Greg Ungerer [Fri, 11 Mar 2011 12:25:44 +0000 (22:25 +1000)]
m68knommu: external interrupt support to ColdFire intc-simr controller
The EDGE Port module of some ColdFire parts using the intc-simr interrupt
controller provides support for 7 external interrupts. These interrupts
go off-chip (that is they are not for internal peripherals). They need
some special handling and have some extra setup registers. Add code to
support them.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Fri, 11 Mar 2011 07:06:58 +0000 (17:06 +1000)]
m68knommu: external interrupt support to ColdFire intc-2 controller
The EDGE Port module of some ColdFire parts using the intc-2 interrupt
controller provides support for 7 external interrupts. These interrupts
go off-chip (that is they are not for internal peripherals). They need
some special handling and have some extra setup registers. Add code to
support them.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Wed, 9 Mar 2011 04:19:08 +0000 (14:19 +1000)]
m68knommu: remove ColdFire CLOCK_DIV config option
The reality is that you do not need the abiltity to configure the
clock divider for ColdFire CPUs. It is a fixed ratio on any given
ColdFire family member. It is not the same for all ColdFire parts,
but it is always the same in a model range. So hard define the divider
for each supported ColdFire CPU type and remove the Kconfig option.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 23:21:24 +0000 (09:21 +1000)]
m68knommu: fix gpio warnings for ColdFire 5407 targets
Fix these compiler warnings:
arch/m68knommu/platform/5407/gpio.c:35:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5407/gpio.c:36:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5407/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 23:19:50 +0000 (09:19 +1000)]
m68knommu: fix gpio warnings for ColdFire 532x targets
Fix these compiler warnings:
arch/m68knommu/platform/532x/gpio.c:35:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/532x/gpio.c:36:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/532x/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/532x/gpio.c:51:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/532x/gpio.c:52:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/532x/gpio.c:53:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/532x/gpio.c:54:3: warning: initialisation makes pointer from integer without a cast
...
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 23:14:49 +0000 (09:14 +1000)]
m68knommu: fix gpio warnings for ColdFire 5307 targets
Fix these compiler warnings:
arch/m68knommu/platform/5307/gpio.c:35:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5307/gpio.c:36:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5307/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 23:13:16 +0000 (09:13 +1000)]
m68knommu: fix gpio warnings for ColdFire 527x targets
Fix these compiler warnings:
arch/m68knommu/platform/527x/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/527x/gpio.c:38:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/527x/gpio.c:39:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/527x/gpio.c:53:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/527x/gpio.c:54:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/527x/gpio.c:55:3: warning: initialisation makes pointer from integer without a cast
...
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 23:07:36 +0000 (09:07 +1000)]
m68knommu: fix gpio warnings for ColdFire 5272 targets
Fix these compiler warnings:
arch/m68knommu/platform/5272/gpio.c:35:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5272/gpio.c:36:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5272/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5272/gpio.c:51:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5272/gpio.c:52:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5272/gpio.c:53:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5272/gpio.c:67:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5272/gpio.c:68:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5272/gpio.c:69:3: warning: initialisation makes pointer from integer without a cast
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 23:05:40 +0000 (09:05 +1000)]
m68knommu: fix gpio warnings for ColdFire 5249 targets
Fix these compiler warnings:
arch/m68knommu/platform/5249/gpio.c:35:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5249/gpio.c:36:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5249/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5249/gpio.c:51:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5249/gpio.c:52:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5249/gpio.c:53:3: warning: initialisation makes pointer from integer without a cast
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 23:03:47 +0000 (09:03 +1000)]
m68knommu: fix gpio warnings for ColdFire 523x targets
Fix these compiler warnings:
arch/m68knommu/platform/523x/gpio.c:36:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/523x/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/523x/gpio.c:38:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/523x/gpio.c:52:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/523x/gpio.c:53:3: warning: initialisation makes pointer from integer without a cast
...
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 22:59:35 +0000 (08:59 +1000)]
m68knommu: fix gpio warnings for ColdFire 520x targets
Fix these compiler warnings:
rch/m68knommu/platform/520x/gpio.c:35:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/520x/gpio.c:36:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/520x/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/520x/gpio.c:51:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/520x/gpio.c:52:3: warning: initialisation makes pointer from integer without a cast
...
