Hans Verkuil [Mon, 13 Jun 2011 20:44:42 +0000 (17:44 -0300)]
[media] v4l2-events/fh: merge v4l2_events into v4l2_fh
Drivers that supported events used to be rare, but now that controls can also
raise events this will become much more common since almost all drivers have
controls.
This means that keeping struct v4l2_events as a separate struct make no more
sense. Merging it into struct v4l2_fh simplifies things substantially as it
is now an integral part of the filehandle struct.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrew Chew [Thu, 23 Jun 2011 23:19:44 +0000 (20:19 -0300)]
[media] V4L: ov9740: Add suspend/resume
On suspend, remember whether we are streaming or not, and at what frame format,
so that on resume, we can start streaming again.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrew Chew [Thu, 23 Jun 2011 23:19:43 +0000 (20:19 -0300)]
[media] V4L: ov9740: Reorder video and core ops
This is to avoid needing a forward declaration when ov9740_s_power() (in the
subsequent patch) calls ov9740_s_fmt().
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrew Chew [Thu, 23 Jun 2011 23:19:42 +0000 (20:19 -0300)]
[media] V4L: ov9740: Remove hardcoded resolution regs
Derive resolution-dependent register settings programmatically.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrew Chew [Thu, 23 Jun 2011 23:19:41 +0000 (20:19 -0300)]
[media] V4L: ov9740: Fixed some settings
Based on vendor feedback, should issue a software reset at start of day.
Also, OV9740_ANALOG_CTRL15 needs to be changed so the sensor does not begin
streaming until it is ready (otherwise, results in a nonsense frame for the
initial frame).
Added a comment on using discontinuous clock.
Finally, OV9740_ISP_CTRL19 needs to be changed to really use YUYV ordering
(the previous value was for VYUY).
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrew Chew [Thu, 23 Jun 2011 23:19:40 +0000 (20:19 -0300)]
[media] V4L: ov9740: Correct print in ov9740_reg_rmw()
The register width of the ov9740 is 16-bits, so correct the debug print
to reflect this.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrew Chew [Thu, 23 Jun 2011 23:19:39 +0000 (20:19 -0300)]
[media] V4L: ov9740: Cleanup hex casing inconsistencies
Made all hex number casing use lower-case throughout the entire driver
for consistency.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Josh Wu [Wed, 8 Jun 2011 01:40:19 +0000 (22:40 -0300)]
[media] V4L: at91: add Atmel Image Sensor Interface (ISI) support
This patch is to enable Atmel Image Sensor Interface (ISI) driver support.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Tue, 7 Jun 2011 09:24:32 +0000 (06:24 -0300)]
[media] V4L: soc-camera: remove several now unused soc-camera client operations
This patch removes .enum_input(), .suspend() and .resume() soc-camera
client operations.
Functionality, provided by .enum_input(), if needed, can be implemented
using the v4l2-subdev API.
As for .suspend() and .resume(), the only client driver, implementing
these methods has been mt9m111, and the only host driver, using them
has been pxa-camera. Now that both those drivers have been converted
to the standard subdev .s_power() operation, .suspend() and .resume()
can be removed.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Sun, 5 Jun 2011 11:27:39 +0000 (08:27 -0300)]
[media] V4L: mt9m111: switch to v4l2-subdev .s_power() method
Eliminate soc-camera specific .suspend() and .restore() methods in favour
of the standard v4l2-subdev .s_power() method
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Tue, 7 Jun 2011 09:47:30 +0000 (06:47 -0300)]
[media] V4L: mt9m111: propagate higher level abstraction down in functions
It is more convenient to propagate the higher level abstraction - the
struct mt9m111 object into functions and then retrieve a pointer to
the i2c client, if needed, than to do the reverse.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Sat, 4 Jun 2011 20:24:22 +0000 (17:24 -0300)]
[media] V4L: soc-camera: MIPI flags are not sensor flags
SOCAM_MIPI_[1234]LANE flags are not board-specific sensor flags, they
are bus configuration flags.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Sat, 4 Jun 2011 19:48:10 +0000 (16:48 -0300)]
[media] V4L: tw9910: remove bogus ENUMINPUT implementation
tw9910 is a TV decoder, it doesn't have a tuner. Besides, the
.enum_input soc-camera operation is optional and normally not needed.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Sat, 4 Jun 2011 18:09:02 +0000 (15:09 -0300)]
[media] V4L: sh_mobile_ceu_camera: remove redundant calculations
soc_camera core now performs the standard .bytesperline and .sizeimage
calculations internally, no need to duplicate in drivers.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Sat, 4 Jun 2011 18:06:47 +0000 (15:06 -0300)]
