Ken Raeburn [Thu, 7 Jan 1993 10:48:49 +0000 (10:48 +0000)]
Lots of changes from Eric Youngdale, mostly for VAX and VMS support.
Also, fix another goof in read.c, which caused ".data" not to work...
Mike Werner [Thu, 7 Jan 1993 04:39:57 +0000 (04:39 +0000)]
* Makefile.in: Removed explicit setting of SUBDIRS. This gets done
by configure, using configure.in .
**** start-sanitize-chill ****
* configure.in: Added sanitization for chill to the setting of
target_libs .
**** end-sanitize-chill ****
David D. Zuhn [Thu, 7 Jan 1993 01:43:53 +0000 (01:43 +0000)]
redo (yet again) chill sanitization -- thanks per
David D. Zuhn [Thu, 7 Jan 1993 01:24:52 +0000 (01:24 +0000)]
revert chill Sanitize patches
Per Bothner [Wed, 6 Jan 1993 23:19:45 +0000 (23:19 +0000)]
* arsup.h (interactive), bucomm.h (program_name): Prefix
with 'extern', to avoid warnings from some compilers.
Steve Chamberlain [Wed, 6 Jan 1993 23:16:17 +0000 (23:16 +0000)]
>
* arparse.y: fix unnecessary shift/reduce
Bill Cox [Wed, 6 Jan 1993 22:31:06 +0000 (22:31 +0000)]
fix chill sanitization
David D. Zuhn [Wed, 6 Jan 1993 21:45:48 +0000 (21:45 +0000)]
* test-build.mk: set $PATH for all builds
* Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
Fred Fish [Wed, 6 Jan 1993 19:04:18 +0000 (19:04 +0000)]
* Makefile.in (GCC_FOR_TARGET): Supply a default that matches
the one used in gcc/Makefile.in, so that a null expansion doesn't
override the one needed to build gcc with a native cc.
Steve Chamberlain [Wed, 6 Jan 1993 18:22:01 +0000 (18:22 +0000)]
* symfile.c: If O_BINARY isn't defined, set it to 0, call openp for
binary files oring in the right bit.
* main.c, source.c, state.c, symmisc.c: use macros defined in
fopen-{bin|both} when fopening files.
* remote-hms.c, remote-sim.c: lint
Fred Fish [Wed, 6 Jan 1993 16:52:10 +0000 (16:52 +0000)]
* defs.h (HOST_CHAR_BIT): New macro, defaults to either CHAR_BIT
from a configuration file (typically including <limits.h>), or to
TARGET_CHAR_BIT if CHAR_BIT is not defined.
* eval.c (evaluate_subexp): Use new BYTES_TO_EXP_ELEM macro.
* eval.c (evaluate_subexp): Add case for OP_BITSTRING.
* expprint.c (print_subexp): Use new BYTES_TO_EXP_ELEM macro.
* exppritn.c (print_subexp, dump_expression): Add case for
OP_BITSTRING.
* expression.h (OP_BITSTRING): New expression element type for
packed bitstrings.
* expression.h (EXP_ELEM_TO_BYTES, BYTES_TO_EXP_ELEM): New
macros to convert between number of expression elements and bytes
to store that many elements.
* i960-tdep.c (leafproc_return): Use new macros to access
minimal symbol name and address fields.
* m88k-pinsn.c (sprint_address): Use new macros to access
minimal symbol name and address fields.
* nindy-tdep.c (nindy_frame_chain_valid): Use new macro to access
minimal symbol address field.
* parse.c (write_exp_elt, write_exp_string, prefixify_expression,
parse_exp_1): Use new EXP_ELEM_TO_BYTES macro.
* parse.c (write_exp_string, length_of_subexp, prefixify_expression):
Use new BYTES_TO_EXP_ELEM macro.
* parse.c (write_exp_bitstring): New function to write packed
bitstrings into the expression element vector.
* parse.c (length_of_subexp, prefixify_subexp): Add case for
OP_BITSTRING.
* parser-defs.h (struct stoken): Document that it is used for
OP_BITSTRING as well as OP_STRING.
* parser-defs.h (write_exp_bitstring): Add prototype.
**** start-sanitize-chill ****
* ch-exp.y (BIT_STRING_LITERAL): Change token type to sval.
* ch-exp.y (NUM, PRED, SUCC, ABS, CARD, MAX, MIN, SIZE, UPPER,
LOWER, LENGTH): New tokens for keywords.
