Eric W. Biederman [Mon, 21 Sep 2015 18:01:58 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_service_net_cleanup
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:57 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_flush
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:56 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_add_service
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:55 +0000 (13:01 -0500)]
ipvs: Cache ipvs in ip_vs_genl_set_cmd
Compute ipvs early in ip_vs_genl_set_cmd and use the cached value to
access ipvs->sync_state.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:54 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_dest_trash_expire
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:53 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to __ip_vs_del_dest
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:52 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_trash_cleanup
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:51 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_find_dest
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:50 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_has_real_service
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:49 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_service_find
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:48 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to __ip_vs_service_find
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:47 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_svc_hashkey
Use the address of ipvs not the address of net when computing the
hash value. This removes an unncessary dependency on struct net.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:46 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to __ip_vs_svc_fwm_find
ipvs is what the code actually wants to use.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:45 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_svc_fwm_hashkey
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:44 +0000 (13:01 -0500)]
ipvs: Store ipvs not net in struct ip_vs_service
In practice struct netns_ipvs is as meaningful as struct net and more
useful as it holds the ipvs specific data. So store a pointer to
struct netns_ipvs.
Update the accesses of param->net to access param->ipvs->net instead.
In functions where we are searching for an svc and filtering by net
filter by ipvs instead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:43 +0000 (13:01 -0500)]
ipvs: Pass ipvs not net to ip_vs_fill_conn
ipvs is what is actually desired so change the parameter and the modify
the callers to pass struct netns_ipvs.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:42 +0000 (13:01 -0500)]
ipvs: Store ipvs not net in struct ip_vs_conn_param
In practice struct netns_ipvs is as meaningful as struct net and more
useful as it holds the ipvs specific data. So store a pointer to
struct netns_ipvs.
Update the accesses of param->net to access param->ipvs->net instead.
When lookup up struct ip_vs_conn in a hash table replace comparisons
of cp->net with comparisons of cp->ipvs which is possible
now that ipvs is present in ip_vs_conn_param.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:41 +0000 (13:01 -0500)]
ipvs: Store ipvs not net in struct ip_vs_conn
In practice struct netns_ipvs is as meaningful as struct net and more
useful as it holds the ipvs specific data. So store a pointer to
struct netns_ipvs.
Update the accesses of conn->net to access conn->ipvs->net instead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:40 +0000 (13:01 -0500)]
ipvs: Use state->net in the ipvs forward functions
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:39 +0000 (13:01 -0500)]
ipvs: Don't use current in proc_do_defense_mode
Instead store ipvs in extra2 so that proc_do_defense_mode can easily
find the ipvs that it's value is associated with.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Eric W. Biederman [Mon, 21 Sep 2015 18:01:38 +0000 (13:01 -0500)]
ipvs: Hoist computation of ipvs earlier in sctp_conn_schedule
The addition of sysctl_sloppy_sctp in sctp_conn_schedule resulted
in a use of ipvs before it was computed. Hoist the computation of
ipvs earlier to avoid this problem.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Andrzej Hajda [Mon, 21 Sep 2015 13:33:59 +0000 (15:33 +0200)]
usbnet: remove invalid check
skb->len is always non-negative.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrzej Hajda [Mon, 21 Sep 2015 13:33:55 +0000 (15:33 +0200)]
rndis_wlan: fix checking for default value
Thresholds uses -1 to indicate that default value should be used.
Since thresholds are unsigned sign checking makes no sense.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrzej Hajda [Mon, 21 Sep 2015 13:33:54 +0000 (15:33 +0200)]
orinoco: fix checking for default value
Thresholds uses -1 to indicate that default value should be used.
Since thresholds are unsigned sign checking makes no sense.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrzej Hajda [Mon, 21 Sep 2015 13:33:53 +0000 (15:33 +0200)]
mwifiex: fix comparison expression
To avoid underflows signed variables should be used in expression.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrzej Hajda [Mon, 21 Sep 2015 13:33:52 +0000 (15:33 +0200)]
net: brcm80211: fix range check
Unsigned minus constant is still unsigned so checking its sign makes no
sense.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrzej Hajda [Mon, 21 Sep 2015 13:33:51 +0000 (15:33 +0200)]
net: stmmac: fix type of entry variable
Variable can store negative values.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrzej Hajda [Mon, 21 Sep 2015 13:33:50 +0000 (15:33 +0200)]
net/ibm/emac: fix type of phy_mode
phy_mode can be negative.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrzej Hajda [Mon, 21 Sep 2015 13:33:49 +0000 (15:33 +0200)]
isdn: hisax: fix frame calculation
Difference of unsigned values is also unsigned so it does not make
sense to check its sign.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Sep 2015 20:11:43 +0000 (13:11 -0700)]
Merge git://git./linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next tree
in this 4.4 development cycle, they are:
1) Schedule ICMP traffic to IPVS instances, this introduces a new schedule_icmp
proc knob to enable/disable it. By default is off to retain the old
behaviour. Patchset from Alex Gartrell.
I'm also including what Alex originally said for the record:
"The configuration of ipvs at Facebook is relatively straightforward. All
ipvs instances bgp advertise a set of VIPs and the network prefers the
nearest one or uses ECMP in the event of a tie. For the uninitiated, ECMP
deterministically and statelessly load balances by hashing the packet
(usually a 5-tuple of protocol, saddr, daddr, sport, and dport) and using
that number as an index (basic hash table type logic).
