Andi Kleen [Fri, 4 Dec 2015 11:50:32 +0000 (03:50 -0800)] 
perf/x86: Use INST_RETIRED.TOTAL_CYCLES_PS for cycles:pp for Skylake
I added UOPS_RETIRED.ALL by mistake to the Skylake PEBS event list for
cycles:pp. But the event is not documented for Skylake, and has some
issues.
The recommended replacement for cycles:pp is to use
INST_RETIRED.ANY+pebs as a base, similar to what CPUs before Sandy
Bridge did. This new event is called INST_RETIRED.TOTAL_CYCLES_PS. The
event is not really new, but has been already used by perf before
Sandy Bridge for the original cycles:p
Note the SDM doesn't document that event either, but it's being
documented in the latest version of the event list on:
https://download.01.org/perfmon/SKL
This patch does:
- Remove UOPS_RETIRED.ALL from the Skylake PEBS event list
- Add INST_RETIRED.ANY to the Skylake PEBS event list, and an table entry to
allow cmask=16,inv=1 for cycles:pp
- We don't need an extra entry for the base INST_RETIRED event,
because it is already covered by the catch-all PEBS table entry.
- Switch Skylake to use the Core2 PEBS alias (which is
INST_RETIRED.TOTAL_CYCLES_PS)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1448929689-13771-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi Kleen [Thu, 3 Dec 2015 21:22:20 +0000 (13:22 -0800)]
perf/x86: Allow zero PEBS status with only single active event
Normally we drop PEBS events with a zero status field. But when
there is only a single PEBS event active we can assume the
PEBS record is for that event. The PEBS buffer is always flushed
when PEBS events are disabled, so there is no risk of mishandling
state PEBS records this way.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1449177740-5422-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi Kleen [Thu, 3 Dec 2015 21:22:19 +0000 (13:22 -0800)]
perf/x86: Remove warning for zero PEBS status
The recent commit:
75f80859b130 ("perf/x86/intel/pebs: Robustify PEBS buffer drain")
causes lots of warnings on different CPUs before Skylake
when running PEBS intensive workloads.
They can have a zero status field in the PEBS record when
PEBS is racing with clearing of GLOBAl_STATUS.
This also can cause hangs (it seems there are still
problems with printk in NMI).
Disable the warning, but still ignore the record.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1449177740-5422-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Thu, 3 Dec 2015 17:35:21 +0000 (18:35 +0100)] 
perf/core: Collapse more IPI loops
This patch collapses the two 'hard' cases, which are
perf_event_{dis,en}able().
I cannot seem to convince myself the current code is correct.
So starting with perf_event_disable(); we don't strictly need to test
for event->state == ACTIVE, ctx->is_active is enough. If the event is
not scheduled while the ctx is, __perf_event_disable() still does the
right thing. Its a little less efficient to IPI in that case,
over-all simpler.
For perf_event_enable(); the same goes, but I think that's actually
broken in its current form. The current condition is: ctx->is_active
&& event->state == OFF, that means it doesn't do anything when
!ctx->active && event->state == OFF. This is wrong, it should still
mark the event INACTIVE in that case, otherwise we'll still not try
and schedule the event once the context becomes active again.
This patch implements the two function using the new
event_function_call() and does away with the tricky event->state
tests.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Wed, 6 Jan 2016 10:07:04 +0000 (11:07 +0100)] 
Merge branch 'perf/urgent' into perf/core, to pick up fixes before applying new changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 15 Dec 2015 12:49:05 +0000 (13:49 +0100)]
perf: Fix race in swevent hash
There's a race on CPU unplug where we free the swevent hash array
while it can still have events on. This will result in a
use-after-free which is BAD.
Simply do not free the hash array on unplug. This leaves the thing
around and no use-after-free takes place.
When the last swevent dies, we do a for_each_possible_cpu() iteration
anyway to clean these up, at which time we'll free it, so no leakage
will occur.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Thu, 10 Dec 2015 19:57:40 +0000 (20:57 +0100)]
perf: Fix race in perf_event_exec()
I managed to tickle this warning:
[ 2338.884942] ------------[ cut here ]------------
[ 2338.890112] WARNING: CPU: 13 PID: 35162 at ../kernel/events/core.c:2702 task_ctx_sched_out+0x6b/0x80()
[ 2338.900504] Modules linked in:
[ 2338.903933] CPU: 13 PID: 35162 Comm: bash Not tainted 4.4.0-rc4-dirty #244
[ 2338.911610] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.
122320131210 12/23/2013
[ 2338.923071]
ffffffff81f1468e ffff8807c6457cb8 ffffffff815c680c 0000000000000000
[ 2338.931382]
ffff8807c6457cf0 ffffffff810c8a56 ffffe8ffff8c1bd0 ffff8808132ed400
[ 2338.939678]
0000000000000286 ffff880813170380 ffff8808132ed400 ffff8807c6457d00
[ 2338.947987] Call Trace:
[ 2338.950726] [<
ffffffff815c680c>] dump_stack+0x4e/0x82
[ 2338.956474] [<
ffffffff810c8a56>] warn_slowpath_common+0x86/0xc0
[ 2338.963195] [<
ffffffff810c8b4a>] warn_slowpath_null+0x1a/0x20
[ 2338.969720] [<
ffffffff811a49cb>] task_ctx_sched_out+0x6b/0x80
[ 2338.976244] [<
ffffffff811a62d2>] perf_event_exec+0xe2/0x180
[ 2338.982575] [<
ffffffff8121fb6f>] setup_new_exec+0x6f/0x1b0
[ 2338.988810] [<
ffffffff8126de83>] load_elf_binary+0x393/0x1660
[ 2338.995339] [<
ffffffff811dc772>] ? get_user_pages+0x52/0x60
[ 2339.001669] [<
ffffffff8121e297>] search_binary_handler+0x97/0x200
[ 2339.008581] [<
ffffffff8121f8b3>] do_execveat_common.isra.33+0x543/0x6e0
[ 2339.016072] [<
ffffffff8121fcea>] SyS_execve+0x3a/0x50
[ 2339.021819] [<
ffffffff819fc165>] stub_execve+0x5/0x5
[ 2339.027469] [<
ffffffff819fbeb2>] ? entry_SYSCALL_64_fastpath+0x12/0x71
[ 2339.034860] ---[ end trace
ee1337c59a0ddeac ]---
Which is a WARN_ON_ONCE() indicating that cpuctx->task_ctx is not
what we expected it to be.
This is because context switches can swap the task_struct::perf_event_ctxp[]
pointer around. Therefore you have to either disable preemption when looking
at current, or hold ctx->lock.
Fix perf_event_enable_on_exec(), it loads current->perf_event_ctxp[]
before disabling interrupts, therefore a preemption in the right place
can swap contexts around and we're using the wrong one.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: syzkaller <syzkaller@googlegroups.com>
Link: http://lkml.kernel.org/r/20151210195740.GG6357@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 18 Dec 2015 08:46:17 +0000 (09:46 +0100)]
Merge tag 'perf-core-for-mingo-3' of git://git./linux/kernel/git/acme/linux into perf/core
Pull new perf tool feature from Arnaldo Carvalho de Melo:
" User visible changes:
- Generate perf.data files from 'perf stat', to tap into the scripting
capabilities perf has instead of defining a 'perf stat' specific scripting
support to calculate event ratios, etc. Simple example:
$ perf stat record -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,134,996 cycles
0.