* ch-exp.y (chill_value_built_in_routine_call, mode_argument,
upper_lower_argument, length_argument, array_mode_name,
string_mode_name, variant_structure_mode_name): New non-terminals
and productions.
* ch-exp.y (literal): Useful production for BIT_STRING_LITERAL.
* ch-exp.y (match_bitstring_literal): New lexer support function
to recognize bitstring literals.
* ch-exp.y (tokentab6): New token table for 6 character keywords.
* ch-exp.y (tokentab5): Add LOWER, UPPER.
* ch-exp.y (tokentab4): Add PRED, SUCC, CARD, SIZE.
* ch-exp.y (tokentab3): Add NUM, ABS, MIN, MAX.
* ch-exp.y (yylex): Check tokentab6.
* ch-exp.y (yylex): Call match_bitstring_literal.
**** end-sanitize-chill ****
Fred Fish [Wed, 6 Jan 1993 16:02:53 +0000 (16:02 +0000)]
* Makefile.in (SUBDIRS): Add chillrt.
* Makefile.in (all.normal): Add all-chillrt.
* Makefile.in (all.cross): Add all-chillrt.
* Makefile.in (install-no-fixedincludes): Add install-chillrt.
* Makefile.in (install.cross): Add install-chillrt.
* Makefile.in (all-chillrt, install-chillrt): New targets.
* Makefile.in (subdir_do): Handle chillrt like newlib.
* configure.in (target_libs): Add chillrt.
(Also added appropriate stuff to .Sanitize)
David D. Zuhn [Wed, 6 Jan 1993 10:30:22 +0000 (10:30 +0000)]
handle machines other than DOS & Sun
David D. Zuhn [Wed, 6 Jan 1993 10:26:42 +0000 (10:26 +0000)]
use waitpid instead of wait4
David D. Zuhn [Wed, 6 Jan 1993 09:00:02 +0000 (09:00 +0000)]
fix install rule
David D. Zuhn [Wed, 6 Jan 1993 08:24:08 +0000 (08:24 +0000)]
use bfd_xmalloc instead of malloc
Steve Chamberlain [Tue, 5 Jan 1993 15:39:43 +0000 (15:39 +0000)]
* Makefile.in: FLAGS_TO_PASS, send down GCC_FOR_TARGET,
AR_FOR_TARGET and RANLIB_FOR_TARGET so gcc can make libgcc in a
Canadian Cross.
Ken Raeburn [Tue, 5 Jan 1993 14:57:44 +0000 (14:57 +0000)]
Temporary hack until Per's solution gets implemented: If --with-minimal-bfd is
specified, set MINIMIZE=1. (Not the default.)
Ken Raeburn [Tue, 5 Jan 1993 14:17:21 +0000 (14:17 +0000)]
expr.c (operand): handle logical end-of-line characters line newline
Ken Raeburn [Tue, 5 Jan 1993 13:44:58 +0000 (13:44 +0000)]
look for --with_bfd_assembler option
Ken Raeburn [Tue, 5 Jan 1993 13:00:59 +0000 (13:00 +0000)]
Accept -with arguments.
Requoting for recursion may be buggy, but it does handle simple cases now.
David D. Zuhn [Tue, 5 Jan 1993 10:49:49 +0000 (10:49 +0000)]
add groff
David D. Zuhn [Tue, 5 Jan 1993 10:49:11 +0000 (10:49 +0000)]
update dates
Fred Fish [Tue, 5 Jan 1993 04:20:54 +0000 (04:20 +0000)]
* xcoffexec.c (vmap_symtab): Use new macros to access minimal
symbol name and value fields.
Fred Fish [Tue, 5 Jan 1993 04:14:28 +0000 (04:14 +0000)]
* c-exp.y (yylex): Make static, to match prototype and other
<lang>-exp.y files.
Fred Fish [Tue, 5 Jan 1993 01:18:07 +0000 (01:18 +0000)]
* expression.h (exp_opcode): Add BINOP_MOD.
* eval.c (evaluate_subexp): Handle new BINOP_MOD.
* expprint.c (dump_expression): Handle new BINOP_MOD.
* language.c (binop_type_check): Handle new BINOP_MOD.
* main.c (float_handler): Re-enable float handler when hit.
* valarith.c (language.h): Include, need current_language.
* valarith.c (TRUNCATION_TOWARDS_ZERO): Define default macro
for integer divide truncates towards zero for negative results.
* valarith.c (value_x_binop): Handle BINOP_MOD if seen.
* valarith.c (value_binop): Allow arithmetic operations on
TYPE_CODE_CHAR variables. Add case to handle new BINOP_MOD.