The problem is that ICMP packets (which contain really important
information like whether or not an MTU has been exceeded) will get a
different hash value and may end up at a different ipvs instance. With no
information about where to route these packets, they are dropped, creating
ICMP black holes and breaking Path MTU discovery. Suddenly, my mom's
pictures can't load and I'm fielding midday calls that I want nothing to do
with.
To address this, this patch set introduces the ability to schedule icmp
packets which is gated by a sysctl net.ipv4.vs.schedule_icmp. If set to 0,
the old behavior is maintained -- otherwise ICMP packets are scheduled."
2) Add another proc entry to ignore tunneled packets to avoid routing loops
from IPVS, also from Alex.
3) Fifteen patches from Eric Biederman to:
* Stop passing nf_hook_ops as parameter to the hook and use the state hook
object instead all around the netfilter code, so only the private data
pointer is passed to the registered hook function.
* Now that we've got state->net, propagate the netns pointer to netfilter hook
clients to avoid its computation over and over again. A good example of how
this has been simplified is the former TEE target (now nf_dup infrastructure)
since it has killed the ugly pick_net() function.
There's another round of netns updates from Eric Biederman making the line. To
avoid the patchbomb again to almost all the networking mailing list (that is 84
patches) I'd suggest we send you a pull request with no patches or let me know
if you prefer a better way.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Rothwell [Tue, 22 Sep 2015 03:41:44 +0000 (20:41 -0700)]
drivers/net/ieee802154/at86rf230.c: seq_printf() now returns NULL
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@osg.samsung.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Sep 2015 00:21:47 +0000 (17:21 -0700)]
Merge branch 'cpsw-macid-no-of'
Mugunthan V N says:
====================
Add support for reading macid when DT macid not found
Did a boot test on dra7-evm [1] and am437x-gp-evm [2].
Pushed a branch [3] for others to test the patch.
[1]: http://pastebin.ubuntu.com/
12513420/
[2]: http://pastebin.ubuntu.com/
12513428/
[3]: git://git.ti.com/~mugunthanvnm/ti-linux-kernel/linux.git cpsw-macid-read-support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Mon, 21 Sep 2015 10:26:53 +0000 (15:56 +0530)]
arm: dts: am4372: add syscon phandle to cpsw node
There are 2 MACIDs stored in the control module of the am4372.
These are read by the cpsw driver if no valid MACID was found
in the devicetree.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Mon, 21 Sep 2015 10:26:52 +0000 (15:56 +0530)]
arm: dts: dra7: add syscon phandle to cpsw node
There are 2 MACIDs stored in the control module of the dra7.
These are read by the cpsw driver if no valid MACID was found
in the devicetree.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Mon, 21 Sep 2015 10:26:51 +0000 (15:56 +0530)]
drivers: net: cpsw-common: add support for reading mac address for dra7 and am437x platforms
Adding support for reading mac address using syscon driver for
dra7 and am437x platforms
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Mon, 21 Sep 2015 10:26:50 +0000 (15:56 +0530)]
drivers: net: cpsw: davinci_emac: move reading mac id to common file
Moving mac address reading from ethernet driver to common
file for better maintenance and for code reusable.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Sep 2015 00:15:03 +0000 (17:15 -0700)]
Merge tag 'linux-can-next-for-4.4-
20150921' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2015-09-17
this is a pull request of 8 patches for net-next/master.
All 8 patches are by me and cleanup the flexcan driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 18 Sep 2015 21:16:53 +0000 (14:16 -0700)]
net: bcmgenet: Remove duplicate test for tx_coalesce_usecs_high
We were checking twice for ec->tx_coalesce_usecs_high, remove the
duplicate test.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reported-by: kbuild-all@01.org
Fixes: 2f9130709d2c19 ("net: bcmgenet: Implement TX coalescing control knobs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Fri, 18 Sep 2015 18:40:33 +0000 (11:40 -0700)]
tcp: send loss probe after 1s if no RTT available
This patch makes TLP to use 1 sec timer by default when RTT is
not available due to SYN/ACK retransmission or SYN cookies.
Prior to this change, the lack of RTT prevents TLP so the first
data packets sent can only be recovered by fast recovery or RTO.
If the fast recovery fails to trigger the RTO is 3 second when
SYN/ACK is retransmitted. With this patch we can trigger fast
recovery in 1sec instead.
Note that we need to check Fast Open more properly. A Fast Open
connection could be (accepted then) closed before it receives
the final ACK of 3WHS so the state is FIN_WAIT_1. Without the
new check, TLP will retransmit FIN instead of SYN/ACK.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Fri, 18 Sep 2015 18:36:14 +0000 (11:36 -0700)]
tcp: usec resolution SYN/ACK RTT
Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK
RTT is often measured as 0ms or sometimes 1ms, which would affect
RTT estimation and min RTT samping used by some congestion control.
This patch improves SYN/ACK RTT to be usec resolution if platform
supports it. While the timestamping of SYN/ACK is done in request
sock, the RTT measurement is carefully arranged to avoid storing
another u64 timestamp in tcp_sock.
For regular handshake w/o SYNACK retransmission, the RTT is sampled
right after the child socket is created and right before the request
sock is released (tcp_check_req() in tcp_minisocks.c)
For Fast Open the child socket is already created when SYN/ACK was
sent, the RTT is sampled in tcp_rcv_state_process() after processing
the final ACK an right before the request socket is released.