000670644 seconds time elapsed
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':
1,134,996 cycles
0.
000670644 seconds time elapsed
$
It generates PERF_RECORD_ userspace records to store the details:
$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$
An effort was made to make perf.data files generated like this to not
generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
Jiri's cover letter for this series:
The initial attempt defined its own formula lang and allowed triggering user's
script on the end of the stat command:
http://marc.info/?l=linux-kernel&m=
136742146322273&w=2
This patchset abandons the idea of new formula language and rather adds support
to:
- store stat data into perf.data file
- add python support to process stat events
Basically it allows to store stat data into perf.data and post process it with
python scripts in a similar way we do for sampling data.
The stat data are stored in new stat, stat-round, stat-config user events.
stat - stored for each read syscall of the counter
stat round - stored for each interval or end of the command invocation
stat config - stores all the config information needed to process data
so report tool could restore the same output as record
The python script can now define 'stat__<eventname>_<modifier>' functions
to get stat events data and 'stat__interval' to get stat-round data.
See CPI script example in scripts/python/stat-cpi.py."
Also a few other changes:
User visible changes:
- Make command line options always available, even when they
depend on some feature being enabled, warning the user about
use of such options (Wang Nan)
- Support --vmlinux in perf record, useful, so far, for eBPF,
where we will set up events that will be used in the record
session (He Kuang)
- Automatically disable collecting branch flags and cycles with
--call-graph lbr. This allows avoiding a bunch of extra MSR
reads in the PMI on Skylake. (Andi Kleen)
Infrastructure changes:
- Dump the stack when a 'perf test -v ' entry segfaults, so far we
would have to run it under gdb with 'set follow-fork-mode child'
set to get a proper backtrace (Arnaldo Carvalho de Melo)
- Initialize the refcnt in 'struct thread' to 1 and fixup its
users accordingly, so that we try to have the same refcount
model accross the perf codebase (Arnaldo Carvalho de Melo)
- More prep work for moving the subcmd infrastructure out of
tools/perf/ and into tools/lib/subcmd/ to be used by other
tools/ living utilities (Josh Poimboeuf)
- Fix 'perf test' hist testcases when kptr_restrict is on (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 18 Dec 2015 08:43:24 +0000 (09:43 +0100)]
Merge branch 'perf/urgent' into perf/core, to make sure a cherry-picked commit does not create conflicts
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 18 Dec 2015 08:40:13 +0000 (09:40 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent tooling fix from Arnaldo Carvalho de Melo:
User visible changes:
- Fix 'perf list' segfault due to lack of support for PERF_CONF_SW_BPF_OUTPUT
in an array used just for printing available events, robustify the code
involved (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 18 Dec 2015 08:37:51 +0000 (09:37 +0100)]
Merge tag 'perf-core-for-mingo-2.1' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Add record.build-id config option to 'perf record', to allow configuring
in the ~/.perfconfig file if and how build-ids should be processed, allowing
a permanent setting for options such as -B and -N: (Namhyung Kim)
$ perf record -h -B -N
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-B, --no-buildid do not collect buildids in perf.data
-N, --no-buildid-cache do not update the buildid cache
$
Infrastructure changes:
- Move code for options parsing and subcommand handling from tools/perf/
to tools/lib/subcmd/, so that it can be used by other tools/ living
utilities (Josh Poimboeuf)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Thu, 5 Nov 2015 14:41:02 +0000 (15:41 +0100)] 
perf stat report: Allow to override aggr_mode
Allowing to override record aggr_mode. It's possible to use perf stat
like:
$ perf stat report -A
$ perf stat report --per-core
$ perf stat report --per-socket
To customize the recorded aggregate mode regardless what was used during
the stat record command.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-19-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:41:00 +0000 (15:41 +0100)]
perf stat report: Process event update events
Adding processing of event update events, so perf stat report can store
additional info for events - unit,scale,name.
Committer note:
Before:
# perf stat record -e power/energy-cores/ -a
^C
Performance counter stats for 'system wide':
77.41 Joules power/energy-cores/
1.
597176695 seconds time elapsed
# perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e power/energy-cores/ -a':
332,488,114,176 power/energy-cores/
1.
597176695 seconds time elapsed
#
After, using the same perf.data file generated in the "Before" case
above:
# perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e power/energy-cores/ -a':
77.41 Joules power/energy-cores/
1.
597176695 seconds time elapsed
#
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-17-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:59 +0000 (15:40 +0100)]
perf stat report: Process stat and stat round events
Adding processing of stat and stat round events.
The stat data com in stat events, using generic function
process_stat_round_event to store data under perf_evsel object.
The stat-round events comes each interval or as last event in non
interval mode. The function process_stat_round_event process stored data
for each perf_evsel object and print it out.
Committer note:
After this patch:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.498381 task-clock (msec) # 0.571 CPUs utilized
2 context-switches # 0.004 M/sec
0 cpu-migrations # 0.000 K/sec
149 page-faults # 0.299 M/sec
1,271,635 cycles # 2.552 GHz
928,712 stalled-cycles-frontend # 73.03% frontend cycles idle
663,286 stalled-cycles-backend # 52.16% backend cycles idle
792,614 instructions # 0.62 insns per cycle
# 1.17 stalled cycles per insn
136,850 branches # 274.589 M/sec
<not counted> branch-misses (0.00%)
0.
000873419 seconds time elapsed
$
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record usleep 1':
0.498381 task-clock (msec) # 0.571 CPUs utilized
2 context-switches # 0.004 M/sec
0 cpu-migrations # 0.000 K/sec
149 page-faults # 0.299 M/sec
1,271,635 cycles # 2.552 GHz
928,712 stalled-cycles-frontend # 73.03% frontend cycles idle
663,286 stalled-cycles-backend # 52.16% backend cycles idle
792,614 instructions # 0.62 insns per cycle
# 1.17 stalled cycles per insn
136,850 branches # 274.589 M/sec
<not counted> branch-misses (0.00%)
0.
000873419 seconds time elapsed
$
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:41:01 +0000 (15:41 +0100)]
perf stat report: Move csv_sep initialization before report command
So we have csv_sep properly initialized before report command leg.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-18-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:58 +0000 (15:40 +0100)]
perf stat report: Add support to initialize aggr_map from file
Using perf.data's perf_env data to initialize aggregate config.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-15-git-send-email-jolsa@kernel.org
[ s/stat/st/g, s/socket/socket_id/g to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:57 +0000 (15:40 +0100)]
perf stat report: Process stat config event
Adding processing of stat config event and initialize stat_config
object.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-14-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:56 +0000 (15:40 +0100)]
perf stat report: Process cpu/threads maps
Adding processing of cpu/threads maps. Configuring session's evlist with
these maps.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-13-git-send-email-jolsa@kernel.org
[ s/stat/st/g, s/time/tm/g parameters to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:55 +0000 (15:40 +0100)]
perf stat report: Add report command
Adding 'perf stat report' command support. ATM it only processes attr
events and display nothing.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:54 +0000 (15:40 +0100)]
perf stat record: Synthesize event update events
Synthesize other events stuff not carried within attr event - unit,
scale, name.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:53 +0000 (15:40 +0100)]
perf stat record: Do not allow record with multiple runs mode
We currently don't support storing multiple session in perf.data,
so we can't allow -r option in stat record.