**** start-sanitize-chill ****
* ch-exp.y (operand_4): Add useful actions for MOD and REM.
* ch-exp.y (tokentab3): Add MOD and REM.
* ch-exp.y (yylex): Set innermost_block for symbols found
in local scopes. Return LOCATION_NAME for local symbols.
* ch-lang.c (chill_op_print_tab): Fix MOD entry to use
BINOP_MOD instead of BINOP_REM. Add REM entry, using BINOP_REM.
**** end-sanitize-chill ****
Ken Raeburn [Mon, 4 Jan 1993 21:48:44 +0000 (21:48 +0000)]
fix goof from last change
Steve Chamberlain [Mon, 4 Jan 1993 20:55:22 +0000 (20:55 +0000)]
* p{1,3}.c (sim_resume): when running on dos, any character typed to
the keyboard will cause a simulated exception.
Steve Chamberlain [Mon, 4 Jan 1993 15:46:12 +0000 (15:46 +0000)]
Fix all-h8300sim typo
Steve Chamberlain [Mon, 4 Jan 1993 15:45:35 +0000 (15:45 +0000)]
Now works in a cross build environment
Steve Chamberlain [Mon, 4 Jan 1993 15:39:00 +0000 (15:39 +0000)]
* command.c (shell_escape, make_command, _initialze_command):
don't create or use fork if CANT_FORK is defined.
* serial.h, ser-go32.c: now compiles, but "the obvious problems of
code written for the IBM PC" remain.
* xm-go32.h: define CANT_FORK
Steve Chamberlain [Mon, 4 Jan 1993 15:21:21 +0000 (15:21 +0000)]
* srec.c (srec_write_records): one of my boards wants a CR between
records.
Ken Raeburn [Mon, 4 Jan 1993 13:28:51 +0000 (13:28 +0000)]
log for changes checked in this morning; deleted some duplicate entries
Ken Raeburn [Mon, 4 Jan 1993 13:24:39 +0000 (13:24 +0000)]
(s_data): Use "data_section"; it'll map to SEG_DATA or SEG_E1 if appropriate,
as soon as I check in as.h.
(s_lcomm): Likewise with bss_section.
(s_fill): Use memset, not bzero.
whitespace/comment changes.
deleted some "#ifdef DONTDEF" sections relating to GDB symtabs.
Ken Raeburn [Mon, 4 Jan 1993 13:14:53 +0000 (13:14 +0000)]
delete decls of segment_name, seg_name
Ken Raeburn [Mon, 4 Jan 1993 13:12:27 +0000 (13:12 +0000)]
comment reformatting
Steve Chamberlain [Mon, 4 Jan 1993 01:55:53 +0000 (01:55 +0000)]
Allow srcdir builds
Steve Chamberlain [Sun, 3 Jan 1993 23:16:04 +0000 (23:16 +0000)]
Added h8300sim
Steve Chamberlain [Sun, 3 Jan 1993 22:37:07 +0000 (22:37 +0000)]
* remote-sim.c: first attempt at general simulator interface
* remote-hms.c: whitespace
* h8300-tdep.c: (h8300_skip_prologue, examine_prologue):
understand new stack layout. (print_register_hook): print ccr
register in a fancy way.
include simulator target too.
Steve Chamberlain [Sun, 3 Jan 1993 22:36:04 +0000 (22:36 +0000)]
* remote-sim.c: first attempt at general simulator interface
* remote-hms.c: whitespace
* h8300-tdep.c: (h8300_skip_prologue, examine_prologue):
understand new stack layout. (print_register_hook): print ccr
register in a fancy way.
Fred Fish [Sun, 3 Jan 1993 22:24:21 +0000 (22:24 +0000)]
* eval.c (language.h): Include.
* eval.c (evaluate_subexp_with_coercion): Only coerce arrays
to pointer types when the current language is C. It loses for
other languages when the lower index bound is nonzero.
* valarith.c (value_subscript): Take array lower bounds into
account when performing subscripting operations.
* valops.c (value_coerce_array): Add comment describing why
arrays with nonzero lower bounds are dealt with in value_subscript,
rather than in value_coerce_array.
Steve Chamberlain [Sun, 3 Jan 1993 22:19:42 +0000 (22:19 +0000)]
* p1.c, p3.c, run.c, writecode.c: all used h8/300 opcodes in and
running
Fred Fish [Sun, 3 Jan 1993 06:56:08 +0000 (06:56 +0000)]
**** start-sanitize-chill ****
* ch-exp.y (FLOAT_LITERAL): Add token.