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 22:55:53 +0000 (08:55 +1000)]
m68knommu: fix gpio warnings for ColdFire 5206e targets
Fix these compiler warnings:
arch/m68knommu/platform/5206e/gpio.c:35:3: warning: initialisation makes pointer from integer without a cast CC kernel/panic.o
arch/m68knommu/platform/5206e/gpio.c:36:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5206e/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 22:53:30 +0000 (08:53 +1000)]
m68knommu: fix gpio warnings for ColdFire 5206 targets
Fix these compiler warnings:
arch/m68knommu/platform/5206/gpio.c:35:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5206/gpio.c:36:3: warning: initialisation makes pointer from integer without a cast
arch/m68knommu/platform/5206/gpio.c:37:3: warning: initialisation makes pointer from integer without a cast
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Alexander Kurz [Sun, 20 Feb 2011 21:45:33 +0000 (22:45 +0100)]
m68knommu: fixing compiler warnings
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Mon, 7 Mar 2011 13:00:04 +0000 (23:00 +1000)]
m68knommu: limit interrupts supported by ColdFire intc-simr driver
The intc-simr interrupt controller on some ColdFire CPUs has a set range of
interrupts its supports (64 through 128 or 192 depending on model). We
shouldn't be setting this handler for every possible interrupt from 0 to
255. Set more appropriate limits, and this means we can drop the interrupt
number check in the mask and unmask routines.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Mon, 7 Mar 2011 07:42:28 +0000 (17:42 +1000)]
m68knommu: move some init code out of unmask routine for ColdFire intc-2
Use a proper irq_startup() routine to intialize the interrupt priority
and level register in the ColdFire intc-2 controller code. We shouldn't
be checking if the priority/level has been set on every unmask operation.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Mon, 7 Mar 2011 07:21:43 +0000 (17:21 +1000)]
m68knommu: limit interrupts supported by ColdFire intc-2 driver
The intc-2 interrupt controller on some ColdFire CPUs has a set range of
interrupts its supports (64 through 128 or 192 depending on model). We
shouldn't be setting this handler for every possible interrupt from 0 to
255. Set more appropriate limits, and this means we can drop the interrupt
number check in the mask and unmask routines.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sun, 6 Mar 2011 13:20:19 +0000 (23:20 +1000)]
m68knommu: add basic support for the ColdFire based FireBee board
The FireBee is a ColdFire 5475 based board. Add a configuration option
to support it, and the basic platform flash layout code.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sun, 6 Mar 2011 11:53:28 +0000 (21:53 +1000)]
m68knommu: make ColdFire internal peripheral region configurable
Most ColdFire CPUs have an internal peripheral set that can be mapped at
a user selectable address. Different ColdFire parts either use an MBAR
register of an IPSBAR register to map the peripheral region. Most boards
use the Freescale default mappings - but not all.
Make the setting of the MBAR or IPSBAR register configurable. And only make
the selection available on the appropriate ColdFire CPU types.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 15:01:31 +0000 (01:01 +1000)]
m68knommu: clean up definitions of ColdFire peripheral base registers
Different ColdFire CPUs have different ways of defining where their
internal peripheral registers sit in their address space. Some use an
MBAR register, some use and IPSBAR register, some have a fixed mapping.
Now that most of the peripheral address definitions have been cleaned up
we can clean up the setting of the MBAR and IPSBAR defines to limit them
to just where they are needed (and where they actually exist).
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sun, 6 Mar 2011 13:01:46 +0000 (23:01 +1000)]
m68knommu: clean up use of MBAR for DRAM registers on ColdFire start
In some of the RAM size autodetection code on ColdFire CPU startup
we reference DRAM registers relative to the MBAR register. Not all of
the supported ColdFire CPUs have an MBAR, and currently this works
because we fake an MBAR address on those registers. In an effort to
clean this up, and eventually remove the fake MBAR setting make the
DRAM register address definitions actually contain the MBAR (or IPSBAR
as appropriate) value as required.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 8 Mar 2011 23:57:14 +0000 (09:57 +1000)]
m68knommu: remove use of MBAR in old-style ColdFire timer
Not all ColdFire CPUs that use the old style timer hardware module use
an MBAR set peripheral region. Move the TIMER base address defines to the
per-CPU header files where we can set it correctly based on how the
peripherals are mapped - instead of using a fake MBAR for some platforms.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 14:54:36 +0000 (00:54 +1000)]
m68knommu: move ColdFire DMA register addresses to per-cpu headers
The base addresses of the ColdFire DMA unit registers belong with
all the other address definitions in the per-cpu headers. The current
definitions assume they are relative to an MBAR register. Not all
ColdFire CPUs have an MBAR register. A clean address define can only
be acheived in the per-cpu headers along with all the other chips
peripheral base addresses.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 14:20:01 +0000 (00:20 +1000)]
m68knommu: remove use of MBAR value for ColdFire 528x peripheral addressing
The ColdFire 528x family of CPUs does not have an MBAR register, so don't
define its peripheral addresses relative to one. Its internal peripherals
are relative to the IPSBAR register, so make sure to use that.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 14:13:17 +0000 (00:13 +1000)]
m68knommu: remove use of MBAR value for ColdFire 527x peripheral addressing
The ColdFire 527x family of CPUs does not have an MBAR register, so don't
define its peripheral addresses relative to one. Its internal peripherals
are relative to the IPSBAR register, so make sure to use that.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 14:05:29 +0000 (00:05 +1000)]
m68knommu: remove use of MBAR value for ColdFire 523x peripheral addressing
The ColdFire 523x family of CPUs does not have an MBAR register, so don't
define its peripheral addresses relative to one. Its internal peripherals
are relative to the IPSBAR register, so make sure to use that.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 13:50:37 +0000 (23:50 +1000)]
m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs
The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses.
They do not use the setable peripheral address registers like the MBAR
and IPSBAR used on many other ColdFire parts. Don't use fake values
of MBAR and IPSBAR when using peripheral addresses for them, there
is no need to.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 13:32:35 +0000 (23:32 +1000)]
m68knommu: move ColdFire PIT timer base addresses
The PIT hardware timer module used in some ColdFire CPU's is not always
addressed relative to an IPSBAR register. Parts like the ColdFire 5207 and
5208 have fixed peripheral addresses. So lets not define the register
addresses of the PIT relative to an IPSBAR definition. Move the base
address definitions into the per-part headers. This is a lot more consistent
since all the other peripheral base addresses are defined in the per-part
header files already.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 12:48:52 +0000 (22:48 +1000)]
m68knommu: remove bogus definition of MBAR for ColdFire 532x family
Remove the bogus definition of the MBAR register for the ColdFire 532x
family. It doesn't have an MBAR register, its peripheral registers are
at fixed addresses and are not relative to a settable base.
