Tom Tromey [Wed, 27 May 2020 15:13:48 +0000 (11:13 -0400)]
Add "objfile" parameter to two partial_symtab methods
This series will cause partial symtabs to be shared across objfiles.
However, full symtabs and symbols will still be objfile-dependent, so
will be expanded separately for each objfile. So, a debug info reader
will need to know which objfile to consult when expanding a partial
symtab.
This patch adds an objfile parameter to the two relevant methods of
partial_symtab. Current implementations simply ignore them.
gdb/ChangeLog:
* psymtab.c (partial_map_expand_apply)
(psym_find_pc_sect_compunit_symtab, psym_lookup_symbol)
(psym_lookup_global_symbol_language)
(psymtab_to_symtab, psym_find_last_source_symtab, dump_psymtab)
(psym_print_stats, psym_expand_symtabs_for_function)
(psym_map_symbol_filenames, psym_map_matching_symbols)
(psym_expand_symtabs_matching)
(partial_symtab::read_dependencies, maintenance_info_psymtabs)
(maintenance_check_psymtabs): Update.
* psympriv.h (struct partial_symtab) <readin_p,
get_compunit_symtab>: Add objfile parameter.
(struct standard_psymtab) <readin_p, get_compunit_symtab>:
Likewise.
* dwarf2/read.c (struct dwarf2_include_psymtab) <readin_p,
get_compunit_symtab>: Likewise.
(dwarf2_psymtab::expand_psymtab): Pass objfile argument.
Change-Id: I3f0b26787c3e78f7fb78b9fc011d91fb8690f3a0
Tom Tromey [Wed, 27 May 2020 15:13:48 +0000 (11:13 -0400)]
Introduce dwarf2_per_objfile::obstack
Currently much of the DWARF-related data is stored on the objfile
obstack. This prevents sharing this data across objfiles, so this patch
adds a new obstack to dwarf2_per_objfile. Note that the
dwarf2_per_objfile type is going to become "dwarf2_per_bfd" in a
subsequent patch, which is indeed going to be shared between objfiles.
One way to check whether this is correct is to look at the remaining
uses of objfile_obstack in the DWARF code and note that they all
appear in the "full CU" code paths.
The converse -- storing per-objfile data on the shared obstack -- is
not good, but it is just a memory leak, not a potential
use-after-free. Double-checking this would also be useful, though.
gdb/ChangeLog:
* dwarf2/read.h (struct dwarf2_per_objfile) <obstack>: New
member.
* dwarf2/read.c (delete_file_name_entry): Fix comment.
(create_cu_from_index_list)
(create_signatured_type_table_from_index)
(create_signatured_type_table_from_debug_names)
(dw2_get_file_names_reader, dwarf2_initialize_objfile)
(dwarf2_create_include_psymtab)
(create_debug_type_hash_table, add_type_unit)
(create_type_unit_group, read_comp_units_from_section)
(dwarf2_compute_name, create_cus_hash_table)
(create_dwp_hash_table, create_dwo_unit_in_dwp_v1)
(create_dwo_unit_in_dwp_v2, open_and_init_dwp_file): Use new
obstack.
(dw2_get_real_path): Likewise. Change argument to
dwarf2_per_objfile.
Change-Id: Icdec7be7c4d9f33d1dce4f807284f3077f7d3f03
Luis Machado [Sat, 16 May 2020 02:06:52 +0000 (23:06 -0300)]
Fix PR 26000, logical bitwise error / prologue analyzer
This fixes an instruction mask typo. We should be matching only
ldrd (immediate) and not any other of its variants. As is, it never matches
anything.
With the patch, the instruction mask also allows matching of ldrd (literal),
but the check for SP discards this particular instruction pattern, as it has
a hardcoded PC register.
gdb/ChangeLog:
2020-05-27 Luis Machado <luis.machado@linaro.org>
PR tdep/26000
* arm-tdep.c (thumb_analyze_prologue): Fix instruction matching
for ldrd (immediate).
Luis Machado [Mon, 25 May 2020 16:25:50 +0000 (13:25 -0300)]
Fix some duplicate test names
While doing a testsuite run on aarch64-linux, I noticed a bunch of duplicated
test name results. It annoyed me a little, so I decided to go ahead and fix the
worst offenders.
The following patch brings the duplicate test names down from 461 to 137.
The remaining ones are mostly scattered across the testsuite, with 1 to 3
duplicates per testcase. We can fix those as we go.
gdb/testsuite/ChangeLog:
2020-05-27 Luis Machado <luis.machado@linaro.org>
* gdb.arch/aarch64-sighandler-regs.exp: Fix duplicated test names.
* gdb.arch/aarch64-tagged-pointer.exp: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/arm-disp-step.exp: Likewise.
* gdb.arch/thumb-prologue.exp: Likewise.
* gdb.base/async.exp: Likewise.
* gdb.base/auxv.exp: Likewise.
* gdb.base/complex-parts.exp: Likewise.
* gdb.base/ena-dis-br.exp: Likewise.
* gdb.base/foll-exec.exp: Likewise.
* gdb.base/permissions.exp: Likewise.
* gdb.base/relocate.exp: Likewise.
* gdb.base/return2.exp: Likewise.
* gdb.base/sigbpt.exp: Likewise.
* gdb.base/siginfo-obj.exp: Likewise.
* gdb.cp/converts.exp: Likewise.
* gdb.cp/exceptprint.exp: Likewise.
* gdb.cp/inherit.exp: Likewise.
* gdb.cp/nsnoimports.exp: Likewise.
* gdb.cp/virtbase2.exp: Likewise.
* gdb.mi/mi-var-cmd.exp: Likewise.
* gdb.mi/var-cmd.c: Likewise.
H.J. Lu [Wed, 27 May 2020 11:53:54 +0000 (04:53 -0700)]
ld: Add --warn-textrel and obsolete --warn-shared-textrel
--warn-shared-textrel and -z text apply to both shared object and PIE.
Add --warn-textrel and obsolete --warn-shared-textrel. Consolidate
--warn-textrel and -z text/notext/textoff implementation.
bfd/
PR ld/22909
* elflink.c (bfd_elf_final_link): Use bfd_link_textrel_check.
Check bfd_link_dll when issue a DT_TEXTREL warning.
* elfxx-x86.c (maybe_set_textrel): Likewise.
(_bfd_x86_elf_size_dynamic_sections): Likewise.
include/
PR ld/22909
* bfdlink.h (textrel_check_method): New enum.
(bfd_link_textrel_check): New.
(bfd_link_info): Replace warn_shared_textrel and error_textrel
with textrel_check.
ld/
PR ld/22909
* NEWS: Mention --warn-textrel.
* ld.texi: Update -z text/notext/textoff. Add --warn-textrel.
Remove --warn-shared-textrel.
* ldlex.h (option_values): Rename OPTION_WARN_SHARED_TEXTREL to
OPTION_WARN_TEXTREL.
* lexsup.c (ld_options): Add --warn-textrel. Obsolete
--warn-shared-textrel.
(parse_args): Updated.
(elf_shlib_list_options): Check link_info.textrel_check.
* emultempl/elf.em: Updated.
* testsuite/ld-elf/pr19539.d: Replace -z notext with
--warn-textrel. Expect a warning.
* testsuite/ld-i386/warn1.d: Update expected warning.
Sandra Loosemore [Wed, 27 May 2020 06:23:03 +0000 (23:23 -0700)]
Fix extraction of signed constants in nios2 disassembler (again).
In commit
6031ac352c05c5c9f44e24fa1c5a8222a7a7d02d I added some casts
to explicitly do conversions from unsigned to signed as 32-bit
quantities to address some bugs with different sizes of long and
bfd_signed_vma. Those casts were removed in the rewrite of the
sign-extension logic in commit
1d61b032265e69317f42e8019e072506f11890c5,
reintroducing the same bugs. This patch restores the casts.
2020-05-26 Sandra Loosemore <sandra@codesourcery.com>
opcodes/
* nios2-dis.c (nios2_print_insn_arg): Add explicit casts to
extractions of signed fields.
GDB Administrator [Wed, 27 May 2020 00:00:17 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Tue, 26 May 2020 21:25:19 +0000 (14:25 -0700)]
ld: Skip some x86 ifunc tests for lynxos and nto
On lynxos and nto:
regexp_diff match failure
regexp "^Relocation section '.rel(a|).plt' at offset 0x[0-9a-f]+ contains 1 entry:$"
line "Relocation section '.rel.dyn' at offset 0x74 contains 1 entry:"
FAIL: ld-ifunc/ifunc-23a-x86
* testsuite/ld-ifunc/ifunc-23a-x86.d: Skip *-*-lynxos *-*-nto*.
* testsuite/ld-ifunc/ifunc-24a-x86.d: Likewise.
* testsuite/ld-ifunc/ifunc-25a-x86.d: Likewise.
H.J. Lu [Tue, 26 May 2020 21:17:09 +0000 (14:17 -0700)]
gas: Adjust x86 tests for PECOFF
* testsuite/gas/i386/align-branch-9.d: Updated for PECOFF.
* testsuite/gas/i386/inval-avx512f.s: Add .p2align for PECOFF.
* testsuite/gas/i386/inval-avx512f.l: Updated.
Philippe Waroquiers [Sat, 23 May 2020 13:11:52 +0000 (15:11 +0200)]
Ensure class_tui is listed in the output of "help" giving the list of classes.
Before this change, "help" was not showing the TUI class.
With this change:
(gdb) help
...
support -- Support facilities.
text-user-interface -- TUI is the GDB text based interface.
tracepoints -- Tracing of program execution without stopping the program.
...
(gdb) help text-user-interface
TUI is the GDB text based interface.
In TUI mode, GDB can display several text windows showing
the source file, the processor registers, the program disassembly, ...
List of commands:
+ -- Scroll window forward.
...
Note that we cannot use "tui" for the fake class command name, as "tui"
is a command.
gdb/ChangeLog
2020-05-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* command.h: Add comment giving the name of class_tui.
* cli/cli-cmds.c (_initialize_cli_cmds): If TUI defined,
create the fake command for the help for class_tui.
Tom Tromey [Tue, 26 May 2020 20:11:08 +0000 (14:11 -0600)]
Handle indexing Ada arrays with enum indices
In Ada, like C, an enum can assign values to the constants. However,
unlike C (or any other language supported by gdb), the enum type can
also be used as the range of an array.
In this case, the user's code references the enum constants, but the
compiler translates these to the position of the constant in the enum.