[media] V4L: mx2_camera: .try_fmt shouldn't fail
If the user is requesting too large a frame, instead of failing
select an acceptable geometry, preserving the requested aspect ratio.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Tue, 7 Jun 2011 08:50:15 +0000 (05:50 -0300)]
[media] V4L: pxa-camera: switch to using subdev .s_power() core operation
soc-camera specific .suspend() and .resume() methods are deprecated
and should be replaced by the subdev standard .s_power() operation.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Tue, 7 Jun 2011 08:44:19 +0000 (05:44 -0300)]
[media] V4L: pxa-camera: try to force progressive video format
The pxa-camera driver only supports progressive video so far. Passing
down to the client the same format, as what the user has requested can
result in interlaced video, even if the client supports both. This
patch avoids such cases.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Tue, 7 Jun 2011 08:42:57 +0000 (05:42 -0300)]
[media] V4L: pxa_camera: remove redundant calculations
soc_camera core now performs the standard .bytesperline and .sizeimage
calculations internally, no need to duplicate in drivers.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Sat, 4 Jun 2011 17:11:10 +0000 (14:11 -0300)]
[media] V4L: mx3_camera: remove redundant calculations
soc_camera core now performs the standard .bytesperline and .sizeimage
calculations internally, no need to duplicate in drivers.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 28 Jun 2011 13:43:13 +0000 (10:43 -0300)]
[media] v4l2-ctrls: make manual_mode_value 8 bits and check against control range
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 7 Jun 2011 14:43:57 +0000 (11:43 -0300)]
[media] v4l2-compat-ioctl32: add VIDIOC_DQEVENT support
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 28 Jun 2011 13:40:42 +0000 (10:40 -0300)]
[media] ivtv: add control event support
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 7 Jun 2011 13:20:23 +0000 (10:20 -0300)]
[media] vivi: support control events
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 7 Jun 2011 12:53:37 +0000 (09:53 -0300)]
[media] V4L2 spec: document control events
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 10 Jun 2011 08:56:39 +0000 (05:56 -0300)]
[media] v4l2-ctrls: simplify event subscription
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 7 Jun 2011 14:13:44 +0000 (11:13 -0300)]
[media] v4l2-ctrls: add control events
Whenever a control changes value or state an event is sent to anyone
that subscribed to it.
This functionality is useful for control panels but also for applications
that need to wait for (usually status) controls to change value.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 7 Jun 2011 09:47:18 +0000 (06:47 -0300)]
[media] v4l2-ctrls: add v4l2_fh pointer to the set control functions
When an application changes a control you want to generate an event.
However, you want to avoid sending such an event back to the application
(file handle) that caused the change.
Add the filehandle to the various set control functions.
The filehandle isn't used yet, but the control event patches will need
this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 7 Jun 2011 09:34:41 +0000 (06:34 -0300)]
[media] vivi: add autogain/gain support to test the autocluster functionality
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 7 Jun 2011 08:46:53 +0000 (05:46 -0300)]
[media] Documentation: Improve cluster documentation and document the new autoclusters
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 10 Jun 2011 08:44:36 +0000 (05:44 -0300)]
[media] v4l2-ctrls: add v4l2_ctrl_auto_cluster to simplify autogain/gain scenarios
It is a bit tricky to handle autogain/gain type scenerios correctly. Such
controls need to be clustered and the V4L2_CTRL_FLAG_UPDATE should be set on
the autofoo controls. In addition, the manual controls should be marked
inactive when the automatic mode is on, and active when the manual mode is on.
This also requires specialized volatile handling.
The chances of drivers doing all these things correctly are pretty remote.
So a new v4l2_ctrl_auto_cluster function was added that takes care of these
issues.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 27 May 2011 11:53:37 +0000 (08:53 -0300)]
[media] v4l2-controls.txt: update to latest v4l2-ctrl.c changes
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 10 Jun 2011 08:43:34 +0000 (05:43 -0300)]
[media] v4l2-ctrls: fix and improve volatile control handling
If you have a cluster of controls that is a mix of volatile and non-volatile
controls, then requesting the value of the volatile control would fail if the
master control of that cluster was non-volatile. The code assumed that the
volatile state of the master control was the same for all other controls in
the cluster.