All the code that relyed on this definition existing has been cleaned
up. The register address definitions now include the base as required.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 12:17:17 +0000 (22:17 +1000)]
m68knommu: remove kludge seting of MCF_IPSBAR for ColdFire 54xx
The ColdFire 54xx family shares the same interrupt controller used
on the 523x, 527x and 528x ColdFire parts, but it isn't offset
relative to the IPSBAR register. The 54xx doesn't have an IPSBAR
register.
By including the base address of the peripheral registers in the register
definitions (MCFICM_INTC0 and MCFICM_INTC1 in this case) we can avoid
having to define a fake IPSBAR for the 54xx. And this makes the register
address definitions of these more consistent, the majority of the other
register address defines include the peripheral base address already.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Sat, 5 Mar 2011 11:43:50 +0000 (21:43 +1000)]
m68knommu: move ColdFire 5249 MBAR2 definition
The MBAR2 register is only used on the ColdFire 5249 part, so move its
definition out of the common coldfire.h and into the 5249 support header.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:14 +0000 (23:39 +0000)]
m68knommu: Select GENERIC_HARDIRQS_NO_DEPRECATED
All chips converted and proper accessor functions used.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:14 +0000 (23:39 +0000)]
m68knommu: Use proper irq_desc accessors in
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:14 +0000 (23:39 +0000)]
m68knommu: Convert 5249 intc irq_chip to new functions
/me idly wonders what sets the handlers for this chip.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:28 +0000 (23:39 +0000)]
m68knommu: Convert 5272 intc irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:14 +0000 (23:39 +0000)]
m68knommu: Convert 68360 ints irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:14 +0000 (23:39 +0000)]
m68knommu: Convert 68328 ints irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:14 +0000 (23:39 +0000)]
m68knommu: Convert coldfire intc-simr irq_chip to new
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:14 +0000 (23:39 +0000)]
m68knommu: Convert coldfire intc-2 irq_chip to new
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:14 +0000 (23:39 +0000)]
m68knommu: Convert coldfire intc irq_chip to new
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Thomas Gleixner [Sun, 6 Feb 2011 23:39:14 +0000 (23:39 +0000)]
m68knommu: 5772: Replace private irq flow handler
That handler lacks the minimal checks for action being zero etc. Keep
the weird flow - ack before handling - intact and call into
handle_simple_irq which does the right thing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
LKML-Reference: <
20110202212552.
413849952@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Linus Torvalds [Tue, 15 Mar 2011 01:20:32 +0000 (18:20 -0700)]
Linux 2.6.38
Linus Torvalds [Mon, 14 Mar 2011 22:20:39 +0000 (15:20 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/dhowells/linux-2.6-mn10300
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300:
MN10300: atomic_read() should ensure it emits a load
MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist
MN10300: Proper use of macros get_user() in the case of incremented pointers
Linus Torvalds [Mon, 14 Mar 2011 22:20:12 +0000 (15:20 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits)
MIPS: Alchemy: Fix reset for MTX-1 and XXS1500
MIPS: MTX-1: Make au1000_eth probe all PHY addresses
MIPS: Jz4740: Add HAVE_CLK
MIPS: Move idle task creation to work queue
MIPS, Perf-events: Use unsigned delta for right shift in event update
MIPS, Perf-events: Work with the new callchain interface
MIPS, Perf-events: Fix event check in validate_event()
MIPS, Perf-events: Work with the new PMU interface
MIPS, Perf-events: Work with irq_work
MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y
MIPS: Loongson: Fix potentially wrong string handling
MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c
MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h
MIPS: Remove unused code from arch/mips/kernel/syscall.c
MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c
MIPS: MSP: Fix MSP71xx bpci interrupt handler return value
MIPS: Select R4K timer lib for all MSP platforms
MIPS: Loongson: Remove ad-hoc cmdline default
MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).
MIPS: Add an unreachable return statement to satisfy buggy GCCs.
...
Linus Torvalds [Mon, 14 Mar 2011 22:19:09 +0000 (15:19 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: ce4100: Set pci ops via callback instead of module init
x86/mm: Fix pgd_lock deadlock
x86/mm: Handle mm_fault_error() in kernel space
x86: Don't check for BIOS corruption in first 64K when there's no need to
Linus Torvalds [Mon, 14 Mar 2011 22:17:07 +0000 (15:17 -0700)]
Revert "oom: oom_kill_process: fix the child_points logic"
This reverts the parent commit. I hate doing that, but it's generating
some discussion ("half of it is right"), and since I am planning on
doing the 2.6.38 release later today we can punt it to stable if
required. Let's not rock the boat right now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Mon, 14 Mar 2011 19:05:30 +0000 (20:05 +0100)]
oom: oom_kill_process: fix the child_points logic
oom_kill_process() starts with victim_points == 0. This means that
(most likely) any child has more points and can be killed erroneously.
Also, "children has a different mm" doesn't match the reality, we should
check child->mm != t->mm. This check is not exactly correct if t->mm ==
NULL but this doesn't really matter, oom_kill_task() will kill them
anyway.
Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong
too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Fainelli [Mon, 21 Feb 2011 13:28:02 +0000 (14:28 +0100)]
MIPS: Alchemy: Fix reset for MTX-1 and XXS1500
Since commit
32fd6901 (MIPS: Alchemy: get rid of common/reset.c)
Alchemy-based boards use their own reset function. For MTX-1 and XXS1500,
the reset function pokes at the BCSR.SYSTEM_RESET register, but this does
not work. According to Bruno Randolf, this was not tested when written.
Previously, the generic au1000_restart() routine called the board specific
reset function, which for MTX-1 and XXS1500 did not work, but finally made
a jump to the reset vector, which really triggers a system restart. Fix
reboot for both targets by jumping to the reset vector.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2093/
Acked-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sun, 27 Feb 2011 18:53:53 +0000 (19:53 +0100)]
MIPS: MTX-1: Make au1000_eth probe all PHY addresses
When au1000_eth probes the MII bus for PHY address, if we do not set
au1000_eth platform data's phy_search_highest_address, the MII probing
logic will exit early and will assume a valid PHY is found at address 0.
For MTX-1, the PHY is at address 31, and without this patch, the link
detection/speed/duplex would not work correctly.
CC: stable@kernel.org
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2111/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maurus Cuelenaere [Mon, 28 Feb 2011 23:20:01 +0000 (00:20 +0100)]
MIPS: Jz4740: Add HAVE_CLK
Jz4740 supports the clock framework but doesn't have HAVE_CLK defined,
so define it!
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2112/
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maksim Rayskiy [Sat, 12 Feb 2011 18:21:32 +0000 (10:21 -0800)]
MIPS: Move idle task creation to work queue
To avoid forking usermode thread when creating an idle task, move fork_idle
to a work queue.
If kernel starts with maxcpus= option which does not bring all available
cpus online at boot time, idle tasks for offline cpus are not created. If
later offline cpus are hotplugged through sysfs, __cpu_up is called in
the context of the user task, and fork_idle copies its non-zero mm
pointer. This causes BUG() in per_cpu_trap_init.
This also avoids issues with resource limits of the CPU writing to sysfs,
containers, maybe others.
Signed-off-by: Maksim Rayskiy <mrayskiy@broadcom.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2070/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:21 +0000 (16:19 +0800)]
MIPS, Perf-events: Use unsigned delta for right shift in event update
Leverage the commit for ARM by Will Deacon:
-
446a5a8b1eb91a6990e5c8fe29f14e7a95b69132
ARM: 6205/1: perf: ensure counter delta is treated as unsigned
Hardware performance counters on ARM are 32-bits wide but atomic64_t
variables are used to represent counter data in the hw_perf_event structure.
The armpmu_event_update function right-shifts a signed 64-bit delta variable
and adds the result to the event count. This can lead to shifting in sign-bits
if the MSB of the 32-bit counter value is set. This results in perf output
such as:
Performance counter stats for 'sleep 20':
18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000
7783773 instructions # 0.000 IPC
465 context-switches
161 page-faults
1172393 branches
20.
154242147 seconds time elapsed
This patch ensures that the delta value is treated as unsigned so that the
right shift sets the upper bits to zero.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Patchwork: http://patchwork.linux-mips.org/patch/2015/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:20 +0000 (16:19 +0800)]
MIPS, Perf-events: Work with the new callchain interface
This is the MIPS part of the following commits by Frederic Weisbecker:
-
f72c1a931e311bb7780fee19e41a89ac42cab50e
perf: Factorize callchain context handling
Store the kernel and user contexts from the generic layer instead
of archs, this gathers some repetitive code.
-
56962b4449af34070bb1994621ef4f0265eed4d8
perf: Generalize some arch callchain code
- Most archs use one callchain buffer per cpu, except x86 that needs
to deal with NMIs. Provide a default perf_callchain_buffer()
implementation that x86 overrides.
- Centralize all the kernel/user regs handling and invoke new arch
handlers from there: perf_callchain_user() / perf_callchain_kernel()
That avoid all the user_mode(), current->mm checks and so...
- Invert some parameters in perf_callchain_*() helpers: entry to the
left, regs to the right, following the traditional (dst, src).
-
70791ce9ba68a5921c9905ef05d23f62a90bc10c
perf: Generalize callchain_store()
callchain_store() is the same on every archs, inline it in
perf_event.h and rename it to perf_callchain_store() to avoid
any collision.
This removes repetitive code.
-
c1a65932fd7216fdc9a0db8bbffe1d47842f862c
perf: Drop unappropriate tests on arch callchains
Drop the TASK_RUNNING test on user tasks for callchains as
this check doesn't seem to make any sense.
Also remove the tests for !current that is not supposed to
happen and current->pid as this should be handled at the
generic level, with exclude_idle attribute.
Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: dengcheng.zhu@gmail.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Patchwork: http://patchwork.linux-mips.org/patch/2014/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:19 +0000 (16:19 +0800)]
MIPS, Perf-events: Fix event check in validate_event()
Ignore events that are in off/error state or belong to a different PMU.
This patch originates from the following commit for ARM by Will Deacon:
-
65b4711ff513767341aa1915c822de6ec0de65cb
ARM: 6352/1: perf: fix event validation
The validate_event function in the ARM perf events backend has the
following problems:
1.) Events that are disabled count towards the cost.