$ perf stat -e cycles -r 2 record ls
Cannot use -r option with perf stat record.
Committer note:
Before this patch we would a perf.data file such as:
$ perf stat -e cycles -r 2 record ls
<SNIP>
Performance counter stats for 'ls' (2 runs):
3,935,236 cycles
0.
002353261 seconds time elapsed ( +- 4.76% )
$ perf report -D | grep PERF_RECORD | grep ROUND
0xf0 [0]: failed to process type: 16
Error:
failed to process sample
$
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:52 +0000 (15:40 +0100)]
perf stat record: Write stat round events on record
Writing stat round events on 'perf stat record' for each interval round.
In non interval mode we store round event after the last stat event.
Committer note:
After the patch:
$ perf report -D | grep PERF_RECORD | grep ROUND
0x852 [0x18]: PERF_RECORD_STAT_ROUND
$
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:51 +0000 (15:40 +0100)]
perf stat record: Write stat events on record
Writing stat events on 'perf stat record' at the time we read counter
values from kernel.
Committer note:
After the patch:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.598006 task-clock (msec) # 0.484 CPUs utilized
1 context-switches # 0.002 M/sec
0 cpu-migrations # 0.000 K/sec
52 page-faults # 0.087 M/sec
882,744 cycles # 1.476 GHz
581,416 stalled-cycles-frontend # 65.86% frontend cycles idle
<not supported> stalled-cycles-backend
636,479 instructions # 0.72 insns per cycle
# 0.91 stalled cycles per insn
129,334 branches # 216.275 M/sec
7,512 branch-misses # 5.81% of all branches
0.
001235157 seconds time elapsed
$ oldperf evlist
task-clock
context-switches
cpu-migrations
page-faults
cycles
stalled-cycles-frontend
stalled-cycles-backend
instructions
branches
branch-misses
$ oldperf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$ perf report -D | grep PERF_RECORD
0x5b0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 5504
0x5d8 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x5ea [0x40]: PERF_RECORD_STAT_CONFIG
0x62a [0x30]: PERF_RECORD_STAT
0x65a [0x30]: PERF_RECORD_STAT
0x68a [0x30]: PERF_RECORD_STAT
0x6ba [0x30]: PERF_RECORD_STAT
0x6ea [0x30]: PERF_RECORD_STAT
0x71a [0x30]: PERF_RECORD_STAT
0x74a [0x30]: PERF_RECORD_STAT
0x77a [0x30]: PERF_RECORD_STAT
0x7aa [0x30]: PERF_RECORD_STAT
-1 -1 0x7da [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:50 +0000 (15:40 +0100)]
perf stat record: Add pipe support for record command
Allowing storing stat record data into pipe, so report tools
(report/script) could read data directly from record.
Committer note:
Before this patch:
$ perf stat record -o - usleep 1 | perf report -i -
incompatible file format (rerun with -v to learn more)
$ perf stat record -o - usleep 1 | perf script -i -
incompatible file format (rerun with -v to learn more)
$ ls -la perf.data
ls: cannot access perf.data: No such file or directory
$
After:
$ perf stat record -o - usleep 1 | perf report -i -
# To display the perf.data header info, please use
# --header/--header-only options.
#
Error:
The - file has no samples!
$ perf stat record -o - usleep 1 | perf script -i -
Display of symbols requested but neither sample IP nor sample address
is selected. Hence, no addresses to convert to symbols.
0 [0x80]: failed to process type: 64
$ ls -la perf.data
ls: cannot access perf.data: No such file or directory
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:49 +0000 (15:40 +0100)]
perf stat record: Store events IDs in perf data file
Store event IDs in evlist object so it get stored into perf.data file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:49 +0000 (15:40 +0100)]
perf evlist: Export id_add_fd()
Will be used to storing the event IDs in evlist object so it get stored
into perf.data file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-6-git-send-email-jolsa@kernel.org
[ Split from the patch storing the ids in the perf.data file ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:48 +0000 (15:40 +0100)]
perf stat record: Synthesize stat record data
Synthesizing needed stat record data for report/script:
- cpu/thread maps
- stat config
Committer note:
New records generated on a perf.data file with this patch:
$ perf report -D | grep PERF_RECORD_
0x568 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 29097
0x590 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x5a2 [0x40]: PERF_RECORD_STAT_CONFIG
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-5-git-send-email-jolsa@kernel.org
[ Adjusted wrt kernel PERF_RECORD_MMAP added when introducing 'perf stat record' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:47 +0000 (15:40 +0100)]
perf stat record: Initialize record features
Disabling all non stat related features.
Also as we now enable STAT feature in the data file, adding code to
instruct session open to skip sample type checking for stat data files.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 5 Nov 2015 14:40:46 +0000 (15:40 +0100)]
perf stat record: Add record command
Add 'perf stat record' command support. It creates simple (header only)
perf.data file ATM.
The record command could be specified anywhere among stat options. All
stat command options are valid for stat record command with '-o' option
exception. If specified for record command it denotes the perf data file
name.
Committer note:
Set sample_type to PERF_SAMPLE_IDENTIFIER, which should be harmless
while avoiding that older tools show confusing messages, for instance,
with sample_type = 0, we get:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.630237 task-clock (msec) # 0.528 CPUs utilized
1 context-switches # 0.002 M/sec
0 cpu-migrations # 0.000 K/sec
52 page-faults # 0.083 M/sec
978,312 cycles # 1.552 GHz
671,931 stalled-cycles-frontend # 68.68% frontend cycles idle
<not supported> stalled-cycles-backend
646,379 instructions # 0.66 insns per cycle
# 1.04 stalled cycles per insn
131,046 branches # 207.931 M/sec
7,073 branch-misses # 5.40% of all branches
0.
001193240 seconds time elapsed
$ oldperf evlist
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
non matching sample_type
$
While with sample_type set to PERF_SAMPLE_IDENTIFIER, after we re-run 'perf
stat record usleep' we get:
$ oldperf evlist
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
task-clock
context-switches
cpu-migrations
page-faults
cycles
stalled-cycles-frontend
stalled-cycles-backend
instructions
branches
branch-misses
$
Which at least shows the names of the events in the perf.data file.
Additionally, such files, when passed to 'perf report' will produce:
$ oldperf report --stdio
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
Warning:
Kernel address maps (/proc/{kallsyms,modules}) were restricted.
Check /proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples
can't be resolved.
Samples in kernel modules can't be resolved as well.
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Which is confusing and can be solved by just adding the kernel mmap record,
which will also remove that warning about the data size field being equal to
zero, after generating the mmap record:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.600796 task-clock (msec) # 0.478 CPUs utilized
1 context-switches # 0.002 M/sec
0 cpu-migrations # 0.000 K/sec
54 page-faults # 0.090 M/sec
886,844 cycles # 1.476 GHz
582,169 stalled-cycles-frontend # 65.65% frontend cycles idle
<not supported> stalled-cycles-backend
638,344 instructions # 0.72 insns per cycle
# 0.91 stalled cycles per insn
130,204 branches # 216.719 M/sec
7,500 branch-misses # 5.76% of all branches
0.