This is now fixed.
In addition, it was clear from bugs in some drivers that it was confusing that
the ctrl->cur union had to be used in g_volatile_ctrl. Several drivers used the
'new' values instead. The framework was changed so that drivers now set the new
value instead of the current value.
This has an additional benefit as well: the volatile values are now only stored
in the 'new' value, leaving the current value alone. This is useful for
autofoo/foo control clusters where you want to have a 'foo' control act like a
volatile control if 'autofoo' is on, but as a normal control when it is off.
Since with this change the cur value is no longer overwritten when g_volatile_ctrl
is called, you can use it to remember the original 'foo' value. For example:
autofoo = 0, foo = 10 and foo is non-volatile.
Now autofoo is set to 1 and foo is marked volatile. Retrieving the foo value
will get the volatile value. Set autofoo back to 0, which marks foo as non-
volatile again, and retrieving foo will get the old current value of 10.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 25 May 2011 11:52:13 +0000 (08:52 -0300)]
[media] v4l2-subdev: implement per-filehandle control handlers
To be consistent with v4l2-ioctl.c.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 12 Mar 2011 11:54:43 +0000 (08:54 -0300)]
[media] v4l2-ioctl: add ctrl_handler to v4l2_fh
This is required to implement control events and is also needed to allow
for per-filehandle control handlers.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 7 Jun 2011 07:50:31 +0000 (04:50 -0300)]
[media] v4l2-ctrls: drivers should be able to ignore the READ_ONLY flag
When applications try to set READ_ONLY controls an error should
be returned. However, when drivers do that it should be accepted.
Those controls could reflect some driver status which the application
can't change but the driver obviously has to be able to change it.
This is needed among others for future HDMI status controls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 7 Jun 2011 07:40:04 +0000 (04:40 -0300)]
[media] v4l2-ctrls: simplify error_idx handling
The lower-level prepare functions just set error_idx for each control that
might have an error. The high-level functions will override this with
cs->count in the get and set cases. Only try will keep the error_idx.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 25 May 2011 09:04:58 +0000 (06:04 -0300)]
[media] v4l2-ctrls: introduce call_op define
Add the call_op define to safely call the control ops. This also allows
for controls without any ops such as the 'control class' controls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 17:11:52 +0000 (14:11 -0300)]
[media] DocBook/v4l: Document the new system-wide version behavior
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 13:15:42 +0000 (10:15 -0300)]
[media] radio: Use the subsystem version control for VIDIOC_QUERYCAP
Just like the video drivers, the right thing to do is to use
the per-subsystem version control.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 14:28:37 +0000 (11:28 -0300)]
[media] Stop using linux/version.h on the remaining video drivers
Standardize the remaining video drivers to return the API version
for the VIDIOC_QUERYCAP version, instead of a per-driver version.
Those drivers had the version updated more recently or are SoC
drivers. Even so, it doesn't sound a good idea to keep a per-driver
version control, so, let's use the per-subsystem version control
instead.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 28 Jun 2011 01:28:38 +0000 (22:28 -0300)]
[media] gspca: don't include linux/version.h
Instead of handling a per-driver driver version, use the
per-subsystem one.