2.) Events associated with other PMUs [for example, software events or
breakpoints] do not count towards the cost, but do fail validation,
causing the group to fail.
This patch changes validate_event so that it ignores events in the
PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: dengcheng.zhu@gmail.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Cc: ddaney@caviumnetworks.com
Patchwork: http://patchwork.linux-mips.org/patch/2013/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:18 +0000 (16:19 +0800)]
MIPS, Perf-events: Work with the new PMU interface
This is the MIPS part of the following commits by Peter Zijlstra:
-
a4eaf7f14675cb512d69f0c928055e73d0c6d252
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
For MIPSXX, the stopped state is implemented in the way of 1.b as above.
-
33696fc0d141bbbcb12f75b69608ea83282e3117
perf: Per PMU disable
Changes perf_disable() into perf_pmu_disable().
-
24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7
perf: Reduce perf_disable() usage
Since the current perf_disable() usage is only an optimization,
remove it for now. This eases the removal of the __weak
hw_perf_enable() interface.
-
b0a873ebbf87bf38bf70b5e39a7cadc96099fa13
perf: Register PMU implementations
Simple registration interface for struct pmu, this provides the
infrastructure for removing all the weak functions.
-
51b0fe39549a04858001922919ab355dee9bdfcf
perf: Deconstify struct pmu
sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"`
Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: dengcheng.zhu@gmail.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Cc: ddaney@caviumnetworks.com
Patchwork: http://patchwork.linux-mips.org/patch/2012/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:17 +0000 (16:19 +0800)]
MIPS, Perf-events: Work with irq_work
This is the MIPS part of the following commit by Peter Zijlstra:
-
e360adbe29241a0194e10e20595360dd7b98a2b3
irq_work: Add generic hardirq context callbacks
Provide a mechanism that allows running code in IRQ context. It is
most useful for NMI code that needs to interact with the rest of the
system -- like wakeup a task to drain buffers.
Perf currently has such a mechanism, so extract that and provide it as
a generic feature, independent of perf so that others may also
benefit.
The IRQ context callback is generated through self-IPIs where
possible, or on architectures like powerpc the decrementer (the
built-in timer facility) is set to generate an interrupt immediately.
Architectures that don't have anything like this get to do with a
callback from the timer tick. These architectures can call
irq_work_run() at the tail of any IRQ handlers that might enqueue such
work (like the perf IRQ handler) to avoid undue latencies in
processing the work.
For MIPSXX, we need to call irq_work_run() at the tail of the perf IRQ
handler as described above.
Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com,
Patchwork: http://patchwork.linux-mips.org/patch/2011/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Mon, 7 Feb 2011 02:31:36 +0000 (11:31 +0900)]
MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2055/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Stefan Weil [Sun, 30 Jan 2011 20:41:44 +0000 (21:41 +0100)]
MIPS: Loongson: Fix potentially wrong string handling
This error was reported by cppcheck:
arch/mips/loongson/common/machtype.c:56: error: Dangerous usage of 'str' (strncpy doesn't always 0-terminate it)
If strncpy copied MACHTYPE_LEN bytes, the destination string str
was not terminated.
The patch adds one more byte to str and makes sure that this byte is
always 0.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2053/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Mon, 24 Jan 2011 22:51:37 +0000 (14:51 -0800)]
MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c
Under some combinations of CONFIG_*, lastpfn in page_is_ram is 'set
but not used'. Mark it as __maybe_unused to quiet the warning/error.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2033/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Mon, 24 Jan 2011 22:51:36 +0000 (14:51 -0800)]
MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h
GCC-4.6 can find more unused code than previous versions could.
In the case of arch/mips/math-emu/ieee754int.h, the COMPXSP and
COMPXDP macros are used in several places, but a couple of them leave
xs unused. The easiest thing to do is mark it as __maybe_unused to
quiet the warning.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2032/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Mon, 24 Jan 2011 22:51:35 +0000 (14:51 -0800)]
MIPS: Remove unused code from arch/mips/kernel/syscall.c
The variable arg3 in _sys_sysmips() is unused. Remove it.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2034/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Mon, 24 Jan 2011 22:51:34 +0000 (14:51 -0800)]
MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c
GCC-4.6 can find more unused code than previous versions could.
In the case of protected_restore_fp_context{,32}, the variable tmp is
really used. Its use is tricky in that we really care about the side
effects of the __put_user() calls. So we must mark tmp with
__maybe_unused to quiet the warning.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2035/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Thu, 18 Nov 2010 10:32:50 +0000 (16:02 +0530)]
MIPS: MSP: Fix MSP71xx bpci interrupt handler return value
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: Ben Hutchings <ben@decadent.org.uk>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1804/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Thu, 18 Nov 2010 08:12:28 +0000 (13:42 +0530)]
MIPS: Select R4K timer lib for all MSP platforms
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1803/
Tested-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Robert Millan [Sun, 7 Nov 2010 12:38:29 +0000 (13:38 +0100)]
MIPS: Loongson: Remove ad-hoc cmdline default
Loongson builds have an ad-hoc cmdline default of "console=ttyS0,115200
root=/dev/hda1". These settings come from a vendor; I remember builds
from Lemote branch requiring a "console=tty" override in order to get a
working console.
At least on Yeeloong, they're particularly useless: there's no external
serial port, and the IDE drive is now recognised as /dev/sda.