001255897 seconds time elapsed
$ oldperf evlist
task-clock
context-switches
cpu-migrations
page-faults
cycles
stalled-cycles-frontend
stalled-cycles-backend
instructions
branches
branch-misses
$ oldperf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
[acme@zoo linux]$
No warnings, sensible output about what are the events in the perf.data file and also
a "file has no samples" message, which indeed it doesn't.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: htp://lkml.kernel.org/r/
1446734469-11352-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:43 +0000 (15:51 +0100)]
perf tools: Introduce stat perf.data header feature
Introducing the 'stat' feature to mark a perf.data as created by the
'perf stat record' command. It contains no data.
It's needed so that the report tools (report/script) can differentiate
sampling data from counting data, because they need to be treated in a
different way.
In the future it might be used to store the version of the stat storage
system used.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-28-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:42 +0000 (15:51 +0100)]
perf report: Display newly added events in raw dump
The 'perf report -D' command will now display detailed output for these
newly added events:
event_update
thread_map
cpu_map
stat
stat_config
stat_round
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-27-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:41 +0000 (15:51 +0100)]
perf tools: Add perf_event__fprintf_event_update function
To display a 'event update' event for raw dump.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-26-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:40 +0000 (15:51 +0100)]
perf tools: Add event_update event cpus type
Adding the cpumask 'event update' event, that stores/transfer the
cpumask for a event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-25-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:39 +0000 (15:51 +0100)]
perf tools: Add event_update event name type
Adding name type 'event update' event, that stores/transfer events name.
Event's name is stored within perf.data's EVENT_DESC feature, but we
don't have it if we get the report data from pipe.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-24-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:38 +0000 (15:51 +0100)]
perf tools: Add event_update event scale type
A__allocdding scale type 'event update' event, that stores/transfer
events scale value. The PMU events can define the scale
value which is used to multiply events data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-23-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:37 +0000 (15:51 +0100)]
perf tools: Add event_update event unit type
Adding unit type 'event update' event, that stores/transfer events unit
name. The unit name is part of the perf stat output data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-22-git-send-email-jolsa@kernel.org
[ Rename __alloc() to __new() for consistency ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:36 +0000 (15:51 +0100)]
perf tools: Add event_update user level event
It'll serve as a base event for additional event attributes details,
that are not part of the attr event.
At the moment this event is just a dummy one without any specific
functionality. The type value will distinguish the update event details.
It'll come in the following patches.
The idea for this event is to be extensible for any update that the
event might need in the future.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-21-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:35 +0000 (15:51 +0100)]
perf tools: Add stat events fprintf functions
Introducing the following functions to display the stat events for raw
dump.
perf_event__fprintf_stat
perf_event__fprintf_stat_round
perf_event__fprintf_stat_config
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-20-git-send-email-jolsa@kernel.org
[ s/stat/st/g and s/round/rd/g parameters to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:34 +0000 (15:51 +0100)]
perf tools: Add stat round event synthesize function
Introduce the perf_event__synthesize_stat_round function to
synthesize a 'struct stat_round_event'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-19-git-send-email-jolsa@kernel.org
[ Renamed 'time' parameter to 'evtime' to fix build on older systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:33 +0000 (15:51 +0100)]
perf tools: Add stat round user level event
Adding the stat round event to be stored after each stat interval round,
so that report tools (report/script) gets notified and process interval
data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-18-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:32 +0000 (15:51 +0100)]
perf tools: Add stat event read function
Introducing the perf_event__process_stat_event function to process a
'struct perf_stat' data from a stat event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-17-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:31 +0000 (15:51 +0100)]
perf tools: Add stat event synthesize function
Introduce the perf_event__synthesize_stat function to synthesize a
'struct stat_event'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-16-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:30 +0000 (15:51 +0100)]
perf tools: Add stat user level event
Adding a stat event to store a 'struct perf_counter_values' for a given
event/cpu/thread.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-15-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:29 +0000 (15:51 +0100)]
perf tools: Add stat config event read function
Introducing the perf_event__read_stat_config function to read a struct
perf_stat_config object data from a stat config event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:28 +0000 (15:51 +0100)]
perf tools: Add stat config event synthesize function
Introduce the perf_event__synthesize_stat_config to synthesize a 'struct
perf_stat_config'.
Storing the stat config in the form of tag-value pairs will, I believe,
sort out future version extensibility issues.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:27 +0000 (15:51 +0100)]
perf tools: Add stat config user level event
Adding the stat config event to pass/store stat config data, so report
tools (report/script) know how to interpret stat data.
The config data is stored in a 'tag|value' way to allow for easy
extension and backwards compatibility.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-12-git-send-email-jolsa@kernel.org
[ stat_config_term_event -> stat_config_event_entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:26 +0000 (15:51 +0100)]
perf cpu_map: Add perf_event__fprintf_cpu_map function
To display a cpu_map event for raw dump.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:25 +0000 (15:51 +0100)]
perf cpu_map: Add cpu_map__new_event function
Introducing the cpu_map__new_event function to create a struct cpu_map
object from a cpu_map event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:24 +0000 (15:51 +0100)]
perf cpu_map: Add cpu_map event synthesize function
Introduce the perf_event__synthesize_cpu_map function to synthesize a
struct cpu_map.
Added generic interface:
cpu_map_data__alloc
cpu_map_data__synthesize
to make the cpu_map synthesizing usable for other events.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:23 +0000 (15:51 +0100)]
perf cpu_map: Add cpu_map user level event
Adding the cpu_map event to pass/store cpu maps as data in
a pipe/perf.data.
We store maps in 2 formats:
- list of cpus
- mask of cpus
The format that takes less space is selected transparently in the
following patch.
The interface is made generic, so we could add the cpumap event data
into another event in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-8-git-send-email-jolsa@kernel.org
[ cpu_map_data_cpus -> cpu_map_entries, cpu_map_data_mask -> cpu_map_mask ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:22 +0000 (15:51 +0100)]
perf thread_map: Add perf_event__fprintf_thread_map function
To display a thread_map event for a raw dump.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:21 +0000 (15:51 +0100)]
perf thread_map: Add thread_map__new_event function
Introducing the thread_map__new_event function to create a struct
thread_map object from a thread_map event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:20 +0000 (15:51 +0100)]
perf thread_map: Add thread_map event sythesize function
Introduce the perf_event__synthesize_thread_map2 function to synthesize
struct thread_map.
The perf_event__synthesize_thread_map name is already taken for
synthesizing the complete threads data (comm/mmap/fork).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-5-git-send-email-jolsa@kernel.org
[ Rename thread_map_data_event to thread_map_event_entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 25 Oct 2015 14:51:19 +0000 (15:51 +0100)]
perf thread_map: Add thread_map user level event
Adding the thread_map event to pass/store thread maps as data in
the pipe/perf.data.
Storing the thread ID along with the standard comm[16] thread name string.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-4-git-send-email-jolsa@kernel.org
[ Renamed thread_map_data_event to thread_map_event_entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Tue, 15 Dec 2015 15:39:40 +0000 (09:39 -0600)] 
tools subcmd: Rename subcmd header include guards
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/d8081e7528b25ad91f4154b6a3fd063e93c108ec.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Tue, 15 Dec 2015 15:39:39 +0000 (09:39 -0600)]
perf subcmd: Create subcmd library
Move the subcommand-related files from perf to a new library named
libsubcmd.a.
Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Tue, 15 Dec 2015 15:39:38 +0000 (09:39 -0600)]
perf tools: Finalize subcmd independence
For the files that will be moved to the subcmd library, remove all their
perf-specific includes and duplicate any needed functionality.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/6e12946f0f26ce4d543d34db68d9dae3c8551cb9.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Tue, 15 Dec 2015 15:39:37 +0000 (09:39 -0600)]
perf tools: Remove 'perf' from subcmd function and variable names
In preparation for moving exec_cmd.c and run-command.c out of perf and
into a library, remove 'perf' from all the symbol names.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/bc3ee82b40b8f396b644fa49e0f7260ce442635b.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Tue, 15 Dec 2015 15:39:36 +0000 (09:39 -0600)]
perf tools: Remove subcmd dependencies on strbuf
Introduce and use new astrcat() and astrcatf() functions which replace
the strbuf functionality for subcmd.
For now they duplicate strbuf's die-on-allocation-error policy.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/957d207e1254406fa11fc2e405e75a7e405aad8f.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 27 Nov 2015 19:04:58 +0000 (16:04 -0300)] 
perf list: Robustify event printing routine
When
a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") added
PERF_COUNT_SW_BPF_OUTPUT we ended up with a new entry in the event_symbols_sw
array that wasn't initialized, thus set to NULL, fix print_symbol_events()
to check for that case so that we don't crash if this happens again.
(gdb) bt
#0 __match_glob (ignore_space=false, pat=<optimized out>, str=<optimized out>) at util/string.c:198
#1 strglobmatch (str=<optimized out>, pat=pat@entry=0x7fffffffe61d "stall") at util/string.c:252
#2 0x00000000004993a5 in print_symbol_events (type=1, syms=0x872880 <event_symbols_sw+160>, max=11, name_only=false, event_glob=0x7fffffffe61d "stall")
at util/parse-events.c:1615
#3 print_events (event_glob=event_glob@entry=0x7fffffffe61d "stall", name_only=false) at util/parse-events.c:1675
#4 0x000000000042c79e in cmd_list (argc=1, argv=0x7fffffffe390, prefix=<optimized out>) at builtin-list.c:68
#5 0x00000000004788a5 in run_builtin (p=p@entry=0x871758 <commands+120>, argc=argc@entry=2, argv=argv@entry=0x7fffffffe390) at perf.c:370
#6 0x0000000000420ab0 in handle_internal_command (argv=0x7fffffffe390, argc=2) at perf.c:429
#7 run_argv (argv=0x7fffffffe110, argcp=0x7fffffffe11c) at perf.c:473
#8 main (argc=2, argv=0x7fffffffe390) at perf.c:588
(gdb) p event_symbols_sw[PERF_COUNT_SW_BPF_OUTPUT]
$4 = {symbol = 0x0, alias = 0x0}
(gdb)
A patch to robustify perf to not segfault when the next counter gets added in
the kernel will follow this one.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-57wysblcjfrseb0zg5u7ek10@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 27 Nov 2015 18:54:33 +0000 (15:54 -0300)]
perf list: Add support for PERF_COUNT_SW_BPF_OUT
When PERF_COUNT_SW_BPF_OUTPUT was added to the kernel we should've
added it to tools/perf, where it is used just to list events.
This ended up causing a segfault in commands like "perf list stall".
Fix it by adding that new software counter.
A patch to robustify perf to not segfault when the next counter gets
added in the kernel will follow this one.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uya354upi3eprsey6mi5962d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Tue, 15 Dec 2015 15:39:35 +0000 (09:39 -0600)]
perf tools: Provide subcmd configuration at runtime
Create init functions for exec_cmd.c and pager.c. This allows their
configuration to be specified at runtime so they can be split out into a
separate library which can be used by other programs. Their
configuration is stored in a shared subcmd_config struct.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/21f5f6b38da72c985a8dcfa185700d03e7eecd1d.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Tue, 15 Dec 2015 15:39:34 +0000 (09:39 -0600)]
perf tools: Document the fact that parse_options*() may exit
Generally, calling exit() from a library is bad practice. Eventually
these functions might be redesigned so that they don't exit. For now,
just document the fact that they do.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/97b1af06cc3b18dd0f49e655d6d659eaa64ecde5.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Tue, 15 Dec 2015 15:39:33 +0000 (09:39 -0600)]
perf tools: Move strlcpy() from perf to tools/lib/string.c
strlcpy() will be needed by the subcmd library. Move it to the shared
tools/lib/string.c file which can be used by other tools.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/71e2804b973bf39ad3d3b9be10f99f2ea630be46.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Tue, 15 Dec 2015 15:39:32 +0000 (09:39 -0600)]
tools build: Fix feature Makefile issues with 'O='
When building perf binaries outside the source tree with 'make O=<dir>',
the auto-detected features get re-tested for every build, which is
unnecessary and inconsistent with the behavior seen when building
directly in the source tree.
Another issue is that 'make O=<dir> clean' doesn't remove the feature
files from the object tree.
Fix these problems by looking for the binaries in the $(OUTPUT)
directory.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/113bd01530e9761778c60a75a96c65fc59860f68.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 15 Dec 2015 01:49:56 +0000 (10:49 +0900)] 
perf record: Add record.build-id config option
Post processing at 'perf record' takes a long time on big machines.
What it does is to find the build-id of binaries found in the event
stream, so that it can make sure, at 'report' time, that the symtabs (be
it ELF, kallsyms, etc) being used to resolve symbols are the ones
matching the binaries found at 'record' time.
Sometimes we just want to skip this processing of events at the end of
the session to get quicker results, making sure the binaries haven't
changed from 'record' to 'report' time.
Add a new config option to control this behavior.
The record.build-id config variable can have one of the following
values:
- cache: post-process data and save/update the binaries into the
build-id cache (in ~/.debug). This is the default.
- no-cache: post-process the data but not update the build-id cache.
Same effect as using the -N option.
- skip: skip post-processing and do not update the cache.
Same effect as using the -B option.
Reported-and-Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1450144196-22957-1-git-send-email-namhyung@kernel.org
[ Added some more text to the documentation ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
He Kuang [Mon, 14 Dec 2015 10:39:23 +0000 (10:39 +0000)] 
perf record: Support custom vmlinux path
Make perf-record command support --vmlinux option if BPF_PROLOGUE is on.
'perf record' needs vmlinux as the source of DWARF info to generate
prologue for BPF programs, so path of vmlinux should be specified.
Short name 'k' has been taken by 'clockid'. This patch skips the short
option name and uses '--vmlinux' for vmlinux path.
Documentation is also updated.
Test result:
In a production (or broken) environment:
(by:
# rm -rf ~/.debug/
# mv /lib/modules/`uname -r`/build/vmlinux /tmp/
)
# ./perf record -e ./test_bpf_base.c ls
Failed to find the path for kernel: No such file or directory
event syntax error: './test_bpf_base.c'
\___ You need to check probing points in BPF file
...