So for example one might write:
type Enum_With_Gaps is
(
LIT0,
LIT1,
LIT2,
LIT3,
LIT4
);
for Enum_With_Gaps use
(
LIT0 => 3,
LIT1 => 5,
LIT2 => 8,
LIT3 => 13,
LIT4 => 21
);
Then index an array like "array(LIT3)" -- but this will be the 4th
element in an array of 5 elements, not the 13th element in an array of
19 (assuming I did the math right) elements.
gdb supports this to some degree, with the only missing piece being
indexing into such an array. This patch implements this missing
feature, and also fixes an existing bug, which is that in some
situations I believe gdb would mis-compute the resulting array's
length.
The approach taken here is to try to integrate this feature into the
core of gdb. My view is that much of the Ada support should be better
integrated with gdb, rather than being "on the side". This, I think,
would help avoid code duplication at least. So, I try to take steps
toward this goal when possible.
Because other languages generally don't allow the user to specify the
index type of an array, I simply made the core of gdb unconditionally
apply discrete_position when computing the range of such an array.
This is a no-op for ordinary types, but applies the enum
value-to-position transformation for TYPE_CODE_ENUM.
gdb/ChangeLog
2020-05-26 Tom Tromey <tromey@adacore.com>
* ada-lang.c (ada_print_array_index): Change type. Call val_atr.
(ada_value_ptr_subscript): Don't call pos_atr on the lower bound.
(val_atr): New function.
(value_val_atr): Use it.
* ada-valprint.c (print_optional_low_bound): Change low bound
handling for enums.
(val_print_packed_array_elements): Don't call discrete_position.
* gdbtypes.c (get_discrete_bounds) <TYPE_CODE_RANGE>: Call
discrete_position for enum types.
* language.c (default_print_array_index): Change type.
* language.h (struct language_defn) <la_print_array_index>: Add
index_type parameter, change type of index_value.
(LA_PRINT_ARRAY_INDEX): Add index_type parameter.
(default_print_array_index): Update.
* valprint.c (maybe_print_array_index): Don't call
value_from_longest. Update.
(value_print_array_elements): Don't call discrete_position.
gdb/testsuite/ChangeLog
2020-05-26 Tom Tromey <tromey@adacore.com>
* gdb.ada/arr_acc_idx_w_gap.exp: Add tests.
Tom Tromey [Tue, 26 May 2020 20:11:08 +0000 (14:11 -0600)]
Fix bugs in 'val and 'pos with range types
In Ada, the 'val and 'pos attributes can be used to map from an
enumeration constant to its position in the enum and vice versa.
These operators did not work properly when the type in question was a
subrange of an enum type with "holes".
gdb/ChangeLog
2020-05-26 Tom Tromey <tromey@adacore.com>
* ada-lang.c (value_val_atr): Handle TYPE_CODE_RANGE.
* gdbtypes.c (discrete_position): Handle TYPE_CODE_RANGE.
gdb/testsuite/ChangeLog
2020-05-26 Tom Tromey <tromey@adacore.com>
* gdb.ada/arr_acc_idx_w_gap.exp: Add enum subrange tests.
* gdb.ada/arr_acc_idx_w_gap/enum_with_gap.ads (Enum_Subrange): New
type.
* gdb.ada/arr_acc_idx_w_gap/enum_with_gap_main.adb (V): New
variable.
Christian Biesinger via Gdb-patches [Tue, 26 May 2020 16:58:04 +0000 (11:58 -0500)]
Use = instead of == for better portability
Reported by sobukus on IRC.
gdb/testsuite/ChangeLog:
2020-05-26 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Use = instead of == for the test command
for portability.
Change-Id: I431ccfa5e5ba15f9af082ffd6aa8cd7046456cd2
Stefan Schulze Frielinghaus [Tue, 26 May 2020 16:34:39 +0000 (18:34 +0200)]
ChangeLog entries for
f687f5f563
H.J. Lu [Tue, 26 May 2020 16:33:48 +0000 (09:33 -0700)]
tc-xgate.c: Replace R_XGATE_PCREL_X with BFD_RELOC_XGATE_PCREL_X
Replace R_XGATE_PCREL_X with BFD_RELOC_XGATE_PCREL_X to silence GCC 10
warning:
gas/config/tc-xgate.c:1339:5: error: implicit conversion from ‘enum elf_xgate_reloc_type’ to ‘bfd_reloc_code_real_type’ {aka ‘enum bfd_reloc_code_real’} [-Werror=enum-conversion]
1339 | R_XGATE_PCREL_9);
| ^~~~~~~~~~~~~~~
PR gas/26044
* config/tc-xgate.c (md_apply_fix): Check BFD_RELOC_XGATE_PCREL_X
instead of R_XGATE_PCREL_X.
(xgate_parse_operand): Replace R_XGATE_PCREL_X with
BFD_RELOC_XGATE_PCREL_X.
Stefan Schulze Frielinghaus [Mon, 18 May 2020 15:22:57 +0000 (17:22 +0200)]
S/390: z13: Accept vector alignment hints
Accept vector alignment hints on z13 although they are ignored there.
The advantage is that any binary compiled for architecture level z13 may
run on z14 or later and benefit from vector alignment hints.
gas/ChangeLog:
2020-05-18 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
* testsuite/gas/s390/zarch-z13.d: Add regexp checks for vector
load/store instruction variants with alignment hints.
* testsuite/gas/s390/zarch-z13.s: Emit new vector load/store
instruction variants with alignment hints.
opcodes/ChangeLog:
2020-05-18 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
* s390-opc.txt: Relocate vector load/store instructions with
additional alignment parameter and change architecture level
constraint from z14 to z13.
H.J. Lu [Tue, 26 May 2020 14:54:05 +0000 (07:54 -0700)]
gas: Silence GCC 10 warning on tc-visium.c
PR gas/26044
* config/tc-visium.c (md_convert_frag): Replace fragP->fr_literal
with &fragP->fr_literal[0].
H.J. Lu [Tue, 26 May 2020 14:41:07 +0000 (07:41 -0700)]
gas: Silence GCC 10 warning tc-vax.c
PR gas/26044
* config/tc-vax.c (md_estimate_size_before_relax): Replace
fragP->fr_literal with &fragP->fr_literal[0].
(md_convert_frag): Likewise.
H.J. Lu [Tue, 26 May 2020 13:56:18 +0000 (06:56 -0700)]
gas: Silence GCC 10 warning on tc-v850.c
PR gas/26044
* config/tc-v850.c (md_convert_frag): Replace fragP->fr_literal
with &fragP->fr_literal[0].
H.J. Lu [Tue, 26 May 2020 13:46:26 +0000 (06:46 -0700)]
gas: Silence GCC 10 warning on tc-crx.c
opcode/crx.h has
typedef enum
{
...
MAX_REG
}
reg;
typedef enum
{
c0 = MAX_REG,
}
copreg;
tc-crx.c has
static int
getreg_image (reg r)
{
...
/* Check whether the register is in registers table. */
if (r < MAX_REG)
rreg = &crx_regtab[r];
/* Check whether the register is in coprocessor registers table. */
else if (r < (int) MAX_COPREG)
rreg = &crx_copregtab[r-MAX_REG];
}
Change getreg_image's argument type to int and replace fragP->fr_literal
with &fragP->fr_literal[0] to silence GCC 10 warning.
PR gas/26044
* config/tc-crx.c (getreg_image): Change argument type to int.
(md_convert_frag): Replace fragP->fr_literal with
&fragP->fr_literal[0].
Nick Clifton [Tue, 26 May 2020 13:49:42 +0000 (14:49 +0100)]
Extend the error message displayed when a plugin fails to load.
* plugin.c (try_load_plugin): Extend error message when a plugin
fails to open.
H.J. Lu [Tue, 26 May 2020 13:09:54 +0000 (06:09 -0700)]
tc-score.c: Replace overlapping sprintf with memmove
Fix GCC 10 warning:
gas/config/tc-score.c:4575:6: error: ‘sprintf’ argument 3 may overlap destination object ‘keep_data’ [-Werror=restrict]
4575 | sprintf (append_str, "bne %s", keep_data);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PR gas/26044
* onfig/tc-score.c (s3_do_macro_bcmp): Replace overlapping
sprintf with memmove.
Tom de Vries [Tue, 26 May 2020 09:35:32 +0000 (11:35 +0200)]
[gdb/testsuite] Add test-case gold-gdb-index.exp
There's a PR binutils/15646 - "gold-generated .gdb_index has duplicated
symbols that gdb-generated index doesn't", and gdb contains a workaround,
added in commit
8943b87476 "Work around gold/15646".
Add a test-case testing this workaround.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-26 Tom de Vries <tdevries@suse.de>
* gdb.base/gold-gdb-index-2.c: New test.
* gdb.base/gold-gdb-index.c: New test.
* gdb.base/gold-gdb-index.exp: New file.
* gdb.base/gold-gdb-index.h: New test.
H.J. Lu [Tue, 26 May 2020 02:37:54 +0000 (19:37 -0700)]
gas: Silence GCC 10 warning on tc-mcore.c
* config/tc-mcore.c (md_convert_frag): Replace fragP->fr_literal
with &fragP->fr_literal[0].
H.J. Lu [Tue, 26 May 2020 02:29:22 +0000 (19:29 -0700)]
tc-cr16.c: Use memmove to concatenate 2 overlapping strings
PR gas/26041
* config/tc-cr16.c (md_assemble): Use memmove to concatenate
2 overlapping strings.
GDB Administrator [Tue, 26 May 2020 00:00:13 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Mon, 25 May 2020 23:17:50 +0000 (16:17 -0700)]
gas: Silence GCC 10 warning on tc-cr16.c
* config/tc-cr16.c (md_convert_frag): Replace fragP->fr_literal
with &fragP->fr_literal[0].
H.J. Lu [Mon, 25 May 2020 18:26:48 +0000 (11:26 -0700)]
ELF: Updated comments for ET_EXEC and ET_DYN
include/elf/common.h has
#define ET_EXEC 2 /* Executable file */
#define ET_DYN 3 /* Shared object file */
These predate PIE:
https://groups.google.com/forum/#!topic/generic-abi/mBKlSNldFW4
Updated comments to
#define ET_EXEC 2 /* Position-dependent executable file */
#define ET_DYN 3 /* Position-independent executable or
shared object file */
* elf/common.h: Update comments for ET_EXEC and ET_DYN.
Tom de Vries [Mon, 25 May 2020 17:36:05 +0000 (19:36 +0200)]
[gdb/testsuite] Add target board gold-gdb-index
Add new target board that uses gold to add a .gdb_index section, enabled by
-ggnu-pubnames.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-25 Tom de Vries <tdevries@suse.de>
* boards/gold-gdb-index.exp: New file.
Cristiano De Alti [Mon, 25 May 2020 15:55:56 +0000 (11:55 -0400)]
gdb: make avr_integer_to_address generate code or data address based on type
The AVR architecture is a Harvard one, meaning it has different memory
spaces for code and data. In GDB, this is dealt with by having the data
(SRAM) addresses start at 0x00800000. When interpreting an integer as
an address (converting to a CORE_ADDR), we currently always generate a
data address. This doesn't work for some cases described below, where
the integer is meant to represent a code address.