If the SYN/ACK was retransmistted or SYN-cookie was used, we rely
on TCP timestamps to measure the RTT. The sample is taken at the
same place in tcp_rcv_state_process() after the timestamp values
are validated in tcp_validate_incoming(). Note that we do not store
TS echo value in request_sock for SYN-cookies, because the value
is already stored in tp->rx_opt used by tcp_ack_update_rtt().
One side benefit is that the RTT measurement now happens before
initializing congestion control (of the passive side). Therefore
the congestion control can use the SYN/ACK RTT.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Sep 2015 23:03:05 +0000 (16:03 -0700)]
Merge branch 's390-next'
Ursula Braun says:
====================
s390: qeth and iucv patches
here is version 2 of some s390 related qeth patches for net-next. The patch by
Thomas Richter adds a new feature to the qeth layer2 code; the remaining
patches are minor improvements.
Version 2 of patch 4 uses the desired indentation in function declarations
and definitions spanning multiple lines in almost all cases. Thomas run into a
conflict with the maximum number of columns once. Thus you will still see one
function definition using an earlier column before the opening paranthesis.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 18 Sep 2015 14:06:52 +0000 (16:06 +0200)]
s390/iucv: do not use arrays as argument
The iucv code uses arrays as arguments. Even though this does not
really cause a problem, it could be misleading, since the compiler
turns array arguments into just a pointer argument. To be more
precise this patch changes the array arguments into pointers.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Richter [Fri, 18 Sep 2015 14:06:51 +0000 (16:06 +0200)]
qeth: add layer 2 RX/TX checksum offloading
Checksum offloading for send and receive is already
supported for layer 3 (IP layer). This patch
adds support for RX and TX hardware checksum offloading
for layer 2 (MAC layer). The hardware calculates the checksum
for IP UDP and TCP packets.
This patch moves the hardware checksum offloading setup
to the set of common functions in qeth_core_main.c.
Layer 2 and layer 3 now simply call the same common functions.
Also note that TX checksum offloading is always enabled.
The device driver relies on the TCP/IP stack to make use of
this feature.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 18 Sep 2015 14:06:50 +0000 (16:06 +0200)]
qeth: move OSA portname into deprecated status
An OSA-Express port name was required to identify a shared OSA port.
All operating system instances that shared the port had to use the
same port name. This requirement no longer applies.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lakhvich Dmitriy [Fri, 18 Sep 2015 14:06:49 +0000 (16:06 +0200)]
qeth: no write permission for readonly sysattr
User is not allowed to write into bridge_state sysfs file.
Fixed attribute not mislead the user
Signed-off-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Reviewed-by: Thomas Richter <tmricht@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Crosser [Fri, 18 Sep 2015 14:06:48 +0000 (16:06 +0200)]
qeth: remove extraneous length from %pM format
Length specifier in the %pM format is not supported (at least, not
documented). Remove it, and also an extraneous '&' for the array.
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Sep 2015 23:00:44 +0000 (16:00 -0700)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2015-09-18
Here's the first bluetooth-next pull request for the 4.4 kernel:
- ieee802154 cleanups & fixes
- debugfs support for the at86rf230 driver
- Support for quirky (seemingly counterfeit) CSR Bluetooth controllers
- Power management and device config improvements for Intel controllers
- Fix for devices with incorrect advertising data length
- Fix for closing HCI user channel socket
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde [Thu, 27 Aug 2015 12:24:48 +0000 (14:24 +0200)]
can: flexcan: enable interrupts atomically at the end of flexcan_chip_start()
This patch defers the writing of the interrupts bits of the CTRL register order
to enables all interrupts atomically at the the of the flexcan_chip_start()
function.
Suggested-by: Torsten Lang <torsten.lang@uweschneider.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Tue, 25 Aug 2015 08:39:19 +0000 (10:39 +0200)]
can: flexcan: give member of flexcan_priv holding mailboxes a sensible name
This patch gives the member of flexcan_priv holding mailboxes a sensible name,
by renaming from "cantxfg" to "mb":
struct flexcan_priv::cantxfg -> struct flexcan_priv::mb
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 8 May 2015 07:32:58 +0000 (09:32 +0200)]
can: flexcan: use pointer to struct regs instead of void pointer for mmio address space
This patch renames the pointer to the mmio address space from "base" to "regs"
and changes the type from "void __iomem *" to "struct flexcan_regs __iomem *".
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 8 May 2015 13:22:36 +0000 (15:22 +0200)]
can: flexcan: rename feature into quirks
This patch renames the "features" member of struct flexcan_devtype_data to
"quirks". The corresponding defines are renamed too, to reflect what they
actually do.
FLEXCAN_HAS_V10_FEATURES -> FLEXCAN_QUIRK_DISABLE_RXFG
FLEXCAN_HAS_BROKEN_ERR_STATE -> FLEXCAN_QUIRK_BROKEN_ERR_STATE
FLEXCAN_HAS_MECR_FEATURES -> FLEXCAN_QUIRK_DISABLE_MECR
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Mon, 31 Aug 2015 19:32:34 +0000 (21:32 +0200)]
can: flexcan: flexcan_chip_start(): cleanup writing of reg_mcr
This patch changes the order the individual bits of the mcr register in
flexcan_chip_start() are or'ed together to match the datasheet. The inline
documentation is adjusted accordingly.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Sat, 9 May 2015 16:25:05 +0000 (18:25 +0200)]
can: flexcan: remove unused header files
This patch removes unused header files from the flexcan driver.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Sat, 9 May 2015 15:47:52 +0000 (17:47 +0200)]
can: headers: make header files self contained
This patch adds the missing #include-s to the dev.h and led.h, so that they can
be used without including further header files.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Thu, 6 Aug 2015 12:53:57 +0000 (14:53 +0200)]
can: flexcan: cleanup coding style and fix typos
This patch fixes up the coding style to make checkpatch happier. Some typos are
also fixed.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
David S. Miller [Mon, 21 Sep 2015 05:26:58 +0000 (22:26 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-09-17
This series contains updates to i40e and i40evf.