* ch-exp.y (literal): Add FLOAT_LITERAL.
* ch-exp.y (match_float_literal): New lexer routine.
* ch-exp.y (convert_float): Remove.
* ch-exp.y (yylex): Call match_float_literal.
* ch-exp.y (yylex): Match single '.' after trying
to match floating point literals.
**** end-sanitize-chill ****
Fred Fish [Sat, 2 Jan 1993 20:32:01 +0000 (20:32 +0000)]
* eval.c (evaluate_subexp): Add case MULTI_SUBSCRIPT.
* expprint.c (print_subexp): Rename BINOP_MULTI_SUBSCRIPT to
MULTI_SUBSCRIPT.
* expprint.c (dump_expression): New function for dumping
expression vectors during gdb debugging.
* expression.h (BINOP_MULTI_SUBSCRIPT): Name changed to
MULTI_SUBSCRIPT and moved out of BINOP range.
* expression.h (DUMP_EXPRESSION): New macro that calls
dump_expression if DEBUG_EXPRESSIONS is defined.
* m2-exp.y (BINOP_MULTI_SUBSCRIPT): Changed to MULTI_SUBSCRIPT.
* parse.c (length_of_subexp, prefixify_subexp): Change
BINOP_MULTI_SUBSCRIPT to MULTI_SUBSCRIPT.
* parse.c (parse_exp_1): Call DUMP_EXPRESSION before and after
prefixify'ing the expression.
* printcmd.c (print_command_1): Add comment.
**** start-sanitize-chill ****
* ch-exp.y (expression_list): Add useful actions.
* ch-exp.y (value_array_element): Add useful actions.
* ch-exp.y (array_primitive_value): Add production.
* ch-exp.y (yylex): Recognize ',' as a token.
**** end-sanitize-chill ****
David D. Zuhn [Sat, 2 Jan 1993 02:23:49 +0000 (02:23 +0000)]
pass prefix & exec_prefix, POSIXize recursive makes
Steve Chamberlain [Fri, 1 Jan 1993 22:21:33 +0000 (22:21 +0000)]
Replace T in TC_H8300
Fred Fish [Fri, 1 Jan 1993 20:29:41 +0000 (20:29 +0000)]
* tm-sun4sol2.h (CPLUS_MARKER): Remove, now set in tm-sysv4.h.
* tm-sysv4.h (CPLUS_MARKER): By default, g++ uses '.' as the
CPLUS_MARKER for all SVR4 systems, so follow suit.
* defs.h (strdup_demangled): Remove prototype.
* dwarfread.c (enum_type, synthesize_typedef): Use new macro
SYMBOL_INIT_LANGUAGE_SPECIFIC.
* dwarfread.c (new_symbol): Use SYMBOL_INIT_DEMANGLED_NAME.
* minsyms.c (install_minimal_symbols, prim_record_minimal_symbol,
prim_record_minimal_symbol_and_info): Use new macro
SYMBOL_INIT_LANGUAGE_SPECIFIC.
* minsyms.c (install_minimal_symbols): Use new macro
SYMBOL_INIT_DEMANGLED_NAME.
* stabsread.c (define_symbol): Use new macro
SYMBOL_INIT_DEMANGLED_NAME.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Use new macro SYMBOL_INIT_DEMANGLED_NAME.
* symfile.h (ADD_PSYMBOL_VT_TO_LIST): Use new macro
SYMBOL_INIT_DEMANGLED_NAME.
* symmisc.c (dump_msymbols, dump_symtab, print_partial_symbol):
SYMBOL_DEMANGLED_NAME now tests language itself.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): SYMBOL_DEMANGLED_NAME
now tests language itself.
* symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): New macro that does
what SYMBOL_DEMANGLED_NAME used to do, directly access the C++
mangled name member in the language dependent portion of a symbol.
* symtab.h (SYMBOL_DEMANGLED_NAME): New macro that returns the
mangled name member appropriate for a symbol's language.
* symtab.h (SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME,
SYMBOL_MATCHES_NAME, SYMBOL_MATCHES_REGEXP):
SYMBOL_DEMANGLED_NAME now tests language itself.
* symtab.h (SYMBOL_INIT_LANGUAGE_SPECIFIC): New macro that
initializes language dependent portion of symbol.
* symtab.h (SYMBOL_INIT_DEMANGLED_NAME): New macro that
demangles and caches the demangled form of symbol names.
* utils.c (fputs_demangled, fprint_symbol): Use current language
to select an appropriate demangling algorithm.