Signed-off-by: Robert Millan <rmh@gnu.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1759/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Stefan Oberhumer [Mon, 17 Jan 2011 08:19:53 +0000 (09:19 +0100)]
MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).
The sysmips(MIPS_FIXADE, ...) case contains an obvious copy-and-paste
error in the handling of the TIF_LOGADE flag. Fix that
Patchwork: https://patchwork.linux-mips.org/patch/1997/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Wed, 19 Jan 2011 23:24:42 +0000 (15:24 -0800)]
MIPS: Add an unreachable return statement to satisfy buggy GCCs.
It was reported that GCC-4.3.3 (with CodeSourcery extensions) fails
without this.
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2010/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Wu Zhangjin [Fri, 21 Jan 2011 18:01:53 +0000 (02:01 +0800)]
MIPS, Tracing: Fix set_graph_function of function graph tracer
trace.func should be set to the recorded ip of the mcount calling site
in the __mcount_loc section to filter the function entries configured
through the tracing/set_graph_function interface, but before, this is
set to the self_ra(the return address of mcount), which has made
set_graph_function not work as expected.
This fixes it via calculating the right recorded ip in the __mcount_loc
section and assign it to trace.func.
Reported-by: Zhiping Zhong <xzhong86@163.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2017/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Wu Zhangjin [Wed, 19 Jan 2011 19:28:31 +0000 (03:28 +0800)]
MIPS, Tracing: Clean up ftrace_make_nop()
This moves the comments out of ftrace_make_nop() and cleans it. At the
same time, a macro MCOUNT_OFFSET_INSNS is defined for sharing with the
next patch.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2008/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Wu Zhangjin [Wed, 19 Jan 2011 19:28:30 +0000 (03:28 +0800)]
MIPS, Tracing: Clean up prepare_ftrace_return()
The old prepare_ftrace_return() for MIPS is confused and have introduced
some problem. This patch cleans up the names of the arguments, variables
and related functions.
For MIPS, the 2nd argument of prepare_ftrace_return() is not really the
'selfpc' described in ftrace-design.txt but instead it is the self
return address. This did break the compatibility of the generic
interface but really reduced one unneeded calculation for to get the
current function name, the parent return address and the self return
address are enough, no need to tranform the self return address to the
self address.
But set_graph_function of function graph tracer is an exception, it does
need the 2nd argument of prepare_ftrace_return() as 'selfpc', for it
will use 'selfpc' to match user's configuration of function graph
entries, but in reality, it doesn't need the 'selfpc' but the recorded
ip address of the mcount calling site in the __mcount_loc section. So,
the 2nd argument of prepare_ftrace_return() is not important, the real
requirement is the right recorded ip address should be calculated and
assign to trace.func, this will be fixed in the next patches.
Reported-by: Zhiping Zhong <xzhong86@163.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2007/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Wu Zhangjin [Wed, 19 Jan 2011 19:28:29 +0000 (03:28 +0800)]
MIPS, Tracing: Substitute in_kernel_space() for in_module()
The old in_module() may not work in some situations(e.g. when module &
kernel are in the same address space when CONFIG_MAPPED_KERNEL=y), The
in_kernel_space() is more generic and it is also easy to be implemented
via cloning the existing core_kernel_text(), so, replace the in_module()
with in_kernel_space().
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2005/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Wu Zhangjin [Wed, 19 Jan 2011 19:28:27 +0000 (03:28 +0800)]
MIPS, Tracing: Speed up function graph tracer
This simply moves the "ip-=4" statement down to the end of the do { ...
} while (...); loop, which reduces one unneeded subtration and the
subsequent memory loading and comparison.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2006/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Thomas Gleixner [Sun, 23 Jan 2011 15:17:00 +0000 (15:17 +0000)]
MIPS: Replace deprecated spinlock initialization
SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2025/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Linus Torvalds [Mon, 14 Mar 2011 18:19:50 +0000 (11:19 -0700)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: NFSROOT should default to "proto=udp"
nfs4: remove duplicated #include
NFSv4: nfs4_state_mark_reclaim_nograce() should be static
NFSv4: Fix the setlk error handler
NFSv4.1: Fix the handling of the SEQUENCE status bits
NFSv4/4.1: Fix nfs4_schedule_state_recovery abuses
NFSv4.1 reclaim complete must wait for completion
NFSv4: remove duplicate clientid in struct nfs_client
NFSv4.1: Retry CREATE_SESSION on NFS4ERR_DELAY
sunrpc: Propagate errors from xs_bind() through xs_create_sock()
(try3-resend) Fix nfs_compat_user_ino64 so it doesn't cause problems if bit 31 or 63 are set in fileid
nfs: fix compilation warning
nfs: add kmalloc return value check in decode_and_add_ds
SUNRPC: Remove resource leak in svc_rdma_send_error()
nfs: close NFSv4 COMMIT vs. CLOSE race
SUNRPC: Close a race in __rpc_wait_for_completion_task()
Linus Torvalds [Mon, 14 Mar 2011 18:17:43 +0000 (11:17 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon: fix problem with changing active VRAM size. (v2)
Linus Torvalds [Mon, 14 Mar 2011 17:15:43 +0000 (10:15 -0700)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
watchdog: hpwdt: eliminate section mismatch warning
watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2
watchdog: sch311x_wdt: fix printk condition
watchdog: sch311x_wdt: Fix LDN active check
watchdog: cpwd: Fix buffer-overflow
Timo Warns [Mon, 14 Mar 2011 13:59:33 +0000 (14:59 +0100)]
Fix corrupted OSF partition table parsing
The kernel automatically evaluates partition tables of storage devices.