# ./perf record --vmlinux /tmp/vmlinux -e ./test_bpf_base.c ls
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
Help messages when build with NO_LIBBPF:
# ./perf record -h
--transaction sample transaction flags (special events only)
--vmlinux <file> vmlinux pathname
(not built-in because NO_LIBBPF=1)
# ./perf record --vmlinux /tmp/vmlinux ls /
Warning: option `vmlinux' is being ignored because NO_LIBBPF=1
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (11 samples) ]
Help messages when build with NO_DWARF:
# ./perf record -h
--transaction sample transaction flags (special events only)
--vmlinux <file> vmlinux pathname
(not built-in because NO_DWARF=1)
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1450089563-122430-15-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Mon, 14 Dec 2015 10:39:22 +0000 (10:39 +0000)] 
perf tools: Make options always available, even if required libs not linked
This patch keeps options of perf builtins same in all conditions. If
one option is disabled because of compiling options, users should be
notified.
Masami suggested another implementation in [1] that, by adding a
OPTION_NEXT_DEPENDS option before those options in the 'struct option'
array, options parser knows an option is disabled. However, in some
cases this array is reordered (options__order()). In addition, in
parse-option.c that array is const, so we can't simply merge
information in decorator option into the affacted option.
This patch chooses a simpler implementation that, introducing a
set_option_nobuild() function and two option parsing flags. Builtins
with such options should call set_option_nobuild() before option
parsing. The complexity of this patch is because we want some of options
can be skipped safely. In this case their arguments should also be
consumed.
Options in 'perf record' and 'perf probe' are fixed in this patch.
[1] http://lkml.kernel.org/g/
50399556C9727B4D88A595C8584AAB3752627CD4@GSjpTKYDCembx32.service.hitachi.net
Test result:
Normal case:
# ./perf probe --vmlinux /tmp/vmlinux sys_write
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
Build with NO_DWARF=1:
# ./perf probe -L sys_write
Error: switch `L' is not available because NO_DWARF=1
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
or: perf probe [<options>] --del '[GROUP:]EVENT' ...
or: perf probe --list [GROUP:]EVENT ...
or: perf probe [<options>] --funcs
-L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]>
Show source code lines.
(not built-in because NO_DWARF=1)
# ./perf probe -k /tmp/vmlinux sys_write
Warning: switch `k' is being ignored because NO_DWARF=1
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
# ./perf probe --vmlinux /tmp/vmlinux sys_write
Warning: option `vmlinux' is being ignored because NO_DWARF=1
Added new event:
[SNIP]
# ./perf probe -l
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
...
-k, --vmlinux <file> vmlinux pathname
(not built-in because NO_DWARF=1)
-L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]>
Show source code lines.
(not built-in because NO_DWARF=1)
...
-V, --vars <FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT>
Show accessible variables on PROBEDEF
(not built-in because NO_DWARF=1)
--externs Show external variables too (with --vars only)
(not built-in because NO_DWARF=1)
--no-inlines Don't search inlined functions
(not built-in because NO_DWARF=1)
--range Show variables location range in scope (with --vars only)
(not built-in because NO_DWARF=1)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1450089563-122430-14-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Mon, 14 Dec 2015 04:18:12 +0000 (22:18 -0600)]
perf tools: Convert parse-options.c internal functions to static
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c027b5f47ec1055077f5650edb1c7ad37c191e6c.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Mon, 14 Dec 2015 04:18:09 +0000 (22:18 -0600)]
perf tools: Move help_unknown_cmd() to its own file
help_unknown_cmd() is quite perf-specific because it relies on some
perf_config*() functions. Move it and its supporting functions out into
a separate file so that help.c can be moved to a library.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/562d918bcaaf340c1ae3e47586b3f0ae33b9918b.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Mon, 14 Dec 2015 04:18:08 +0000 (22:18 -0600)]
perf tools: Remove check for unused PERF_PAGER_IN_USE
PERF_PAGER_IN_USE doesn't seem to be used anywhere, so let's remove it.
This will also make it easier to move pager.c into a separate library.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ed9e8370db9811746dc590544cf48c36dcfb1731.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Mon, 14 Dec 2015 04:18:07 +0000 (22:18 -0600)]
perf tools: Create pager.h
Move the 'pager' function prototypes into a new pager.h so that the
pager code can be moved out to a library.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ba7c316474dd6bfc047e5c6dc4dcab39a982caf5.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Mon, 14 Dec 2015 04:18:06 +0000 (22:18 -0600)]
perf build: Rename LIB_PATH -> API_PATH
'LIB_PATH' is a misnomer because there are multiple library paths.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c10df0b749a27f05cc531fe06b8dd71a329341fa.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Mon, 14 Dec 2015 04:18:05 +0000 (22:18 -0600)]
perf build: Fix 'make clean'
Add some missing files to the 'make clean' target.
Reported-and-Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/8b1f5a5bd66a652be071d423e64aaa994254be31.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Mon, 14 Dec 2015 04:18:04 +0000 (22:18 -0600)]
perf test: Remove tarpkg at end of test
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5e7e97a23e3ce11b59d1009b39ebb6d2813a0560.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Mon, 14 Dec 2015 04:18:03 +0000 (22:18 -0600)]
perf test: Add Build file to dependencies for llvm-src-*.c
Because the Build file writes source code to the generated llvm-src-*.c
files, it should be listed as one of the dependencies, so that any
future changes to the code being echoed won't require a 'make clean'.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/9b9886c295750dc83cbbb29a665d280f9c5e8b3e.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Poimboeuf [Mon, 14 Dec 2015 04:18:01 +0000 (22:18 -0600)]
perf build: Remove unnecessary line in Makefile.feature
This line always silently fails because it doesn't add the 'test-'
prefix to the .bin file.
And it seems to be unnecessary anyway: the line immediately after it
does all the individual feature checks.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/554a05c18af564ba015c9e68f25730126e0f4acb.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 14 Dec 2015 03:11:13 +0000 (12:11 +0900)]
perf test: Fix hist testcases when kptr_restrict is on
Currently if kptr_restrict is enabled, all hist tests failed with
segfaults. This is because machine__create_kernel_maps() in
setup_fake_machine() failed in that situation, and it called
machine__delete() on the error path. But outer callers again called
machines__exit() causing double free for the host machine.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1450062673-22312-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Sat, 12 Dec 2015 00:12:24 +0000 (16:12 -0800)]
perf evsel: Disable branch flags/cycles for --callgraph lbr
[The kernel patch needed for this is in tip now (
b16a5b52eb9 perf/x86:
Add option to disable ...) So this user tools patch to make use of it
should be merged now]
Automatically disable collecting branch flags and cycles with
--call-graph lbr. This allows avoiding a bunch of extra MSR
reads in the PMI on Skylake.
When the kernel doesn't support the new flags they are automatically
cleared in the fallback code.
v2: Switch to use branch_sample_type instead of sample_type.
Adjust description.
Fix the fallback logic.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1449879144-29074-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 11 Dec 2015 22:11:23 +0000 (19:11 -0300)]
perf thread: Fix reference count initial state
We should always return from thread__new(), the constructor, with the
object with a reference count of one, so that:
struct thread *thread = thread__new();
thread__put(thread);
Will call thread__delete().
If any reference is made to that 'thread' variable, it better use
thread__get(thread) to hold a reference.