* utils.c (strdup_demangled): Remove, no longer used.
**** start-sanitize-chill ****
* symtab.h (SYMBOL_CHILL_DEMANGLED_NAME): New macro that directly
access the Chill mangled name member in the language dependent
portion of a symbol.
* ch-lang.c (chill_demangle): New function, simple demangler.
* defs.h (chill_demangle): Add prototype.
* symtab.h (language_dependent_info): Add struct for Chill.
**** end-sanitize-chill ****
Fred Fish [Thu, 31 Dec 1992 19:08:08 +0000 (19:08 +0000)]
* Makefile.in (BISON): Add comment that when bison is used, it
must include the "-y" option.
* c-exp.y, m2-exp.y (yyrule, yyname, yyss, yyssp, yyvs, yyvsp):
Remove defines to remap non-yacc symbols, thus backing out of
previous recent changes. Standard policy is that non-yacc parser
generators get fixed, rather than adding bug workarounds in gdb
for each new one that pops up. Expand comment to note this.
* c-exp.y, m2-exp.y (YYDEBUG): Revert back to disabled by default.
Stu Grossman [Thu, 31 Dec 1992 17:24:06 +0000 (17:24 +0000)]
* partial-stab.h (near N_BINCL): Remove redundant code in N_BINCL
case. Use code in N_SOL.
Stu Grossman [Thu, 31 Dec 1992 17:14:14 +0000 (17:14 +0000)]
* paread.c: New file that contains all HPPA/HPUX symbol reading
code.
* dbxread.c: Remove almost all HPPA/HPUX symbol reading code.
* (dbx_symfile_init): Use sizeof(long) instead of 4.
* (dbx_symfile_offsets): Make static.
* (pastab_build_psymtabs): New interface routine for paread to
send stabs into dbxread.
* gdb-stabs.h: Remove gobs of HPPA cruft.
Fred Fish [Thu, 31 Dec 1992 06:23:28 +0000 (06:23 +0000)]
* c-exp.y, m2-exp.y (yyrule, yyname): Remap like other yy* names
for byacc.
**** start-sanitize-chill ****
* ch-exp.y (yyrule, yyname): Remap like other yy* names for byacc.
**** end-sanitize-chill ****
Fred Fish [Thu, 31 Dec 1992 04:05:05 +0000 (04:05 +0000)]
* c-exp.y, m2-exp.y (yyreds, yytoks): Remap like other yy* names.
* c-exp.y, m2-exp.y (YYDEBUG): Define if MAINTENANCE_CMDS is defined
and YYDEBUG is not already defined.
* c-exp.y (strncmp): Replace throughout with STREQN, missed
them during the previous replacements.
* printcmd.c (_initialize_printcmd): Update internal documentation
for "set" command to note that the assignment syntax is language
dependent.
**** start-sanitize-chill ****
* ch-exp.y (yyreds, yytoks): Remap like other yy* names.
* ch-exp.y (YYDEBUG): Define if MAINTENANCE_CMDS is defined
and YYDEBUG is not already defined.
* ch-exp.y (GDB_REGNAME, GDB_LAST, GDB_VARIABLE, GDB_ASSIGNMENT,
single_assignment_action): New terminals and nonterminal for gdb
extensions to chill expression grammer.
* ch-exp.y (match_dollar_tokens): Lexer routine to match all
tokens that start with '$' (register names, convenience vars, etc).
* ch-exp.y (tokentab2): Add GDB_ASSIGNMENT.
* ch-exp.y (yylex): Call match_dollar_tokens.
**** end-sanitize-chill ****
David D. Zuhn [Thu, 31 Dec 1992 01:30:27 +0000 (01:30 +0000)]
update comments
Ian Lance Taylor [Wed, 30 Dec 1992 21:39:51 +0000 (21:39 +0000)]
A bunch of changes to COFF support. See the ChangeLog.
Ian Lance Taylor [Wed, 30 Dec 1992 20:49:21 +0000 (20:49 +0000)]
Wed Dec 30 12:46:30 1992 Ian Lance Taylor (ian@cygnus.com)
* archive.c (do_slurp_coff_armap): set symdef_count correctly
(it broke a couple of weeks ago).