This patch changes avr_integer_to_address so that it generates the
correct type of address (code or data) based on the passed type.
Using the simavr.exp board, I didn't see any regressions when running
the gdb.base/*.exp tests. A few tests go from fail to pass, but none
from pass to fail. There are a few new fails and unresolved, but it's
just because some tests manage to make more progress before failing in a
different way.
In practice, it fixes disassembling by address, as described in the PR:
- (gdb) disassemble 0x12a,0x12b
- Dump of assembler code from 0x12a to 0x12b:
- 0x0000012a <main+0>: push r28
- End of assembler dump.
+ (gdb) disassemble 0x12a,0x12b
+ Dump of assembler code from 0x80012a to 0x80012b:
+ 0x0080012a: nop
+ End of assembler dump.
And also, setting a breakpoint by address:
- (gdb) p &main
- $1 = (int (*)(void)) 0x12a <main>
- (gdb) b *0x12a
- Breakpoint 1 at 0x80012a
+ (gdb) p &main
+ $1 = (int (*)(void)) 0x12a <main>
+ (gdb) b *0x12a
+ Breakpoint 1 at 0x12a: file test-avr.c, line 3.
+ Note: automatically using hardware breakpoints for read-only addresses.
gdb/ChangeLog:
PR gdb/13519
* avr-tdep.c (avr_integer_to_address): Return data or code
address accordingly to the second 'type' argument of the
function.
Change-Id: Iaea1587d053e86f4ab8aebdcabec8d31a6d262cd
Simon Marchi [Mon, 25 May 2020 15:55:21 +0000 (11:55 -0400)]
gdb/testsuite: add simavr.exp board
This patch adds a board file for against a simavr target (so, for the
AVR architecture).
simavr, when started with option -g, runs a GDB stub on port 1234. In
the current latest release (1.6), the port is hardcoded to 1234. But in
master, there is the option to choose another port. So while the board
file hardcodes the port today, in the future it should be possible to
let the user choose a port, or automatically select a free port.
It is easy enough to run, make sure you have avr-gcc/avr-g++ and simavr
installed, and as usual just run:
make check RUNTESTFLAGS="--target_board=simavr"
The following environment variables influence the behavior of the board
file:
- SIMAVR_MCU: type of chip to simulate
- SIMAVR_PATH: path to simavr binary (useful if you build your own
simavr or for some reason it is not simply called `simavr`.
As expected, there are a lot of failures. Many tests use some features
not supported by such a target, and I suppose there are real GDB bugs
too. But a lot also passes (including tests that actually run stuff),
so this board file should still help to validate changes to the AVR
architecture support.
These are the results I got of running tests gdb.base/*.exp:
# of expected passes 20926
# of unexpected failures 2257
# of expected failures 14
# of unknown successes 1
# of known failures 13
# of unresolved testcases 592
# of untested testcases 156
# of unsupported tests 30
# of paths in test names 3
# of duplicate test names 56
gdb/testsuite/ChangeLog:
* boards/simavr.exp: New file.
Change-Id: Ib7fa8c4e2e90b08b104bb9b552df37779de3bc21
Simon Marchi [Mon, 25 May 2020 15:15:01 +0000 (11:15 -0400)]
gdb/testsuite: add inferior arguments test
Add a test for verifying different methods of passing arguments to the
inferior: the start, starti and run commands, as well as `set args`.
All these methods work naturally when using the unix or
native-extended-gdbserver target boards. Since those are non-stub
boards, GDB runs new inferiors and therefore pass arguments to them.
With target boards where GDB connects to a stub, for example with
native-gdbserver, they don't really make sense. The inferior process is
already started when GDB connects.
However, the "run" method is still tested with stub targets, because the
gdb_run_cmd procedure is adapted for stub targets. Instead of issuing
the `run` command, it spawns whatever program is supposed to bring up
the stub (gdbserver, for example) using gdb_reload and makes GDB connect
to it. So this allows us to exercise argument passing through the
gdbserver command line, when testing with the native-gdbserver board.
Note that there is already a gdb.base/args.exp, but this tests
specifically the --args switch of GDB. Perhaps it could be integrated
in this new test, as a new "method".
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_run_cmd): Return success or failure.
* gdb.base/inferior-args.exp: New file.
* gdb.base/inferior-args.c: New file.
Change-Id: Ib61ea6220a47f9f67aed2960dcacd240cb57af70
Simon Marchi [Mon, 25 May 2020 15:15:01 +0000 (11:15 -0400)]
gdb/testsuite: support passing inferior arguments with native-gdbserver board
This patch makes it possible to run tests requiring passing arguments to
the inferior with the native-gdbserver board. The end goal is to write
a test that verifies passing arguments to the inferior works, and to
have that test exercise inferior arguments passed on the gdbserver
command line, when using the native-gdbserver target board (in addition
to the other boards). This is done in the next patch.
With the native-gdbserver target board, gdbserver is started in
gdb_reload (implemented in config/gdbserver.exp), called in gdb_run_cmd.
gdb_run_cmd already supposedly accepts inferior arguments (although that
feature does not seem to be used anywhere), which it passes to the `run`
command, for non-stub target boards. I've changed gdb_run_cmd so that
it forwards these arguments to gdb_reload as well. gdb_reload passes
them to gdbserver_run, and they eventually make their way to the
gdbserver command line.
gdb_run_cmd currently accepts `args` (the varargs of tcl), which means
it receives inferior arguments as a list. This won't work with
arguments with spaces, because they will end up being formatted with
curly braces like this:
% set args [list hello "with spaces" world]
hello {with spaces} world
% puts "run $args"
run hello {with spaces} world
I've changed it to accept a single string that is passed to `run` and
gdb_reload. I've done the same change in gdb_start_cmd and
gdb_starti_cmd, although these two are not used with native-gdbserver.
I've changed all gdb_reload implementations in the tree to accept a new
inferior_args argument, although most of them don't do anything with it
(and don't need to). People maintaining target boards out of tree will
need to do the same.
I found two tests to adjust to avoid adding new failures or errors.
These tests needed new [use_gdb_stub] checks, because they rely on
having GDB run new processes. These are guarded by a [target_info
exists noargs], which made them get skipped on native-gdbserver. But
now that the native-gdbserver board supports args, this is no longer
enough.
Note that with this change, noargs and use_gdb_stub are orthogonal. It
took me a moment to grasp this, so I thought I would spell out the
different possible situations:
- !noargs and !use_gdb_stub: inferior process started by gdb, can pass
args
- noargs and !use_gdb_stub: inferior process started by gdb (perhaps
through extended-remote protocol, the simulator, some other target),
but that target doesn't support inferior arguments
- noargs and use_gdb_stub: inferior process started by some other
program to which GDB connects using the remote protocol, that program
does not support passing args to the inferior process
- !noargs and use_gdb_stub: inferior process started by some other
program to which GDB connects u sing the remote protocol, that program
supports passing args to the inferior process
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_run_cmd): Change argument from args to
inferior_args. Pass it to gdb_reload.
(gdb_start_cmd, gdb_starti_cmd): Change argument from args to
inferior_args.
(gdb_reload): Add inferior_args argument.
* config/gdbserver.exp (gdb_reload): Add inferior_args argument,
pass it to gdbserver_run.
* boards/native-gdbserver.exp: Do not set noargs.
* boards/native-extended-gdbserver.exp (gdb_reload): Add
inferior_args argument.
* boards/stdio-gdbserver-base.exp (gdb_reload): Likewise.
* gdb.base/a2-run.exp: Check for use_gdb_stub.
* gdb.base/args.exp: Likewise.
Change-Id: Ibda027c71867157852f34700342ab31edf39e4d8
Michael Weghorn [Mon, 25 May 2020 15:40:07 +0000 (11:40 -0400)]
gdbsupport: Drop now unused function 'stringify_argv'
The function did not properly escape special characters
and all uses have been replaced in previous commits, so
drop the now unused function.
gdbsupport/ChangeLog:
* common-utils.cc, common-utils.h (stringify_argv): Drop
now unused function stringify_argv
Change-Id: Id5f861f44eae1f0fbde3476a5eac23a842ed04fc
Michael Weghorn [Mon, 25 May 2020 15:39:43 +0000 (11:39 -0400)]
Use construct_inferior_arguments which handles special chars
Use the construct_inferior_arguments function instead of
stringify_argv to construct a string from the program
arguments in those places where that one is then passed
to fork_inferior (linux-low, lyn-low), since
construct_inferior_arguments properly takes care of
special characters, while stringify_argv does not.
Using construct_inferior_arguments seems "natural", since its
documentation also mentions that it "does the
same shell processing as fork_inferior".
Since construct_inferior_args has been extended to do
proper quoting for Windows shells in commit
5d60742e2dd3c9b475dce54b56043a358751bbb8
("Fix quoting of special characters for the MinGW build.",
2012-06-12), use it for the Windows case as well.
(I could not test that case myself, though.)
Adapt handling of empty args in function 'handle_v_run'
in gdbserver/server.cc to just insert an empty string
for an empty arg, since that one is now properly handled
in 'construct_inferior_arguments' already (and inserting
a "''" string in 'handle_v_run' would otherwise
cause that one to be treated as a string literally
containing two quote characters, which
'construct_inferior_args' would preserve by adding
extra escaping).
This makes gdbserver properly handle program args containing special
characters (like spaces), e.g. (example from PR25893)
$ gdbserver localhost:50505 myprogram "hello world"
now properly handles "hello world" as a single arg, not two separate
ones ("hello", "world").
gdbserver/ChangeLog:
PR gdbserver/25893
* linux-low.cc (linux_process_target::create_inferior),
lynx-low.cc (lynx_process_target::create_inferior),
win32-low.cc (win32_process_target::create_inferior): Use
construct_inferior_arguments instead of stringify_argv
to get string representation which properly escapes
special characters.
* server.cc (handle_v_run): Just pass empty program arg
as such, since any further processing is now handled via
construct_inferior_arguments.
Change-Id: Ibf963fcd51415c948840fb463289516b3479b0c3
Michael Weghorn [Mon, 25 May 2020 15:39:20 +0000 (11:39 -0400)]
nto_process_target::create_inferior: Pass args as char **
According to [1], the fifth parameter
to the 'spawnp' function is 'char * const argv[]',
so just pass the args contained in the vector as
an array right away, rather than converting that
to a C string first and passing that one.
With commit
2090129c36c7e582943b7d300968d19b46160d84
("Share fork_inferior et al with gdbserver",
2016-12-22) the type had changed from 'char **'
to 'char *', but I can't see an apparent reason for
that, and 'nto_procfs_target::create_inferior'
(in gdb/nto-procfs.c) also passes a 'char **' to
'spawnp' instead.