Shannon provides updates to i40e and i40evf to resolve an issue with the
nvmupdate utility. First renames a variable name to reduce confusion and
to differentiate it from the actual user variable. Then added the ability
to save the admin queue write back descriptor if a caller supplies a
buffer for it to be saved into. Added a new GetStatus command so that
the NVM update tool can query the current status instead of doing fake
write requests to probe for readiness. Added wait states to the NVM
update state machine to signify when waiting for an update operation to
finish, whether we are in the middle of a set of write operations, or we
are now idle but waiting. Then added a facility to run admin queue
commands through the NVM update utility in order to allow the update
tools to interact with the firmware and do special commands needed for
updates and configuration changes. Also added a facility to recover the
result of a previously run admin queue command.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Sep 2015 04:58:23 +0000 (21:58 -0700)]
Merge tag 'linux-can-next-for-4.4-
20150917' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2015-09-17
this is a pull request of two patches for net-next/master.
Gerhard Bertelsmann adds support for the CAN controller found on the
Allwinner A10/A20 SoC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ksenija Stanojevic [Thu, 17 Sep 2015 16:12:53 +0000 (18:12 +0200)]
rxrpc: Replace get_seconds with ktime_get_seconds
Replace time_t type and get_seconds function which are not y2038 safe
on 32-bit systems. Function ktime_get_seconds use monotonic instead of
real time and therefore will not cause overflow.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Sep 2015 04:42:58 +0000 (21:42 -0700)]
Merge branch 'hsilicon-net-subsys'
huangdaode says:
====================
net: Hisilicon Network Subsystem support
This is V2 of Hisilicon Network Subsystem(HNS) patchesets taking care
about LKML comments.
Please find out the changes from the change logs.
This patchset is rebased on mainline kernel Linux 4.3-rc1 branch.
[PATCH v2 1/5] Device Tree Binding Documentation
[PATCH v2 2/5] Merge MDIO Module
[PATCH v2 3/5] Hisilicon Network Acceleration Engine Framework
[PATCH v2 4/5] Distributed System Area Fabric Module
[PATCH v2 5/5] Basic Ethernet Driver Module
Changes from V1:
1. Remove "inline" in C file (according to LKML comment, same in below).
2. Fix a bug about class_find_device.
3. Change the DTS pattern on hnae, restruct it to compatible with Hi1610 soc.
4. Unified hip04_mdio and hip05_mdio into hns_mdio, which is more usaul for
later SOCs.
V1 Patches Reference: https://lkml.org/lkml/2015/8/14/165
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
huangdaode [Thu, 17 Sep 2015 06:51:50 +0000 (14:51 +0800)]
net: add Hisilicon Network Subsystem basic ethernet support
This is to add basic ethernet support for HNS. It is one of the way to
use the HNS acceleration engine. But most of the decoding/encoding
capability of the AE cannot be used in this way.
This submit contains the basic feature as a ethernet driver. More will
be added later.
Signed-off-by: huangdaode <huangdaode@hisilicon.com>
Signed-off-by: Kenneth Lee <liguozhu@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
huangdaode [Thu, 17 Sep 2015 06:51:49 +0000 (14:51 +0800)]
net: add Hisilicon Network Subsystem DSAF support
DSAF, namely Distributed System Area Fabric, is one of the HNS
acceleration engine implementation. This patch add DSAF driver to the
system.
hns_ae_adapt: the adaptor for registering the driver to HNAE framework
hns_dsaf_mac: MAC cover interface for GE and XGE
hns_dsaf_gmac: GE (10/100/1000G Ethernet) MAC function
hns_dsaf_xgmac: XGE (10000+G Ethernet) MAC function
hns_dsaf_main: the platform device driver for the whole hardware
hns_dsaf_misc: some misc helper function, such as LED support
hns_dsaf_ppe: packet process engine function
hns_dsaf_rcb: ring buffer function
Signed-off-by: huangdaode <huangdaode@hisilicon.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: Kenneth Lee <liguozhu@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
huangdaode [Thu, 17 Sep 2015 06:51:48 +0000 (14:51 +0800)]
net: add Hisilicon Network Subsystem hnae framework support
HNAE (Hisilicon Network Acceleration Engine) is a framework to provide a
unified ring buffer interface for Hisilicon Network Acceleration
Engines.
With the interface, upper layer can work as ethernet driver, ODP driver
or other service driver on purpose.
Signed-off-by: huangdaode <huangdaode@hisilicon.com>
Signed-off-by: Kenneth Lee <liguozhu@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
huangdaode [Thu, 17 Sep 2015 06:51:47 +0000 (14:51 +0800)]
net: add Hisilicon Network Subsystem MDIO support
The MDIO support for Hisilicon Network Subsystem. It is used in Hislicon
hip04, hip05 and Hi1610 SoC to control the external PHY
Signed-off-by: huangdaode <huangdaode@hisilicon.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: Kenneth Lee <liguozhu@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
huangdaode [Thu, 17 Sep 2015 06:51:46 +0000 (14:51 +0800)]
net: add Hisilicon Network Subsystem support (config and documents)
The Hisilicon Network Subsystem is a long term evolution IP which is
supposed to be used in Hisilicon ICT SoC. The IP, which is called hns
for short, is a TCP/IP acceleration engine, which can directly decode
TCP/IP stream and distribute them to different ring buffers.