Ian Lance Taylor [Wed, 30 Dec 1992 20:34:14 +0000 (20:34 +0000)]
Wed Dec 30 10:18:57 1992 Ian Lance Taylor (ian@cygnus.com)
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
David D. Zuhn [Wed, 30 Dec 1992 06:52:33 +0000 (06:52 +0000)]
updated dates
Ken Raeburn [Wed, 30 Dec 1992 02:48:29 +0000 (02:48 +0000)]
fix libbfd.h declaration, by tweaking elf.c comment, so bfd can compile
Ken Raeburn [Wed, 30 Dec 1992 00:16:39 +0000 (00:16 +0000)]
regenerated from current sources - bfd_elf_find_section return type changed
Ken Raeburn [Tue, 29 Dec 1992 23:53:52 +0000 (23:53 +0000)]
app.c (app_push): Use memcpy, not bcopy.
(do_scrub_next_char): For \", return " not '.
(symbol_chars): Now const.
Ian Lance Taylor [Tue, 29 Dec 1992 23:39:18 +0000 (23:39 +0000)]
Tue Dec 29 15:06:00 1992 Ian Lance Taylor (ian@cygnus.com)
* config/mh-sco: Don't override BISON definition.
Ian Lance Taylor [Tue, 29 Dec 1992 23:10:26 +0000 (23:10 +0000)]
Tue Dec 29 15:06:00 1992 Ian Lance Taylor (ian@cygnus.com)
* build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
(all-cygnus, native, build-cygnus): Make
$(canonhost)-stamp-3stage-done, not $(host)....
* test-build.mk (stamp-3stage-compared): Use tail +10c for
i386-sco3.2v4. Added else true to if command.
Ian Lance Taylor [Tue, 29 Dec 1992 21:59:15 +0000 (21:59 +0000)]
Tue Dec 29 13:54:35 1992 Ian Lance Taylor (ian@cygnus.com)
* coffcode.h (coff_real_object_p): use name I386AIXMAGIC rather
than I386SVMAGIC.
(coff_pointerize_aux): don't pointerize a negative tagndx
(sometimes generated by SCO 3.2v4 cc).
* bout.c (calljx_callback, callj_callback,
b_out_get_relocated_section_contents): warn if relocating against
an undefined symbol.
Stu Grossman [Tue, 29 Dec 1992 00:27:18 +0000 (00:27 +0000)]
* hppah-tdep.c (skip_trampoline_code): Use new macros for
accessing minimal symbol data.
* infcmd.c (read_pc): Use #ifdef, not #if.
* symfile.c (syms_from_objfile): Add CONST to decl for targets.
* tm-hppa.h (FIX_CALL_DUMMY): Use new macros for accessing
minimal symbol data.
Stu Grossman [Mon, 28 Dec 1992 23:19:51 +0000 (23:19 +0000)]
* hppah-tdep.c (frame_saved_pc): Use better test for outermost
frame. Use find_return_regnum to find the caller.
* (find_unwind_entry): New routine to locate stack frame info
associated with a procedure. This looks in the $UNWIND_START$
section in the SOM file.
* (find_return_regnum): New routine. Uses find_unwind_entry() to
figure out where the caller's return address is stored.
* (find_proc_framesize): New routine. Uses find_unwind_entry()
to figure out the frame size for a procedure.
* (saved_pc_after_call): New routine, moved from tm-hppa.h.
* (init_extra_frame_info): New routine. Corrects PC and FP for
outermost frame if necessary.
* (frame_chain): New routine, moved from tm-hppa.h.
* (skip_trampoline_code): Handle computed function calls (ie:
calls from $$dyncall).
* (unwind_command): Temporary support function to allow user
to control/observe aspects of the unwind (stack frame) info.
* infcmd.c (read_pc): (Temporary), put a hack in to see if the PC
was in a system call, if so, then read the PC from r31.
* tm-hppah.h (SKIP_TRAMPOLINE_CODE, IN_SOLIB_TRAMPOLINE): Deal
with extra arg for skip_trampoline_code().
* (INIT_EXTRA_FRAME_INFO): Define to point at subr (see above).
* (FRAME_CHAIN, FRAME_CHAIN_VALID): Turn into real subroutines.
* tm-hppa.h (SAVED_PC_AFTER_CALL): Turn into real subroutine.
Stu Grossman [Mon, 28 Dec 1992 22:57:19 +0000 (22:57 +0000)]
* hppa.c: Get rid of DEFUN, use more conventional prolog stuff.
Make a bunch more routines be static.
* hppa.c (fill_spaces): Get rid of this, replace with much better
written setup_sections().
* (setup_sections): New routine to create BFD sections for each
space and subspace in SOM files.
* (hppa_object_setup): Use BFD sections created by
setup_sections() to locate GDB symbol table info.