We were returning with thread->refcnt set to zero, fix it and some cases
where thread__delete() was being called, which were not a problem
because just one reference was being used, now that we set it to 1, use
thread__put() instead.
Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4b9mkuk66to4ecckpmpvqx6s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 11 Dec 2015 22:06:53 +0000 (19:06 -0300)]
perf test: Dump the stack when test segfaults when in verbose mode
E.g.:
# perf test 26
26: Test mmap thread lookup : FAILED!
# perf test -v 26
26: Test mmap thread lookup :
--- start ---
test child forked, pid 9269
tid = 9269, map = 0x7ff99ff0c000
tid = 9270, map = 0x7ff99ff0b000
tid = 9271, map = 0x7ff99ff0a000
tid = 9272, map = 0x7ff99ff09000
perf: Segmentation fault
Obtained 13 stack frames.
perf(sighandler_dump_stack+0x41) [0x4e3541]
/lib64/libc.so.6(+0x34960) [0x7ff99d5f6960]
perf(thread__put+0x5b) [0x4c6f6b]
perf(machine__process_event+0x14e) [0x4bd37e]
perf(perf_event__synthesize_threads+0x3aa) [0x48678a]
perf(test__mmap_thread_lookup+0x20a) [0x474e0a]
perf() [0x460d56]
perf(cmd_test+0x589) [0x461319]
perf() [0x47c641]
perf(main+0x617) [0x422317]
/lib64/libc.so.6(__libc_start_main+0xf0) [0x7ff99d5e1fe0]
perf() [0x422429]
[(nil)]
test child interrupted
---- end ----
Test mmap thread lookup: FAILED!
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sypazzsl4ptctrmlyi2zcmaj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 11 Dec 2015 19:43:57 +0000 (16:43 -0300)]
perf tools: Use same signal handling strategy as 'record'
I.e. don't exit with the signal number, instead set the signal handler
to the default one and then raise it again.
Noticed while trying to dump the stack at segfaults in the 'perf test'
forked process used to run each test, that inspects signal info at
each test.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5x5r176wnoqxi5p6id05wv9w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 14 Dec 2015 08:31:39 +0000 (09:31 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Fix 'perf top' annotation in --stdio (Namhyung Kim)
- Support hw breakpoint events (mem:0xAddress) in the default output mode in
'perf script' (Wang Nan)
Infrastructure changes:
- Do not hold the hists lock while emitting one specific warning (Namhyung Kim)
- Fetch map names from correct strtab, worked so far because llvm/clang
uses just one string table (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Mon, 14 Dec 2015 08:31:23 +0000 (09:31 +0100)]
Merge tag 'v4.4-rc5' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Mon, 14 Dec 2015 01:42:58 +0000 (17:42 -0800)] 
Linux 4.4-rc5
Peter Zijlstra [Sun, 13 Dec 2015 21:11:16 +0000 (22:11 +0100)]
sched/wait: Fix the signal handling fix
Jan Stancek reported that I wrecked things for him by fixing things for
Vladimir :/
His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which
should not be possible, however my previous patch made this possible by
unconditionally checking signal_pending().
We cannot use current->state as was done previously, because the
instruction after the store to that variable it can be changed. We must
instead pass the initial state along and use that.
Fixes: 68985633bccb ("sched/wait: Fix signal handling in bit wait helpers")
Reported-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Chris Mason <clm@fb.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Chris Mason <clm@fb.com>
Reviewed-by: Paul Turner <pjt@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: tglx@linutronix.de
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 13 Dec 2015 20:46:04 +0000 (12:46 -0800)]
Merge tag 'nfs-for-4.4-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfix from Trond Myklebust:
"SUNRPC: Fix a NFSv4.1 callback channel regression"
* tag 'nfs-for-4.4-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Fix callback channel
Linus Torvalds [Sun, 13 Dec 2015 20:41:10 +0000 (12:41 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixlets from Thomas Gleixner:
"Two trivial fixes which add missing header fileas and forward
declarations so the code will compile even when the magic include
chains are different"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Add missing include for barrier.h
irqchip/gic-v3: Add missing struct device_node declaration
Linus Torvalds [Sun, 13 Dec 2015 20:36:23 +0000 (12:36 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix to unbreak a clocksource driver which has more than 32bit
counter width"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Mmio: remove artificial 32bit limitation
Linus Torvalds [Sun, 13 Dec 2015 20:29:22 +0000 (12:29 -0800)]
Merge tag 'char-misc-4.4-rc5' of git://git./linux/kernel/git/gregkh/char-misc
Pull fpga driver fixes from Greg KH:
"Only two small fpga driver fixes here, both have been in linux-next
for a while, and resolve some reported issues"
* tag 'char-misc-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga manager: Fix firmware resource leak on error
fpga manager: remove label
Linus Torvalds [Sun, 13 Dec 2015 20:24:39 +0000 (12:24 -0800)]
Merge tag 'staging-4.4-rc5' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a few staging and IIO driver fixes for 4.4-rc5.
All of them resolve reported problems and have been in linux-next for
a while. Nothing major here, just small fixes where needed"
* tag 'staging-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: lustre: echo_copy.._lsm() dereferences userland pointers directly
iio: adc: spmi-vadc: add missing of_node_put
iio: fix some warning messages
iio: light: apds9960: correct ->last_busy count
iio: lidar: return -EINVAL on invalid signal
staging: iio: dummy: complete IIO events delivery to userspace
Linus Torvalds [Sun, 13 Dec 2015 19:58:18 +0000 (11:58 -0800)]
Merge tag 'usb-4.4-rc5' of git://git./linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are a number of small USB fixes for 4.4-rc5. All of them have
been in linux-next. The majority are gadget and phy issues, with a
few new quirks and device ids added as well"
* tag 'usb-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (32 commits)
USB: add quirk for devices with broken LPM
xhci: fix usb2 resume timing and races.
usb: musb: fail with error when no DMA controller set
usb: gadget: uvc: fix permissions of configfs attributes
usb: musb: core: Fix pm runtime for deferred probe
usb: phy: msm: fix a possible NULL dereference
USB: host: ohci-at91: fix a crash in ohci_hcd_at91_overcurrent_irq
usb: Quiet down false peer failure messages
usb: xhci: fix config fail of FS hub behind a HS hub with MTT
xhci: Fix memory leak in xhci_pme_acpi_rtd3_enable()
usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message
USB: whci-hcd: add check for dma mapping error
usb: core : hub: Fix BOS 'NULL pointer' kernel panic
USB: quirks: Apply ALWAYS_POLL to all ELAN devices
usb-storage: Fix scsi-sd failure "Invalid field in cdb" for USB adapter JMicron
USB: quirks: Fix another ELAN touchscreen
usb: dwc3: gadget: don't prestart interrupt endpoints
USB: serial: Another Infineon flash loader USB ID
USB: cdc_acm: Ignore Infineon Flash Loader utility
USB: cp210x: Remove CP2110 ID from compatibility list
...