As reviewed by Jean-Francois Moine <moinejf@free.fr>:
- the 'info' may be simplified:
Reviewed-by: Jean-Francois Moine <moinejf@free.fr>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 16:50:37 +0000 (13:50 -0300)]
[media] uvcvideo: Use LINUX_VERSION_CODE for VIDIOC_QUERYCAP
uvcvideo doesn't use vidioc_ioctl2. As the API is changing to use
a common version for all drivers, we need to expliticly fix this
driver.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 16:43:22 +0000 (13:43 -0300)]
[media] sn9c102: Use LINUX_VERSION_CODE for VIDIOC_QUERYCAP
sn9c102 doesn't use vidioc_ioctl2. As the API is changing to use
a common version for all drivers, we need to expliticly fix this
driver.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 16:34:24 +0000 (13:34 -0300)]
[media] pvrusb2: Use LINUX_VERSION_CODE for VIDIOC_QUERYCAP
pvrusb2 doesn't use vidioc_ioctl2. As the API is changing to use
a common version for all drivers, we need to expliticly fix this
driver.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 15:57:04 +0000 (12:57 -0300)]
[media] et61x251: Use LINUX_VERSION_CODE for VIDIOC_QUERYCAP
et61x251 doesn't use vidioc_ioctl2. As the API is changing to use
a common version for all drivers, we need to expliticly fix this
driver.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 14:23:01 +0000 (11:23 -0300)]
[media] ivtv,cx18: Use default version control for VIDIOC_QUERYCAP
After discussing with Andy Walls on irc, we've agreed that this
is the best thing to do. No regressions will be introduced, as 3.x.y
is greater then the current versions for cx18 and ivtv.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 13:07:39 +0000 (10:07 -0300)]
[media] pwc: Use the default version for VIDIOC_QUERYCAP
After discussing with Hans, change pwc to use the default version
control.
The only version ever used for pwc driver is 10.0.12, due to
commit
2b455db6d456ef2d44808a8377fd3bc832e08317.
Changing it to 3.x.y won't conflict with the old version.
There's no namespace conflicts in any predictable future.
Even on the remote far-away case where we might have a conflict,
it will be on just one specific stable Kernel release (Kernel 10.0.12),
if we ever have such stable release.
So, it is safe and consistent on using 3.x.y numering schema for
it.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 24 Jun 2011 17:45:49 +0000 (14:45 -0300)]
[media] Stop using linux/version.h on most video drivers
All the modified drivers didn't have any version increment since
Jan, 1 2011. Several of them didn't have any version increment
for a long time, even having new features and important bug fixes
happening.
As we're now filling the QUERYCAP version with the current Kernel
Release, we don't need to maintain a per-driver version control
anymore. So, let's just use the default.
In order to preserve the Kernel module version history, a
KERNEL_VERSION() macro were added to all modified drivers, and
the extraver number were incremented.
I opted to preserve the per-driver version control to a few
pwc, pvrusb2, s2255, s5p-fimc and sh_vou.
A few drivers are still using the legacy way to handle ioctl's.
So, we can't do such change on them, otherwise, they'll break.
Those are: uvc, et61x251 and sn9c102.
The rationale is that the per-driver version control seems to be
actively maintained on those.
Yet, I think that the better for them would be to just use the
default version numbering, instead of doing that by themselves.
While here, removed a few uneeded include linux/version.h
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 13:39:36 +0000 (10:39 -0300)]
[media] drxd, siano: Remove unused include linux/version.h
Both drxd and siano drivers were including linux/version.h without
any reason. Probably, this is due to some compatibility code that
used to exist before having their support added into the Linux
Kernel.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 24 Jun 2011 16:14:14 +0000 (13:14 -0300)]
[media] v4l2-ioctl: Add a default value for kernel version
Most drivers don't increase kernel versions as newer features are added or
bug fixes are solved. So, vidioc_querycap returned value for cap->version is
meaningless. Instead of keeping this situation forever, let's add a default
value matching the current Linux version.