The code for evaluating OSF partitions contains a bug that leaks data
from kernel heap memory to userspace for certain corrupted OSF
partitions.
In more detail:
for (i = 0 ; i < le16_to_cpu(label->d_npartitions); i++, partition++) {
iterates from 0 to d_npartitions - 1, where d_npartitions is read from
the partition table without validation and partition is a pointer to an
array of at most 8 d_partitions.
Add the proper and obvious validation.
Signed-off-by: Timo Warns <warns@pre-sense.de>
Cc: stable@kernel.org
[ Changed the patch trivially to not repeat the whole le16_to_cpu()
thing, and to use an explicit constant for the magic value '8' ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Mon, 14 Mar 2011 08:08:47 +0000 (01:08 -0700)]
thp+memcg-numa: fix BUG at include/linux/mm.h:370!
THP's collapse_huge_page() has an understandable but ugly difference
in when its huge page is allocated: inside if NUMA but outside if not.
It's hardly surprising that the memcg failure path forgot that, freeing
the page in the non-NUMA case, then hitting a VM_BUG_ON in get_page()
(or even worse, using the freed page).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Mon, 14 Mar 2011 14:49:44 +0000 (14:49 +0000)]
MN10300: atomic_read() should ensure it emits a load
atomic_read() needs to ensure that it emits a load (which it can do by using
ACCESS_ONCE()).
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 14 Mar 2011 14:45:29 +0000 (14:45 +0000)]
MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist
The invalidate-only versions of flush_icache_*range() are trying sending the
SMP_ICACHE_INV_FLUSH_RANGE IPI command in SMP kernels when they should be
sending SMP_ICACHE_INV_RANGE as the former does not exist.
Signed-off-by: David Howells <dhowells@redhat.com>
Tkhai Kirill [Mon, 14 Mar 2011 13:27:46 +0000 (13:27 +0000)]
MN10300: Proper use of macros get_user() in the case of incremented pointers
Using __get_user_check(x, ptr++, size) leads to double increment of pointer.
This macro uses the macro get_user directly, which itself is used in this way
(get_user(x, ptr++)) in some functions of the kernel. The patch fixes the
error.
Reported-by: Tkhai Kirill <tkhai@yandex.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
Sebastian Andrzej Siewior [Mon, 14 Mar 2011 09:33:40 +0000 (10:33 +0100)]
x86: ce4100: Set pci ops via callback instead of module init
Setting the pci ops on subsys initcall unconditionally will break
multi platform kernels on anything except ce4100.
Use x86_init.pci.init ops to call this only on real ce4100 platforms.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: sodaville@linutronix.de
LKML-Reference: <
20110314093340.GA21026@www.tglx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Axel Lin [Wed, 2 Mar 2011 03:49:44 +0000 (11:49 +0800)]
watchdog: hpwdt: eliminate section mismatch warning
hpwdt_init_nmi_decoding() is called in hpwdt_init_one error handling,
thus remove the __devexit annotation of hpwdt_exit_nmi_decoding().
This patch fixes below warning:
WARNING: drivers/watchdog/hpwdt.o(.devinit.text+0x36f): Section mismatch in reference from the function hpwdt_init_one() to the function .devexit.text:hpwdt_exit_nmi_decoding()
The function __devinit hpwdt_init_one() references
a function __devexit hpwdt_exit_nmi_decoding().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
hpwdt_exit_nmi_decoding() so it may be used outside an exit section.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Mon, 21 Feb 2011 19:28:58 +0000 (19:28 +0000)]
watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2
outb_p(c || 0x01, WDT_EFDR); -> || should be |
Reported-By: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Dan Carpenter [Wed, 23 Feb 2011 20:26:01 +0000 (23:26 +0300)]
watchdog: sch311x_wdt: fix printk condition
"==" has higher precedence than "&". Since
if (sch311x_sio_inb(sio_config_port, 0x30) & (0x01 == 0)) is always
false the message is never printed.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Mon, 21 Feb 2011 19:09:40 +0000 (19:09 +0000)]
watchdog: sch311x_wdt: Fix LDN active check
if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0) -> && should be &
Reported-By: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Mon, 21 Feb 2011 10:52:43 +0000 (10:52 +0000)]
watchdog: cpwd: Fix buffer-overflow
cppcheck-1.47 reports:
[drivers/watchdog/cpwd.c:650]: (error) Buffer access out-of-bounds: p.devs
The source code is
for (i = 0; i < 4; i++) {
misc_deregister(&p->devs[i].misc);
where devs is defined as WD_NUMDEVS big and WD_NUMDEVS is equal to 3.
So the 4 should be a 3 or WD_NUMDEVS.
Reported-By: David Binderman
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Dave Airlie [Sun, 13 Mar 2011 23:47:24 +0000 (09:47 +1000)]
drm/radeon: fix problem with changing active VRAM size. (v2)
So we used to use lpfn directly to restrict VRAM when we couldn't
access the unmappable area, however this was removed in
93225b0d7bc030f4a93165347a65893685822d70 as it also restricted
the gtt placements. However it was only later noticed that this
broke on some hw.