HNS can be configured to work on different mode for different scenario.
This patch make use only some of the mode to make it as standard
ethernet NIC. The other mode will be added soon.
The whole function has 4 kernel sub-modules:
hnae: the HNS acceleration engine framework. It provides a abstract
interface between the engine and the upper layers which make use of the
engine by ring buffer.
hns_enet_drv: a standard ethernet driver that base on the ring buffer.
hns_dsaf: one of the implementation of HNS acceleration engine, which is
applied on Hililicon hip05, Hi1610 and other later-on SoCs
hns_mdio: the mdio control to the PHY, used by acceleration engine
This submit add basic config and documents
Signed-off-by: huangdaode <huangdaode@hisilicon.com>
Signed-off-by: Kenneth Lee <liguozhu@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
chas williams [Wed, 16 Sep 2015 20:28:25 +0000 (16:28 -0400)]
xen-netfront: always set num queues if possible
If netfront connects with two (or more) queues and then reconnects with
only one queue it fails to delete or rewrite the multi-queue-num-queues
key and netback will try to use the wrong number of queues.
Always write the num-queues field if the backend has multi-queue support.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric W. Biederman [Fri, 18 Sep 2015 19:33:08 +0000 (14:33 -0500)]
netfilter: Use nf_ct_net instead of dev_net(out) in nf_nat_masquerade_ipv6
Use nf_ct_net(ct) instead of guessing that the netdevice out can
reliably report the network namespace the conntrack operation is
happening in.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:33:07 +0000 (14:33 -0500)]
netfilter: Pass net into nf_xfrm_me_harder
Instead of calling dev_net on a likley looking network device
pass state->net into nf_xfrm_me_harder.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:33:06 +0000 (14:33 -0500)]
netfilter: Pass priv instead of nf_hook_ops to netfilter hooks
Only pass the void *priv parameter out of the nf_hook_ops. That is
all any of the functions are interested now, and by limiting what is
passed it becomes simpler to change implementation details.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:33:05 +0000 (14:33 -0500)]
ipvs: Read hooknum from state rather than ops->hooknum
This should be more cache efficient as state is more likely to be in
core, and the netfilter core will stop passing in ops soon.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:33:04 +0000 (14:33 -0500)]
netfilter: nf_conntrack: Add a struct net parameter to l4_pkt_to_tuple
As gre does not have the srckey in the packet gre_pkt_to_tuple
needs to perform a lookup in it's per network namespace tables.
Pass in the proper network namespace to all pkt_to_tuple
implementations to ensure gre (and any similar protocols) can get this
right.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:33:03 +0000 (14:33 -0500)]
act_connmark: Remember the struct net instead of guessing it.
Stop guessing the struct net instead of remember it. Guessing is just
silly and will be problematic in the future when I implement routes
between network namespaces.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:33:02 +0000 (14:33 -0500)]
netfilter: Pass net to nf_dup_ipv4 and nf_dup_ipv6
This allows them to stop guessing the network namespace with pick_net.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:33:01 +0000 (14:33 -0500)]
netfilter: nf_tables: Use pkt->net instead of computing net from the passed net_devices
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:33:00 +0000 (14:33 -0500)]
netfilter: nf_tables: Pass struct net in nft_pktinfo
nft_pktinfo is passed on the stack so this does not bloat any in core
data structures.
By centrally computing this information this makes maintence of the code
simpler, and understading of the code easier.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:32:59 +0000 (14:32 -0500)]
netfilter: x_tables: Use par->net instead of computing from the passed net devices
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:32:58 +0000 (14:32 -0500)]
netfilter: x_tables: Pass struct net in xt_action_param
As xt_action_param lives on the stack this does not bloat any
persistent data structures.
This is a first step in making netfilter code that needs to know
which network namespace it is executing in simpler.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:32:57 +0000 (14:32 -0500)]
netfilter: nf_tables: kill nft_pktinfo.ops
- Add nft_pktinfo.pf to replace ops->pf
- Add nft_pktinfo.hook to replace ops->hooknum
This simplifies the code, makes it more readable, and likely reduces
cache line misses. Maintainability is enhanced as the details of
nft_hook_ops are of no concern to the recpients of nft_pktinfo.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:32:56 +0000 (14:32 -0500)]
inet netfilter: Prefer state->hook to ops->hooknum
The values of nf_hook_state.hook and nf_hook_ops.hooknum must be the
same by definition.
We are more likely to access the fields in nf_hook_state over the
fields in nf_hook_ops so with a little luck this results in
fewer cache line misses, and slightly more consistent code.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:32:55 +0000 (14:32 -0500)]
inet netfilter: Remove hook from ip6t_do_table, arp_do_table, ipt_do_table
The values of ops->hooknum and state->hook are guaraneted to be equal
making the hook argument to ip6t_do_table, arp_do_table, and
ipt_do_table is unnecessary. Remove the unnecessary hook argument.