Drivers that want to keep their own version control can still do it, as they
can override the default value for cap->version.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Jun 2011 17:28:08 +0000 (14:28 -0300)]
[media] DocBook/v4l: Remove references to the old V4L1 compat layer
The old V4L1 Kernel copatibility layer was removed, but the API
spec still says that it is there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Mon, 20 Jun 2011 19:14:40 +0000 (16:14 -0300)]
[media] marvell-cam: implement contiguous DMA operation
The core driver can now operate in either vmalloc or dma-contig modes;
obviously the latter is preferable when it is supported. Default is
currently vmalloc on all platforms; load the module with buffer_mode=1 for
contiguous DMA mode.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Mon, 20 Jun 2011 19:14:39 +0000 (16:14 -0300)]
[media] marvell-cam: Don't spam the logs on frame loss
The sequence numbers already give that information if user space cares;
this is a frequent occurrence on slower machines, alas.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Mon, 20 Jun 2011 19:14:38 +0000 (16:14 -0300)]
[media] marvell-cam: no need to initialize the DMA buffers
This was an old debugging thing from years ago. It's only done at
initialization time, but it's still unnecessary; take it out.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Mon, 20 Jun 2011 19:14:37 +0000 (16:14 -0300)]
[media] marvell-cam: include file cleanup
Put the includes into a slightly more readable ordering and get rid of a
few unneeded ones.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Mon, 20 Jun 2011 19:14:36 +0000 (16:14 -0300)]
[media] marvell-cam: convert to videobuf2
This is a basic, naive conversion to the videobuf2 infrastructure, removing
a lot of code in the process. For now, we're using vmalloc, which is
suboptimal, but it does match what the cafe driver did before. In the cafe
case, it may have to stay that way just because memory is too tight to do
direct streaming; mmp-camera will be able to do better.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Sat, 18 Jun 2011 08:52:21 +0000 (05:52 -0300)]
[media] v4l: Fix minor typos in the documentation
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manjunath Hadli [Fri, 17 Jun 2011 07:01:36 +0000 (04:01 -0300)]
[media] davinci vpbe: Readme text for Dm6446 vpbe
Please refer to this file for detailed documentation of
davinci vpbe v4l2 driver.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manjunath Hadli [Fri, 17 Jun 2011 07:01:35 +0000 (04:01 -0300)]
[media] davinci vpbe: Build infrastructure for VPBE driver
This patch adds the build infra-structure for Davinci
VPBE dislay driver.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manjunath Hadli [Fri, 17 Jun 2011 07:01:34 +0000 (04:01 -0300)]
[media] davinci vpbe: VENC( Video Encoder) implementation
This patch adds the VENC or the Video encoder, which is responsible
for the blending of all source planes and timing generation for Video
modes like NTSC, PAL and other digital outputs. the VENC implementation
currently supports COMPOSITE and COMPONENT outputs and NTSC and PAL
resolutions through the analog DACs. The venc block is implemented
as a subdevice, allowing for additional external and internal encoders
of other kind to plug-in.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manjunath Hadli [Fri, 17 Jun 2011 07:01:33 +0000 (04:01 -0300)]
[media] davinci vpbe: OSD(On Screen Display) block
This patch implements the functionality of the OSD block
of the VPBE. The OSD in total supports 4 planes or Video
sources - 2 mainly RGB and 2 Video. The patch implements general
handling of all the planes, with specific emphasis on the Video
plane capabilities as the Video planes are supported through the
V4L2 driver.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manjunath Hadli [Fri, 17 Jun 2011 07:01:32 +0000 (04:01 -0300)]
[media] davinci vpbe: VPBE display driver
This patch implements the core functionality of the display driver,
mainly controlling the VENC and other encoders, and acting as
the one point interface for the main V4L2 driver. This implements
the core of each of the V4L2 IOCTLs.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manjunath Hadli [Fri, 17 Jun 2011 07:01:31 +0000 (04:01 -0300)]
[media] davinci vpbe: V4L2 display driver for DM644X SoC
This is the display driver for Texas Instruments's DM644X family
SoC. This patch contains the main implementation of the driver with the
V4L2 interface. The driver implements the streaming model with
support for both kernel allocated buffers and user pointers. It also
implements all of the necessary IOCTLs necessary and supported by the
video display device.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jiri Slaby [Thu, 16 Jun 2011 19:06:56 +0000 (16:06 -0300)]
[media] DVB: dvb-net, make the kconfig text helpful
Telling the user they can disable an option if they want is not the
much useful. Describe what it is good for instead.
The text was derived from Mauro's email.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Hans Petter Selasky <hselasky@c2i.net>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Greg Dietsche [Thu, 16 Jun 2011 16:33:35 +0000 (13:33 -0300)]
[media] dvb: remove unnecessary code
remove unnecessary code that matches this coccinelle pattern
if (...)
return ret;
return ret;
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tejun Heo [Wed, 15 Jun 2011 13:32:06 +0000 (10:32 -0300)]
[media] dvb-usb/technisat-usb2: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.
technisat-usb2 already sync-cancels the only work item it uses and
there's no reason for it to call flush_scheduled_work(). Don't use
it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Bjørn Mork [Tue, 14 Jun 2011 12:59:14 +0000 (09:59 -0300)]
[media] DVB API: Mention the dvbM device
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Bjørn Mork [Tue, 14 Jun 2011 12:42:47 +0000 (09:42 -0300)]
[media] V4L1 API has been moved into "legacy" on the linuxtv.org site
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ondrej Zary [Sat, 11 Jun 2011 13:37:29 +0000 (10:37 -0300)]
[media] tea575x: remove useless input ioctls
Remove empty and useless g_input and s_input ioctls.