I do not know much about that target and cannot actually
test this, however.
The main motivation to look at this was identifying
and replacing the remaining uses of the 'stringify_argv'
function which does not properly do escaping.
[1] http://www.qnx.com/developers/docs/7.0.0/#com.qnx.doc.neutrino.lib_ref/topic/s/spawnp.html
gdbserver/ChangeLog:
* nto-low.cc (nto_process_target::create_inferior): Pass
argv to spawnp function as char **.
Change-Id: Ic46fe745c2aa1118114240d149d4156032f84344
Michael Weghorn [Mon, 25 May 2020 15:38:53 +0000 (11:38 -0400)]
gdbserver: Don't add extra NULL to program args
The vector holding the program args is passed as a parameter
to target_create_inferior, which then passes it to
stringify_argv for all platforms, where any NULL entry in
the vector is ignored, so there seems to be no reason
to actually add one after all.
(Since the intention is to replace uses of stringify_argv with
construct_inferior_arguments in a follow-up commit and that
function doesn't currently handle such NULL arguments, it
would otherwise have to be extended.)
gdbserver/ChangeLog:
* server.cc (captured_main), (handle_v_run): No longer
insert extra NULL element to args vector.
Change-Id: Ia2ef6d36814a6b11ce8b0d6e3b33248a7945e825
Michael Weghorn [Mon, 25 May 2020 15:38:32 +0000 (11:38 -0400)]
gdbsupport: Let construct_inferior_arguments take gdb::array_view param
Adapt the construct_inferior_arguments function to
take a gdb::array_view<char * const> parameter instead
of a char * array and an int indicating the length
and adapt the only call site.
This will allow calling it more simply in a follow-up
patch introducing more uses of the function.
gdbsupport/ChangeLog:
* common-inferior.cc, common-inferior.h (construct_inferior_arguments):
Adapt to take a gdb::array_view<char * const> parameter.
Adapt call site.
Change-Id: I1c6496c8c0b0eb3ef3fda96e9e3bd64c5e6cac3c
Michael Weghorn [Mon, 25 May 2020 15:38:11 +0000 (11:38 -0400)]
gdbsupport: Adapt construct_inferior_arguments
Allow construct_inferior_arguments to handle zero args
and have it return a std::string, similar to how
stringify_argv in gdbsupport/common-utils does.
Also, add a const qualifier for the second parameter,
since it is only read, not written to.
The intention is to replace existing uses of
stringify_argv by construct_inferior_arguments
in a subsequent step, since construct_inferior_arguments
properly handles special characters, while stringify_argv
doesn't.
gdbsupport/ChangeLog:
* common-inferior.cc, common-inferior.h (construct_inferior_arguments):
Adapt to handle zero args and return a std::string.
Adapt call site.
Change-Id: I126c4390a1018c7527b0b8fd545252ab8a5a7adc
Michael Weghorn [Mon, 25 May 2020 15:37:44 +0000 (11:37 -0400)]
gdb: Move construct_inferior_arguments to gdbsupport
This moves the function construct_inferior_arguments from
gdb/inferior.h and gdb/infcmd.c to gdbsupport/common-inferior.{h,cc}.
While at it, also move the function's comment to the header file
to align with current standards.
The intention is to use it from gdbserver in a follow-up commit.
gdb/ChangeLog:
* infcmd.c, inferior.h: (construct_inferior_arguments):
Moved function from here to gdbsupport/common-inferior.{h,cc}
gdbsupport/ChangeLog:
* common-inferior.h, common-inferior.cc: (construct_inferior_arguments):
Move function here from gdb/infcmd.c, gdb/inferior.h
Change-Id: Ib9290464ce8c0872f605d8829f88352d064c30d6
Tom de Vries [Mon, 25 May 2020 15:27:49 +0000 (17:27 +0200)]
[gdb/testsuite] Add comment in exec_is_pie
Add comment to exec_is_pie explaining why readelf -d output is not used.
gdb/testsuite/ChangeLog:
2020-05-25 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (exec_is_pie): Add comment.
H.J. Lu [Mon, 25 May 2020 13:45:13 +0000 (06:45 -0700)]
ld-x86-64: Pass -z notext to linker for tests with DT_TEXTREL
* testsuite/ld-x86-64/x86-64.exp: Pass -z notext to linker.
H.J. Lu [Mon, 25 May 2020 11:54:31 +0000 (04:54 -0700)]
ld: Pass -z notext to linker for tests with DT_TEXTREL
Some linker tests need DT_TEXTREL. Pass -z notext to linker for these
tests so that they will pass with DT_TEXTREL check defaulting to warning
or error.
* testsuite/ld-elf/eh6.d: Pass -z notext to linker.
* testsuite/ld-elf/ehdr_start-shared.d: Likewise.
* testsuite/ld-elf/pr19539.d: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-i386/nogot1.d: Likewise.
* testsuite/ld-i386/pr19539.d: Likewise.
* testsuite/ld-i386/pr19636-2a.d: Likewise.
* testsuite/ld-i386/pr19636-2b.d: Likewise.
* testsuite/ld-i386/pr19636-2c.d: Likewise.
* testsuite/ld-i386/pr19636-2d.d: Likewise.
* testsuite/ld-i386/pr19636-2e.d: Likewise.
* testsuite/ld-i386/pr19636-3d.d: Likewise.
* testsuite/ld-i386/pr19636-3e.d: Likewise.
* testsuite/ld-i386/pr19939b.d: Likewise.
* testsuite/ld-i386/undefweaka.d: Likewise.
* testsuite/ld-i386/undefweakb.d: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-unique/unique.exp: Likewise.
* testsuite/ld-x86-64/pie1.d: Likewise.
* testsuite/ld-x86-64/pr19539a.d: Likewise.
* testsuite/ld-x86-64/pr19539b.d: Likewise.
* testsuite/ld-x86-64/pr19636-1d.d: Likewise.
* testsuite/ld-x86-64/pr19636-1e.d: Likewise.
* testsuite/ld-x86-64/pr19807-1a.d: Likewise.
* testsuite/ld-x86-64/pr19807-1b.d: Likewise.
* testsuite/ld-x86-64/pr19807-2b.d: Likewise.
* testsuite/ld-x86-64/pr19807-2c.d: Likewise.
* testsuite/ld-x86-64/pr19807-2d.d: Likewise.
* testsuite/ld-x86-64/pr19807-2e.d: Likewise.
* testsuite/ld-x86-64/pr19939b.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
H.J. Lu [Mon, 25 May 2020 11:50:56 +0000 (04:50 -0700)]
gas: Update fr_literal access in frag for GCC 10
When access fr_literal in
struct frag {
...
/* Data begins here. */
char fr_literal[1];
};
with
char *buf = fragp->fr_fix + fragp->fr_literal;
GCC 10 gave
gas/config/tc-csky.c: In function ‘md_convert_frag’:
gas/config/tc-csky.c:4507:9: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
4507 | buf[1] = BYTE_1 (CSKYV1_INST_SUBI | (7 << 4));
| ^
Change
char *buf = fragp->fr_fix + fragp->fr_literal;
to
char *buf = fragp->fr_fix + &fragp->fr_literal[0];
to silence GCC 10 warning.
* config/tc-csky.c (md_convert_frag): Replace fragp->fr_literal
with &fragp->fr_literal[0].
* config/tc-microblaze.c (md_apply_fix): Likewise.
* config/tc-sh.c (md_convert_frag): Likewise.
Tom de Vries [Mon, 25 May 2020 10:28:54 +0000 (12:28 +0200)]
[gdb/testsuite] Fix var use in compile_and_download_n_jit_so
In commit
1b59ca1cf1 "[gdb/testsuite] Fix tcl error in jit-elf-helpers.exp", I
introduced a variable f in compile_and_download_n_jit_so, to be used in the
untested message, but actually variable binfile was used instead:
...
+ set f [file tail $binfile]
+ untested "failed to compile shared library $binfile"
...
Fix this by using $f in the untested message.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-25 Tom de Vries <tdevries@suse.de>
* lib/jit-elf-helpers.exp (compile_and_download_n_jit_so): Use $f
instead of $binfile in the untested message.
Tom de Vries [Mon, 25 May 2020 10:01:52 +0000 (12:01 +0200)]
[gdb/testsuite] Fix exec_is_pie with gold linker
When running test-case gdb.base/break-interp.exp with target board gold, we
run into:
...
gdb compile failed, pie failed to generate PIE executable
...
The problem is that the proc exec_is_pie uses the PIE flag in the readelf -d
output, which doesn't seem to be set by the gold linker.
Instead, use the "Type" field in the readelf -h output.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-25 Tom de Vries <tdevries@suse.de>
PR testsuite/26031
* lib/gdb.exp (exec_is_pie): Test readelf -h output.
Tom de Vries [Mon, 25 May 2020 10:01:52 +0000 (12:01 +0200)]
[gdb/testsuite] Add target board gold
Add a target board that uses the gold linker.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-25 Tom de Vries <tdevries@suse.de>
* boards/gold.exp: New file.
Tom Tromey [Mon, 25 May 2020 02:25:09 +0000 (20:25 -0600)]
Revert "Add completion styling"
This reverts commit
eca1f90cf47a2edc1a1cd22e12c6c0f3b900654e. Several
changes were requested, and it seemed simplest to revert it.
gdb/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
Revert commit
eca1f90c:
* NEWS: Remove entry for completion styling.
* completer.c (_rl_completion_prefix_display_length): Move
declaration later.
(gdb_fnprint): Revert.
(gdb_display_match_list_1): Likewise.
* cli/cli-style.c (completion_prefix_style)
(completion_difference_style, completion_suffix_style): Remove.
(_initialize_cli_style): Revert.
* cli/cli-style.h (completion_prefix_style)
(completion_difference_style, completion_suffix_style): Don't
declare.
gdb/doc/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Output Styling): Don't mention completion styling.
(Editing): Don't mention readline completion styling.
gdb/testsuite/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Remove completion styling test.
* lib/gdb-utils.exp (style): Remove completion styles.
GDB Administrator [Mon, 25 May 2020 00:00:06 +0000 (00:00 +0000)]
Automatic date update in version.in
Jim Wilson [Sun, 24 May 2020 23:42:21 +0000 (16:42 -0700)]
RISC-V: Gas inserts cfa relocs in wrong section.
The frag code makes a distinction between inserting frags before the frag
chains are chained together and afterward. After chaining, we need to set
now_seg before creating the frag. tc-xtensa.c has a function called
fix_new_exp_in_seg that handles this right, but switches segments twice each
time it is called. In this case, we can inline it and pull the save and
restore out of the loop to get better code.
gas/
PR 26025
* config/tc-riscv.c (riscv_pre_output_hook): Change s type from const
asection to segT. New locals seg and subseg. Call subseg_set before
fix_new_exp. Call subseg_set after loop to restore original values.