Linus Torvalds [Sun, 13 Dec 2015 00:43:44 +0000 (16:43 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a bunch of small bug fixes for various ARM platforms, nothing
really sticks out this week, most of either fixes bugs in code that
was just added in 4.4, or that has been broken for many years without
anyone noticing.
at91/sama5d2:
- fix sama5de hardware setup of sd/mmc interface
- proper selection of pinctrl drivers. PIO4 is necessary for sama5d2
berlin:
- fix incorrect clock input for SDIO
exynos:
- Fix potential NULL pointer dereference in Exynos PMU driver.
imx:
- Fix vf610 SAI clock configuration bug which is discovered by the
newly added master mode support in SAI audio driver.
- Fix buggy L2 cache latency values in vf610 device trees, which may
cause system hang when cpu runs at a higher frequency.
ixp4xx:
- fix prototypes for readl/writel functions
ls2080a:
- use little-endian register access for GPIO and SDHCI
omap:
- Fix clock source for ARM TWD and global timers on am437x
- Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when
MACH_OMAP3_PANDORA is selected
- Fix SPI DMA handles for dm816x as only some were mapped
- Fix up mbox cells for dm816x to make mailbox usable
pxa:
- use PWM lookup table for all ezx machines
s3c24xx:
- Remove incorrect __init annotation from s3c24xx cpufreq driver
structures.
versatile:
- fix PCI IRQ mapping on Versatile PB"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ls2080a/dts: Add little endian property for GPIO IP block
dt-bindings: define little-endian property for QorIQ GPIO
ARM64: dts: ls2080a: fix eSDHC endianness
ARM: dts: vf610: use reset values for L2 cache latencies
ARM: pxa: use PWM lookup table for all machines
ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1
ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock
ARM: dts: am4372: fix clock source for arm twd and global timers
ARM: at91: fix pinctrl driver selection
ARM: at91/dt: add always-on to 1.8V regulator
ARM: dts: vf610: fix clock definition for SAI2
ARM: imx: clk-vf610: fix SAI clock tree
ARM: ixp4xx: fix read{b,w,l} return types
irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB
ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE
ARM: dts: add dm816x missing spi DT dma handles
ARM: dts: add dm816x missing #mbox-cells
cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init
ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf
Linus Torvalds [Sat, 12 Dec 2015 21:39:59 +0000 (13:39 -0800)]
Merge tag 'powerpc-4.4-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- opal-irqchip: Fix double endian conversion from Alistair Popple
- cxl: Set endianess of kernel contexts from Frederic Barrat
- sbc8641: drop bogus PHY IRQ entries from DTS file from Paul Gortmaker
- Revert "powerpc/eeh: Don't unfreeze PHB PE after reset" from Andrew
Donnellan
* tag 'powerpc-4.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc/eeh: Don't unfreeze PHB PE after reset"
powerpc/sbc8641: drop bogus PHY IRQ entries from DTS file
cxl: Set endianess of kernel contexts
powerpc/opal-irqchip: Fix double endian conversion
Linus Torvalds [Sat, 12 Dec 2015 18:44:49 +0000 (10:44 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MIPS: fix DMA contiguous allocation
sh64: fix __NR_fgetxattr
ocfs2: fix SGID not inherited issue
mm/oom_kill.c: avoid attempting to kill init sharing same memory
drivers/base/memory.c: prohibit offlining of memory blocks with missing sections
tmpfs: fix shmem_evict_inode() warnings on i_blocks
mm/hugetlb.c: fix resv map memory leak for placeholder entries
mm: hugetlb: call huge_pte_alloc() only if ptep is null
kernel: remove stop_machine() Kconfig dependency
mm: kmemleak: mark kmemleak_init prototype as __init
mm: fix kerneldoc on mem_cgroup_replace_page
osd fs: __r4w_get_page rely on PageUptodate for uptodate
MAINTAINERS: make Vladimir co-maintainer of the memory controller
mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress
mm: fix swapped Movable and Reclaimable in /proc/pagetypeinfo
memcg: fix memory.high target
mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
Linus Torvalds [Sat, 12 Dec 2015 18:34:20 +0000 (10:34 -0800)]
Merge branch 'parisc-4.4-3' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Fix the boot crash on Mako machines with Huge Pages, prevent a panic
with SATA controllers (and others) by correctly calculating the IOMMU
space, hook up the mlock2 syscall and drop unneeded code in the parisc
pci code"
* 'parisc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Disable huge pages on Mako machines
parisc: Wire up mlock2 syscall
parisc: Remove unused pcibios_init_bus()
parisc iommu: fix panic due to trying to allocate too large region
Linus Torvalds [Sat, 12 Dec 2015 18:24:00 +0000 (10:24 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"A set of fixes for the current series. This contains:
- A bunch of fixes for lightnvm, should be the last round for this
series. From Matias and Wenwei.
- A writeback detach inode fix from Ilya, also marked for stable.
- A block (though it says SCSI) fix for an OOPS in SCSI runtime power
management.
- Module init error path fixes for null_blk from Minfei"
* 'for-linus' of git://git.kernel.dk/linux-block:
null_blk: Fix error path in module initialization
lightnvm: do not compile in debugging by default
lightnvm: prevent gennvm module unload on use
lightnvm: fix media mgr registration
lightnvm: replace req queue with nvmdev for lld
lightnvm: comments on constants
lightnvm: check mm before use
lightnvm: refactor spin_unlock in gennvm_get_blk
lightnvm: put blks when luns configure failed
lightnvm: use flags in rrpc_get_blk
block: detach bdev inode from its wb in __blkdev_put()
SCSI: Fix NULL pointer dereference in runtime PM
Linus Torvalds [Sat, 12 Dec 2015 18:16:26 +0000 (10:16 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Update the linker script to use L1_CACHE_BYTES instead of hard-coded
64. We recently changed L1_CACHE_BYTES to 128
- Improve race condition reporting on set_pte_at() and change the BUG
to WARN_ONCE. With hardware update of the accessed/dirty state, we
need to ensure that set_pte_at() does not inadvertently override
hardware updated state. The patch also makes the checks ignore
!pte_valid() new entries
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Improve error reporting on set_pte_at() checks
arm64: update linker script to increased L1_CACHE_BYTES value
Qais Yousef [Fri, 11 Dec 2015 21:41:09 +0000 (13:41 -0800)] 
MIPS: fix DMA contiguous allocation
Recent changes to how GFP_ATOMIC is defined seems to have broken the
condition to use mips_alloc_from_contiguous() in
mips_dma_alloc_coherent().
I couldn't bottom out the exact change but I think it's this commit
d0164adc89f6 ("mm, page_alloc: distinguish between being unable to
sleep, unwilling to sleep and avoiding waking kswapd").
GFP_ATOMIC has multiple bits set and the check for !(gfp & GFP_ATOMIC)
isn't enough.
The reason behind this condition is to check whether we can potentially
do a sleeping memory allocation. Use gfpflags_allow_blocking() instead
which should be more robust.
Signed-off-by: Qais Yousef <qais.yousef@imgtec.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry V. Levin [Fri, 11 Dec 2015 21:41:06 +0000 (13:41 -0800)] 
sh64: fix __NR_fgetxattr
According to arch/sh/kernel/syscalls_64.S and common sense, __NR_fgetxattr
has to be defined to 259, but it doesn't. Instead, it's defined to 269,
which is of course used by another syscall, __NR_sched_setaffinity in this
case.
This bug was found by strace test suite.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This page took 0.056634 seconds and 5 git commands to generate.
projects / deliverable / linux.git / log