In the callers use state->hook instead of ops->hooknum for clarity and
to reduce the number of cachelines the callers touch.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric W. Biederman [Fri, 18 Sep 2015 19:32:54 +0000 (14:32 -0500)]
netfilter: ebtables: Simplify the arguments to ebt_do_table
Nearly everything thing of interest to ebt_do_table is already present
in nf_hook_state. Simplify ebt_do_table by just passing in the skb,
nf_hook_state, and the table. This make the code easier to read and
maintenance easier.
To support this create an nf_hook_state on the stack in ebt_broute
(the only caller without a nf_hook_state already available). This new
nf_hook_state adds no new computations to ebt_broute, but does use a
few more bytes of stack.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Fri, 18 Sep 2015 19:03:32 +0000 (21:03 +0200)]
Merge tag 'ipvs-for-v4.4' of https://git./linux/kernel/git/horms/ipvs-next
Simon Horman says:
====================
IPVS Updates for v4.4
please consider these IPVS Updates for v4.4.
The updates include the following from Alex Gartrell:
* Scheduling of ICMP
* Sysctl to ignore tunneled packets; and hence some packet-looping scenarios
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Szymon Janc [Wed, 16 Sep 2015 18:21:54 +0000 (20:21 +0200)]
Bluetooth: Fix reporting incorrect EIR in device found mgmt event
Some remote devices (ie Gigaset G-Tag) misbehave with ADV data length.
This can lead to incorrect EIR format in device found event when
ADV_DATA and SCAN_RSP are merged (terminator field before SCAN_RSP
part).
Fix this by inspecting ADV_DATA and correct its length if terminator
is found.
> HCI Event: LE Meta Event (0x3e) plen 42 [hci0] 32.172182
LE Advertising Report (0x02)
Num reports: 1
Event type: Connectable undirected - ADV_IND (0x00)
Address type: Public (0x00)
Address: 7C:2F:80:94:97:5A (Gigaset Communications GmbH)
Data length: 30
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Company: Gigaset Communications GmbH (384)
Data:
021512348094975abbc5
16-bit Service UUIDs (partial): 1 entry
Battery Service (0x180f)
RSSI: -65 dBm (0xbf)
> HCI Event: LE Meta Event (0x3e) plen 27 [hci0] 32.172191
LE Advertising Report (0x02)
Num reports: 1
Event type: Scan response - SCAN_RSP (0x04)
Address type: Public (0x00)
Address: 7C:2F:80:94:97:5A (Gigaset Communications GmbH)
Data length: 15
Name (complete): Gigaset G-tag
RSSI: -59 dBm (0xc5)
Note "Data length: 30" in ADV_DATA which results in 9 extra zero bytes
after Battery Service UUID. Terminator field present in the middle of
EIR in Device Found event resulted in userspace stop parsing EIR and
skipping device name.
@ Device Found: 7C:2F:80:94:97:5A (1) rssi -59 flags 0x0000
02 01 06 0d ff 80 01 02 15 12 34 80 94 97 5a bb ..........4...Z.
c5 03 02 0f 18 00 00 00 00 00 00 00 00 00 0e 09 ................
47 69 67 61 73 65 74 20 47 2d 74 61 67 Gigaset G-tag
With this fix EIR with merged ADV_DATA and SCAN_RSP in device found
event is properly formatted:
@ Device Found: 7C:2F:80:94:97:5A (1) rssi -59 flags 0x0000
02 01 06 0d ff 80 01 02 15 12 34 80 94 97 5a bb ..........4...Z.
c5 03 02 0f 18 0e 09 47 69 67 61 73 65 74 20 47 .......Gigaset G
2d 74 61 67 -tag
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Szymon Janc [Wed, 16 Sep 2015 18:21:53 +0000 (20:21 +0200)]
Bluetooth: Add BT_ERR_RATELIMITED
This patch adds ratelimited version of the BT_ERR macro.
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Eric Dumazet [Thu, 17 Sep 2015 23:37:13 +0000 (16:37 -0700)]
sch_dsmark: improve memory locality
Memory placement in sch_dsmark is silly : Better place mask/value
in the same cache line.
Also, we can embed small arrays in the first cache line and
remove a potential cache miss.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Sep 2015 05:17:14 +0000 (22:17 -0700)]
Merge branch 'bcmgenet-irq-coalesce'
Florian Fainelli says:
====================
net: bcmgenet: Interrupt coalescing
This patch series adds support for interrupt coalescing for GENET
adapters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 16 Sep 2015 23:47:40 +0000 (16:47 -0700)]
net: bcmgenet: Implement RX coalescing control knobs
Add support for the ethtool rx-frames coalescing parameter which allows
defining the number of RX interrupts per frames received. The RDMA
engine supports a configurable timeout with a resolution of
approximately 8.192 us.
We can no longer enable the BDONE/PDONE interrupts as those would
fire for each packet/buffer received, which would defeat the MBDONE
interrupt purpose. The MBDONE interrupt is guaranteed to correspond to a
PDONE/BDONE interrupt when the threshold is set to 1.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 16 Sep 2015 23:47:39 +0000 (16:47 -0700)]
net: bcmgenet: Implement TX coalescing control knobs
Configuring the ethtool tx-frames property, which translates into N
packets before a TX interrupt is the simplest configuration scheme
because it requires no locking neither at the softare nor hardware
level, and is completely indepedent from the link speed. Since ethtool
does not allow per-tx queue coalescing parameters, we apply the same
setting to any transmit queue.
We can no longer enable the BDONE/PDONE interrupts as those would fire
for each packet/buffer received, which would defeat the MBDONE interrupt
purpose. The MBDONE interrupt is guaranteed to correspond to a
PDONE/BDONE interrupt when the threshold is set to 1, but offers
interrupt coalescing when the value is > 1.