* (make_unique_section): New routine to create a BFD section. It
ensures that the given name is unique, and will generate a unique
one if necessary.
* (hppa_object_p): Become much more paranoid about file header.
* (make_bfd_asection): Call bfd_make_section to do the dirty
work. Simplify code somewhat.
* (hppa_core_file_p): Use proper name for stack section.
* libhppa.h: Remove millicode_start, millicode_end decls.
Ken Raeburn [Mon, 28 Dec 1992 22:17:40 +0000 (22:17 +0000)]
rebuilt from current bfd library
Ken Raeburn [Mon, 28 Dec 1992 20:10:40 +0000 (20:10 +0000)]
from fsf: sequent os is bsd(ish)
Ian Lance Taylor [Mon, 28 Dec 1992 19:43:59 +0000 (19:43 +0000)]
Mon Dec 28 11:15:35 1992 Ian Lance Taylor (ian@cygnus.com)
* m68kcoff.sc-sh: define _end as well as end, for consistency with
aout.sc-sh.
* configure.in: accept *-ericsson-ose for any m68k CPU.
* ldwrite.c (write_rel): don't always set SEC_HAS_CONTENTS flag
for each output section.
Ken Raeburn [Mon, 28 Dec 1992 19:11:56 +0000 (19:11 +0000)]
today's changes
Ken Raeburn [Mon, 28 Dec 1992 19:04:43 +0000 (19:04 +0000)]
note dependencies for coff-z8k.o and -we32k.o
Ken Raeburn [Mon, 28 Dec 1992 18:40:10 +0000 (18:40 +0000)]
expr.c (0$), obj-coff.h (#elif), ho-sunos.h (sys/stdtypes) changes
Ken Raeburn [Mon, 28 Dec 1992 18:38:32 +0000 (18:38 +0000)]
avoid #elif
Ken Raeburn [Mon, 28 Dec 1992 18:38:10 +0000 (18:38 +0000)]
SunOS 4.0.3 has no sys/stdtypes.h
Ken Raeburn [Mon, 28 Dec 1992 18:37:21 +0000 (18:37 +0000)]
handle local label number zero -- 0f, 0b, 0$ -- correctly
Ian Lance Taylor [Mon, 28 Dec 1992 16:34:12 +0000 (16:34 +0000)]
Mon Dec 28 08:32:06 1992 Minh Tran-Le (mtranle@paris.intellicorp.com)
* configure.in (i[34]86-*-isc*): added; uses mh-sysv.
Fred Fish [Mon, 28 Dec 1992 01:54:41 +0000 (01:54 +0000)]
* bfd.h: Add declaration for bfd_get_size().
Fred Fish [Mon, 28 Dec 1992 01:51:57 +0000 (01:51 +0000)]
* bfd.c (bfd_get_size): New function that gets an upper bound
on the possible size of any object in a bfd.
* elf.c (bfd_elf_find_section, elf_get_str_section,
elf_get_symtab_upper_bound): Rewrite to avoid NULL pointer
dereferences.
* elf.c (elf_big_vec, elf_little_vec): Document last three
members initialized to NULL.
Fred Fish [Mon, 28 Dec 1992 01:44:21 +0000 (01:44 +0000)]
* dbxread.c (dbx_symfile_init, elfstab_build_psymtabs):
Call new bfd_get_size() and verify that string table is no larger
than the file that is supposed to contain it.
* symfile.c (syms_from_objfile): Only complain about configured
NAMES_HAVE_UNDERSCORE differences between gdb and bfd if the
current target is the default BFD target.
Fred Fish [Sun, 27 Dec 1992 04:59:09 +0000 (04:59 +0000)]
* solib.c (BKPT_AT_MAIN): Change to BKPT_AT_SYMBOL.
* solib.c (bkpt_names): New array of symbol names to try to
use for the "mapping complete" breakpoint. Configurable
define SOLIB_BKPT_NAME is first one to try.
* solib.c (find_solib): Test debug_base for nonzero rather
than just greater than zero.
* solib.c (enable_break): Use bkpt_names to look up address
at which to set "mapping complete" breakpoint.
