-zero-addr.exp: New file.
* gdb.threads/tls-var-main.c: New file.
* gdb.threads/tls-var.c: New file.
* gdb.threads/tls-var.exp: New file.

gdb/testsuite/
PR testsuite/12649
* gdb.trace/collection.exp (gdb_collect_return_test): Import gdb_prompt.
Protect gdb_test_multiple by final $gdb_prompt match.
* gdb.trace/tspeed.exp (gdb_fast_trace_speed_test): Likewise.
* gdb.trace/tstatus.exp (run_trace_experiment): Likewise.
(test_tracepoints): Likewise.

gdb/
PR breakpoints/13346
* dwarf2read.c (process_psymtab_comp_unit): Set
PSYMTABS_ADDRMAP_SUPPORTED.
* psympriv.h (struct partial_symtab): Comment textlow and texthigh
validity.  New field psymtabs_addrmap_supported.
* psymtab.c (find_pc_sect_psymtab_closer): New gdb_assert on
psymtabs_addrmap_supported.
(find_pc_sect_psymtab): Do not fallback to TEXTLOW and TEXTHIGH for
!PSYMTABS_ADDRMAP_SUPPORTED.
(dump_psymtab, maintenance_info_psymtabs): Print also
psymtabs_addrmap_supported.

gdb/testsuite/
PR breakpoints/13346
* gdb.dwarf2/dw2-objfile-overlap-inner.S: New file.
* gdb.dwarf2/dw2-objfile-overlap-outer.S: New file.
* gdb.dwarf2/dw2-objfile-overlap.exp: New file.

* python/py-type.c (type_object_methods): Fix "array" doc string.

*** empty log message ***

Make sure all types in gdb.ada/homonym testcase are used...

Otherwise, the compiler does not generate any debug info for them.
This fixes 3 FAILs:

    FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_1
    FAIL: gdb.ada/homonym.exp: ptype int_type at BREAK_1
    FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_2

gdb/testsuite/ChangeLog:

        * gdb.ada/homonym/pck.ads, gdb.ada/homonym/pck.adb: New files.
        * gdb.ada/homonym/homonym.adb: For use of all types defined
        locally inside both Get_Value subprograms.

daily update

gdb/testsuite/
Fix racy FAILs.
* gdb.base/foll-exec.exp (zap_session): Use gdb_test_no_output instead
of send_gdb.

* gdb.texinfo (Writing a Pretty-Printer): Use append method, not
add.

* elf32-m68k.c (elf_m68k_check_relocs) <R_68K_8, R68K_16, R_68K_32>: For
non-SEC_ALLOC sections break before GOT and PLT accounting.

* emultempl/spuelf.em (spu_elf_relink): Use pex_one in place
of execvp.

sourceware.org/ml/gdb-patches/2011-11/msg00778.html

* source.c (print_source_lines_base): Fix missing braces on else clause
leading to additional output.

* elf32-cris.c (cris_elf_check_relocs) <plt accounting for
R_CRIS_8, R_CRIS_16, and R_CRIS_32>: Move early break for
non-SEC_ALLOC sections before GOT and PLT accounting.

*** empty log message ***

daily update

ChangeLog:

* s390-nat.c (SUBOFF): Remove.
(s390_native_supply, s390_native_collect): New functions.
(supply_gregset, supply_fpregset): Use s390_native_supply.
(fill_gregset, fill_fpregset): Use s390_native_collect.

* s390-tdep.c (s390_pseudo_register_reggroup_p): Update comment.
(s390_unwind_pseudo_register): New function.
(s390_prologue_frame_unwind_cache): Unwind PSW address and mask
registers instead of PC and CC.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_sigtramp_frame_unwind_cache): Do not unwind PC, CC, or
full GPR pseudos.
(s390_trad_frame_prev_register): New function.
(s390_frame_prev_register): Use it.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_dwarf2_prev_register): Use s390_unwind_pseudo_register.
(s390_dwarf2_frame_init_reg): Unwind PSW address and mask.  Use
special callback to unwind any pseudo.

* features/s390-core32.xml: Add pswm/pswa to save/restore group.
* features/s390-core64.xml: Likewise.
* features/s390x-core64.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.

gdbserver/ChangeLog:

* linux-s390-low.c (s390_collect_ptrace_register): Fully convert
PSW address/mask between 8-byte and 16-byte formats.
(s390_supply_ptrace_register): Likewise.
(s390_get_pc, s390_set_pc): 4-byte PSW address always includes
basic addressing mode bit.

* s390-tdep.c (s390_gdbarch_init): Call set_gdbarch_get_siginfo_type.

* s390-tdep.c (s390_displaced_step_fixup): Fix processing of LARL
instruction.  Add more diagnostic output.

* gdb.base/testenv.exp: Skip on remote targets.  Unset global
environment variable after test completed.

* gdb.base/solib-nodir.exp: Skip if remote target.
* gdb.base/gdb.fortran.exp: Use shlib= flag when linking main
application.  Call gdb_load_shlibs.
* gdb.mi/mi-solib.exp: Use mi_load_shlibs instead of gdb_load_shlibs.

*** empty log message ***

daily update

opcode/
2011-11-29  Andrew Pinski  <apinski@cavium.com>

        * mips-dis.c (mips_arch_choices): Add Octeon+.
        * mips-opc.c (IOCT): Include Octeon+.
        (IOCTP): New macro.
        (mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29  Andrew Pinski  <apinski@cavium.com>

        * archures.c (bfd_mach_mips_octeonp): New macro.
        * bfd-in2.h: Regenerate.
        * bfd/cpu-mips.c (I_mipsocteonp): New enum value.
        (arch_info_struct): Add bfd_mach_mips_octeonp.
        * elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
        (mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29  Andrew Pinski  <apinski@cavium.com>

        * mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
        (INSN_OCTEONP): New macro.
        (CPU_OCTEONP): New macro.
        (OPCODE_IS_MEMBER): Add Octeon+.
        (M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29  Andrew Pinski  <apinski@cavium.com>

        * config/tc-mips.c (CPU_IS_OCTEON): New macro function.
        (CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
        (NO_ISA_COP): Likewise.
        (macro) <ld_st>: Add support when off0 is true.
        Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
        (mips_cpu_info_table): Add octeon+.
        * doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29  Andrew Pinski  <apinski@cavium.com>

        * gas/mips/mips.exp: Add octeon+ for an architecture.
        Run octeon-saa-saad test.
        (run_dump_test_arch): For Octeon architectures, also try octeon@.
        * gas/mips/octeon-pref.d: Remove -march=octeon from command line.
        * gas/mips/octeon.d: Likewise.
        * gas/mips/octeon-saa-saad.d: New file.
        * gas/mips/octeon-saa-saad.s: New file

* ar.c (ranlib_usage): Describe -D.
(ranlib_main): Parse -D.
(ranlib_touch): Set BFD_DETERMINISTIC_OUTPUT under -D.
* doc/binutils.texi (ranlib): Describe -D, and also --help/-h/-H.

New gdb.base/infoline.exp testcase.

gdb/testsuite/ChangeLog:

        * gdb.base/infoline.c, gdb.base/infoline.exp: New files.