Since the HW is configured to generate an interrupt when the ring
becomes emtpy, we have to deny any timeout/timer settings coming from
user-space to indicate we can only generate an interrupt very <N>
packets.
While we are at it, fix the DMA_INTR_THRESHOLD_MASK value which was off
by one bit (0xff vs. 0x1ff).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung.Huh@microchip.com [Wed, 16 Sep 2015 23:41:19 +0000 (23:41 +0000)]
lan78xx: Remove not defined MAC_CR_GMII_EN_ bit from MAC_CR.
Remove not defined MAC_CR_GMII_EN_ bit from MAC_CR.
Signed-off-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung.Huh@microchip.com [Wed, 16 Sep 2015 23:41:14 +0000 (23:41 +0000)]
lan78xx: Create lan78xx_get_mdix_status() and lan78xx_set_mdix_status() for MDIX control.
Create lan78xx_get_mdix_status() and lan78xx_set_mdix_status() for MDIX control.
Signed-off-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung.Huh@microchip.com [Wed, 16 Sep 2015 23:41:07 +0000 (23:41 +0000)]
lan78xx: Remove phy defines in lan78xx.h and use defines in include/linux/microchipphy.h
Remove phy defines in lan78xx.h and use defines in include/linux/microchipphy.h.
Signed-off-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung.Huh@microchip.com [Wed, 16 Sep 2015 23:40:54 +0000 (23:40 +0000)]
lan78xx: Update to use phylib instead of mii_if_info.
Update to use phylib instead of mii_if_info.
Signed-off-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung.Huh@microchip.com [Wed, 16 Sep 2015 23:40:47 +0000 (23:40 +0000)]
lan78xx: Add PHYLIB and MICROCHIP_PHY as default config.
Add PHYLIB and MICROCHIP_PHY as default configuration for lan78xx.
Signed-off-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung.Huh@microchip.com [Wed, 16 Sep 2015 23:40:39 +0000 (23:40 +0000)]
lan78xx: Check device ready bit (PMT_CTL_READY_) after reset the PHY
Check device ready bit (PMT_CTL_READY_) after reset the PHY.
Device may not be ready even if PHY_RST_ is cleared depends on configuration.
Signed-off-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Wed, 16 Sep 2015 16:16:39 +0000 (10:16 -0600)]
net: Initialize table in fib result
Sergey, Richard and Fabio reported an oops in ip_route_input_noref. e.g., from Richard:
[ 0.877040] BUG: unable to handle kernel NULL pointer dereference at
0000000000000056
[ 0.877597] IP: [<
ffffffff8155b5e2>] ip_route_input_noref+0x1a2/0xb00
[ 0.877597] PGD
3fa14067 PUD
3fa6e067 PMD 0
[ 0.877597] Oops: 0000 [#1] SMP
[ 0.877597] Modules linked in: virtio_net virtio_pci virtio_ring virtio
[ 0.877597] CPU: 1 PID: 119 Comm: ifconfig Not tainted 4.2.0+ #1
[ 0.877597] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.877597] task:
ffff88003fab0bc0 ti:
ffff88003faa8000 task.ti:
ffff88003faa8000
[ 0.877597] RIP: 0010:[<
ffffffff8155b5e2>] [<
ffffffff8155b5e2>] ip_route_input_noref+0x1a2/0xb00
[ 0.877597] RSP: 0018:
ffff88003ed03ba0 EFLAGS:
00010202
[ 0.877597] RAX:
0000000000000046 RBX:
00000000ffffff8f RCX:
0000000000000020
[ 0.877597] RDX:
ffff88003fab50b8 RSI:
0000000000000200 RDI:
ffffffff8152b4b8
[ 0.877597] RBP:
ffff88003ed03c50 R08:
0000000000000000 R09:
0000000000000000
[ 0.877597] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff88003fab6f00
[ 0.877597] R13:
ffff88003fab5000 R14:
0000000000000000 R15:
ffffffff81cb5600
[ 0.877597] FS:
00007f6de5751700(0000) GS:
ffff88003ed00000(0000) knlGS:
0000000000000000
[ 0.877597] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 0.877597] CR2:
0000000000000056 CR3:
000000003fa6d000 CR4:
00000000000006e0
[ 0.877597] Stack:
[ 0.877597]
0000000000000000 0000000000000046 ffff88003fffa600 ffff88003ed03be0
[ 0.877597]
ffff88003f9e2c00 697da8c0017da8c0 ffff880000000000 000000000007fd00
[ 0.877597]
0000000000000000 0000000000000046 0000000000000000 0000000400000000
[ 0.877597] Call Trace:
[ 0.877597] <IRQ>
[ 0.877597] [<
ffffffff812bfa1f>] ? cpumask_next_and+0x2f/0x40
[ 0.877597] [<
ffffffff8158e13c>] arp_process+0x39c/0x690
[ 0.877597] [<
ffffffff8158e57e>] arp_rcv+0x13e/0x170
[ 0.877597] [<
ffffffff8151feec>] __netif_receive_skb_core+0x60c/0xa00
[ 0.877597] [<
ffffffff81515795>] ? __build_skb+0x25/0x100
[ 0.877597] [<
ffffffff81515795>] ? __build_skb+0x25/0x100
[ 0.877597] [<
ffffffff81521ff6>] __netif_receive_skb+0x16/0x70
[ 0.877597] [<
ffffffff81522078>] netif_receive_skb_internal+0x28/0x90
[ 0.877597] [<
ffffffff8152288f>] napi_gro_receive+0x7f/0xd0
[ 0.877597] [<
ffffffffa0017906>] virtnet_receive+0x256/0x910 [virtio_net]
[ 0.877597] [<
ffffffffa0017fd8>] virtnet_poll+0x18/0x80 [virtio_net]
[ 0.877597] [<
ffffffff815234cd>] net_rx_action+0x1dd/0x2f0
[ 0.877597] [<
ffffffff81053228>] __do_softirq+0x98/0x260
[ 0.877597] [<
ffffffff8164969c>] do_softirq_own_stack+0x1c/0x30
The root cause is use of res.table uninitialized.