Simon Marchi [Mon, 11 May 2020 21:18:25 +0000 (17:18 -0400)]
gdb: make gdbarch.sh write gdbarch.{c,h} directly
It was suggested in this thread [1] that gdbarch.sh should write to
gdbarch.h and gdbarch.c directly. This patch implements that.
When running gdbarch.sh, we currently need to move new-gdbarch.c over
gdbarch.c and new-gdbarch.h over gdbarch.h. It might have been useful
at some point to not have gdbarch.sh overwrite gdbarch.h and gdbarch.c,
but with git it's really unnecessary. Any changes to gdbarch.sh can be
inspected using `git diff`.
A next step would be to have the Makefile automatically run gdbarch.sh
if it sees that gdbarch.c and gdbarch.h are out of date. Or maybe even
remove gdbarch.c and gdbarch.h from the tree and generate them in the
build directory when building. But that requires more thinking and
discussions, and I think that this change is already useful in itself.
[1] https://sourceware.org/pipermail/gdb-patches/2020-May/168265.html
gdb/ChangeLog;
* gdbarch.sh: Write to gdbarch.c/gdbarch.h directly. Don't
compare old and new versions.
(compare_new): Remove.
Change-Id: I7970a9e8af0afc0145cb5a28e73d94fbaa1e25b9
Pedro Alves [Sun, 24 May 2020 12:32:25 +0000 (13:32 +0100)]
Don't remove C++ aliases from completions if symbol doesn't match
completion_list_add_symbol currently tries to remove C++ function
aliases from the completions match list even if the symbol passed down
wasn't successfully added to the completion list because it didn't
match. I.e., we call cp_canonicalize_string_no_typedefs for each and
every C++ function in the program, which is useful work. This patch
skips that useless work.
gdb/ChangeLog:
2020-05-24 Pedro Alves <palves@redhat.com>
* symtab.c (completion_list_add_name): Return boolean indication
of whether the symbol matched.
(completion_list_add_symbol): Don't try to remove C++ aliases if
the symbol didn't match in the first place.
* symtab.h (completion_list_add_name): Return bool.
Fangrui Song [Thu, 21 May 2020 01:31:39 +0000 (18:31 -0700)]
ld: Handle --dynamic-list* before -Bsymbolic -Bsymbolic-functions
--dynamic-list* should work both before and after -Bsymbolic and
-Bsymbolic-functions.
PR ld/26018
* lexsup.c (parse_args): Simplify.
* testsuite/ld-elf/dl4e.out: New.
* testsuite/ld-elf/shared.exp: Updated for PR ld/26018 tests.
H.J. Lu [Sun, 24 May 2020 03:49:16 +0000 (20:49 -0700)]
ld: Add -Bsymbolic-functions tests
PR ld/26018
* testsuite/ld-i386/i386.exp: Add a -Bsymbolic-functions test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr26018.d: New file.
* testsuite/ld-x86-64/pr26018.d: Likewise.
* testsuite/ld-x86-64/pr26018.s: Likewise.
GDB Administrator [Sun, 24 May 2020 00:00:06 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Sat, 23 May 2020 21:39:54 +0000 (17:39 -0400)]
gdb: remove TYPE_FIELD macro
Replace all uses of it by type::field.
Note that since type::field returns a reference to the field, some spots
are used to assign the whole field structure. See ctfread.c, function
attach_fields_to_type, for example. This is the same as was happening
with the macro, so I don't think it's a problem, but if anybody sees a
really nicer way to do this, now could be a good time to implement it.
gdb/ChangeLog:
* gdbtypes.h (TYPE_FIELD): Remove. Replace all uses with
type::field.
Joel Brobecker [Sat, 23 May 2020 21:19:06 +0000 (14:19 -0700)]
Document the GDB 9.2 release in gdb/ChangeLog
gdb/ChangeLog:
GDB 9.2 released.
Tom Tromey [Sat, 23 May 2020 15:23:09 +0000 (09:23 -0600)]
Add completion styling
Readline has a styling feature for completion -- if it is enabled, the
common prefix of completions will be displayed in a different style.
This doesn't work in gdb, because gdb implements its own completer.
This patch implements the feature. However, it doesn't directly use
the Readline feature, because gdb can do a bit better: it can let the
user control the styling using the existing mechanisms.
This version incorporates an Emacs idea, via Eli: style the prefix,
the "difference character", and the suffix differently.
gdb/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* NEWS: Add entry for completion styling.
* completer.c (_rl_completion_prefix_display_length): Move
declaration earlier.
(gdb_fnprint): Use completion_style.
(gdb_display_match_list_1): Likewise.
* cli/cli-style.c (completion_prefix_style)
(completion_difference_style, completion_suffix_style): New
globals.
(_initialize_cli_style): Register new globals.
* cli/cli-style.h (completion_prefix_style)
(completion_difference_style, completion_suffix_style): Declare.
gdb/doc/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Output Styling): Mention completion styling.
(Editing): Mention readline completion styling.
gdb/testsuite/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add completion styling test.
* lib/gdb-utils.exp (style): Add completion styles.
Pedro Alves [Sat, 23 May 2020 11:46:37 +0000 (12:46 +0100)]
Use safe-ctype.h (ISSPACE etc.) in symbol parsing & comparison
This patch avoids depending on the current locale when parsing &
comparing symbol names, by using libiberty's safe-ctype.h uppercase
TOLOWER, ISXDIGIT, etc. macros instead of the standard ctype.h
tolower, isxdigit, etc. macros/functions.
This commit:
commit
b1b60145aedb8adcb0b9dcf43a5ae735c2f03b51
Author: Pedro Alves <palves@redhat.com>
AuthorDate: Tue May 22 17:35:38 2018 +0100
Support UTF-8 identifiers in C/C++ expressions (PR gdb/22973)
did something similar, except in the expression parser.
This can improve GDB's symbol loading performance significantly.
Currently strcmp_iw_ordered can show up high on profiles (called from
sort_pst_symbols -> std::sort) because of the isspace and tolower
functions. Hannes mentions seeing it as high as in ~24% of the
profiling samples on Windows
(https://sourceware.org/pipermail/gdb-patches/2020-May/168858.html).
I tested GDB's performance (built with "-g -O2") loading a "-g -O0"
build of gdb.
I ran GDB 10 times like:
/bin/time -f %e \
./gdb/gdb --data-directory ./gdb/data-directory -nx \
-batch /tmp/gdb-g-O0
Then I computed the mean time.
The baseline mean time was
gdb 2.515
This patch brings the number down to
gdb 2.096
Which is an around 16% improvement.
gdb/ChangeLog:
2020-05-23 Pedro Alves <palves@redhat.com>
* utils.c: Include "gdbsupport/gdb-safe-ctype.h".
(parse_escape): Use ISDIGIT instead of isdigit.
(puts_debug): Use gdb_isprint instead of isprint.
(fprintf_symbol_filtered): Use ISALNUM instead of isalnum.
(cp_skip_operator_token, skip_ws, strncmp_iw_with_mode): Use
ISSPACE instead of isspace.
(strncmp_iw_with_mode): Use TOLOWER instead of tolower and ISSPACE
instead of isspace.
(strcmp_iw_ordered): Use ISSPACE instead of isspace.
(string_to_core_addr): Use TOLOWER instead of tolower, ISXDIGIT
instead of isxdigit and ISDIGIT instead of isdigit.
gdbsupport/ChangeLog:
2020-05-23 Pedro Alves <palves@redhat.com>
* gdb-safe-ctype.h: New.
Alan Modra [Sat, 23 May 2020 07:21:30 +0000 (16:51 +0930)]
Fix potential segfault
Code in vms-lib.c leaves arch_header NULL.
* bfdio.c (bfd_get_file_size): Don't segfault on NULL arch_header.
Alan Modra [Fri, 22 May 2020 22:35:14 +0000 (08:05 +0930)]
ar many_files test
This tests for the issue fixed with git commit
0490dd41ae.
* testsuite/binutils-all/ar.exp (many_files): New test.
GDB Administrator [Sat, 23 May 2020 00:00:14 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Fri, 22 May 2020 20:55:17 +0000 (16:55 -0400)]
gdb: remove TYPE_FIELDS macro
Remove all uses of the `TYPE_FIELDS` macro. Replace them with either:
1) type::fields, to obtain a pointer to the fields array (same as
TYPE_FIELDS yields)
2) type::field, a new convenience method that obtains a reference to one
of the type's field by index. It is meant to replace
TYPE_FIELDS (type)[idx]
with
type->field (idx)
gdb/ChangeLog:
* gdbtypes.h (struct type) <field>: New method.
(TYPE_FIELDS): Remove, replace all uses with either type::fields
or type::field.
Change-Id: I49fba10114417deb502060c6156aa5f7fc62462f
Simon Marchi [Fri, 22 May 2020 20:55:16 +0000 (16:55 -0400)]
gdb: add type::fields / type::set_fields
Add the `fields` and `set_fields` methods on `struct type`, in order to
remove the `TYPE_FIELDS` macro. In this patch, the `TYPE_FIELDS` macro
is changed to the `type::fields`, so all the call sites that use it to
set the fields array are changed to use `type::set_fields`. The next
patch will remove `TYPE_FIELDS` entirely.
gdb/ChangeLog:
* gdbtypes.h (struct type) <fields, set_fields>: New methods.
(TYPE_FIELDS): Use type::fields. Change all call sites that
modify the propery to use type::set_fields instead.
Change-Id: I05174ce68f2ce3fccdf5d8b469ff141f14886b33
Simon Marchi [Fri, 22 May 2020 20:55:15 +0000 (16:55 -0400)]
gdb: remove TYPE_NFIELDS macro
Remove `TYPE_NFIELDS`, changing all the call sites to use
`type::num_fields` directly. This is quite a big diff, but this was
mostly done using sed and coccinelle. A few call sites were done by
hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_NFIELDS): Remove. Change all cal sites to use
type::num_fields instead.
Change-Id: Ib73be4c36f9e770e0f729bac3b5257d7cb2f9591
Simon Marchi [Fri, 22 May 2020 20:55:14 +0000 (16:55 -0400)]
gdb: add type::num_fields / type::set_num_fields
Add the `num_fields` and `set_num_fields` methods on `struct type`, in
order to remove the `TYPE_NFIELDS` macro. In this patch, the
`TYPE_NFIELDS` macro is changed to use `type::num_fields`, so all the
call sites that are used to set the number of fields are changed to use
`type::set_num_fields`. The next patch will remove `TYPE_NFIELDS`
completely.