This removes the active_vram_size, and just explicitly sets it
when it changes, TTM/drm_mm will always use the real_vram_size,
and the active vram size will change the TTM size used for lpfn
setting.
We should re-work the fpfn/lpfn to per-placement at some point
I suspect, but that is too late for this kernel.
Hopefully this addresses:
https://bugs.freedesktop.org/show_bug.cgi?id=35254
v2: fix reported useful VRAM size to userspace to be correct.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Al Viro [Sun, 13 Mar 2011 23:24:46 +0000 (23:24 +0000)]
compat breakage in preadv() and pwritev()
Fix for a dumb preadv()/pwritev() compat bug - unlike the native
variants, the compat_... ones forget to check FMODE_P{READ,WRITE}, so
e.g. on pipe the native preadv() will fail with -ESPIPE and compat one
will act as readv() and succeed.
Not critical, but it's a clear bug with trivial fix, so IMO it's OK for
-final.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 13 Mar 2011 23:01:11 +0000 (16:01 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
hwmon/f71882fg: Set platform drvdata to NULL later
hwmon/f71882fg: Fix a typo in a comment
Linus Torvalds [Sun, 13 Mar 2011 23:00:49 +0000 (16:00 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: break out of shrink_delalloc earlier
btrfs: fix not enough reserved space
btrfs: fix dip leak
Btrfs: make sure not to return overlapping extents to fiemap
Btrfs: deal with short returns from copy_from_user
Btrfs: fix regressions in copy_from_user handling
Linus Torvalds [Sun, 13 Mar 2011 23:00:28 +0000 (16:00 -0700)]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] target: Fix t_transport_aborted handling in LUN_RESET + active I/O shutdown
Michal Marek [Fri, 11 Mar 2011 21:34:47 +0000 (22:34 +0100)]
kbuild: Fix computing srcversion for modules
Recent change to fixdep:
commit
b7bd182176960fdd139486cadb9962b39f8a2b50
Author: Michal Marek <mmarek@suse.cz>
Date: Thu Feb 17 15:13:54 2011 +0100
fixdep: Do not record dependency on the source file itself
changed the format of the *.cmd files without realizing that it is also
used by modpost. Put the path to the source file to the file back, in a
special variable, so that modpost sees all source files when calculating
srcversion for modules.
Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 13 Mar 2011 22:56:22 +0000 (15:56 -0700)]
Merge git://git.infradead.org/users/dwmw2/mtd-2.6.38
* git://git.infradead.org/users/dwmw2/mtd-2.6.38:
mtd: add "platform:" prefix for platform modalias
mtd: mtd_blkdevs: fix double free on error path
mtd: amd76xrom: fix oops at boot when resources are not available
mtd: fix race in cfi_cmdset_0001 driver
mtd: jedec_probe: initialise make sector erase command variable
mtd: jedec_probe: Change variable name from cfi_p to cfi
Linus Torvalds [Sun, 13 Mar 2011 22:52:48 +0000 (15:52 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon: fix page flipping hangs on r300/r400
drm/radeon: add pageflip hooks for fusion
Linus Torvalds [Sun, 13 Mar 2011 22:50:37 +0000 (15:50 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: fix mis-synchronisation in blkdev_issue_zeroout()
Linus Torvalds [Sun, 13 Mar 2011 22:50:01 +0000 (15:50 -0700)]
Merge branch 'fix/asoc' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ASoC: Ensure WM8958 gets all WM8994 late revision widgets
ASoC: Fix typo in late revision WM8994 DAC2R name
ASoC: Use the correct DAPM context when cleaning up final widget set
ASoC: Fix broken bitfield definitions in WM8978
ASoC: AM3517: Update codec name after multi-component update
Axel Lin [Fri, 11 Mar 2011 22:58:30 +0000 (14:58 -0800)]
gpio: add MODULE_DEVICE_TABLE
The device table is required to load modules based on modaliases.
After adding MODULE_DEVICE_TABLE, below entries will be added to
modules.pcimap:
pch_gpio 0x00008086 0x00008803 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
ml_ioh_gpio 0x000010db 0x0000802e 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Fri, 11 Mar 2011 22:58:29 +0000 (14:58 -0800)]
thp: fix page_referenced to modify mapcount/vm_flags only if page is found
When vmscan.c calls page_referenced(), if an anon page was created
before a process forked, rmap will search for it in both of the
processes, even though one of them might have since broken COW.
If the child process mlocks the vma where the COWed page belongs to,
page_referenced() running on the page mapped by the parent would lead to
*vm_flags getting VM_LOCKED set erroneously (leading to the references
on the parent page being ignored and evicting the parent page too
early).
*mapcount would also be decremented by page_referenced_one even if the
page wasn't found by page_check_address.
This also lets pmdp_clear_flush_young_notify() go ahead on a
pmd_trans_splitting() pmd.
We hold the page_table_lock so __split_huge_page_map() must wait the
pmdp_clear_flush_young_notify() to complete before it can modify the
pmd. The pmd is also still mapped in userland so the young bit may
materialize through a tlb miss before split_huge_page_map runs.
This will provide a more accurate page_referenced() behavior during
split_huge_page().
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel<riel@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hans de Goede [Sun, 13 Mar 2011 12:50:33 +0000 (13:50 +0100)]
hwmon/f71882fg: Set platform drvdata to NULL later
This avoids a possible race leading to trying to dereference NULL.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
This page took 0.048265 seconds and 5 git commands to generate.