Thanks to Nikolay for noticing the uninitialized use amongst the maze of
gotos.
As Nikolay pointed out the second initialization is not required to fix
the oops, but rather to fix a related problem where a valid lookup should
be invalidated before creating the rth entry.
Fixes: b7503e0cdb5d ("net: Add FIB table id to rtable")
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reported-by: Richard Alpe <richard.alpe@ericsson.com>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Sep 2015 04:09:07 +0000 (21:09 -0700)]
Merge branch 'bpf_avoid_clone'
Alexei Starovoitov says:
====================
bpf: performance improvements
v1->v2: dropped redundant iff_up check in patch 2
At plumbers we discussed different options on how to get rid of skb_clone
from bpf_clone_redirect(), the patch 2 implements the best option.
Patch 1 adds 'integrated exts' to cls_bpf to improve performance by
combining simple actions into bpf classifier.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Wed, 16 Sep 2015 06:05:43 +0000 (23:05 -0700)]
bpf: add bpf_redirect() helper
Existing bpf_clone_redirect() helper clones skb before redirecting
it to RX or TX of destination netdev.
Introduce bpf_redirect() helper that does that without cloning.
Benchmarked with two hosts using 10G ixgbe NICs.
One host is doing line rate pktgen.
Another host is configured as:
$ tc qdisc add dev $dev ingress
$ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \
action bpf run object-file tcbpf1_kern.o section clone_redirect_xmit drop
so it receives the packet on $dev and immediately xmits it on $dev + 1
The section 'clone_redirect_xmit' in tcbpf1_kern.o file has the program
that does bpf_clone_redirect() and performance is 2.0 Mpps
$ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \
action bpf run object-file tcbpf1_kern.o section redirect_xmit drop
which is using bpf_redirect() - 2.4 Mpps
and using cls_bpf with integrated actions as:
$ tc filter add dev $dev root pref 10 \
bpf run object-file tcbpf1_kern.o section redirect_xmit integ_act classid 1
performance is 2.5 Mpps
To summarize:
u32+act_bpf using clone_redirect - 2.0 Mpps
u32+act_bpf using redirect - 2.4 Mpps
cls_bpf using redirect - 2.5 Mpps
For comparison linux bridge in this setup is doing 2.1 Mpps
and ixgbe rx + drop in ip_rcv - 7.8 Mpps
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 16 Sep 2015 06:05:42 +0000 (23:05 -0700)]
cls_bpf: introduce integrated actions
Often cls_bpf classifier is used with single action drop attached.
Optimize this use case and let cls_bpf return both classid and action.
For backwards compatibility reasons enable this feature under
TCA_BPF_FLAG_ACT_DIRECT flag.
Then more interesting programs like the following are easier to write:
int cls_bpf_prog(struct __sk_buff *skb)
{
/* classify arp, ip, ipv6 into different traffic classes
* and drop all other packets
*/
switch (skb->protocol) {
case htons(ETH_P_ARP):
skb->tc_classid = 1;
break;
case htons(ETH_P_IP):
skb->tc_classid = 2;
break;
case htons(ETH_P_IPV6):
skb->tc_classid = 3;
break;
default:
return TC_ACT_SHOT;
}
return TC_ACT_OK;
}
Joint work with Daniel Borkmann.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Junwei Zhang [Fri, 18 Sep 2015 04:00:05 +0000 (00:00 -0400)]
net: only check perm protocol when register proto
The permanent protocol nodes are at the head of the list,
So only need check all these nodes.
No matter the new node is permanent or not,
insert the new node after the last permanent protocol node,
If the new node conflicts with existing permanent node,
return error.
Signed-off-by: Martin Zhang <martinbj2008@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 15 Sep 2015 22:24:28 +0000 (15:24 -0700)]
bonding: use l4 hash if available
If skb carries a l4 hash, no need to perform a flow dissection.
Performance is slightly better :
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.39012e+06
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.39393e+06
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.39988e+06
After patch :
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.43579e+06
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.44304e+06
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.44312e+06
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 15 Sep 2015 22:24:20 +0000 (15:24 -0700)]
tcp: provide skb->hash to synack packets
In commit
b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf
on xmit"), Tom provided a l4 hash to most outgoing TCP packets.
We'd like to provide one as well for SYNACK packets, so that all packets
of a given flow share same txhash, to later enable bonding driver to
also use skb->hash to perform slave selection.
Note that a SYNACK retransmit shuffles the tx hash, as Tom did
in commit
265f94ff54d62 ("net: Recompute sk_txhash on negative routing
advice") for established sockets.
This has nice effect making TCP flows resilient to some kind of black
holes, even at connection establish phase.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This page took 0.049148 seconds and 5 git commands to generate.