This fixes one fail of v4l2-compliance test.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ondrej Zary [Sat, 11 Jun 2011 13:28:59 +0000 (10:28 -0300)]
[media] tea575x: allow multiple opens
Change locking to allow tea575x-radio device to be opened multiple times.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Richard Röjfors [Fri, 10 Jun 2011 14:48:48 +0000 (11:48 -0300)]
[media] radio-timb: Simplified platform data
This patch simplifies the platform data slightly, by removing
unused elements.
Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Fri, 10 Jun 2011 10:43:26 +0000 (07:43 -0300)]
[media] media: DVB_NET must depend on DVB_CORE
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Thu, 9 Jun 2011 00:24:25 +0000 (21:24 -0300)]
[media] cx23885: Add IR Rx support for HVR-1270 boards
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Peter Moon [Wed, 8 Jun 2011 18:54:19 +0000 (15:54 -0300)]
[media] cx231xx: Add support for Hauppauge WinTV USB2-FM
This patch adds support for the "Hauppauge WinTV USB2-FM" Analog TV Stick.
It includes support for both the PAL and NTSC variants of the device.
Signed-off-by: Peter Moon <pomoon@gmail.com>
Reviewed-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Justin P. Mattock [Mon, 6 Jun 2011 16:11:52 +0000 (13:11 -0300)]
[media] frontends/s5h1420: Change: clock_settting to clock_setting
Changes clock_settting to clock_setting.
Note: This could be intentionally set this way from the beginning and/or
is a typo.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
istvan_v@mailbox.hu [Tue, 7 Jun 2011 16:21:02 +0000 (13:21 -0300)]
[media] cx88: replaced duplicated code with function call
The following patch replaces code to reset the XC3028 tuner with a call
to the tuner reset callback.
Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
istvan_v@mailbox.hu [Tue, 7 Jun 2011 16:16:56 +0000 (13:16 -0300)]
[media] cx88: added support for Leadtek WinFast DTV1800 H with XC4000 tuner
This patch implements support for the Leadtek WinFast DTV1800 H card with
XC4000 tuner (107d:6f38).
Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
istvan_v@mailbox.hu [Tue, 7 Jun 2011 16:14:53 +0000 (13:14 -0300)]
[media] cx88: added support for Leadtek WinFast DTV2000 H Plus
This patch implements support for the Leadtek WinFast DTV2000 H Plus card
with XC4000 tuner (107d:6f42).
Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
istvan_v@mailbox.hu [Tue, 7 Jun 2011 16:12:29 +0000 (13:12 -0300)]
[media] cx88: added XC4000 tuner callback and DVB attach functions
Added functions for XC4000 tuner reset and attaching DVB frontend.
Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 18 Jun 2011 02:18:21 +0000 (23:18 -0300)]
[media] em28xx: Mark Kworld 305 as validated
This board were used for testing the em28xx-alsa using a separate interface.
So, it is obviously validated ;)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 17 Jun 2011 18:15:12 +0000 (15:15 -0300)]
[media] em28xx: Add support for devices with a separate audio interface
Some devices use a separate interface for the vendor audio class.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 19 Jun 2011 16:39:31 +0000 (13:39 -0300)]
[media] em28xx-audio: Some Alsa API fixes
Mark the alsa stream with SNDRV_PCM_INFO_BATCH,
as the timing to get audio streams can vary.
Also, add SNDRV_PCM_TRIGGER for pause/release.
while here, fix the stop indicator, to be sure that audio
will be properly released at the stop events.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 19 Jun 2011 13:15:35 +0000 (10:15 -0300)]
[media] em28xx-audio: Properly report failures to start stream
If the audio stream fails for any reason, it should:
1) Report an error via dmesg;
2) Mark internally that the stream didn't started.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 18 Jun 2011 14:00:20 +0000 (11:00 -0300)]
[media] em28xx-audio: add debug info for the volume control
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 19 Jun 2011 16:14:07 +0000 (13:14 -0300)]
[media] em28xx-audio: volumes are inverted
While here, fix volume mask to 5 bits
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 19 Jun 2011 16:08:46 +0000 (13:08 -0300)]
[media] em28xx-audio: add support for mute controls
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 19 Jun 2011 16:06:40 +0000 (13:06 -0300)]
[media] em28xx-alsa: add mixer support for AC97 volume controls
Export ac97 volume controls via mixer.