David D. Zuhn [Fri, 25 Dec 1992 01:50:27 +0000 (01:50 +0000)]
* hppa.c: change a 'const' to 'CONST', or else HP C compiler dies
David D. Zuhn [Fri, 25 Dec 1992 01:31:54 +0000 (01:31 +0000)]
better clean handling
David D. Zuhn [Fri, 25 Dec 1992 01:27:18 +0000 (01:27 +0000)]
don't remove binutils from Solaris builds
David D. Zuhn [Fri, 25 Dec 1992 01:26:01 +0000 (01:26 +0000)]
updated dates
David D. Zuhn [Thu, 24 Dec 1992 22:44:50 +0000 (22:44 +0000)]
added dvi target
David D. Zuhn [Thu, 24 Dec 1992 22:10:05 +0000 (22:10 +0000)]
clean up mostlyclean changes
Per Bothner [Thu, 24 Dec 1992 20:42:13 +0000 (20:42 +0000)]
* Makefile.in (mostlyclean, distclean, realclean): Fix to
do more-or-less the right thing.
Fred Fish [Wed, 23 Dec 1992 06:44:25 +0000 (06:44 +0000)]
* demangle.h: Protect file from multiple inclusions with
#if !defined(DEMANGLE_H)...#define DEMANGLE_H...#endif.
Fred Fish [Wed, 23 Dec 1992 06:34:57 +0000 (06:34 +0000)]
* defs.h (STRCMP, STREQ, STREQN): New macros.
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
Per Bothner [Tue, 22 Dec 1992 23:52:26 +0000 (23:52 +0000)]
* Makefile.in: Make check depend on all.
* Makefile.in (distclean): Remove sysdep.h.
* size.c: Use %u format where appropriate.
* objdump.c: Standardize: L_SET -> SEEK_SET.
* objdump.c: Use new macro bfd_asymbol_bfd.
* configure.in: Allow std-host as the default ${mys_host}.
Per Bothner [Tue, 22 Dec 1992 23:46:19 +0000 (23:46 +0000)]
* ldexp.c, ldlang.c, ldmain.c, ldsym.c, ldwarn.c: Use new
macro bfd_asymbol_bfd as appropriate.
* Makefile.in: Un-duplicate ldlex.c dependency.
* condigure.in: Replace my_host case table by sourcing
../bfd/configure.host. Allow std-host as the default.
* ldmisc.c: Change logic for C++ name demangling: There is
no initial '_' to remove from stab-derived function names.
Per Bothner [Tue, 22 Dec 1992 23:41:30 +0000 (23:41 +0000)]
New version, generated automatically.
Per Bothner [Tue, 22 Dec 1992 23:40:27 +0000 (23:40 +0000)]
* bfd-in.h: New macros bfd_asymbol_bfd and bfd_asymbol_flavour;
perhaps we can later remove the the_bfd field from each symbol.
* syms.c (struct symbol_cache_entry): Remove unused field
app_data. Add comment noting that the_bfd is almost redundant,
but not quite.
* aoutx.h, coff-a29k.c, coff-i386.c, coff-i960.c, coffcode.h:
Use new macros bfd_asymbol_bfd and bfd_asymbol_flavour.
* hppa.c (fill_spaces): Make slightly more rebust.
* configure.in: Allow std-host as the "default" host.
Per Bothner [Tue, 22 Dec 1992 23:37:36 +0000 (23:37 +0000)]
* hosts/std-host.h: New file. Attempt at a generic/default
set of definitions, to discourage porting to new hosts by copying.
* hosts/news.h: Removed.
* hosts/sparc.h: Use std-host.h.
David D. Zuhn [Tue, 22 Dec 1992 23:28:53 +0000 (23:28 +0000)]
updated dates, added -g to hppa native CFLAGS
David D. Zuhn [Tue, 22 Dec 1992 23:27:58 +0000 (23:27 +0000)]
add dvi target
David D. Zuhn [Tue, 22 Dec 1992 23:26:39 +0000 (23:26 +0000)]
don't build sed -- it's broken
David D. Zuhn [Tue, 22 Dec 1992 23:08:06 +0000 (23:08 +0000)]
update date, remove stage1 make if on rs6000
Steve Chamberlain [Tue, 22 Dec 1992 21:59:06 +0000 (21:59 +0000)]
H8/300 simulator
Fred Fish [Tue, 22 Dec 1992 06:32:19 +0000 (06:32 +0000)]
* valprint.c (val_print): Reorganize comment and add note
about dependency on target byte ordering.
**** start-sanitize-chill ****
* ch-exp.y (value_array_slice): Fix typo.
* ch-valprint.c (chill_val_print): Remove C'ism that arrays of
byte sized ints are assumed to be char strings and printed with
string syntax. In chill, arrays of chars and arrays of
bytes/ubytes are distinquishable, and printed appropriately.
**** end-sanitize-chill ****
This page took 0.042092 seconds and 4 git commands to generate.