I think that in the future, we should consider making the interface of
`struct type` better. For example, right now it's possible for the
number of fields property and the actual number of fields set to be out
of sync. However, I want to keep the existing behavior in this patch,
just translate from macros to methods.
gdb/ChangeLog:
* gdbtypes.h (struct type) <num_fields, set_num_fields>: New
methods.
(TYPE_NFIELDS): Use type::num_fields. Change all call sites
that modify the number of fields to use type::set_num_fields
instead.
Change-Id: I5ad9de5be4097feaf942d111077434bf91d13dc5
Tom Tromey [Fri, 22 May 2020 19:34:14 +0000 (13:34 -0600)]
Remove obsolete declaration
Commit
c9e0a7e3331 ("Remove munmap_listp_free_cleanup") removed
munmap_listp_free, but missed a declaration. This patch removes that
as well.
gdb/ChangeLog
2020-05-22 Tom Tromey <tromey@adacore.com>
* compile/compile-object-load.h (munmap_list_free): Don't
declare.
Andrew Burgess [Tue, 12 May 2020 20:29:23 +0000 (21:29 +0100)]
gdb: Restore old annotations behaviour when printing frame info
This undoes most of the changes from these commits:
commit
ec8e2b6d3051f0b4b2a8eee9917898e95046c62f
Date: Fri Jun 14 23:43:00 2019 +0100
gdb: Don't allow annotations to influence what else GDB prints
commit
0d3abd8cc936360f8c46502135edd2e646473438
Date: Wed Jun 12 22:34:26 2019 +0100
gdb: Remove an update of current_source_line and current_source_symtab
as a result of the discussion here:
https://sourceware.org/pipermail/gdb/2020-April/048468.html
Having taken time to reflect on the discussion, and reading the
documentation again I believe we should revert GDB's behaviour back to
how it used to be.
The original concern that triggered the initial patch was that when
annotations were on the current source and line were updated (inside
the annotation code), while when annotations are off this update would
not occur. This was incorrect, as printing the source with the call
to print_source_lines does also update the current source and line.
Further, the documentation here:
https://sourceware.org/gdb/current/onlinedocs/gdb/Source-Annotations.html#Source-Annotations
Clearly states:
"The following annotation is used instead of displaying source code:
^Z^Zsource filename:line:character:middle:addr
..."
So it is documented that the 'source' annotation is a replacement for,
and not in addition to, actually printing the source lie.
There are still a few issues that I can see, these are:
1. In source.c:info_line_command, when annotations are on we call
annotate_source_line, however, if annotations are off then there is
no corresponding call to print the source line. This means that a
if a user uses 'info line ...' with annotations on, and then does a
'list', they will get different results than if they had done this
with annotations off.
2. It bothers me that the call to annotate_source_line returns a
boolean, and that this controls a call to print_source_line (in
stack.c:print_frame_info).
The reason for this is that the source line annotation will only
print something if the file is found, and the line number is in
range for the file.
It seems to me like an annotation should always be printed, either
one that identifies the file and line, or one that identifies the
file and line GDB would like to access, but couldn't.
I considered changing this, but in the end decided not too, if I
extend the existing 'source' annotation to print something in all
cases then I risk breaking existing UIs that rely on the file and
line always being valid. If I add a new annotation then this might
also break existing UIs that rely on GDB itself printing the error
from within print_source_line.
Given that annotations is deprecated (as I understand it) mechanism
for UIs to interact with GDB (in favour of MI) I figure we should just
restore the old behaviour, and leave the mini-bugs in until someone
actually complains.
This isn't a straight revert of the two commits mentioned above. I've
left annotate_source_line instead of going back to the original
identify_source_line, which lived in source.c, but was really
annotation related. The API for setting the current source and line
has changed since the original patches, so I updated for that change
too. Finally I wrote the code in stack.c so that we avoided an extra
level of indentation, which I felt made things easier to read.
gdb/ChangeLog:
* annotate.c (annotate_source_line): Update return type, add call
to update current symtab and line.
* annotate.h (annotate_source_line): Update return type, and
extend header comment.
* source.c (info_line_command): Check annotation_level before
calling annotate_source_line.
* stack.c (print_frame_info): If calling annotate_source_line
returns true, then don't print any other source line information.
gdb/testsuite/ChangeLog:
* gdb.base/annota1.exp: Update expected results.
* gdb.cp/annota2.exp: Update expected results, remove duplicate
test name.
* gdb.cp/annota3.exp: Update expected results.
Alan Modra [Fri, 22 May 2020 02:12:43 +0000 (11:42 +0930)]
PowerPC: downgrade FP mismatch error for shared libraries to a warning
PR 25882
bfd/
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Don't init FP
attributes from shared libraries, and do not return an error if
they don't match.
gold/
* powerpc.cc (merge_object_attributes): Replace name param with
obj param. Update callers. Don't init FP attributes from shared
libraries, and do not emit an error if they don't match.
GDB Administrator [Fri, 22 May 2020 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Thu, 21 May 2020 17:22:10 +0000 (13:22 -0400)]
gdb: fix -Wtautological-overlap-compare error in lm32-tdep.c
Building with clang 11, we get:
/home/smarchi/src/binutils-gdb/gdb/lm32-tdep.c:84:44: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare]
return ((regnum >= SIM_LM32_EA_REGNUM) && (regnum <= SIM_LM32_BA_REGNUM))
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Indeed, this doesn't make sense, as EA_REGNUM is greater than BA_REGNUM.
I'll assume that it was just a mistake and that these two should be
swapped.
The regnums for BA and EA are contiguous, so ultimately this particular
part of the condition is only true if regnum is == EA or == BA. These
registers are Exception Address and Breakpoint Address, so I guess it
makes sense for them to be in the system register group.
The relevant reference is here:
https://www.latticesemi.com/-/media/LatticeSemi/Documents/UserManuals/JL/LatticeMico32ProcessorReferenceManual39.ashx?document_id=52077
gdb/ChangeLog:
* lm32-tdep.c (lm32_register_reggroup_p): Fix condition.
Simon Marchi [Thu, 21 May 2020 17:12:29 +0000 (13:12 -0400)]
gdb: remove unnecessary NULL checks before xfree
I was inspired by a series of patches merged by Alan Modra in the other
projects, so I did the same in GDB with a bit of Coccinelle and grep.
This patch removes the unnecessary NULL checks before calls to xfree.
They are unnecessary because xfree already does a NULL check. Since
free is supposed to handle NULL values correctly, the NULL check in
xfree itself is also questionable, but I've left it there for now.
gdb/ChangeLog:
* coffread.c (patch_type): Remove NULL check before xfree.
* corefile.c (set_gnutarget): Likewise.
* cp-abi.c (set_cp_abi_as_auto_default): Likewise.
* exec.c (build_section_table): Likewise.
* remote.c (remote_target::pass_signals): Likewise.
* utils.c (n_spaces): Likewise.
* cli/cli-script.c (document_command): Likewise.
* i386-windows-tdep.c (core_process_module_section): Likewise.
* linux-fork.c (struct fork_info) <~fork_info>: Likewise.
Alan Modra [Thu, 21 May 2020 14:04:58 +0000 (23:34 +0930)]
Re: PR25993, read of freed memory
git commit
7b958a48e132 put the bfd filename in the bfd objalloc
memory. That means the filename is freed by _bfd_free_cached_info.
Which is called by _bfd_compute_and_write_armap to tidy up symbol
tables after they are done with.
Unfortunately, _bfd_write_archive_contents wants to seek and read from
archive elements after that point, and if the number of elements
exceeds max_open_files in cache.c then some of those elements will
have their files closed. To reopen, you need the filename.
PR 25993
* opncls.c (_bfd_free_cached_info): Keep a copy of the bfd
filename.
(_bfd_delete_bfd): Free the copy.
(_bfd_new_bfd): Free nbfd->memory on error.
Alan Modra [Wed, 20 May 2020 13:17:29 +0000 (22:47 +0930)]
Replace "if (x) free (x)" with "free (x)", opcodes
cpu/
* mep.opc (mep_cgen_expand_macros_and_parse_operand): Replace
"if (x) free (x)" with "free (x)".
opcodes/
* arc-ext.c: Replace "if (x) free (x)" with "free (x)" throughout.
* sparc-dis.c: Likewise.
* tic4x-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* bpf-desc.c: Regenerate.
* epiphany-desc.c: Regenerate.
* fr30-desc.c: Regenerate.
* frv-desc.c: Regenerate.
* ip2k-desc.c: Regenerate.
* iq2000-desc.c: Regenerate.
* lm32-desc.c: Regenerate.
* m32c-desc.c: Regenerate.
* m32r-desc.c: Regenerate.
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mt-desc.c: Regenerate.
* or1k-desc.c: Regenerate.
* xc16x-desc.c: Regenerate.
* xstormy16-desc.c: Regenerate.
Alan Modra [Wed, 20 May 2020 13:20:49 +0000 (22:50 +0930)]
Replace "if (x) free (x)" with "free (x)", ld
* deffilep.y: Replace "if (x) free (x)" with "free (x)" thoughout.
* emultempl/elf.em: Likewise.
* emultempl/msp430.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/xtensaelf.em: Likewise.
* ldelf.c: Likewise.
* ldfile.c: Likewise.
* ldmain.c: Likewise.
* ldmisc.c: Likewise.
* lexsup.c: Likewise.
* pe-dll.c: Likewise.
Alan Modra [Wed, 20 May 2020 13:19:51 +0000 (22:49 +0930)]
Replace "if (x) free (x)" with "free (x)", gprof
* utils.c (print_name_only): Free demangled without checking
first for non-NULL.
Alan Modra [Wed, 20 May 2020 13:19:01 +0000 (22:49 +0930)]
Replace "if (x) free (x)" with "free (x)", gas
* atof-generic.c: Replace "if (x) free (x)" with "free (x)"
throughout.
* config/obj-elf.c: Likewise.
* config/tc-aarch64.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-m68k.c: Likewise.
* config/tc-nios2.c: Likewise.
* config/tc-tic30.c: Likewise.
* ecoff.c: Likewise.
* read.c: Likewise.
* stabs.c: Likewise.
* symbols.c: Likewise.
* testsuite/gas/all/test-gen.c: Likewise.
Alan Modra [Wed, 20 May 2020 13:18:41 +0000 (22:48 +0930)]
Replace "if (x) free (x)" with "free (x)", binutils
* addr2line.c: Replace "if (x) free (x)" with "free (x)" throughout.
* dlltool.c: Likewise.
* elfcomm.c: Likewise.
* rddbg.c: Likewise.
* readelf.c: Likewise.
* stabs.c: Likewise.
* windmc.c: Likewise.
* windres.c: Likewise.
* wrstabs.c: Likewise.