Pulseaudio will probably handle it very badly, as it has
no idea about how volumes are wired, and how are they
associated with each TV input. Those wirings are
card model dependent, and we don't have the wiring mappings
for each supported device.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 18 Jun 2011 13:19:11 +0000 (10:19 -0300)]
[media] em28xx: Allow to compile it without RC/input support
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 18 Jun 2011 10:02:49 +0000 (07:02 -0300)]
[media] em28xx: Fix a wrong enum at the ac97 control tables
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 17 Jun 2011 23:28:51 +0000 (20:28 -0300)]
[media] em28xx: Don't initialize a var if won't be using it
Fixes most cases of initializing a var but not using it.
There are still 3 cases at em28xx-alsa, were those vars should
probably be used.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Sat, 11 Jun 2011 17:46:49 +0000 (14:46 -0300)]
[media] marvell-cam: Basic working MMP camera driver
Now we have a camera working over the marvell cam controller core. It
works like the cafe driver and has all the same limitations, contiguous DMA
only being one of them. But it's a start.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Sat, 11 Jun 2011 17:46:48 +0000 (14:46 -0300)]
[media] marvell-cam: Allocate the i2c adapter in the platform driver
The upcoming mmp-camera driver will need an i2c_adapter structure allocated
externally, so change the core adapter to a pointer and require the
platform code to fill it in.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Sat, 11 Jun 2011 17:46:47 +0000 (14:46 -0300)]
[media] marvell-cam: Right-shift i2c slave ID's in the cafe driver
This makes the cafe i2c implement consistent with the rest of Linux so that
the core can use the same slave ID everywhere.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Sat, 11 Jun 2011 17:46:46 +0000 (14:46 -0300)]
[media] marvell-cam: Move Cafe-specific register definitions to cafe-driver.c
Nobody else ever needs to see these, so let's hide them.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Sat, 11 Jun 2011 17:46:45 +0000 (14:46 -0300)]
[media] marvell-cam: Remove the "untested" comment
This code is, indeed, tested :)
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Sat, 11 Jun 2011 17:46:44 +0000 (14:46 -0300)]
[media] marvell-cam: Pass sensor parameters from the platform
Depending on the controller, the ov7670 sensor may be told to work with a
different clock speed or to use the SMBUS protocol. Remove the wired-in
code and pass that information from the platform layer. The Cafe driver
now just assumes it's running on an OLPC XO 1; I do not believe it has ever
run anywhere else.
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Sat, 11 Jun 2011 17:46:43 +0000 (14:46 -0300)]
[media] marvell-cam: Separate out the Marvell camera core
There will eventually be multiple users of the core camera controller, so
separate it from the bus/platform/i2c stuff. I've tried to do the minimal
set of changes to get the driver functioning in this configuration; I did
clean up a bunch of old checkpatch gripes in the process. This driver
works like the old one did on OLPC XO 1 systems.
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Sat, 11 Jun 2011 17:46:42 +0000 (17:46 +0000)]
[media] marvell-cam: Move cafe-ccic into its own directory
This driver will soon become a family of drivers, so let's give it its own
place to live. This move requires putting ov7670.h into include/media, but
there are no code changes.
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 16 Jun 2011 02:13:19 +0000 (23:13 -0300)]
[media] DocBook: Use base64 for gif/png files
The patch utility doesn't work with non-binary files. This causes some
tools to break, like generating tarball targets and the scripts that
generate diff patches at http://www.kernel.org/pub/linux/kernel/v2.6/.
So, let's convert all binaries to ascii using base64, and add a
logic at Makefile to convert them back into binaries at runtime.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andre Bartke [Fri, 3 Jun 2011 18:06:58 +0000 (15:06 -0300)]
[media] drivers/media/video: fix memory leak of snd_cx18_init()
cxsc is not freed in the error case.
Signed-off-by: Andre Bartke <andre.bartke@gmail.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This page took 0.044197 seconds and 5 git commands to generate.