Alan Modra [Wed, 20 May 2020 07:55:20 +0000 (17:25 +0930)]
Replace "if (x) free (x)" with "free (x)", bfd
* aoutx.h: Replace "if (x) free (x)" with "free (x)" throughout.
* archive.c, * bfd.c, * bfdio.c, * coff-alpha.c, * coff-ppc.c,
* coff-sh.c, * coff-stgo32.c, * coffcode.h, * coffgen.c,
* cofflink.c, * cpu-arm.c, * doc/chew.c, * dwarf2.c, * ecoff.c,
* ecofflink.c, * elf-eh-frame.c, * elf-m10200.c, * elf-m10300.c,
* elf-strtab.c, * elf.c, * elf32-arc.c, * elf32-arm.c,
* elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-crx.c,
* elf32-epiphany.c, * elf32-ft32.c, * elf32-h8300.c,
* elf32-ip2k.c, * elf32-m32c.c, * elf32-m68hc11.c,
* elf32-m68k.c, * elf32-microblaze.c, * elf32-msp430.c,
* elf32-nds32.c, * elf32-nios2.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-sh.c, * elf32-spu.c,
* elf32-v850.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c
* elf64-mmix.c, * elf64-ppc.c, * elf64-sparc.c, * elfcode.h,
* elflink.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-mips.c,
* elfxx-x86.c, * format.c, * ihex.c, * libbfd.c, * linker.c,
* mmo.c, * opncls.c, * pdp11.c, * peXXigen.c, * pef.c,
* peicode.h, * simple.c, * som.c, * srec.c, * stabs.c, * syms.c,
* targets.c, * vms-lib.c, * xcofflink.c, * xtensa-isa.c: Likewise.
Alan Modra [Thu, 21 May 2020 00:18:35 +0000 (09:48 +0930)]
asan: readelf: wild read in get_num_dynamic_syms
* readelf.c (get_num_dynamic_syms): Bounds check mipsxlat array
access.
GDB Administrator [Thu, 21 May 2020 00:00:12 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Wed, 20 May 2020 19:44:24 +0000 (15:44 -0400)]
gdb: reset/recompute objfile section offsets in reread_symbols
This patch started as an investigation of this bug, where the program is
re-compiled between two "start" runs:
$ ./gdb -nx --data-directory=data-directory -q a.out
Reading symbols from a.out...
(gdb) start
Temporary breakpoint 1 at 0x1131: file test.c, line 1.
Starting program: /home/smarchi/build/wt/test/gdb/a.out
Temporary breakpoint 1, main () at test.c:1
1 int main() { return 0; }
*** re-compile a.out ***
(gdb) start
The program being debugged has been started already.
Start it from the beginning? (y or n) y
`/home/smarchi/build/wt/test/gdb/a.out' has changed; re-reading symbols.
Temporary breakpoint 2 at 0x555555555129: file test.c, line 1.
Starting program: /home/smarchi/build/wt/test/gdb/a.out
warning: Probes-based dynamic linker interface failed.
Reverting to original interface.
Temporary breakpoint 2, main () at test.c:1
1 int main() { return 0; }
(gdb)
To reproduce the bug, a.out needs to be a position-independent
executable (PIE).
Here's what happens:
1) We first read the symbols of a.out. The section offsets in the
objfile are all 0, so the symbols are created unrelocated.
2) The breakpoint on main is created, as you can see the breakpoint
address (derived from the `main` symbol with value 0x1129) is still
unrelocated (0x1131). Since the program is not yet started, we don't
know at which base address the executable is going to end at.
Everything good so far.
3) The execution starts, GDB finds out the executable's base address,
fills the objfile's section_offsets vector with a bunch of offsets,
and relocates the symbols with those offsets. The latter modifies
the symbol values (the `main` symbol is changed from 0x1129 to
0x555555555129).
4) We `start` again, we detect that `a.out` has changed, the
`reread_symbols` function kicks in. It tries to reset everything
in the `struct objfile` corresponding to `a.out`, except that it
leaves the `section_offsets` vector there.
5) `reread_symbols` reads the debug info (calls `read_symbols`). As the
DWARF info is read, symbols are created using the old offsets still
in `section_offsets`. For example, the `main` symbol is created with
the value 0x555555555129. Even though at this point there is no
process, so that address is bogus. There's probably more that
depends on section_offsets that is not done correctly.
6) Something in the SVR4 solib handling goes wrong, probably because
of something that went wrong in (5). I can't quite explain it (if
somebody would like to provide a more complete analysis, please go
ahead). But this is where it takes a wrong turn:
#0 elf_locate_base () at /home/smarchi/src/wt/test/gdb/solib-svr4.c:799
#1 0x000055f0a5bee6d5 in locate_base (info=<optimized out>) at /home/smarchi/src/wt/test/gdb/solib-svr4.c:848
#2 0x000055f0a5bf1771 in svr4_handle_solib_event () at /home/smarchi/src/wt/test/gdb/solib-svr4.c:1955
#3 0x000055f0a5c0ff92 in handle_solib_event () at /home/smarchi/src/wt/test/gdb/solib.c:1258
In the non-working case (without this patch), elf_locate_base returns
0, whereas in the working case (with this patch) it returns a valid
address, as we should expect.
This patch fixes this by making reread_symbols clear the
`section_offsets` vector, and re-create it by calling `sym_offsets`.
This is analogous to what syms_from_objfile_1 does. I didn't seem
absolutely necessary, but I also made it clear the various
`sect_index_*` fields, since their values no longer make sense (they
describe the old executable, and are indices in the now cleared
sections/section_offsets arrays).
I don't really like the approach taken by reread_symbols, trying to
reset everything manually on the objfile object, instead of, for
example, creating a new one from scratch. But I don't know enough yet
to propose a better solution.
One more reason I think this patch is needed is that the number of
sections of the new executable could be different from the number of
sections of the old executable. So if we don't re-create the
section_offsets array, not only we'll have wrong offsets, but we could
make accesses past the array.
Something else that silently fails (but doesn't seem to have
consequences) is the prologue analysis when we try to create the
breakpoint on `main`. Since the `main` symbol has the wrong value
0x555555555129, we try to access memory in that area, which fails. This
can be observed by debugging gdb and using `catch throw`. Before the
process is started, we need to access the memory at its unrelocated
address, 0x1129, which will read memory from the ELF file. This is now
what happens, with this patch applied.
It silently fails, probably because commit
46a62268b, "Catch exceptions
thrown from gdbarch_skip_prologue", papered over the problem and added
an empty catch clause. I'm quite sure that the root cause then was the
one fixed by this patch.
This fixes tests gdb.ada/exec_changed.exp and gdb.base/reread.exp for
me.
gdb/ChangeLog:
* symfile.c (reread_symbols): Clear objfile's section_offsets
vector and section indices, re-compute them by calling
sym_offsets.
Nelson Chu [Wed, 20 May 2020 16:22:48 +0000 (17:22 +0100)]
[PATCH v2 0/9] RISC-V: Support version controling for ISA standard extensions and CSR
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec
20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
Simon Marchi [Wed, 20 May 2020 14:50:39 +0000 (10:50 -0400)]
gdb/testsuite: check mmap ret val against MAP_FAILED
Fixup a few spots in the testsuite that use mmap to consistently check
the return value against MAP_FAILED.
One spot in gdb.base/coredump-filter.c checked against NULL, that is
wrong. The other spots either didn't check, or checked against -1.
MAP_FAILED has the value -1, at least on Linux, but it's better to check
against the documented define.
gdb/testsuite/ChangeLog:
PR gdb/26016
* gdb.base/coredump-filter.c (do_mmap): Check mmap ret val
against MAP_FAILED.
* gdb.base/coremaker.c (mmapdata): Likewise.
* gdb.base/jit-reader-host.c (main): Likewise.
* gdb.base/sym-file-loader.c (load): Likewise.
(load_shlib): Likewise.
Tom Tromey [Fri, 15 May 2020 16:25:56 +0000 (10:25 -0600)]
Fix array_char_idx.exp
Newer versions of GCC can statically initialize an array in the
array_char_idx.exp test case. This leads to a spurious failure. This
patch fixes the problem by having the test case recognize both
possible results.
I'm checking this in.
gdb/testsuite/ChangeLog
2020-05-20 Tom Tromey <tromey@adacore.com>
* gdb.ada/array_char_idx.exp: Recognize initialized array.
Tom Tromey [Tue, 5 May 2020 12:57:04 +0000 (06:57 -0600)]
Remove bound_name static from ada-lang.c
ada-lang.c has a "bound_name" static that is used when finding fields
in a structure in some cases. This patch removes it in favor of
computing the desired field name at runtime; this avoids an artificial
limit.
I'm checking this in. Tested on x86-64 Fedora 30, and also on the
internal AdaCore test suite.
gdb/ChangeLog
2020-05-20 Tom Tromey <tromey@adacore.com>
* ada-lang.c (bound_name, MAX_ADA_DIMENS): Remove.
(desc_one_bound, desc_index_type): Compute field name.
Nick Clifton [Wed, 20 May 2020 10:43:56 +0000 (11:43 +0100)]
Fix thinko in bfd ChangeLog entry
Tom de Vries [Wed, 20 May 2020 09:48:39 +0000 (11:48 +0200)]
[gdb/symtab] Handle .gdb_index in ada language mode
When running test-case gdb.base/with.exp with target board cc-with-gdb-index,
we have:
...
(gdb) PASS: gdb.base/with.exp: basics: show language
with language ada -- print g_s^M
'g_s' has unknown type; cast it to its declared type^M
(gdb) FAIL: gdb.base/with.exp: basics: with language ada -- print g_s
...
This is due to this bit in dw2_map_matching_symbols:
...
if (dwarf2_per_objfile->index_table != nullptr)
{
/* Ada currently doesn't support .gdb_index (see PR24713). We can get
here though if the current language is Ada for a non-Ada objfile
using GNU index. As Ada does not look for non-Ada symbols this
function should just return. */
return;
}
...
While the reasoning in the comment may be sound from language perspective, it
does introduce an inconsistency in gdb behaviour between:
- having a .gdb_index section, and
- having a .gdb_names section, or a partial symtab, or -readnow.
Fix the inconsistency by completing implementation of
dw2_map_matching_symbols.
Tested on x86_64-linux, both with native and target board
cc-with-debug-index.
gdb/ChangeLog:
2020-05-20 Tom de Vries <tdevries@suse.de>
PR symtab/25833
* dwarf2/read.c (dw2_map_matching_symbols): Handle .gdb_index.
gdb/testsuite/ChangeLog:
2020-05-20 Tom de Vries <tdevries@suse.de>
PR symtab/25833
* gdb.base/with-mf-inc.c: New test.
* gdb.base/with-mf-main.c: New test.
* gdb.base/with-mf.exp: New file.
Alan Modra [Tue, 19 May 2020 03:28:59 +0000 (12:58 +0930)]
PR25993, read of freed memory
ldmain.c:add_archive_element copies file name pointers from the bfd to
a lang_input_statement_type.
input->filename = abfd->filename;
input->local_sym_name = abfd->filename;
This results in stale pointers when twiddling the bfd filename in
places like the pe ld after_open. So don't free the bfd filename,
and make copies using bfd_alloc memory that won't result in small
memory leaks that annoy memory checkers.
PR 25993
bfd/
* archive.c (_bfd_get_elt_at_filepos): Don't strdup filename,
use bfd_set_filename.
* elfcode.h (_bfd_elf_bfd_from_remote_memory): Likewise.
* mach-o.c (bfd_mach_o_fat_member_init): Likewise.
* opncls.c (bfd_fopen, bfd_openstreamr, bfd_openr_iovec, bfd_openw),
(bfd_create): Likewise.
(_bfd_delete_bfd): Don't free filename.
(bfd_set_filename): Copy filename param to bfd_alloc'd memory,
return pointer to the copy or NULL on alloc fail.
* vms-lib.c (_bfd_vms_lib_get_module): Free newname and test
result of bfd_set_filename.
* bfd-in2.h: Regenerate.
gdb/
* solib-darwin.c (darwin_bfd_open): Don't strdup pathname for
bfd_set_filename.
* solib-aix.c (solib_aix_bfd_open): Use std::string for name
passed to bfd_set_filename.
* symfile-mem.c (add_vsyscall_page): Likewise for string
passed to symbol_file_add_from_memory.
(symbol_file_add_from_memory): Make name param a const char* and
don't strdup.
ld/
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Don't copy
other_bfd_filename for bfd_set_filename, and test result of
bfd_set_filename call. Don't create a new is->filename, simply
copy from bfd filename. Free new_name after bfd_set_filename.
* emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise.
GDB Administrator [Wed, 20 May 2020 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Peter Bergner [Tue, 19 May 2020 23:09:51 +0000 (18:09 -0500)]
Power10 dcbf, sync, and wait extensions.
opcodes/
* ppc-opc.c (insert_ls, extract_ls): Handle 3-bit L fields and new
WC values on POWER10 sync, dcbf and wait instructions.
(insert_pl, extract_pl): New functions.
(L2OPT, LS, WC): Use insert_ls and extract_ls.
(LS3): New , 3-bit L for sync.
(LS3, L3OPT): New, 3-bit L for sync and dcbf.
(SC2, PL): New, 2-bit SC and PL for sync and wait.
(XWCPL_MASK, XL3RT_MASK, XSYNCLS_MASK): New instruction masks.
(XOPL3, XWCPL, XSYNCLS): New opcode macros.
(powerpc_opcodes) <dcbflp, dcbfps, dcbstps pause_short, phwsync,
plwsync, stcisync, stncisync, stsync, waitrsv>: New extended mnemonics.
<wait>: Enable PL operand on POWER10.
<dcbf>: Enable L3OPT operand on POWER10.
<sync>: Enable SC2 operand on POWER10.
gas/
* testsuite/gas/ppc/power9.s <dcbf, dcbfl, dcbflp>: Add tests.
* testsuite/gas/ppc/power9.d: Likewise.
* testsuite/gas/ppc/power10.s <dcbf, dcbfps, dcbstps, hwsync, lwsync,
pause_short, phwsync, plwsync, ptesync, stcisync, stncisync, stsync,
sync, wait, waitrsv>: Add tests.
* testsuite/gas/ppc/power10.d: Likewise.
Alan Modra [Tue, 19 May 2020 22:25:56 +0000 (07:55 +0930)]
PR26011, excessive memory allocation with fuzzed reloc sections
Check sizes early, before users of slurp_relocs allocate buffers for
the swapped in relocs.
PR 26011
* elf.c (_bfd_elf_get_reloc_upper_bound): Sanity check reloc
section size against file size.
(_bfd_elf_get_dynamic_reloc_upper_bound): Likewise.
Alan Modra [Tue, 19 May 2020 22:29:00 +0000 (07:59 +0930)]
Use bfd_get_filename throughout gdb
This patch makes gdb use the inline accessor for all bfd->filename
read accesses.
* coff-pe-read.c (read_pe_exported_syms): Use bfd_get_filename
rather than accessing bfd->filename directly.
* dtrace-probe.c (dtrace_static_probe_ops::get_probes): Likewise,
and use bfd_section_name.
* dwarf2/frame.c (decode_frame_entry): Likewise.
* exec.c (exec_set_section_address): Likewise.
* solib-aix.c (solib_aix_bfd_open): Likewise.
* stap-probe.c (get_stap_base_address): Likewise.
* symfile.c (reread_symbols): Likewise.
Tom Tromey [Tue, 19 May 2020 19:41:03 +0000 (13:41 -0600)]
Restore missing Rust test
An earlier patch inadvertently broke a Rust test. This restores it.
gdb/testsuite/ChangeLog
2020-05-19 Tom Tromey <tromey@adacore.com>
* gdb.rust/simple.exp: Restore missing test result.
Tom de Vries [Tue, 19 May 2020 18:48:53 +0000 (20:48 +0200)]
[gdb/testsuite] Fix typo in gdb.base/gdb-caching-proc.exp
Fix intial -> initial typo.
gdb/testsuite/ChangeLog:
2020-05-19 Tom de Vries <tdevries@suse.de>
* gdb.base/gdb-caching-proc.exp: Fix typo.
Tom Tromey [Tue, 19 May 2020 18:27:19 +0000 (12:27 -0600)]
Fix duplicate tests in gdb.rust
gdb.rust complains about some duplicate test names. This patch fixes
this in a straightforward way.
2020-05-19 Tom Tromey <tromey@adacore.com>
* gdb.rust/simple.exp: Add some test descriptions.
(test_one_slice): Use with_test_prefix.
Tom Tromey [Tue, 19 May 2020 18:34:35 +0000 (12:34 -0600)]
Update call to target_fileio_open
An earlier patch changed target_fileio_open, but missed a caller.
This patch fixes it.
2020-05-19 Tom Tromey <tromey@adacore.com>
* sparc64-tdep.c (adi_tag_fd): Update call to target_fileio_open.
Simon Marchi [Tue, 19 May 2020 18:20:23 +0000 (14:20 -0400)]
gdb: fix off-by-one error in quirk_rust_enum
Found by inspection, so I don't have a test for it (I don't think it
would be easy to have this bug cause a failure reliably).
We allocate space for N fields into `new_fields`, then memcpy N fields
at `new_fields + 1`. This overflows the allocated buffer by one field.
Fix it by allocating `N + 1` fields.
gdb/ChangeLog:
* dwarf2/read.c (quirk_rust_enum): Allocate enough fields.
Pedro Alves [Tue, 19 May 2020 17:36:24 +0000 (18:36 +0100)]
Make exec-file-mismatch compare build IDs
The patch makes GDB do exec-file-mismatch validation by comparing
build IDs instead of the current method of comparing filenames.
Currently, the exec-file-mismatch feature simply compares filenames to
decide whether the exec file loaded in gdb and the exec file the
target reports is running match. This causes false positives when
remote debugging, because it'll often be the case that the paths in
the host and the target won't match. And of course misses the case of
the files having the same name but being actually different files
(e.g., different builds).
This also broke many testcases when running against gdbserver, causing
tests to be skipped like (here native-extended-gdbserver):
(gdb) run
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n) UNTESTED: gdb.base/argv0-symlink.exp: could not run to main
or to fail like (here native-gdbserver):
(gdb) spawn /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/../../gdbserver/gdbserver --once localhost:2346 /home/pedro/gdb/binutils-gdb/build/gdb/te
stsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
Process /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x created; pid = 20040
Listening on port 2346
target remote localhost:2346
Remote debugging using localhost:2346
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/temp/19968/skip_btrace_tests-19968.x
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x"? (y or n) Quit
(gdb) UNSUPPORTED: gdb.btrace/buffer-size.exp: target does not support record-btrace
The former case is about GDB not realizing the two files are the same,
because one of the them is a symlink to the other. The latter case is
about GDB realizing that one file is a copy of the other.
Over the years, the toolchain has settled on build ID matching being
the canonical method to match core dumps to executables, and
executables with no debug info to their debug info.
This patch makes us use build IDs to match the running image of a
binary with its version loaded in gdb, which may or may not have debug
info. This is very much like the core dump/executable matching.
The change to gdb_bfd_open is necessary to get rid of the "transfers
from remote targets can be slow" warning when we open the remote file
to read its build ID:
(gdb) r
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
Reading /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n)
While trying this out, I was worried that bfd would read a lot of
stuff from the binary in order to extract the build ID, making it
potentially slow, but turns out we don't read all that much. Maybe a
couple hundred bytes, and most of it seemingly is the read-ahead
cache. So I'm not worried about that. Otherwise I'd consider whether
a new qXfer:buildid:read would be better. But I'm happy that we
seemingly don't need to worry about it.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* NEWS (set exec-file-mismatch): Adjust entry.
* exec.c: Include "build-id.h".
(validate_exec_file): Try to match build IDs instead of filenames.
* gdb_bfd.c (struct gdb_bfd_open_closure): New.
(gdb_bfd_iovec_fileio_open): Adjust to use gdb_bfd_open_closure
and pass down 'warn_if_slow'.
(gdb_bfd_open): Add 'warn_if_slow' parameter. Use
gdb_bfd_open_closure to pass it down.
* gdb_bfd.h (gdb_bfd_open): Add 'warn_if_slow' parameter.
gdb/doc/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Attach): Update exec-file-mismatch description to
mention build IDs.
(Separate Debug Files): Add "build id" anchor.
Pedro Alves [Tue, 19 May 2020 17:36:24 +0000 (18:36 +0100)]
Eliminate target_fileio_open_warn_if_slow
This basically makes target_fileio_open_1 extern, renamed to
target_fileio_open, and eliminates the current
target_fileio_open_warn_if_slow and target_fileio_open.
A following parameter will want to change gdb_bfd_iovec_fileio_open,
the only caller of target_fileio_open_warn_if_slow, to pass down
"warn_if_slow" true/false from the caller, instead of hardcoding
"warn_if_slow" true.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb_bfd.c (gdb_bfd_iovec_fileio_open): Adjust.
* target.c (target_fileio_open_1): Rename to target_fileio_open
and make extern. Use bool.
(target_fileio_open, target_fileio_open_warn_if_slow): Delete.
(target_fileio_read_alloc_1): Adjust.
* target.h (target_fileio_open): Add 'warn_if_slow' parameter.
(target_fileio_open_warn_if_slow): Delete declaration.
This page took 0.057152 seconds and 4 git commands to generate.